Comparison of different techniques for the analysis of metallothionein isoforms by capillary electrophoresis

Fluorescence-tagged metallothionein with CdTe quantum dots analyzed by the chip-CE technique

ABSTRACT

Quantum dots (QDs) are fluorescence nanoparticles (NPs) with unique optic properties which allow their use as probes in chemical, biological, immunological, and molecular imaging. QDs linked with target ligands such as peptides or small molecules can be used as tumor biomarkers. These particles are a promising tool for selective, fast, and sensitive tagging and imaging in medicine. In this study, an attempt was made to use QDs as a marker for human metallothionein (MT) isoforms 1 and 2. Four kinds of CdTe QDs of different sizes bioconjugated with MT were analyzed using the chip-CE technique. Based on the results, it can be concluded that MT is willing to interact with QDs, and the chip-CE technique enables the observation of their complexes. It was also observed that changes ranging roughly 6-7 kDa, a value corresponding to the MT monomer, depend on the hydrodynamic diameters of QDs; also, the MT sample without cadmium interacted stronger with QDs than MT saturated with cadmium. Results show that MT is willing to interact with smaller QDs (blue CdTe) rather than larger ones QDs (red CdTe). To our knowledge, chip-CE has not previously been applied in the study of CdTe QDs interaction with MT.

GRAPHICAL ABSTRACT

Modern bioanalysis of proteins by electrophoretic techniques

In 1957, protein rich in cysteine able to bind cadmium was isolated from horse kidney and named as metallothionein according to its structural properties. Further, this protein and metallothionein-like proteins have been found in tissues of other animal species, yeasts, fungi and plants. MT is as a potential cancer marker in the focus of interest, and its properties, functions, and behavior under various conditions are intensively studied. Our protocol describes separation of two major mammalian isoforms of MT (MT-1 and MT-2) using capillary electrophoresis (CE) coupled with UV detector. This protocol enables separation of MT isoforms and studying of their basic behavior as well as their quantification with detection limit in units of ng per μL. Sodium borate buffer (20 mM, pH 9.5) was optimized as a background electrolyte, and the separation was carried out in fused silica capillary with internal diameter of 75 μm and electric field intensity of 350 V/cm. Optimal detection wavelength was 254 nm.

Metallothionein-2 gene from the mandarin fish Siniperca chuatsi: cDNA cloning, tissue expression, and immunohistochemical localization

The metallothionein-2 (MT-2) gene was isolated from the mandarin fish, one of the most important industrial aquatic animals in China, by using rapid amplification of cDNA ends (RACE). The deduced amino acid sequence of MT-2 comprised 60 amino acids and showed approximately 62.3% identity to human metallothionein. Its promoter region was amplified by thermal asymmetric interlaced polymerase chain reaction (TAIL-PCR). The MT-2 gene consists of 3 exons and 2 introns, extending approximately 900 bp of genomic sequence. Phylogenetic analysis clearly demonstrated that MT-2 formed a clade with fish metallothionein. The promoter region contained 5 putative metal-regulatory elements (MREs) and 1 TATA box. Real-time quantitative RT-PCR analysis revealed that MT-2 transcripts were significantly increased in the brain and gills and were stable in the muscles, liver, and trunk kidney in Cd(2+)-stimulated fish. Western blotting analysis demonstrated that the protein of the MT-2 gene was expressed mainly in the gills, liver, heart, trunk kidney, muscle, and intestine; it was weakly detected in the brain and head kidney. Moreover, the MT-2 protein was immunohistochemically detected in the cytoplasm in the liver and trunk kidney. All the above results revealed that the mandarin fish MT-2 would be a useful biomarker for metal pollution.

Separation and characterization of rabbit liver apothioneins by capillary electrophoresis coupled to electrospray ionization time-of-flight mass spectrometry

The present study establishes a method for the separation and characterization of rabbit liver metallothionein (MT) subisoforms by capillary electrophoresis coupled to electrospray ionization time-of-flight mass spectrometry (CE-ESI-TOF-MS) via a sheath-flow interface. Directly coupled-CE-MS enables the extraction of specific molecular weight information and thereby facilitates the identification of peaks when no reference materials are available, as in the case of MT subisoforms. The analysis described here revealed the presence of the apothioneins MT-1a, MT-2d, and MT-2e, belonging to MT-I sample, and MT-2a, MT-2b, and MT-2c, belonging to MT-II. Several non-N-acetylated forms were also detected as traces appearing with their respective acetylated forms in both samples. Similar results were found when MALDI-TOF experiments were performed, identifying all the sequenced rabbit liver MTs as apo-MT-forms, as in the CE-ESI-MS coupling.

Quantitative structure property relationship study of the electrophoretic mobilities of some benzoic acids derivatives in different carrier electrolyte compositions

Quantitative structure-properties relationship (QSPR) has been applied to modeling and predicting the electrophoretic mobilities of a series of benzoic acid derivatives in different carrier electrolyte composition. Descriptors that were selected by stepwise multiple linear regression (MLR) technique are radial distribution function-lag8 (RDF-8), unweighted R-maximal autocorrelation geometry, topology and atomic weight assembly-lag4 (R-GETAWAY-4), geometrical descriptor lag-26 (GEO-26), and the overall dielectric constant of the carrier electrolyte. These descriptors were used as inputs for generated 4-7-1 artificial neural network (ANN). The results obtained using ANN and MLR were compared as well as with the experimental values and showed the superiority of ANN over MLR model. Also the appearance of these descriptors in QSPR models reveals the role of electronic and steric interactions in solutes mobility in capillary electrophoresis due to the dielectric and hydrodynamic friction forces.

Implication of the differential roles of metallothionein 1 and 2 isoforms in the liver of rats as determined by polyacrylamide-coated capillary zone electrophoresis

Metallothioneins (MTs), determined by polyacrylamide-coated capillary zone electrophoresis (CZE), coincided well with those described by enzyme-linked immunosorbent assay. By using CZE, MT isoforms 1 (MT-1) and 2 (MT-2) were well separated and determined in the liver cytosol of LEC rats and Wistar rats administered CdCl(2). The total concentrations of MTs in the liver cytosol of LEC rats increased age-dependently as 1.0, 2.1, and 7.2mg/g wet weight of the liver at the age of 5, 10, and 15 weeks, respectively, and those of Wistar rats that had received daily CdCl(2) also increased with time of CdCl(2) as 0.5 and 1.2mg/g wet weight of the liver for 3 and 6 consecutive administration days, respectively. The MT-1/MT-2 ratio in the liver cytosol of LEC rats decreased age-dependently as 1.75, 1.49, and 0.76 at the age of 5, 10, and 15 weeks, respectively. In contrast, that of Wistar rats increased with time of exposure to the metal ion CdCl(2) as 1.1 and 1.6 for 3 and 6 administration days, respectively. Copper accumulation in the liver of LEC rats has already been reported. The present results indicated that the mechanism of the induction of MT synthesis differs between LEC rats, who lack ATP7B, and Wistar rats, who were given a toxic metal ion. On the basis of these results, we propose that MT-1 is related to the metabolism or detoxification of toxic metals such as Cd, and in contrast, MT-2 is responsible for the homeostasis of essential metals such as Cu.

Characterization of metallothionein isoforms from rabbit liver by liquid chromatography coupled to electrospray mass spectrometry

Metallothioneins (MTs), a group of low molecular weight proteins found in practically all life forms, are characterized by high sulfur content and an affinity for metal ions. At acidic pH, MTs show metal depletion, leading to apothioneins. In the work described here, in order to optimize the separation of rabbit liver apothioneins using liquid chromatography (LC) with UV detection, the proportion of the organic modifier of the mobile phase was optimized by establishing relationships between Reichardt's E(N)(T) scale of solvent polarity and the chromatographic retention measured by the capacity factor, k. Additionally, such optimum separations were carried out in a LC-electrospray mass spectrometry (ES-MS) coupled system allowing the identification and characterization of the different rabbit liver apo-MT-forms. In this way, electrospray ionization mass spectrometry offers great possibilities aiming at a better understanding of metallothionein polymorphism.

CZE-ICP-MS separation of metallothioneins in human brain cytosols: comparability of electropherograms obtained from different sample matrices

Capillary zone electrophoresis, with its high resolution capability in the separation of different compounds, is well suited for the investigation of metal-containing proteins, especially when elemental detection is conducted using hyphenated inductively coupled plasma-mass spectrometry. A major problem in the separation of proteins in body fluids is caused by the effects of different sample matrix composition. The migration time of proteins varies significantly, depending on the nature of the matrix. Electropherograms are consequently difficult to compare and the peak identification is uncertain. Pre-analytical steps for the reduction of matrix compounds enhance the quality of the data, but the results are still unsatisfactory. This paper describes a technique for obtaining electropherograms that can be used for comparison purposes by correction of the data with the aid of time markers. A mixture of five substances (caesium chloride, arsenocholine, arsenobetaine, dimethylarsinic acid and monomethylarsonic acid) was added in a separate injection step. Ionic caesium eluted at the start of the separation and the other four markers appeared throughout and at the end of the electropherogram. All electropherograms were normalized to a reference run by recalculation of the time axis using the time markers. The method was applied to the analysis of human brain cytosols. Samples were separated after different pre-treatment steps and were compared, with special emphasis on the detection of the isoform metallothionein-3.

Identification of a Metallothionein in Synechococcus by Capillary Electrophoresis Hyphenated with Inductively Coupled Plasma Mass Spectrometry

A home-made system hyphenating capillary electrophoresis with an inductively coupled plasma mass spectrometer (CE-ICP-MS) for cadmium speciation of protein-binding and free cadmium ions in solution is presented. The CE-ICP-MS interface consisted of an acrylic block with an internal volume ca. 20 microL in which a platinum electrode, a capillary column, and a connection to an ICP nebulizer were inserted. A make-up electrolyte solution containing 50 mmol L(-1) Tris-HCl buffer solution (pH 9.0) was continuously flowed through the interface to the ICP nebulizer. The separation of free Cd ions, Cd-cysteine, and Cd bounded to metallothionein (MT) isoforms from rabbit liver was carried out by capillary electrophoresis, and the analytes were detected by ICP-MS. The feasibility to isolate metallothionein compounds extracted from the cyanobacterium Synechococcus PCC7942 was demonstrated. The Cd binding proteins were induced in Synechococcus PCC7942 and further analyzed by CE ICP-MS.

Study of metallothionein using capillary zone electrophoresis

Metallothioneins (MTs) have many different functions in tissues, but the roles of individual isoforms are still not entirely clear. Capillary zone electrophoresis (CZE) is a powerful method for the separation of substances because of its small sample requirement, rapid analysis, high sensitivity and high resolution. The separation and identification of mammalian MT-1, MT-2, and MT-3 and class III MTs by CZE has been reported. Uncoated and polyacrylamide-coated capillary tubes were recently used for the separation of MTs, and a UV detector is usually employed for observations of peaks of MTs. Small changes to the structure and metal components of MTs are reflected in the migration times of the peaks. N-acetylated and non-acetylated MTs can be separated and identified by CZE-mass spectrometry (MS). In addition, metal complexes with MTs can be characterized by CZE-proton-induced X-ray emission (PIXE) detector and CZE-inductively coupled plasma (ICP)-MS. For the quantification of an MT isoform, the peak area of UV absorption is used, but the technique has problems. One is lack of a purified isoform standard. The other is the need for a suitable internal standard substance. CZE-ICP-isotope dilution (ID)-MS is also reported to be able to quantify MT isoforms. CZE combined with other techniques is very effective for separation and quantitative and qualitative analyses of MT isoforms in biological materials.

Determination of metallothionein-1/metallothionein-2 ratios in the mouse liver and pancreas by capillary zone electrophoresis using a polyacrylamide-coated capillary at neutral pH

Metallothionein (MT) isoforms, MT-1 and MT-2, in biological specimens are clearly separated by capillary zone electrophoresis (CZE) using a polyacrylamide-coated capillary. The effectiveness of CZE analysis in the study of MT isoforms in biological specimens is discussed. We did two experiments to determine the MT-1/MT-2 ratio in biological specimens. The ratio of MT-1/MT-2 can be determined by CZE under a neutral pH without any detergents. One of these studies is time-dependent changes of the MT-1/MT-2 ratio in the cytosol of the pancreas and liver in mice after Zn or Cd injection. In the pancreas, both isoforms were detected in the control mice and the ratio of MT-1/MT-2 was below 1.0. When Zn was injected, the maximum peak areas of both isoforms were obtained at 24 h, and the ratios increased over a value of 1.0 at 3 h and peaked at 10 h. However, in the Cd-injected mice, the peak areas of both isoforms increased up to 72 h, and the ratios were below 1.0 up to 72 h. On the contrary, neither isoform was detected in the livers of control mice. The ratios of Zn-injected mice liver were near the value 1.0 between 6 and 72 h, although the areas of both isoforms showed peaks at 48 h. The ratios of Cd-injected mice livers were detected to be over 1.0 from 10 h, but there were no significant difference between 10 and 72 h, and the areas of both isoforms showed peaks at 24 h. The other experiment investigated the ratio in each fraction of cell fractionation. Cell fractionation was done in the livers of Zn-treated mice. Twenty-four hours after the injection, the ratio of MT-1/MT-2 was 0.80+/-0.12 and 1.19+/-0.21 (mean+/-SD) in nuclear and cytosol fractions, respectively. Neither isoform was detected in mitochondrial or microsomal fraction. From the present results, CZE analysis is a suitable method for observation of the ratio of MT-1/MT-2 in biological specimens, and dynamic changes in both isoforms can be detected.

Use of surface-modified capillaries in the separation and characterization of metallothionein isoforms by capillary electrophoresis inductively coupled plasma mass spectrometry

The separation of metallothionein (ML) isoforms using capillary electrophoresis (CE) has been improved by applying surface-modified capillaries, and the metal composition of MTs has been characterized by subsequent inductively coupled plasma sector field mass spectrometry (ICPSFMS). Nine MT complexes in a commercial preparation from rabbit liver were successfully separated on an anionic polymer-coated column, prepared by immobilizing poly(2-acrylamido-2-methyl-1-propanesulfonic acid) on the fused-silica surface via a linking agent. On uncoated capillaries or those coated dynamically with cationic materials, only three complexes could be separated. Online isotope dilution analysis combined with CE/ICPSFMS indicated the stoichiometric molar metal contents in the MT complexes.

Rapid identification of metallothionein isoforms in liver cytosol fraction by capillary zone electrophoresis using EDTA

Identification of metallothionein (MT) isoforms on capillary zone electrophoresis (CZE) analysis was studied using a linear polyacrylamide-coated capillary at pH 7.4 and EDTA. The CZE system was able to separate standard (purified and commercially available) MT specimens into their isoforms within 10 min. The peaks of MT-1 and MT-2 isoforms disappeared on addition of EDTA to the specimen, and the disappearance was shown to be time-dependent and dose-dependent, although the reason why the peaks decreased is still unclear. A heat-treated cytosol fraction prepared from Zn-injected mouse liver showed many major and minor peaks on CZE analysis. Two major peaks were identified to be MT-1 and MT-2, respectively, by co-injection with the purified MT isoforms. When EDTA was added to the cytosol fraction, the two major peaks, MT-1 and MT-2, and three other minor peaks disappeared time-dependently. Therefore, each MT isoform in the cytosol fraction can be identified by the addition of EDTA, also the peaks are identified by the corresponding migration times of purified MTs. Unknown substances like MT sub-isoforms may also be detected, although this question warrants clarification. From these results, it was concluded that the addition of EDTA is useful for identification of MT isoforms in cytosol fractions on CZE analysis.

Analysis of metallothioneins by means of capillary electrophoresis coupled to electrospray mass spectrometry with sheathless interfacing

Capillary electrophoresis (CE) coupled to electrospray mass spectrometry via sheathless interfacing has been applied to the analysis of mammalian metallothionein (MT) extracts. In a rabbit-liver extract, four (MT-2C, MT-2A, MT-2D and MT-2E) out of six known MT sub-isoforms were unambiguously identified under three CE-resolved peaks. A fourth peak was found to contain MT-1A and/or MT-2B, whose molecular masses differ by only 1 Da. Traces of non-N-acetylated MT-2D and MT-2E were observed in a fifth, minor peak. In a rat-liver extract, both MT-1 and MT-2 were resolved and identified. Non-N-acetylated MT-2 was also identified in a resolved, minor peak. Minimum detectable amounts of MTs have been estimated to be approximately 0.6 fmol per sub-isoform.

Detection of metallothionein isoforms from three different species using on-line capillary electrophoresis-mass spectrometry

An on-line capillary electrophoresis-mass spectrometry method (CE-MS) for the detection of metallothionein (MT) isoforms is described. The detected masses were usually within 1-1.5 mass units of the expected molecular weights. MT-containing samples from rabbit, sheep, and yeast (Saccharomyces cerevisiae) were subjected to CE-MS analysis. The analysis of rabbit liver MT revealed the masses of 10 proteins/peptides. Five of the detected masses corresponded well with the expected masses calculated from the amino acid sequence of previously described MT isoforms, one was suspected to be a deacetylated form of MT-2A, one was presumed to be a yet unknown isoform, and three masses were classified as non-MT compounds. From the analysis of a fetal sheep liver extract six proteins were detected of which three masses corresponded to previously described MT isoforms. Two purified MT subforms from S. cerivisiae (encoded by the CUP1 locus) were analyzed for their copper content and both forms were found to contain eight copper atoms per molecule.

Analysis of recombinant human platelet-derived growth factor by reversed-charge capillary zone electrophoresis

Reversed-charge capillary zone electrophoresis (RC-CZE) has been developed as a clipping (proteolysis) assay for homodimeric protein recombinant human platelet-derived growth factor (rhPDGF-BB), a major serum mitogenic factor involved in subcutaneous wound healing. When expressed in yeast, the protein is excreted as a fully folded homodimeric protein consisting of two antiparallel B chains held together by two interchain disulfide bonds. During fermentation, internal proteolysis (clipping between residues Arg32 and Thr33) and C-terminal truncation (Arg32 and Thr109) may occur. Internal proteolysis yields three potential forms of rhPDGF-BB: intact (both B chains are intact), single-clipped (one B chain is clipped), and double-clipped (both B chains are clipped). Clipping also creates new C-terminal sites for further C-terminal truncations and leads to a very complex mixture of isoforms. Routine baseline resolution of these three forms by various modes of HPLC proved unsuccessful. When the disulfide bonds of antiparallel chains are reduced, the complex peptide mixture can be analyzed by RP-HPLC; however, only the level of total clipping is identified. Since RC-CZE separation relies upon differences in molecular charge/size ratio, it can resolve the three rhPDGF-BB forms differing in the additional exposed residues. The choice of reversed-charge CZE columns (amine-coated column) allows proteins of high pI such as rhPDGF-BB (pI > 10) to be readily analyzed while minimizing protein loss from column adsorption. To simplify the electropherogram of clipped forms, the sample is treated first with carboxypeptidase B to reduce the charge microheterogeneity of partial Arg32 truncation. Analysis of rhPDGF-BB by RC-CZE yields a baseline separation between the three forms, intact and single- and double-clipped rhPDGF-BB.

Determination of naproxen in liver and kidney tissues by electrokinetic capillary chromatography with laser-induced fluorescence detection

Pharmacotherapy through the targeting of drugs is a promising new approach that requires adequate analytical methods capable of monitoring the free drug, the drug carrier and metabolites in body fluids and organs. A micellar electrokinetic capillary chromatography (MECC) based assay for analysis of naproxen (NAP) in extracts of hydrolyzed liver and kidney tissue homogenates using salicylate as internal standard and solute detection by laser-induced fluorescence is reported. The assay described uses 100 microliters of hydrolyzed tissue homogenate and has a detection limit of 0.07 microgram/ml. It is shown to be selective, reproducible (at a NAP level of 0.25 microgram/ml, intra-day and inter-day R.S.D. values are 3.73% and 6.39%, respectively), simple and economical (operates with inexpensive separation columns and small amounts of chemicals). It has been successfully applied to the assessment of the total NAP content within liver and kidney tissues of male Sprague Dawley rats that have been treated with NAP conjugated to human serum albumin (the drug targeting carrier) and free NAP. Compared to previously applied techniques, including high-performance liquid chromatography, MECC offers the advantage of having lower running costs and lower consumption of organic solvents.

On-line solid-phase extraction-capillary electrophoresis for enhanced detection sensitivity and selectivity: application to the analysis of metallothionein isoforms in sheep fetal liver

A simple and rapid capillary electrophoresis (CE) method for analysis of metallothionein (MT) isoforms is described. A modified two-step solvent extraction procedure was used in combination with CE and an on-line solid-phase preconcentration device for sensitive and reproducible detection of MT isoforms in sheep fetal liver. Preparation of twenty samples was practicable within a working day with subsequent automated overnight analysis by solid-phase extraction (SPE)-CE. A commercially available divinylbenzene-based reversed-phase resin was found to be most suitable for the SPE device because it is resistant to extremes of pH and can be adequately regenerated between analyses. Each SPE device was readily constructed from commonly available materials and was used for the reproducible separation of over 100 biological samples before replacement. Precision of analysis within or between sample batches was < 10% and usually < 5% while detection limits were at least 28 ng/ml for standards and 272 ng/ml for biological samples. This would indicate a detection limit of about 0.5 microgram/g wet weight of tissue. Recovery of MT from tissue cytosols by solvent extraction was measured using radiolabeled MT and was found to be just over 50% increasing to almost 70% by addition of NaCl to the homogenisation buffer. The combined solvent extraction and SPE-CE methodology was applied to the analysis of MT in sheep fetal liver and the results compared favorably with those obtained by high-resolution chromatography. MT-1 levels were 2 to 4-times higher than those of MT-2 and both isoforms decreased from day 89 to day 136 of gestation. These results were compared with MT levels in fetal liver from sheep embryos that had been perturbed by temporary transfer to an advanced uterine environment. Hepatic MT levels at day 136 of gestation were 3 to 8-times higher than in normal fetal liver and significant differences were observed with both isoforms.

New approaches in clinical chemistry: on-line analyte concentration and microreaction capillary electrophoresis for the determination of drugs, metabolic intermediates, and biopolymers in biological fluids

The use of capillary electrophoresis (CE) for clinically relevant assays is attractive since it often presents many advantages over contemporary methods. The small-diameter tubing that holds the separation medium has led to the development of multicapillary instruments, and simultaneous sample analysis. Furthermore, CE is compatible with a wide range of detectors, including UV-Vis, fluorescence, laser-induced fluorescence, electrochemistry, mass spectrometry, radiometric, and more recently nuclear magnetic resonance, and laser-induced circular dichroism systems. Selection of an appropriate detector can yield highly specific analyte detection with good mass sensitivity. Another attractive feature of CE is the low consumption of sample and reagents. However, it is paradoxical that this advantage also leads to severe limitation, namely poor concentration sensitivity. Often high analyte concentrations are required in order to have injection of sufficient material for detection. In this regard, a series of devices that are broadly termed 'analyte concentrators' have been developed for analyte preconcentration on-line with the CE capillary. These devices have been used primarily for non-specific analyte preconcentration using packing material of the C18 type. Alternatively, the use of very specific antibody-containing cartridges and enzyme-immobilized microreactors have been demonstrated. In the current report, we review the likely impact of the technology of capillary electrophoresis and the role of the CE analyte concentrator-microreactor on the analysis of biomolecules, present on complex matrices, in a clinical laboratory. Specific examples of the direct analysis of physiologically-derived fluids and microdialysates are presented, and a personal view of the future of CE in the clinical environment is given.

Metalloprotein analysis by capillary isoelectric focusing

Capillary isoelectric focusing (cIEF) was used to analyze three metalloproteins: conalbumin, transferrin and metallothionein (MT). Two different ampholyte mixtures were employed that generated linear pH gradients of 3-10 and 5-8. Several different proteins and one peptide with known isoelectric points (pIs) were used to establish linear relationships between peak migration time and pI. These standards were also used as internal markers to estimate peak pI values of the metalloproteins subjected to cIEF. Conalbumin (iron-free) subjected to cIEF with a pH gradient of 3-10 yielded a single major component (pI 7.17). When the protein was saturated with iron (2 Fe3+/mol protein), a shift to lower pI was observed with a major peak (pI 6.24) and a lesser peak (pI 6.09). Mixing iron-free with iron-saturated conalbumin or adding iron to iron-free conalbumin prior to cIEF produced an additional peak (pI 6.68) that was presumed to be conalbumin containing a single iron atom (monoferric form). Human transferrin subjected to cIEF with a pH range of 3-10 gave a similar separation pattern to conalbumin with four major peaks at pI values of 6.25 (apotransferrin), 5.96 (monoferric form), 5.48 and 5.34 (diferric forms). Additional resolution of the molecular forms of both conalbumin and transferrin was achieved using a narrower pH gradient (5-8). Rabbit liver MT subjected to cIEF with a pH gradient of 3-10 gave a complex separation pattern with two prominent peaks (pI values of 3.73 and 3.56) that were presumed to be the fully metal-saturated MT-1 and MT-2 isoforms. When individual MT isoforms (MT-1 and MT-2) were separately subjected to cIEF with a pH gradient of 3-10, heterogeneous peaks with higher pI values (4.12-4.74) were observed. In contrast, horse kidney MT gave a single predominant peak with a pI of 4.09. MT samples could be separated using a pH gradient of 5-8 despite the fact that their apparent pI values were below the limits of the pH gradient established. In general, the heterogeneity observed for conalbumin, transferrin and MT proteins subjected to cIEF reflects the presence or absence of bound metal. Thus, cIEF represents a potentially useful analytical method which can provide information concerning the metal-binding characteristics of these and perhaps other metalloproteins.

Identification of metallothionein isoforms with capillary zone electrophoresis using a polyacrylamide-coated tube

Metallothionein (MT) isoforms from various liver tissues were separated with capillary zone electrophoresis (CZE) using a polyacrylamide-coated tube at neutral pH. The electrophoresis was performed on MT-1 and MT-2 purified from mouse, rat, rabbit and human livers. The retention times of mouse and rat MT-1 coincided, while the retention times of rabbit and human MT-1 were longer. The retention times of MT-2 purified from the four sources were the same. MT-1 and MT-2 separated more definitely with N-2-hydroxyethylpiperazine-N'-2-ethanesulfonic acid (HEPES)-Tris buffer (25 mM, pH 7.4) than with N-tris(hydroxymethyl)methyl-3-aminopropane sulfonic acid (TAPS)-Tris buffer (25 mM, pH 7.7) or with N-(2-acetamido)iminodiacetic acid (ADA)-Tris buffer (25 mM, pH 7.4). In addition, liver MT isoforms prepared from Zn- or Cd-administered mice could be separated.

Analysis of interaction between cadmium and metallothionein isoforms by capillary zone electrophoresis

The effects of cadmium on the peak area of metallothionein (MT) protein were studied by capillary zone electrophoresis with a polyacrylamide-coated tube at neutral pH. When cadmium was added to a commercial standard MT-1 isoform prepared from rabbit liver, the peak are of the MT-1 isoform decreased in a time- and dose-dependent manner. The MT-2 isoform also decreased with time, but the rate of decrease was lower than that of the MT-1 isoform. When ethylene glyco-bis-(beta-aminoethyl ether)-N,N,N'N'-tetraacetic acid (EGTA) was added to a solution containing cadmium and MT-1, the peak area recovered with increasing concentration of EGTA. Zinc caused a slight decrease in the peak areas of MT-1 and MT-2 compared with cadmium, while addition of sodium did not decrease the areas. Furthermore, the peak areas of MT isoforms of the crude extract prepared from zinc-treated mice also decreased with increasing concentration of cadmium. These results indicate that cadmium may changed the charge of MT, which may account for the observed differences in electrophoretic behavior.