2D crystallization: from art to science

Reconstitution of Detergent-Solubilized Membrane Proteins into Proteoliposomes and Nanodiscs for Functional and Structural Studies

Reconstitution of detergent-solubilized membrane proteins into phospholipid bilayers allows for functional and structural studies under close-to-native conditions that greatly support protein stability and function. Here we outline the detailed steps for membrane protein reconstitution to result in proteoliposomes and nanodiscs. Reconstitution can be achieved via a number of different strategies. The protocols for preparation of proteoliposomes use detergent removal via dialysis or via nonpolar polystyrene beads, or a mixture of the two methods. In this chapter, the protocols for nanodiscs apply polystyrene beads only. Proteoliposome preparation methods allow for substantial control of the lipid-to-protein ratio, from minimal amounts of phospholipid to high concentrations, type of phospholipid, and mixtures of phospholipids. In addition, dialysis affords a fairly large degree of control and variation of parameters such as rate of reconstitution, temperature, buffer conditions, and proteoliposome size. For the nanodisc approach, which is highly advantageous for ensuring equal access to both membrane sides of the protein as well as fast reconstitution of only a single membrane protein into a well-defined bilayer environment in each nanodisc, the protocols outline how a number of these parameters are more restricted in comparison to the proteoliposome protocols.

2D Electron Crystallography of Membrane Protein Single-, Double-, and Multi-Layered Ordered Arrays

The electron cryo-microscopy (cryo-EM) approach of 2D electron crystallography allows for structure determination of two-dimensional (2D) crystals of soluble and membrane proteins, employing identical principles and methods once 2D crystals are obtained. Two-dimensional crystallization trials of membrane proteins can result in multiple outcomes of ordered arrays, which may be suited for either 2D electron crystallography, helical analysis, or MicroED.The membrane protein 2D crystals used for 2D electron crystallography are either single- or double-layered ordered proteoliposome vesicles or sheet-like membranes. We have developed a cryo-EM grid preparation approach, which allows for the analysis of stacked 2D crystals that are neither suitable for MicroED nor for directly applying 2D electron crystallography. This new grid preparation approach, the peel-blot, uses the capillary force generated by submicron filter paper and mechanical means for the separation of stacked 2D crystals into single-layered 2D crystals, for which standard 2D electron crystallography can then be employed. The preparation of 2D crystals, the peel-blot grid preparation, and the structure determination by 2D electron crystallography are described here.

Fake It 'Till You Make It-The Pursuit of Suitable Membrane Mimetics for Membrane Protein Biophysics

Membrane proteins evolved to reside in the hydrophobic lipid bilayers of cellular membranes. Therefore, membrane proteins bridge the different aqueous compartments separated by the membrane, and furthermore, dynamically interact with their surrounding lipid environment. The latter not only stabilizes membrane proteins, but directly impacts their folding, structure and function. In order to be characterized with biophysical and structural biological methods, membrane proteins are typically extracted and subsequently purified from their native lipid environment. This approach requires that lipid membranes are replaced by suitable surrogates, which ideally closely mimic the native bilayer, in order to maintain the membrane proteins structural and functional integrity. In this review, we survey the currently available membrane mimetic environments ranging from detergent micelles to bicelles, nanodiscs, lipidic-cubic phase (LCP), liposomes, and polymersomes. We discuss their respective advantages and disadvantages as well as their suitability for downstream biophysical and structural characterization. Finally, we take a look at ongoing methodological developments, which aim for direct in-situ characterization of membrane proteins within native membranes instead of relying on membrane mimetics.

Rapid fabrication of precise high-throughput filters from membrane protein nanosheets

Biological membranes are ideal for separations as they provide high permeability while maintaining high solute selectivity due to the presence of specialized membrane protein (MP) channels. However, successful integration of MPs into manufactured membranes has remained a significant challenge. Here, we demonstrate a two-hour organic solvent method to develop 2D crystals and nanosheets of highly packed pore-forming MPs in block copolymers (BCPs). We then integrate these hybrid materials into scalable MP-BCP biomimetic membranes. These MP-BCP nanosheet membranes maintain the molecular selectivity of the three types of β-barrel MP channels used, with pore sizes of 0.8 nm, 1.3 nm, and 1.5 nm. These biomimetic membranes demonstrate water permeability that is 20-1,000 times greater than that of commercial membranes and 1.5-45 times greater than that of the latest research membranes with comparable molecular exclusion ratings. This approach could provide high performance alternatives in the challenging sub-nanometre to few-nanometre size range.

Characterization of Membrane Proteins Using Cryo-Electron Microscopy

The steep increase of atomic scale structures determined by 3D cryo-electron microscopy (EM) deposited in the EMDataBank documents progress of a methodology that was frustratingly slow ten years ago. While sample vitrification on grids has been successfully used in all EM laboratories for decades, beam damage remains a road block. Developments in instrumentation and software to exploit the information carried by elastically scattered electrons made the task to achieve atomic scale resolution easier. This together with the development of fast single electron detecting cameras has resulted in unprecedented possibilities for structure determination by 3D cryo-EM. With such technologies in place, the purification of membrane protein complexes in a functional state is key to collecting atomic scale structural information and insight into the chemistry of physiological processes. Therefore, we focus here on the preparation of membrane proteins for structural analyses by 3D cryo-EM and the data acquisition of such vitrified samples. © 2018 by John Wiley & Sons, Inc.

The C-terminus of PufX plays a key role in dimerisation and assembly of the reaction center light-harvesting 1 complex from Rhodobacter sphaeroides

In bacterial photosynthesis reaction center-light-harvesting 1 (RC-LH1) complexes trap absorbed solar energy by generating a charge separated state. Subsequent electron and proton transfers form a quinol, destined to diffuse to the cytochrome bc₁ complex. In bacteria such as Rhodobacter (Rba.) sphaeroides and Rba. capsulatus the PufX polypeptide creates a channel for quinone/quinol traffic across the LH1 complex that surrounds the RC, and it is therefore essential for photosynthetic growth. PufX also plays a key role in dimerization of the RC-LH1-PufX core complex, and the structure of the Rba. sphaeroides complex shows that the PufX C-terminus, particularly the region from X49-X53, likely mediates association of core monomers. To investigate this putative interaction we analysed mutations PufX R49L, PufX R53L, PufX R49/53L and PufX G52L by measuring photosynthetic growth, fractionation of detergent-solubilised membranes, formation of 2-D crystals and electron microscopy. We show that these mutations do not affect assembly of PufX within the core or photosynthetic growth but they do prevent dimerization, consistent with predictions from the RC-LH1-PufX structure. We obtained low resolution structures of monomeric core complexes with and without PufX, using electron microscopy of negatively stained single particles and 3D reconstruction; the monomeric complex with PufX corresponds to one half of the dimer structure whereas LH1 completely encloses the RC if the gene encoding PufX is deleted. On the basis of the insights gained from these mutagenesis and structural analyses we propose a sequence for assembly of the dimeric RC-LH1-PufX complex.

Purification of Human and Mammalian Membrane Proteins Expressed in Xenopus laevis Frog Oocytes for Structural Studies

This protocol describes the isolation of recombinant human and mammalian membrane proteins expressed in Xenopus laevis frog oocytes for structural studies. The cDNA-derived cRNA of the desired genes is injected into several hundreds of oocytes, which are incubated for several days to allow protein expression. Recombinant proteins are then purified via affinity chromatography. The novelty of this method comes from the design of a plasmid that produces multi-tagged proteins and, most importantly, the development of a protocol for efficiently discarding lipids, phospholipids, and lipoproteins from the oocyte egg yolk, which represent the major contaminants in protein purifications. Thus, the high protein purity and good yield obtained from this method allows protein structure determination by transmission electron microscopy of single detergent-solubilized protein particles and of 2D crystals of membrane protein embedded in lipid bilayers. Additionally, a radiotracer assay for functional analysis of the expressed target proteins in oocytes is described. Overall, this method is a valuable option for structural studies of mammalian and particularly human proteins, for which other expression systems often fail.

Electron Microscopy and Image Processing: Essential Tools for Structural Analysis of Macromolecules

Macromolecular electron microscopy typically depicts the structures of macromolecular complexes ranging from ∼200 kDa to hundreds of MDa. The amount of specimen required, a few micrograms, is typically 100 to 1000 times less than needed for X-ray crystallography or nuclear magnetic resonance spectroscopy. Micrographs of frozen-hydrated (cryogenic) specimens portray native structures, but the original images are noisy. Computational averaging reduces noise, and three-dimensional reconstructions are calculated by combining different views of free-standing particles ("single-particle analysis"). Electron crystallography is used to characterize two-dimensional arrays of membrane proteins and very small three-dimensional crystals. Under favorable circumstances, near-atomic resolutions are achieved. For structures at somewhat lower resolution, pseudo-atomic models are obtained by fitting high-resolution components into the density. Time-resolved experiments describe dynamic processes. Electron tomography allows reconstruction of pleiomorphic complexes and subcellular structures and modeling of macromolecules in their cellular context. Significant information is also obtained from metal-coated and dehydrated specimens.

3D reconstruction of two-dimensional crystals

Electron crystallography of two-dimensional (2D) crystals determines the structure of membrane proteins in the lipid bilayer by imaging with cryo-electron microscopy and image processing. Membrane proteins can be packed in regular 2D arrays by their reconstitution in the presence of lipids at low lipid to protein weight-to-weight ratio. The crystal quality depends on the protein purity and homogeneity, its stability, and on the crystallization conditions. A 2D crystal presents the membrane protein in a functional and fully lipidated state. Electron crystallography determines the 3D structure even of small membrane proteins up to atomic resolution, but 3D density maps have a better resolution in the membrane plane than in the vertical direction. This problem can be partly eliminated by applying an iterative algorithm that exploits additional known constraints about the 2D crystal. 2D electron crystallography is particularly attractive for the structural analysis of membrane proteins that are too small for single particle analyses and too unstable to form 3D crystals. With the recent introduction of direct electron detector cameras, the routine determination of the atomic 3D structure of membrane-embedded membrane proteins is in reach.

Inducing two-dimensional crystallization of membrane proteins by dialysis for electron crystallography

Electron crystallography is an electron cryo-microscopy (cryo-EM) method that is particularly suitable for structure-function studies of small membrane proteins, which are crystallized in two-dimensional (2D) arrays for subsequent cryo-EM data collection and image processing. This approach allows for structural analysis of membrane proteins in a close-to-native, phospholipid bilayer environment. The process of growing 2D crystals from purified membrane proteins by dialysis detergent removal is described in this chapter. A short section covers screening for and identifying 2D crystals by transmission electron microscopy, and in the last section, optimization of the purification to obtain crystals of higher quality is discussed.

Reconstitution of membrane proteins: a GPCR as an example

Membrane proteins are the gatekeepers to the cell and are essential to the function of all cells, controlling the flow of molecules and information across the cell membrane. Much effort has been put into the development of systems for studying membrane proteins in simplified environments that nevertheless mimic their native lipid environment. After isolation and production of purified membrane proteins in detergent, it is often necessary to reconstitute them into a lipid structure such as liposome, nanodisc, or lipodisq. Each of these has the advantage of returning the protein to a defined lipid environment, and the choice of system depends on the application. Regardless of the system to be used, the fundamental process involves the removal of detergent and incorporation of the protein into a stable lipid system. This chapter details methodologies we have developed, mainly focussed on the model G protein-coupled receptor (GPCR) neurotensin receptor 1, and the GPCR-homologue and model, bacteriorhopdopsin.

Sparse and incomplete factorial matrices to screen membrane protein 2D crystallization

Electron crystallography is well suited for studying the structure of membrane proteins in their native lipid bilayer environment. This technique relies on electron cryomicroscopy of two-dimensional (2D) crystals, grown generally by reconstitution of purified membrane proteins into proteoliposomes under conditions favoring the formation of well-ordered lattices. Growing these crystals presents one of the major hurdles in the application of this technique. To identify conditions favoring crystallization a wide range of factors that can lead to a vast matrix of possible reagent combinations must be screened. However, in 2D crystallization these factors have traditionally been surveyed in a relatively limited fashion. To address this problem we carried out a detailed analysis of published 2D crystallization conditions for 12 β-barrel and 138 α-helical membrane proteins. From this analysis we identified the most successful conditions and applied them in the design of new sparse and incomplete factorial matrices to screen membrane protein 2D crystallization. Using these matrices we have run 19 crystallization screens for 16 different membrane proteins totaling over 1300 individual crystallization conditions. Six membrane proteins have yielded diffracting 2D crystals suitable for structure determination, indicating that these new matrices show promise to accelerate the success rate of membrane protein 2D crystallization.

Two-dimensional protein crystals for solar energy conversion

Two-dimensional photosynthetic protein crystals provide a high density of aligned reaction centers. We reconstitute the robust light harvesting protein Photosystem I into a 2D crystal with lipids and integrate the crystals into a photo-electrochemical device. A 4-fold photocurrent enhancement is measured by incorporating conjugated oligoelectrolytes to form a supporting conductive bilayer in the device which produces a high photocurrent of ∼600 μA per mg PSI deposited.

2D and 3D crystallization of a bacterial homologue of human vitamin C membrane transport proteins

Most organisms are able to synthesize vitamin C whereas humans are not. In order to contribute to the elucidation of the molecular working mechanism of vitamin C transport through biological membranes, we cloned, overexpressed, purified, functionally characterized, and 2D- and 3D-crystallized a bacterial protein (UraDp) with 29% of amino acid sequence identity to the human sodium-dependent vitamin C transporter 1 (SVCT1). Ligand-binding experiments by scintillation proximity assay revealed that uracil is a substrate preferably bound to UraDp. For structural analysis, we report on the production of tubular 2D crystals and present a first projection structure of UraDp from negatively stained tubes. On the other hand the successful growth of UraDp 3D crystals and their crystallographic analysis is described. These 3D crystals, which diffract X-rays to 4.2Å resolution, pave the way towards the high-resolution crystal structure of a bacterial homologue with high amino acid sequence identity to human SVCT1.

Structure and function of the bacterial heterodimeric ABC transporter CydDC: stimulation of ATPase activity by thiol and heme compounds

In Escherichia coli, the biogenesis of both cytochrome bd-type quinol oxidases and periplasmic cytochromes requires the ATP-binding cassette-type cysteine/GSH transporter, CydDC. Recombinant CydDC was purified as a heterodimer and found to be an active ATPase both in soluble form with detergent and when reconstituted into a lipid environment. Two-dimensional crystals of CydDC were analyzed by electron cryomicroscopy, and the protein was shown to be made up of two non-identical domains corresponding to the putative CydD and CydC subunits, with dimensions characteristic of other ATP-binding cassette transporters. CydDC binds heme b. Detergent-solubilized CydDC appears to adopt at least two structural states, each associated with a characteristic level of bound heme. The purified protein in detergent showed a weak basal ATPase activity (approximately 100 nmol P_i/min/mg) that was stimulated ∼3-fold by various thiol compounds, suggesting that CydDC could act as a thiol transporter. The presence of heme (either intrinsic or added in the form of hemin) led to a further enhancement of thiol-stimulated ATPase activity, although a large excess of heme inhibited activity. Similar responses of the ATPase activity were observed with CydDC reconstituted into E. coli lipids. These results suggest that heme may have a regulatory role in CydDC-mediated transmembrane thiol transport.

Growth of large and highly ordered 2D crystals of a K⁺ channel, structural role of lipidic environment

2D crystallography has proven to be an excellent technique to determine the 3D structure of membrane proteins. Compared to 3D crystallography, it has the advantage of visualizing the protein in an environment closer to the native one. However, producing good 2D crystals is still a challenge and little statistical knowledge can be gained from literature. Here, we present a thorough screening of 2D crystallization conditions for a prokaryotic inwardly rectifying potassium channel (>130 different conditions). Key parameters leading to very large and well-organized 2D crystals are discussed. In addition, the problem of formation of multilayers during the growth of 2D crystals is also addressed. An intermediate resolution projection map of KirBac3.1 at 6 Å is presented, which sheds (to our knowledge) new light on the structure of this channel in a lipid environment.

Cryo-electron microscopy of membrane proteins

Electron crystallography is used to study membrane proteins in the form of planar, two-dimensional (2D) crystals, or other crystalline arrays such as tubular crystals. This method has been used to determine the atomic resolution structures of bacteriorhodopsin, tubulin, aquaporins, and several other membrane proteins. In addition, a large number of membrane protein structures were studied at a slightly lower resolution, whereby at least secondary structure motifs could be identified.In order to conserve the structural details of delicate crystalline arrays, cryo-electron microscopy (cryo-EM) allows imaging and/or electron diffraction of membrane proteins in their close-to-native state within a lipid bilayer membrane.To achieve ultimate high-resolution structural information of 2D crystals, meticulous sample preparation for electron crystallography is of outmost importance. Beam-induced specimen drift and lack of specimen flatness can severely affect the attainable resolution of images for tilted samples. Sample preparations that sandwich the 2D crystals between symmetrical carbon films reduce the beam-induced specimen drift, and the flatness of the preparations can be optimized by the choice of the grid material and the preparation protocol.Data collection in the cryo-electron microscope using either the imaging or the electron diffraction mode has to be performed applying low-dose procedures. Spot-scanning further reduces the effects of beam-induced drift. Data collection using automated acquisition schemes, along with improved and user-friendlier data processing software, is increasingly being used and is likely to bring the technique to a wider user base.

Two-dimensional crystallization of membrane proteins by reconstitution through dialysis

Studies of membrane proteins by two-dimensional (2D) crystallization and electron crystallography have provided crucial information on the structure and function of a rapidly growing number of these intricate proteins within a close-to-native lipid bilayer. Here we provide protocols for planning and executing 2D crystallization trials by detergent removal through dialysis, including the preparation of phospholipids and the dialysis setup. General factors to be considered, such as the protein preparation, solubilizing detergent, lipid for reconstitution, and buffer conditions are discussed. Several 2D crystallization conditions are highlighted that have shown great promise to grow 2D crystals within a surprisingly short amount of time. Finally, conditions for optimizing order and size of 2D crystals are outlined.

A urea channel from Bacillus cereus reveals a novel hexameric structure

Urea is exploited as a nitrogen source by bacteria, and its breakdown products, ammonia and bicarbonate, are employed to counteract stomach acidity in pathogens such as Helicobacter pylori. Uptake in the latter is mediated by UreI, a UAC (urea amide channel) family member. In the present paper, we describe the structure and function of UACBc, a homologue from Bacillus cereus. The purified channel was found to be permeable not only to urea, but also to other small amides. CD and IR spectroscopy revealed a structure comprising mainly α-helices, oriented approximately perpendicular to the membrane. Consistent with this finding, site-directed fluorescent labelling indicated the presence of seven TM (transmembrane) helices, with a cytoplasmic C-terminus. In detergent, UACBc exists largely as a hexamer, as demonstrated by both cross-linking and size-exclusion chromatography. A 9 Å (1 Å=0.1 nm) resolution projection map obtained by cryo-electron microscopy of two-dimensional crystals shows that the six protomers are arranged in a planar hexameric ring. Each exhibits six density features attributable to TM helices, surrounding a putative central channel, while an additional helix is peripherally located. Bioinformatic analyses allowed individual TM regions to be tentatively assigned to the density features, with the resultant model enabling identification of residues likely to contribute to channel function.

The influence of lipids on voltage-gated ion channels

Voltage-gated ion channels are responsible for transmitting electrochemical signals in both excitable and non-excitable cells. Structural studies of voltage-gated potassium and sodium channels by X-ray crystallography have revealed atomic details on their voltage-sensor domains (VSDs) and pore domains, and were put in context of disparate mechanistic views on the voltage-driven conformational changes in these proteins. Functional investigation of voltage-gated channels in membranes, however, showcased a mechanism of lipid-dependent gating for voltage-gated channels, suggesting that the lipids play an indispensible and critical role in the proper gating of many of these channels. Structure determination of membrane-embedded voltage-gated ion channels appears to be the next frontier in fully addressing the mechanism by which the VSDs control channel opening. Currently electron crystallography is the only structural biology method in which a membrane protein of interest is crystallized within a complete lipid-bilayer mimicking the native environment of a biological membrane. At a sufficiently high resolution, an electron crystallographic structure could reveal lipids, the channel and their mutual interactions at the atomic level. Electron crystallography is therefore a promising avenue toward understanding how lipids modulate channel activation through close association with the VSDs.

Reconstitution of water channel function and 2D-crystallization of human aquaporin 8

Among the thirteen human aquaporins (AQP0-12), the primary structure of AQP8 is unique. By sequence alignment it is evident that mammalian AQP8s form a separate subfamily distinct from the other mammalian aquaporins. The constriction region of the pore determining the solute specificity deviates in AQP8 making it permeable to both ammonia and H(2)O(2) in addition to water. To better understand the selectivity and gating mechanism of aquaporins, high-resolution structures are necessary. So far, the structure of three human aquaporins (HsAQP1, HsAQP4, and HsAQP5) have been solved at atomic resolution. For mammalian aquaporins in general, high-resolution structures are only available for those belonging to the water-specific subfamily (including HsAQP1, HsAQP4 and HsAQP5). Thus, it is of interest to solve structures of other aquaporin subfamily members with different solute specificities. To achieve this the aquaporins need to be overexpressed heterologously and purified. Here we use the methylotrophic yeast Pichia pastoris as a host for the overexpression. A wide screen of different detergents and detergent-lipid combinations resulted in the solubilization of functional human AQP8 protein and in well-ordered 2D crystals. It also became evident that removal of amino acids constituting affinity tags was crucial to achieve highly ordered 2D crystals diffracting to 3Å.

Looking back at a quarter-century of research at the Maurice E. Müller Institute for Structural Biology

The Maurice E. Müller Institute, embedded in the infrastructure of the Biozentrum, University of Basel, was founded in 1985 and financed by the Maurice E. Müller Foundation of Switzerland. For 26 years its two founders, Ueli Aebi and Andreas Engel, pursued the vision of integrated structural biology. This paper reviews selected publications issuing from the Maurice E. Müller Institute for Structural Biology and marks the end of this era.

Formation of Two-Dimensional Crystals of Membrane-Anchored and Water-Soluble Proteins

The formation of two-dimensional (2-D) crystals of biological macromolecules is of interest for nanotechnological applications. Protein 2-D crystals may be used as molecular sieves and/or support devices as components of biosensors etc. [1]. Functionally specialized 2-D crystals, containing transport or catalytic proteins, provide a certain function in a highly efficient and vectorial manner. Future developments may allow the design of more complex structures such as multilayers made from different proteins or arrays of functionally linked oligo- or multimeric complexes consisting of multiple protein species [2]. Regular 2-D arrays, either truely crystalline or densely packed molecules, are one of the basic structures taht might be used to construct more sophisticated protein-based devices. 2-D crystals have some interesting features:

Structure determination of channel and transport proteins by high-resolution microscopy techniques

High-resolution microscopy techniques provide a plethora of information on biological structures from the cellular level down to the molecular level. In this review, we present the unique capabilities of transmission electron and atomic force microscopy to assess the structure, oligomeric state, function and dynamics of channel and transport proteins in their native environment, the lipid bilayer. Most importantly, membrane proteins can be visualized in the frozen-hydrated state and in buffer solution by cryo-transmission electron and atomic force microscopy, respectively. We also illustrate the potential of the scintillation proximity assay to study substrate binding of detergent-solubilized transporters prior to crystallization and structural characterization.

Specimen preparation for electron diffraction of thin crystals

Electron crystallography has become a powerful approach for structural characterization of two-dimensional (2-D) protein crystals. The crystallographic approach provides the simplest route to the type of averaging that is essential for obtaining high resolution structural information from radiation-sensitive samples such as organic molecules. Several atomic or near atomic resolution protein structures have been solved by using cryo-electron crystallography and most of them involved using both image and electron diffraction data. An essential step in either type of work is preparation of specimens suitable for electron microscopy which retain their native state and high degree of order. Methods for preserving samples in a near-native, hydrated state have been developed, with minor variations for different specimens. The major challenge of collecting electron diffraction data particularly at high tilt angle is the blurring of diffraction spots due to imperfect flatness of the crystals. This paper discusses specimen preparation methods for electron crystallographic data collection of 2-D protein crystals with particular emphasis on the factors which affect the flatness of crystals. We also discuss some of the aspects of the data collection protocols which are particular to work with crystals.

An automated pipeline to screen membrane protein 2D crystallization

Electron crystallography relies on electron cryomicroscopy of two-dimensional (2D) crystals and is particularly well suited for studying the structure of membrane proteins in their native lipid bilayer environment. To obtain 2D crystals from purified membrane proteins, the detergent in a protein-lipid-detergent ternary mixture must be removed, generally by dialysis, under conditions favoring reconstitution into proteoliposomes and formation of well-ordered lattices. To identify these conditions a wide range of parameters such as pH, lipid composition, lipid-to-protein ratio, ionic strength and ligands must be screened in a procedure involving four steps: crystallization, specimen preparation for electron microscopy, image acquisition, and evaluation. Traditionally, these steps have been carried out manually and, as a result, the scope of 2D crystallization trials has been limited. We have therefore developed an automated pipeline to screen the formation of 2D crystals. We employed a 96-well dialysis block for reconstitution of the target protein over a wide range of conditions designed to promote crystallization. A 96-position magnetic platform and a liquid handling robot were used to prepare negatively stained specimens in parallel. Robotic grid insertion into the electron microscope and computerized image acquisition ensures rapid evaluation of the crystallization screen. To date, 38 2D crystallization screens have been conducted for 15 different membrane proteins, totaling over 3000 individual crystallization experiments. Three of these proteins have yielded diffracting 2D crystals. Our automated pipeline outperforms traditional 2D crystallization methods in terms of throughput and reproducibility.

Automated electron microscopy for evaluating two-dimensional crystallization of membrane proteins

Membrane proteins fulfill many important roles in the cell and represent the target for a large number of therapeutic drugs. Although structure determination of membrane proteins has become a major priority, it has proven to be technically challenging. Electron microscopy of two-dimensional (2D) crystals has the advantage of visualizing membrane proteins in their natural lipidic environment, but has been underutilized in recent structural genomics efforts. To improve the general applicability of electron crystallography, high-throughput methods are needed for screening large numbers of conditions for 2D crystallization, thereby increasing the chances of obtaining well ordered crystals and thus achieving atomic resolution. Previous reports describe devices for growing 2D crystals on a 96-well format. The current report describes a system for automated imaging of these screens with an electron microscope. Samples are inserted with a two-part robot: a SCARA robot for loading samples into the microscope holder, and a Cartesian robot for placing the holder into the electron microscope. A standard JEOL 1230 electron microscope was used, though a new tip was designed for the holder and a toggle switch controlling the airlock was rewired to allow robot control. A computer program for controlling the robots was integrated with the Leginon program, which provides a module for automated imaging of individual samples. The resulting images are uploaded into the Sesame laboratory information management system database where they are associated with other data relevant to the crystallization screen.

3D reconstruction from 2D crystal image and diffraction data

Electron crystallography of 2D protein crystals can determine the structure of membrane embedded proteins at high resolution. Images or electron diffraction patterns are recorded with the electron microscope of the frozen hydrated samples, and the 3D structure of the proteins is then determined by computer data processing. Here we introduce the image-processing algorithms for crystallographic Fourier space based methods using the Medical Research Council (MRC) programs, and illustrate the usage of the software packages 2dx, XDP, and IPLT.

Two-dimensional crystallization of integral membrane proteins for electron crystallography

Although membrane proteins make up 30% of the proteome and are a common target for therapeutic drugs, determination of their atomic structure remains a technical challenge. Electron crystallography represents an alternative to the conventional methods of X-ray diffraction and NMR and relies on the formation of two-dimensional crystals. These crystals are produced by reconstituting purified, detergent-solubilized membrane proteins back into the native environment of a lipid bilayer. This chapter reviews methods for producing two-dimensional crystals and for screening them by negative stain electron microscopy. In addition, we show examples of the different morphologies that are commonly obtained and describe basic image analysis procedures that can be used to evaluate their promise for structure determination by cryoelectron microscopy.

Electron crystallography and aquaporins

Electron crystallography of two-dimensional (2D) crystals can provide information on the structure of membrane proteins at near-atomic resolution. Originally developed and used to determine the structure of bacteriorhodopsin (bR), electron crystallography has recently been applied to elucidate the structure of aquaporins (AQPs), a family of membrane proteins that form pores mostly for water but also other solutes. While electron crystallography has made major contributions to our understanding of the structure and function of AQPs, structural studies on AQPs, in turn, have fostered a number of technical developments in electron crystallography. In this contribution, we summarize the insights electron crystallography has provided into the biology of AQPs, and describe technical advancements in electron crystallography that were driven by structural studies on AQP 2D crystals. In addition, we discuss some of the lessons that were learned from electron crystallographic work on AQPs.

Present and future of membrane protein structure determination by electron crystallography

Membrane proteins are critical to cell physiology, playing roles in signaling, trafficking, transport, adhesion, and recognition. Despite their relative abundance in the proteome and their prevalence as targets of therapeutic drugs, structural information about membrane proteins is in short supply. This chapter describes the use of electron crystallography as a tool for determining membrane protein structures. Electron crystallography offers distinct advantages relative to the alternatives of X-ray crystallography and NMR spectroscopy. Namely, membrane proteins are placed in their native membranous environment, which is likely to favor a native conformation and allow changes in conformation in response to physiological ligands. Nevertheless, there are significant logistical challenges in finding appropriate conditions for inducing membrane proteins to form two-dimensional arrays within the membrane and in using electron cryo-microscopy to collect the data required for structure determination. A number of developments are described for high-throughput screening of crystallization trials and for automated imaging of crystals with the electron microscope. These tools are critical for exploring the necessary range of factors governing the crystallization process. There have also been recent software developments to facilitate the process of structure determination. However, further innovations in the algorithms used for processing images and electron diffraction are necessary to improve throughput and to make electron crystallography truly viable as a method for determining atomic structures of membrane proteins.

Two-dimensional crystallization conditions of human leukotriene C4 synthase requiring adjustment of a particularly large combination of specific parameters

Human leukotriene C(4) synthase (LTC(4)S) forms highly ordered two-dimensional (2D) crystals under specific reconstitution conditions. It was found that control of a larger number of parameters than is usually observed for 2D crystallization of membrane proteins was necessary to induce crystal formation of LTC(4)S. Here, we describe the parameters that were optimized to yield large and well-ordered 2D crystals of LTC(4)S. Careful fractioning of eluates during the protein purification was essential for obtaining crystals. While the lipid-to-protein ratio was critical in obtaining order, four parameters were decisive in inducing growth of crystals that were up to several microns in size. To obtain a favorable diameter, salt, temperature, glycerol, and initial detergent concentration had to be controlled with great care. Interestingly, several crystal forms could be grown, namely the plane group symmetries of p2, p3, p312, and two different unit cell sizes of plane group symmetry p321.

Electron crystallography as a technique to study the structure on membrane proteins in a lipidic environment

The native environment of integral membrane proteins is a lipid bilayer. The structure of a membrane protein is thus ideally studied in a lipidic environment. In the first part of this review we describe some membrane protein structures that revealed the surrounding lipids and provide a brief overview of the techniques that can be used to study membrane proteins in a lipidic environment. In the second part of this review we focus on electron crystallography of two-dimensional crystals as potentially the most suitable technique for such studies. We describe the individual steps involved in the electron crystallographic determination of a membrane protein structure and discuss current challenges that need to be overcome to transform electron crystallography into a technique that can be routinely used to analyze the structure of membrane proteins embedded in a lipid bilayer.

Interfacial assembly of turnip yellow mosaic virus nanoparticles

An extensive study of the factors that affect the interfacial assembly of bionanoparticles at the oil/water (O/W) interface is reported. Bionanoparticles, such as viruses, have distinctive structural properties due to the unique arrangement of their protein structures. The assembly process of such bionanoparticles at interfaces is governed by factors including the ionic strength and pH of the aqueous layer, concentration of the particles, and nature of the oil phase. This study highlights the impact of these factors on the interfacial assembly of bionanoparticles at the O/W interface using native turnip yellow mosaic virus (TYMV) as the prototype. Robust monolayer assemblies of TYMV were produced by self-assembly at the O/W interface using emulsions and planar interfaces. TYMV maintained its structure and integrity under different assembly conditions. For the emulsion droplets, they were fully covered with TYMV as evidenced by transmission electron microscopy (TEM) and scanning force microscopy (SFM). Tensiometry and small-angle neutron scattering (SANS) further supported this finding. Although the emulsions offered a complete coverage by TYMV particles, they lacked long-range ordering due to rapid exchange at the interface. By altering the assembly process, highly ordered, hexagonal arrays of TYMV were obtained at planar O/W interfaces. The pH, ionic strength, and viscosity of the solution played a crucial role in enhancing the lateral ordering of TYMV assembled at the planar O/W interface. This interfacial ordering of TYMV particles was further stabilized by introduction of a positively charged dehydroabietyl amine (DHAA) in the organic phase which held the assembly together by electrostatic interactions. The long-range array formation was observed using TEM and SFM. The results presented here illustrate that the interfacial assembly at the O/W interface is a versatile approach to achieve highly stable self-assembled structures.

Quantitative time-resolved measurement of membrane protein-ligand interactions using microcantilever array sensors

Membrane proteins are central to many biological processes, and the interactions between transmembrane protein receptors and their ligands are of fundamental importance in medical research. However, measuring and characterizing these interactions is challenging. Here we report that sensors based on arrays of resonating microcantilevers can measure such interactions under physiological conditions. A protein receptor--the FhuA receptor of Escherichia coli--is crystallized in liposomes, and the proteoliposomes then immobilized on the chemically activated gold-coated surface of the sensor by ink-jet spotting in a humid environment, thus keeping the receptors functional. Quantitative mass-binding measurements of the bacterial virus T5 at subpicomolar concentrations are performed. These experiments demonstrate the potential of resonating microcantilevers for the specific, label-free and time-resolved detection of membrane protein-ligand interactions in a micro-array format.

Electron microscopy and image processing: an essential tool for structural analysis of macromolecules

Macromolecular electron microscopy (EM) deals with macromolecular complexes and their placement within the cell-linking the molecular and cellular worlds as a bridge between atomic-resolution X-ray crystallographic or NMR studies and lower resolution light microscopy. The amount of specimen required is typically 10(2) to 10(3) times less than for X-ray crystallography or NMR. Electron micrographs of frozen-hydrated specimens portray native structures. Computer averaging yields enhanced images with reduced noise. Three-dimensional reconstructions may be computed from multiple views. Under favorable circumstances, resolutions of 7 to 10 A are achieved. Fitting atomic-resolution coordinates of components into three-dimensional density maps gives pseudo-atomic models of a complex's structure and interactions. Time-resolved experiments describe conformational changes. Electron tomography allows reconstruction of pleiomorphic complexes and sub-cellular structures. Electron crystallography has produced near-atomic resolution models of two-dimensional arrays, notably of membrane proteins.

Molecular electron microscopy: state of the art and current challenges

The objective of molecular electron microscopy (EM) is to use electron microscopes to visualize the structure of biological molecules. This Review provides a brief overview of the methods used in molecular EM, their respective strengths and successes, and current developments that promise an even more exciting future for molecular EM in the structural investigation of proteins and macromolecular complexes, studied in isolation or in the context of cells and tissues.

Three-dimensional reconstruction of a membrane-bending complex: the RC-LH1-PufX core dimer of Rhodobacter sphaeroides

A three-dimensional model of the dimeric reaction center-light harvesting I-PufX (RC-LH1-PufX) complex from Rhodobacter sphaeroides, calculated from electron microscope single particle analysis of negatively stained complexes, shows that the two halves of the dimer molecule incline toward each other on the periplasmic side, creating a remarkable V-shaped structure. The distribution of negative stain is consistent with loose packing of the LH1 ring near the 14th LH1 alpha/beta pair, which could facilitate the migration of quinone and quinol molecules across the LH1 boundary. The three-dimensional model encloses a space near the reaction center Q(B) site and the 14th LH1 alpha/beta pair, which is approximately 20 angstroms in diameter, sufficient to sequester a quinone pool. Helical arrays of dimers were used to construct a three-dimensional membrane model, which matches the packing lattice deduced from electron microscope analysis of the tubular dimer-only membranes found in mutants of Rba. sphaeroides lacking the LH2 complex. The intrinsic curvature of the dimer explains the shape and approximately 70-nm diameter of these membrane tubules, and at least partially accounts for the spherical membrane invaginations found in wild-type Rba. sphaeroides. A model of dimer aggregation and membrane curvature in these spherical membrane invaginations is presented.

Construction of hybrid photosynthetic units using peripheral and core antennae from two different species of photosynthetic bacteria: detection of the energy transfer from bacteriochlorophyll a in LH2 to bacteriochlorophyll b in LH1

Typical purple bacterial photosynthetic units consist of supra-molecular arrays of peripheral (LH2) and core (LH1-RC) antenna complexes. Recent atomic force microscopy pictures of photosynthetic units in intact membranes have revealed that the architecture of these units is variable (Scheuring et al. (2005) Biochim Bhiophys Acta 1712:109-127). In this study, we describe methods for the construction of heterologous photosynthetic units in lipid-bilayers from mixtures of purified LH2 (from Rhodopseudomonas acidophila) and LH1-RC (from Rhodopseudomonas viridis) core complexes. The architecture of these reconstituted photosynthetic units can be varied by controlling ratio of added LH2 to core complexes. The arrangement of the complexes was visualized by electron-microscopy in combination with Fourier analysis. The regular trigonal array of the core complexes seen in the native photosynthetic membrane could be regenerated in the reconstituted membranes by temperature cycling. In the presence of added LH2 complexes, this trigonal symmetry was replaced with orthorhombic symmetry. The small lattice lengths for the latter suggest that the constituent unit of the orthorhombic lattice is the LH2. Fluorescence and fluorescence-excitation spectroscopy was applied to the set of the reconstituted membranes prepared with various proportions of LH2 to core complexes. Remarkably, even though the LH2 complexes contain bacteriochlorophyll a, and the core complexes contain bacteriochlorophyll b, it was possible to demonstrate energy transfer from LH2 to the core complexes. These experiments provide a first step along the path toward investigating how changing the architecture of purple bacterial photosynthetic units affects the overall efficiency of light-harvesting.

Unexpected stability of phospholipid langmuir monolayers deposited on Triton X-100 aqueous solutions

We studied at the molecular level the interaction between neutral detergent Triton X-100 aqueous solution and a phospholipid Langmuir monolayer deposited on top using surface pressure measurement and grazing incidence X-ray diffraction (GIXD). Macroscopically, the detergent-phospholipid system follows the Gibbs law. However, GIXD shows that the detergent and the phospholipid segregate at the interface. The molecular organization of pure phospholipid domains is imposed by the detergent through surface pressure. Compression and expansion of the surface monolayer system in its final state reveal the stability of the phospholipids domains against dissolution by the detergent in the subphase, even above the detergent cmc. This resistance to dissolution is suppressed by an expansion of the monolayer.

The structure of the prokaryotic cyclic nucleotide-modulated potassium channel MloK1 at 16 A resolution

The gating ring of cyclic nucleotide-modulated channels is proposed to be either a two-fold symmetric dimer of dimers or a four-fold symmetric tetramer based on high-resolution structure data of soluble cyclic nucleotide-binding domains and functional data on intact channels. We addressed this controversy by obtaining structural data on an intact, full-length, cyclic nucleotide-modulated potassium channel, MloK1, from Mesorhizobium loti, which also features a putative voltage-sensor. We present here the 3D single-particle structure by transmission electron microscopy and the projection map of membrane-reconstituted 2D crystals of MloK1 in the presence of cAMP. Our data show a four-fold symmetric arrangement of the CNBDs, separated by discrete gaps. A homology model for full-length MloK1 suggests a vertical orientation for the CNBDs. The 2D crystal packing in the membrane-embedded state is compatible with the S1-S4 domains in the vertical "up" state.