Measurement of biophysical properties of red blood cells by resistive pulse spectroscopy: volume, shape, surface area, and deformability

Influence of Na+ disorder on cytoplasmic conductivity and cellular electromagnetic (EM) energy absorption of human erythrocytes (PONE-D-21-36089)

Cytoplasmic conductivity of human erythrocytes may be significantly disturbed by the composition of the external suspending media. Effects of external NaCl on cytoplasmic conductivity of human erythrocyte (Human Red Blood Cells, HRBC) were investigated in a simple NaCl system. Using thermodynamic theory cytoplasmic conductivities could be calculated from internal [K+], [Na+], [Cl-] and [HCO3-]. Effect of cell volume and cell water changes were introduced and allowed for using the Debye-Hückel-Onsager relation and Walden's rule of viscosity. Cell volume and cell water change of HRBCs were measured in suspending isotonic solutions with conductivities from 0.50 S m-1 up to hypertonic solutions of conductivity of 2.02 S m-1 at selected temperatures of 25°C (standard benchmark temperature) and 37°C (physiological temperature). In isotonic solutions, cytoplasmic conductivity of human erythrocyte decreases with rise in the external media ionic concentration and vice versa for hypertonic solutions. The HRBC is capable of rapidly regulating its volume (and shape) over quite a wide range of osmolality. Specific Absorption Rate (SAR, 900 MHz) values (W kg-1) of electromagnetic radiation are below safe limits at non-physiological 25°C but above legal limits at 37°C [National Council on Radiation Protection and Measurements, NCRP]. However, at 37°C under both hypertonic [Na+] and isotonic but low [Na+], SAR increases further beyond legal limits.

Energy absorption of human red blood cells and conductivity of the cytoplasm influenced by temperature

The energy absorbed into tissues is known as the specific energy absorption (SAR) which is dependent on conductivity of the tissue. We calculated cytoplasmic conductivity of human red blood cell (HRBC) using the intracellular ionic concentrations and the Debye-Hückel-Onsager relation. The overall concentration is determined by cell volume and cell water content. The calculated HRBC conductivity at 25 ^o C was σ_c,₂₅ = 0.5566 ± 0.0146 S m^-1, ±SE). It is exponentially related to temperature: Q₁₀ ≈ 1.866. At 37 ^o C, the calculated SAR value is 1.6 W kg^-1 using a linear temperature compensation of conductivity. However, if using a biologically realistic non-linear temperature compensated conductivity, the SAR is ≈ 2.62 ± 0.05 W kg^-1. The relationship between SAR and temperature increase is not straightforward. Since there is a wide variance in cellular ionic and water perfusion rates more tissue-specific SAR limits which consider temperature-related factors would be valuable.

Quantitative absorption imaging of red blood cells to determine physical and mechanical properties

Red blood cells or erythrocytes, constituting 40 to 45 percent of the total volume of human blood are vesicles filled with hemoglobin with a fluid-like lipid bilayer membrane connected to a 2D spectrin network. The shape, volume, hemoglobin mass, and membrane stiffness of RBCs are important characteristics that influence their ability to circulate through the body and transport oxygen to tissues. In this study, we show that a simple two-LED set up in conjunction with standard microscope imaging can accurately determine the physical and mechanical properties of single RBCs. The Beer-Lambert law and undulatory motion dynamics of the membrane have been used to measure the total volume, hemoglobin mass, membrane tension coefficient, and bending modulus of RBCs. We also show that this method is sensitive enough to distinguish between the mechanical properties of RBCs during morphological changes from a typical discocyte to echinocytes and spherocytes. Measured values of the tension coefficient and bending modulus are 1.27 × 10-6 J m-2 and 7.09 × 10-2 J for discocytes, 4.80 × 10-6 J m-2 and 7.70 × 10-20 J for echinocytes, and 9.85 × 10-6 J m-2 and 9.69 × 10-20 J for spherocytes, respectively. This quantitative light absorption imaging reduces the complexity related to the quantitative imaging of the biophysical and mechanical properties of a single RBC that may lead to enhanced yet simplified point of care devices for analyzing blood cells.

Artificial Aquaporin That Restores Wound Healing of Impaired Cells

Artificial aquaporins are synthetic molecules that mimic the structure and function of natural aquaporins (AQPs) in cell membranes. The development of artificial aquaporins would provide an alternative strategy for treatment of AQP-related diseases. In this report, an artificial aquaporin has been constructed from an amino-terminated tubular molecule, which operates in a unimolecular mechanism. The artificial channel can work in cell membranes with high water permeability and selectivity rivaling those of AQPs. Importantly, the channel can restore wound healing of the cells that contain function-lost AQPs.

Non-uniform distribution of myosin-mediated forces governs red blood cell membrane curvature through tension modulation

The biconcave disk shape of the mammalian red blood cell (RBC) is unique to the RBC and is vital for its circulatory function. Due to the absence of a transcellular cytoskeleton, RBC shape is determined by the membrane skeleton, a network of actin filaments cross-linked by spectrin and attached to membrane proteins. While the physical properties of a uniformly distributed actin network interacting with the lipid bilayer membrane have been assumed to control RBC shape, recent experiments reveal that RBC biconcave shape also depends on the contractile activity of nonmuscle myosin IIA (NMIIA) motor proteins. Here, we use the classical Helfrich-Canham model for the RBC membrane to test the role of heterogeneous force distributions along the membrane and mimic the contractile activity of sparsely distributed NMIIA filaments. By incorporating this additional contribution to the Helfrich-Canham energy, we find that the RBC biconcave shape depends on the ratio of forces per unit volume in the dimple and rim regions of the RBC. Experimental measurements of NMIIA densities at the dimple and rim validate our prediction that (a) membrane forces must be non-uniform along the RBC membrane and (b) the force density must be larger in the dimple than the rim to produce the observed membrane curvatures. Furthermore, we predict that RBC membrane tension and the orientation of the applied forces play important roles in regulating this force-shape landscape. Our findings of heterogeneous force distributions on the plasma membrane for RBC shape maintenance may also have implications for shape maintenance in different cell types.

The spectrin-actin network of the membrane skeleton plays an important role in controlling specialized cell membrane morphology. In the paradigmatic red blood cell (RBC), where actin filaments are present exclusively in the membrane skeleton, recent experiments reveal that nonmuscle myosin IIA (NMIIA) motor contractility maintains the RBC biconcave disk shape. In this study, we have identified criteria for micron-scale distributions of NMIIA forces at the membrane required to maintain the biconcave disk shape of an RBC in the resting condition. Supported by experimental measurements of RBC NMIIA distribution, we showed that a heterogeneous force distribution with a larger force density at the dimple is able to capture the experimentally observed biconcave morphology of an RBC with better accuracy compared to previous models that did not consider the heterogeneity in the force distribution. Furthermore, we showed that the biconcave geometry of the RBC is closely regulated by the effective membrane tension and the direction of applied forces on the membrane. These findings can be generalized to any force-mediated membrane shape, providing insight into the role of actomyosin forces in prescribing and maintaining the morphology of different cell types.

Numerical simulation of particle dynamics in an orifice-electrode system. Application to counting and sizing by impedance measurement

This paper describes how to numerically tackle the problem of counting and sizing particles by impedance measurement in an orifice-electrode system. The model allows to simulate the particle dynamics submitted to strong hydrodynamic stresses through a microorifice and to compute the voltage pulses generated by the modification of the inner dielectric medium. This approach gives important information about particles size distribution and allows to quantify the role of trajectory and orientation of particles on the size measurement.

Characterization of a Structurally Intact in Situ Lung Model and Comparison of Naphthalene Protein Adducts Generated in This Model vs Lung Microsomes

Airway epithelial cells are a susceptible site for injury by ambient air toxicants such as naphthalene that undergo P450-dependent metabolic activation. The metabolism of naphthalene in Clara cells to reactive intermediates that bind covalently to proteins correlates with cell toxicity. Although several proteins adducted by reactive naphthalene metabolites were identified in microsomal incubations, new methods that maintain the structural integrity of the lung are needed to examine protein targets. Therefore, we developed a method that involves inflation of the lungs via the trachea with medium containing (14)C-naphthalene followed by incubation in situ. The viability of this preparation is supported by maintenance of glutathione levels, rates of naphthalene metabolism, and exclusion of ethidium homodimer-1 from airway epithelium. Following in situ incubation, the levels of adduct per milligram of protein were measured in proteins obtained from bronchoalveolar lavage, epithelial cells, and remaining lung. The levels of adducted proteins obtained in lavage and epithelial cells were similar and were 20-fold higher than those in residual lung tissue. (14)C-Labeled adducted proteins were identified by matrix-assisted laser desorption ionization-time-of-flight (MALDI-TOF) mass spectrometry (MS) and quadrupole-TOF MS/MS. Major adducted proteins include cytoskeletal proteins, proteins involved in folding and translocation, ATP synthase, extracellular proteins, redox proteins, and selenium binding proteins. We conclude that in situ incubation maintains structural integrity of the lung while allowing examination of reactive intermediate activation and interaction with target cell proteins of the lung. The proteins adducted and identified from in situ incubations were not the same proteins identified from microsomal incubations.

Cation-sensitive pore formation in rehydrated erythrocytes

Rehydration of red blood cells (RBC) in isotonic media after dehydration in hypertonic electrolyte or nonelectrolyte saline leads to their posthypertonic hemolysis (PH). Ca2+ ions at a concentration of more than 5 mM stimulated hemolysis of RBC treated by hypertonic sucrose but not NaCl if rehydration was carried out in the presence of cations. Zn2+ produced a more complex response of stimulation followed by inhibition as a concentration is increased. Mg2+, Ca2+, Zn2+, EDTA and sucrose exhibited only inhibition when added to isotonic NaCl media immediately after onset of rehydration or later on. At low ionic strength inhibition produced by divalent cations was markedly reduced and sucrose was ineffective. An equimolar concentration of EDTA abolished the inhibition of PH by Zn2+ ions if they were introduced into the isotonic media after the cells, but activated hemolysis when rehydration was carried out in the presence of ions. The same divalent cations prevented shape transformation and hemolysis induced by melittin if they interacted with the plasma membrane prior to the addition of melittin. Subsequent chelation of cations by EDTA triggers the full sequence of events characteristic to the action of melittin alone and resulted in cell spherulation followed by hemolysis. Inhibition of melittin-induced hemolysis produced by all cations was reversible because EDTA abolished the action of divalent cations and even stimulated hemolysis in isotonic sucrose. Similarities in the mode of action of divalent cations and EDTA on posthypertonic hemolysis which is attributed to endogenous stimuli and melittin-induced hemolysis as far as the exogenous agent is concerned imply that in both cases common intrinsic mechanisms are involved in the process of cation-sensitive pore formation in erythrocyte membranes, while differences indicate that more complex pores are formed during posthypertonic injury.

An engineering analysis of rotating sieves for hybridoma cell retention ins stirred tank bioreactors

The use of internal rotating sieves for perfused hybridoma culture offers unique advantages but has been up to now largely empirical. Calculations have been performed on a 15 l spinfilter stirred tank in order to have an idea of hydrodynamic conditions inside and outside the rotating sieve. The large peripheral velocity value, resulting from sieve rotation (compared to axial and radial velocities) is expected to affect strongly sieve surface colonization by cells; this is confirmed by lab scale experiments, showing that cell colonization is prevented providing sieve rotation exceeds a defined value (around 0.6 m.s.1 tip speed); the fluid removal force calculated under these conditions appears to be in the range of 10 pN, similar to the adhesion force already reported for mammalian cells attached to inorganic substrata.

Erythrocyte rheology

Two main subjects of erythrocyte rheology, deformation and aggregation, are discussed in detail, on the basis of biochemical structure. The close relationship between the life span (or cell aging) and the rheology of individual erythrocytes is also briefly described. A currently important problem is emphasized, that is, the molecular aspect of the dynamic cytoskeletal structure and the mechanism of its regulation. This concerns not only the rheological function and the survival of circulating erythrocytes, but also the pathophysiology of abnormal erythrocytes.

Osmotic fragility model for red cell populations

A model that predicts the osmotic fragility curve of a red cell population is developed by relating the critical osmotic pressure to the size distribution of the cells, determined by resistive pulse spectroscopy. Two of the parameters involved, namely the normalized osmotic volume correction, B, and the swelling index, k, are previously determined from the experimental average properties of the population. From these values the critical volume of the cell is obtained, and is shown to be 6-12% larger than the first spherical volume, obtained from an independent experiment. A new parameter, n, a measure of the surface area distribution of the cells, is incorporated through a simple function that relates the critical volume to the size of the cells, and is theoretically shown to be linked to parameters k and B. The model is used to fit and interpret fragility data obtained in this laboratory for normal and sickle cell samples. From the values of n obtained for normal samples, the model predicts an essentially constant surface-to-volume ratio within an individual's cell population. For sickle cell samples, instead, the value of index n is negative, thereby supporting an increase in excess surface area as cell size decreases. Both findings are in agreement with direct observations reported in the literature. It is concluded that this set of parameters may be used to develop an index classification of blood disorders.

Membrane and cytoplasmic resistivity properties of normal and sickle red blood cells

The cytoplasmic resistivities and membrane breakdown potentials of normal (AA), sickle-cell-trait (AS), as sickle (SS) red blood cells have been measured by the biophysical methodology of resistive pulse spectroscopy over a range of osmolalities. At isotonicity, the average membrane breakdown potentials are virtually identical for the three types of cells occurring at about 1150 V/cm. Average isotonic cytoplasmic resistivities are somewhat higher for the SS cells (166.7 +/- 7.49 ohm-cm) compared to the AA (147.6 +/- 1.98 ohm-cm) or AS cells (148.7 +/- 1.79 ohm-cm). As medium osmolality is varied, the differences in resistive properties become enlarged, especially at very low and very high osmolalities. At high osmolalities, both types of sickle cells show a large increase in internal resistivity compared to the normals; at low osmolality, the SS samples exhibit a distinctly different membrane breakdown characteristic, decreasing in this parameter, whereas the other two groups increase. Of the 15 SS samples tested, three displayed much higher cytoplasmic resistivities at isotonicity: 218.2 +/- 5.25 ohm-cm, compared to an average of 153.5 +/- 3.46 ohm-cm for the other 12. The relationship between these high resistivities and the subfraction of irreversibly sickled cells in the sample is discussed.

Alternative interpretation for the osmotic response of human erythrocytes

In a recent publication, Heubusch et al. (J Cell. Physiol, 122:266-272, 1985) reported changes of erythrocyte volume measured by the Coulter counter technique over a wide range of osmolalities (160 to 3000 m0sm). Their results showed a partially hindered, nonlinear response, in contrast to classical observations made over more restricted osmolality ranges, using other methods. The authors suggested the underlying cause of this behavior to be a mechanical resistance of the membrane cytoskeleton. In this paper, we wish to offer a different interpretation of their results on erythrocyte osmotic behavior, based on similar experiments carried out in our laboratory, and supported by previous analyses from the literature. In particular, it is shown that the shape-factor correction to the electronic sizing measurement can correctly account for the observed deviations from linearity in the hypotonic range. In contrast, increased chemical nonideality and eventual hemolysis are the likely factors responsible for the behavior in the hypertonic range.