Interchangeability of related proteins and autonomy of function. The morphogenetic proteins of filamentous phage f1 and IKe cannot replace one another

Nonuniformly sampled exclusively-13 C/15 N 4D solid-state NMR experiments: Assignment and characterization of IKe phage capsid

An important step in the process of protein research by NMR is the assignment of chemical shifts. In the coat protein of IKe bacteriophage, there are 53 residues making up a long helix resulting in relatively high spectral ambiguity. Assignment thus requires the collection of a set of three-dimensional (3D) experiments and the preparation of sparsely labeled samples. Increasing the dimensionality can facilitate fast and reliable assignment of IKe and of larger proteins. Recent progress in nonuniform sampling techniques made the application of multidimensional NMR solid-state experiments beyond 3D more practical. 4D ¹ H-detected experiments have been demonstrated in high-fields and at spinning speeds of 60 kHz and higher but are not practical at spinning speeds of 10-20 kHz for fully protonated proteins. Here, we demonstrate the applicability of a nonuniformly sampled 4D ¹³ C/¹⁵ N-only correlation experiment performed at a moderate field of 14.1 T, which can incorporate sufficiently long acquisition periods in all dimensions. We show how a single CANCOCX experiment, supported by several 2D carbon-based correlation experiments, is utilized for the assignment of heteronuclei in the coat protein of the IKe bacteriophage. One sparsely labeled sample was used to validate sidechain assignment of several hydrophobic-residue sidechains. A comparison to solution NMR studies of isolated IKe coat proteins embedded in micelles points to key residues involved in structural rearrangement of the capsid upon assembly of the virus. The benefits of 4D to a quicker assignment are discussed, and the method may prove useful for studying proteins at relatively low fields.

Cryo-electron microscopy structure of the filamentous bacteriophage IKe

The filamentous bacteriophage IKe is one of many nonenveloped bacterial viruses that encapsulate a circular single-stranded viral genome in the phage capsid shell. The shell of IKe is comprised of about 3,100 copies of the IKe major coat protein. Atomic-resolution structures of filamentous phages are scarce, and the structure of the single-stranded DNA is a matter of debate. Our cryo-electron microscopy structure of the filamentous bacteriophage IKe at a resolution of 3.4 Å provides atomic details on the structure of the major coat protein, the symmetry of the capsid shell, and the key interactions driving its assembly. We propose a model for the conformation of the circular single-stranded DNA core and the interactions between the capsid shell and inner DNA core.

The filamentous bacteriophage IKe infects Escherichia coli cells bearing IncN pili. We report the cryo-electron microscopy structure of the micrometer-long IKe viral particle at a resolution of 3.4 Å. The major coat protein [protein 8 (p8)] consists of 47 residues that fold into a ∼68-Å-long helix. An atomic model of the coat protein was built. Five p8 helices in a horizontal layer form a pentamer, and symmetrically neighboring p8 layers form a right-handed helical cylinder having a rise per pentamer of 16.77 Å and a twist of 38.52°. The inner surface of the capsid cylinder is positively charged and has direct interactions with the encapsulated circular single-stranded DNA genome, which has an electron density consistent with an unusual left-handed helix structure. Similar to capsid structures of other filamentous viruses, strong capsid packing in the IKe particle is maintained by hydrophobic residues. Despite having a different length and large sequence differences from other filamentous phages, π–π interactions were found between Tyr9 of one p8 and Trp29 of a neighboring p8 in IKe that are similar to interactions observed in phage M13, suggesting that, despite sequence divergence, overall structural features are maintained.

Structural and energetic basis of infection by the filamentous bacteriophage IKe

Filamentous phage use the two N-terminal domains of their gene-3-proteins to initiate infection of Escherichia coli. One domain interacts with a pilus, and then the other domain binds to TolA at the cell surface. In phage fd, these two domains are tightly associated with each other, which renders the phage robust but non-infectious, because the TolA binding site is inaccessible. Activation for infection requires partial unfolding, domain disassembly and prolyl isomerization. Phage IKe infects E. coli less efficiently than phage fd. Unlike in phage fd, the pilus- and TolA-binding domains of phage IKe are independent of each other in stability and folding. The site for TolA binding is thus always accessible, but the affinity is very low. The structures of the two domains, analysed by X-ray crystallography and by NMR spectroscopy, revealed a unique fold for the N-pilus-binding domain and a conserved fold for the TolA-binding domain. The absence of an activation mechanism as in phage fd and the low affinity for TolA probably explain the low infectivity of phage IKe. They also explain why, in a previous co-evolution experiment with a mixture of phage fd and phage IKe, all hybrid phage adopted the superior infection mechanism of phage fd.

Experimental evolution of conflict mediation between genomes

Transitions to new levels of biological complexity often require cooperation among component individuals, but individual selection among those components may favor a selfishness that thwarts the evolution of cooperation. Biological systems with elements of cooperation and conflict are especially challenging to understand because the very direction of evolution is indeterminate and cannot be predicted without knowing which types of selfish mutations and interactions can arise. Here, we investigated the evolution of two bacteriophages (f1 and IKe) experimentally forced to obey a life cycle with elements of cooperation and conflict, whose outcome could have ranged from extinction of the population (due to selection of selfish elements) to extreme cooperation. Our results show the de novo evolution of a conflict mediation system that facilitates cooperation. Specifically, the two phages evolved to copackage their genomes into one protein coat, ensuring cotransmission with each other and virtually eliminating conflict. Thereafter, IKe evolved such extreme genome reduction that it lost the ability to make its own virions independent of f1. Our results parallel a variety of conflict mediation mechanisms existing in nature: evolution of reduced genomes in symbionts, cotransmission of partners, and obligate coexistence between cooperating species.

Association of the cytoplasmic membrane protein XpsN with the outer membrane protein XpsD in the type II protein secretion apparatus of Xanthomonas campestris pv. campestris

An xps gene cluster composed of 11 open reading frames is required for the type II protein secretion in Xanthomonas campestris pv. campestris. Immediately upstream of the xpsD gene, which encodes an outer membrane protein that serves as the secretion channel by forming multimers, there exists an open reading frame (previously designated ORF2) that could encode a protein of 261 amino acid residues. Its N-terminal hydrophobic region is a likely membrane-anchoring sequence. Antibody raised against this protein could detect in the wild-type strain of X. campestris pv. campestris a protein band with an apparent molecular mass of 36 kDa by Western blotting. Its aberrant slow migration in sodium dodecyl sulfate-polyacrylamide gels might be due to its high proline content. We designated this protein XpsN. By constructing a mutant strain with an in-frame deletion of the chromosomal xpsN gene, we demonstrated that it is required for the secretion of extracellular enzyme by X. campestris pv. campestris. Subcellular fractionation studies indicated that the XpsN protein was tightly associated with the membrane. Sucrose gradient sedimentation followed by immunoblot analysis revealed that it primarily appeared in the cytoplasmic membrane fractions. Immune precipitation experiments indicated that the XpsN protein was coprecipitated with the XpsD protein. In addition, the XpsN protein was co-eluted with the (His)(6)-tagged XpsD protein from the metal affinity chromatography column. All observations suggested that the XpsN protein forms a stable complex with the XpsD protein. In addition, immune precipitation analysis of the XpsN protein with various truncated XpsD proteins revealed that the C-terminal region of the XpsD protein between residues 650 and 759 was likely to be involved in complex formation between the two.

Tapping the potential of molecular libraries in functional genomics

Functional genomics is facing the challenge of functionally identifying thousands of genes generated by the various genome projects during the past decade. Success will require novel high-capacity technologies that can cope with very large numbers of molecules. Here, Carl Borrebaeck reviews recent developments in molecular libraries and their role in rational gene identification.

Filamentous phage assembly: variation on a protein export theme

Biogenesis of both filamentous phage and type-IV pili involves the assembly of many copies of a small, integral inner membrane protein (the phage major coat protein or pilin) into a helical, tubular array that passes through the outer membrane. The occurrence of related proteins required for assembly and export in both systems suggests that there may be similarities at the mechanistic level as well. This report summarizes the properties of filamentous phage and the proteins required for their assembly, with particular emphasis on features they may share with bacterial protein export and pilus biogenesis systems, and it presents evidence that supports the hypothesis that one of the phage proteins functions as an outer membrane export channel.

The A protein of the filamentous bacteriophage Cf of Xanthomonas campestris pv. citri

Filamentous bacteriophages have very strict host specificities. Experiments were performed to investigate whether the A protein of the filamentous phage Cf, which infects Xanthomonas campestris pv. citri but not X. campestris pv. oryzae, is involved in determining Cf's host specificity. The gene encoding the A protein of Cf was cloned and expressed in X. campestris pv. citri. The genomic DNA of another filamentous bacteriophage, Xf, which infects X. campestris pv. oryzae but not X. campestris pv. citri, was then introduced by electroporation into X. campestris pv. citri that had expressed the A protein of Cf. The progeny phages thus produced were able to infect both X. campestris pv. oryzae and X. campestris pv. citri, indicating that the A protein of Cf was incorporated into the viral particles of Xf and conferred upon Xf the ability to infect the host of Cf. Inactivation of the A protein gene abolished the infectivity of Cf. The results of this study indicate that the A protein of Cf is responsible for controlling the host specificity of Cf.

Module swaps between related translocator proteins pIV(f1), pIV(IKe) and PulD: identification of a specificity domain

In Gram-negative bacteria, type II and type III secretion and filamentous phage assembly systems use related outer membrane proteins for substrate-specific transport across the outer membrane. We show here that the specificity domain of the phage f1 outer membrane protein pIV is contained within the 149 N-terminal amino acid residues. When the pIV(f1) specificity domain is fused to the translocator domain of the related pIV of phage IKe, the chimeric construct supports f1 but not IKe assembly. Functional coupling between the two domains in this chimeric construct is poor and is improved by a single amino acid change in the translocator domain of the pIV(IKe). In native pIV(IKe), two amino acid changes within its specificity domain are both necessary and sufficient to change the specificity from IKe to f1 assembly. Analysis of 39 chimeric constructs between pIV(f1) and the outer membrane protein PulD of the pullulanase secretion system failed to identify a comparable exchangeable specificity domain. These results indicate that the two domains may not function autonomously, and suggest that tertiary and quarternary changes of the entire translocator component rather than of an autonomous functional domain are required for specific translocation across the outer membrane.

Extending filamentous phage host range by the grafting of a heterologous receptor binding domain

fd and IKe are two similar filamentous phage which infect their hosts by means of pili found on the host membrane: fd infects bacteria bearing F pili, whereas IKe infects bacteria bearing N or I pili. Infection is mediated by the gene 3 protein (g3p), which of the nine proteins found in both phage is the most diverse. Previous attempts to incorporate g3p from one phage into the other by complementation have been unsuccessful [Bross et al. (1988) J. Gen. Microbiol. 134, 461-471]. Here we have grafted different parts of IKe g3p to the end of fd g3p and so augmented the host range of fd phage. We show that phage bearing such chimeric g3p are able to infect bacteria bearing both N and F pili providing they contain at least the receptor domain of IKe g3p, the infection of N bearing bacteria occurring at a level 70,000 times greater than background. This level of infection can be increased tenfold by including the glycine-rich domain as well. Addition of the penetration domain does not improve the level of infection above that of the receptor domain alone, indicating that the fd penetration domain is functional in the infection of bacteria bearing either N or F pili. Similarly derived fd phagemid also show increased infection of bacteria bearing N pili, albeit at much lower levels, suggesting that efficient infection requires more than one functional g3p on the surface of the phage.

Essential role of a sodium dodecyl sulfate-resistant protein IV multimer in assembly-export of filamentous phage

Filamentous phage f1 encodes protein IV (pIV), a protein essential for phage morphogenesis that localizes to the outer membrane of Escherichia coli, where it is found as a multimer of 10 to 12 subunits. Introduction of internal His or Strep affinity tags at different sites in pIV interfered with its function to a variable extent. A spontaneous second-site suppressor mutation in gene IV allowed several different insertion mutants to function. The identical mutation was also isolated as a suppressor of a multimerization-defective missense mutation. A high-molecular-mass pIV species is the predominant form of pIV present in cells. This species is stable in 4% sodium dodecyl sulfate at temperatures up to 65 degrees C and is largely preserved at 100 degrees C in Laemmli protein sample buffer containing 4% sodium dodecyl sulfate. The suppressor mutation makes the high-molecular-mass form of wild-type pIV extremely resistant to dissociation, and it stabilizes the high-molecular-mass form of several mutant pIV proteins to extents that correlate with their level of function. Mixed multimers of pIV(f1) and pIV(Ike) also remain associated during heating in sodium dodecyl sulfate-containing buffers. Thus, sodium dodecyl sulfate- and heat-resistant high-molecular-mass pIV is derived from pIV multimer and reflects the physiologically relevant form of the protein essential for assembly-export.

Moving through the membrane with filamentous phages

Filamentous phages are small, highly evolved parasites that can reproduce and disseminate without killing their host. During assembly, virion proteins are transferred from the host membrane to the single-stranded DNA phase genome and simultaneously secreted from the cell. Filamentous phage assembly shares certain features with bacterial processes responsible for the assembly of cell-surface structures and for extracellular protein secretion.

Single-stranded DNA binding protein encoded by the filamentous bacteriophage M13: structural and functional characteristics

The single-stranded DNA binding protein, or gene V protein (gVp), encoded by gene V of the filamentous bacteriophage M13 is a multifunctional protein that not only regulates viral DNA replication but also gene expression at the level of mRNA translation. It furthermore is implicated as a scaffolding and/or chaperone protein during the phage assembly process at the hostcell membrane. The protein is 87 amino acids long and its biological functional entity is a homodimer. In this manuscript a short description of the life cycle of filamentous phages is presented and our current knowledge of the major functional and structural properties and characteristics of gene V protein are reviewed. In addition models of the superhelical complexes gVp forms with ssDNA are described and their (possible) biological meaning in the infection process are discussed. Finally it is described that the 'DNA binding loop' of gVp is a recurring motif in many ssDNA binding proteins and that the fold of gVp is shared by a large family of evolutionarily conserved gene regulatory proteins.

Mutants at conserved positions in gene IV, a gene required for assembly and secretion of filamentous phages

The filamentous phage protein pIV is required for assembly and secretion of the virus and possesses regions homologous to those found in a number of Gram-negative bacterial proteins that are essential components of a widely distributed extracellular protein-export system. These proteins form multimers that may constitute an outer membrane channel that allows phage/protein egress. Three sets of f1 gene IV mutants were isolated at positions that are absolutely (G355 and P375) or largely (F381) conserved amongst the 16 currently known family members. The G355 mutants were non-functional, interfered with assembly of pIV+ phage, and made Escherichia coli highly sensitive to deoxycholate. The P375 mutants were non-functional and defective in multimerization. Many of the F381 mutants retained substantial function, and even those in which charged residues had been introduced supported some phage assembly. Some inferences about the roles of these conserved amino acids are made from the mutant phenotypes.

Analysis of the structure and subcellular location of filamentous phage pIV

The gene IV protein of filamentous bacteriophages is an integral membrane protein required for phage assembly and export. A series of gene IV::phoA fusion, gene IV deletion, and gene IV missense mutations have been isolated and characterized. The alkaline phosphatase activity of the fusion proteins suggests that pIV lacks a cytoplasmic domain. Cell fractionation studies indicate that the carboxy-terminal half of pIV mediates its assembly into the membrane, although there is no single, discrete membrane localization domain. The properties of gene IV missense and deletion mutants, combined with an analysis of the similarities between pIVs from various filamentous phage and related bacterial export-mediating proteins, suggest that the amino-terminal half of pIV consists of a periplasmic substrate-binding domain that confers specificity to the assembly-export system.

Interchangeability of the adsorption proteins of bacteriophages Ff and IKe

The wild-type adsorption protein (g3p) of filamentous phage IKe cannot be exchanged with its analogous protein in the related Ff (M13, fd, and f1) phage particles. Deletion mutants of the protein, however, are assembled into Ff phage particles. These hybrid Ff phage particles bearing deleted IKe g3p attach to N pili, thus conserving the host attachment property of the protein but not its infection-initiating function. This means that the attachment specificity is determined by IKe g3p independently of other phage components in contact with it. Infection initiation function, the process in which phage DNA is released into the host, in contrast seems to require either more complex structural features of the protein (for example, a certain oligomeric structure) provided only in the original particle, or a concerted action of g3p with another particle component, not replaceable by its homologous counterpart in the related phage.