Proton transfer and superionic conductivity in solids and gels

Organic Mixed Ionic-Electronic Conductors for Bioelectronic Sensors: Materials and Operation Mechanisms

The field of organic mixed ionic-electronic conductors (OMIECs) has gained significant attention due to their ability to transport both electrons and ions, making them promising candidates for various applications. Initially focused on inorganic materials, the exploration of mixed conduction has expanded to organic materials, especially polymers, owing to their advantages such as solution processability, flexibility, and property tunability. OMIECs, particularly in the form of polymers, possess both electronic and ionic transport functionalities. This review provides an overview of OMIECs in various aspects covering mechanisms of charge transport including electronic transport, ionic transport, and ionic-electronic coupling, as well as conducting/semiconducting conjugated polymers and their applications in organic bioelectronics, including (multi)sensors, neuromorphic devices, and electrochromic devices. OMIECs show promise in organic bioelectronics due to their compatibility with biological systems and the ability to modulate electronic conduction and ionic transport, resembling the principles of biological systems. Organic electrochemical transistors (OECTs) based on OMIECs offer significant potential for bioelectronic applications, responding to external stimuli through modulation of ionic transport. An in-depth review of recent research achievements in organic bioelectronic applications using OMIECs, categorized based on physical and chemical stimuli as well as neuromorphic devices and circuit applications, is presented.

Ultrafast Proton Conduction in an Aqueous Electrolyte Confined in Adamantane-like Micropores of a Sulfonated, Aromatic Framework

Sulfonated, cross-linked porous polymers are promising frameworks for aqueous high-performance electrolyte-host systems for electrochemical energy storage and conversion. The systems offer high proton conductivities, excellent chemical and mechanical stabilities, and straightforward water management. However, little is known about mass transport mechanisms in such nanostructured hosts. We report on the synthesis and postsynthetic sulfonation of an aromatic framework (SPAF-2) with a 3D-interconnected nanoporosity and varying sulfonation degrees. Water adsorption produces the system SPAF-2H20. It features proton exchange capacities up to 6 mequiv g-1 and exceptional proton conductivities of about 1 S cm-1. Two contributions are essential for the highly efficient transport. First, the nanometer-sized pores link the charge transport to the diffusion of adsorbed water molecules, which is almost as fast as bulk water. Second, continuous exchange between interface-bound and mobile species enhances the conductivities at elevated temperatures. SPAF-2H20 showcases how to tailor nanostructured electrolyte-host systems with liquid-like conductivities.

Structural and Charge Transport Properties of Composites of Phosphate-Silicate Protonic Glass with Uranyl Hydroxy-Phosphate and Hydroxy-Arsenate Obtained by Mechano-Chemical Synthesis Undergoing Hydration Changes

The introduction of the hydrogen economy, despite its obvious technological problems, creates a need for a significant number of niche-focused solutions, such as small-sized (10-100 W) fuel cells able to run on hydrogen of lesser purity than what is considered a standard in the case of PEMFCs. One of the solutions can be derived from the fact that an increase in the operational temperature of a cell significantly decreases its susceptibility to catalyst poisoning. Electrolytes suitable for the so-called medium temperature operational range of 120-400 °C, hence developed, are neither commercialized nor standardized. Among them, phosphate silicate protonically conductive glasses were found not only to reveal interestingly high levels of operational parameters, but also, to exhibit superior chemical and electrochemical stability over their polymeric counterparts. On the other hand, their mechanical properties, including cracking fragility, still need elaboration. Initial studies of the composite phosphate silicate glasses with uranyl-based protonic conductors, presented here, proved their value both in terms of application in fuel cell systems, and in terms of understanding the mechanism governing the charge transport mechanism in these and similar systems. It was found that whereas systems containing 10-20 wt% of the crystalline additive suffer from significant instability, materials containing 45-80 wt% (with an optimum at 60%) should be examined more thoughtfully. Moreover, the uranyl hydrogen phosphate was found to surpass its arsenate counterpart as an interesting self-healing behavior of the phase structure of the derived composite was proved.

Stabilization of the (C2H5)4NHSO4 High-Temperature Phase in New Silica-Based Nanocomposite Systems

In this study, the electrotransport, thermal and structural properties of composite solid electrolytes based on (C₂H₅)₄NHSO₄ plastic phase and silica (1 - x)Et₄NHSO_4-xSiO₂, where x = 0.3-0.9) were investigated for the first time. The composites were prepared by mechanical mixing of silica (300 m²/g, R_pore = 70Å) and salt with subsequent heating at temperatures near the Et₄NHSO₄ melting point. Heterogeneous doping is shown to change markedly the thermodynamic and structural parameters of the salt. It is important that, with an increase in the proportion of silica in the composites, the high-temperature disordered I4₁/acd phase is stabilized at room temperature, as this determines the properties of the system. Et₄NHSO₄ amorphization was also observed in the nanocomposites, with an increase in the matrix contents. The enthalpies of the endoeffects of salt melting and phase transitions (160 °C) changed more significantly than the Et₄NHSO₄ contents in the composites and completely disappeared at x = 0.9. The dependence of proton conductivity on the mole fraction reached a maximum at x = 0.8, which was three or four orders of magnitude higher than the value for pure Et₄NHSO₄, depending on the composition and the temperature. The maximum conductivity values were close to those for complete pore filling. The conductivity of the 0.2Et₄NHSO₄-0.8SiO₂ composite reached 7 ∗ 10^-3 S/cm at 220 °C and 10^-4 S/cm at 110 °C.

Improved Thermo-Mechanical Properties and Reduced Hydrogen Permeation of Short Side-Chain Perfluorosulfonic Acid Membranes Doped with Ti3C2Tx

Benefiting from its large specific surface with functional -OH/-F groups, Ti3C2Tx, a typical two-dimensional (2D) material in the recently developed MXene family, was synthesized and used as a filler to improve the properties of the short side-chain (SSC) perfluorosulfonic acid (PFSA) proton exchange membrane. It is found that the proton conductivity is enhanced by 15% while the hydrogen permeation is reduced by 45% after the addition of 1.5 wt% Ti3C2Tx filler into the SSC PFSA membrane. The improved proton conductivity of the composite membrane could be associated with the improved proton transport environment in the presence of the hydrophilic functional groups (such as -OH) of the Ti3C2Tx filler. The significantly reduced hydrogen permeation could be attributed to the incorporation of the impermeable Ti3C2Tx 2D fillers and the decreased hydrophilic ionic domain spacing examined by the small angle X-ray scattering (SAXS) for the composite membrane. Furthermore, improved thermo-mechanical properties of the SSC/Ti3C2Tx composite membrane were measured by dynamic mechanical analyzer (DMA) and tensile strength testing. The demonstrated higher proton conductivity, lower hydrogen permeation, and improved thermo-mechanical stability indicate that the SSC/Ti3C2Tx composite membranes could be a potential membrane material for PEM fuel cells operating above the water boiling temperature.

Single-ion conducting polymer electrolytes as a key jigsaw piece for next-generation battery applications

As lithium-ion batteries have been the state-of-the-art electrochemical energy storage technology, the overwhelming demand for energy storage on a larger scale has triggered the development of next-generation battery technologies possessing high energy density, longer cycle lives, and enhanced safety. However, commercial liquid electrolytes have been plagued by safety issues due to their flammability and instability in contact with electrodes. Efforts have focused on developing such electrolytes by covalently immobilizing anionic groups onto a polymer backbone, which only allows Li+ cations to be mobile through the polymer matrix. Such ion-selective polymers provide many advantages over binary ionic conductors in battery operation, such as minimization of cell polarization and dendrite growth. In this review, the design, synthesis, fabrication, and class are reviewed to give insight into the physicochemical properties of single-ion conducting polymer electrolytes. The standard characterization method and remarkable electrochemical properties are further highlighted, and perspectives on current challenges and future directions are also discussed.

Improving proton conduction of the Prussian blue analogue Cu3[Co(CN)6]2·nH2O at low humidity by forming hydrogel composites

Composites of Prussian blue analogue (PBA) adsorbed imidazole-acetic acid with polyvinyl alcohol hydrogel show excellent water-retention capacity and fast proton conduction at 25% RH in 298–353 K, herein X is the mass ratio of PBA to hydrogel.

Composite Sulfonated Polyether-Ether Ketone Membranes with SBA-15 for Electrochemical Energy Systems

The aim of this work is the evaluation of a Sulfonated Poly Ether-Ether Ketone (S-PEEK) polymer modified by the addition of pure Santa Barbara Amorphous-15 (SBA-15, mesoporous silica) and SBA-15 previously impregnated with phosphotungstic acid (PWA) fillers (PWA/SBA-15) in order to prepare composite membranes as an alternative to conventional Nafion^® membranes. This component is intended to be used as an electrolyte in electrochemical energy systems such as hydrogen and methanol Proton Exchange Membrane Fuel Cell (PEMFC) and Electrochemical Hydrogen Pumping (EHP). The common requirements for all the applications are high proton conductivity, thermomechanical stability, and fuel and oxidant impermeability. The morphology of the composite membranes was investigated by Scanning Electron Microscopy- Energy Dispersive X-ray Spectroscopy (SEM-EDS) analysis. Water Uptake (Wup), Ion Exchange Capacity (IEC), proton conductivity, methanol permeability and other physicochemical properties were evaluated. In PEMFC tests, the S-PEEK membrane with a 10 wt.% SBA-15 loading showed the highest performance. For EHP, the inclusion of inorganic materials led to a back-diffusion, limiting the compression capacity. Concerning methanol permeability, the lowest methanol crossover corresponded to the composites containing 5 wt.% and 10 wt.% SBA-15.

NH3/H2O-mediated proton conductivity and photocatalytic behaviour of Fe(ii)-hydroxyphosphonoacetate and M(ii)-substituted derivatives

Multifunctional Fe(ii)-hydroxyphosphonoacetate and M(ii)-substituted derivatives exhibit ammonia-tunable proton conductivity and photo-Fenton catalytic properties.

Synthesis of self-assembled nucleobases and their anhydrous proton conductivity

We synthesized self-assembled nucleobases (SANs), such as 1-dodecylthymine (DOT) or 9-dodecyladenine (DOA), in which the nucleobase is immobilized on a long alkyl chain. The thermal stability of the SAN was increased by mixing with the acidic surfactant mono-dodecyl phosphate (MDP). Additionally, the SAN-MDP composite material showed proton conductivity of 4.62 × 10-4 S cm-1 at 160 °C under anhydrous conditions. Additionally, the activation energy of the proton conduction was approximately 0.2 eV and this value was one order of magnitude higher than that of a typical humidified perfluorinated membrane, in which the proton can be moved by vehicle molecules, such as water molecules. In contrast, when the nucleobase without the immobilization of a long alkyl chain was mixed with MDP, the proton conductivity of these composite materials was two orders of magnitude less than that of the SAN-MDP composite. Therefore, we measured the XRD spectra of the SAN-MDP composite material. As a result, the SAN-MDP composite material showed a self-assembled structure with a two-dimensional proton conducting pathway, such as a lamellar structure, and that the anhydrous proton conduction was related to the interaction between the nucleobase of the SAN and the phosphate group of MDP. Consequently, the self-assembled nucleobase derivatives have the potential for use as novel anhydrous proton conductors with a two-dimensional proton conducting pathway.

Functionality in metal-organic framework minerals: proton conductivity, stability and potential for polymorphism

Rare metal-organic framework (MOF) minerals stepanovite and zhemchuzhnikovite can exhibit properties comparable to known oxalate MOF proton conductors, including high proton conductivity over a range of relative humidities at 25 °C, and retention of the framework structure upon thermal dehydration. They also have high thermodynamic stability, with a pronounced stabilizing effect of substituting aluminium for iron, illustrating a simple design to access stable, highly proton-conductive MOFs without using complex organic ligands.

Dehydration-Triggered Charge Transfer and High Proton Conductivity in (H3O)[NiIII(cyclam)][MII(CN)6] (M = Ru, Os) Cyanide-Bridged Chains

The coexistence of dehydration-driven charge transfer, magnetic interactions, and high proton conductivity was found in two bimetallic alternating CN-bridged chains {(H₃O)[Ni^III(cyclam)][M^II(CN)₆]·5H₂O} _n (M = Ru (1), Os (2); cyclam = 1,4,8,11-tetraazacyclotetradecane). Dehydration of these materials causes structural transformation and triggers charge transfer between the metal centers: Ni^III-NC-M^II → Ni^II-NC-M^III. The CT process, whose extent is tuned by the change of the anionic building block, causes significant increase of magnetic moment, appearance of antiferromagnetic interactions, and noticeable changes in color. The high conductivity values of σ = 1.09 × 10^-3 (1) and 1.12 × 10^-3 S cm^-1 (2) at 295 K and 100% relative humidity allow the classification of the materials as superionic conductors. The proton conduction occurs according to the Grotthuss mechanism as a hopping of protons between H-bonded water molecules due to the presence of the H₃O⁺ ions, which compensate negative charge of the coordination chains.

High-Throughput Synthesis of Pillared-Layered Magnesium Tetraphosphonate Coordination Polymers: Framework Interconversions and Proton Conductivity Studies

Novel pillared-layered framework materials were synthesized by high-throughput or microwave-assisted methodology that contain Mg2+ and the zwitterionic linker HDTMP (hexamethylenediamine-N,N,N′,N′-tetrakis(methylenephosphonic acid)). Three compounds were structurally characterized by X-ray powder diffraction. In the compound {Mg[(HO3PCH2)2N(CH2)6N(CH2PO3H2)2]·(H2O)}n(1), obtained at 140 °C by hydrothermal or microwave-assisted reaction, the layers are built by isolated Mg2+ octahedra coordinated by oxygen atoms from six different zwitterionic HDTMP ligands. Each amino-bis(methylenephosphonate) moiety links three Mg2+ ions, bridging two of them through one phosphonate group and connecting the third polyhedron in a monodentate fashion. In Compound 2, {Mg[(HO3PCH2)2N(CH2)6N(CH2PO3H2)2]}n, hydrothermally synthesized at 180 °C, the layers are composed of bidentate amino-bis(methylenephosphonate) moieties connected to three Mg2+ ions, with one of the phosphonate groups acting as a bridging ligand. Various subtle structural changes are noted for the other two compounds. Thermodiffraction of 1 reveals that a crystalline-to-crystalline phase transformation occurs concomitantly with its dehydration, leading to a new anhydrous phase, namely, {Mg[(HO3PCH2)2N(CH2)6N(CH2PO3H2)2]}n(1deh). This process is fully reversible upon equilibrating the solid at room temperature. The reported compounds can adsorb ammonia and CO2. Compound 1 exhibits a moderate proton conductivity, ~1.5 × 10−5 S·cm−1 at 80 °C and 95% RH, that increases a half order of magnitude after experiencing a complete dehydration/rehydration process, 1→1deh→1.

Creating Lithium-Ion Electrolytes with Biomimetic Ionic Channels in Metal-Organic Frameworks

Solid-state electrolytes are the key to the development of lithium-based batteries with dramatically improved energy density and safety. Inspired by ionic channels in biological systems, a novel class of pseudo solid-state electrolytes with biomimetic ionic channels is reported herein. This is achieved by complexing the anions of an electrolyte to the open metal sites of metal-organic frameworks (MOFs), which transforms the MOF scaffolds into ionic-channel analogs with lithium-ion conduction and low activation energy. This work suggests the emergence of a new class of pseudo solid-state lithium-ion conducting electrolytes.

Synthesis and proton conductivity of two novel molybdate polymers

Two molybdate polymers H₄[Co(phen)₃]₂[NaO(H₂O)(l-Mo₈O₂₆)]₂·2H₂O (1) and H₂[TEDA][Mo₄O₁₃]·3H₂O (2) were synthesized, proton conductivity of 1 was 3.06 × 10⁻³ S cm⁻¹.

Raman investigation on the behavior of parasibirskite CaHBO3 at high pressure

Knowledge about the stability of hydrous borates and borosilicates at high pressures are of critical importance to our understanding on the boron geochemical cycle. Raman spectroscopic measurements of parasibirskite CaHBO₃, containing the [BO₂(OH)] groups, have been made to pressures up to 5.4GPa. The Raman data show that a progressive structural evolution from ambient pressure to 5.4GPa can be accounted for by the same monoclinic phase P2₁/m, where the splitting of several Raman bands observed at some pressures is interpreted as the effect of the complex disordering in the H-bond network that has bifurcated H-bonds and ½-occupied H sites. There is no unambiguous evidence for phase transition to the ordered P2₁ monoclinic phase predicted by first-principles calculations at T=0K (W. Sun et al., Can. Miner., 2011). On the contrary, the disordering of parasibirskite, evidenced by the widening and attenuating Raman spectra, increases markedly at high pressures above 4.5GPa that results in incipient amorphization. Comparison of theoretical (lattice-dynamical) and experimental Raman spectra allows the reliable interpretation of almost all observed bands. The strongest symmetric B-O stretching band v₁ at the wavenumber 908cm^-1, which is split into a doublet at high pressures, exhibits a shift rate of 4.22cm^-1/GPa for the main component.

A novel oxalate-based three-dimensional coordination polymer showing magnetic ordering and high proton conductivity

A novel example of an oxalate-based multifunctional material is reported here showing the coexistence of low-temperature magnetic ordering and high proton conductivity.

Imidazolium cation transportation in a 1-D coordination polymer

We synthesized a coordination polymer, [EtMeIm][Cu(bpy)(Me₂PO₄)₃], containing an anionic 1-D chain and an ethyl methyl imidazolium cation.

Assembly of inorganic [Mo2S2O2]2+ panels connected by selenite anions to nanoscale chalcogenide-polyoxometalate clusters

We describe how supramolecular assembly, mediated by control of the ratio of the hetero-atoms in the units [Mo₂S₂O₂]²⁺ and SeO₃^2- leads to the formation of new types of building blocks, [(Mo₂O₂S₂)₃(OH)₄(H₂O)₆(SeO₃)] = {Mo₆} and [(Mo₂O₂S₂)₂(OH)₂(H₂O)₄(SeO₃)] = {Mo₄} which are linked in an type of inorganic 'panelling' to the assembly of a range of new clusters 1-3 with the general formula {(Mo₂O₂S₂) _x (OH) _y (SeO₃) _z (H₂O) _w } ^n-, where x, y, z, w, n = [8, 0, 20, 8, 24] for 1, [14, 14, 17, 8, 20] for 2 and [8, 8, 8, 0, 8] for 3. Cluster 1, a rare example of inorganic cryptand, exhibits an elliptical "endo" motif defining an anisotropic ellipse with the dimensions 1.7 × 1.0 nm, with pores ranging from 5.3 to 6.4 Å and site selective cation recognition properties; cluster 2 exhibits an "exo" structural motif constructed by 3 × {Mo₆} and 2 × {Mo₄} panels spanning a cross shape 2.4 × 2.0 nm and cluster 3 a ring shaped structure of a 1.5 nm in diameter. The control of endo vs. exo topology as a function of the Se : Mo ratio is reflected to the difference in surface area of ca. 500 Ų between clusters 1 and 2 intermolecular interactions and proton conduction properties, and this work shows that very simple synthetic parameters can critically change the structure and properties of all-inorganic nanoscale chalcogenide-polyoxometalates.

Coordination-Driven Self-Assembly of a 2D Graphite-Like Framework Constructed from High-Nuclear Ce10 Cluster Encapsulated Polyoxotungstates

It is challenging to explore and prepare high-nuclear lanthanide (Ln) cluster-encapsulated polyoxometalates (POMs). Herein, we fabricate an unprecedented Ce10-cluster-embedded polyoxotungstate (POT) (TMA)14H2[Ce(III)(H2O)6]{[Ce(IV)7Ce(III)3O6(OH)6(CO3)(H2O)11][(P2W16O59)]3}·41H2O (1) (TMA = tetramethyleneamine) by coordination-driven self-assembly strategy, which contains the largest Ce cluster [Ce(IV)7Ce(III)3O6(OH)6(CO3)(H2O)11] (Ce10) in all the Ln-containing POM chemistry to date. Self-assembly of the in situ dilacunary [P2W16O59](12-) fragments and mixed Ce(3+) and Ce(4+) ions by means of coordination-driven force results in a novel 2D graphite-like framework constructed from mixed-valent cerium(III/IV) cluster {Ce10} encapsulated poly(POT) units and Ce(3+) ions. The most remarkable feature is that the skeleton of the centrosymmetric Ce10-cluster-embedded POT trimer contains three dilacunary [P2W16O59](12-) fragments trapping a novel {Ce10} cluster via 18 terminal-oxo and three μ4-oxo atoms.

Engineering the proton conductivity of metal–organic hybrid materials by varying the coordination mode of the ligand

We report the adjustment of proton conductivity by varying the coordination mode of a ligand.

Assembly of thiometalate-based {Mo16 } and {Mo36 } composite clusters combining [Mo2O2S2 ](2+) cations and selenite anions

A new family of thiometalate-based composite molecular materials is synthesized and characterized. 1.6 and 1.9 nm-sized clusters are observed in the gas phase utilizing high-resolution ESI-MS. The diversity of the selenite anions as an inorganic ligand is demonstrated by the isolation of the highest nuclearity selenium-based oxothiometalate materials reported so far. The observed proton conductivity of the selenite based oxothiometalate species renders them as promising alternative materials for fuel-cell applications.