Three-dimensional structure of the high-potential iron-sulfur protein isolated from the purple phototrophic bacterium Rhodocyclus tenuis determined and refined at 1.5 A resolution

Electrochemical and structural characterization of recombinant respiratory proteins of the acidophilic iron oxidizer Ferrovum sp. PN-J47-F6 suggests adaptations to the acidic pH at protein level

The tendency of the periplasmic redox proteins in acidophiles to have more positive redox potentials (Em) than their homologous counterparts in neutrophiles suggests an adaptation to acidic pH at protein level, since thermodynamics of electron transfer processes are also affected by acidic pH. Since this conclusion is mainly based on the electrochemical characterization of redox proteins from extreme acidophiles of the genus Acidithiobacillus, we aimed to characterize three recombinant redox proteins of the more moderate acidophile Ferrovum sp. PN-J47-F6. We applied protein film voltammetry and linear sweep voltammetry coupled to UV/Vis spectroscopy to characterize the redox behavior of HiPIP-41, CytC-18, and CytC-78, respectively. The Em-values of HiPIP-41 (571 ± 16 mV), CytC-18 (276 ± 8 mV, 416 ± 2 mV), and CytC-78 (308 ± 7 mV, 399 ± 7 mV) were indeed more positive than those of homologous redox proteins in neutrophiles. Moreover, our findings suggest that the adaptation of redox proteins with respect to their Em occurs more gradually in response to the pH, since there are also differences between moderate and more extreme acidophiles. In order to address structure function correlations in these redox proteins with respect to structural features affecting the Em, we conducted a comparative structural analysis of the Ferrovum-derived redox proteins and homologs of Acidithiobacillus spp. and neutrophilic proteobacteria. Hydrophobic contacts in the redox cofactor binding pockets resulting in a low solvent accessibility appear to be the major factor contributing to the more positive Em-values in acidophile-derived redox proteins. While additional cysteines in HiPIPs of acidophiles might increase the effective shielding of the [4Fe-4S]-cofactor, the tight shielding of the heme centers in acidophile-derived cytochromes is achieved by a drastic increase in hydrophobic contacts (A.f. Cyc41), and by a larger fraction of aromatic residues in the binding pockets (CytC-18, CytC-78).

Shedding light on the electron transfer chain of a moderately acidophilic iron oxidizer: characterization of recombinant HiPIP-41, CytC-18 and CytC-78 derived from Ferrovum sp. PN-J47-F6

Efficient electron transfer from the donor to the acceptor couple presents a necessary requirement for acidophilic and neutrophilic iron oxidizers due to the low energy yield of aerobic ferrous iron oxidation. Involved periplasmic electron carriers are very diverse in these bacteria and show adaptations to the respective thermodynamic constraints such as a more positive redox potential reported for extreme acidophilic Acidithiobacillus spp. Respiratory chain candidates of moderately acidophilic members of the genus Ferrovum share similarities with both their neutrophilic iron oxidizing relatives and the more distantly related Acidithiobacillus spp. We examined our previous omics-based conclusions on the potential electron transfer chain in Ferrovum spp. by characterizing the three redox protein candidates CytC-18, CytC-78 and HiPIP-41 of strain PN-J47-F6 which were produced as recombinant proteins in Eschericha coli. UV/Vis-based redox assays suggested that HiPIP-41 has a very positive redox potential while redox potentials of CytC-18 and CytC-78 are more negative than their counterparts in Acidithiobacillus spp. Far Western dot blotting demonstrated interactions between all three recombinant redox proteins while redox assays showed the electron transfer from HiPIP-41 to either of the cytochromes. Altogether, CytC-18, CytC-78 and HiPIP-41 indeed represent very likely candidates of the electron transfer in Ferrovum sp. PN-J4-F6.

PRE-driven protein NMR structures: an alternative approach in highly paramagnetic systems

Metalloproteins play key roles across biology, and knowledge of their structure is essential to understand their physiological role. For those metalloproteins containing paramagnetic states, the enhanced relaxation caused by the unpaired electrons often makes signal detection unfeasible near the metal center, precluding adequate structural characterization right where it is more biochemically relevant. Here, we report a protein structure determination by NMR where two different sets of restraints, one containing Nuclear Overhauser Enhancements (NOEs) and another containing Paramagnetic Relaxation Enhancements (PREs), are used separately and eventually together. The protein PioC from Rhodopseudomonas palustris TIE-1 is a High Potential Iron-Sulfur Protein (HiPIP) where the [4Fe-4S] cluster is paramagnetic in both oxidation states at room temperature providing the source of PREs used as alternative distance restraints. Comparison of the family of structures obtained using NOEs only, PREs only, and the combination of both reveals that the pairwise root-mean-square deviation (RMSD) between them is similar and comparable with the precision within each family. This demonstrates that, under favorable conditions in terms of protein size and paramagnetic effects, PREs can efficiently complement and eventually replace NOEs for the structural characterization of small paramagnetic metalloproteins and de novo-designed metalloproteins by NMR. DATABASES: The 20 conformers with the lowest target function constituting the final family obtained using the full set of NMR restraints were deposited to the Protein Data Bank (PDB ID: 6XYV). The 20 conformers with the lowest target function obtained using NOEs only (PDB ID: 7A58) and PREs only (PDB ID: 7A4L) were also deposited to the Protein Data Bank. The chemical shift assignments were deposited to the BMRB (code 34487).

Comparative differential cuproproteomes of Rhodobacter capsulatus reveal novel copper homeostasis related proteins

Copper (Cu) is an essential, but toxic, micronutrient for living organisms and cells have developed sophisticated response mechanisms towards both the lack and the excess of Cu in their environments. In this study, we achieved a global view of Cu-responsive changes in the prokaryotic model organism Rhodobacter capsulatus using label-free quantitative differential proteomics. Semi-aerobically grown cells under heterotrophic conditions in minimal medium (∼0.3 μM Cu) were compared with cells supplemented with either 5 μM Cu or with 5 mM of the Cu-chelator bathocuproine sulfonate. Mass spectrometry based bottom-up proteomics of unfractionated cell lysates identified 2430 of the 3632 putative proteins encoded by the genome, producing a robust proteome dataset for R. capsulatus. Use of biological and technical replicates for each growth condition yielded high reproducibility and reliable quantification for 1926 of the identified proteins. Comparison of cells grown under Cu-excess or Cu-depleted conditions to those grown under minimal Cu-sufficient conditions revealed that 75 proteins exhibited statistically significant (p < 0.05) abundance changes, ranging from 2- to 300-fold. A subset of the highly Cu-responsive proteins was orthogonally probed using molecular genetics, validating that several of them were indeed involved in cellular Cu homeostasis.

Crystallographic characterization of the high-potential iron-sulfur protein in the oxidized state at 0.8 Å resolution

High-potential iron-sulfur protein (HiPIP) is a soluble electron carrier protein of photosynthetic bacteria with an Fe₄S₄ cluster. Although structural changes accompanying the electron transfer are important for understanding of the functional mechanism, the changes have not been clarified in sufficient detail. We previously reported the high-resolution crystal structures of HiPIP from a thermophilic purple bacterium Thermochromatium tepidum in the reduced state. In order to perform a detailed comparison between the structures in different redox states, the oxidized structure should also be revealed at high resolution. Therefore, in the present study we performed a crystallographic analysis of oxidized HiPIP and a structural comparison with the reduced form at a high resolution of 0.8 Å. The comparison highlighted small but significant contraction in the iron-sulfur cluster. The changes in Fe-S bond lengths were similar to that predicted by theoretical calculation, although some discrepancies were also found. Almost distances between the sulfur atoms of the iron-sulfur cluster and the protein environment are elongated upon the oxidation. Positional changes of hydrogen atoms in the protein environment, such as on the amide-hydrogen of Cys75 in the proximity of the iron-sulfur cluster, were also observed in the accurate analyses. None of the water molecules exhibited significant changes in position or anisotropy of atomic displacement parameter between the two states, while the orientations of some water molecules were different.

Structures of benzylsuccinate synthase elucidate roles of accessory subunits in glycyl radical enzyme activation and activity

Anaerobic degradation of the environmental pollutant toluene is initiated by the glycyl radical enzyme benzylsuccinate synthase (BSS), which catalyzes the radical addition of toluene to fumarate, forming benzylsuccinate. We have determined crystal structures of the catalytic α-subunit of BSS with its accessory subunits β and γ, which both bind a [4Fe-4S] cluster and are essential for BSS activity in vivo. We find that BSSα has the common glycyl radical enzyme fold, a 10-stranded β/α-barrel that surrounds the glycyl radical cofactor and active site. Both accessory subunits β and γ display folds related to high potential iron-sulfur proteins but differ substantially from each other in how they interact with the α-subunit. BSSγ binds distally to the active site, burying a hydrophobic region of BSSα, whereas BSSβ binds to a hydrophilic surface of BSSα that is proximal to the active site. To further investigate the function of BSSβ, we determined the structure of a BSSαγ complex. Remarkably, we find that the barrel partially opens, allowing the C-terminal region of BSSα that houses the glycyl radical to shift within the barrel toward an exit pathway. The structural changes that we observe in the BSSαγ complex center around the crucial glycyl radical domain, thus suggesting a role for BSSβ in modulating the conformational dynamics required for enzyme activity. Accompanying proteolysis experiments support these structural observations.

A convenient route to synthetic analogues of the oxidized form of high-potential iron-sulfur proteins

An amide-bound [Fe4S4](3+) cluster, [Fe4S4{N(SiMe3)2}4](-) (1), was found to serve as a convenient precursor for synthetic analogues of the oxidized form of high-potential iron-sulfur proteins. Treatment of 1 with 4 equiv of bulky thiols led to replacement of the amide ligands with thiolates, giving rise to a series of [Fe4S4(SR)4](-) clusters (R = Dmp (2a), Tbt (2b), Eind (2c), Dxp (2d), Dpp (2e); Dmp = 2,6-di(mesityl)phenyl, Tbt = 2,4,6-tris[bis(trimethylsilyl)methyl]phenyl, Eind = 1,1,3,3,5,5,7,7-octaethyl-s-hydrindacen-4-yl, Dxp = 2,6-di(m-xylyl)phenyl, Dpp = 2,6-diphenylphenyl). These clusters were characterized by the mass spectrum, the EPR spectrum, and X-ray crystallography. The redox potentials of the [Fe4S4](3+/2+) couple, -0.82 V (2a), -0.86 V (2b), -0.84 V (2c), -0.74 V (2d), and -0.63 V (2e) vs Ag/Ag(+) in THF, are significantly more negative than that of [Fe4S4(SPh)4](-/2-) (-0.21 V).

Identifying sequence determinants of reduction potentials of metalloproteins

The reduction potential of an electron transfer protein is one of its most important functional characteristics. Although the type of redox site and the protein fold are the major determinants of the reduction potential of a redox-active protein, its amino acid sequence may tune the reduction potential as well. Thus, homologous proteins can often be divided into different classes, with each class characterized by a biological function and a reduction potential. Site-specific mutagenesis of the sequence determinants of the differences in the reduction potential between classes should change the reduction potential of a protein in one class to that of the other class. Here, a procedure is presented that combines energetic and bioinformatic analysis of homologous proteins to identify sequence determinants that are also good candidates for site-specific mutations, using the [4Fe-4S] ferredoxins and the [4Fe-4S] high-potential iron-sulfur proteins as examples. This procedure is designed to guide site-specific mutations or more computationally expensive studies, such as molecular dynamics simulations. To make the procedure more accessible to the general scientific community, it is being implemented into CHARMMing, a Web-based portal, with a library of density functional theory results for the redox site that are used in the setting up of Poisson-Boltzmann continuum electrostatics calculations for the protein energetics.

Calculating standard reduction potentials of [4Fe-4S] proteins

The oxidation-reduction potentials of electron transfer proteins determine the driving forces for their electron transfer reactions. Although the type of redox site determines the intrinsic energy required to add or remove an electron, the electrostatic interaction energy between the redox site and its surrounding environment can greatly shift the redox potentials. Here, a method for calculating the reduction potential versus the standard hydrogen electrode, E°, of a metalloprotein using a combination of density functional theory and continuum electrostatics is presented. This work focuses on the methodology for the continuum electrostatics calculations, including various factors that may affect the accuracy. The calculations are demonstrated using crystal structures of six homologous HiPIPs, which give E° that are in excellent agreement with experimental results.

Characterizing the effects of the protein environment on the reduction potentials of metalloproteins

The reduction potentials of electron transfer proteins are critically determined by the degree of burial of the redox site within the protein and the degree of permanent polarization of the polypeptide around the redox site. Although continuum electrostatics calculations of protein structures can predict the net effect of these factors, quantifying each individual contribution is a difficult task. Here, the burial of the redox site is characterized by a dielectric radius R(p) (a Born-type radius for the protein), the polarization of the polypeptide is characterized by an electret potential ϕ(p) (the average electrostatic potential at the metal atoms), and an electret-dielectric spheres (EDS) model of the entire protein is then defined in terms of R(p) and ϕ(p). The EDS model shows that for a protein with a redox site of charge Q, the dielectric response free energy is a function of Q(2), while the electret energy is a function of Q. In addition, R(p) and ϕ(p) are shown to be characteristics of the fold of a protein and are predictive of the most likely redox couple for redox sites that undergo different redox couples.

Fold versus sequence effects on the driving force for protein-mediated electron transfer

Electron transport chains composed of electron transfer reactions mainly between proteins provide fast efficient flow of energy in a variety of metabolic pathways. Reduction potentials are essential characteristics of the proteins because they determine the driving forces for the electron transfers. As both polar and charged groups from the backbone and side chains define the electrostatic environment, both the fold and the sequence will contribute. However, although the role of a specific sequence may be determined by experimental mutagenesis studies of reduction potentials, understanding the role of the fold by experiment is much more difficult. Here, continuum electrostatics and density functional theory calculations are used to analyze reduction potentials in [4Fe-4S] proteins. A key feature is that multiple homologous proteins in three different folds are compared: six high potential iron-sulfur proteins, four bacterial ferredoxins, and four nitrogenase iron proteins. Calculated absolute reduction potentials are shown to be in quantitative agreement with electrochemical reduction potentials. Calculations further demonstrate that the contribution of the backbone is larger than that of the side chains and is consistent for homologous proteins but differs for nonhomologous proteins, indicating that the fold is the major protein factor determining the reduction potential, whereas the specific amino acid sequence tunes the reduction potential for a given fold. Moreover, the fold contribution is determined mainly by the proximity of the redox site to the protein surface and the orientation of the dipoles of backbone near the redox site.

Influence of NH-Sgamma bonding interactions on the structure and dynamics of metallothioneins

Mammalian metallothioneins ([Formula: see text]) show a clustered arrangement of the metal ions and a nonregular protein structure. The solution structures of Cd(3)-thiolate cluster containing beta-domain of mouse beta-MT-1 and rat beta-MT-2 show high structural similarities, but widely differing structure dynamics. Molecular dynamics simulations revealed a substantially increased number of NH-Sgamma hydrogen bonds in beta-MT-2, features likely responsible for the increased stability of the Cd(3)-thiolate cluster and the enfolding protein domain. Alterations in the NH-Sgamma hydrogen-bonding network may provide a rationale for the differences in dynamic properties encountered in the beta-domains of MT-1, -2, and -3 isoforms, believed to be essential for their different biological function.

Expression, purification and molecular modelling of the Iro protein from Acidithiobacillus ferrooxidans Fe-1

The Iro protein was proposed to be involved in the iron respiratory electron transport chain in Acidithiobacillus ferrooxidans, it is a member of HiPIP family with the iron-sulfur cluster for electron transfer. The gene of Iro protein from A. ferrooxidans Fe-1 was cloned and then successfully expressed in Escherichia coli, finally purified by one-step affinity chromatography to homogeneity. The recombinant protein was observed to be dimer. The molecular mass of a monomer containing the [Fe4S4] cluster was 6847.35 Da by MALDI-TOF-MS. The optical and EPR spectra results of the recombinant protein confirmed that the iron-sulfur cluster was correctly inserted into the active site of the protein. Molecular modelling for the protein revealed that Cys20, Cys23, Cys32 and Cys45 were in ligation with the iron-sulfur cluster, and Tyr10 was important for the stability of the [Fe4S4] cluster. As we know, this is the first report of expression in E. coli of the Iro protein from A. ferrooxidans Fe-1.

The Iron-Sulfur Clusters in Escherichia coli Succinate Dehydrogenase Direct Electron Flow

Succinate dehydrogenase is an indispensable enzyme involved in the Krebs cycle as well as energy coupling in the mitochondria and certain prokaryotes. During catalysis, succinate oxidation is coupled to ubiquinone reduction by an electron transfer relay comprising a flavin adenine dinucleotide cofactor, three iron-sulfur clusters, and possibly a heme b556. At the heart of the electron transport chain is a [4Fe-4S] cluster with a low midpoint potential that acts as an energy barrier against electron transfer. Hydrophobic residues around the [4Fe-4S] cluster were mutated to determine their effects on the midpoint potential of the cluster as well as electron transfer rates. SdhB-I150E and SdhB-I150H mutants lowered the midpoint potential of this cluster; surprisingly, the His variant had a lower midpoint potential than the Glu mutant. Mutation of SdhB-Leu-220 to Ser did not alter the redox behavior of the cluster but instead lowered the midpoint potential of the [3Fe-4S] cluster. To correlate the midpoint potential changes in these mutants to enzyme function, we monitored aerobic growth in succinate minimal medium, anaerobic growth in glycerol-fumarate minimal medium, non-physiological and physiological enzyme activities, and heme reduction. It was discovered that a decrease in midpoint potential of either the [4Fe-4S] cluster or the [3Fe-4S] cluster is accompanied by a decrease in the rate of enzyme turnover. We hypothesize that this occurs because the midpoint potentials of the [Fe-S] clusters in the native enzyme are poised such that direction of electron transfer from succinate to ubiquinone is favored.

Structural analysis of the HiPIP from the acidophilic bacteria: Acidithiobacillus ferrooxidans

Hip is a high-potential iron-sulfur protein (HiPIP) isolated from the acidophilic bacterium, Acidithiobacillus ferrooxidans. In the present work, a structural model of Hip suggests that the role of proline residues is essential to stabilize the protein folding at very low pH. The presence of an unusual disulfide bridge in Hip is demonstrated using mass spectrometry and nuclear magnetic resonance. This disulfide bridge is necessary to anchor the N-terminal extremity of the protein, but is not involved in the acid stability of Hip. The structural parameters correlated with the pH dependence of Hip redox potential are also analysed on the basis of this model. Given that the same structural features can enhance acidic stability and lead to elevated redox potentials, modulation of the redox potentials of electron carriers may be necessary to achieve electron transfer at very low pH.

Investigation of the Environment Surrounding Iron−Sulfur Cluster 4 of Escherichia coli Dimethylsulfoxide Reductase

Iron-sulfur ([Fe-S]) clusters are common in electron transfer proteins, and their midpoint potentials (E(m) values) play a major role in defining the rate at which electrons are shuttled. The E(m) values of [Fe-S] clusters are largely dependent on the protein environment as well as solvent accessibility. The electron transfer subunit (DmsB) of Escherichia coli dimethylsulfoxide reductase contains four [4Fe-4S] clusters (FS1-FS4) with E(m) values between -50 and -330 mV. We have constructed an in silico model of DmsB and addressed the roles of a group of residues surrounding FS4 in electron transfer, menaquinol (MQH(2)) binding, and protein control of its E(m). Residues Pro80, Ser81, Cys102, and Tyr104 of DmsB are located at the DmsB-DmsC interface and are critical for the binding of the MQH(2) inhibitor analogue 2-n-heptyl-4-hydroxyquinoline N-oxide (HOQNO) and the transfer of electrons from MQH(2) to FS4. Because the EPR spectrum of FS4 is complicated by spectral overlap and spin-spin interactions with the other [4Fe-4S] clusters of DmsB, we evaluated mutant effects on FS4 in double mutants (with a DmsB-C102S mutation) in which FS4 is assembled as a [3Fe-4S] cluster (FS4([3Fe)(-)(4S])). The DmsB-C102S/Y104D and DmsB-C102S/Y104E mutants dramatically lower the E(m) of FS4([3Fe)(-)(4S]) from 275 to 150 mV and from 275 to 145 mV, respectively. Mutations of positively charged residues around FS4([3Fe)(-)(4S]) lower its E(m), but mutations of negatively charged residues have negligible effects. The E(m) of FS4([3Fe)(-)(4S]) in the DmsB-C102S mutant is insensitive to HOQNO as well as to changes in pH from 5 to 7. The FS4([3Fe)(-)(4S]) E(m) of the DmsB-C102S/Y104D mutant increases in the presence of HOQNO and decreasing pH. Analyses of the mutants suggest that the maximum achievable E(m) for FS4([3Fe)(-)(4S]) of DmsB is approximately 275 mV.

Structural and functional studies on the tetraheme cytochrome subunit and its electron donor proteins: the possible docking mechanisms during the electron transfer reaction

The photosynthetic reaction centers (RCs) classified as the group II possess a peripheral cytochrome (Cyt) subunit, which serves as the electron mediator to the special-pair. In the cycle of the photosynthetic electron transfer reactions, the Cyt subunit accepts electrons from soluble electron carrier proteins, and re-reduces the photo-oxidized special-pair of the bacteriochlorophyll. Physiologically, high-potential cytochromes such as the cytochrome c2 and the high-potential iron-sulfur protein (HiPIP) function as the electron donors to the Cyt subunit. Most of the Cyt subunits possess four heme c groups, and it was unclear which heme group first accepts the electron from the electron donor. The most distal heme to the special-pair, the heme-1, has a lower redox potential than the electron donors, which makes it difficult to understand the electron transfer mechanism mediated by the Cyt subunit. Extensive mutagenesis combined with kinetic studies has made a great contribution to our understanding of the molecular interaction mechanisms, and has demonstrated the importance of the region close to the heme-1 in the electron transfer. Moreover, crystallographic studies have elucidated two high-resolution three-dimensional structures for the RCs containing the Cyt subunit, the Blastochloris viridis and Thermochromatium tepidum RCs, as well as the structures of their electron donors. An examination of the structural data also suggested that the binding sites for both the cytochrome c2 and the HiPIP are located adjacent to the solvent-accessible edge of the heme-1. In addition, it is also indicated by the structural and biochemical data that the cytochrome c2 and the HiPIP dock with the Cyt subunit by c2 is recognized through electrostatic interactions while hydrophobic interactions are important in the HiPIP docking.

Electron transfer from HiPIP to the photooxidized tetraheme cytochrome subunit of Allochromatium vinosum reaction center: new insights from site-directed mutagenesis and computational studies

The kinetics of electron transfer from reduced high-potential iron-sulfur protein (HiPIP) to the photooxidized tetraheme cytochrome c subunit (THC) bound to the photosynthetic reaction center (RC) from the purple sulfur bacterium Allochromatium vinosum were studied under controlled redox conditions by flash absorption spectroscopy. At ambient redox potential Eh = +200 mV, where only the high-potential (HP) hemes of the THC are reduced, the electron transfer from HiPIP to photooxidized HP heme(s) follows second-order kinetics with rate constant k = (4.2 +/- 0.2) 10(5) M(-1) s(-1) at low ionic strength. Upon increasing the ionic strength, k increases by a maximum factor of ca. 2 at 640 mM KCl. The role of Phe48, which lies on the external surface of HiPIP close to the [Fe4S4] cluster and presumably on the electron transfer pathway to cytochrome heme(s), was investigated by site-directed mutagenesis. Substitution of Phe48 with arginine, aspartate, and histidine completely prevents electron donation. Conversely, electron transfer is still observed upon substitution of Phe48 with tyrosine and tryptophan, although the rate is decreased by more than 1 order of magnitude. These results suggest that Phe48 is located on a key protein surface patch essential for efficient electron transfer, and that the presence of an aromatic hydrophobic residue on the putative electron-transfer pathway plays a critical role. This conclusion was supported by protein docking calculations, resulting in a structural model for the HiPIP-THC complex, which involves a docking site close to the LP heme farthest from the bacteriochlorophyll special pair.

HiPIP in Rubrivivax gelatinosus is firmly associated to the membrane in a conformation efficient for electron transfer towards the photosynthetic reaction centre

High potential iron-sulfur protein (HiPIP), a small soluble redox protein, has been shown to serve in vivo as electron donor to the photosynthetic reaction centre (RC) in Rubrivivax gelatinosus [Biochemistry 34 (1995) 11736]. The results of time-resolved optical spectroscopy on membrane-fragments from this organism indicates that the photooxidized RC is re-reduced by HiPIP even in the absence of the soluble fraction. This implies that a significant fraction of HiPIP can firmly bind to the membrane in a conformation able to interact with the RCs. Salt treatment of the membrane-fragments abolishes these re-reduction kinetics, demonstrating the presence of HiPIP on the membrane due to association with the RC rather than due to simple trapping in hypothetical chromatophores. The existence of such a functional complex in membranes is confirmed and its structure further examined by electron paramagnetic resonance (EPR) performed on membrane-fragments. Orientation-dependent EPR spectra of HiPIP were recorded on partially ordered membranes, oxidized either chemically or photochemically. Whereas hardly any preferential orientation of the HiPIP was seen in the chemically oxidised sample, a subpopulation of HiPIP showing specific orientations could be photooxidised. This fraction arises from the electron transfer complex between HiPIP and the RC.

Crystal structure and stability studies of C77S HiPIP: a serine ligated [4Fe-4S] cluster

The crystal structure of Chromatium vinosum C77S HiPIP has been determined and is compared with that of wild type. This is the first reported crystal structure of a Ser ligated [4Fe-4S] cluster and reveals a 0.11 A shortening of the Fe-O bond (relative to Fe-S), but only minor structural alterations of the overall tertiary structure. Coordination changes are corroborated by resonance Raman spectroscopy. Comparison of the crystal and solution structures for HiPIPs identifies Phe48 as the main controller of solvent access to the Fe-S cluster; however, there is no significant change in cluster solvation of the C77S mutant relative to WT HiPIP. Ser ligation ultimately results in decreased cluster stability due to increased sensitivity to proton mediated degradation.

A metallothionein containing a zinc finger within a four-metal cluster protects a bacterium from zinc toxicity

Zinc is essential for many cellular processes, including DNA synthesis, transcription, and translation, but excess can be toxic. A zinc-induced gene, smtA, is required for normal zinc-tolerance in the cyanobacterium Synechococcus PCC 7942. Here we report that the protein SmtA contains a cleft lined with Cys-sulfur and His-imidazole ligands that binds four zinc ions in a Zn(4)Cys(9)His(2) cluster. The thiolate sulfurs of five Cys ligands provide bridges between the two ZnCys(4) and two ZnCys(3)His sites, giving two fused six-membered rings with distorted boat conformations. The inorganic core strongly resembles the Zn(4)Cys(11) cluster of mammalian metallothionein, despite different amino acid sequences, a different linear order of the ligands, and presence of histidine ligands. Also, SmtA contains elements of secondary structure not found in metallothioneins. One of the two Cys(4)-coordinated zinc ions in SmtA readily exchanges with exogenous metal ((111)Cd), whereas the other is inert. The thiolate sulfur ligands bound to zinc in this site are buried within the protein. Regions of beta-strand and alpha-helix surround the inert site to form a zinc finger resembling the zinc fingers in GATA and LIM-domain proteins. Eukaryotic zinc fingers interact specifically with other proteins or DNA and an analogous interaction can therefore be anticipated for prokaryotic zinc fingers. SmtA now provides structural proof for the existence of zinc fingers in prokaryotes, and sequences related to the zinc finger motif can be identified in several bacterial genomes.

Crystal structures of photosynthetic reaction center and high-potential iron-sulfur protein from Thermochromatium tepidum: thermostability and electron transfer

The reaction center (RC) of photosynthetic bacteria is a membrane protein complex that promotes a light-induced charge separation during the primary process of photosynthesis. In the photosynthetic electron transfer chain, the soluble electron carrier proteins transport electrons to the RC and reduce the photo-oxidized special-pair of bacteriochlorophyll. The high-potential iron-sulfur protein (HiPIP) is known to serve as an electron donor to the RC in some species, where the c-type cytochrome subunit, the peripheral subunit of the RC, directly accepts electrons from the HiPIP. Here we report the crystal structures of the RC and the HiPIP from Thermochromatium (Tch.) tepidum, at 2.2-A and 1.5-A resolution, respectively. Tch. tepidum can grow at the highest temperature of all known purple bacteria, and the Tch. tepidum RC shows some degree of stability to high temperature. Comparison with the RCs of mesophiles, such as Blastochloris viridis, has shown that the Tch. tepidum RC possesses more Arg residues at the membrane surface, which might contribute to the stability of this membrane protein. The RC and the HiPIP both possess hydrophobic patches on their respective surfaces, and the HiPIP is expected to interact with the cytochrome subunit by hydrophobic interactions near the heme-1, the most distal heme to the special-pair.

Expression and characterization of recombinant Rhodocyclus tenuis high potential iron-sulfur protein

The high potential iron-sulfur protein (HiPIP) from Rhodocyclus tenuis strain 2761 has been overproduced in Escherichia coli from its structural gene, purified to apparent homogeneity, and then characterized by an array of methods. UV-visible spectra of the reduced and oxidized recombinant protein were similar to those of the native protein. EPR of the oxidized protein shows g values of 2. 11, 2.03, and 2.03. ESI-MS gave a mass difference of 350 Da between the holoprotein and acid-treated protein, consistent with incorporation of a [Fe(4)S(4)] cluster in the holoprotein. The observed mass of the apoprotein was 6296.6 Da compared to the expected average molecular mass of 6297.2 Da of the apoprotein. The reduction potential was determined using cyclic and square-wave voltammetry to be 321 and 314 mV versus NHE, respectively. All the observed properties of the recombinant protein parallel those of the native protein or those of native HiPIPs in general, indicating correct folding and incorporation of the iron-sulfur cluster.

Comparison of the binding sites for high-potential iron-sulfur protein and cytochrome c on the tetraheme cytochrome subunit bound to the bacterial photosynthetic reaction center

A tetraheme cytochrome subunit bound to the photosynthetic reaction center (RC) of purple bacterium, Rubrivivax gelatinosus, interacts with two types of soluble electron donors, cytochromes c and high-potential iron-sulfur protein (HiPIP), at a binding domain in the vicinity of low-potential heme 1, the fourth heme from the special pair of bacteriochlorophyll. To clarify the mechanism of the interaction, the domain around heme 1 was examined using site-directed mutants that changed the surface charge in the region within 20 A from the heme edge. In the case of the interaction with soluble cytochrome c, a strong dependence on the sign of the introduced charge was observed in all mutants: positive charge inhibited the reaction rate, whereas additional negative charge accelerated it. This confirmed the electrostatic nature of the binding. Interaction with HiPIP was inhibited by a limited number of mutations at the close vicinity of heme 1, and no acceleration was observed (the effects of some mutations were independent of the sign of the introduced charge). The acidic residues which were critically important for the binding of cytochrome c showed much less contribution to the binding of HiPIP. The binding site for HiPIP appears to be mostly formed by uncharged and hydrophobic residues, occupying a significantly smaller area than the cytochrome-c-binding site. It is proposed that the docking of HiPIP to the RC in Rvi. gelatinosus is primarily controlled by hydrophobic contacts between protein surfaces, thus differing from the electrostatic mode of the RC-cytochrome c interaction.

Amino acid sequences of two high-potential iron-sulfur proteins (HiPIPs) from the moderately halophilic purple phototrophic bacterium, Rhodospirillum salinarum

The amino acid sequences of two very different high-potential iron-sulfur protein (HiPIP) isozymes have been determined from the moderately halophilic purple phototrophic bacterium, Rhodospirillum salinarum. Iso-1 HiPIP, which is monomeric and contains 57 amino acid residues, is most similar to the Thiobacillus ferrooxidans iron-oxidizing enzyme (45% identity and a 6-residue deletion). On the other hand, iso-2 HiPIP, which is isolated as an oligomer, contains a peptide chain with 54 amino acid residues. It is the smallest reported to date and is only 31% identical to iso-1 HiPIP. A massive deletion of 17 residues is found at the N-terminus, such that only 2 residues remain prior to the first cysteine. Iso-2 HiPIP also has a 12-residue insertion and a 5-residue deletion. Prior to this study, there were only 2 absolutely conserved residues (Tyr 19 and Gly 75, Chromatium numbering) in addition to the 4 iron-sulfur cluster binding cysteine residues among the 13 HiPIPs sequenced to date. We found that Tyr 19 is absent in iso-2 HiPIP along with the entire N-terminal loop. Moreover, Gly 75 is substituted in both R. salinarum HiPIPs. These characteristics make the R. salinarum HiPIPs, and especially iso-2, the most divergent yet characterized.

The structure of iron-sulfur proteins

Ferredoxins are a group of iron-sulfur proteins for which a wealth of structural and mutational data have recently become available. Previously unknown structures of ferredoxins which are adapted to halophilic, acidophilic or hyperthermophilic environments and new cysteine patterns for cluster ligation and non-cysteine cluster ligation have been described. Site-directed mutagenesis experiments have given insight into factors that influence the geometry, stability, redox potential, electronic properties and electron-transfer reactivity of iron-sulfur clusters.

Crystal structure and possible dimerization of the high-potential iron-sulfur protein from Chromatium purpuratum

The crystal structure of the high-potential iron-sulfur protein (HiPIP) isolated from Chromatium purpuratum is reported at 2.7 A resolution. The three HiPIP molecules in the asymmetric unit of the crystals form one and one-half dimers. Two molecules are related by a noncrystallographic symmetry rotation of approximately 175 degrees with negligible translation along the dyad axis. The third molecule in the asymmetric unit also forms a dimer with a second HiPIP molecule across the crystallographic 2-fold symmetry axis. The Fe4S4 clusters in both the crystallographic and noncrystallographic dimers are separated by approximately 13.0 A. Solution studies give mixed results regarding the oligomeric state of the C. purpuratum HiPIP. A comparison with crystal structures of HiPIPs from other species shows that HiPIP tends to associate rather nonspecifically about a conserved, relatively hydrophobic surface patch to form dimers.

Structure of Azotobacter vinelandii 7Fe ferredoxin at 1.35 A resolution and determination of the [Fe-S] bonds with 0.01 A accuracy

The crystal structure of Azotobacter vinelandii ferredoxin I (FdI) at 100 K has been refined at 1.35 A resolution by full matrix block diagonal least-squares methods with anisotropic temperature factors for all non-hydrogen atoms and with hydrogen atoms included in the model. Fe-S bonds within the [3Fe-4S]+ and [4Fe-4S]2+ clusters of the protein are determined with an accuracy of at least 0.01 A. Analysis of metric parameters reveals greater variation in bonds and angles within the [3Fe-4S]+ cluster than in the [4Fe-4S]2+ cluster, whereas the opposite is true regarding the cysteine Sgamma atoms ligating to the two [Fe-S] cores. The [3Fe-4S]+ core is asymmetrically distorted by the protein matrix but relatively uniformly ligated by its three Cys ligands; in contrast the tetrahedral [4Fe-4S]2+ core is relatively symmetric but non-uniformily ligated by its four Cys ligands, three of which occur in a conserved CysxxCysxxCys residue motif. Comparison of the [3Fe-4S]+ clusters in FdI and Desulfovibrio gigas ferredoxin II, refined at 1.7 A resolution, indicates that within the limit of accuracy of the two refinements the cuboidal core is differently distorted in the two proteins. Comparison of the [3Fe-4S]+ core in FdI with the structure of a reduced [Fe3S4]o synthetic analog indicates that the protein-bound cluster displays distortions not intrinsic to the core itself. Nevertheless, both [3Fe-4S]+ and [Fe3S4]o cores have metric features consistent with expected trends due to net charge on Fe and valency of S, and both exhibit a splayed configuration with respect to their three mu2S atoms in the absence of a fourth Fe. Comparison of the [4Fe-4S]2+ cluster in FdI with the structures of [Fe4S4]2+ synthetic analogs shows that the protein bound and synthetic cubanes are very similar in geometric parameters, including the presence of tetragonal distortion in the FdI cluster common to this oxidation state.

Atomic resolution (0.94 A) structure of Clostridium acidurici ferredoxin. Detailed geometry of [4Fe-4S] clusters in a protein

The crystal structure of the 2[4Fe-4S] ferredoxin from Clostridium acidurici has been solved using X-ray diffraction data extending to atomic resolution, 0.94 A, recorded at 100 K. The model was refined with anisotropic representation of atomic displacement parameters for all non-hydrogen atoms and with hydrogens riding on their parent atoms. Stereochemical restraints were applied to the protein chain but not to the iron-sulfur clusters. The final R factor is 10.03 % for all data. Inversion of the final least-squares matrix allowed direct estimation of the errors of individual parameters. The estimated errors in positions for protein main chain atoms are below 0.02 A and about 0.003 A for the heavier [4Fe-4S] cluster atoms. Significant differences between the stereochemistry of the two clusters and distortion of both of them from ideal Td tetrahedral symmetry can be defined in detail at this level of accuracy. Regions of alternative conformations include not only protein side chains but also two regions of the main chain. One such region is the loop of residues 25-29, which was highly disordered in the room temperature structure.

Photoinduced cyclic electron transfer in Rhodocyclus tenuis cells: participation of HiPIP or cyt c8 depending on the ambient redox potential

We demonstrate the participation of a cytochrome c8 and a high-potential iron-sulfur protein (HiPIP) in the photoinduced electron transfer in whole cells of Rhodocyclus tenuis depending on the redox state or background continuous illumination. At high redox potentials (above 350 mV) or under a strong background illumination (5 W m-2), the cytochrome c8 acts as the physiological electron donor to the photo-oxidized high-potential hemes of the tetraheme cytochrome bound to the reaction center. For redox potentials ranging from 200 to 310 mV or under weak background illumination (1. 25 W m-2), the electron carrier is the HiPIP. The electron transfer between cyt c8 and HiPIP and the tetraheme cytochrome has half-times of 300 and 480 micros, respectively. A slow electrogenic phase of the membrane potential is linked to their rereduction. This phase is sensitive to a specific inhibitor of the cyt bc1 complex, indicating involvement of cyt c8 and HiPIP in the photoinduced cyclic electron transfer at these two redox conditions.

Topological chirality of iron-sulfur proteins

An examination of x-ray structures of single-cluster [4Fe-4S] proteins in the Protein Data Bank has revealed that all redox proteins and the glutamine 5-phosphoribosyl-l-pyrophosphate amidotransferase from Bacillus subtilis have a topological configuration arbitrarily designated as D, whereas the DNA repair enzyme endonuclease III from Escherichia coli has the opposite topological configuration L. This is the first example in which both senses of topological chirality have been observed in a class of proteins.

Cloning and sequencing of the gene encoding the high potential iron-sulfur protein (HiPIP) from the purple sulfur bacterium Chromatium vinosum

The gene encoding the high potential iron-sulfur protein (HiPIP) of Chromatium vinosum strain D (DSM 180T) was cloned from an EcoRI-HindIII digest of genomic DNA. A nucleotide sequence of 648 bp length was determined which contained the coding region and putative promoter and termination sites. The gene codes for a 122 residue 12761 Da protein. The C-terminal 85 residues are those of the previously biochemically determined sequence, whereas the N-terminal 37 residues constitute a leader peptide which shows characteristics of the double arginine signal sequences of complex cofactor containing periplasmic proteins.