Characterization of cellulose and cellulose derivatives in solution by high resolution 13C-NMR spectroscopy

Structural characterization of the extracellular stalk material of the diatom Didymosphenia geminata

The study represents new bioanalytical characterization of mainly organic components of the poorly investigated extracellular polymeric substances (EPS) of the enigmatic diatom Didymosphenia geminata, an invasive, worldwide expanding species endangering diverse ecosystems. This microalga attaches its siliceous cells to rocky substrates using fibrous stalks, which are made of an EPS-based matrix stabilized by crystalline calcite. The EPS were analyzed using selected methods, including microscopic, spectroscopic, and spectrometric techniques. We identified diverse types of biomolecules. The presence of lipids, condensed aromatics, and heteroaromatic compounds in the EPS has been confirmed using high-resolution mass spectrometry (HR-MS). Additionally, both sulfur-containing functionalities and carboxylic acids were determined too using infrared (IR) spectroscopy and nuclear magnetic resonance (NMR) spectroscopy. For the first time, lignin compounds have been detected as one of the components of the EPS of the D. geminata diatom, using HR-MS and fluorescence microscopy (FM) in combination with specific staining techniques. By increasing the understanding of the chemistry and structural features of the stalks, we aim to develop potential applications and methods for removing these stalks from affected regions in the future, or, alternatively, to use them as a large-scale source of sustainable biocomposite material.

Novel insights on room temperature-induced cellulose dissolution mechanism via ZnCl2 aqueous solution: Migration, penetration, interaction, and dispersion

The unique molecular structure of cellulose makes it challenging to dissolve at room temperature (R.T.), and the dissolution mechanism remains unclear. In this study, we employed ZnCl2 aqueous solution for cellulose dissolution at R.T., proposing a novel four-stage dissolution mechanism. The efficient dissolution of cellulose in ZnCl2 aqueous solution at R.T. involves four indispensable stages: rapid migration of hydrated Zn2+ ions towards cellulose, sufficient penetration between cellulose sheets, strong interaction with cellulose hydroxyl groups, and effective dispersion of separated cellulose chains. The proposed four-stage dissolution mechanism was validated through theoretical calculations and experimental evidence. The hydrated Zn2+ ions in ZnCl2 + 3.5H2O solvent exhibited ideal migration, penetration, interaction, and dispersion abilities, resulting in efficient cellulose dissolution at R.T. Moreover, only slight degradation of cellulose occurred in ZnCl2 + 3.5H2O at R.T. Consequently, the regenerated cellulose materials obtained from ZnCl2 + 3.5H2O (R.T.) exhibited better mechanical properties. Notably, the solvent recovery rate reached about 95 % based on previous usage during five cycles. The solvent is outstanding for its green, low-cost, efficiency, simplicity, R.T. conditions and recyclability. This work contributes to a better understanding of the cellulose dissolution mechanisms within inorganic salt solvents at R.T., thereby guiding future development efforts towards greener and more efficient cellulosic solvents.

Application of cellulose to chromatographic media: Cellulose dissolution, and media fabrication and derivatization

As the cornerstone of chromatographic technology, the development of high-performance chromatographic media is a crucial means to enhance the purification efficiency of biological macromolecules. Cellulose is a popular biological separation medium due to its abundant hydroxyl group on the surface, easy modification and, weak non-specific adsorption. In this paper, the development of cellulosic solvent systems, typical preparation methods of cellulosic chromatographic media, and the enhancement of chromatographic properties of cellulosic chromatographic media by polymeric ligand grafting strategies and their mechanism of action are reviewed. Ultimately, based on the current research status, a promising outlook for the preparation of high-performance cellulose-based chromatographic media was presented.

Fabrication and Properties of Tree-Branched Cellulose Nanofibers (CNFs) via Acid Hydrolysis Assisted with Pre-Disintegration Treatment

In this paper, the novel morphology of cellulose nanofibers (CNFs) with a unique tree-branched structure was discovered by using acid hydrolysis assisted with pre-disintegration treatment from wood pulps. For comparison, the pulps derived from both softwood and hardwood were utilized to extract nanocellulose in order to validate the feasibility of proposed material fabrication technique. The morphology, crystalline structures, chemical structures, and thermal stability of nanocellulose were characterized by means of transmission electron microscopy (TEM), X-ray diffraction (XRD) analysis, Fourier transform infrared spectroscopy (FTIR), as well as thermogravimetric analysis (TGA). Prior to acid hydrolysis, softwood and hardwood pulps underwent the disintegration treatment in the fiber dissociator. It has been found that nanocellulose derived from disintegrated pulps possesses much longer fiber length (approximately 5-6 μm) and more evident tree-branched structures along with lower degree of crystallinity when compared with those untreated counterparts. The maximum mass loss rate of CNFs takes place at the temperature level of approximately 225 °C, and appears to be higher than that of cellulose nanowhiskers (CNWs), which might be attributed to an induced impact of amorphous content. On the other hand, disintegration treatment is quite beneficial to the enhancement of tensile strength of nanocellulose films. This study elaborates a new route of material fabrication toward the development of well-tailored tree-branched CNFs in order to broaden the potential widespread applications of nanocellulose with diverse morphological structures.

Synthesis and Performance of a Novel Cotton Linter Based Cellulose Derivatives Dispersant for Coal–Water Slurries

A novel sulfonic-cellulose succinate half ester (S-CSHE) dispersant for coal–water slurry (CWS) was successfully synthesized using cotton linters, sulfamic acid and succinic anhydride in DMF by a one-pot synthesis. The effects of the synthetic condition of S-CSHE as a dispersant for CWS were studied. An S-CSHE with a maximum degree of substitution of 0.98 was obtained under these optimized conditions. The synthesized samples were characterized by GPC, FT-IR spectroscopy, ¹³C-NMR, and SEM. The molecular weight was from 2.2 × 10³ to 1.2 × 10⁴, revealed by GPC; FT-IR spectra analysis revealed characteristic absorptions of the sulfonic-cellulose succinate half ester; SEM images showed smooth cellulose structures, while the S-CSHE had a compact surface. Effects of S-CSHE on the fluidity of application as the dispersants for the CWS prepared from Chinese Zhundong coal were studied further. The CWS application performance investigations showed that S-CSHE can most effectively reduce CWS viscosity, and perform excellent dispersity and stability. When the dosage of S-CSHE was up to 0.5 wt.%, the maximum coal content of CWS may reach 70 wt.%, and the apparent viscosity of CWS was 487 mPa·s. The CWS prepared using S-CSHE (0.38 wt.%) for Zhundong coal showed the rheological characteristics of shear-thinning, and is consistent with the Herschel–Bulkley model. This work found a new route for utilizing cotton linters cellulose and enlarged the selecting range of the dispersant for CWS. It has a positive significance for efficient and clean utilization of Xinjiang Zhundong coal.

An insight into microscopy and analytical techniques for morphological, structural, chemical, and thermal characterization of cellulose

Cellulose obtained from plants is a bio-polysaccharide and the most abundant organic polymer on earth that has immense household and industrial applications. Hence, the characterization of cellulose is important for determining its appropriate applications. In this article, we review the characterization of cellulose morphology, surface topography using microscopic techniques including optical microscopy, transmission electron microscopy, scanning electron microscopy, and atomic force microscopy. Other physicochemical characteristics like crystallinity, chemical composition, and thermal properties are studied using techniques including X-ray diffraction, Fourier transform infrared, Raman spectroscopy, nuclear magnetic resonance, differential scanning calorimetry, and thermogravimetric analysis. This review may contribute to the development of using cellulose as a low-cost raw material with anticipated physicochemical properties. HIGHLIGHTS: Morphology and surface topography of cellulose structure is characterized using microscopy techniques including optical microscopy, transmission electron microscopy, scanning electron microscopy, and atomic force microscopy. Analytical techniques used for physicochemical characterization of cellulose include X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, nuclear magnetic resonance spectroscopy, differential scanning calorimetry, and thermogravimetric analysis.

Distribution and Quantification of Diverse Functional Groups on Phosphorylated Nanocellulose Surfaces

Phosphorylated cellulose nanofiber (CNF) is attracting attention as a newly emerged CNF with high functionality. However, many structural aspects of phosphorylated CNF remain unclear. In this study, we investigated the chemical structures and distribution of ionic functional groups on the phosphorylated CNF surfaces via liquid-state nuclear magnetic resonance measurements of colloidal dispersion. In addition to the monophosphate group, polyphosphate groups and cross-linked phosphate groups were introduced in the phosphorylated CNFs. The proportion of polyphosphate groups increased as the phosphorylation time increased, reaching ∼30% of all phosphate groups. Only a small amount of cross-linked phosphate groups existed in the phosphorylated CNF after a prolonged reaction time. Furthermore, phosphorylation of cellulose using urea and phosphoric acid was found to be regioselective at the C2 and C6 positions. There existed no significant difference between the surface degrees of substitution at the C2 and C6 positions of the phosphorylated CNFs.

Characterization of polysaccharide structure in Citrus reticulate 'Chachi' peel during storage and their bioactivity

The peel of Citrus reticulate 'Chachiennsis' (Chachi) is widely accepted as a functional food. It is generally recognized that its health benefits are dependent on storage time. However, the chemicals responsible for this phenomonon remain unclear. As bioactive polysaccharides are dominant in Chachi, Chachi polysaccharides with various storage times (5-20 years) were prepared. The monosaccharide composition was analyzed by GC-MS. NMR data revealed that Chachi polysaccharides were mainly consisted of arabinogalacturonan and another pectin with side chain of →4)-β-D-Galp-(1 → . α-L-Araf-(1→, →5)-α-L-Araf-(1→, →4)-α-D-GalpA-(1→, →4)-α-D-GalpAMe-(1→, →4)-β-D-Galp-(1→ and →4)-β-D-Glcp-(1→ were detected. The molecular weight of Chachi polysaccharides decreased along with the extension of storage time. However, the basic structure characteristics remained stable. The immumomodulatory activities of Chachi polysaccharides were improved as the storage time extended. The change of molecular weight was responsible for the improved immunomodulatory activity. The results explained how polysaccharides contributed to the enhanced health benefits of Chachi during storage.

Hydrogel from all in all lignocellulosic sisal fibers macromolecular components

The heterogeneous structure of lignocellulosic biomass makes it difficult to dissolve its main components (cellulose, hemicelluloses, and lignin) by solvent action with the aim of further applying the mixture of the biological macromolecules generated in the solvent medium. In the present study, the dissolution efficiency (DE) of lignocellulosic sisal fibers in the lithium chloride/dimethylacetamide solvent system (LiCl/DMAc) was evaluated for further application in the formation of hydrogels. Catalytic amounts of trifluoroacetic acid (TFA) were used in some experiments, which increased the DE from 40% to 90%. The regeneration of the solutions, either previously filtered or not, led to hydrogels based on sisal lignocellulosic biomass. In brief, the properties of the hydrogels were influenced by the content of the lignocellulosic components in the hydrogels, present both in the dissolved fraction and in the incorporated undissolved fraction (when nonfiltered solutions were used). Hydrogels presented water absorption up to 7479% and resorption content in the lyophilized hydrogel up to 2133%. Extracts obtained from preselected hydrogels exhibited cell viability up to 127% compared to the control group when in contact with fibroblast cultures, exhibiting their noncytotoxic properties. This attribute increased the range of possible applications of these hydrogels, ranging from agriculture to biocompatible materials.

Cellulose-based polymers

The presented chapter deals with structure, morphology, and properties aspects concerning cellulose-based polymers in both research and industrial production, such as cellulose fibers, cellulose membranes, cellulose nanocrystals, and bacterial cellulose, etc. The idea was to highlight the main cellulose-based polymers and cellulose derivatives, as well as the dissolution technologies in processing cellulose-based products. The structure and properties of cellulose are introduced briefly. The main attention has been paid to swelling and dissolution of cellulose in order to yield various kinds of cellulose derivatives through polymerization. The main mechanisms and methods are also presented. Finally, the environmental friendly and green cellulose-based polymers will be evaluated as one of the multifunctional and smart materials with significant progress.

Thermal stability of cellulose insulation in electrical power transformers - A review

Cellulosic pulp has been processed into insulation paper since the earliest days of electrical engineering. This polymer synthetized by nature has proved to be competitive to man-made plastics throughout the last century and is still widely used in electrical power transformers. The high working temperatures prevailing in such apparatuses and the desired lifespans of up to 40 years shifted the thermal stability of cellulose to the center of attention of many researchers. In this literature review, a summary of theories and recent insights regarding the processes upon thermal degradation of cellulose in the temperature range relevant for electrical power transformers is given, followed by an overview of strategies to improve the thermal stability of cellulosic insulators. Special emphasis is placed on the discussion of additives and modification agents and their action modes, and on the understanding how successful upgrading of cellulose towards high thermal stability is achieved.

Preparation of alpha cellulose from sugarcane bagasse and its cationization: Synthesis, characterization, validation and application as wet-end additive

Paper industry uses cationic polymers for imparting strong bonds with pulp furnish to enhance strength properties. Due to environmental reasons, emphasis is on utilization of biobased polymers in place of synthetic. Sugarcane bagasse, an agro-industrial waste, was processed for extraction of alpha cellulose and preparation of cationic derivative. Reaction conditions were optimized to achieve highly substituted cationic derivative with insertion of 2-hydroxy-3-(trimethylammonium) propyl group. Artificial neural network (ANN) was applied to analyze the experimental data for cationization modeling. Maximum degree of substitution 0.66, was achieved at 5.0 M NaOH/anhydro glucose unit (AGU), 20 °C alkalization temperature, 8 min alkalization time, 3.5 M/AGU etherification agent concentration, 45 min time and 60 °C etherification reaction temperature. The experimental results showed that mean square error values for input parameters were significantly low. The ANN based regression values of the output, and computed values of target were close to unity. ANN based fitting indicates better performance level to predict the degree of substitution. The synthesized cationic cellulose was characterized through FTIR, XRD, NMR, FESEM and TGA. The activity of cationized cellulose as wet-end additive was tested for bagasse, wheat straw and recycled pulps due to their shorten fiber and feeble pulp characters than wood pulp.

High value-added products from the orange juice industry waste

An underutilized residue called Citrus Pulp of Floater (CPF), which causes problems during the industrial process of manufacturing of orange juice, was explored for the production of high value-added products. Mixed, first (1G) and second generation (2G) ethanol, a clean and renewable biofuel, was obtained after an enzyme cocktail isolated from the Xanthomonas axonopodis pv. citri (Xac) was applied in hydrolysis of this biomass. Then, mono- and co-culture fermentations were performed using the yeast Saccharomyces cerevisiae and two Candida strains (Candida parapsilosis IFM 48375 and NRRL Y-12969), where the last two were isolated from the orange bagasse in natura. After the enzymatic hydrolysis step, sugars obtained were converted to ethanol achieving a yield of almost 100% after co-fermentation. Hesperidin, a flavonoid widely used for its antimicrobial and/or antioxidant activities, was also extracted from CPF by liquid-solid extraction and precipitation, with the yield of 1.2% and 92.6% pure. Finally, nanocellulose was produced through processes such as extraction, bleaching and nanonization with the yield of 1.4% and over 98% of purity. These products - ethanol, hesperidin and nanocellulose were obtained from three independent processes: (1) after an enzyme-based hydrolysis of CPF, liquid part was used for ethanol production, and solid was preserved; (2) hesperidin was isolated from a dry CPF, and solid residue was preserved; and (3) nanocellulose was obtained from the solid residues after processes cited in 1 and 2.

Synthesis of inulin derivatives with quaternary phosphonium salts and their antifungal activity

Inulin is a kind of renewable and biodegradable carbohydrate with good water solubility and numerous physiological functions. For further utilization of inulin, chemical modification can be applied to improve its bioactivities. In this paper, five novel inulin derivatives were synthesized via chemical modification with quaternary phosphonium salt. Their antifungal activity against three kinds of plant pathogens including Colletotrichum lagenarium, Phomopsis asparagi, and Fusarium oxysporum was assessed with radial growth assay in vitro. Results revealed that all the inulin derivatives exhibited improved antifungal activity compared with inulin. Particularly, inulin modified with triphenylphosphine (TPhPAIL) exhibited the best antifungal activity with inhibitory indices of 80.0%, 78.8%, and 87.4% against Colletotrichum lagenarium, Phomopsis asparagi, and Fusarium oxysporum at 1.0mg/mL respectively. The results clearly showed that chemical modification of inulin with quaternary phosphonium salt could efficiently improve derivatives' antifungal activity. Further analysis of results indicated that the antifungal activity was influenced by alkyl chain length or electron-withdrawing ability of the grafted quaternary phosphonium salts. Longer alkyl chain lengths or the stronger electron-withdrawing groups would lead to enhanced antifungal efficacy.

Chemical structure analysis of starch and cellulose derivatives

Starch and cellulose are the most abundant and important representatives of renewable biomass. Since the mid-19th century their properties have been changed by chemical modification for commercial and scientific purposes, and there substituted polymers have found a wide range of applications. However, the inherent polydispersity and supramolecular organization of starch and cellulose cause the products resulting from their modification to display high complexity. Chemical composition analysis of these mixtures is therefore a challenging task. Detailed knowledge on substitution patterns is fundamental for understanding structure-property relationships in modified cellulose and starch, and thus also for the improvement of reproducibility and rational design of properties. Substitution patterns resulting from kinetically or thermodynamically controlled reactions show certain preferences for the three available hydroxyl functions in (1→4)-linked glucans. Spurlin, seventy years ago, was the first to describe this in an idealized model, and nowadays this model has been extended and related to the next hierarchical levels, namely, the substituent distribution in and over the polymer chains. This structural complexity, with its implications for data interpretation, and the analytical approaches developed for its investigation are outlined in this article. Strategies and methods for the determination of the average degree of substitution (DS), monomer composition, and substitution patterns at the polymer level are presented and discussed with respect to their limitations and interpretability. Nuclear magnetic resonance spectroscopy, chromatography, capillary electrophoresis, and modern mass spectrometry (MS), including tandem MS, are the main instrumental techniques employed, in combination with appropriate sample preparation by chemical and enzymatic methods.

Synthesis of novel celluloses derivatives and investigation of their mitogenic activity in the presence and absence of FGF2

Novel cellulose sulfates (CS) with a controlled degree of sulfation (DS(S)) were synthesized through acetosulfation as well as direct sulfation. CS containing carboxyl (CO) or carboxymethyl (CM) groups were prepared by TEMPO oxidation or by carboxymethylation with chloroacetic acid. The derivatization was characterized by nuclear magnetic resonance and Raman spectroscopy. The derivatives were investigated regarding their cytotoxicity and mitogenic activity by modulation of 3T3 fibroblast proliferation with or without exogenous FGF2. All derivatives were non-toxic for 3T3 cells. CS strongly promoted FGF2-induced proliferation, which was positively related to overall DS(S). In the absence of FGF2, minute quantities of CS with intermediate degrees of sulfation exerted stronger mitogenic effects than heparin. No significant promoting effects of CO and CM on cell proliferation were found, though the structure of CO shows similarities to heparin.

Variation of polyelectrolyte film stiffness by photo-cross-linking: a new way to control cell adhesion

We report on the preparation of polyelectrolyte films based on biopolymers whose nanomechanical properties can be tuned by photo-cross-linking. Cationic poly(L-lysine) was layer-by-layer assembled with anionic hyaluronan (HA) derivatives modified by photoreactive vinylbenzyl (VB) groups. The study of the multilayer buildup by quartz crystal microbalance with dissipation monitoring showed that the presence of VB groups does not influence significantly the multilayer growth. Then the VB-modified HA incorporated into the films was cross-linked upon UV irradiation. UV spectroscopy measurements showed that the cross-linking rate of the multilayers increases with the amount of VB groups grafted onto HA chains. Force measurements performed by atomic force microscopy with a colloidal probe proved that the rigidity of the cross-linked films increases with the grafting degree of HA chains and consequently the number of cross-links. Cell culture assays performed on non-cross-linked and photo-cross-linked films with myoblast cells demonstrated that cell adhesion and proliferation are considerably improved with increasing film rigidity.

Preparation and anticoagulation activity of sodium cellulose sulfate

Semi-synthesis of cellulose sulfate sodium (Na-MCS) was carried out by sulfation of microcrystalline cellulose (MCC) with chlorosulfonic acid-dimethylformamide complex as sulfating agent. As shown by FT-IR, NMR spectroscopy, and elemental analysis, the sulfation occurred mainly at C6, partially at C2, and no substitution at C3. The substitution degree ranged from 1.10 to 1.70 and the average molecular weight is between 1.1 and 3.5 x 10(4)Da. The anticoagulant efficacy and its possible mechanism were investigated using in vitro, in vivo coagulation assays and amidolytic tests in comparison with heparin. Results indicated that Na-MCS exhibited higher anticoagulation activity based on activated partial thromboplastin time (APTT) assay and prolonged the thrombin time (TT) to a lesser extent than heparin. No effect was detected on the prothrombin time (PT). Subcutaneous administration of Na-MCS to mice increased the clotting time (CT) in a moderate dose-dependent manner with a longer duration. Na-MCS exhibited anticoagulation activity mainly by accelerating the inhibition of antithrombin III (AT-III) on coagulation factors FIIa and FXa in plasma.

Hydrogen-bond-induced inclusion complex in aqueous cellulose/LiOH/urea solution at low temperature

It was puzzling that cellulose could be dissolved rapidly in 4.6 wt % LiOH/15 wt % urea aqueous solution precooled to -12 degrees C, whereas it could not be dissolved in the same solvent without prior cooling. To clarify this important phenomenon, the structure and physical properties of LiOH and urea in water as well as of cellulose in the aqueous LiOH/urea solution at different temperatures were investigated by means of laser light scattering, 13C NMR spectroscopy, differential scanning calorimetry, Fourier transform infrared spectroscopy, wide-angle X-ray diffraction, and transmission electron microscopy (TEM). The results reveal that a hydrogen-bonded network structure between LiOH, urea, and water can occur, and that it becomes more stable with decreasing temperature. The LiOH hydrates cleave the chain packing of cellulose through the formation of new hydrogen bonds at low temperatures, which result in a relatively stable complex associated with LiOH, water clusters, and cellulose. A channel inclusion complex (IC) hosted by urea could encage the cellulose macromolecule in LiOH/urea solution with prior cooling and therefore provide a rationale for forming a good dispersion of cellulose. TEM observations, for the first time, showed the channel IC in dry form. The low-temperature step played an important role in shifting hydrogen bonds between cellulose and small molecules, leading to the dissolution of macromolecules in the aqueous solution.

Direct dissolution of cellulose in NaOH/thiourea/urea aqueous solution

Untreated cellulose was directly and quickly dissolved in NaOH/thiourea/urea aqueous solution. The mechanism of dissolution was investigated by SEM, WXRD and (13)C NMR. The components of this solvent cannot dissolve cellulose on their own, and the interactions between NaOH and urea, as well as between NaOH and thiourea, play an important role in improving the dissolution of cellulose. Moreover, (13)C NMR spectra proved that NaOH, thiourea, and urea were bound to cellulose molecules, which brings cellulose molecules into aqueous solution to a certain extent and prevents cellulose macromolecules from associating. (13)C NMR spectra of the cellulose solution show that this novel mixture is a direct solvent. Optical microscopy and CP MAS (13)C NMR were used to study the process of dissolution. The results reveal that cellulose is dissolved completely and that cellulose I (cotton linter) first changes to amorphous cellulose chains in solution, and then to cellulose II during regeneration. Moreover, a new, more effective dissolution method is proposed, as confirmed by dynamic rheology measurements.

Rapid dissolution of cellulose in LiOH/urea and NaOH/urea aqueous solutions

Rapid dissolution of cellulose in LiOH/urea and NaOH/urea aqueous solutions was studied systematically. The dissolution behavior and solubility of cellulose were evaluated by using (13)C NMR, optical microscopy, wide-angle X-ray diffraction (WAXD), FT-IR spectroscopy, DSC, and viscometry. The experiment results revealed that cellulose having viscosity-average molecular weight ((overline) M eta) of 11.4 x 104 and 37.2 x 104 could be dissolved, respectively, in 7% NaOH/12% urea and 4.2% LiOH/12% urea aqueous solutions pre-cooled to -10 degrees C within 2 min, whereas all of them could not be dissolved in KOH/urea aqueous solution. The dissolution power of the solvent systems was in the order of LiOH/urea > NaOH/urea >> KOH/urea aqueous solution. The results from DSC and (13)C NMR indicated that LiOH/urea and NaOH/urea aqueous solutions as non-derivatizing solvents broke the intra- and inter-molecular hydrogen bonding of cellulose and prevented the approach toward each other of the cellulose molecules, leading to the good dispersion of cellulose to form an actual solution.

Cellulose—model films and the fundamental approach

This critical review describes the recent arrival of ultrathin films of cellulose. The methodology of preparation as well as the applications of the films for fundamental research is fully covered. The review places cellulose in a wider scientific context where cellulose research is no longer a field of interest for specialised scientists only. Cellulose and cellulosic materials should interest communities such as biochemists, physical chemists, surface chemists, organic chemists, polymer chemists and also physicists working close the disciplines mentioned. (149 references.).