Protein facilitation of group I intron splicing by assembly of the catalytic core and the 5' splice site domain

Protein cofactors and substrate influence Mg2+-dependent structural changes in the catalytic RNA of archaeal RNase P

The ribonucleoprotein (RNP) form of archaeal RNase P comprises one catalytic RNA and five protein cofactors. To catalyze Mg²⁺-dependent cleavage of the 5′ leader from pre-tRNAs, the catalytic (C) and specificity (S) domains of the RNase P RNA (RPR) cooperate to recognize different parts of the pre-tRNA. While ∼250–500 mM Mg²⁺ renders the archaeal RPR active without RNase P proteins (RPPs), addition of all RPPs lowers the Mg²⁺ requirement to ∼10–20 mM and improves the rate and fidelity of cleavage. To understand the Mg²⁺- and RPP-dependent structural changes that increase activity, we used pre-tRNA cleavage and ensemble FRET assays to characterize inter-domain interactions in Pyrococcus furiosus (Pfu) RPR, either alone or with RPPs ± pre-tRNA. Following splint ligation to doubly label the RPR (Cy3-RPR_{C domain} and Cy5-RPR_{S domain}), we used native mass spectrometry to verify the final product. We found that FRET correlates closely with activity, the Pfu RPR and RNase P holoenzyme (RPR + 5 RPPs) traverse different Mg²⁺-dependent paths to converge on similar functional states, and binding of the pre-tRNA by the holoenzyme influences Mg²⁺ cooperativity. Our findings highlight how Mg²⁺ and proteins in multi-subunit RNPs together favor RNA conformations in a dynamic ensemble for functional gains.

Analysis of small and large subunit rDNA introns from several ectomycorrhizal fungi species

The small (18S) and large (28S) nuclear ribosomal DNA (rDNA) introns have been researched and sequenced in a variety of ectomycorrhizal fungal taxa in this study, it is found that both 18S and 28S rDNA would contain introns and display some degree variation in size, nucleotide sequences and insertion positions within the same fungi species (Meliniomyces). Under investigations among the tested isolates, 18S rDNA has four sites for intron insertions, 28S rDNA has two sites for intron insertions. Both 18S and 28S rDNA introns among the tested isolates belong to group I introns with a set of secondary structure elements designated P1-P10 helics and loops. We found a 12 nt nucleotide sequences TACCACAGGGAT at site 2 in the 3'-end of 28S rDNA, site 2 introns just insert the upstream or the downstream of the12 nt nucleotide sequences. Afters sequence analysis of all 18S and 28S rDNA introns from tested isolates, three high conserved regions around 30 nt nucleotides (conserved 1, conserved 2, conserved 3) and identical nucleotides can be found. Conserved 1, conserved 2 and conserved 3 regions have high GC content, GC percentage is almost more than 60%. From our results, it seems that the more convenient host sites, intron sequences and secondary structures, or isolates for 18S and 28S rDNA intron insertion and deletion, the more popular they are. No matter 18S rDNA introns or 18S rDNA introns among tested isolates, complementary base pairing at the splicing sites in P1-IGS-P10 tertiary helix around 5'-end introns and exons were weak.

Trans-splicing with the group I intron ribozyme from Azoarcus

Group I introns are ribozymes (catalytic RNAs) that excise themselves from RNA primary transcripts by catalyzing two successive transesterification reactions. These cis-splicing ribozymes can be converted into trans-splicing ribozymes, which can modify the sequence of a separate substrate RNA, both in vitro and in vivo. Previous work on trans-splicing ribozymes has mostly focused on the 16S rRNA group I intron ribozyme from Tetrahymena thermophila. Here, we test the trans-splicing potential of the tRNA(Ile) group I intron ribozyme from the bacterium Azoarcus. This ribozyme is only half the size of the Tetrahymena ribozyme and folds faster into its active conformation in vitro. Our results showed that in vitro, the Azoarcus and Tetrahymena ribozymes favored the same set of splice sites on a substrate RNA. Both ribozymes showed the same trans-splicing efficiency when containing their individually optimized 5' terminus. In contrast to the previously optimized 5'-terminal design of the Tetrahymena ribozyme, the Azoarcus ribozyme was most efficient with a trans-splicing design that resembled the secondary structure context of the natural cis-splicing Azoarcus ribozyme, which includes base-pairing between the substrate 5' portion and the ribozyme 3' exon. These results suggested preferred trans-splicing interactions for the Azoarcus ribozyme under near-physiological in vitro conditions. Despite the high activity in vitro, however, the splicing efficiency of the Azoarcus ribozyme in Escherichia coli cells was significantly below that of the Tetrahymena ribozyme.

Mss116p: a DEAD-box protein facilitates RNA folding

RNA folding is an essential aspect underlying RNA-mediated cellular processes. Many RNAs, including large, multi-domain ribozymes, are capable of folding to the native, functional state without assistance of a protein cofactor in vitro. In the cell, trans-acting factors, such as proteins, are however known to modulate the structure and thus the fate of an RNA. DEAD-box proteins, including Mss116p, were recently found to assist folding of group I and group II introns in vitro and in vivo. The underlying mechanism(s) have been studied extensively to explore the contribution of ATP hydrolysis and duplex unwinding in helicase-stimulated intron splicing. Here we summarize the ongoing efforts to understand the novel role of DEAD-box proteins in RNA folding.

RNA folding pathways and the self-assembly of ribosomes

Many RNAs do not directly code proteins but are nonetheless indispensable to cellular function. These strands fold into intricate three-dimensional shapes that are essential structures in protein synthesis, splicing, and many other processes of gene regulation and expression. A variety of biophysical and biochemical methods are now showing, in real time, how ribosomal subunits and other ribonucleoprotein complexes assemble from their molecular components. Footprinting methods are particularly useful for studying the folding of long RNAs: they provide quantitative information about the conformational state of each residue and require little material. Data from footprinting complement the global information available from small-angle X-ray scattering or cryo-electron microscopy, as well as the dynamic information derived from single-molecule Förster resonance energy transfer (FRET) and NMR methods. In this Account, I discuss how we have used hydroxyl radical footprinting and other experimental methods to study pathways of RNA folding and 30S ribosome assembly. Hydroxyl radical footprinting probes the solvent accessibility of the RNA backbone at each residue in as little as 10 ms, providing detailed views of RNA folding pathways in real time. In conjunction with other methods such as solution scattering and single-molecule FRET, time-resolved footprinting of ribozymes showed that stable domains of RNA tertiary structure fold in less than 1 s. However, the free energy landscapes for RNA folding are rugged, and individual molecules kinetically partition into folding pathways that lead through metastable intermediates, stalling the folding or assembly process. Time-resolved footprinting was used to follow the formation of tertiary structure and protein interactions in the 16S ribosomal RNA (rRNA) during the assembly of 30S ribosomes. As previously observed in much simpler ribozymes, assembly occurs in stages, with individual molecules taking different routes to the final complex. Interactions occur concurrently in all domains of the 16S rRNA, and multistage protection of binding sites of individual proteins suggests that initial encounter complexes between the rRNA and ribosomal proteins are remodeled during assembly. Equilibrium footprinting experiments showed that one primary binding protein was sufficient to stabilize the tertiary structure of the entire 16S 5'-domain. The rich detail available from the footprinting data showed that the secondary assembly protein S16 suppresses non-native structures in the 16S 5'-domain. In doing so, S16 enables a conformational switch distant from its own binding site, which may play a role in establishing interactions with other domains of the 30S subunit. Together, the footprinting results show how protein-induced changes in RNA structure are communicated over long distances, ensuring cooperative assembly of even very large RNA-protein complexes such as the ribosome.

The Mrs1 splicing factor binds the bI3 group I intron at each of two tetraloop-receptor motifs

Most large ribozymes require protein cofactors in order to function efficiently. The yeast mitochondrial bI3 group I intron requires two proteins for efficient splicing, Mrs1 and the bI3 maturase. Mrs1 has evolved from DNA junction resolvases to function as an RNA cofactor for at least two group I introns; however, the RNA binding site and the mechanism by which Mrs1 facilitates splicing were unknown. Here we use high-throughput RNA structure analysis to show that Mrs1 binds a ubiquitous RNA tertiary structure motif, the GNRA tetraloop-receptor interaction, at two sites in the bI3 RNA. Mrs1 also interacts at similar tetraloop-receptor elements, as well as other structures, in the self-folding Azoarcus group I intron and in the RNase P enzyme. Thus, Mrs1 recognizes general features found in the tetraloop-receptor motif. Identification of the two Mrs1 binding sites now makes it possible to create a model of the complete six-component bI3 ribonucleoprotein. All protein cofactors bind at the periphery of the RNA such that every long-range RNA tertiary interaction is stabilized by protein binding, involving either Mrs1 or the bI3 maturase. This work emphasizes the strong evolutionary pressure to bolster RNA tertiary structure with RNA-binding interactions as seen in the ribosome, spliceosome, and other large RNA machines.

Domain-elongation NMR spectroscopy yields new insights into RNA dynamics and adaptive recognition

By simplifying the interpretation of nuclear magnetic resonance spin relaxation and residual dipolar couplings data, recent developments involving the elongation of RNA helices are providing new atomic insights into the dynamical properties that allow RNA structures to change functionally and adaptively. Domain elongation, in concert with spin relaxation measurements, has allowed the detailed characterization of a hierarchical network of local and collective motional modes occurring at nanosecond timescale that mirror the structural rearrangements that take place following adaptive recognition. The combination of domain elongation with residual dipolar coupling measurements has allowed the experimental three-dimensional visualization of very large amplitude rigid-body helix motions in HIV-1 transactivation response element (TAR) that trace out a highly choreographed trajectory in which the helices twist and bend in a correlated manner. The dynamic trajectory allows unbound TAR to sample many of its ligand bound conformations, indicating that adaptive recognition occurs by "conformational selection" rather than "induced fit." These studies suggest that intrinsic flexibility plays essential roles directing RNA conformational changes along specific pathways.

Global stabilization of rRNA structure by ribosomal proteins S4, S17, and S20

Ribosomal proteins stabilize the folded structure of the ribosomal RNA and enable the recruitment of further proteins to the complex. Quantitative hydroxyl radical footprinting was used to measure the extent to which three different primary assembly proteins, S4, S17, and S20, stabilize the three-dimensional structure of the Escherichia coli 16S 5' domain. The stability of the complexes was perturbed by varying the concentration of MgCl(2). Each protein influences the stability of the ribosomal RNA tertiary interactions beyond its immediate binding site. S4 and S17 stabilize the entire 5' domain, while S20 has a more local effect. Multistage folding of individual helices within the 5' domain shows that each protein stabilizes a different ensemble of structural intermediates that include nonnative interactions at low Mg(2+) concentration. We propose that the combined interactions of S4, S17, and S20 with different helical junctions bias the free-energy landscape toward a few RNA conformations that are competent to add the secondary assembly protein S16 in the next step of assembly.

Toward predicting self-splicing and protein-facilitated splicing of group I introns

In the current era of massive discoveries of noncoding RNAs within genomes, being able to infer a function from a nucleotide sequence is of paramount interest. Although studies of individual group I introns have identified self-splicing and nonself-splicing examples, there is no overall understanding of the prevalence of self-splicing or the factors that determine it among the >2300 group I introns sequenced to date. Here, the self-splicing activities of 12 group I introns from various organisms were assayed under six reaction conditions that had been shown previously to promote RNA catalysis for different RNAs. Besides revealing that assessing self-splicing under only one condition can be misleading, this survey emphasizes that in vitro self-splicing efficiency is correlated with the GC content of the intron (>35% GC was generally conductive to self-splicing), and with the ability of the introns to form particular tertiary interactions. Addition of the Neurospora crassa CYT-18 protein activated splicing of two nonself-splicing introns, but inhibited the second step of self-splicing for two others. Together, correlations between sequence, predicted structure and splicing begin to establish rules that should facilitate our ability to predict the self-splicing activity of any group I intron from its sequence.

A shared RNA-binding site in the Pet54 protein is required for translational activation and group I intron splicing in yeast mitochondria

The Pet54p protein is an archetypical example of a dual functioning ('moonlighting') protein: it is required for translational activation of the COX3 mRNA and splicing of the aI5beta group I intron in the COX1 pre-mRNA in Saccharomyces cerevisiae mitochondria (mt). Genetic and biochemical analyses in yeast are consistent with Pet54p forming a complex with other translational activators that, in an unknown way, associates with the 5' untranslated leader (UTL) of COX3 mRNA. Likewise, genetic analysis suggests that Pet54p along with another distinct set of proteins facilitate splicing of the aI5beta intron, but the function of Pet54 is, also, obscure. In particular, it remains unknown whether Pet54p is a primary RNA-binding protein that specifically recognizes the 5' UTL and intron RNAs or whether its functional specificity is governed in other ways. Using recombinant protein, we show that Pet54p binds with high specificity and affinity to the aI5beta intron and facilitates exon ligation in vitro. In addition, Pet54p binds with similar affinity to the COX3 5' UTL RNA. Competition experiments show that the COX3 5'UTL and aI5beta intron RNAs bind to the same or overlapping surface on Pet54p. Delineation of the Pet54p-binding sites by RNA deletions and RNase footprinting show that Pet54p binds across a similar length sequence in both RNAs. Alignment of the sequences shows significant (56%) similarity and overlap between the binding sites. Given that its role in splicing is likely an acquired function, these data support a model in which Pet54p's splicing function may have resulted from a fortuitous association with the aI5beta intron. This association may have lead to the selection of Pet54p variants that increased the efficiency of aI5beta splicing and provided a possible means to coregulate COX1 and COX3 expression.

Evidence that binding of C5 protein to P RNA enhances ribozyme catalysis by influencing active site metal ion affinity

The RNA subunit (P RNA) of the bacterial RNase P ribonucleoprotein is a ribozyme that catalyzes the Mg-dependent hydrolysis of pre-tRNA, but it requires an essential protein cofactor (P protein) in vivo that enhances substrate binding affinities and catalytic rates in a substrate dependent manner. Previous studies of Bacillus subtilis RNase P, containing a Type B RNA subunit, showed that its cognate protein subunit increases the affinity of metal ions important for catalysis, but the functional role of these ions is unknown. Here, we demonstrate that the Mg2+ dependence of the catalytic step for Escherichia coli RNase P, which contains a more common Type A RNA subunit, is also modulated by its cognate protein subunit (C5), indicating that this property is fundamental to P protein. To monitor specifically the binding of active site metal ions, we analyzed quantitatively the rescue by Cd2+ of an inhibitory Rp phosphorothioate modification at the pre-tRNA cleavage site. The results show that binding of C5 protein increases the apparent affinity of the rescuing Cd2+, providing evidence that C5 protein enhances metal ion affinity in the active site, and thus is likely to contribute significantly to rate enhancement at physiological metal ion concentrations.

Unusual metal specificity and structure of the group I ribozyme from Chlamydomonas reinhardtii 23S rRNA

Group I intron ribozymes require cations for folding and catalysis, and the current literature indicates that a number of cations can promote folding, but only Mg2+ and Mn2+ support both processes. However, some group I introns are active only with Mg2+, e.g. three of the five group I introns in Chlamydomonas reinhardtii. We have investigated one of these ribozymes, an intron from the 23S LSU rRNA gene of Chlamydomonas reinhardtii (Cr.LSU), by determining if the inhibition by Mn2+ involves catalysis, folding, or both. Kinetic analysis of guanosine-dependent cleavage by a Cr.LSU ribozyme, 23S.5 Delta Gb, that lacks the 3' exon and intron-terminal G shows that Mn2+ does not affect guanosine binding or catalysis, but instead promotes misfolding of the ribozyme. Surprisingly, ribozyme misfolding induced by Mn2+ is highly cooperative, with a Hill coefficient larger than that of native folding induced by Mg2+. At lower Mn2+ concentrations, metal inhibition is largely alleviated by the guanosine cosubstrate (GMP). The concentration dependence of guanosine cosubstrate-induced folding suggests that it functions by interacting with the G binding site, perhaps by displacing an inhibitory Mn2+. Because of these and other properties of Cr.LSU, the tertiary structure of the intron from 23S.5 Delta Gb was examined using Fe2+-EDTA cleavage. The ground-state structure shows evidence of an unusually open ribozyme core: the catalytic P3-P7 domain and the nucleotides that connect it to the P4-P5-P6 domain are exposed to solvent. The implications of this structure for the in vitro and in vivo properties of this intron ribozyme are discussed.

Two distinct binding modes of a protein cofactor with its target RNA

Like most cellular RNA enzymes, the bI5 group I intron requires binding by a protein cofactor to fold correctly. Here, we use single-molecule approaches to monitor the structural dynamics of the bI5 RNA in real time as it assembles with its CBP2 protein cofactor. These experiments show that CBP2 binds to the target RNA in two distinct modes with apparently opposite effects: a "non-specific" mode that forms rapidly and induces large conformational fluctuations in the RNA, and a "specific" mode that forms slowly and stabilizes the native RNA structure. The bI5 RNA folds though multiple pathways toward the native state, typically traversing dynamic intermediate states induced by non-specific binding of CBP2. These results suggest that the protein cofactor-assisted RNA folding involves sequential non-specific and specific protein-RNA interactions. The non-specific interaction potentially increases the local concentration of CBP2 and the number of conformational states accessible to the RNA, which may promote the formation of specific RNA-protein interactions.

Structural analysis of the group II intron splicing factor CRS2 yields insights into its protein and RNA interaction surfaces

Chloroplast RNA splicing 2 (CRS2) is a nuclear-encoded protein required for the splicing of nine group II introns in maize chloroplasts. CRS2 functions in the context of splicing complexes that include one of two CRS2-associated factors (CAF1 and CAF2). The CRS2-CAF1 and CRS2-CAF2 complexes are required for the splicing of different subsets of CRS2-dependent introns, and they bind tightly and specifically to their genetically defined intron targets in vivo. The CRS2 amino acid sequence is closely related to those of bacterial peptidyl-tRNA hydrolases (PTHs). To identify the structural differences between CRS2 and bacterial PTHs responsible for CRS2's gains of CAF binding and intron splicing functions, we determined the structure of CRS2 by X-ray crystallography. The fold of CRS2 is the same as that of Escherichia coli PTH, but CRS2 has two surfaces that differ from the corresponding surfaces in PTH. One of these is more hydrophobic in CRS2 than in PTH. Site-directed mutagenesis of this surface blocked CRS2-CAF complex formation, indicating that it is the CAF binding site. The CRS2 surface corresponding to the putative tRNA binding face of PTH is considerably more basic than in PTH, suggesting that CRS2 interacts with group II intron substrates via this surface. Both the sequence and the structural context of the amino acid residues essential for peptidyl-tRNA hydrolase activity are conserved in CRS2, yet expression of CRS2 is incapable of rescuing a pth(ts)E.coli strain.

Tris-borate is a poor counterion for RNA: a cautionary tale for RNA folding studies

Native polyacrylamide gel electrophoresis is a powerful approach for visualizing RNA folding states and folding intermediates. Tris-borate has a high-buffering capacity and is therefore widely used in electrophoresis-based investigations of RNA structure and folding. However, the effectiveness of Tris-borate as a counterion for RNA has not been systematically investigated. In a recirculated Hepes/KCl buffer, the catalytic core of the bI5 group I intron RNA undergoes a conformational collapse characterized by a bulk transition midpoint, or Mg1/2, of approximately 3 mM, consistent with extensive independent biochemical experiments. In contrast, in Tris-borate, RNA collapse has a much smaller apparent Mg1/2, equal to 0.1 mM, because in this buffer the RNA undergoes a different, large amplitude, folding transition at low Mg2+ concentrations. Analysis of structural neighbors using a short-lived, RNA-tethered, photocrosslinker indicates that the global RNA structure eventually converges in the two buffer systems, as the divalent ion concentration approaches approximately 1 mM Mg2+. The weak capacity of Tris-borate to stabilize RNA folding may reflect relatively unfavorable interactions between the bulky Tris-borate ion and RNA or partial coordination of RNA functional groups by borate. Under some conditions, Tris-borate is a poor counterion for RNA and its use merits careful evaluation in RNA folding studies.

Roles of protein subunits in RNA-protein complexes: lessons from ribonuclease P

Ribonucleoproteins (RNP) are involved in many essential processes in life. However, the roles of RNA and protein subunits in an RNP complex are often hard to dissect. In many RNP complexes, including the ribosome and the Group II introns, one main function of the protein subunits is to facilitate RNA folding. However, in other systems, the protein subunits may perform additional functions, and can affect the biological activities of the RNP complexes. In this review, we use ribonuclease P (RNase P) as an example to illustrate how the protein subunit of this RNP affects different aspects of catalysis. RNase P plays an essential role in the processing of the precursor to transfer RNA (pre-tRNA) and is found in all three domains of life. While every cell has an RNase P (ribonuclease P) enzyme, only the bacterial and some of the archaeal RNase P RNAs (RNA component of RNase P) are active in vitro in the absence of the RNase P protein. RNase P is a remarkable enzyme in the fact that it has a conserved catalytic core composed of RNA around which a diverse array of protein(s) interact to create the RNase P holoenzyme. This combination of highly conserved RNA and altered protein components is a puzzle that allows the dissection of the functional roles of protein subunits in these RNP complexes.

Inhibition of Escherichia coli RNase P by oligonucleotide directed misfolding of RNA

Oligonucleotide directed misfolding of RNA (ODMiR) uses short oligonucleotides to inhibit RNA function by exploiting the ability of RNA to fold into different structures with similar free energies. It is shown that the 2'-O-methyl oligonucleotide, m(CAGCCUACCCGG), can trap Escherichia coli RNase P RNA (M1 RNA) in a nonfunctional structure in a transcription mixture containing RNase P protein (C5 protein). At about 200 nM, the 12-mer thus inhibits 50% of pre-tRNA processing by RNase P. Roughly 10-fold more 12-mer is required to inhibit RNase P containing full-length, renatured RNase P RNA. Diethyl pyrocarbonate modification in the presence of 12-mer reveals increased modification of sites in and interacting with P4, suggesting a structural rearrangement of a large pseudoknot important for catalytic activity. Thus, the ODMiR method can be applied to RNAs even when folding is facilitated by a cognate protein.

Structural and biochemical analyses of DNA and RNA binding by a bifunctional homing endonuclease and group I intron splicing factor

We determined the crystal structure of a bifunctional group I intron splicing factor and homing endonuclease, termed the I-AniI maturase, in complex with its DNA target at 2.6 A resolution. The structure demonstrates the remarkable structural conservation of the beta-sheet DNA-binding motif between highly divergent enzyme subfamilies. DNA recognition by I-AniI was further studied using nucleoside deletion and DMS modification interference analyses. Correlation of these results with the crystal structure provides information on the relative importance of individual nucleotide contacts for DNA recognition. Alignment and modeling of two homologous maturases reveals conserved basic surface residues, distant from the DNA-binding surface, that might be involved in RNA binding. A point mutation that introduces a single negative charge in this region uncouples the maturase and endonuclease functions of the protein, inhibiting RNA binding and splicing while maintaining DNA binding and cleavage.

Small structural costs for evolution from RNA to RNP-based catalysis

Typical RNA-based cellular catalysts achieve their active structures only as complexes with protein cofactors, implying that protein binding compensates for some structural deficiencies in the RNA. An unresolved question was the extent to which protein-facilitation imposes additional structural costs, by requiring that an RNA maintain structures required for protein binding, beyond those required for catalysis. We used nucleotide analog interference to identify initially 71 functional group substitutions at phosphate, 2'-ribose, and adenosine base positions that compromise RNA self-splicing in the bI5 group I intron. Protein-facilitated splicing by CBP2 suppresses 11 of 30 interfering substitutions at the RNA backbone and a greater fraction, 27 of 41, at the adenosine base, including at structures conserved among group I introns. Only one substitution directly interferes with protein binding but not with self-splicing. This substitution, plus three adenosine base modifications that interfere more strongly in CBP2-dependent splicing than in self-splicing, yield a cost for protein facilitation of only four functional groups, as approximated by this set of analogs. The small observed structural cost provides a strong physical rationale for the evolutionary drive from RNA to RNP-based function in biology. Remarkably, the four extra requirements do not appear to report disruption of direct protein-RNA contacts and instead likely reflect design against misfolding rather than for maintenance of a protein-binding site.

Concerted folding of a Candida ribozyme into the catalytically active structure posterior to a rapid RNA compaction

Folding of the major population of Tetrahymena intron RNA into the catalytically active structure is trapped in a slow pathway. In this report, folding of Candida albicans intron was investigated using the trans-acting Ca.L-11 ribozyme as a model. We demonstrated that both the catalytic activity (k(obs)) and compact folding equilibrium of Ca.L-11 are strongly dependent on Mg(2+) at physiological concentrations, with both showing an Mg(2+) Hill coefficient of 3. Formation of the compact structure of Ca.L-11 is shown to occur very rapidly, on a subsecond time scale similar to that of RNase T1 cleavage. Most of the ribozyme RNA population folds into the catalytically active structure with a rate constant of 2 min(-1) at 10 mM Mg(2+); neither slower kinetics nor obvious Mg(2+) inhibition is observed. These results suggest that folding of the Ca.L-11 ribozyme is initiated by a rapid magnesium-dependent RNA compaction, which is followed by a slower searching for the native contacts to form the catalytically active structure without interference from the long-lived trapped states. This model thus provides an ideal system to address a range of interesting aspects of RNA folding, such as conformational searching, ion binding and the role of productive intermediates.

Molecular recognition properties of IGS-mediated reactions catalyzed by a Pneumocystis carinii group I intron

We report the development, analysis and use of a new combinatorial approach to analyze the substrate sequence dependence of the suicide inhibition, cyclization, and reverse cyclization reactions catalyzed by a group I intron from the opportunistic pathogen Pneumocystis carinii. We demonstrate that the sequence specificity of these Internal Guide Sequence (IGS)-mediated reactions is not high. In addition, the sequence specificity of suicide inhibition decreases with increasing MgCl(2) concentration, reverse cyclization is substantially more sequence specific than suicide inhibition, and multiple reverse cyclization products occur, in part due to the formation of multiple cyclization intermediates. Thermodynamic analysis reveals that a base pair at position -4 of the resultant 5' exon-IGS (P1) helix is crucial for tertiary docking of the P1 helix into the catalytic core of the ribozyme in the suicide inhibition reaction. In contrast to results reported with a Tetrahymena ribozyme, altering the sequence of the IGS of the P.carinii ribozyme can result in a marked reduction in tertiary stability of docking the resultant P1 helix into the catalytic core of the ribozyme. Finally, results indicate that RNA targeting strategies which exploit tertiary interactions could have low specificity due to the tolerance of mismatched base pairs.

Nuclear genes that promote splicing of group I introns in the chloroplast 23S rRNA and psbA genes in Chlamydomonas reinhardtii

Single nucleotide substitutions were made in the core helices P4, P6, and P7, and in the metal-binding GAAA motif in the J4/5 region of the chloroplast group I rRNA intron of Chlamydomonas reinhardtii, Cr.LSU. In vitro assays showed that these substitutions had surprisingly strong effects on Cr.LSU self-splicing; however, splicing of all but the P6 mutations could be at least partially recovered by increasing the Mg2+ concentration. The mutant constructs were transformed into chloroplasts to replace the wild-type intron; however, only the P4 mutants became homoplasmic, indicating that the other mutations were lethal. The splicing-deficient P4125A mutant, which exhibited slow growth and light sensitivity, was used to isolate suppressor strains that showed a substantial restoration of Cr.LSU splicing. Genetic analysis of the 7151, 7120 and 71N1 suppressors indicated that these mutations are in at least two nuclear genes. The 7151 suppressor mutation, which defines the chloroplast-splicing suppressor (css1) gene, had no obviously altered growth phenotype with the wild-type intron, and was dominant in vegetative diploids containing the mutant intron. All three of the suppressor strains also suppressed a mutation in the P4 region of the fourth psbA intron, Cr.psbA4, indicating that these genes play a role in splicing of multiple group I introns in the chloroplast.

The ubiquitous nature of RNA chaperone proteins

RNA chaperones are ubiquitous and abundant proteins found in all living organisms and viruses, where they interact with various classes of RNA. These highly diverse families of nucleic acid-binding proteins possess activities enabling rapid and faithful RNA-RNA annealing, strand transfer, and exchange and RNA ribozyme-mediated cleavage under physiological conditions. RNA chaperones appear to be critical to functions as important as maintenance of chromosome ends, DNA transcription, preRNA export, splicing and modifications, and mRNA translation and degradation. Here we review some of the properties of RNA chaperones in RNA-RNA interactions that take place during cellular processes and retrovirus replication. Examples of cellular and viral proteins are dicussed vis à vis the relationships between RNA chaperone activities in vitro and functions. In this new "genomic era" we discuss the possible use of small RNA chaperones to improve the synthesis of cDNA libraries for use in large screening reactions using DNA chips.

RNA chaperone StpA loosens interactions of the tertiary structure in the td group I intron in vivo

Efficient splicing of the td group I intron in vivo is dependent on the ribosome. In the absence of translation, the pre-mRNA is trapped in nonnative-splicing-incompetent conformations. Alternatively, folding of the pre-mRNA can be promoted by the RNA chaperone StpA or by the group I intron-specific splicing factor Cyt-18. To understand the mechanism of action of RNA chaperones, we probed the impact of StpA on the structure of the td intron in vivo. Our data suggest that StpA loosens tertiary interactions. The most prominent structural change was the opening of the base triples, which are involved in the correct orientation of the two major intron core domains. In line with the destabilizing activity of StpA, splicing of mutant introns with a reduced structural stability is sensitive to StpA. In contrast, Cyt-18 strengthens tertiary contacts, thereby rescuing splicing of structurally compromised td mutants in vivo. Our data provide direct evidence for protein-induced conformational changes within catalytic RNA in vivo. Whereas StpA resolves tertiary contacts enabling the RNA to refold, Cyt-18 contributes to the overall compactness of the td intron in vivo.

tRNA-mediated transcription antitermination in vitro: codon-anticodon pairing independent of the ribosome

Uncharged tRNA acts as the effector for transcription antitermination of genes in the T box family in Bacillus subtilis and other Gram-positive bacteria. Genetic studies suggested that expression of these genes is induced by stabilization of an antiterminator element in the leader RNA of each target gene by the cognate uncharged tRNA. The specificity of the tRNA response is dependent on a single codon in the leader, which was postulated to pair with the anticodon of the corresponding tRNA. It was not known whether the leader RNA-tRNA interaction requires additional factors. We show here that tRNA-dependent antitermination occurs in vitro in a purified transcription system, in the absence of ribosomes or accessory factors, demonstrating that the RNA-RNA interaction is sufficient to control gene expression by antitermination. The tRNA response exhibits similar specificity in vivo and in vitro, and the antitermination reaction in vitro is independent of NusA and functions with either B. subtilis or Escherichia coli RNA polymerase.

RNA chaperones exist and DEAD box proteins get a life

The RNA chaperone hypothesis suggests the existence of proteins that resolve misfolded RNA structures in vivo. A recent study has found an RNA-dependent ATPase that functions in this manner.

Ribozyme structures and mechanisms

The past few years have seen exciting advances in understanding the structure and function of catalytic RNA. Crystal structures of several ribozymes have provided detailed insight into the folds of RNA molecules. Models of other biologically important RNAs have been constructed based on structural, phylogenetic, and biochemical data. However, many questions regarding the catalytic mechanisms of ribozymes remain. This review compares the structures and possible catalytic mechanisms of four small self-cleaving RNAs: the hammerhead, hairpin, hepatitis delta virus, and in vitro-selected lead-dependent ribozymes. The organization of these small catalysts is contrasted to that of larger ribozymes, such as the group I intron.

In vitro selection of nucleoprotein enzymes

Natural nucleic acids frequently rely on proteins for stabilization or catalytic activity. In contrast, nucleic acids selected in vitro can catalyze a wide range of reactions even in the absence of proteins. To augment selected nucleic acids with protein functionalities, we have developed a technique for the selection of protein-dependent ribozyme ligases. After randomizing a previously selected ribozyme ligase, L1, we selected variants that required one of two protein cofactors, a tyrosyl transfer RNA (tRNA) synthetase (Cyt18) or hen egg white lysozyme. The resulting nucleoprotein enzymes were activated several thousand fold by their cognate protein effectors, and could specifically recognize the structures of the native proteins. Protein-dependent ribozymes can potentially be adapted to novel assays for detecting target proteins, and the selection method's generality may allow the high-throughput identification of ribozymes capable of recognizing a sizable fraction of a proteome.

Protein-dependent transition states for ribonucleoprotein assembly

Native folding and splicing by the Saccharomyces cerevisiae mitochondrial bI5 group I intron RNA is facilitated by both the S. cerevisiae CBP2 and Neurospora crassa CYT-18 protein cofactors. Both protein-bI5 RNA complexes splice at similar rates, suggesting that the RNA active site structure is similar in both ribonucleoproteins. In contrast, the two proteins assemble with the bI5 RNA by distinct mechanisms and bind opposing, but partially overlapping, sides of the group I intron catalytic core. Assembly with CBP2 is limited by a slow, unimolecular RNA folding step characterized by a negligible activation enthalpy. We show that assembly with CYT-18 shows four distinctive features. (1) CYT-18 binds stably to the bI5 RNA at the diffusion controlled limit, but assembly to a catalytically active RNA structure is still limited by RNA folding, as visualized directly using time-resolved footprinting. (2) This mechanism of rapid stable protein binding followed by subsequent assembly steps has a distinctive kinetic signature: the apparent ratio of k(off) to k(on), determined in a partitioning experiment, differs from the equilibrium K(d) by a large factor. (3) Assembly with CYT-18 is characterized by a large activation enthalpy, consistent with a rate limiting conformational rearrangement. (4) Because assembly from the kinetically trapped state is faster at elevated temperature, we can identify conditions where CYT-18 accelerates (catalyzes) bI5 RNA folding relative to assembly with CBP2.

RNA folding pathways

A general overview of the questions and problems in RNA folding is presented. Topics include the differences in the folding problems/questions that apply to RNA versus proteins, methods for determination of final structures, folding versus unfolding, resolution of space and time, and conformational switching.

Ribozyme structures and mechanisms

The past few years have seen exciting advances in understanding the structure and function of catalytic RNA. Crystal structures of several ribozymes have provided detailed insight into the folds of RNA molecules. Models of other biologically important RNAs have been constructed based on structural, phylogenetic, and biochemical data. However, many questions regarding the catalytic mechanisms of ribozymes remain. This review compares the structures and possible catalytic mechanisms of four small self-cleaving RNAs: the hammerhead, hairpin, hepatitis delta virus, and in vitro-selected lead-dependent ribozymes. The organization of these small catalysts is contrasted to that of larger ribozymes, such as the group I intron.

Site-directed mutagenesis of the yeast resolving enzyme Cce1 reveals catalytic residues and relationship with the intron-splicing factor Mrs1

The Holliday junction-resolving enzyme Cce1 is a magnesium-dependent endonuclease, responsible for the resolution of recombining mitochondrial DNA molecules in Saccharomyces cerevisiae. We have identified a homologue of Cce1 from Candida albicans and used a multiple sequence alignment to predict residues important for junction binding and catalysis. Twelve site-directed mutants have been constructed, expressed, purified, and characterized. Using this approach, we have identified basic residues with putative roles in both DNA recognition and catalysis of strand scission and acidic residues that have a purely catalytic role. We have shown directly by isothermal titration calorimetry that a group of acidic residues vital for catalytic activity in Cce1 act as ligands for the catalytic magnesium ions. Sequence similarities between the Cce1 proteins and the group I intron splicing factor Mrs1 suggest the latter may also possess a binding site for magnesium, with a putative role in stabilization of RNA tertiary structure or catalysis of the splicing reaction.

An RNA binding motif in the Cbp2 protein required for protein-stimulated RNA catalysis

The fifth and terminal intron of yeast cytochrome b pre-mRNA (a group I intron) requires a protein encoded by the nuclear gene CBP2 for splicing. Because catalysis is intrinsic to the RNA, the protein is believed to promote formation of secondary and tertiary structure of the RNA, resulting in a catalytically competent intron. In vitro, this mitochondrial intron can be made to self-splice or undergo protein-facilitated splicing by varying the Mg(2+) and monovalent salt concentrations. This two-component system, therefore, provides a good model for understanding the role of proteins in RNA folding. A UV cross-linking experiment was initiated to identify RNA binding sites on Cbp2 and gain insights into Cbp2-intron interactions. A 12-amino acid region containing a presumptive contact site near the amino terminus was targeted for mutagenesis, and mutant proteins were characterized for RNA binding and stimulation of splicing. Mutations in this region resulted in partial or complete loss of function, demonstrating the importance of this determinant for stimulation of RNA splicing. Several of the mutations that severely reduced splicing did not significantly shift the overall binding isotherm of Cbp2 for the precursor RNA, suggesting that contacts critical for activity are not necessarily reflected in the dissociation constant. This analysis has identified a unique RNA binding motif of alternating basic and aromatic residues that is essential for protein facilitated splicing.

Facilitation of group I splicing in vivo: misfolding of the Tetrahymena IVS and the role of ribosomal RNA exons

Self-splicing of the group I IVS from Tetrahymena thermophila rDNA is limited by the time required for the RNA to reach its active conformation. In vitro, folding is slow because the pre-rRNA becomes kinetically trapped in inactive structures. In vivo, splicing is 50 times more rapid, implying that misfolding of the pre-rRNA is corrected. Exon mutations that inhibit self-splicing 100-fold in vitro were fully rescued when the pre-rRNA containing the IVS was expressed in E. coli. In contrast, IVS mutations that cause misfolding were only partially suppressed at 42 degrees C, and doubled the activation energy of splicing. These results suggest that intracellular folding of the pre-rRNA involves metastable intermediates similar to those observed in vitro. Precursors with natural rRNA exons were more active and less cold-sensitive than those with non-rRNA exons. This shows that the rRNA reduces misfolding of the IVS, thereby facilitating splicing of the pre-rRNA in vivo.

Allele-specific genetic interactions between Prp8 and RNA active site residues suggest a function for Prp8 at the catalytic core of the spliceosome

The highly conserved spliceosomal protein Prp8 is known to cross-link the critical sequences at both the 5' (GU) and 3' (YAG) ends of the intron. We have identified prp8 mutants with the remarkable property of suppressing exon ligation defects due to mutations in position 2 of the 5' GU, and all positions of the 3' YAG. The prp8 mutants also suppress mutations in position A51 of the critical ACAGAG motif in U6 snRNA, which has been observed previously to cross-link position 2 of the 5' GU. Other mutations in the 5' splice site, branchpoint, and neighboring residues of the U6 ACAGAG motif are not suppressed. Notably, the suppressed residues are specifically conserved from yeast to man, and from U2- to U12-dependent spliceosomes. We propose that Prp8 participates in a previously unrecognized tertiary interaction between U6 snRNA and both the 5' and 3' ends of the intron. This model suggests a mechanism for positioning the 3' splice site for catalysis, and assigns a fundamental role for Prp8 in pre-mRNA splicing.

Group II intron splicing in Escherichia coli: phenotypes of cis-acting mutations resemble splicing defects observed in organelle RNA processing

The mitochondrial group IIB intron rI1, from the green algae Scenedesmus obliquus ' LSUrRNA gene, has been introduced into the lacZ gene encoding beta-galacto-sidase. After DNA-mediated transformation of the recombinant lacZ gene into Escherichia coli, we observed correct splicing of the chimeric precursor RNA in vivo. In contrast to autocatalytic in vitro self-splicing, intron processing in vivo is independent of the growth temperature, suggesting that in E.coli, trans -acting factors are involved in group II intron splicing. Such a system would seem suitable as a model for analyzing intron processing in a prokaryotic host. In order to study further the effect of cis -mutations on intron splicing, different rI1 mutants were analyzed (with respect to their splicing activity) in E.coli. Although the phenotypes of these E. coli intron splicing mutants were identical to those which can be observed during organellar splicing of rI1, they are different to those observed in in vitro self-splicing experiments. Therefore, in both organelles and prokaryotes, it is likely that either similar splicing factors or trans -acting factors exhibiting similar functions are involved in splicing. We speculate that ubiquitous trans -acting factors, via recent horizontal transfer, have contributed to the spread of group II introns.

In vitro suicide inhibition of self-splicing of a group I intron from Pneumocystis carinii by an N3' --> P5' phosphoramidate hexanucleotide

Binding enhancement by tertiary interactions is a strategy that takes advantage of the higher order folding of functionally important RNAs to bind short nucleic acid-based compounds tightly and more specifically than possible by simple base pairing. For example, tertiary interactions enhance binding of specific hexamers to a group I intron ribozyme from the opportunistic pathogen Pneumocystis carinii by 1,000- to 100,000-fold relative to binding by only base pairing. One such hexamer, d(AnTnGnAnCn)rU, contains an N3' --> P5' phosphoramidate deoxysugar-phosphate backbone (n) that is resistant to chemical and enzymatic decay. Here, it is shown that this hexamer is also a suicide inhibitor of the intron's self-splicing reaction in vitro. The hexamer is ligated in trans to the 3' exon of the precursor, producing dead-end products. At 4 mM Mg2+, the fraction of trans-spliced product is greater than normally spliced product at hexamer concentrations as low as 200 nM. This provides an additional level of specificity for compounds that can exploit the catalytic potential of complexes with RNA targets.

Protein component of the ribozyme ribonuclease P alters substrate recognition by directly contacting precursor tRNA

The protein component of ribonuclease P (RNase P) binds to the RNA subunit, forming a functional ribonucleoprotein complex in vivo and enhancing the affinity of the precursor tRNA (pre-tRNA) substrate. Photocrosslinking experiments with pre-tRNA bound to RNase P reconstituted with the protein component of Bacillus subtilis ribonuclease P (P protein) site specifically modified with a crosslinking reagent indicate that: (i) the central cleft of P protein directly interacts with the single-stranded 5' leader sequence of pre-tRNA, and (ii) the orientation and register of the pre-tRNA leader sequence in the central cleft places the protein component in close proximity to the active site. This unique mode of interaction suggests that the catalytic active site in RNase P occurs near the interface of RNA and protein. In contrast to other ribonucleoprotein complexes where the protein mainly stabilizes the active tertiary fold of the RNA, a critical function of the protein component of RNase P is to alter substrate specificity and enhance catalytic efficiency.

Oxidation of guanines in the iron-responsive element RNA: similar structures from chemical modification and recent NMR studies

BACKGROUND

The translation or stability of the mRNAs from ferritin, maconitase, erythroid aminoevulinate synthase and the transferrin receptor is controlled by the binding of two iron regulatory proteins to a family of hairpin-forming RNA sequences called iron-responsive elements (IREs). The determination of high-resolution nuclear magnetic resonance (NMR) structures of IRE variants suggests an unusual hexaloop structure, leading to an intra-loop G-C base pair and a highly exposed loop guanine, and a special internal loop/bulge in the ferritin IRE involving a shift in base pairing not predicted with standard algorithms.

RESULTS

Cleavage of synthetic 55- and 30-mer RNA oligonucleotides corresponding to the ferritin IRE with complexes based on oxoruthenium(IV) shows enhanced reactivity at a hexaloop guanine and at a guanine adjacent to the internal loop/bulge with strong protection at a guanine in the internal loop/bulge. These results are consistent with the recent NMR structures. The synthetic 55-mer RNA binds the iron-regulatory protein from rabbit reticulocyte lysates. The DNA analogs of the 55- and 30-mers do not show the same reactivity pattern.

CONCLUSIONS

The chemical reactivity of the guanines in the ferritin IRE towards oxoruthenium(IV) supports the published NMR structures and the known oxidation chemistry of the metal complexes. The results constitute progress towards developing stand-alone chemical nucleases that reveal significant structural properties and provide results that can ultimately be used to constrain molecular modeling.

Mutant alleles of the MRS2 gene of yeast nuclear DNA suppress mutations in the catalytic core of a mitochondrial group II intron

Previous studies show that some yeast strains carrying point mutations of domain 5 that block splicing of a mitochondrial group II intron yield spontaneous revertants in which splicing is partially restored by dominant mutations of nuclear genes. Here we cloned and sequenced the suppressor allele of one such gene, and found it to be a missense mutation of the MRS2 gene (MRS2-L232F). The MRS2 gene was first implicated in group II intron splicing by the finding that overexpression of the wild-type gene weakly suppresses the splicing defect of a mutation of another intron. Tetrad analysis showed that independently isolated suppressors of two other domain 5 mutations are also allelles of the MRS2 gene and DNA sequencing identified a new missense mutation in each strain (MRS2-T230I and MRS2-L213M). All three suppressor mutations cause a temperature-sensitive respiration defect that is dominant negative in heterozygous diploids, but those strains splice the mutant intron at the elevated temperature. The three mutations are in a domain of the protein that is likely to be a helix-turn-helix region, so that effects of the mutations on protein-protein interactions may contribute to these phenotypes. These mutations suppress the splicing defect of many, but not all, of the available splicing defective mutations of aI5gamma, including mutations of several intron domains. Protein and RNA blot experiments show that the level of the protein encoded by the MRS2 gene, but not the mRNA, is elevated by these mutations. Interestingly, overexpression of the wild-type protein restores much lower levels of splicing than were obtained with similar elevated levels of the mutated Mrs2 proteins. The splicing phenotypes of these strains suggest a direct role for Mrs2 protein on group II intron splicing, but an indirect effect is not yet ruled out.

RNA recognition by RNP proteins during RNA processing

The ribonucleoprotein (RNP) domain is one of the most common eukaryotic protein folds. Proteins containing RNP domains function in important steps of posttranscriptional regulation of gene expression by directing the assembly of multiprotein complexes on primary transcripts, mature mRNAs, and stable ribonucleoprotein components of the RNA processing machinery. The diverse functions performed by these proteins depend on their dual ability to recognize RNA and to interact with other proteins, often utilizing specialized auxiliary domains. Crystallographic and NMR structures of several RNP domains and a handful of structures of RNA-protein complexes have begun to reveal the molecular basis for RNP-RNA recognition.

A ribosomal function is necessary for efficient splicing of the T4 phage thymidylate synthase intron in vivo

Splicing of the group I intron of the T4 thymidylate synthase (td) gene was uncoupled from translation by introducing stop codons in the upstream exon. This resulted in severe splicing deficiency in vivo. Overexpression of a UGA suppressor tRNA partially rescued splicing, suggesting that this in vitro self-splicing intron requires translation for splicing in vivo. Inhibition of translation by the antibiotics chloramphenicol and spectinomycin also resulted in splicing deficiency. Ribosomal protein S12, a protein with RNA chaperone activity, and CYT-18, a protein that stabilizes the three-dimensional structure of group I introns, efficiently rescued the stop codon mutants. We identified a region in the upstream exon that interferes with splicing. Point mutations in this region efficiently alleviate the effect of a nonsense codon. We infer from these results that the ribosome acts as an RNA chaperone to facilitate proper folding of the intron.

Protein component of Bacillus subtilis RNase P specifically enhances the affinity for precursor-tRNAAsp

Ribonuclease P (RNase P) is an endonuclease that cleaves precursor tRNA to form the 5'-end of mature tRNA and is composed of a catalytic RNA subunit and a small protein subunit. The function of the protein component of Bacillus subtilis RNase P in catalysis of B. subtilis precursor tRNAAsp cleavage has been elucidated using steady-state kinetics, transient kinetics, and ligand affinity measurements to compare the functional properties of RNase P holoenzyme to RNase P RNA in 10 mM MgCl2, 100 mM NH4Cl. The protein component modestly affects several steps including </=10-fold increases in the rate constant for tRNA dissociation, the affinity of tRNA, and the rate constant for phosphodiester bond cleavage. However, the protein principally affects substrate binding, increasing the affinity of RNase P for pre-tRNAAsp by a factor of 10(4) as determined from both the ratio of the pre-tRNAAsp dissociation and association rate constants measured in 10 mM MgCl2 and a binding isotherm measured in 10 mM CaCl2 using gel filtration to separate enzyme-bound and free pre-tRNAAsp. Therefore, the main role of the protein component in RNase P is to facilitate recognition of pre-tRNA by enhancing the interaction between the enzyme and the 5'-precursor segment of the substrate, rather than stabilizing the tertiary structure of the folded RNA as has been observed for protein-facilitated group I intron self-splicing. Furthermore, the protein component maximizes the efficiency of RNase P under physiological conditions and minimizes product inhibition.

Structural basis of the RNA-binding specificity of human U1A protein

The RNP domain is a very common eukaryotic protein domain involved in recognition of a wide range of RNA structures and sequences. Two structures of human U1A in complex with distinct RNA substrates have revealed important aspects of RNP-RNA recognition, but have also raised intriguing questions concerning the origin of binding specificity. The beta-sheet of the domain provides an extensive RNA-binding platform for packing aromatic RNA bases and hydrophobic protein side chains. However, many interactions between functional groups on the single-stranded nucleotides and residues on the beta-sheet surface are potentially common to RNP proteins with diverse specificity and therefore make only limited contribution to molecular discrimination. The refined structure of the U1A complex with the RNA polyadenylation inhibition element reported here clarifies the role of the RNP domain principal specificity determinants (the variable loops) in molecular recognition. The most variable region of RNP proteins, loop 3, plays a crucial role in defining the global geometry of the intermolecular interface. Electrostatic interactions with the RNA phosphodiester backbone involve protein side chains that are unique to U1A and are likely to be important for discrimination. This analysis provides a novel picture of RNA-protein recognition, much closer to our current understanding of protein-protein recognition than that of DNA-protein recognition.

Protein-facilitated RNA folding

In the absence of protein collaborators, both simple and complex RNAs often misfold or are unfolded. Biologically important RNAs solve their folding problem, in part, using the assistance of chaperone and cofactor proteins. Recent work emphasizes several rules for RNA-protein complexes: formation involves induced fit; many large RNAs fold slowly; and ribonucleoprotein assembly requires multiple steps. Finally, protein binding can introduce thermodynamic side effects.

Rational design of allosteric ribozymes

BACKGROUND

Efficient operation of cellular processes relies on the strict control that each cell exerts over its metabolic pathways. Some protein enzymes are subject to allosteric regulation, in which binding sites located apart from the enzyme's active site can specifically recognize effector molecules and alter the catalytic rate of the enzyme via conformational changes. Although RNA also performs chemical reactions, no ribozymes are known to operate as true allosteric enzymes in biological systems. It has recently been established that small-molecule receptors can readily be made of RNA, as demonstrated by the in vitro selection of various RNA aptamers that can specifically bind corresponding ligand molecules. We set out to examine whether the catalytic activity of an existing ribozyme could be brought under the control of an effector molecule by designing conjoined aptamer-ribozyme complexes.

RESULTS

By joining an ATP-binding RNA to a self-cleaving ribozyme, we have created the first example of an allosteric ribozyme that has a catalytic rate that can be controlled by ATP. A 180-fold reduction in rate is observed upon addition of either adenosine or ATP, but no inhibition is detected in the presence of dATP or other nucleoside triphosphates. Mutations in the aptamer domain that are expected to eliminate ATP binding or that increase the distance between aptamer and ribozyme domains result in a loss of ATP-specific allosteric control. Using a similar design approach, allosteric hammerhead ribozymes that are activated in the presence of ATP were created and another ribozyme that can be controlled by theophylline was created.

CONCLUSIONS

The catalytic features of these conjoined aptamer-ribozyme constructs demonstrate that catalytic RNAs can also be subject to allosteric regulation-a key feature of certain protein enzymes. Moreover, by using simple rational design strategies, it is now possible to engineer new catalytic polynucleotides which have rates that can be tightly and specifically controlled by small effector molecules.

The Cbp2 protein stimulates the splicing of the omega intron of yeast mitochondria

The Cbp2 protein is encoded in the nucleus and is required for the splicing of the terminal intron of the mitochondrial COB gene in Saccharomyces cerevisiae . Using a yeast strain that lacks this intron but contains a related group I intron in the precursor of the large ribosomal RNA, we have determined that Cbp2 protein is also required for the normal accumulation of 21S ribosomal RNA in vivo . Such strains bearing a deletion of the CBP2 gene adapt slowly to growth in glycerol/ethanol media implying a defect in derepression. At physiologic concentrations of magnesium, Cbp2 stimulates the splicing of the ribosomal RNA intron in vitro . Nevertheless, Cbp2 is not essential for splicing of this intron in mitochondria nor is it required in vitro at magnesium concentrations >5 mM. A similar intron exists in the large ribosomal RNA (LSU) gene of Saccharomyces douglasii . This intron does need Cbp2 for catalytic activity in physiologic magnesium. Similarities between the LSU introns and COB intron 5 suggest that Cbp2 may recognize conserved elements of the these two introns, and protein-induced UV crosslinks occur in similar sites in the substrate and catalytic domains of the RNA precursors.

Aminoacyl-tRNA synthesis: divergent routes to a common goal

Aminoacyl-tRNAs are key components in protein synthesis. They are formed directly by correct acylation of tRNA (by aminoacyl-tRNA synthetases) or indirectly by tRNA-dependent transformation of misacylated tRNAs. The accuracy of aminoacyl-tRNA synthesis is enhanced by a number of further protein-RNA or protein-protein interactions, some of which are restricted to Archaea, and might reflect adaptation mechanisms to diverse conditions.