Ethylenimine polymers

Inverse Vulcanization of Aziridines: Enhancing Polysulfides for Superior Mechanical Strength and Adhesive Performance

This study introduces a novel approach to inverse vulcanization by utilizing a commercially available triaziridine crosslinker as an alternative to conventional olefin-based crosslinkers. The model reactions reveal a self-catalyzed ring-opening of "unactivated" aziridine with elemental sulfur, forming oligosulfide-functionalized diamines. The triaziridine-derived polysulfides exhibit impressive mechanical properties, achieving a maximum stress of ~8.3 MPa and an elongation at break of ~107 %. The incorporation of silicon dioxide (20 wt %) enhances the composite's rigidity, yielding a Young's modulus of ~0.94 GPa. Furthermore, these polysulfides display excellent adhesion strength on various substrates, such as aluminum (~7.0 MPa), walnut (~9.6 MPa), and steel (~11.0 MPa), with substantial retention of adhesion strength (~3.3 MPa on steel) at -196 °C. The straightforward synthetic process, combined with the accessibility of the triaziridine crosslinker, emphasizes the potential for further innovations in sulfur polymer chemistry.

Helical polyamines

Polymer microstructures rely on tacticity, yet exploration in polyamines has focused predominantly on atactic polymers. We introduce a method to synthesize a diverse library of ortho and para-cyanobenzenesulfonyl-activated-methyl aziridines using R, S, and racemic alaninol. Living anionic ring-opening polymerization of racemic sulfonyl aziridines yields soluble polymers, while enantiomerically-pure sulfonyl aziridines follow a dispersion polymerization with complete monomer conversion giving access to stereoblock copolymers. Removal of activation groups is achieved using dodecanethiol and tert-butylimino-tri(pyrrolidino)phosphorane to obtain isotactic or atactic linear polypropylene imines (LPPIs). High-purity L-PPIs are obtained in salt and neutral forms with high yields. Stereoblock copolymers of poly-R-block-S-polysulfonamides and respective polypropylene imine stereoblocks are synthesized, revealing helical structures in water influenced by the monomer type and sequence in CD spectroscopy. Molecular dynamics simulations confirm the helical nature of isotactic LPPIs in water. Bulk characterization demonstrates the first crystalline isotactic polyamines via spherulite growth in polarized light, atomic force microscopy and XRD analyses. In cell-transfection studies, the synthesized isotactic LPPIs exhibit lower toxicity and transfection efficiency than commercial hyperbranched polyethylene imine, with longer chains showing increased transfection efficiency. These isotactic polymers open avenues for complex macromolecular architectures with optically active polyamines akin to poly(amino acid)s but lacking hydrolytically cleavable amide links.

Step-growth Polymerization of Aziridines with Elemental Sulfur: Easy Access to Linear Polysulfides and Their Use as Recyclable Adhesives

The bulk radical polymerization of bis(aziridine) with molten elemental sulfur resulted in brittle, cross-linked polymers. However, when the bis(aziridine) was treated with elemental sulfur in the presence of an organobase, the ring-opening reaction of aziridine with oligosulfide anions occurred, leading to the formation of linear polymers by step-growth polymerization. These newly synthesized polymers possess repeating units containing a sulfonamide or amide functional moiety and oligosulfide bonds with an average sulfur segment of about two. A small molecular model reaction confirmed the nucleophilic addition reaction of elemental sulfur to aziridine. It was verified that S-S dynamic bond exchange takes place in the presence of an organic base within the linear chains. The mixture of the synthesized polysulfides with pyridine exhibits exceptional adhesive properties when applied to steel, and aluminum substrates. Notably, these prepared adhesives displayed good reusability due to the dynamic S-S exchange and complete recyclability due to their solution processability. This elemental sulfur-involved polymerization approach represents an innovative method for the synthesis of advanced sulfur-containing polymers, demonstrating the potential for various applications in adhesives and beyond.

Rapid synthesis of functional poly(ester amide)s through thiol-ene chemistry

Poly(ester amide)s (PEAs) bearing various side chains were synthesized by post-polymerization modification of PA-1, a vinylidene containing PEA. The thiols 1-dodecanethiol (1A-SH), 2-phenylethanethiol (1B-SH), 2-mercaptoethanol (1C-SH), thioglycolic acid (1D-SH), furfuryl mercaptan (1E-SH) and sodium-2-mercaptoethanesulfonate (1F-SH) were reacted with PA-1 to form PEAs PA-1A through PA-1F respectively. PEAs containing non-polar thiol side chains (PA-1A, PA-1B, PA-1E), showed little change in solubility compared to PA-1, while PEAs with more polar side chains improved solubility in more polar solvents. PA-1F, functionalized with sodium-2-mercaptoethanesulfonate, became water-soluble. The introduction of pendant functional groups impacted the thermal behaviors of PEAs in a wide range. The PEAs were thermally stable up to 368 °C, with glass transition temperatures (T_g) measured between 117 to 152 °C. Moreover, to demonstrate the versatility of the PEAs, thermal reprocessable networks and polyurethanes were successfully fabricated by reacting with a bismaleimide (1,6-bis(maleimido)hexane, 1,6-BMH) and a diisocyanate (4,4'-diphenylmethane diisocyanate, 4,4'-MDI), respectively. This study paves the way for the facile synthesis of functional poly(ester amide)s with great potential in many fields.

Synthesis and characterization of dendritic compounds containing nitrogen: monomer precursors in the construction of biomimetic membranes

In this article, we synthesized a novel dendritic 2-oxazoline, 2-(3,4,5-tris(4-dodecyloxybenzyloxy)phenyl)-4,5-dihydro-1,3-oxazole), and its amide precursor N-(2-hydroxyethyl)-3,4,5-tris(4-dodecyloxybenzyloxy)benzamide. Of the distinct synthetic routes explored, it was established that the direct amidation of esters with sodium methoxide followed by the dehydrative cyclisation with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone as oxidizing agent and triphenylphosphine was the most efficient route to synthesize the dendritic 2-oxazoline. Besides, N-(2-hydroxyethyl)-3,4,5-tris(4-dodecyloxybenzyloxy)benzamide exhibited a monotropic columnar mesophase, whilst the dendritic 2-oxazoline does not exhibited a liquid crystalline mesophase. At the end, the first attempts to polymerize the 2-oxazoline monomer via cationic ring opening polymerization showed promising results. Therefore, the dendritic 2-oxazoline could be used as a mesogenic monomer in the synthesis of side-chain liquid-crystalline polyoxazolines that might self-assembly into columnar structures.

Poly(2-isopropenyl-2-oxazoline) as a reactive polymer for materials development

Poly(2-isopropenyl-2-oxazoline) has attracted growing interest as a reactive polymer that can be used as a starting material for the construction of more complex structures.

Catalyst-free aziridine-based step-growth polymerization: a facile approach to optically active poly(sulfonamide amine)s and poly(sulfonamide dithiocarbamate)s

Step-growth polymerization of chiral bis(N-sulfonyl aziridine)s with diamines or bis(dialkyldithiocarbamate) in the absence of a catalyst allows the facile synthesis of optically active polysulfonamide derivatives.

Enzymes hosted in redox-active ionically cross-linked polyelectrolyte networks enable more efficient biofuel cells

Redox mediators are pivotal players in the electron transfer process between enzymes and electrodes. We present an alternative approach for redox mediation based on branched polyethyleneimine (BPEI) modified with an osmium complex. This redox polyelectrolyte is crosslinked with phosphate to produce colloidal particles with a diameter of ca. 1 μm, which, combined with glucose oxidase (GOx), can form electroactive assemblies through either layer by layer assembly (LbL) or one-pot drop-casting (OPDC). The addition of NaCl to these colloidal systems induces the formation of films that otherwise poorly grow, presenting an outstanding catalytic current. The system was tested as a bioanode delivering a power output of 148 μW per nmol of mediator. These results are explained in terms of the interactions of the ions with the polyelectrolyte and represent a new route for the development of bioelectrochemical devices involving redox mediators and enzymes.

Activated Monomer Polymerization of an N-Sulfonylazetidine

Previously, N-(methanesulfonyl)azetidine (MsAzet) was found to polymerize anionically via ring-opening at temperatures >100 °C to form p(MsAzet) in the presence of an anionic initiator. In the current report, potassium(azetidin-1-ylsulfonyl) methanide (KMsAzet), formed from deprotonation of the methanesulfonyl group of MsAzet by KHMDS, is shown to undergo spontaneous AROP at room temperature to form p(N-K-MsAzet). The structure of p(N-K-MsAzet) differs from that of p(MsAzet), as the sulfonyl groups are incorporated into the polymer backbone of p(N-K-MsAzet). Reaction of p(N-K-MsAzet) with MeOH produces p(N-H-MsAzet), a semicrystalline polymer with a structure like that of polyamides, but with sulfonylamides in place of the carboxamides found in polyamides. Reaction of p(N-K-MsAzet) with benzyl bromide results in the formation of amorphous p(N-Bn-MsAzet). P(N-K-MsAzet) is hypothesized to form via an activated monomer anionic polymerization; this is supported by polymerization kinetic data and structural characterization of the resulting polymers.

Bioinspired Polymer-Bound Organocatalysts for Direct Asymmetric Aldol Reaction: Experimental and Computational Studies

A series of poly(2-oxazoline) (POX) derivatives bearing prolinamide pendants were designed as organocatalysts and evaluated in the direct asymmetric aldol reaction between aromatic aldehydes and cyclic ketones. The structural variation of the alkyl spacer connecting the polymer backbone with the catalytic unit was applied so as to deduce structure–performance relationships combined with comparable experiments from model catalysts. Results showed that the POX-bound prolinamides can promote the aldol reaction more effectively as compared to their small-molecular and non-POX-bound analogs. The catalyst P3 containing the pyrrolidine moiety closer to the tertiary amide backbone exhibited the overall best catalytic efficiency, affording anti-products in 84% yield with 89% ee in the representative aldol addition of cyclohexanone to 4-nitrobenzaldehyde at a 10 mol.% catalyst loading. Furthermore, the influence of trifluoroacetic acid as an additive on the asymmetric transformation was investigated. Theoretical calculations revealed that the protonation of the aldehyde carbonyl group switched the activation mode of the aldol acceptor through hydrogen bond interactions, thereby changing the relative energy barrier of the enamine/aldehyde reaction transition states, which accounted well for the significant improvement in the enantioselectivity of the acidic additives observed experimentally.

Aziridines and azetidines: building blocks for polyamines by anionic and cationic ring-opening polymerization

The synthesis of aziridine and azetidine monomers and their ring-opening polymerization via different mechanisms is reviewed.

Anionic Ring-Opening Polymerization of N-(tolylsulfonyl)azetidines To Produce Linear Poly(trimethylenimine) and Closed-System Block Copolymers

The anionic ring-opening copolymerization of N-( p-tolylsulfonyl)azetidine ( pTsAzet) and N-( o-tolylsulfonyl)azetidine ( oTsAzet) produces poly( pTsAzet- co- oTsAzet) as a statistical copolymer. The pTsAzet/ oTsAzet copolymerization is living and allows for the synthesis of poly(sulfonylazetidine) of target molecular weights with narrow dispersities. ¹H NMR spectroscopy was used to monitor the kinetics of the polymerization and estimate the monomer reactivity ratios. It was found that the reactivity ratios for oTsAzet and pTsAzet at 180 °C are 1.66 and 0.60, respectively. The tosyl groups of p( pTsAzet- co- oTsAzet) were reductively removed to produce linear poly(trimethylenimine) (LPTMI). This represents the first route to LPTMI of controlled molecular weight and low dispersity. Finally, the slow kinetics of the sulfonylazetidine polymerization facilitated the synthesis of a block copolymer without requiring the sequential addition of monomer. Specifically, pTsAzet, oTsAzet, and ( N- p-toluenesulfonyl-2-methylaziridine) ( pTsMAz) were combined in solution. pTsMAz selectively polymerizes to form the first block at moderate temperature. After consumption of pTsMAz, the temperature was increased to copolymerize pTsAzet and oTsAzet and produce the block copolymer p( pTsMAz)- b-p( pTsAzet- co- oTsAzet).

The anionic ring-opening polymerization ofN-(methanesulfonyl)azetidine

The first anionic ring-opening polymerization of an activated azetidine is reported.

Full and partial hydrolysis of poly(2-oxazoline)s and the subsequent post-polymerization modification of the resulting polyethylenimine (co)polymers

This review discusses the full and partial hydrolysis of poly(2-oxazoline)s as well as the synthetic methods that have been reported to modify the resulting secondary amine groups.

Branched poly(ethyleneimine): a versatile scaffold for patterning polymer brushes by means of remote photocatalytic lithography

Patterning of functional surfaces is one of the cornerstones of nanotechnology as it allows the fabrication of sensors and lab-on-a-chip devices. Here, the patterning of self-assembled monolayers of branched poly(ethyleneimine) (bPEI) on silica was achieved by means of remote photocatalytic lithography. Moreover, when 2-bromoisobutyryl-modified bPEI was used, the resulting pattern could be amplified by grafting polymer brushes by means of surface-initiated atom transfer radical polymerization. In contrast to previous reports for the patterning of bPEI, the present approach can be conducted in minutes instead of hours, reducing the exposure time to UV radiation and enhancing the overall efficiency. Furthermore, our approach is much more user-friendly, allowing a facile fabrication of patterned initiator-modified surfaces and the use of inexpensive instrumentation such as a low-power UV source and a simple photomask. Considering the versatility of bPEI as a scaffold for the development of biosensors, patterning by means of remote photocatalytic lithography will open new opportunities in a broad field of applications.

Polyethylenimine: a very useful ionic polymer in the design of immobilized enzyme biocatalysts

This review discusses the possible roles of polyethylenimine (PEI) in the design of improved immobilized biocatalysts from diverse perspectives.

Hyperbranched Poly(Ether Amide)s via Nucleophilic Ring Opening Reaction of Oxazolines

The nucleophilic ring opening addition reaction of phenol groups towards oxazoline units has been used for the preparation of hyperbranched poly(ether amide)s. For this the AB2 monomer 2-(3,5-bishydroxyphenyl)-1,3-oxazoline was synthesized and converted in a highly branched polymer in bulk or solution at temperatures above 190°C. The resulting hyperbranched polymers exhibit a degree of branching of 50%, as verified by high-resolution NMR spectroscopy, and are highly soluble in polar organic solvents, for example DMF and DMAc, with low solution viscosity. Their glass transition temperatures are in the region of 170°C and degradation does not start below 300°C. Melt rheology measurements revealed a predominantly elastic behaviour with a relatively high viscosity at low frequency. A lower melt viscosity was achieved by end group modification. Hyperbranched poly(ether amide)s with phenolic and acetate end groups are fully miscible with linear polyamide 6. When a small amount of the hyperbranched material is added to the PA6 matrix a significant reduction of the melt viscosity could be achieved without changing the mechanical properties of the matrix polymer.

Novel poly(2-oxazoline)s with pendant l-prolinamide moieties as efficient organocatalysts for direct asymmetric aldol reaction

Novel poly(2-oxazoline)-bound l-prolinamides have been developed as aldolase biomimetic systems for direct aldol reaction with high stereoselectivity.

Synthesis of well-defined core–shell nanoparticles based on bifunctional poly(2-oxazoline) macromonomer surfactants and a microemulsion polymerization process

Surface-functional nanoparticles have been fabricated by utilizing bifunctional poly(2-oxazoline) macromonomers as surfactants in a microemulsion process.

Life cycle impacts of ethanol production from spruce wood chips under high-gravity conditions

BACKGROUND

Development of more sustainable biofuel production processes is ongoing, and technology to run these processes at a high dry matter content, also called high-gravity conditions, is one option. This paper presents the results of a life cycle assessment (LCA) of such a technology currently in development for the production of bio-ethanol from spruce wood chips.

RESULTS

The cradle-to-gate LCA used lab results from a set of 30 experiments (or process configurations) in which the main process variable was the detoxification strategy applied to the pretreated feedstock material. The results of the assessment show that a process configuration, in which washing of the pretreated slurry is the detoxification strategy, leads to the lowest environmental impact of the process. Enzyme production and use are the main contributors to the environmental impact in all process configurations, and strategies to significantly reduce this contribution are enzyme recycling and on-site enzyme production. Furthermore, a strong linear correlation between the ethanol yield of a configuration and its environmental impact is demonstrated, and the selected environmental impacts show a very strong cross-correlation ([Formula: see text] in all cases) which may be used to reduce the number of impact categories considered from four to one (in this case, global warming potential). Lastly, a comparison with results of an LCA of ethanol production under high-gravity conditions using wheat straw shows that the environmental performance does not significantly differ when using spruce wood chips. For this comparison, it is shown that eutrophication potential also needs to be considered due to the fertilizer use in wheat cultivation.

CONCLUSIONS

The LCA points out the environmental hotspots in the ethanol production process, and thus provides input to the further development of the high-gravity technology. Reducing the number of impact categories based only on cross-correlations should be done with caution. Knowledge of the analyzed system provides further input to the choice of impact categories.

Preparation approach effect on polyurethane/montmorillonite nanocomposites characteristics

Segmented polyurethane/montmorillonite (MMT) nanocomposites have been obtained by solvent casting or in situ polymerization approaches using poly(tetramethyleneglycol), α,ω-dihydroxylated poly(2-alkyl-2-oxazoline), 4,4′-methylenebis-(phenyl isocyanate) and MMT. The influence of the preparation method on the characteristics of the resulted materials was studied by means of spectral and thermal analysis, X-ray diffraction, scanning electronic microscopy, and dynamic-mechanical analysis.

Linear polyethylenimine as (multi) functional initiator for organocatalytic l-lactide polymerization

The preparation of polyethylenimine (PEI)–polylactide (PLA) copolymer structures is promising as these materials may find use in gene and/or drug delivery applications.

Mild Brønsted acid initiated controlled polymerizations of 2-oxazoline towards one-pot synthesis of novel double-hydrophilic poly(2-ethyl-2-oxazoline)-block-poly(sarcosine)

Mild Brønsted acid initiator in polymerizations of 2-oxazoline was firstly reported as a workable protocol in the ROPs and BCPs.

Poly(2-oxazoline)-based nanogels as biocompatible pseudopolypeptide nanoparticles

Hydrophilic nanogels based on partially hydrolyzed poly(2-ethyl-2-oxazoline) were synthesized in dilute aqueous media in the presence of 1,6-hexanediol diglycidyl ether as a cross-linker. Nanogel formation was monitored by DLS and HSQC NMR spectroscopy, and the final nano-objects were characterized by DLS, TEM, AFM, and NanoSight analyses. Nanogels with a hydrodynamic radius of 78 nm exhibiting a slight positive surface charge were obtained. MTS assays (cell metabolic activity test) evidenced that nanogels were nontoxic in the investigated concentration range (i.e., 0.1 to 400 μg/mL) and that no specific interaction with bovine serum albumin was observed.

Surface functionalization of thin-film composite membranes with copper nanoparticles for antimicrobial surface properties

Biofouling is a major operational challenge in reverse osmosis (RO) desalination, motivating a search for improved biofouling control strategies. Copper, long known for its antibacterial activity and relatively low cost, is an attractive potential biocidal agent. In this paper, we present a method for loading copper nanoparticles (Cu-NPs) on the surface of a thin-film composite (TFC) polyamide RO membrane. Cu-NPs were synthesized using polyethyleneimine (PEI) as a capping agent, resulting in particles with an average radius of 34 nm and a copper content between 39 and 49 wt.%. The positive charge of the Cu-NPs imparted by the PEI allowed a simple electrostatic functionalization of the negatively charged RO membrane. We confirmed functionalization and irreversible binding of the Cu-NPs to the membrane surface with SEM and XPS after exposing the membrane to bath sonication. We also demonstrated that Cu-NP functionalization can be repeated after the Cu-NPs dissolve from the membrane surface. The Cu-NP functionalization had minimal impact on the intrinsic membrane transport parameters. Surface hydrophilicity and surface roughness were also maintained, and the membrane surface charge became positive after functionalization. The functionalized membrane exhibited significant antibacterial activity, leading to an 80-95% reduction in the number of attached live bacteria for three different model bacterial strains. Challenges associated with this functionalization method and its implementation in RO desalination are discussed.

Cationic Ring-Opening Polymerization of 2-Propyl-2-oxazolines: Understanding Structural Effects on Polymerization Behavior Based on Molecular Modeling

The surprising difference in the cationic ring-opening polymerization rate of 2-cyclopropyl-2-oxazoline versus 2-n-propyl-2-oxazoline and 2-isopropyl-2-oxazoline was investigated both experimentally and theoretically. The polymerization kinetics of all three oxazolines were experimentally measured in acetonitrile at 140 °C, and the polymerization rate constant (k_p) was found to decrease in the order c-PropOx > n-PropOx > i-PropOx. Theoretical free energy calculations confirmed the trend for k_p, and a set of DFT-based reactivity descriptors, electrostatics, and frontier molecular orbitals were studied to detect the factors controlling this peculiar behavior. Our results show that the observed reactivity is dictated by electrostatic effects. More in particular, the charge on the nitrogen atom of the monomer, used to measure its nucleophilicity, was the most negative for c-PropOx. Furthermore, the electrophilicity of the cations does not change substantially, and thus, the nucleophilicity of the monomers is the driving factor for k_p.

Coordination chemistry and applications of metal phenolates containing an oxazoline group

This review details the coordination chemistry aspects, applications, and catalytic relevance of materials containing a phenol unit appended to an oxazoline ring. The latter functionality can be chiral or achiral in nature. The binding motifs and catalytic potency of these materials in carbon-carbon bond forming processes and related reactions are compared and contrasted.

Oligobenzylethylenimine enriches linear polyethylenimine with a pH-sensitive membrane-disruptive property and leads to enhanced gene delivery activity

We report here the synthesis of a diblock linear polymer of oligo(benzylethylenimine)-b-polyethylenimine (OBzEI-PEI) and investigate its gene delivery properties. The linear copolymer OBzEI-PEI was prepared in a straightforward manner by acidic hydrolysis of a diblock polyoxazoline, which had been made by sequential polymerization of 4-benzyl-2-ethyl-2-oxazoline followed by 2-ethyl-2-oxazoline. pH titration and DNA complexation profiles of the new polymer are similar to regular linear PEIs, but with higher gene transfection efficiencies in various cell lines despite a decreased cellular uptake of plasmid DNA. Further experiments suggest that the OBzEI tail complements the intrinsic proton-sponge endosomolytic activities of PEI with an acid pH-sensitive membrane-perturbing activity.