Probing the assembly of the 3' major domain of 16 S rRNA. Interactions involving ribosomal proteins S2, S3, S10, S13 and S14

A disease associated mutant reveals how Ltv1 orchestrates RP assembly and rRNA folding of the small ribosomal subunit head

Ribosomes are complex macromolecules assembled from 4 rRNAs and 79 ribosomal proteins (RPs). Their assembly is organized in a highly hierarchical manner, which is thought to avoid dead-end pathways, thereby enabling efficient assembly of ribosomes in the large quantities needed for healthy cellular growth. Moreover, hierarchical assembly also can help ensure that each RP is included in the mature ribosome. Nonetheless, how this hierarchy is achieved remains unknown, beyond the examples that depend on direct RP-RP interactions, which account for only a fraction of the observed dependencies. Using assembly of the small subunit head and a disease-associated mutation in the assembly factor Ltv1 as a model system, we dissect here how the hierarchy in RP binding is constructed. A combination of data from yeast genetics, mass spectrometry, DMS probing and biochemical experiments demonstrate that the LIPHAK-disease-associated Ltv1 mutation leads to global defects in head assembly, which are explained by direct binding of Ltv1 to 5 out of 15 RPs, and indirect effects that affect 4 additional RPs. These indirect effects are mediated by conformational transitions in the nascent subunit that are regulated by Ltv1. Mechanistically, Ltv1 aids the recruitment of some RPs via direct protein-protein interactions, but surprisingly also delays the recruitment of other RPs. Delayed binding of key RPs also delays the acquisition of RNA structure that is stabilized by these proteins. Finally, our data also indicate direct roles for Ltv1 in chaperoning the folding of a key rRNA structural element, the three-helix junction j34-35-38. Thus, Ltv1 plays critical roles in organizing the order of both RP binding to rRNA and rRNA folding, thereby enabling efficient 40S subunit assembly.

40S ribosomal protein S18 is a novel maternal peptidoglycan-binding protein that protects embryos of zebrafish from bacterial infections

Previous studies have shown that ribosomal proteins play important roles in ribosome assembly and protein translation, but other biological functions remain ill-defined. Here it is clearly demonstrated that RPS18 is a newly identified PGN-binding protein which is present abundantly in the eggs/embryos of zebrafish. Recombinant RPS18 not only identifies the bacterial signature molecule PGN, LPS, and LTA, and binds the bacteria as a pattern recognition receptor, but also kills the Gram-positive and Gram-negative bacteria as an antibacterial effector molecule. What is important is that, we reveal that microinjection of rRPS18 into early embryos significantly improved the resistance of the embryos against pathogenic Aeromonas hydrophila challenge, and co-injection of anti-RPS18 antibody could markedly reduced this improved bacterial resistance. In summary, these results indicate that RPS18 is a maternal immune factor that can protect the early embryos of zebrafish against pathogenic attacks. This work also provides another angle for understanding the biological functions of ribosomal proteins.

Genome-Wide Approaches for RNA Structure Probing

RNA molecules of all types fold into complex secondary and tertiary structures that are important for their function and regulation. Structural and catalytic RNAs such as ribosomal RNA (rRNA) and transfer RNA (tRNA) are central players in protein synthesis, and only function through their proper folding into intricate three-dimensional structures. Studies of messenger RNA (mRNA) regulation have also revealed that structural elements embedded within these RNA species are important for the proper regulation of their total level in the transcriptome. More recently, the discovery of microRNAs (miRNAs) and long non-coding RNAs (lncRNAs) has shed light on the importance of RNA structure to genome, transcriptome, and proteome regulation. Due to the relatively small number, high conservation, and importance of structural and catalytic RNAs to all life, much early work in RNA structure analysis mapped out a detailed view of these molecules. Computational and physical methods were used in concert with enzymatic and chemical structure probing to create high-resolution models of these fundamental biological molecules. However, the recent expansion in our knowledge of the importance of RNA structure to coding and regulatory RNAs has left the field in need of faster and scalable methods for high-throughput structural analysis. To address this, nuclease and chemical RNA structure probing methodologies have been adapted for genome-wide analysis. These methods have been deployed to globally characterize thousands of RNA structures in a single experiment. Here, we review these experimental methodologies for high-throughput RNA structure determination and discuss the insights gained from each approach.

A single missense mutation in a coiled-coil domain of Escherichia coli ribosomal protein S2 confers a thermosensitive phenotype that can be suppressed by ribosomal protein S1

Ribosomal protein S2 is an essential component of translation machinery, and its viable mutated variants conferring distinct phenotypes serve as a valuable tool in studying the role of S2 in translation regulation. One of a few available rpsB mutants, rpsB1, shows thermosensitivity and ensures enhanced expression of leaderless mRNAs. In this study, we identified the nature of the rpsB1 mutation. Sequencing of the rpsB1 allele revealed a G-to-A transition in the part of the rpsB gene which encodes a coiled-coil domain of S2. The resulting E132K substitution resides in a highly conserved site, TKKE, a so-called N-terminal capping box, at the beginning of the second alpha helix. The protruding coiled-coil domain of S2 is known to provide binding with 16S rRNA in the head of the 30S subunit and, in addition, to interact with a key mRNA binding protein, S1. Molecular dynamics simulations revealed a detrimental impact of the E132K mutation on the coiled-coil structure and thereby on the interactions between S2 and 16S rRNA, providing a clue for the thermosensitivity of the rpsB1 mutant. Using a strain producing a leaderless lacZ transcript from the chromosomal lac promoter, we demonstrated that not only the rpsB1 mutation generating S2/S1-deficient ribosomes but also the rpsA::IS10 mutation leading to partial deficiency in S1 alone increased translation efficiency of the leaderless mRNA by about 10-fold. Moderate overexpression of S1 relieved all these effects and, moreover, suppressed the thermosensitive phenotype of rpsB1, indicating the role of S1 as an extragenic suppressor of the E132K mutation.

Differential assembly of 16S rRNA domains during 30S subunit formation

Rapid and accurate assembly of the ribosomal subunits, which are responsible for protein synthesis, is required to sustain cell growth. Our best understanding of the interaction of 30S ribosomal subunit components (16S ribosomal RNA [rRNA] and 20 ribosomal proteins [r-proteins]) comes from in vitro work using Escherichia coli ribosomal components. However, detailed information regarding the essential elements involved in the assembly of 30S subunits still remains elusive. Here, we defined a set of rRNA nucleotides that are critical for the assembly of the small ribosomal subunit in E. coli. Using an RNA modification interference approach, we identified 54 nucleotides in 16S rRNA whose modification prevents the formation of a functional small ribosomal subunit. The majority of these nucleotides are located in the head and interdomain junction of the 30S subunit, suggesting that these regions are critical for small subunit assembly. In vivo analysis of specific identified sites, using engineered mutations in 16S rRNA, revealed defective protein synthesis capability, aberrant polysome profiles, and abnormal 16S rRNA processing, indicating the importance of these residues in vivo. These studies reveal that specific segments of 16S rRNA are more critical for small subunit assembly than others, and suggest a hierarchy of importance.

S16 throws a conformational switch during assembly of 30S 5' domain

Rapid and accurate assembly of new ribosomal subunits is essential for cell growth. Here, we show that the ribosomal proteins make assembly more cooperative by discriminating against non-native conformations of the E. coli 16S rRNA. We used hydroxyl radical footprinting to measure how much the proteins stabilize individual rRNA tertiary interactions, revealing the free energy landscape for assembly of the 16S 5′ domain. When ribosomal proteins S4, S17, and S20 bind the 5′ domain RNA, a native and a non-native assembly intermediate are equally populated. The secondary assembly protein S16 suppresses the non-native intermediate, smoothing the path to the native complex. In the final step of 5′ domain assembly, S16 drives a conformational switch at helix 3 that stabilizes pseudoknots in the 30S decoding center. Long-range communication between the S16 binding site and the decoding center helps explain the critical role of S16 in 30S assembly.

A new regulatory circuit in ribosomal protein operons: S2-mediated control of the rpsB-tsf expression in vivo

Autogenous regulation is a general strategy of balancing ribosomal protein synthesis in bacteria. Control mechanisms have been studied in detail for most of ribosomal protein operons, except for rpsB-tsf encoding essential r-protein S2 and elongation factor Ts, where even the promoter has remained unknown. By using single-copy translational fusions with the chromosomal lacZ gene and Western-blot analysis, we demonstrate here that S2 serves as a negative regulator of both rpsB and tsf expression in vivo, acting at a single target within the rpsB 5'-untranslated region (5'-UTR). As determined by primer extension, transcription of the Escherichia coli rpsB-tsf operon starts 162 nucleotides upstream of the rpsB initiation codon at a single promoter TGTGGTATAAA belonging to the extended -10 promoter class. Both the promoter signature and the 5'-UTR structure of the rpsB gene appear to be highly conserved in gamma-proteobacteria. Deletion analysis of the rpsB 5'-UTR within rpsB'-'lacZ fusions has revealed that an operator region involved in the S2 autoregulation comprises conserved structural elements located upstream of the rpsB ribosome binding site. The S2-mediated autogenous control is impaired in rpsB mutants and, more surprisingly, in the rpsA mutant producing decreased amounts of truncated r-protein S1 (rpsAIS10), indicating that S2 might act as a repressor in cooperation with S1.

DMS footprinting of structured RNAs and RNA-protein complexes

We describe a protocol in which dimethyl sulfate (DMS) modification of the base-pairing faces of unpaired adenosine and cytidine nucleotides is used for structural analysis of RNAs and RNA-protein complexes (RNPs). The protocol is optimized for RNAs of small to moderate size (< or = 500 nt). The RNA or RNP is first exposed to DMS under conditions that promote formation of the folded structure or complex, as well as 'control' conditions that do not allow folding or complex formation. The positions and extents of modification are then determined by primer extension, polyacrylamide gel electrophoresis and quantitative analysis. From changes in the extent of modification upon folding or protein binding (appearance of a 'footprint'), it is possible to detect local changes in the secondary and tertiary structure of RNA, as well as the formation of RNA-protein contacts. This protocol takes 1.5-3 d to complete, depending on the type of analysis used.

A novel single amino acid change in small subunit ribosomal protein S5 has profound effects on translational fidelity

S5 is a small subunit ribosomal protein (r-protein) linked to the functional center of the 30S ribosomal subunit. In this study we have identified a unique amino acid mutation in Escherichia coli S5 that produces spectinomycin-resistance and cold sensitivity. This mutation significantly alters cell growth, folding of 16S ribosomal RNA, and translational fidelity. While translation initiation is not affected, both +1 and -1 frameshifting and nonsense suppression are greatly enhanced in the mutant strain. Interestingly, this S5 ribosome ambiguity-like mutation is spatially remote from previously identified S5 ribosome ambiguity (ram) mutations. This suggests that the mechanism responsible for ram phenotypes in the novel mutant strain is possibly distinct from those proposed for other known S5 (and S4) ram mutants. This study highlights the importance of S5 in ribosome function and cell physiology, and suggests that translational fidelity can be regulated in multiple ways.

Analysis of Conformational Changes in 16S rRNA During the Course of 30S Subunit Assembly

Ribosome biogenesis involves an integrated series of binding events coupled with conformational changes that ultimately result in the formation of a functional macromolecular complex. In vitro, Escherichia coli 30 S subunit assembly occurs in a cooperative manner with the ordered addition of 20 ribosomal proteins (r-proteins) with 16 S rRNA. The assembly pathway for 30 S subunits has been dissected in vitro into three steps, where specific r-proteins associate with 16 S rRNA early in 30 S subunit assembly, followed by a mid-assembly conformational rearrangement of the complex that then enables the remaining r-proteins to associate in the final step. Although the three steps of 30 S subunit assembly have been known for some time, few details have been elucidated about changes that occur as a result of these three specific stages. Here, we present a detailed analysis of the concerted early and late stages of small ribosomal subunit assembly. Conformational changes, roles for base-pairing and r-proteins at specific stages of assembly, and a polar nature to the assembly process have been revealed. This work has allowed a more comprehensive and global view of E.coli 30 S ribosomal subunit assembly to be obtained.

Nonbridging phosphate oxygens in 16S rRNA important for 30S subunit assembly and association with the 50S ribosomal subunit

Ribosomes are composed of RNA and protein molecules that associate together to form a supramolecular machine responsible for protein biosynthesis. Detailed information about the structure of the ribosome has come from the recent X-ray crystal structures of the ribosome and the ribosomal subunits. However, the molecular interactions between the rRNAs and the r-proteins that occur during the intermediate steps of ribosome assembly are poorly understood. Here we describe a modification-interference approach to identify nonbridging phosphate oxygens within 16S rRNA that are important for the in vitro assembly of the Escherichia coli 30S small ribosomal subunit and for its association with the 50S large ribosomal subunit. The 30S small subunit was reconstituted from phosphorothioate-substituted 16S rRNA and small subunit proteins. Active 30S subunits were selected by their ability to bind to the 50S large subunit and form 70S ribosomes. Analysis of the selected population shows that phosphate oxygens at specific positions in the 16S rRNA are important for either subunit assembly or for binding to the 50S subunit. The X-ray crystallographic structures of the 30S subunit suggest that some of these phosphate oxygens participate in r-protein binding, coordination of metal ions, or for the formation of intersubunit bridges in the mature 30S subunit. Interestingly, however, several of the phosphate oxygens identified in this study do not participate in any interaction in the mature 30S subunit, suggesting that they play a role in the early steps of the 30S subunit assembly.

Assembly of the 30S ribosomal subunit: positioning ribosomal protein S13 in the S7 assembly branch

Studies of Escherichia coli 30S ribosomal subunit assembly have revealed a hierarchical and cooperative association of ribosomal proteins with 16S ribosomal RNA; these results have been used to compile an in vitro 30S subunit assembly map. In single protein addition and omission studies, ribosomal protein S13 was shown to be dependent on the prior association of ribosomal protein S20 for binding to the ribonucleoprotein particle. While the overwhelming majority of interactions revealed in the assembly map are consistent with additional data, the dependency of S13 on S20 is not. Structural studies position S13 in the head of the 30S subunit > 100 A away from S20, which resides near the bottom of the body of the 30S subunit. All of the proteins that reside in the head of the 30S subunit, except S13, have been shown to be part of the S7 assembly branch, that is, they all depend on S7 for association with the assembling 30S subunit. Given these observations, the assembly requirements for S13 were investigated using base-specific chemical footprinting and primer extension analysis. These studies reveal that S13 can bind to 16S rRNA in the presence of S7, but not S20. Additionally, interaction between S13 and other members of the S7 assembly branch have been observed. These results link S13 to the 3' major domain family of proteins, and the S7 assembly branch, placing S13 in a new location in the 30S subunit assembly map where its position is in accordance with much biochemical and structural data.

Mapping structural differences between 30S ribosomal subunit assembly intermediates

Under appropriate conditions, functional Escherichia coli 30S ribosomal subunits assemble in vitro from purified components. However, at low temperatures, assembly stalls, producing an intermediate (RI) that sediments at 21S and is composed of 16S ribosomal RNA (rRNA) and a subset of ribosomal proteins (r-proteins). Incubation of RI at elevated temperatures produces a particle, RI*, of similar composition but different sedimentation coefficient (26S). Once formed, RI* rapidly associates with the remaining r-proteins to produce mature 30S subunits. To understand the nature of this transition from RI to RI*, changes in the reactivity of 16S rRNA between these two states were monitored by chemical modification and primer extension analysis. Evaluation of this data using structural and biochemical information reveals that many changes are r-protein-dependent and some are clustered in functional regions, suggesting that this transition is an important step in functional 30S subunit formation.

A structural model for the assembly of the 30S subunit of the ribosome

The order in which proteins bind to 16S rRNA, the assembly map, was determined by Nomura and co-workers in the early 1970s. The assembly map shows the dependencies of binding of successive proteins but fails to address the relationship of these dependencies to the three-dimensional folding of the ribosome. Here, using molecular mechanics techniques, we rationalize the order of protein binding in terms of ribosomal folding. We determined the specific contacts between the ribosomal proteins and 16S rRNA from a crystal structure of the 30S subunit (1FJG). We then used these contacts as restraints in a rigid body Monte-Carlo simulation with reduced-representation models of the RNA and proteins. Proteins were added sequentially to the RNA in the order that they appear in the assembly map. Our results show that proteins nucleate the folding of the head, platform, and body domains, but they do not strongly restrict the orientations of the domains relative to one another. We also examined the contributions of individual proteins to the formation of binding sites for sequential proteins in the assembly process. Binding sites for the primary binding proteins are generally more ordered in the naked RNA than those for other proteins. Furthermore, we examined one pathway in the assembly map and found that the addition of early binding proteins helps to organize the RNA around the binding sites of proteins that bind later. It appears that the order of assembly depends on the degree of pre-organization of each protein's binding site at a given stage of assembly, and the impact that the binding of each protein has on the organization of the remaining unoccupied binding sites.

Assembly of the 30S ribosomal subunit

Ribosomes are large macromolecular complexes responsible for cellular protein synthesis. The smallest known cytoplasmic ribosome is found in prokaryotic cells; these ribosomes are about 2.5 MDa and contain more than 4000 nucleotides of RNA and greater than 50 proteins. These components are distributed into two asymmetric subunits. Recent advances in structural studies of ribosomes and ribosomal subunits have revealed intimate details of the interactions within fully assembled particles. In contrast, many details of how these massive ribonucleoprotein complexes assemble remain elusive. The goal of this review is to discuss some crucial aspects of 30S ribosomal subunit assembly.

The S18 ribosomal protein is a putative substrate for Ca2+/calmodulin-activated protein kinase II

The delta-isoform of Ca(2+)/calmodulin-activated protein kinase II (CaMK II) is abundantly expressed in vascular smooth muscle, but relatively little is known about its regulation or its potential cellular substrates. There are few, if any, known substrates of CaMK II that are physiologically relevant in vascular smooth muscle cells. Studies presented earlier (Mishra-Gorur, K., Singer, H. A., and Castellot, J. J., Jr. (2002) Am. J. Pathol., in press) by our laboratory show an inhibitory effect of heparin on CaMK II phosphorylation and activity. During these studies we observed the specific co-immunoprecipitation of a 20-kDa protein with CaMK II. Purification and sequence analysis indicate that this protein is the S18 protein of the 40 S ribosome. S18 was found to be abundantly phosphorylated in response to serum treatment, and this effect was strongly inhibited by heparin. In addition, KN-93, a specific CaMK II inhibitor, blocks S18 phosphorylation in vascular smooth muscle cells; a concomitant 24% reduction in protein synthesis was observed. Taken together these data support the idea that S18 could be a novel substrate for CaMK II, thus providing a potential link between Ca(2+)-mobilizing agents and protein translation.

Crystal structure of the 30 S ribosomal subunit from Thermus thermophilus: structure of the proteins and their interactions with 16 S RNA

We present a detailed analysis of the protein structures in the 30 S ribosomal subunit from Thermus thermophilus, and their interactions with 16 S RNA based on a crystal structure at 3.05 A resolution. With 20 different polypeptide chains, the 30 S subunit adds significantly to our data base of RNA structure and protein-RNA interactions. In addition to globular domains, many of the proteins have long, extended regions, either in the termini or in internal loops, which make extensive contact to the RNA component and are involved in stabilizing RNA tertiary structure. Many ribosomal proteins share similar alpha+beta sandwich folds, but we show that the topology of this domain varies considerably, as do the ways in which the proteins interact with RNA. Analysis of the protein-RNA interactions in the context of ribosomal assembly shows that the primary binders are globular proteins that bind at RNA multihelix junctions, whereas proteins with long extensions assemble later. We attempt to correlate the structure with a large body of biochemical and genetic data on the 30 S subunit.

Structure of functionally activated small ribosomal subunit at 3.3 angstroms resolution

The small ribosomal subunit performs the decoding of genetic information during translation. The structure of that from Thermus thermophilus shows that the decoding center, which positions mRNA and three tRNAs, is constructed entirely of RNA. The entrance to the mRNA channel will encircle the message when a latch-like contact closes and contributes to processivity and fidelity. Extended RNA helical elements that run longitudinally through the body transmit structural changes, correlating events at the particle's far end with the cycle of mRNA translocation at the decoding region. 96% of the nucleotides were traced and the main fold of all proteins was determined. The latter are either peripheral or appear to serve as linkers. Some may assist the directionality of translocation.

Tagging ribosomal protein S7 allows rapid identification of mutants defective in assembly and function of 30 S subunits

Ribosomal protein S7 nucleates folding of the 16 S rRNA 3' major domain, which ultimately forms the head of the 30 S ribosomal subunit. Recent crystal structures indicate that S7 lies on the interface side of the 30 S subunit, near the tRNA binding sites of the ribosome. To map the functional surface of S7, we have tagged the protein with a Protein Kinase A recognition site and engineered alanine substitutions that target each exposed, conserved residue. We have also deleted conserved features of S7, using its structure to guide our design. By radiolabeling the tag sequence using Protein Kinase A, we are able to track the partitioning of each mutant protein into 30 S, 70 S, and polyribosome fractions in vivo. Overexpression of S7 confers a growth defect, and we observe a striking correlation between this phenotype and proficiency in 30 S subunit assembly among our collection of mutants. We find that the side chain of K35 is required for efficient assembly of S7 into 30 S subunits in vivo, whereas those of at least 17 other conserved exposed residues are not required. In addition, an S7 derivative lacking the N-terminal 17 residues causes ribosomes to accumulate on mRNA to abnormally high levels, indicating that our approach can yield interesting mutant ribosomes.

Independent in vitro assembly of all three major morphological parts of the 30S ribosomal subunit of Thermus thermophilus

Fragments of the 16S rRNA of Thermus thermophilus representing the 3' domain (nucleotides 890-1515) and the 5' domain (nucleotides 1-539) have been prepared by transcription in vitro. Incubation of these fragments with total 30S ribosomal proteins of T. thermophilus resulted in formation of specific RNPs. The particle assembled on the 3' RNA domain contained seven proteins corresponding to Escherichia coli ribosomal proteins S3, S7, S9, S10, S13, S14, and S19. All of them have previously been shown to interact with the 3' domain of the 16S RNA and to be localized in the head of the 30S ribosomal subunit. The particle formed on the 5' RNA domain contained five ribosomal proteins corresponding to E. coli proteins S4, S12, S17, S16, and S20. These proteins are known to be localized in the main part of the body of the 30S subunit. Both types of particle were compact and had sedimentation coefficients of 15.5 S and 13 S, respectively. Together with our recent demonstration of the reconstitution of the RNA particle representing the platform of the T. thermophilus 30S ribosomal subunit [Agalarov, S.C., Zheleznyakova, E.N., Selivanova, O.M., Zheleznaya, L.A., Matvienko, N.I., Vasiliev, V.D. & Spirin, A.S. (1998) Proc. Natl Acad. Sci. USA 95, 999-1003], these experiments establish that all three main structural lobes of the small ribosomal subunit can be reconstituted independently of each other and prepared in the individual state.

Translational enhancement by an element downstream of the initiation codon in Escherichia coli

The translation initiation of Escherichia coli mRNAs is known to be facilitated by a cis element upstream of the initiation codon, called the Shine-Dalgarno (SD) sequence. This sequence complementary to the 3' end of 16 S rRNA enhances the formation of the translation initiation complex of the 30 S ribosomal subunit with mRNAs. It has been debated that a cis element called the downstream box downstream of the initiation codon, in addition to the SD sequence, facilitates formation of the translation initiation complex; however, conclusive evidence remains elusive. Here, we show evidence that the downstream box plays a major role in the enhancement of translation initiation in concert with SD.

In vitro assembly of a ribonucleoprotein particle corresponding to the platform domain of the 30S ribosomal subunit

A fragment of the 16S RNA of Thermus thermophilus corresponding to the central domain (nucleotides 547-895) has been prepared by transcription in vitro. Incubation of this fragment with the total 30S ribosomal proteins has resulted in the formation of a compact 12S ribonucleoprotein particle. This particle contained five T. thermophilus proteins corresponding to Escherichia coli ribosomal proteins S6, S8, S11, S15, and possibly S18, all of which were previously shown to interact with the central domain of the 16S RNA and to be localized in the platform (side bulge) of the 30S ribosomal subunit. When examined by electron microscopy, isolated particles have an appearance that is similar in size and shape to the corresponding morphological features of the 30S subunit. We conclude that the central domain of the 16S RNA can independently and specifically assemble with a defined subset of ribosomal proteins into a compact ribonucleoprotein particle corresponding to the platform (side bulge) of the 30S subunit.

A novel ribosome-associated protein is important for efficient translation in Escherichia coli

Previously, we showed that strains which have been deleted for the 21K gene (hereafter called yfjA), of the trmD operon, encoding a 21-kDa protein (21K protein) have an approximately fivefold-reduced growth rate in rich medium. Here we show that such mutants show an up to sevenfold reduced growth rate in minimal medium, a twofold-lower cell yield-to-carbon source concentration ratio, and a reduced polypeptide chain growth rate of beta-galactosidase. Suppressor mutations that increased the growth rate and translational efficiency of a delta yfjA mutant were localized to the 3' part of rpsM, encoding ribosomal protein S13. The 21K protein was shown to have affinity for free 30S ribosomal subunits but not for 70S ribosomes. Further, the 21K protein seems to contain a KH domain and a KOW motif, both suggested to be involved in binding of RNA. These findings suggest that the 21K protein is essential for a proper function of the ribosome and is involved in the maturation of the ribosomal 30S subunits or in translation initiation.

Context dependent RNA-RNA recognition in a three-dimensional model of the 16S rRNA core

A 3-D model of the core of the 16S rRNA of Escherichia coli containing 328 residues has been built in the protein map derived from neutron scattering data with the help of all the available phylogenetic, biochemical, and cross-linking data. The three pseudoknots of the 16S-core cluster, through the arrangement of complex three-, four- and five-way junctions, around the neck and at the subunit interface. The roles in assembly, initiation or elongation of the three pseudoknots in ribosomal dynamics are emphasized. The 530-loop, localized on the periphery of the 30S particle, could be built with and without a pseudoknot independently of the state of the particle. The pseudoknot of the central domain controls the dynamics of an helix connected to the subunit interface which could trigger some mechanism during translation. The process of the model construction is compatible with a folding scenario in which the 5'-terminal pseudoknot controls the assembly of the central junction and the subsequent folding of the 3'-major domain. The modelling, together with the phylogenetic analysis and the experimental data, point to several potential RNA-RNA contacts which depend on the structural and sequence context in which they occur.

Independent in vitro assembly of a ribonucleoprotein particle containing the 3' domain of 16S rRNA

Small (30S) subunits of Escherichia coli ribosomes are composed of 21 proteins and a 1542-nucleotide 16S rRNA, whose secondary structure is divided into three domains. An in vitro transcript of the 3' domain of 16S rRNA (residues 923-1542), assembles efficiently with 30S ribosomal proteins to form a compact ribonucleoprotein (RNP) particle. Isolated particles examined under the electron microscope have a globular appearance, similar in size and shape to the head of the 30S ribosomal subunit. Two-dimensional gel analysis of the particles indicates the presence of proteins S3, S7, S9, S10, S13, S14, and S19 and smaller amounts of S2, all of which have been localized to the head of the 30S subunit by immunoelectron microscopy and neutron diffraction and belong to the S7 assembly family. Interestingly, protein S4, which is believed to interact exclusively with the 5' domain, is also reproducibly found associated with the particles in significant amounts. Chemical probing of the RNA in the assembled particle reveals characteristic cleavage protection patterns, showing that the proteins assemble with the 3'-domain RNA similarly to the way in which they assemble with 16S rRNA, although some of the later steps of assembly appear to be incomplete. These results show that the 3' domain of 16S rRNA can indeed assemble independently of the rest of the 30S subunit into a particle that resembles its structure in the ribosome. In addition, the assembled particles are able to bind spectinomycin with an affinity comparable to that of 30S subunits.

Antisuppression by a mutation in rpsM(S13) giving a shortened ribosomal protein S13

The phenotype associated with an rpsM(S13) mutation, originally isolated in Escherichia coli in a selection for pseudoreversion of streptomycin dependence, was studied in strains lacking the original mutations for antibiotic dependence. The rpsM mutation gives a decreased translational step time and a reduced growth rate. It functions as a strong antisuppressor to both the serU(Su1) amber suppressor and the trpT(Su9) opal suppressor, whereas the tyrT(Su3) amber suppressor is much less affected. The small ribosomal subunit from the rpsM mutant shows a reduced sedimentation coefficient but is able to form apparently normal 70S ribosomes as judged by ultracentrifugational analysis. Cloning and sequencing show that the rpsM mutation is a CAG to TAG alteration at codon position 100, giving an S13 protein which is shortened by 19 amino acids at its C-terminal end. This implies that the C-terminal domain of the protein that is involved in binding to 16S ribosomal RNA should be affected.

Zinc finger-like motifs in rat ribosomal proteins S27 and S29

The primary structures of the rat 40S ribosomal subunit proteins S27 and S29 were deduced from the sequences of nucleotides in recombinant cDNAs and confirmed by determination of amino acid sequences in the proteins. Ribosomal protein S27 has 83 amino acids and the molecular weight is 9,339. Hybridization of cDNA to digests of nuclear DNA suggests that there are 4-6 copies of the S27 gene; the mRNA for the protein is about 620 nucleotides in length. Ribosomal protein S29 has 55 amino acids and the molecular weight is 6,541. There are 14-17 copies of the S29 gene and its mRNA is about 500 nucleotides in length. Rat ribosomal protein S29 is related to several members of the archaebacterial and eubacterial S14 family of ribosomal proteins. S27 and S29 have zinc finger-like motifs as do other proteins from eukaryotic, archaebacterial, eubacterial, and mitochondrial ribosomes. Moreover, ribosomes and ribosomal subunits appear to contain zinc and iron as well.

In vivo chemical footprinting of the Escherichia coli ribosome

We have studied the in vivo chemical accessibility of 16S rRNA residues A349-G1505 in the small subunit of the Escherichia coli ribosome. Exponentially growing E. coli cultures were reacted with dimethyl sulfate, and the reactive sites on the 16S ribosomal RNA were analyzed by reverse transcription, an assay which detects reactions at N1-A and N3-C. In agreement with previous in vitro results, three regions of 16S RNA appeared particularly reactive to dimethyl sulfate: hairpin 27 (residues A892-A915) of the central domain, and hairpin 33-33A (residues A994-C1037) and the tip of hairpin 41 (residues A1256-A1275), both from the 3' major domain. These three regions contained 52% of the reactive residues but only 8% of the residues scanned. In contrast to previous in vitro results, three small sections of 16S RNA appeared protected: the tip of hairpins 26 (residue A845) and 31 (residues A968-A969), and residues A1418, A1441, and A1483 of the middle body of hairpin 44. Four of the dimethyl sulfate reactive sites (A831, C948, A1019, and C1192) are located in positions usually assumed to be double-stranded (helices 26, 30, 33-33A, and 34), which suggests alternative structures for these helices at least during part of the translation process, as if the residues in question belonged to "conformational switches." The addition of chloramphenicol protected residues A831, A1035-A1036, and A1503, which suggests that they belong to the mobile regions of the elongating ribosome, and become exposed during some transition(s) from one ribosomal state to the other during the elongation cycle.

Translation of the prophage lambda cl transcript

Mutations in rpsB that reduce the levels of the ribosomal protein S2 enhance the translation of cl in lambda lysogens. Two features of the cl transcript are required for enhanced translation: the absence of a leader and the presence of a downstream box, a sequence within the cl coding region that is complementary to the 16S rRNA. 30S ribosomal subunits deficient in S2 form ternary complexes with the cl transcript more efficiently than wild-type subunits. The absence of S2 may change the structure of the 16S rRNA, improving contacts with the cl downstream box.

A paradigm for local conformational control of function in the ribosome: binding of ribosomal protein S19 to Escherichia coli 16S rRNA in the presence of S7 is required for methylation of m2G966 and blocks methylation of m5C967 by their respective methyltransferases

We have partially purified two 16S rRNA-specific methyltransferases, one of which forms m2G966 (m2G MT), while the other one makes m5C967 (m5C MT). The m2G MT uses unmethylated 30S subunits as a substrate, but not free unmethylated 16S rRNA, while the m5C MT functions reciprocally, using free rRNA but not 30S subunits (Nègre, D., Weitzmann, C. and Ofengand, J. (1990) UCLA Symposium: Nucleic Acid Methylation (Alan Liss, New York), pp. 1-17). We have now determined the basis for this unusual inverse specificity at adjacent nucleotides. Binding of ribosomal proteins S7, S9, and S19 to unmodified 16S rRNA individually and in all possible combinations showed that S7 plus S19 were sufficient to block methylation by the m5C MT, while simultaneously inducing methylation by the m2G MT. A purified complex containing stoichiometric amounts of proteins S7, S9, and S19 bound to 16S rRNA was isolated and shown to possess the same methylation properties as 30S subunits, that is, the ability to be methylated by the m2G MT but not by the m5C MT. Since binding of S19 requires prior binding of S7, which had no effect on methylation when bound alone, we attribute the switch in methylase specificity solely to the presence of RNA-bound S19. Single-omission reconstitution of 30S subunits deficient in S19 resulted in particles that could not be efficiently methylated by either enzyme. Thus while binding of S19 is both necessary and sufficient to convert 16S rRNA into a substrate of the m2G MT, binding of either S19 alone or some other protein or combination of proteins to the 16S rRNA can abolish activity of the m5C MT. Binding of S19 to 16S rRNA is known to cause local conformational changes in the 960-975 stem-loop structure surrounding the two methylated nucleotides (Powers, T., Changchien, L.-M., Craven, G. and Noller, H.F. (1988) J. Mol. Biol. 200, 309-319). Our results show that the two ribosomal RNA MTs studied in this work are exquisitely sensitive to this small but nevertheless functionally important structural change.

Assembly of the Escherichia coli 30S ribosomal subunit reveals protein-dependent folding of the 16S rRNA domains

Protein-nucleic acid interactions involved in the assembly process of the Escherichia coli 30S ribosomal subunit were quantitatively analyzed by high-resolution scanning transmission electron microscopy. The in vitro reconstituted ribonucleoprotein (core) particles were characterized by their morphology, mass, and radii of gyration. During the assembly of the 30S subunit, the 16S rRNA underwent significant conformational changes that were governed by the cooperative interactions of the ribosomal proteins. The sequential association of the first 12 proteins with the 16S rRNA resulted in the formation of core particles containing up to three mass centers at distinct stages of the assembly process. These globular mass centers may correspond to the three major domains (5', central, and 3') of the 16S rRNA. Through the subsequent interactions of the late assembly proteins with the 16S rRNA, two of the three domains merge, yielding the basic structural traits of the native 30S subunit. The fine morphological features of the native 30S subunit became distinctly resolved only after the addition of the full complement of proteins. The fully reconstituted 30S subunits are active in polyphenylalanine synthesis assays. Visualization of the assembly mechanism of the E. coli 30S ribosomal subunit revealed domain-specific folding of the 16S rRNA through the formation of distinct intermediate core particles hitherto not observed.

Topography of the Escherichia coli ribosomal 30S subunit-initiation factor 2 complex

The specific effect of the binding of initiation factor IF2 on E coli 16S rRNA within the [IF2/30S/GTP] complex has been probed by crosslinking experiment with trans-diamminedichloro platinum (II) and by phosphate alkylation with ethylnitrosourea. Several 16S rRNA fragments crosslinked to IF2 have been identified and are mostly located in the head and the lateral protrusion of the 30S subunit. The study of the effect of IF2 binding to the 30S subunit reveals that the factor does not tightly bind to the 16S rRNA and induces both isolated reductions and enhancements of phosphate reactivity in the 16S rRNA. Several of them are located near the binding site of IF2 and weak effects are observed in distant parts of the subunit. These results are discussed in the light of current knowledge of the topographical localization of IF2 with the 30S subunit and of its relation with function.

The protein composition of reconstituted 30S ribosomal subunits: the effects of single protein omission

Using reverse phase HPLC, we have been able to quantify the protein compositions of reconstituted 30S ribosomal subunits, formed either with the full complement of 30S proteins in the reconstitution mix or with a single protein omitted. We denote particles formed in the latter case as SPORE (single protein omission reconstitution) particles. An important goal in 30S reconstitution studies is the formation of reconstituted subunits having uniform protein composition, preferably corresponding to one copy of each protein per reconstituted particle. Here we describe procedures involving variation of the protein:rRNA ratio that approach this goal. In SPORE particles the omission of one protein often results in the partial loss in uptake of other proteins. We also describe procedures to increase the uptake of such proteins into SPORE particles, thus enhancing the utility of the SPORE approach in defining the role of specific proteins in 30S structure and function. The losses of proteins other than the omitted protein provide a measure of protein:protein interaction within the 30S subunit. Most of these losses are predictable on the basis of other such measures. However, we do find evidence for several long-range protein:protein interactions (S6:S3, S6:S12, S10:S16, and S6:S4) that have not been described previously.

Single protein omission reconstitution studies of tetracycline binding to the 30S subunit of Escherichia coli ribosomes

In previous work we showed that on photolysis of Escherichia coli ribosomes in the presence of [3H]tetracycline (TC) the major protein labeled is S7, and we presented strong evidence that such labeling takes place from a high-affinity site related to the inhibitory action of TC [Goldman, R. A., Hasan, T., Hall, C. C., Strycharz, W. A., & Cooperman, B. S. (1983) Biochemistry 22, 359-368]. In this work we use single protein omission reconstitution (SPORE) experiments to identify those proteins that are important for high-affinity TC binding to the 30S subunit, as measured by both cosedimentation and filter binding assays. With respect to both sedimentation coefficients and relative Phe-tRNAPhe binding, the properties of the SPORE particles we obtain parallel very closely those measured earlier [Nomura, M., Mizushima, S., Ozaki, M., Traub, P., & Lowry, C. V. (1969) Cold Spring Harbor Symp. Quant. Biol. 34, 49-61], with the exception of the SPORE particle lacking S13. A total of five proteins, S3, S7, S8, S14, and S19, are shown to be important for TC binding, with the largest effects seen on omission of proteins S7 and S14. Determination of the protein compositions of the corresponding SPORE particles demonstrates that the observed effects are, for the most part, directly attributable to the omission of the given protein rather than reflecting an indirect effect of omitting one protein on the uptake of another. A large body of evidence supports the notion that four of these proteins, S3, S7, S14, and S19, are included, along with 16S rRNA bases 920-1396, in one of the major domains of the 30S subunit.

DNA-hybridization electron microscopy tertiary structure of 16 S rRNA

Seven regions of 16 S rRNA have been located on the surface of the 30 S ribosomal subunit by DNA-hybridization electron microscopy. This information has been incorporated into a model for the tertiary structure of 16 S rRNA, accounting for approximately 40% of the total 16 S rRNA. A structure labeled the platform ring is proposed for a region of rRNA within the central domain. This structure rings the edges of the platform and includes regions 655-751 and 769-810. Another region, the recognition complex, consists of nucleotides 500 to 545, and occupies a region on the exterior surface of the subunit near the elongation factor Tu binding site. Ribosomal proteins that have been mapped by immunoelectron microscopy are superimposed onto the model in order to examine possible regions of interaction. Good correlation between the model locations of ribosomal proteins, and regions of rRNA protected by ribosomal proteins provide independent support for this model.

RNA-protein interactions in 30S ribosomal subunits: folding and function of 16S rRNA

Chemical probing methods have been used to "footprint" 16S ribosomal RNA (rRNA) at each step during the in vitro assembly of twenty 30S subunit ribosomal proteins. These experiments yield information about the location of each protein relative to the structure of 16S rRNA and provide the basis for derivation of a detailed model for the three-dimensional folding of 16S rRNA. Several lines of evidence suggest that protein-dependent conformational changes in 16S rRNA play an important part in the cooperativity of ribosome assembly and in fine-tuning of the conformation and dynamics of 16S rRNA in the 30S subunit.

Model for the three-dimensional folding of 16 S ribosomal RNA

We have derived a model for the three-dimensional folding of Escherichia coli 16 S ribosomal RNA, using interactive computer graphic methods. It is based on (1) the secondary structure derived from comparative sequence analysis, (2) the three-dimensional co-ordinates for the centers of mass of the 30 S subunit proteins, and (3) the locations of sites in 16 S rRNA that interact with specific ribosomal proteins, from footprinting and crosslinking studies. We present a detailed description of the derivation of the model. About 75% of the RNA chain is sufficiently constrained to provide a useful model. This contains most of the universally conserved core of the molecule. In all but a few instances, protected and crosslinked sites can be placed within or very close to their cognate proteins, while obeying stereochemical rules. The overall shape of the model and locations of specific regions of the RNA correspond well to data derived from electron micrographs of 30 S subunits, although such data were not used to construct the model. Phylogenetic variations in the structure are readily accommodated; as an example, we have modeled the 950-nucleotide mammalian mitochondrial 12 S rRNA by superimposing it on the E. coli structure. The three major RNA domains, as defined by secondary structure, appear to exist as autonomous structural units in three dimensions, for the most part. There is an extensive interface between the 5' and central domains, whereas the 3' major domain has relatively little apparent contact with the rest of the structure. The 5', central and 3' major domains form structures that resemble the body, platform and head, respectively, seen in electron micrographs of 30 S subunits. We discuss possible roles for the ribosomal proteins in stabilizing specific structural features of the RNA during ribosome assembly. The decoding site, as deduced from footprinting and crosslinking studies involving the tRNA anticodon stem-loop, is well-localized. Bases protected from chemical probing by the anticodon stem-loop line the cleft of the subunit. The conserved loop at position 530, which contains some of the bases protected by A site-bound tRNA, is remote (approx. 80 A) from the decoding site. Protection of these bases by the anticodon stem-loop is thus unlikely to be due to direct contact.