Cementless or hybrid total elbow arthroplasty with titanium-alloy implants. A study of interim clinical results and specific complications

Metallosis Following Titanium Implant Use in the Hand: A Case Report and Review of Current Literature

Adverse reaction to metal debris (ARMD) consists of a spectrum of changes ranging from pure metallosis to aseptic lymphocytic vasculitis-associated lesion and granulomatous inflammation. Currently described ARMD cases are mainly limited to arthroplasty, typically total hip and knee arthroplasties in the lower limb and total wrist arthroplasty in the upper limb. Hypersensitivity to a metallic implant in fracture fixation is rare, and a severe form of metallosis has not been reported so far. In this paper, we present a case of ARMD occurring 10 years after the use of titanium implants for fracture fixation in the hand. Intra-operative findings, histopathological results, and a literature review on ARMD are also described.

Long-term Outcome of Open Synovectomy with Radial Head Resection for Rheumatoid Elbow

BACKGROUND

We reviewed our surgical results of open synovectomy with radial head resection for rheumatoid elbow.

METHODS

We reviewed the 20 patients (22 elbows) underwent open synovectomy for rheumatoid elbows retrospectively. The minimum follow-up period is over 10 years, and the average was 13 years 4 months. Surgical outcomes were evaluated using the VAS pain scale, range of motion, and radiologic outcomes including Larsen's grade and carrying angle.

RESULTS

The mean VAS score was 39 (range, 10-90) at last follow-up. The only one patient underwent revision surgery. The mean flexion-extension range of elbow was -28°-112° and arc of motion was 82° before surgery. The mean flexion-extension range of elbow was -23°-114°, and arc of motion was 90° at last follow-up. Radiologic findings of nine elbows in 21 elbows worsened at last follow-up according to the Larsen-s grade. Carrying angle increased by mean 4.2°, and it increased by 10° or more in four elbows.

CONCLUSIONS

Our results show that open synovectomy with radial head resection resulted in functional motion maintenance and pain control for a long time, but often resulted in an elbow valgus deformity. Our findings suggest open synovectomy can be considered as palliative treatment for painful rheumatoid elbow.

Results of cementless total elbow arthroplasty using the Discovery elbow system at a mean follow-up of 61.8 months

BACKGROUND

The available literature on the use of a cementless total elbow arthroplasty (TEA) design and its results are limited. This clinical study reports the outcome of the cementless Discovery elbow system.

METHODS

Patients were operated on by a single surgeon between 2007 and 2014. Nineteen patients (20 elbows) were available for review, 2 women (1 bilateral TEA) and 17 men. The age of the patients ranged from 27 to 75 years (mean, 48 years). The mean follow-up was 61.8 months (range, 12-156 months). Patients were assessed for range of motion, pain, and satisfaction level. Outcome scores included the Mayo Elbow Performance Score, the Liverpool Elbow Score, and the 12-Item Short Form Health Survey (version 1). Radiographs were reviewed to evaluate for loosening.

RESULTS

The mean Mayo Elbow Performance Score was 77.25, and the mean Liverpool Elbow Score was 6.76. The mean flexion range was 123°, and the mean extension lag was 35°. The mean pronation was 59°, and the mean supination was 58°. On radiologic evaluation, there were no signs of loosening; however, in 2 cases, nonprogressive radiolucent lines were observed. No signs of infection were detected at final follow-up, and no elbows were revised. More than 90% of patients were satisfied with the overall outcome.

CONCLUSION

The cementless TEA seems to be a reliable option for treatment of varying elbow diseases. Long-term results are needed to assess the survivorship of this design.

What design and material factors impact the wear and corrosion performance in total elbow arthroplasties?

The survivorship of total elbow arthroplasties is lower than surgeons and patients would like it to be, especially in patients with posttraumatic arthritis of the elbow. To improve durability, it is important to understand the failure modes of existing implants. Total elbow arthroplasties were designed primarily for low-demand rheumatoid patients. As surgical indications have extended to more active patient populations, the mechanical performance of current designs must meet an increased mechanical burden. Evaluating the degree to which they do this will guide conclusions about which contemporary devices might still meet the need and, as importantly, what design and material changes might be needed to improve performance. WHERE ARE WE NOW?: The reasons for failures of total elbow arthroplasties include infection, loosening, polyethylene wear, locking mechanism failure, periprosthetic fracture, implant fracture, and instability. Implant design factors that have influenced wear include implant constraint, material, coatings, and metal backing. Surgical factors associated with increased wear and subsequent total elbow arthroplasty failure include soft tissue balancing and restoration of alignment and implant positioning. WHERE DO WE NEED TO GO?: A clear need exists for improving the performance of total elbow arthroplasty. Many of the failures that have limited the survivorship of elbow arthroplasties thus far are mechanical in nature with wear-related problems a dominating influence. Much of what we know about the results of total elbow arthroplasty is from small studies frequently involving the designer of the implant. The establishment of total elbow arthroplasty registries coupled with the increasing regulatory burden of postmarket surveillance would lead to a better understanding of the complications and survivorship of elbow arthroplasties. Another primary goal must be to achieve a better understanding of the biomechanics of the normal elbow and how the mechanics are altered after the insertion of elbow arthroplasty components. HOW DO WE GET THERE?: Improving the performance and survivorship of total elbow arthroplasty will require the integration of clinical and implant performance data gained through the establishment of registries with a concerted basic science effort to better understand the functional loads across the joint and to incorporate these loads into experimental and computational models to allow assessment of design and material changes intended to improve durability.

Results of custom-fit, noncemented, semiconstrained total elbow arthroplasty for inflammatory arthritis at an average of eighteen years of follow-up

BACKGROUND

The literature available on the results after noncemented total elbow arthroplasty (TEA) in inflammatory arthritis is limited.

METHODS

Ten patients (7 women, 3 men; 14 elbows total) who underwent custom, noncemented TEA from 1988 to 1995 were retrospectively reviewed. The average age was 28 years (range, 17-45 years). Four patients (4 elbows) had rheumatoid arthritis, and 6 patients (10 elbows) had juvenile rheumatoid arthritis. The mean follow-up was 18 years. All patients underwent a custom, noncemented, semiconstrained TEA with a plasma spray surface designed from preoperative computed tomography scan to achieve metaphyseal fit. The primary outcome was the Mayo Elbow Performance Score, and secondary outcomes were flexion and rotation arc of motion. Intraoperative and postoperative complications and revisions performed were also recorded. Radiographs taken at final follow-up were evaluated for evidence of loosening.

RESULTS

The Mayo Elbow Performance Score improved from a mean of 35 preoperatively to a mean of 91 postoperatively. Flexion arc of motion improved from 50° preoperatively to 111° postoperatively, and rotation arc improved from 75° preoperatively to 145° postoperatively. Four patients underwent bushing revision at 8, 8, 22, and 22 years (29%), respectively, and there was 1 deep infection (7%). One patient had an intraoperative fracture in the humerus that did not require further treatment. On final radiographic follow-up at a mean of 18 years, all the components were fully ingrown, and there was no evidence of loosening or loss of fixation.

CONCLUSION

In the younger population with inflammatory arthritis, noncemented TEA has reliable outcomes clinically and radiographically at long-term follow-up.

Current concepts of elbow-joint disorders and their treatment

BACKGROUND

Recently, many studies have emphasized the importance of the comprehension of detailed functional anatomy and biomechanics of the elbow and its significant contribution in facilitating good functional outcomes of conservative and surgical treatment in the field of elbow disorders.

METHODS

The most common disease of elbow disorders and their treatment was reviewed.

RESULTS

Lateral epicondylitis of the elbow, is defined as a microscopic tear of extensor carpi radialis brevis tendon, and microscopic findings show immature reparative tissue (angiofibroblastic hyperplasia). The patient needs coordinated rehabilitation, range-of motion-exercise, stretching, and bracing in the second phase. Ninety-five percent of patients with lateral epicondylitis heal spontaneously or conservatively. The medial collateral ligament injury of the elbow is most common in the overhead-throwing athlete. Jobe's procedure, the original reconstruction technique, and its modifications in bone-tunnel creation, allow a tendon graft to be wound in a figure-eight configuration through the tunnels. Further modification of Jobe's procedure in bone-tunnel configuration reduced the total number of tunnels and facilitates easier graft tensioning. Outcomes with these reconstruction techniques have proven effective in returning high-level throwing athletes back to their sport. Arthroscopic surgery for the elbow in the throwing athlete has evolved and has proven successful results. Arthroscopic treatment includes debridement of posteromedial synovitis, loose-body removal, and excision of the olecranon spur. Posteromedial elbow impingement is also a source of disability in the overhead-throwing athlete. Twenty-five percent of these patients require a medial collateral ligament reconstruction after removal of a posteromedial bony spur. Linked and unlinked total elbow arthroplasty are successful treatment procedures for patients with rheumatoid arthritis, posttraumatic osteoarthritis, and elderly patients with comminuted distal humeral fractures and the salvage of distal humeral nonunion. Proper selection and implantation of prostheses are also important to achieve good functional outcome and longevity.

CONCLUSION

The success of treatment of elbow disorders depends greatly on surgical design and technique, both of which require comprehensive knowledge of detailed anatomy and biomechanics of the elbow.

Unlinked and convertible total elbow arthroplasty

Total elbow arthroplasty (TEA) is still in its infancy if we compare it with other arthroplasties such as knee or hip. TEA designs have been evolving with experience; however, long-term outcome data remain limited. The designs of total elbow prostheses can be subdivided into 3 general categories: unlinked, linked, and convertible devices. This article focuses on unlinked and convertible prostheses.

The Kudo 5 total elbow replacement in the treatment of the rheumatoid elbow

Between September 1993 and September 1996, we performed 34 Kudo 5 total elbow replacements in 31 rheumatoid patients. All 22 surviving patients were reviewed at a mean of 11.9 years (10 to 14). Their mean age was 56 years (37 to 78) at the time of operation. All had Larsen grade IV or V rheumatoid changes on X-ray. Nine (three bilateral replacements and six unilateral) had died from unrelated causes. One who had died before ten years underwent revision for dislocation.

Of the 22 total elbow replacements reviewed six had required revision, four for aseptic loosening (one humeral and three ulnar) and two for infection. Post-operatively, one patient had neuropraxia of the ulnar nerve and one of the radial nerve. Two patients had valgus tilting of the ulnar component.

With revision as the endpoint, the mean survival time for the prosthesis was 11.3 years (95% confidence interval (10 to 13) and the estimated survival of the prosthesis at 12 years according to Kaplan-Meier survival analysis was 74% (95% confidence interval 0.53 to 0.91).

Of the 16 surviving implants, ten were free from pain, four had mild pain and two moderate. The mean arc of flexion/extension of the elbow was 106° (65° to 130°) with pronation/supination of 90° (30° to 150°) with the joint at 90° of flexion. The mean Mayo elbow performance score was 82 (60 to 100) with five excellent, ten good and one fair result.

Good long-term results can be expected using the Kudo 5 total elbow replacement in patients with rheumatoid disease, with a low incidence of loosening of the components.

Severe metallosis after total elbow arthroplasty-a case report

We present a case of severe metallosis after total elbow arthroplasty in a female patient presenting with manifestations resembling a septic loosening. We discuss the clinical and the operative findings as well as the outcome of this uncommon complication. A review of the literature regarding the pathogenesis, radiographic appearance, and management of metallosis in prosthetic joints is presented.

Corrosion behavior and biocompatibility of nanostructured TiO 2 film on Ti6Al4V

The corrosion behavior and cell adhesion property of nanostructured TiO2 films deposited electrolytically on Ti6Al4V were examined in the present in vitro study. The nanostructured TiO2 film deposition on Ti6Al4V was achieved via peroxoprecursors. SEM micrographs exhibit the formation of amorphous and crystallite TiO2 nanoparticles on Ti6Al4V before and after being annealed at 500 degrees C. Corrosion behavior of TiO2-deposited and uncoated Ti6Al4V was evaluated in freely aerated Hank's solution at 37 degrees C by the measurement and analysis of open-circuit potential variation with time, Tafel plots, and electrochemical impedance spectroscopy. The electrochemical results indicated that nano-TiO2 coated Ti6Al4V showed a better corrosion resistance in simulated biofluid than uncoated Ti6Al4V. Rat bone cells and human aortic smooth muscle cells were grown on these substrates to study the cellular responses in vitro. The SEM images revealed enhanced cell adhesion, cell spreading, and proliferation on nano-TiO2 coated Ti6Al4V compared to those grown on uncoated substrates for both cell lines. These results suggested that nanotopography produced by deposition of nanostructured TiO2 onto Ti alloy surfaces might enhance corrosion resistance, biocompatibility, and cell integration for implants made of Ti alloys.

Failure mechanisms in uncemented Kudo type 5 elbow prosthesis in patients with rheumatoid arthritis: 7 of 49 ulnar components revised because of loosening after 2-10 years

BACKGROUND

Both components of the Kudo type 5 elbow prosthesis can be inserted with or without the use of cement. There have been no reports on the use of this prosthesis with all components uncemented in patients with rheumatoid arthritis.

PATIENTS AND METHODS

We reviewed 49 primary uncemented Kudo type 5 elbow prostheses, inserted in 36 patients with rheumatoid arthritis, after mean 6 (2-10) years. Patients were assessed clinically both pre- and postoperatively (pain, instability, motion, ulnar neuropathy) and radiographically. Furthermore, at the time of follow-up clinical outcome was assessed using the Elbow Function Assessment Scale.

RESULTS

At review, 7 of 49 elbows had undergone revision because of symptomatic loosening of the ulnar component. In 42 unrevised elbows, clinical outcome was excellent in 29, good in 7, fair in 5, and poor in one. 31 of 42 elbows had no pain; 11 were painful at rest (VAS 1-2) and/or as a result of activity (VAS 1-8). With revision as endpoint, survival was 86% at 6 years. Intraoperative malpositioning of the ulnar component with a valgus or varus alignment of < 5 degrees was associated with worse survival.

INTERPRETATION

We found an unexpectedly high rate of loosening of the ulnar component, which was associated with intraoperative malpositioning of the prosthesis. The ulnar component of this prosthesis should not be inserted without cement in patients with rheumatoid arthritis.

Survivorship of the KUDO total elbow prosthesis--comparative study of cemented and uncemented ulnar components: 89 cases followed for an average of 6 years

BACKGROUND

The Kudo total elbow prosthesis (TEP) is a well-established implant with good mid-term results. The ulnar component can be placed with or without cement, and the humeral component is normally placed without cement.

METHODS

89 Kudo type-5 total elbow prostheses were evaluated after a mean follow-up of 6 (1.7-11) years. The indication for joint replacement was rheumatoid arthritis in all cases. 49 prostheses were placed without cement. In 40 cases, the ulnar component was cemented and the humeral component was uncemented.

RESULTS

In the uncemented group, 7 revisions had taken place. 3 of these ulnar components were shortstemmed and 4 were long-stemmed. No revisions had been performed in the hybrid group. In the uncemented group another 7 patients showed progressive radiolucencies, while 3 patients in the hybrid group showed progressive radiolucencies.

INTERPRETATION

In this group of RA patients, the survivorship of the cemented ulnar component was better than that of the uncemented ulnar component.

Comparison of two types of ulnar component in type-5 Kudo total elbow arthroplasty in patients with rheumatoid arthritis

The purpose of this study was to assess the long-term results (more than ten years) of two types of cemented ulnar component with type-5 Kudo total elbow arthroplasty in a consecutive series of 56 patients (60 elbows) with rheumatoid arthritis, and to compare the results in elbows above and below a Larsen grade IV.

There was no radiolucency around the humeral component. Patients in whom a metal-backed ulnar component and a porous-coated stem were used had better clinical results and significantly less progression of radiolucent line formation around the ulnar component. They also had a significantly better long-term survival than patients with an all-polyethylene ulnar component. The clinical results of arthroplasty using all-polyethylene ulnar components were inferior, regardless of the degree of joint destruction.

We conclude that the type-5 Kudo total elbow arthroplasty with cementless fixation of the porous-coated humeral component and cemented fixation of a metal-backed ulnar component is acceptable and well-tolerated by rheumatoid patients.

Requirements for upper extremity motions during activities of daily living

BACKGROUND

Functioning of the upper extremity after implantation of an endoprosthesis remains limited despite the achieved pain relief. Upper extremity kinematics can give insight into function after shoulder arthroplasty. Data on ranges of motion related to the performance of a selection of activities of daily living can aid the clinician in evaluating the outcome of the shoulder and elbow arthroplasties.

METHODS

Cross-sectional descriptive study of range of motion and activities of daily living kinematics, conducted on non-impaired subjects. The shoulder and elbow motions of 24 healthy female subjects are measured with an electromagnetic tracking device while performing 8 range of motion tasks and five activities of daily living. The angles of shoulder and elbow are calculated during these tasks.

RESULTS

A data set with upper extremity joint angles has been obtained. Large glenohumeral rotations are found for the tasks that require high elevation angles. Large axial rotations of the humerus are found for two of the activities of daily living tasks: the perineal care task and the hair-combing task. Large elbow flexions were seen in the following tasks: combing hair, washing the axilla and eating with a spoon.

INTERPRETATION

This study shows a suitable method to describe range of motion and activities of daily living and can serve as a starting point for developing a database on how activities of daily living are performed in a larger population and which joint angles are required to perform these tasks. Results can be used to identify restrictions in upper extremity functioning in patients with shoulder impairments.

The effects of implant composition on extensor tenosynovitis in a canine distal radius fracture model

PURPOSE

Dorsal plating of distal radius fractures with titanium plates has resulted in clinically observed tenosynovitis and tendon rupture. The goal of this study was to investigate whether titanium-based implants result in more extensor tendon inflammation than matched stainless-steel implants in a canine fracture model.

METHODS

An osteotomy was created in the distal radius of 18 beagles and fixed with 2.7-mm 4-hole plates composed of commercially pure titanium, titanium alloy (Ti-Al6-V4), or 316L stainless steel. Animals were killed at an average of 4 months. Tendon gliding was assessed by applying a force at the extensor musculotendinous junction and noting gliding. Histologic grading (mild, moderate, severe) was based on cellular hypertrophy, hyperplasia, and leukocytic infiltration.

RESULTS

Tendons glided freely in 100% stainless-steel specimens, 75% of titanium alloy, and 43% of commercially pure titanium groups. A severe inflammatory reaction was identified in 60% of the titanium alloy (Ti-A16-V4) group, 57% of the pure titanium group, and 0% of the stainless-steel group.

CONCLUSIONS

Dorsal plating of the canine radius with commercially pure titanium or titanium alloy implants produced a greater inflammatory peritendinous response than matched stainless-steel implants.

[Differential arthroplasty and endoprosthesis indications in rheumatoid arthritis of the elbow joint]

Management of patients with rheumatoid arthritis of the elbow has changed significantly over the last several years. From a medical standpoint, the disease-modifying agents have decreased the number of patients requiring a synovectomy. When synovectomy is indicated, arthroscopic synovectomy has lessened the morbidity of this procedure, but the long-term effectiveness as a definitive reconstructive procedure has yet to be determined. Both coupled and uncoupled elbow joint replacements have emerged as reliable interventions for this diagnosis. Mayo's experience with 78 patients with rheumatoid arthritis undergoing total elbow arthroplasty has revealed a satisfactory outcome of approximately 92% at 12 years. The complication rate is approximately 15% consisting primarily of delayed avulsions or deficiency of the triceps tendon (2%), deep infection (2%), and ulnar nerve irritation (3%).

Modeling and finite element analysis of a new revision implant for the elbow

Failed total elbow arthroplasties often are associated with significant bone loss, especially at the level of both humeral condyles. Regular implants might not be ideal for those revision cases and either custom-made implants or complex bone reconstruction procedures with grafts are needed. The goal of the current study was to develop a new revision implant, based on an existing total elbow system (GSB III). The new revision humeral component, with an anterior flange instead of condylar flanges, was designed in a computer-aided design program and virtually implanted in a modeled humerus from a cadaver and subsequently was tested in a finite element model under different loading conditions. The overall distribution of the von Mises stress, as a generalized stress intensity factor, did not differ significantly between the GSB III and the new revision component. There was a tendency that the anterior flange, compared with the condylar flanges, protected the implant-cement-bone interface in the critical region of the distal stem. The finite element analysis suggests that the revision concept for failed total elbow arthroplasties, to rely on existing anterior humerus cortex instead of reconstruction of the condylar bone, seems to have no disadvantage in terms of stress distribution on the implant.

Total elbow arthroplasty with the Kudo prosthesis

Between 1990 and 1997 we undertook 57 Kudo type-4 total elbow replacements in 45 patients with rheumatoid arthritis. A total of 34 patients (44 elbows) were evaluated at an average of 7 (4.4-11.2) years using the Mayo Clinic Performance Index. At review 29 elbows were excellent or good and four were fair or poor. The main complications were intraoperative fractures and ulnar neuropathy. No luxations were seen. Loosening of the ulnar component and breakage of the humeral component were most frequent indications for revision. Preoperative radiographic joint destruction was not correlated with revision rate.

Total wrist arthroplasty in patients with rheumatoid arthritis

PURPOSE

After very good midterm results with an uncemented total wrist arthroplasty we evaluated the long-term outcome in a retrospective study.

METHODS

Forty uncemented anatomic physiologic (APH, Implant-Service Vertreibs-GmbH, Hamburg, Germany) wrist prosthesis implantations performed in 40 patients were reviewed. The mean follow-up period was 52 months (range, 24-73 mo) and the following parameters were examined: radiographs, grip strength, range of motion, and patient's satisfaction.

RESULTS

After a good short-term outcome the results deteriorated with time. The following complications occurred: 2 infections, 3 implant failures, 2 prosthesis migrations, and 33 loosenings/dislocations. All patients (39 of 40) underwent revision surgery, and severe titanium wear in the soft tissues was found intraoperatively in all cases. It became clear that even in a non-weight-bearing joint such as the wrist, titanium alloy may wear and result in tissue metallosis when used as a bearing surface of the implant. As a salvage procedure the prosthesis was removed and an arthrodesis was performed in all patients.

CONCLUSIONS

Because of the deterioration of the results including an unacceptable revision rate we currently do not consider the anatomic physiologic wrist prosthesis to be a suitable implant in patients with rheumatoid arthritis.

Surgical management of the rheumatoid elbow

Many patients with rheumatoid arthritis demonstrate elbow involvement that may limit upper extremity function, usually within 5 years of disease onset. Initial management consists of nonsurgical measures that address synovitis and capsular inflammation in an effort to diminish pain and maintain elbow range of motion. Disease progression may result in articular damage and ligamentous compromise, causing increased symptoms, elbow instability, and functional debilitation. For patients unresponsive to nonsurgical management, open or arthroscopic synovectomy may provide relief of symptoms. For those with more advanced disease, elbow arthroplasty is a reasonable alternative. Advancements in prosthetic technology and surgical techniques allow elbow arthroplasty to be reliably performed in patients with severe rheumatoid arthritis of the elbow.

Importance of a radial head component in Sorbie unlinked total elbow arthroplasty

The effects of a radial head component on total elbow arthroplasty kinematics and stability were evaluated using an anatomic design unlinked total elbow prosthesis. An electromagnetic tracking device recorded motion and varus and valgus displacements under various conditions in 10 cadaveric elbows. The motion patterns of the intact elbows and the Sorbie-Questor total elbow prostheses with a radial head component were similar, as both tended to have a valgus position in extension, varus at midflexion, and more valgus toward full flexion. Under conditions of simulated muscle loading, the maximum valgus and varus laxity of the elbow prosthesis was, on average, 8.6 degrees +/- 4.0 degrees greater than normal. Without the radial head component, however, significant kinematic disturbances and instabilities were seen. The varus and valgus displacements were 13.3 degrees +/- 5.5 degrees greater than the intact elbows. One total elbow arthroplasty without a radial head dislocated during testing. Increasing the muscle loading across the elbow significantly enhanced dynamic stability of the total elbow arthroplasties, especially in the extension half of elbow motion where instability is greatest. However, this dynamic enhancement of stability was seen only in those elbows in which the radial head component had been implanted. The radial head component is an important stabilizer, particularly in extension for this prosthesis, and possibly for other unlinked total elbow prostheses. Although instability of unlinked prostheses depends on the prosthetic design, the use of a radial head replacement may be an important factor in preventing such instability. Perhaps even more importantly, a radial head component balances the load distribution across the articulation, which could decrease stress on the ulnohumeral articulation and therefore possibly reduce polyethylene wear, osteolysis, and loosening.

[Stability of the forearm after resection of the distal ulna and proximal radius in rheumatoid arthritis: report of 11 cases]

Combined resection of radial head and distal ulna could jeopardize the stability and kinematics of the forearm bones. The goals of this retrospective study was to investigate these data after resection of distal ulna and proximal radius in rheumatoid arthritis. Between 1990 and 1998, eleven patients had these bone resections combined with implantation of elbow prostheses (eight Kudo and three GSB III). Wrist surgery consisted in five wrist arthrodeses combined with Darrach procedure, four Sauvé-Kapandji procedures and two isolated Darrach procedures. Mean age at surgery was 58 years and the average follow-up was 40 months. We assessed at follow-up: 1) wrist and elbow pain according to Gschwend; 2) stability of the forearm bones (cubitus valgus angle, impingement of the proximal radial stump with humerus, giving away accident of the ulnar distal stump); 3) wrist and elbow mobility. At follow-up six patients had no pain at the elbow and five had slight occasional pain. At the wrist, five patients had no pain and six slight occasional pain. Elbow motion was increased (from mean 83 degrees [50 degrees-100 degrees] to mean 110 degrees [85 degrees-135 degrees]) excepted in supination which slightly decreased (from mean 3 degrees [40 degrees-90 degrees] to mean 75 degrees [85 degrees-90 degrees]). Mean wrist mobility was impaired because of the five combined radiocarpal arthrodeses. If these five wrist arthrodeses were excluded, the mean ranges of motion were: 10 degrees in flexion, 16 degrees in extension, 2 degrees in radial deviation, 14 degrees in ulnar deviation. At follow-up, no patient had giving away accident of the ulnar distal stump nor impingement between radial stump and humerus in full flexion. Average cubitus valgus was 10 degrees. This study pointed out the predominant effect of the interosseous membrane in stability of the forearm bones.

Kudo total elbow arthroplasty in patients with rheumatoid arthritis: a long-term follow-up study

BACKGROUND

Improvements in the design of total elbow prostheses over the last two decades have led to better and more consistent results. The type-3 Kudo total elbow prosthesis was developed in 1980. The long-term results of use of this implant have not been reported. Because it is an unlinked prosthesis, it is not known whether preservation of the anterior oblique component of the ulnar collateral ligament at the time of implantation is important.

METHODS

A type-3 Kudo total elbow arthroplasty with cement was performed in forty-seven patients (fifty elbows) with rheumatoid arthritis. Revision rates, clinical symptoms, postoperative complications, and radiographic changes were assessed eleven to sixteen years (mean, thirteen years) postoperatively.

RESULTS

The overall survival rate of the prosthesis was 90% at sixteen years. The mean Mayo elbow performance scores were all poor (mean overall score, 43 points) initially. The overall score was substantially improved at both the intermediate follow-up examination (four to six years after the operation) and the late follow-up examination (eleven to sixteen years after the operation), to 81 and 77 points, respectively. The overall rate of radiolucency about the humeral component was 45% at the intermediate follow-up examination and 100% at the long-term follow-up examination. The rate of radiolucency about the ulnar component at the intermediate and late follow-up examinations was 4.3% and 8.9%, respectively. No great differences in results were found with preservation of the anterior oblique component of the ulnar collateral ligament.

CONCLUSIONS

This long-term follow-up study showed acceptable results of the type-3 Kudo total elbow arthroplasty in patients with rheumatoid arthritis. Preservation of the ulnar collateral ligament does not seem to be necessary when performing this procedure.

Surgical treatment of the rheumatoid elbow

In rheumatoid arthritis, the elbow is involved in 20 to 50% of the cases. Surgical treatment for rheumatoid arthritis is proposed to patients in whom an appropriate and adequate attempt at medical management has failed. Improvements in surgical technique and prosthetic design have led to more predictable results in the surgical treatment of the rheumatoid elbow. Surgical treatment of the patient with rheumatoid arthritis continues to evolve. Synovectomy continues to be an effective palliative procedure, preferred in the early stages of disease (I, II, IIIA) with or without radial head resection. Further investigation into the use of arthroscopic techniques may result in decreased morbidity and a quicker recovery. In more advanced stages (IIIA, IIIB, IV), total elbow replacements by experienced surgeons employing contemporary designs, unconstrained or semiconstrained, and surgical techniques are associated with a high degree of success with long-term follow-up, approaching that fortotal hip and knee replacement. Finally, interposition arthroplasty can be proposed for young adults with stage II or IIIA rheumatoid arthritis in whom the elbow is mainly stiff and painful.

Radiography of orthopedic trauma and fracture repair

Fracture of bone and bone healing are similar to healing of soft tissues; however, the crystalline structure of bone tissue and its slow but dynamic recovery give some mystique to the healing process. The problem is further complicated by the common misconception that radiology is the best way to assess the changes occurring in bone. It is becoming more apparent that radiology is best only to describe normal or disrupted anatomical conformation. Other established and emerging modalities are competing with radiology for evaluation of the skeletal tissues. It is most important to remember that a clinical examination with evaluation and assimilation of the clinical signs gives a better indication of the physiological and pathological status of bone healing that any of the sophisticated imaging modalities. Imaging should be reserved as an adjunct to the clinical examination.

Total elbow arthroplasty with use of a nonconstrained humeral component inserted without cement in patients who have rheumatoid arthritis

BACKGROUND

Most total elbow prostheses that are currently in use require cement for fixation of each component. We developed a new (type-5) prosthesis that does not need cement for fixation.

METHODS

The humeral component is made of cobalt-chromium alloy, and its stem is porous-coated with a plasma spray of titanium alloy. There are two options for the ulnar component: an all-polyethylene type and a metal-backed type with a porous-coated stem. Forty-three elbows in thirty-seven patients who had rheumatoid arthritis were treated with total elbow replacement arthroplasty with use of the type-5 prosthesis. The humeral component was implanted without cement in all elbows, whereas the ulnar component was implanted without cement in eleven elbows and was fixed with cement in the remaining thirty-two. The elbows were followed for an average of three years and ten months (range, two years and six months to five years and six months).

RESULTS

The clinical results were assessed according to a modification of the Mayo Clinic Performance Index. At the time of the latest follow-up, the overall result was excellent for six elbows, good for thirty-one, and fair for six. All elbows had been rated as poor before the operation. There was almost complete relief of pain in twenty-nine elbows and mild or occasional pain in the remaining fourteen. Flexion increased markedly, from an average of 104 degrees preoperatively to an average of 133 degrees postoperatively; this difference was highly significant (p < 0.001, Student t test). In contrast, extension (flexion contracture) worsened slightly, from an average of 38 degrees preoperatively to an average of 42 degrees postoperatively; this difference was significant (p < 0.05). There was one postoperative dislocation of the elbow, and ectopic bone formed in another, with recurrence of ankylosis. Both elbows had a reoperation, and a good result eventually was obtained. There were no instances of postoperative infection or neuropathy of the ulnar nerve. Radiographically, there were no radiolucent lines at the bone-metal interface of any of the humeral or ulnar stems that had been implanted without cement, suggesting solid fixation by osseointegration.

CONCLUSIONS

The results of total elbow arthroplasty with use of this prosthesis appear promising. There was a high rate of relief of pain as well as of restoration of adequate function in patients in whom the elbow was severely affected by rheumatoid arthritis.

Total elbow replacement in the treatment of rheumatoid disease

Improvements in total elbow arthroplasty during the last 20 years have resulted in clinical outcomes which now are comparable with the results of hip arthroplasty. The main types of prostheses used are unlinked prostheses or semiconstrained hinged prostheses. The unlinked prostheses require the preservation of bone stock and the ability to reconstruct the collateral ligaments to achieve stability. Semiconstrained, hinged prostheses have inherent stability but humeral loosening was initially a problem. Stress transfer through the humeral stem can be reduced by using a prostheses with anterior flanges (Coonrad-Morrey or GSB3). Survivorship analyses beyond 10 years now are becoming available for these prostheses. There has been no universal agreement as to which outcome measure should be used for total elbow replacements. Future developments will include an evolution of principles as understanding of elbow biomechanics progresses. Operative technique is likely to be modified by the development of alignment aids and jigs.

Results of the Kudo elbow prosthesis in patients with rheumatoid arthritis: a preliminary report

Sixteen elbows in 15 rheumatoid arthritis patients had a total elbow replacement with insertion of a non-constrained surface-replacement prosthesis. One patient died of an unrelated cause, but all the others were available for follow-up (mean follow-up period: 35.4 months). The results were graded according to a modified version of the Morrey elbow score. A good result was seen in 13 elbows and a fair result in two. One infection occurred, which was cured with intravenous antibiotics and maintenance of the prosthesis in place; however, recurrent dislocation persisted. Another patient had postoperative instability with recurrent subluxations. Eleven patients were very satisfied and one was satisfied. The total active range of motion increased significantly from 70.3 degrees (SD 29.6) to 97.0 degrees (SD 15.4), mainly by increased flexion. The modified Morrey score increased significantly from 32.7 (SD 13.1) to 89.3 (SD 10.3). Pain decreased from severe (n = 12) and moderate (n = 3) preoperatively to mild (n = 5) and absent (n = 10) postoperatively.

Surgical treatment of the rheumatoid elbow. An overview

Surgical treatment of the patient with rheumatoid arthritis continues to evolve. Synovectomy continues to be an effective palliative procedure, preferred in the early stages of disease. Further investigation into the use of arthroscopic techniques may result in decreased morbidity and a quicker recovery. Total elbow replacement by experienced surgeons employing contemporary designs and surgical techniques is associated with a high degree of success approaching that for total hip and knee replacement.

Biomechanical and computer analysis of radial head prostheses

Radial head fractures can lead to significant upper extremity disability. A comminuted radial head fracture with a medial collateral ligament tear presents a clinical conundrum. The radiocapitellar (RC) joint should be maintained, yet the head frequently cannot be reduced and stabilized. The silicone rubber implant currently available is not biomechanically or clinically satisfactory, and thus there is a need for a more suitable prosthetic replacement for the radial head. We have attempted to design such a prosthesis and have examined prosthetic design with various materials that would best transmit force of the RC joint. Design configurations based on our cadaveric and radiographic measurements were tested with structural finite element method computer analyses. Materials examined included titanium alloy, cobalt-chrome alloy, alumina ceramic, and ultrahigh molecular weight polyethylene (UHMWPE). Metals and ceramic transmitted force at the distal bone and implant interface and strain shielded the proximal radial cortex while UHMWPE distributed load uniformly through the cortex and along the entire bone and implant interface. In addition, load transmission comparisons were made with the intact radial head, with a silicone prosthesis, and with 6 and 10 mm thick UHMWPE prostheses in cadaveric specimens. UHMWPE prostheses transmit more force to the RC joint than the silicone prosthesis and with leads closer to physiologic levels at all flexion angles. UHMWPE prostheses not only transmit much more force than silicone, but because of substantially less deformation under load, also provide more stability to the joint.

[Complete elbow prosthesis for inflammatory and hemophiliac arthropathy. A retrospective analysis of 22 cases]

We retrospectively analysed 22 total elbow prostheses (8 GSB III, 14 Kudo) implanted because of inflammatory (19 elbows) or haemophilic (3 elbows) diseases, in order to evaluate: 1) functional result and mobility; 2) frequency of loosening. The results were evaluated after an average of 36 months [16-67] by an observer who took part neither in therapeutic decisions, nor in surgery. Twenty elbows were associated with severe pain before surgery, while 16 elbows were painless and 5 had occasional pain at follow-up. The range of flexion was 133 degrees (from 96 degrees to 50 degrees) and the average range of extension was 32 degrees (extension ranged from [-10 to -90 degrees]). Only 2 elbows had a range of pronation-supination less than 100 degrees, the average range of pronation was 75 degrees (from [30 degrees to 90 degrees]) and 75 degrees (from [20 degrees to 90 degrees]) in supination. The functional results were comparable for the two types of prostheses. We observed 2 postoperative dislocations (1 GSB III and 1 Kudo) which were stabilized after surgical revision; and one late dislocation (1 GSB III) related to friction-wear. We identified incomplete ossification between the humerus and ulna in the 8 GSB III and 10 of the 14 Kudo. A reduction of 20 degrees in all mobility sectors was identified with the Kudo when ossifications were observed. Two implants became loose : the two pieces of 1 GSB III and the ulnar piece of 1 Kudo. One humeral piece of Kudo was broken at the junction between the stem and the trochlea. Three other GSB III had severe osteolysis which could compromise fixation or subsequent prosthetic revision. For the inflammatory and haemophilic arthropathies, the elbow prosthesis gave painless and satisfactory mobility for the short and medium term. The loosening of the 22 prostheses and the frequency of osteolysis with the GSB III (3/8) justify a longer follow-up.