Biochemical fundamentals and improvement of the selectivity of microbial sensors - a minireview

A novel approach based on ferricyanide-mediator immobilized in an ion-exchangeable biosensing film for the determination of biochemical oxygen demand

A novel biochemical oxygen demand (BOD) sensing method employing a ferricyanide (FC) mediator immobilized in an ion-exchangeable polysiloxane was developed. The ion-exchangeable polysiloxane containing alkylammonium groups (PAPS-Cl) was synthesized by sol-gel reaction of 3-(aminopropyl)trimethoxysilane (APTMOS) catalyzed by hydrochloric acid. FC was combined in PAPS-Cl via ion-association and the product was labeled as PAPS-FC, which was employed for a modified glassy carbon electrode. The apparent diffusion coefficient (D(app)) of FC on the modified glassy carbon electrode was 9.8x10(-11) cm(2) s(-1). In a three-electrode system, a linear relationship between the anodic current responses and glucose/glutamate (GGA) concentration was obtained up to 40 mg O2 L(-1) (r=0.994) when the reaction mixture was incubated for 30 min. Single sensor and piece-to-piece reproducibility were less than 3.8 and 7.7%, respectively. The effects of dissolved oxygen, pH, temperature and co-existing substances on the BOD responses were studied. The sensor responses to nine pure organic substances were compared with the conventional BOD5 method and other biosensor methods. Detection results of seawater samples were compared with those obtained from the BOD5 method and showed a good correlation (r=0.988).

A novel microbial biosensor based on cells of Gluconobacter oxydans for the selective determination of 1,3-propanediol in the presence of glycerol and its application to bioprocess monitoring

Novel and selective microbial amperometric biosensors that use Gluconobacter oxydans cells to monitor the bacterial bioconversion of glycerol (Gly) to 1,3-propanediol (1,3-PD) are described. Two different mediators, ferricyanide and flexible polyvinylimidazole osmium functionalized polymer (Os-polymer), were employed to prepare two different microbial biosensors, both of which gave high detection performance. The good operational stabilities of both types of biosensor were underlined by the ability to detect 1,3-PD throughout 140 h of continuous operation. Both microbial biosensor systems showed excellent selectivity for 1,3-PD in the presence of a high excess of glycerol [selectivity ratios (1,3-PD/Gly) of 118 or 245 for the ferricyanide and Os-polymer systems, respectively]. Further, the robustness of each microbial biosensor was highlighted by the high reliability of 1,3-PD detection achieved (average RSD of standards<2%, and well below 4% for samples). The biosensor implementing the Os-polymer mediator exhibited high selectivity towards 1,3-PD detection and allowed moderate sample throughput (up to 12 h-1) when integrated into a flow system. This system was used to monitor the concentration of 1,3-PD during a real bioprocess. Results from biosensor assays of 1,3-PD in bioprocess samples taken throughout the fermentation were in a very good agreement with results obtained from reference HPLC assays (R2=0.999).

Microbiosensors for measurement of microbially available dissolved organic carbon: sensor characteristics and preliminary environmental application

Microbial respiration-based microbiosensors used for quantification of available dissolved organic carbon (ADOC) instantaneously respired by microorganisms are described. The sensing membranes contained aerobic seawater microorganisms immobilized in a polyurethane hydrogel. Molecular investigations revealed that the bacterial strain used was most closely related to Staphylococcus warneri. This strain was characterized by low substrate selectivity, which was reflected in the response to various mono- and disaccharides, short-chain fatty acids, and amino acids, as determined using Biolog microplates. Specific emphasis was placed on critically assessing biosensor functioning that was affected by preconditioning of the selected bacterial strain, chemical and geometric properties of the sensing membrane (e.g., composition, permeability, and thickness), and the distribution, biomass, and physiological state of immobilized cells, as well as the exposure conditions (e.g., temperature and nutrient supply). The sensors revealed that there was a linear response up to a glucose concentration of 500 microM depending on the type, characteristics, and recent history of the sensors. The detection limit of the sensors was equivalent to about 6 to 10 microM glucose. The 90% response time ranged from 1 to 5 min. Generally, the response of the biosensors became weaker with time. The shelf lives of individual sensors were up to 2 weeks. Measurements based on optical ADOC microbiosensors revealed that in photoautotrophically dominated sandy coastal sediments, the pool sizes and turnover of ADOC were regulated by the photosynthetic activity of benthic microalgae and microbial aerobic respiration. A large increase in ADOC production was observed shortly after the microphytobenthic primary production reached the maximum value at midday, whereas ADOC was consumed by microbial respiration during the night.

Improved selectivity of microbial biosensor using membrane coating. Application to the analysis of ethanol during fermentation

A ferricyanide mediated microbial biosensor for ethanol detection was prepared by surface modification of a glassy carbon electrode. The selectivity of the whole Gluconobacter oxydans cell biosensor for ethanol determination was greatly enhanced by the size exclusion effect of a cellulose acetate (CA) membrane. The use of a CA membrane increased the ethanol to glucose sensitivity ratio by a factor of 58.2 and even the ethanol to glycerol sensitivity ratio by a factor of 7.5 compared with the use of a dialysis membrane. The biosensor provides rapid and sensitive detection of ethanol with a limit of detection of 0.85 microM (S/N=3). The selectivity of the biosensor toward alcohols was better compared to previously published enzyme biosensors based on alcohol oxidase or alcohol dehydrogenases. The biosensor was successfully used in an off-line monitoring of ethanol during batch fermentation by immobilized Saccharomyces cerevisiae cells with an initial glucose concentration of 200 g l(-1).

Microbial sensors on a respiratory basis for wastewater monitoring

In respect of their rapidity, their online capabilities, and their moderate costs, biosensing systems generally offer an attractive alternative to the existing methods of water analysis. Additionally, one particular advantage of microbial biosensors is the ability to measure direct effects on living cells, e.g., their respiratory activity and its alteration caused by environmental pollutants. It is true that microbial sensors, often do not provide the optimum solution for the determination of individual analytes when compared to established physico-chemical analysis methods. However, these biosensing devices are predestined for the summary determination of environmentally relevant compounds and their complex effects, respectively. For this reason, microbial sensors allow an integral evaluation of the degree of environmental pollution including the interaction of various compounds. Moreover, in some cases specific metabolic pathways in microorganisms are used, resulting in the development of microbial sensors for the more selective analysis for those compounds or pollutants, which cannot be measured by simple enzyme reactions, e.g., the determination of aromatic compounds and heavy metals. This chapter gives an overview of microbiological biosensors on respiratory basis for the measurement of the following environmentally relevant compounds: inorganic N-compounds, heavy metals, organic xenobiotics and the estimation of sum parameters or so-called complex parameters such as BOD, ADOC, N-BOD, and the inhibition of nitrification.

Rapid physiological characterization of microorganisms by biosensor technique

Eleven microorganisms, Arxula adeninivorans LS3, Candida boidinii DSM 70034, Candida lactis-condensi DSM 70635, Pichia jadinii DSM 2361, Pichia minuta DSM 7018, Kluyveromyces lactis DSM 4394, Pseudomonas putida DSM 50026, Alcaligenes sp. DSM 30002, Arthrobacter nicotianae DSM 20123 as well as Issatchenkia orientalis DSM 70077 and Rhodococcus erythropolis DSM 311 were characterized by the sensor technique by injection of 30 different substrates and substrate mixtures. The obtained data which are based on the determination of respiratory rate of microorganisms are similar to physiological characteristics obtained with conventional methods. In comparison to these conventional methods the sensor technique works much more rapid and permits quantification of the data. Therefore, the described technique provides an alternative method for the characterization of microorganisms.