Positive-selection vectors using the F plasmid ccdB killer gene

Allelic Exchange: Construction of an Unmarked In-Frame Deletion in Staphylococcus aureus

Here we describe an allelic-exchange procedure for the construction of an unmarked gene deletion in the bacterium Staphylococcus aureus As a practical example, we outline the construction of a tagO gene deletion in S. aureus using the allelic-exchange plasmid pIMAY*. We first present the general principles of the allelic-exchange method, along with information on counterselectable markers. Furthermore, we summarize relevant cloning procedures, such as the splicing by overhang extension (SOE) polymerase chain reaction (PCR) and Gibson assembly methods, and we conclude by giving some general consideration to performing genetic modifications in S. aureus.

An expandable FLP-ON::TIR1 system for precise spatiotemporal protein degradation in Caenorhabditis elegans

The auxin-inducible degradation system has been widely adopted in the Caenorhabditis elegans research community for its ability to empirically control the spatiotemporal expression of target proteins. This system can efficiently degrade auxin-inducible degron (AID)-tagged proteins via the expression of a ligand-activatable AtTIR1 protein derived from A. thaliana that adapts target proteins to the endogenous C. elegans proteasome. While broad expression of AtTIR1 using strong, ubiquitous promoters can lead to rapid degradation of AID-tagged proteins, cell type-specific expression of AtTIR1 using spatially restricted promoters often results in less efficient target protein degradation. To circumvent this limitation, we have developed an FLP/FRT3-based system that functions to reanimate a dormant, high-powered promoter that can drive sufficient AtTIR1 expression in a cell type-specific manner. We benchmark the utility of this system by generating a number of tissue-specific FLP-ON::TIR1 drivers to reveal genetically separable cell type-specific phenotypes for several target proteins. We also demonstrate that the FLP-ON::TIR1 system is compatible with enhanced degron epitopes. Finally, we provide an expandable toolkit utilizing the basic FLP-ON::TIR1 system that can be adapted to drive optimized AtTIR1 expression in any tissue or cell type of interest.

CRISPR-Cas-Guided Mutagenesis of Chromosome and Virulence Plasmid in Shigella flexneri by Cytosine Base Editing

Shigella is a Gram-negative bacterium that invades the human gut epithelium. The resulting infection, shigellosis, is the deadliest bacterial diarrheal disease. Much of the information about the genes dictating the pathophysiology of Shigella, both on the chromosome and the virulence plasmid, was obtained by classical reverse genetics. However, technical limitations of the prevalent mutagenesis techniques restrict the generation of mutants in a single reaction to a small number, preventing large-scale targeted mutagenesis of Shigella and the subsequent assessment of phenotype. We adopted a CRISPR-Cas-dependent approach, where a nickase Cas9 and cytidine deaminase fusion is guided by single guide RNA (sgRNA) to introduce targeted C→T transitions, resulting in internal stop codons and premature termination of translation. In proof-of-principle experiments using an mCherry fluorescent reporter, we were able to generate loss-of-function mutants in both Escherichia coli and Shigella flexneri with up to 100% efficacy. Using a modified fluctuation assay, we determined that under optimized conditions, the frequency of untargeted mutations introduced by the Cas9-deaminase fusion was in the same range as spontaneous mutations, making our method a safe choice for bacterial mutagenesis. Furthermore, we programmed the method to mutate well-characterized chromosomal and plasmid-borne Shigella flexneri genes and found the mutant phenotype to be similar to those of the reported gene deletion mutants, with no apparent polar effects at the phenotype level. This method can be used in a 96-well-plate format to increase the throughput and generate an array of targeted loss-of-function mutants in a few days. IMPORTANCE Loss-of-function mutagenesis is critical in understanding the physiological role of genes. Therefore, high-throughput techniques to generate such mutants are important for facilitating the assessment of gene function at a pace that matches systems biology approaches. However, to our knowledge, no such method was available for generating an array of single gene mutants in an important enteropathogen-Shigella. This pathogen causes high morbidity and mortality in children, and antibiotic-resistant strains are quickly emerging. Therefore, determination of the function of unknown Shigella genes is of the utmost importance to develop effective strategies to control infections. Our present work will bridge this gap by providing a rapid method for generating loss-of-function mutants. The highly effective and specific method has the potential to be programmed to generate multiple mutants in a single, massively parallel reaction. By virtue of plasmid compatibility, this method can be extended to other members of Enterobacteriaceae.

Heritable transgene-free genome editing in plants by grafting of wild-type shoots to transgenic donor rootstocks

Generation of stable gene-edited plant lines using clustered regularly interspaced short palindromic repeats (CRISPR)-CRISPR-associated protein 9 (Cas9) requires a lengthy process of outcrossing to eliminate CRISPR-Cas9-associated sequences and produce transgene-free lines. We have addressed this issue by designing fusions of Cas9 and guide RNA transcripts to tRNA-like sequence motifs that move RNAs from transgenic rootstocks to grafted wild-type shoots (scions) and achieve heritable gene editing, as demonstrated in wild-type Arabidopsis thaliana and Brassica rapa. The graft-mobile gene editing system enables the production of transgene-free offspring in one generation without the need for transgene elimination, culture recovery and selection, or use of viral editing vectors. We anticipate that using graft-mobile editing systems for transgene-free plant production may be applied to a wide range of breeding programs and crop plants.

Biology and evolution of bacterial toxin-antitoxin systems

Toxin-antitoxin systems are widespread in bacterial genomes. They are usually composed of two elements: a toxin that inhibits an essential cellular process and an antitoxin that counteracts its cognate toxin. In the past decade, a number of new toxin-antitoxin systems have been described, bringing new growth inhibition mechanisms to light as well as novel modes of antitoxicity. However, recent advances in the field profoundly questioned the role of these systems in bacterial physiology, stress response and antimicrobial persistence. This shifted the paradigm of the functions of toxin-antitoxin systems to roles related to interactions between hosts and their mobile genetic elements, such as viral defence or plasmid stability. In this Review, we summarize the recent progress in understanding the biology and evolution of these small genetic elements, and discuss how genomic conflicts could shape the diversification of toxin-antitoxin systems.

Expansion of the Yeast Modular Cloning Toolkit for CRISPR-Based Applications, Genomic Integrations and Combinatorial Libraries

Standardisation of genetic parts has become a topic of increasing interest over the last decades. The promise of simplifying molecular cloning procedures, while at the same time making them more predictable and reproducible has led to the design of several biological standards, one of which is modular cloning (MoClo). The Yeast MoClo toolkit provides a large library of characterised genetic parts combined with a comprehensive and flexible assembly strategy. Here we aimed to (1) simplify the adoption of the standard by providing a simple design tool for including new parts in the MoClo library, (2) characterise the toolkit further by demonstrating the impact of a BglII site in promoter parts on protein expression, and (3) expand the toolkit to enable efficient construction of gRNA arrays, marker-less integration cassettes and combinatorial libraries. These additions make the toolkit more applicable for common engineering tasks and will further promote its adoption in the yeast biological engineering community.

Cloning and Transformation with Plasmid Vectors

Plasmids occupy a place of honor in molecular cloning: They were used in the first recombinant DNA experiments and, 40 or more years later, they remain as the carriage horses of molecular cloning. After almost half a century of sequential improvement in design, today's plasmid vectors are available in huge variety, are often optimized for specific purposes, and bear only passing resemblance to their forebears. Here, various features of plasmid vectors and methods for transforming E. coli cells are introduced.

Plasmid Curing and Exchange Using a Novel Counter-Selectable Marker Based on Unnatural Amino Acid Incorporation at a Sense Codon

A protocol was designed for plasmid curing using a novel counter-selectable marker, named pylS^ZK-pylT, in Escherichia coli. The pylS^ZK-pylT marker consists of the archaeal pyrrolysyl-tRNA synthetase (PylRS) and its cognate tRNA (tRNA^pyl) with modification, and incorporates an unnatural amino acid (Uaa), N^ε-benzyloxycarbonyl-l-lysine (ZK), at a sense codon in ribosomally synthesized proteins, resulting in bacterial growth inhibition or killing. Plasmid curing is performed by exerting toxicity on pylS^ZK-pylT located on the target plasmid, and selecting only proliferative bacteria. All tested bacteria obtained using this protocol had lost the target plasmid (64/64), suggesting that plasmid curing was successful. Next, we attempted to exchange plasmids with the identical replication origin and an antibiotic resistance gene without plasmid curing using a modified protocol, assuming substitution of plasmids complementing genomic essential genes. All randomly selected bacteria after screening had only the substitute plasmid and no target plasmid (25/25), suggesting that plasmid exchange was also accomplished. Counter-selectable markers based on PylRS-tRNA^pyl, such as pylS^ZK-pylT, may be scalable in application due to their independence from the host genotype, applicability to a wide range of species, and high tunability due to the freedom of choice of target codons and Uaa’s to be incorporated.

A Guide to Cloning the Products of Polymerase Chain Reactions

This introduction outlines various methods to clone amplified DNAs and to facilitate the construction of complex multicomponent genetic units. Because of the ease with which the termini of amplified DNAs can be tailored by polymerase chain reaction (PCR), many of the methods outlined here use PCR not only to synthesize DNAs but also to link them together into purpose-designed constructs. The most recent refinements however have been the development of modular genetic units that can be harnessed to target DNAs not by PCR but by site-specific recombination enzymes.

Applications of Golden Gate cloning to protein production using the baculovirus expression vector system

Advances in structural biology techniques over the last decades have made it increasingly possible to determine the structures of multi-protein complexes. Generation of sufficient recombinant material for such studies remains a bottleneck and often requires screening a variety of purification strategies and different subunit compositions to reproducibly isolate homogeneous complexes. Parallel advances in molecular biology now make it possible to easily generate panels of constructs with different affinity tags and different multi-protein components. Here, we describe two protocols based on Golden Gate cloning, which facilitate the generation of multi-protein complexes for protein production via the Baculovirus Expression Vector System. This robust method makes it possible to efficiently generate a panel of multi-gene expression constructs containing up to 15 open reading frames.

Engineered yeast genomes accurately assembled from pure and mixed samples

Yeast whole genome sequencing (WGS) lacks end-to-end workflows that identify genetic engineering. Here we present Prymetime, a tool that assembles yeast plasmids and chromosomes and annotates genetic engineering sequences. It is a hybrid workflow-it uses short and long reads as inputs to perform separate linear and circular assembly steps. This structure is necessary to accurately resolve genetic engineering sequences in plasmids and the genome. We show this by assembling diverse engineered yeasts, in some cases revealing unintended deletions and integrations. Furthermore, the resulting whole genomes are high quality, although the underlying assembly software does not consistently resolve highly repetitive genome features. Finally, we assemble plasmids and genome integrations from metagenomic sequencing, even with 1 engineered cell in 1000. This work is a blueprint for building WGS workflows and establishes WGS-based identification of yeast genetic engineering.

Approaches to genetic tool development for rapid domestication of non-model microorganisms

Non-model microorganisms often possess complex phenotypes that could be important for the future of biofuel and chemical production. They have received significant interest the last several years, but advancement is still slow due to the lack of a robust genetic toolbox in most organisms. Typically, "domestication" of a new non-model microorganism has been done on an ad hoc basis, and historically, it can take years to develop transformation and basic genetic tools. Here, we review the barriers and solutions to rapid development of genetic transformation tools in new hosts, with a major focus on Restriction-Modification systems, which are a well-known and significant barrier to efficient transformation. We further explore the tools and approaches used for efficient gene deletion, DNA insertion, and heterologous gene expression. Finally, more advanced and high-throughput tools are now being developed in diverse non-model microbes, paving the way for rapid and multiplexed genome engineering for biotechnology.

Conjugal DNA Transfer in Sodalis glossinidius, a Maternally Inherited Symbiont of Tsetse Flies

Tsetse flies are the insect vectors of T. brucei, the causative agent of African sleeping sickness—a zoonotic disease that inflicts a substantial economic cost on a broad region of sub-Saharan Africa. Notably, tsetse flies can be infected with the bacterium S. glossinidius to establish an asymptomatic chronic infection. This infection can be inherited by future generations of tsetse flies, allowing S. glossinidius to spread and persist within populations. To this effect, S. glossinidius has been considered a potential expression platform to create flies which reduce T. brucei stasis and lower overall parasite transmission to humans and animals. However, the efficient genetic manipulation of S. glossinidius has remained a technical challenge due to its complex growth requirements and uncharacterized physiology. Here, we exploit a natural mechanism of DNA transfer among bacteria and develop an efficient technique to genetically manipulate S. glossinidius for future studies in reducing trypanosome transmission.

Stable associations between insects and bacterial species are widespread in nature. This is the case for many economically important insects, such as tsetse flies. Tsetse flies are the vectors of Trypanosoma brucei, the etiological agent of African trypanosomiasis—a zoonotic disease that incurs a high socioeconomic cost in regions of endemicity. Populations of tsetse flies are often infected with the bacterium Sodalis glossinidius. Following infection, S. glossinidius establishes a chronic, stable association characterized by vertical (maternal) and horizontal (paternal) modes of transmission. Due to the stable nature of this association, S. glossinidius has been long sought as a means for the implementation of anti-Trypanosoma paratransgenesis in tsetse flies. However, the lack of tools for the genetic modification of S. glossinidius has hindered progress in this area. Here, we establish that S. glossinidius is amenable to DNA uptake by conjugation. We show that conjugation can be used as a DNA delivery method to conduct forward and reverse genetic experiments in this bacterium. This study serves as an important step in the development of genetic tools for S. glossinidius. The methods highlighted here should guide the implementation of genetics for the study of the tsetse-Sodalis association and the evaluation of S. glossinidius-based tsetse fly paratransgenesis strategies.

IMPORTANCE Tsetse flies are the insect vectors of T. brucei, the causative agent of African sleeping sickness—a zoonotic disease that inflicts a substantial economic cost on a broad region of sub-Saharan Africa. Notably, tsetse flies can be infected with the bacterium S. glossinidius to establish an asymptomatic chronic infection. This infection can be inherited by future generations of tsetse flies, allowing S. glossinidius to spread and persist within populations. To this effect, S. glossinidius has been considered a potential expression platform to create flies which reduce T. brucei stasis and lower overall parasite transmission to humans and animals. However, the efficient genetic manipulation of S. glossinidius has remained a technical challenge due to its complex growth requirements and uncharacterized physiology. Here, we exploit a natural mechanism of DNA transfer among bacteria and develop an efficient technique to genetically manipulate S. glossinidius for future studies in reducing trypanosome transmission.

Exploring the synthetic biology potential of bacteriophages for engineering non-model bacteria

Non-model bacteria like Pseudomonas putida, Lactococcus lactis and other species have unique and versatile metabolisms, offering unique opportunities for Synthetic Biology (SynBio). However, key genome editing and recombineering tools require optimization and large-scale multiplexing to unlock the full SynBio potential of these bacteria. In addition, the limited availability of a set of characterized, species-specific biological parts hampers the construction of reliable genetic circuitry. Mining of currently available, diverse bacteriophages could complete the SynBio toolbox, as they constitute an unexplored treasure trove for fully adapted metabolic modulators and orthogonally-functioning parts, driven by the longstanding co-evolution between phage and host.

Non-model bacteria offer unique and versatile metabolisms for synthetic biology. In this Perspective, the authors explore the limited availability of well-characterised biological parts in these species and argue that bacteriophages represent a diverse trove of orthogonal parts.

GoldenBac: a simple, highly efficient, and widely applicable system for construction of multi-gene expression vectors for use with the baculovirus expression vector system

Background

Recombinant protein production and purification of large protein complexes in eukaryotes requires efficient methods to generate multi-gene expression constructs, where each individual gene is under the control of its own promoter and terminator. Current methods are based either on serial rounds of combination of several vectors containing loxP sites via the Cre-lox technology, or on multiple rounds of gene combination via PCR or other methods. These methods are multi-step, have lower efficiencies than single gene cloning, and may require laborious processes to verify that all genes of interest are present in the final product. Here, we describe a rapid and simple Golden Gate-based system for the generation of multi-gene expression constructs compatible with baculovirus expression vector systems (BEVS) using either Tn7 transposition or KO1629-based homologous recombination, which we refer to as “GoldenBac”.

Results

This method is based on the construction of a series of vectors containing a promoter-gene of interest-terminator cassette flanked by cleavage sites of the BsaI type IIS restriction enzyme. This series of vectors can be cut by BsaI to excise cassettes with unique overhangs. In the same reaction, the cassettes are then ligated in the correct sequence in a final destination vector to generate multi-gene expression constructs containing 2–15 genes. Individual expression constructs can therefore be combined into a single vector in a single reaction, with over 90% efficiency when combining up to 14 expression cassettes. We demonstrate successful construction and expression of three different co-expression systems, the proteosomal lid complex, the anaphase promoting complex/cyclosome (APC/C), and a series of constructs used to test the effect of chaperone co-expression on the solubility of the HOIP protein.

Conclusions

This robust, single-step cloning system provides an easy-to-use method for generation of multi-gene expression constructs for both transposition and homologous recombination-based baculovirus systems, making this technology available across all laboratories using baculovirus expression systems. This highly efficient and simple method allows for rapid incorporation of multi-gene expression cloning into the standardized service portfolio of protein production facilities and can also easily be adopted by any laboratory for routine generation of multi-gene baculovirus constructs.

Protocol: low cost fast and efficient generation of molecular tools for small RNA analysis

BACKGROUND

Small RNAs are sequence-dependent negative regulators of gene expression involved in many relevant plant processes such as development, genome stability, or stress response. Functional characterization of sRNAs in plants typically relies on the modification of the steady state levels of these molecules. State-of-the-art strategies to reduce plant sRNA levels include molecular tools such as Target Mimics (MIMs or TMs), Short Tandem Target Mimic (STTMs), or molecular SPONGES (SPs). Construction of these tools routinely involve many different molecular biology techniques, steps, and reagents rendering such processes expensive, time consuming, and difficult to implement, particularly high-throughput approaches.

RESULTS

We have developed a vector and a cloning strategy that significantly reduces the number of steps required for the generation of MIMs against any given small RNA (sRNA). Our pGREEN-based binary expression vector (pGREEN-DLM100) contains the IPS1 gene from A. thaliana bisected by a ccdB cassette that is itself flanked by restriction sites for a type IIS endonuclease. Using a single digestion plus a sticky-end ligation step, the ccdB cassette that functions as a negative (counter) selection system is replaced by a pair of 28 nt self-annealing primers that provide specificity against the selected target miRNA/siRNA. The method considerably reduces the number of steps and the time required to generate the construct, minimizes the errors derived from long-range PCRs, bypasses bottlenecks derived from subcloning steps, and eliminates the need for any additional cloning technics and reagents, overall saving time and reagents.

CONCLUSIONS

Our streamlined system guarantees a low cost, fast and efficient cloning process that it can be easily implemented into high-throughput strategies, since the same digested plasmid can be used for any given sRNA. We believe this method represents a significant technical improvement on state-of-the-art methods to facilitate the characterization of functional aspects of sRNA biology.

Cloning, heterologous expression and characterization of a novel streptomyces trypsin in Bacillus subtilis SCK6

A novel streptomyces trypsin GM2938 was selected as the object of study. The active GM2938 contains 223 amino acid residues. Constructing recombinant plasmid and transforming Bacillus subtilis SCK6, the heterogenous expression of GM2938 was achieved. Through optimization of fermentation conditions, the expression level of GM2938 reached 1622.2 U/mL (esterase activity) and 33.8 U/mL (amidase activity). The recombinant trypsin was purified and measured: the specific activity of esterase was 5.6 × 10³ U/mg, and the specific activity of amidase was 1.1 × 10³ U/mg. Furthermore, the enzymatic properties of GM2938 were explore: the optimal reaction temperature and pH were 50 °C and 9.0, respectively; the recombinant enzyme show high stability at 25 °C and range of pH 5.0-9.0; Ca²⁺, K⁺, Mg²⁺, EDTA, DTT, DMSO, methanol, glycerin and ethanediol could promote the esterase and amidase activities at the investigated concentrations, while Fe²⁺, SDS, tritonx-100, acetone, chloroform and n-hexane inhibited the trypsin activities. Kinetic parameters of GM2938 were calculated: the Km of BAEE was 3.15 × 10^-5 mol·L^-1, Vmax value was 2.87 × 10^-4 mol·L^-1·min^-1; the Km of BAPAN was 2.20 × 10^-4 mol·L^-1, the Vmax was 2.40 × 10^-4 mol·L^-1·min^-1. These properties give trypsin GM2938 a potential application prospect.

Seamless insert-plasmid assembly at sub-terminal homologous sequences

The engineering of fusion proteins for structural biology and protein nanotechnology often requires seamless DNA assembly with slight variations in the domain boundaries. To improve the molecular biology workflow for such projects, we evaluated the use of sub-terminal homologous sequences (HS) for co-transformation cloning and for T5 exonuclease / Phusion DNA polymerase mediated in vitro assembly. To quantify the effects of different HS-to-ends distances on cloning efficiency, we designed a blue-white-pink screening system that allowed us to easily identify positive clones (blue colonies), negative clones resulting from circular template plasmid (pink colonies) and negative colonies originating from linearized plasmids that have recircularized without an insert (white colonies). Our experiments show that both methods are feasible with HS-to-ends distances up to at least 10 base pairs. Using a combination of co-transformation cloning at sub-terminal HS and nucleotide insertions in non-annealing primer 5'-overhangs, we integrated a fusion protein into the third intracellular loop (ICL) of a G-protein-coupled receptor (GPCR) with nine different linker boundaries, using only a single plasmid linearization reaction. This molecular cloning approach is an invaluable tool for protein engineering, protein nanotechnology and synthetic biology that extends the range of applications of DNA assembly strategies.

Modular 5'-UTR hexamers for context-independent tuning of protein expression in eukaryotes

Functional characterization of regulatory DNA elements in broad genetic contexts is a prerequisite for forward engineering of biological systems. Translation initiation site (TIS) sequences are attractive to use for regulating gene activity and metabolic pathway fluxes because the genetic changes are minimal. However, limited knowledge is available on tuning gene outputs by varying TISs in different genetic and environmental contexts. Here, we created TIS hexamer libraries in baker’s yeast Saccharomyces cerevisiae directly 5′ end of a reporter gene in various promoter contexts and measured gene activity distributions for each library. Next, selected TIS sequences, resulted in almost 10-fold changes in reporter outputs, were experimentally characterized in various environmental and genetic contexts in both yeast and mammalian cells. From our analyses, we observed strong linear correlations (R² = 0.75–0.98) between all pairwise combinations of TIS order and gene activity. Finally, our analysis enabled the identification of a TIS with almost 50% stronger output than a commonly used TIS for protein expression in mammalian cells, and selected TISs were also used to tune gene activities in yeast at a metabolic branch point in order to prototype fitness and carotenoid production landscapes. Taken together, the characterized TISs support reliable context-independent forward engineering of translation initiation in eukaryotes.

Discovery of the Agrobacterium growth inhibition sequence in virus and its application to recombinant clone screening

Infectious clone vectors used widely in genetic research. While constructing soybean mosaic virus (SMV) clone vectors, we found that transformed Agrobacterium grew significantly different depending on the viral strains used. In particular, the clone vectors constructed with SMV SC15 significantly suppressed the growth of Agrobacterium. Recombinant and truncated virus vector experiments showed that the polymorphism of a P1 protein coding sequence of SC15 leads to the growth inhibition of Agrobacterium. But the lack of other protein encoding sequences, except for the sequence encoding coat protein, should reduce the ability of SC15 to suppress Agrobacterium growth. A vector (pCB301-attL-SC15P) compatible with the Gateway cloning system was constructed using this Agrobacterium inhibitory sequence. The results from the LR recombination reaction with pCB301-attL-SC15P and Agrobacterium transformation showed the valuable application potential of the Agrobacterium inhibitory sequence to serve as a negative screening factor for effective recombinant clone screening in Agrobacterium.

Off-Pathway-Sensitive Protein-Splicing Screening Based on a Toxin/Antitoxin System

Protein‐splicing domains are frequently used engineering tools that find application in the in vivo and in vitro ligation of protein domains. Directed evolution is among the most promising technologies used to advance this technology. However, the available screening systems for protein‐splicing activity are associated with bottlenecks such as the selection of pseudo‐positive clones arising from off‐pathway reaction products or fragment complementation. Herein, we report a stringent screening method for protein‐splicing activity in cis and trans, that exclusively selects productively splicing domains. By fusing splicing domains to an intrinsically disordered region of the antidote from the Escherichia coli CcdA/CcdB type II toxin/antitoxin system, we linked protein splicing to cell survival. The screen allows selecting novel cis‐ and trans‐splicing inteins catalyzing productive highly efficient protein splicing, for example, from directed‐evolution approaches or the natural intein sequence space.

Evidence for embryonic haemoglobins from Sparus aurata under normal and hypoxic conditions

Teleost haemoglobins vary in polymorphisms and primary structure, although display similar functional properties. Key amino acids for Root effect (a reduction in oxygen-carrying capacity and loss of cooperativity with declining pH) are conserved throughout fish evolution. For the first time, we cloned and characterised Sparus aurata L. embryonic globin chains (eα1, eα2, eβ). We also studied haemoglobins (eHbI, eHbII) behaviour in normal and low-oxygen conditions. Several amino acids in fry globins are different in chemical type (e.g. polar → non-polar and vice versa), compared to adult globins. His55α1, crucial for Root effect, is substituted by Ala in fry, presumably enhancing oxygen capture, transport and reducing the dependence of Root effect from pH. Phylogenetic trees demonstrate that eα1 globin diversified more recently than eα2; moreover, eα1, eα2 and eβ globins evolved earlier than adult α and β globins. In low-oxygen conditions, fry haemoglobins display the same behaviour of the adult haemoglobins (probably, embryonic and adult-type I Hbs display a higher oxygen affinity than type II Hbs, operating through a rapid cycle of heme-Fe auto-oxidation/reduction). Therefore, based on our results and on the comparison with adult haemoglobins, we hypothesise that embryonic haemoglobins have evolved to better adapt fry to variable habitats. We studied Sparus aurata for its economical relevance in Mediterranean aquaculture. The information we provide can help understand Sparus aurata behaviour in the wild and in rearing conditions. Further studies with functional assays will deepen the knowledge on the molecular mechanisms of fry haemoglobin physiology.

A novel series of high-efficiency vectors for TA cloning and blunt-end cloning of PCR products

An efficient PCR cloning method is indispensable in modern molecular biology, as it can greatly improve the efficiency of DNA cloning processes. Here, I describe the development of three vectors for TA cloning and blunt-end cloning. Specifically, pCRT and pCRZeroT were designed to improve the efficiency of TA cloning. pCRZeroT can also be used with pCRZero to facilitate blunt-end cloning using the ccdB gene. Using pCRZero and pCRZeroT and applying the Golden Gate reaction, I developed a direct PCR cloning protocol with non-digested circular vectors and PCR products. This direct PCR cloning protocol yielded colony-formation rates and cloning efficiencies that are comparable with those obtained by conventional PCR cloning with pre-digested vectors and PCR products. The three plasmids I designed are available from Addgene (https://www.addgene.org/).

Development of a novel selection/counter-selection system for chromosomal gene integrations and deletions in lactic acid bacteria

Background

The underlying mechanisms by which probiotic lactic acid bacteria (LAB) enhance the health of the consumer have not been fully elucidated. Verification of probiotic modes of action can be achieved by using single- or multiple-gene knockout analyses of bacterial mutants in in vitro or in vivo models. We developed a novel system based on an inducible toxin counter-selection system, allowing for rapid and efficient isolation of LAB integration or deletion mutants. The Lactococcus lactis nisin A inducible promoter was used for expression of the Escherichia coli mazF toxin gene as counter-selectable marker.

Results

The flippase (FLP)/flippase recognition target (FRT) recombination system and an antisense RNA transcript were used to create markerless chromosomal gene integrations/deletions in LAB. Expression of NisR and NisK signalling proteins generated stable DNA integrations and deletions. Large sequences could be inserted or deleted in a series of steps, as demonstrated by insertion of the firefly bioluminescence gene and erythromycin resistance marker into the bacteriocin operons or adhesion genes of Lactobacillus plantarum 423 and Enterococcus mundtii ST4SA.

Conclusions

The system was useful in the construction of L. plantarum 423 and E. mundtii ST4SA bacteriocin and adhesion gene mutants. This provides the unique opportunity to study the role of specific probiotic LAB genes in complex environments using reverse genetics analysis. Although this work focuses on two probiotic LAB strains, L. plantarum 423 and E. mundtii ST4SA, the system developed could be adapted to most, if not all, LAB species.

Electronic supplementary material

The online version of this article (10.1186/s12867-019-0127-x) contains supplementary material, which is available to authorized users.

Overview of High-Throughput Cloning Methods for the Post-genomic Era

The advent of new DNA sequencing technologies leads to a dramatic increase in the number of available genome sequences and therefore of target genes with potential for functional analysis. The insertion of these sequences into proper expression vectors requires a simple an efficient cloning method. In addition, when expressing a target protein, quite often it is necessary to evaluate different DNA constructs to achieve a soluble and homogeneous expression of the target with satisfactory yields. The development of new molecular methods made possible the cloning of a huge number of DNA sequences in a high-throughput manner, necessary for meeting the increasing demands for soluble protein expression and characterization. In this chapter several molecular methods suitable for high-throughput cloning are reviewed.

Design and characterization of a synthetic minimal promoter for heterocyst-specific expression in filamentous cyanobacteria

Short and well defined promoters are essential for advancing cyanobacterial biotechnology. The heterocyst of Nostoc sp. is suggested as a microbial cell factory for oxygen sensitive catalysts, such as hydrogenases for hydrogen production, due to its microoxic environment. We identified and predicted promoter elements of possible significance through a consensus strategy using a pool of heterocyst-induced DIF⁺ promoters known from Anabaena sp. PCC 7120. To test if these conserved promoter elements were crucial for heterocyst-specific expression, promoter-yfp reporter constructs were designed. The characterization was accomplished by replacing, -35 and -10 regions and the upstream element, with well described elements from the trc promoter of Escherichia coli, which is also functional in Nostoc sp. From the in vivo spatial fluorescence of the different promoter-yfp reporters in Nostoc punctiforme ATCC 29133, we concluded that both the consensus -35 and extended -10 regions were important for heterocyst-specific expression. Further that the promoter strength could be improved by the addition of an upstream element. We designed a short synthetic promoter of 48 nucleotides, P_synDIF, including a consensus DIF1 sequence, a 17 base pair stretch of random nucleotides and an extended consensus -10 region, and thus generated the shortest promoter for heterocyst-specific expression to date.

The plasmid vectors, pBS2ndd and pBS3ndd, for versatile cloning with low background in Escherichia coli

For decades, diverse plasmid vectors have been continuously developed for molecular cloning of DNA fragment in the bacterial host cell Escherichia coli. Even with deliberate performances in vector preparation, the cloning approaches still face inevitable background colonies, or false positive clones, that may be arisen from intact or self-ligated plasmid molecules. To assist in such problem, two plasmids, pBS2ndd and pBS3ndd, which resistant to ampicillin and kanamycin respectively, were developed in this study as more advantageous cloning vector. The plasmids carry ndd, a lethal gene from bacteriophage T4 coding for nucleoid disruption protein that binds to the host chromosome and progressively kill the cell. The deadly toxicity of Ndd inhibits host cells that obtain intact or ndd-religated vector from growing, which results in low background and dramatically reduces the effort for selection of recombinants. Moreover, their identical multiple cloning site was designed to support various cloning strategies. Digestion of plasmids with XcmI allows for in vitro T/A ligation, while with EcoRV permits blunt-end ligation, with capability of blue-white colony screening. In vivo homologous recombination cloning is also utilizable by amplification of insert fragments using primers containing homology arms and transformation into capable E. coli strains. To demonstrate their advantages, the plasmids were used to clone PCR product samples for DNA sequencing with low-background and versatile cloning strategies. Such rapid and cost-effective cloning procedures are also proposed here. Finally, the cloning for protein expression with blue-white selection was also possible using egfp as a model regulated by lac and T7 promoters on the plasmid or other build-in promoters with the insert.

Building a genome engineering toolbox in nonmodel prokaryotic microbes

The realization of a sustainable bioeconomy requires our ability to understand and engineer complex design principles for the development of platform organisms capable of efficient conversion of cheap and sustainable feedstocks (e.g., sunlight, CO₂ , and nonfood biomass) into biofuels and bioproducts at sufficient titers and costs. For model microbes, such as Escherichia coli, advances in DNA reading and writing technologies are driving the adoption of new paradigms for engineering biological systems. Unfortunately, microbes with properties of interest for the utilization of cheap and renewable feedstocks, such as photosynthesis, autotrophic growth, and cellulose degradation, have very few, if any, genetic tools for metabolic engineering. Therefore, it is important to develop "design rules" for building a genetic toolbox for novel microbes. Here, we present an overview of our current understanding of these rules for the genetic manipulation of prokaryotic microbes and the available genetic tools to expand our ability to genetically engineer nonmodel systems.

Identification of Insertion Site by RESDA-PCR in Chlamydomonas Mutants Generated by AphVIII Random Insertional Mutagenesis

Chlamydomonas reinhardtii is frequently used as a model organism to study fundamental processes in photosynthesis, metabolism, and flagellar biology. Versatile tool boxes have been developed for this alga ( Fuhrmann et al., 1999 ; Schroda et al., 2000 ; Schroda, 2006). Among them, forward genetic approach has been intensively used, mostly because of the high efficiency in the generation of hundreds of thousands of mutants by random insertional mutagenesis and the haploid nature therefore phenotypic analysis can be done in the first generation ( Cagnon et al., 2013 ; Tunçay et al., 2013 ). A major bottleneck in the application of high throughput methods in a forward genetic approach is the identification of the genetic lesion(s) responsible for the observed phenotype. In this protocol, we describe in detail an improved version of the restriction enzyme site-directed amplification PCR (RESDA-PCR) originally reported in (González- Ballester et al., 2005 ). The improvement includes optimization of primer combination, the choice of DNA polymerase, optimization of PCR cycle parameters, and application of direct sequencing of the PCR products. These modifications make it easier to get specific PCR products as well as speeding up subcloning steps to obtain sequencing data faster.

A Novel Construction of Lentiviral Vectors for Eliminating Tumorigenic Cells from Pluripotent Stem Cells

The risk of tumor formation poses a challenge for human pluripotent stem cell (hPSC)-based transplantation therapy. Specific and total elimination of tumorigenic hPSCs by suicide genes (SGs) has not been achieved because no methodology currently exists for testing multiple candidate transgene constructs. Here, we present a novel method for efficient generation of tumorigenic cell-targeting lentiviral vectors (TC-LVs) with diverse promoters upstream of a fluorescent protein and SGs. Our two-plasmid system achieved rapid and simultaneous construction of different TC-LVs with different promoters. Ganciclovir (GCV) exerted remarkable cytotoxicity in herpes simplex virus thymidine kinase-transduced hPSCs, and high specificity for undifferentiated cells was achieved using the survivin promoter (TC-LV.Surv). Moreover, GCV treatment completely abolished teratoma formation by TC-LV.Surv-infected hPSCs transplanted into mice, without harmful effects. Thus, TC-LV can efficiently identify the best promoter and SG for specific and complete elimination of tumorigenic hPSCs, facilitating the development of safe regenerative medicine.

Construction of High-Quality Camel Immune Antibody Libraries

Single-domain antibodies libraries of heavy-chain only immunoglobulins from camelids or shark are enriched for high-affinity antigen-specific binders by a short in vivo immunization. Thus, potent binders are readily retrieved from relatively small-sized libraries of 10⁷-10⁸ individual transformants, mostly after phage display and panning on a purified target. However, the remaining drawback of this strategy arises from the need to generate a dedicated library, for nearly every envisaged target. Therefore, all the procedures that shorten and facilitate the construction of an immune library of best possible quality are definitely a step forward. In this chapter, we provide the protocol to generate a high-quality immune VHH library using the Golden Gate Cloning strategy employing an adapted phage display vector where a lethal ccdB gene has to be substituted by the VHH gene. With this procedure, the construction of the library can be shortened to less than a week starting from bleeding the animal. Our libraries exceed 10⁸ individual transformants and close to 100% of the clones harbor a phage display vector having an insert with the length of a VHH gene. These libraries are also more economic to make than previous standard approaches using classical restriction enzymes and ligations. The quality of the Nanobodies that are retrieved from immune libraries obtained by Golden Gate Cloning is identical to those from immune libraries made according to the classical procedure.

A highly efficient ligation-independent cloning system for CRISPR/Cas9 based genome editing in plants

BACKGROUND

Most current methods for constructing guide RNAs (gRNA) for the CRISPR/Cas9 genome editing system, depend on traditional cloning using specific type IIS restriction enzymes and DNA ligation. These methods consist of multiple steps of cloning, and are time consuming, resource intensive and not flexible. These issues are particularly exacerbated when multiple guide RNAs need to be assembled in one plasmid such as for multiplexing or for the paired nickases approach. Furthermore, identification of functional gRNA clones usually requires expensive in vitro screening. Addressing these issues will greatly facilitate usage and accessibility of CRISPR/Cas9 genome editing system to resource-limited laboratories.

RESULTS

To improve efficiency of cloning multiple guide RNAs for the CRISPR/Cas9 system, we developed a restriction enzyme- and ligation-independent strategy for cloning gRNAs directly in plant expression vectors in one step. Our method relies on a negative selection marker and seamless cloning for combining multiple gRNAs directly in a plant expression vector in one reaction. In addition, using the Agrobacterium-mediated transient assays, this method provides a simple in planta procedure for assaying the effectiveness of multiple gRNAs very rapidly.

CONCLUSIONS

For a fraction of resources used in the type IIS restriction enzyme-based cloning method and in vitro screening assays, the system reported here allows efficient construction and testing several ready-to-transfect gRNA constructs in < 3 days. In addition, this system is highly versatile and flexible, and by designing only two additional target-specific primers, multiple gRNAs can be easily assembled in any plasmid in a single reaction.

Mammalian cell surface display for monoclonal antibody-based FACS selection of viral envelope proteins

The elicitation of broadly and efficiently neutralizing antibodies in humans by active immunization is still a major obstacle in the development of vaccines against pathogens such as the human immunodeficiency virus (HIV), influenza virus, hepatitis C virus or cytomegalovirus. Here, we describe a mammalian cell surface display and monoclonal antibody (mAb)-mediated panning technology that allows affinity-based selection of envelope (Env) variants from libraries. To this end, we established an experimental setup featuring: 1) single and site specific integration of Env to link genotype and phenotype, 2) inducible Env expression to avoid cytotoxicity effects, 3) translational coupling of Env and enhanced green fluorescent protein expression to normalize for Env protein levels, and 4) display on HEK cells to ensure native folding and mammalian glycosylation. For proof of concept, we applied our method to a chimeric HIV-1 Env model library comprising variants with differential binding affinities to the V3-loop-directed mAbs 447–52D and HGN194. Fluorescence-activated cell sorting selectively enriched a high affinity variant up to 56- and 55-fold for 447–52D and HGN194, respectively, after only a single round of panning. Similarly, the low affinity variants for each antibody could be selectively enriched up to 237-fold. The binding profiles of membrane-bound gp145 and soluble gp140 chimeras showed identical affinity ranking, suggesting that the technology can guide the identification of Env variants with optimized antigenic properties for subsequent use as vaccine candidates. Finally, our mAb-based cellular display and selection strategy may also prove useful for the development of prophylactic vaccines against pathogens other than HIV.

Efficient Screening and Optimization of Membrane Protein Production in Escherichia coli

Escherichia coli is one of the most widely used expression hosts for membrane proteins. However, establishing conditions for its recombinant production of membrane proteins remains difficult. Attempts to produce membrane proteins frequently result in either no expression or expression as misfolded aggregates. We developed an efficient pipeline for improving membrane protein overexpression in E. coli that is based on two approaches. The first involves transcriptional fusions, small additional RNA sequences upstream of the target open reading frame, to overcome no or poor overall expression levels. The other is based on a tunable promoter in combination with a fusion to green fluorescent protein serving as a reporter for the folding state of the target membrane protein. The latter combination allows adjusting the membrane protein expression rate to the downstream folding capacity, in order to decrease the formation of protein aggregates. This pipeline has proven successful for the efficient and parallel optimization of a diverse set of membrane proteins.

An external substrate-free blue/white screening system in Escherichia coli

Since the lacZα-based blue/white screening system was introduced to molecular biology, several different visual reporter systems were developed and used for various purposes in Escherichia coli. A common limit to the existent visual reporter systems is that an extracellular chromogenic substrate has to be added for the visible pigment production. In this study, we developed a new blue/white screening system based on a non-ribosomal peptide synthetase encoded by idgS from Streptomyces and a phosphopantetheinyl transferase encoded by sfp from Bacillus. When IdgS is activated from an apo-form to a holo-form via a posttranslational modification catalyzed by Sfp, it can synthesize a blue pigment indigoidine using L-glutamine, the amino acid abundant in cells, as a substrate. The new blue/white screening system contains a recipient E. coli strain with an optimized idgS gene cassette and a cloning vector harboring an sfp gene with an in-frame insertion of a multiple cloning site close to its N-terminal. We demonstrated that the IdgS/Sfp-based blue/white screening system is a powerful alternative to the lacZα-based screening system, which does not require any external substrate addition.

Recombinant Protein Expression in E. coli : A Historical Perspective

This introductory chapter provides a brief historical survey of the key elements incorporated into commonly used E. coli-based expression systems. The highest impact in expression technology is associated with innovations that were based on extensively studied biological systems, and where the tools were widely distributed in the academic community.

Rapid high-throughput cloning and stable expression of antibodies in HEK293 cells

Single-cell based amplification of immunoglobulin variable regions is a rapid and powerful technique for cloning antigen-specific monoclonal antibodies (mAbs) for purposes ranging from general laboratory reagents to therapeutic drugs. From the initial screening process involving small quantities of hundreds or thousands of mAbs through in vitro characterization and subsequent in vivo experiments requiring large quantities of only a few, having a robust system for generating mAbs from cloning through stable cell line generation is essential. A protocol was developed to decrease the time, cost, and effort required by traditional cloning and expression methods by eliminating bottlenecks in these processes. Removing the clonal selection steps from the cloning process using a highly efficient ligation-independent protocol and from the stable cell line process by utilizing bicistronic plasmids to generate stable semi-clonal cell pools facilitated an increased throughput of the entire process from plasmid assembly through transient transfections and selection of stable semi-clonal cell pools. Furthermore, the time required by a single individual to clone, express, and select stable cell pools in a high-throughput format was reduced from 4 to 6months to only 4 to 6weeks.

NaLi-H1: A universal synthetic library of humanized nanobodies providing highly functional antibodies and intrabodies

In vitro selection of antibodies allows to obtain highly functional binders, rapidly and at lower cost. Here, we describe the first fully synthetic phage display library of humanized llama single domain antibody (NaLi-H1: Nanobody Library Humanized 1). Based on a humanized synthetic single domain antibody (hs2dAb) scaffold optimized for intracellular stability, the highly diverse library provides high affinity binders without animal immunization. NaLi-H1 was screened following several selection schemes against various targets (Fluorescent proteins, actin, tubulin, p53, HP1). Conformation antibodies against active RHO GTPase were also obtained. Selected hs2dAb were used in various immunoassays and were often found to be functional intrabodies, enabling tracking or inhibition of endogenous targets. Functionalization of intrabodies allowed specific protein knockdown in living cells. Finally, direct selection against the surface of tumor cells produced hs2dAb directed against tumor-specific antigens further highlighting the potential use of this library for therapeutic applications.

DOI:http://dx.doi.org/10.7554/eLife.16228.001

Antibodies are proteins that form part of an animal’s immune system and can identify and help eradicate infections. These proteins are also needed at many stages in biological research and represent one of the most promising tools in medical applications, from diagnostics to treatments.

Traditionally, antibodies have been collected from animals that had been previously injected with a target molecule that the antibodies must recognize. An alternative strategy that uses bacteria and bacteria-infecting viruses instead of animals was developed several decades ago and allows researchers to obtain antibodies more quickly. However, the majority of the scientific community view these “in vitro selected antibodies” as inferior to those produced via the more traditional approach.

Moutel, Bery et al. set out to challenge this widespread opinion, using a smaller kind of antibody known as nanobodies. The proteins were originally found in animals like llamas and camels and are now widely used in biological research. One particularly stable nanobody was chosen to form the backbone of the in vitro antibodies, and the DNA that encodes this nanobody was altered to make the protein more similar to human antibodies. Moutel, Bery et al. then changed the DNA sequence further to make billions of different versions of the nanobody, each one slightly different from the next in the region that binds to the target molecules.

Transferring this DNA into bacteria resulted in a library (called the NaLi-H1 library) of bacterial clones that produce the nanobodies displayed at the surface of bacteria-infecting viruses. Moutel, Bery et al. then screened this library against various target molecules, including some from tumor cells, and showed that the fully in vitro selected antibodies worked just as well as natural antibodies in a number of assays. The in vitro antibodies could even be used to track, or inactivate, proteins within living cells.

The NaLi-H1 library will help other researchers obtain new antibodies that bind strongly to their targets. The approaches developed to create the library could also see more people decide to create their own synthetic libraries, which would accelerate the identification of new antibodies in a way that is cheaper and requires fewer experiments to be done using animals. These in vitro selected antibodies could help to advance both fundamental and medical research.

DOI:http://dx.doi.org/10.7554/eLife.16228.002

Use of the human hepcidin gene to build a positive-selection vector for periplasmic expression in Escherichia coli

Recombinant proteins are often produced in the periplasm of Escherichia coli because this facilitates the purification process. The oxidizing environment favors the formation of disulfide bridges. We showed that the periplasmic expression of the human hormone hepcidin 25 (Hep25) fused to the maltose-binding protein (MBP) resulted in cell death. This toxicity was not observed when MBP-Hep25 accumulated in the bacterial cytoplasm, or when Hep25 was addressed to the periplasm without the MBP tag. We then modified the periplasmic expression vector pMALp2E to create pMALp2EH, a positive-selection vector with Hep25 as counterselection gene.

Optogenetic control of nuclear protein export

Active nucleocytoplasmic transport is a key mechanism underlying protein regulation in eukaryotes. While nuclear protein import can be controlled in space and time with a portfolio of optogenetic tools, protein export has not been tackled so far. Here we present a light-inducible nuclear export system (LEXY) based on a single, genetically encoded tag, which enables precise spatiotemporal control over the export of tagged proteins. A constitutively nuclear, chromatin-anchored LEXY variant expands the method towards light inhibition of endogenous protein export by sequestering cellular CRM1 receptors. We showcase the utility of LEXY for cell biology applications by regulating a synthetic repressor as well as human p53 transcriptional activity with light. LEXY is a powerful addition to the optogenetic toolbox, allowing various novel applications in synthetic and cell biology.

Overview of Post Cohen-Boyer Methods for Single Segment Cloning and for Multisegment DNA Assembly

In 1973, Cohen and coworkers published a foundational paper describing the cloning of DNA fragments into plasmid vectors. In it, they used DNA segments made by digestion with restriction enzymes and joined these in vitro with DNA ligase. These methods established working recombinant DNA technology and enabled the immediate start of the biotechnology industry. Since then, "classical" recombinant DNA technology using restriction enzymes and DNA ligase has matured. At the same time, researchers have developed numerous ways to generate large, complex, multisegment DNA constructions that offer advantages over classical techniques. Here, we provide an overview of "post-Cohen-Boyer" techniques used for cloning single segments into vectors (T/A, Topo cloning, Gateway and Recombineering) and for multisegment DNA assembly (BioBricks, Golden Gate, Gibson, yeast homologous recombination in vivo, and ligase cycling reaction). We compare and contrast these methods and also discuss issues that researchers should consider before choosing a particular multisegment DNA assembly method. © 2016 by John Wiley & Sons, Inc.

Precision-engineering the Pseudomonas aeruginosa genome with two-step allelic exchange

Allelic exchange is an efficient method of bacterial genome engineering. This protocol describes the use of this technique to make gene knockouts and knock-ins, as well as single-nucleotide insertions, deletions and substitutions, in Pseudomonas aeruginosa. Unlike other approaches to allelic exchange, this protocol does not require heterologous recombinases to insert or excise selective markers from the target chromosome. Rather, positive and negative selections are enabled solely by suicide vector-encoded functions and host cell proteins. Here, mutant alleles, which are flanked by regions of homology to the recipient chromosome, are synthesized in vitro and then cloned into allelic exchange vectors using standard procedures. These suicide vectors are then introduced into recipient cells by conjugation. Homologous recombination then results in antibiotic-resistant single-crossover mutants in which the plasmid has integrated site-specifically into the chromosome. Subsequently, unmarked double-crossover mutants are isolated directly using sucrose-mediated counter-selection. This two-step process yields seamless mutations that are precise to a single base pair of DNA. The entire procedure requires ∼2 weeks.

Development of a markerless gene deletion system for Bacillus subtilis based on the mannose phosphoenolpyruvate-dependent phosphotransferase system

To optimize Bacillus subtilis as a production strain for proteins and low molecular substances by genome engineering, we developed a markerless gene deletion system. We took advantage of a general property of the phosphoenolpyruvate-dependent phosphotransferase system (PTS), in particular the mannose PTS. Mannose is phosphorylated during uptake by its specific transporter (ManP) to mannose 6-phosphate, which is further converted to fructose 6-phosphate by the mannose-6-phosphate isomerase (ManA). When ManA is missing, accumulation of the phosphorylated mannose inhibits cell growth. This system was constructed by deletion of manP and manA in B. subtilis Δ6, a 168 derivative strain with six large deletions of prophages and antibiotic biosynthesis genes. The manP gene was inserted into an Escherichia coli plasmid together with a spectinomycin resistance gene for selection in B. subtilis. To delete a specific region, its up- and downstream flanking sites (each of approximately 700 bp) were inserted into the vector. After transformation, integration of the plasmid into the chromosome of B. subtilis by single cross-over was selected by spectinomycin. In the second step, excision of the plasmid was selected by growth on mannose. Finally, excision and concomitant deletion of the target region were verified by colony PCR. In this way, all nine prophages, seven antibiotic biosynthesis gene clusters and two sigma factors for sporulation were deleted and the B. subtilis genome was reduced from 4215 to 3640 kb. Despite these extensive deletions, growth rate and cell morphology remained similar to the B. subtilis 168 parental strain.

One cannot rule them all: Are bacterial toxins-antitoxins druggable?

Type II (proteic) toxin–antitoxin (TA) operons are widely spread in bacteria and archaea. They are organized as operons in which, usually, the antitoxin gene precedes the cognate toxin gene. The antitoxin generally acts as a transcriptional self-repressor, whereas the toxin acts as a co-repressor, both proteins constituting a harmless complex. When bacteria encounter a stressful environment, TAs are triggered. The antitoxin protein is unstable and will be degraded by host proteases, releasing the free toxin to halt essential processes. The result is a cessation of cell growth or even death. Because of their ubiquity and the essential processes targeted, TAs have been proposed as good candidates for development of novel antimicrobials. We discuss here the possible druggability of TAs as antivirals and antibacterials, with focus on the potentials and the challenges that their use may find in the ‘real’ world. We present strategies to develop TAs as antibacterials in view of novel technologies, such as the use of very small molecules (fragments) as inhibitors of protein–protein interactions. Appropriate fragments could disrupt the T:A interfaces leading to the release of the targeted TA pair. Possible ways of delivery and formulation of Tas are also discussed.

We consider various approaches to develop the toxins of the type II family as possible candidates to drug discovery; druggability of toxins-antitoxins could be possible as antivirals. As antibacterials, they might be considered as druggable but delivery and formulation may not be simple so far.

Efficient generation of recombinant influenza A viruses employing a new approach to overcome the genetic instability of HA segments

Influenza A viruses (IAVs) are the most relevant and continual source of severe infectious respiratory complications in humans and different animal species, especially poultry. Therefore, an efficient vaccination that elicits protective and neutralizing antibodies against the viral hemagglutinin (HA) and neuraminidase (NA) is an important strategy to counter annual epidemics or occasional pandemics. With the help of plasmid-based reverse genetics technology, it is possible that IAV vaccine strains (IVVS) are rapidly generated. However, the genetic instability of some cloned HA-cDNAs after transformation into competent bacteria represents a major obstacle. Herein, we report efficient cloning strategies of different genetically volatile HA segments (H5- and H9-subtypes) employing either a newly constructed vector for reverse genetics (pMKPccdB) or by the use of the Escherichia coli strain HB101. Both approaches represent improved and generalizable strategies to establish functional reverse genetics systems preventing genetic changes to the cloned (HA) segments of IAV facilitating more efficient rescue of recombinant IAV for basic research and vaccine development.

Molecular cloning using polymerase chain reaction, an educational guide for cellular engineering

Background

Over the last decades, molecular cloning has transformed biological sciences. Having profoundly impacted various areas such as basic science, clinical, pharmaceutical, and environmental fields, the use of recombinant DNA has successfully started to enter the field of cellular engineering. Here, the polymerase chain reaction (PCR) represents one of the most essential tools. Due to the emergence of novel and efficient PCR reagents, cloning kits, and software, there is a need for a concise and comprehensive protocol that explains all steps of PCR cloning starting from the primer design, performing PCR, sequencing PCR products, analysis of the sequencing data, and finally the assessment of gene expression. It is the aim of this methodology paper to provide a comprehensive protocol with a viable example for applying PCR in gene cloning.

Results

Exemplarily the sequence of the tdTomato fluorescent gene was amplified with PCR primers wherein proper restriction enzyme sites were embedded. Practical criteria for the selection of restriction enzymes and the design of PCR primers are explained. Efficient cloning of PCR products into a plasmid for sequencing and free web-based software for the consecutive analysis of sequencing data is introduced. Finally, confirmation of successful cloning is explained using a fluorescent gene of interest and murine target cells.

Conclusions

Using a practical example, comprehensive PCR-based protocol with important tips was introduced. This methodology paper can serve as a roadmap for researchers who want to quickly exploit the power of PCR-cloning but have their main focus on functional in vitro and in vivo aspects of cellular engineering.

Electronic supplementary material

The online version of this article (doi:10.1186/1754-1611-9-2) contains supplementary material, which is available to authorized users.