Maxillary expansion: clinical implications

Evaluation of the reliability of palatal rugae as a reference area in digital superimposition after slow maxillary expansion treatment

INTRODUCTION

This study aimed to evaluate the stability of palatal rugae patterns after slow maxillary expansion (SME) treatment and the reliability of the rugae region as a reference region in digital superimposition.

METHODS

The SME group comprised 21 subjects with Angle Class I or Class II dental malocclusion with unilateral or bilateral crossbite and constricted maxilla and were selected before the pubertal peak. Intraoral scans were captured via the intraoral scanner iTero Element software (version 1.13; Align Technology, San Jose, Calif) before treatment and after completion of 12 rotations of the screw in the expansion appliance. Patients rotated the screw once a week by the established protocol. The digital data of the impressions were analyzed using GOM Inspect 3D analysis software (version 2018; GOM GmbH, Braunschweig, Germany). Dimensional changes in rugae after SME were measured with MeshLab software (version 2022.02, the Visual Computing Lab of CNR-ISTI, Italy). For the statistical analysis, the Shapiro-Wilk test was used to assess normality, whereas the Kruskal-Wallis and Mann-Whitney U tests were applied for group comparisons.

RESULTS

According to digital superimposition data, the root mean square value of the rugae region in the SME group was found to be 0.195 ± 0.086 mm. The greatest dimensional change was found in the third rugae (1.70 ± 0.42 mm, P <0.001). Post-hoc pairwise comparisons revealed a statistically significant difference between the dimensional changes of the first and third rugae (P <0.05). No statistically significant difference was found as a result of pairwise comparisons of the right and left rugae points (P = 0.083 and P = 0.200, respectively).

CONCLUSIONS

The observed transverse dimensional changes in the rugae, particularly in the third rugae, indicate that caution should be exercised in using the rugae region as a reference in superpositions after SME treatment.

Evaluation of nutrition changes during rapid maxillary expansion in adolescents

INTRODUCTION

This study aimed to evaluate the nutritional changes in adolescents undergoing bonded rapid maxillary expansion (RME).

METHODS

The study included 30 patients with maxillary posterior crossbite aged 12-16 years (21 girls and 9 boys) who were treated at the Department of Orthodontics, Faculty of Dentistry, Adıyaman University. Body weight (BW), body mass index (BMI), and 24-hour retrospective food consumption were recorded at 4 different time points (immediately before installation of the RME appliance [T1] and at the first [T2], fourth [T3], and 12th week of treatment [T4]).

RESULTS

The energy, protein, fat, fiber, vitamin A, thiamine, riboflavin, vitamin B6, folate, vitamin E, and vitamin C levels at T1 were significantly higher than those at T2, T3, and T4, whereas the protein, carbohydrate, fiber, vitamin A, thiamine, riboflavin, vitamin B6, folate, vitamin E, and vitamin C levels at T2 were significantly lower than those at T1, T3, and T4 (P <0.05). BW and BMI at T1 were significantly higher than at T2 (mean decrease: BW, -1.71 ± 0.87; BMI, -0.70 ± 0.33) and T3 (mean decrease: BW, -1.09 ± 0.59; BMI, -0.55 ± 0.26; P <0.05).

CONCLUSIONS

Eating habits may change during RME.

Stress and Displacement Dynamics in Surgically Assisted Rapid Maxillary Expansion: A Comprehensive Finite Element Analysis of Various Osteotomy Techniques

Objectives: This study aimed to compare the effects of surgically assisted rapid palatal expansion (SARPE) techniques and their combinations on the stresses (von Mises, maximum principal, and minimum principal) and displacements that occur in the maxilla, facial bones, and maxillary teeth using three-dimensional finite element analysis (FEA). Methods: SARPE was simulated using seven different osteotomy techniques. The FEA models were simulated with a combination of various osteotomies, including midpalatal and lateral osteotomies, lateral osteotomy with a step, and separation of the pterygomaxillary junction. For each osteotomy variant, the instantaneous displacements and stresses resulting from forces applied by a 1 mm expansion of a tooth-borne appliance were evaluated. Results: Midpalatal osteotomy increased lateral displacement in the alveolar bone margins and intermaxillary suture while significantly reducing stresses around the intermaxillary suture. The addition of a pterygomaxillary osteotomy to the midpalatal and lateral osteotomies effectively reduced stresses in the posterior maxilla and cranial structures while enhancing lateral displacement. Although lateral osteotomy significantly reduced stresses in the midface, its effect on maxillary expansion was limited. Stepped lateral osteotomy had minimal effects on transverse displacement and stress reduction. Conclusions: Increasing the number of osteotomies reduced stress levels in the maxilla while enhancing lateral displacement. These results highlight the importance of selecting the most appropriate osteotomy technique to achieve optimal outcomes.

Comparison of Ultrasonography and Cone-beam Computed Tomography for Quantitative Assessment of Midpalatal Suture Opening after Rapid Palatal Expansion: A Pilot Study

Background

The study was to compare the ultrasonographic (USG) and cone-beam computed tomographic (CBCT) measurements of the width of anterior midpalatal suture (MPS) opening following rapid palatal expansion (RPE).

Methods

The study included 13 patients (boys: 6; girls: 7) with a mean age of 11.85 ± 1.82 years who underwent RPE therapy for maxillary transverse deficiency. The width of the anterior MPS opening was measured in real-time USG, postscan USG image, and CBCT that were obtained immediately after maxillary expansion. The postscan USG and CBCT measurements were performed twice by two examiners at different times. The intraclass correlation coefficient (ICC), Bland-Altman plot, and paired t-test were performed to evaluate intra- and inter-examiner reliability, level of agreement, and systematic error between different measurements.

Results

On serial USG evaluation, the MPS opening was seen as the discontinuity in the margins of the maxillary cortical bone, which was not evident before expansion or after the retention period. The intra- and inter-examiner reliability was high (ICC >0.9) for all the measurements. The Bland-Altman plot showed considerable agreement between the different methods, with maximum observations having a mean difference which was within the 95% limits of agreement (real-time vs. postscan USG: ±0.75 mm; CBCT vs. real-time USG: ±0.93 mm; and CBCT vs. postscan USG image: ±1.09 mm). The systematic differences were not statistically significant (P < 0.05) for all the computed measurements.

Conclusion

USG can be used as a reliable nonionizing imaging modality to assess the anterior MPS opening following RPE.

Evaluation of the accuracy of a simplified hybrid method versus the traditional digital method for measuring palatal volume

Objective

This study aimed to compare a direct conventional 3D digital technique vis a vis a hybrid method in measuring palatal volume.

Materials and methods

Thirty maxillary casts were obtained from the records of patients undergoing orthodontic treatment and pre-conceived boundaries of the palatal vault were marked. Sample was categorised into Group I (Volume estimation using CBCT scan) and Group II (Volume estimation using hybrid method). Estimation of the palatal volume in this study involved filling the volume of interest in the palate with gypsum (Type IV) stone material and carefully carving according to the boundaries and anatomy. This positive reproduction of the palatal space was safely retrieved and then scanned in the NewTom GiANO HR Cone Beam Imaging setup. The obtained scan was analysed in NNT Software Version 3.10 and the volume of the palate was calculated. Two experienced orthodontists carried out the measurements to evaluate the inter and intra-observer reliability. This was compared with the palatal volume calculated by the conventional digital method using CBCT in the NNT Software.

Result

This study showed a consistent and narrow range of the confidence interval for palatal volume. Hence, the sample size was sufficient and had good precision. Considering a 95 % confidence interval, the intra-class correlation coefficient was robust (>0.9) for all measurements calculated by the hybrid method suggesting a high reliability. The mean difference in measurement of palatal volume (Group I vs, Group II) was 1.37 + 0.64 mm3 and the difference was statistically insignificant. Statistical t-test conducted between the two methods showed a p-value of 0.34, implying no statistically significant difference between the two methods.

Conclusion

The hybrid method for evaluating the palatal volume is simple, accurate and comparable to the conventional digital method. A major advantage of this simplified method is that the patient is not exposed to any radiation of CBCT. Also, need for a specific skillset for digitally measuring the palatal volume is not a must.

Investigation of changes caused by Rapid Maxillary Expansion in mandibular bone and temporomandibular joint trabecular structure using fractal analysis

BACKGROUND

The aim of this study is to evaluate the changes in the trabecular structure of the mandibular bone and temporomandibular joint following Rapid Maxillary Expansion.

METHODS

Thirty-nine patients who received Rapid Maxillary Expansion treatment in the Department of Orthodontics of the Faculty of Dentistry were selected from the archieve for the study. Trabecular structure changes of the angulus mandible, corpus mandible, and condyle regions were examined using fractal analysis on the dental panoramic radiographs. Radiographs taken before the treatment (T0) and at the end of the 3-month retention period (T1) of the patients.

RESULTS

There was no statistically significant difference between T0 and T1 in the condyle, ramus mandible, and corpus mandible regions depending on time and sex. (p < 0.05) CONCLUSION: The results of this study showed that Rapid Maxillary Expansion treatment does not have a significant impact on the trabecular structure of the mandible and temporomandibular joint depending on time and gender.

Effect of treatment of transverse maxillary deficiency using rapid palatal expansion on oral health-related quality of life in children: complementary results for a controlled clinical trial

OBJECTIVE

To evaluate the effect of rapid palatal expansion (RPE) using Haas-type expanders on children's oral health-related quality of life (OHRQOL) and compare said effect with that previously reported for the use of Hyrax-type expanders.

MATERIALS AND METHODS

Forty participants aged 8-10 years with transverse maxillary deficiency were treated using Haas appliances. OHRQOL was measured using the CPQ8 - 10 before RPE, during RPE (T1), at the end of RPE (T2), and 1 month after appliance removal (T3). Generalized mixed models were fitted to assess the effect of the Haas-type expander compared to previously collected data (a nontreated and a Hyrax-type expander-treated group).

RESULTS

RPE with Haas-type appliances had a negative impact on overall OHRQOL at T1 and T2 (P = 0.001), and a positive impact at T3 (P = 0.001). The Haas-type expander had a significantly greater negative impact on OHRQOL than the Hyrax-type appliance during RPE. At T1, overall scores using the Haas-type expander were 1.08 times the scores using the Hyrax-type expander (i.e., 8% increase; 95% CI, 1.01-1.17; P = 0.033). Patients using the Haas appliance had 1.24 times the scores of those using Hyrax-type devices for the oral symptoms domain at T1 (i.e., 24% increase; 95% CI, 1.06-1.46; P = 0.009).

CONCLUSIONS

Correction of the transverse maxillary deficiency by RPE using the Haas appliance in children 8-10 years improves OHRQOL. The Haas- and Hyrax-type devices temporarily worsen OHRQOL during treatment, however, the negative impact is less with the Hyrax-type expander than with the Haas-type expander, because it causes fewer negative oral symptoms.

CLINICAL RELEVANCE

From a patient-centered perspective, the use of the Hyrax over the Haas appliance may be suggested as it causes less negative oral symptoms during use.

Three-dimensional assessment of the maxilla after modified surgically assisted rapid expansion: a retrospective study

OBJECTIVE

This retrospective study aims to assess the three-dimensional dentoskeletal effects and median palatal suture opening pattern in patients undergoing modified surgically assisted maxillary rapid expansion (SARME) without pterygoid plate detachment.

METHODS

Twenty-eight patients submitted to modified SARME between 2009 and 2016 were retrospectively evaluated through cone-beam computed tomography (CBCT). Dental and skeletal measurements were taken at three different operative periods (before the expansion - T0; at the end of the activation of the Hyrax device - T1; and six months after the immobilization of the device - T2). Statistical analyses, including ANOVA and Pearson's correlation coefficient, were performed using SPSS software.

RESULTS

SARME demonstrated significant transverse maxillary expansion (with an average of 6.05 mm) with a greater impact in the anterior region. Dental measurements, including canine and molar distances, exhibited significant changes over the operative periods. Bone measurements (ANS and PNS) presented small but significant alterations, including a slight inferior displacement of ANS during device activation. The nasal floor width increased, followed by a width reduction after immobilization. The median palatal suture predominantly exhibited a Type II (V-shaped) opening.

CONCLUSION

The modified SARME presented a transversal direction increase and a super-lower skeletal displacement, with the anterior region being more affected than the posterior region. There was no change in the anteroposterior direction of the maxilla. Additionally, there was an increase in the linear dental measurements and a decrease in the angular measurement, with a positive correlation between the amount of posterior bone expansion and molar expansion as a result of the treatment in the analyzed period.

Current Trends in Pediatric Orthodontics: A Comprehensive Review

Pediatric orthodontics is a critical field focusing on the diagnosis, prevention, and treatment of dental and facial irregularities in children. This comprehensive review explores current trends and methodologies in pediatric orthodontics and discusses the multifactorial etiology of malocclusions, including genetic, environmental, and disease-related factors. The importance of proper diagnosis is highlighted, and the extraoral, intraoral, and functional evaluations essential for effective treatment planning are detailed. Various orthodontic conditions such as Class III and Class II malocclusions, abnormal oral habits, arch length discrepancies, anterior and posterior crossbites, open bites, and deep bites are examined in depth. The review also addresses the role of temporomandibular joint disorders (TMDs) and obstructive sleep apnea (OSA) in pediatric patients, emphasizing the need for early and accurate diagnosis to facilitate appropriate intervention. The use of clear aligners in early orthodontic intervention is evaluated given their efficacy and improved patient satisfaction compared to traditional appliances. Additionally, the article discusses the non-advisability of early interception for certain self-correcting malocclusions and the limitations of pediatric orthodontic treatment, including compliance-related issues and the unique anatomical considerations of deciduous dentition. This review aims to provide a detailed understanding of contemporary practices and challenges in pediatric orthodontics, offering insights for clinicians to enhance treatment outcomes and patient care.

Ultrasonic mapping of midpalatal suture - An ex-vivo study

OBJECTIVE

Rapid maxillary expansion is a common orthodontic procedure to correct maxillary constriction. Assessing the midpalatal suture (MPS) expansion plays a crucial role in treatment planning to determine its effectiveness. The objectives of this preliminary investigation are to demonstrate a proof of concept that the palatal bone underlying the rugae can be clearly imaged by ultrasound (US) and the reconstructed axial view of the US image accurately maps the MPS patency.

METHODS

An ex-vivo US scanning was conducted on the upper jawbones of two piglet's carcasses before and after the creation of bone defects, which simulated the suture opening. The planar images were processed to enhance bone intensity distribution before being orderly stacked to fuse into a volume. Graph-cut segmentation was applied to delineate the palatal bone to generate a bone volume. The accuracy of the reconstructed bone volume and the suture opening was validated by the micro-computed tomography (µCT) data used as the ground truth and compared with cone beam computed tomography (CBCT) data as the clinical standard. Also included in the comparison is the rugae thickness. Correlation and Bland-Altman plots were used to test the agreement between the two methods: US versus µCT/CBCT.

RESULTS

The reconstruction of the US palatal bone volumes was accurate based on surface topography comparison with a mean error of 0.19 mm for pre-defect and 0.15 mm and 0.09 mm for post-defect models of the two samples, respectively when compared with µCT volumes. A strong correlation (R2 ≥ 0.99) in measuring MPS expansion was found between US and µCT/CBCT with MADs of less than 0.05 mm, 0.11 mm and 0.23 mm for US, µCT and CBCT, respectively.

CONCLUSIONS

It was possible to axially image the MPS opening and rugae thickness accurately using high-frequency ultrasound.

CLINICAL SIGNIFICANCE

This study introduces an ionizing radiation-free, low-cost, and portable technique to accurately image a difficult part of oral cavity anatomy. The advantages of conceivable visualization could promise a successful clinical examination of MPS to support the predictable treatment outcome of maxillary transverse deficiency.

Evaluation of Bone Thickness and Density Values in Resistance Regions in Rapid Maxillary Expansion Using Computed Tomography

OBJECTIVES

This study used computed tomography (CT) to compare the bone thickness and density values around the zygomaticomaxillary, zygomaticotemporal, and pterygomaxillary sutures that are resistant to rapid maxillary expansion (RME) treatment according to age, sex, and cervical vertebrae maturation (CVM) stage.

METHODS

The study included 200 paranasal sinus records obtained for medical diagnosis and examination in a radiology clinic. The records provided data on 110 males and 90 females aged between 4 and 28 years. Bone thickness and density values around the zygomaticomaxillary, zygomaticotemporal, and pterygomaxillary sutures were measured using CT imaging. The correlations of bone thickness and density values with the variables of age, sex, and CVM stage were evaluated.

RESULTS

No statistically significant difference was revealed between the bone thickness values around the zygomaticomaxillary and zygomaticotemporal sutures and age, sex, CVM stage, and the right and left regions of the same individual ( P >0.05). A strong correlation was identified between Hounsfield units (Hu) values on bone density in all 3 regions and age and sex ( P <0.001). No correlation was found between the CVM stage and density values around the zygomaticomaxillary, zygomaticotemporal, and pterygomaxillary sutures ( P >0.05).

CONCLUSIONS

The Hu values of the records from females were higher than those of males in all age groups. It was observed that with increasing age, bone density values increased in all 3 regions, and thus circummaxillary region's Hu value increased.

Midpalatal suture maturation in 15- to 35-year-olds: morphological assessment in the coronal plane using CBCT-an exploratory study

Rapid maxillary expansion (RME) is used in patients presenting transverse maxillary deficiency. However, RME may be unpredictable after late adolescence if the midpalatal sutural maturation stage (MPMS) is in late stage. Since MPMS evaluation is influenced by the expertise of the operator and image quality, this classification method could be complemented. Therefore, this study aimed to analyze the morphology of the midpalatal suture (MPS) and its surrounding bone in the coronal plane using cone beam computed tomography (CBCT) images of adolescents and young adults and to correlate the findings with their respective MPMS status. CBCT scans of 200 patients aged 15-35 years of both sexes were evaluated. MPS and surrounding bone tissue characteristics in the coronal and axial sections were analyzed, and MPMS was evaluated (A to E). Six categories were identified for the coronal evaluation, analyzing it in 2 standardized locations. Sutural morphology: I, hypodense sutural line limited by 2 hyper-dense para-sutural lines; II, hypodense sutural line; and III, suture not visible. The presence of para-sutural cancellous bone: CB0, compact bone; CB1, dense cancellous tissue; CB2, spaced cancellous bone. Midpalatal bone thickness (MBTh) was also measured. ANOVA-Bonferroni, chi-square, logistic regression and t-tests were used. MPMS increased with age. Sutural morphology I and CB0 bone were the most prevalent. Here we show that sutural morphology, para-sutural bone characteristics, and MPSM were significantly associated. The coronal evaluation of the MPS can complement the information from the MPSM assessment, allowing the identification of patent MPS even in the presence of late MPSM.

Clinical Insights Into Addressing Constricted Maxillary Arch in Angle's Class II Malocclusion: A Case Report

The transverse dimension, often overlooked in orthodontics, plays a crucial role in malocclusions, affecting not only occlusion in that dimension but also sagittal and vertical dimensions. Posterior crossbites, indicative of transverse maxillary issues, are commonly addressed through palatal expansion. This case report explores the clinical insights into addressing a constricted maxillary arch in Angle's Class II malocclusion using a nickel-titanium (NiTi) expander. The NiTi expander provides constant and optimal expansion forces by incorporating a temperature-activated NiTi alloy. A 16-year-old male with irregularly placed teeth, high palatal vault, and posterior crossbite underwent treatment involving NiTi expander usage for maxillary expansion. The case presentation details the patient's journey, starting with upper arch bonding and expansion, then lower arch bonding, and concluding with complete leveling and alignment without extractions. The presented case demonstrates successful correction of a constricted maxillary arch, specifically in the canine and molar regions, utilizing the NiTi expander. The observed increase in intermolar width aligns with previous studies, showcasing the effectiveness of slow maxillary expansion. This article contributes valuable clinical insights into addressing transverse maxillary issues, emphasizing the importance of careful consideration in choosing the appropriate expansion method for optimal results.

Long-term stability of posterior crossbite correction, treated in the mixed or permanent dentition of growing children: A systematic review and meta-analysis

When treating posterior crossbite, the primary goal is to achieve long-term crossbite correction. The majority of studies however focus on relapse of the increase in the transverse dimension, but not relapse of the crossbite itself, which is an essential outcome. The aim of the present study was to determine long-term stability (2 years minimum post-treatment) of posterior crossbite correction, treated in mixed or early permanent dentitions of growing children. Following registration in PROSPERO (CRD42022348858), an electronic literature search including PubMed, Embase, Web of Science, the Cochrane Library, and a manual search were conducted up to January 2023, to identify longitudinal studies looking into the long-term stability of crossbite correction in growing children. Data extraction and risk of bias assessment were carried out, and subsequently, a random-effects meta-analyses models were used to calculate estimates for relapse of the crossbite and relapse at the transverse level. Twenty-two studies were included, of varying designs and quality, representing 1076 treated patients, with different expansion appliances and protocols. Meta-analysis results showed that 19.5% (95% CI: 15%; 25%) of patients present with relapse of posterior crossbite at long-term follow-up. At the transverse level, 19.3% of the total expansion (including overexpansion) relapsed (95% CI: 13%; 27%) regardless of whether there a was relapse of the crossbite itself. Data from existing studies, with a moderate level of evidence, indicate that the long-term stability of posterior crossbite correction in growing children is unfavourable in roughly 1 in 5 growing children, with crossbite relapse long-term. On average, 19% of the maxillary expansion performed (including overexpansion) relapses long-term, which may occur in cases with or without relapse of the crossbite.

A Retrospective Histological Study on Palatal and Gingival Mucosa Changes during a Rapid Palatal Expansion Procedure

The most common inflammatory reactions in the oral mucosa are found at the gingival level. The treatment of these inflammations requires, first of all, the removal of the causative factor; often, this maneuver is sufficient. The aim of this retrospective study was to evaluate clinical and histopathological changes that occur in terms of gingival and palatal mucosa enlargement during palatal expansion treatment and their evolution during treatment. Twenty-five (n = 25) research participants, aged between thirteen and twenty-six years old, were examined in this retrospective study. At the end of the treatment, fragments of tissue from the affected level were obtained via incisional biopsy and sent to the histopathology laboratory for a specialized examination. The changes identified were specific to mechanical traumatic injuries, thus excluding hyperplasia from other etiologies (infectious, tumoral, or non-mechanical traumatic). The examined fragments showed hyperplasia. The histopathological examination revealed the mechanical character of the lesion, strengthening the causal relationship between the insertion of the expander and the occurrence of hyperplasia of the palatal mucosa. The type of palatal expander influenced the degree of inflammation, with the severity of hyperplasia being more pronounced in the case of mini-implant-anchored rapid palatal expander (MARPE) usage than in the case of tooth-borne rapid palatal expander (RPE) usage. The analysis of the distance between the expander and the palatal mucosa did not provide conclusive results; the incidence and severity of the reaction were variable in patients with the same distance between the expander and the palatal or gingival mucosa.

Evaluation of expansion forces of five pure bone-borne maxillary expander designs anchored with orthodontic mini-implants: An in vitro study

AIM

This in vitro study investigates the limit of expansion forces and torque wrench forces developed by five skeletal bone expander designs (MICRO 2/4 expanders™) for clinical application.

MATERIAL AND METHODS

A total of 30 skeletal expanders were placed in artificial bone blocks and mechanically tested, simulating maxillary expansion. Differences in jackscrew (Dentaurum™ [D], Superscrew™ [S] and Powerscrew™ [P]), number of orthodontic mini-implants (OMIs; two or four) and their placement inclinations (parallel 0° or 10° inclination) form five designs (D4/10°, S4/0°, S4/10°, P4/10° and P2/10°). Expansion forces and torque wrench values were registered, and radiographs were made initially and after 4 mm of expansion. Stress-strain curves were obtained after successive activations and the statistical analysis was performed as appropriate.

RESULTS

Plastic deformations in the OMIs and jackscrew occurred around the activation numbers 11-13, with torque wrench values in the range of 500-700 cN. The maximum expansion forces in expanders with four OMIs varied from 93.0 (D4/10°) to 166.6 N (P4/10°) whereas two OMI expanders (P2/10°) registered forces of 79.4 N. Radiographs revealed during loads bending forces (S4/00°, S4/10°) with jackscrew and OMIs deformation in a convex shape, and shear forces (P4/10°, P2/10°) demonstrated only OMIs deformation in a concave shape, providing 15% more expansive force. The jackscrew D4/10° did not have any deformation, but its wire key did not allow reliable activations from activation number 10 and compared to S4/10° and P4/10°, these expanders provided greater expansion forces (P = 0.000 and P = 0.032, respectively).

CONCLUSION

The different results obtained in stability and expansion forces indicate that if the activations are carried out under extreme conditions, they may have clinical importance with deformations and non-working expansion mechanics. Jackscrew designs play an important role in expansive forces and expander stability. Torque wrench values can be used clinically as a tool to asses the expansion forces and to avoid deformations.

Three-dimensional morphometric analysis of cranial sutures - A novel approach to quantitative analysis

Objective

Differences in complexity of cranial suture forms on the endocranial (i.e., deep) and ectocranial (i.e., superficial) skull surfaces have been noted in the literature, indicating through thickness three-dimensional (3D) suture variability depending on the chosen section and necessity for considering the complete 3D structure in many cases. This study aims to evaluate the variability of suture morphology through the skull thickness using a rat model, and to provide more robust metrics and methodologies to analyze suture morphology.

Design

X-ray micro-computed tomographic (μCT) imaging methods were utilized in order to provide internal structure information. Methods were developed to isolate and analyze sutures widths and linear interdigitation index (LII) values on each adjacent offset transverse plane of the μCT datasets. LII was defined as the curved path length of the suture divided by the linear length between the ends of the region of interest. Scans were obtained on 15 female rats at ages of 16, 20, and 24 weeks (n = 5/age). Samples were imaged at 18 μm resolutions with 90 kV source voltage, 278 μA source amperage, and 0.7° increments. Suture widths and LII values were compared using a Kruskal-Wallis test.

Results

3D variability in local suture widths within individuals, as well as through thickness variabilities in planar widths and LII was observed. Kruskal-Wallis tests for bulk through thickness averaged suture widths and LII were found to be statistically insignificant, despite clear geometric differences through suture thicknesses.

Conclusion

Although the bulk morphometric variability between age groups was found to be statistically insignificant, the 3D variability within individuals point to the importance of analyzing suture form using 3D metrics when studying suture development, response to functional activity, or morphometry in general.

Immediate dentoskeletal and periodontal effects of miniscrew-assisted rapid palatal expansion: Comparison between young vs middle-aged adults

INTRODUCTION

This study aimed to compare the dentoskeletal and periodontal changes after miniscrew-assisted rapid palatal expansion (MARPE) in patients aged 18-29 and 30-45 years.

METHODS

The sample comprised 28 subjects with transverse maxillary discrepancy successfully treated with MARPE. The young adult (YA) group comprised 14 subjects (mean age, 22.8 years; 3 male, 11 female). The middle adult (MA) group comprised 14 subjects (mean age, 36.8 years; 6 male, 8 female). All patients were treated with a 4-miniscrew MARPE expander. The activation protocol was one quarter turn twice a day until the midline diastema opening, followed by one quarter turn a day until overcorrection. Cone-beam computed tomography (CBCT) scans taken before and immediately after the expansion was analyzed using OnDemand3D Dental software. Using CBCT coronal images, transversal dentoskeletal and periodontal variables were measured in the preexpansion and postexpansion. Intergroup comparisons of expansion changes were performed using t and Mann-Whitney tests (P <0.05).

RESULTS

Groups were compatible at preexpansion for most CBCT measurements. A success rate of midpalatal suture opening of 100% and 81% was observed for YA and MA groups, respectively. No intergroup differences were found for the maxillary and dental arch widths increases. The buccal tip of anchorage teeth was observed similarly in both groups. The buccal bone thickness of posterior teeth decreased, and the palatal bone thickness increased after expansion with no difference between groups.

CONCLUSIONS

After MARPE, the MA group showed similar dentoskeletal and periodontal changes compared to the YA group.

Applicability of Fractal Analysis for Quantitative Evaluation of Midpalatal Suture Maturation

BACKGROUND

The treatment of transversal maxillary deficiency usually aims at skeletal expansion. The treatment option highly depends on the maturation stage of the midpalatal suture (MPS), which may vary between individuals at the same chronological age. Therefore, the individual determination of the MPS maturation is crucial.

AIMS

Our aim was to investigate the applicability of fractal analysis for the quantitative evaluation of MPS maturation.

METHODS

Nine experienced orthodontists were asked to evaluate the MPS maturation on 51 cone beam computed tomography (CBCT) scans according to the Angelieri classification method. Intra- and inter-examiner reliability was measured using Cohen's Kappa coefficient. The stages were agreed upon according to the results of the examiners with the highest strength of agreement. Fractal analysis was then performed on the CBCTs and the correlation between the fractal dimension values and maturation stages was then evaluated. Optimal fractal dimension cut-off values were determined using a receiver operating characteristic curve.

RESULTS

The cut-off point was found at 1.073, at which the use of fractal dimension for predicting MPS maturation showed 100% sensitivity, 93.7% specificity, 9.5% false positive, 0% false negative rate.

CONCLUSION

Our results provided further evidence that fractal analysis is a reliable tool to determine MPS maturation stage.

Age-dependent effects on palate volume and morphology during orthodontic RME treatment

OBJECTIVES

Rapid maxillary expansion (RME) shows different age-dependent effects. It has been shown that RME leads to a parallel expansion prior to the age of 10, while later and especially from the age of 12, a V-shaped expansion happens (transverse, anterior > posterior; horizontal, inferior > superior). However, it is not clear to what extent these effects influence palatal volume and morphology and eventually maxillary functional space. The aim of the present study was to examine possible age-related effects of treatment with a dental anchored RME appliance upon volume and width/height ratio of the anterior and posterior palate.

MATERIALS AND METHODS

Sixty children and adolescents with documented treatment histories after RME were divided into three equal groups according to age at treatment begin (PG 1, < 10 years, n=20; PG 2, 10 ≤ 12 years, n=20; PG 3, > 12 years, n=20). Maxillary dental casts before and after therapy were digitised. Changes in palatal volume were determined using 3D analyses.

RESULTS

In all patients, the palatal volume increases significantly after RME. Older patients experienced smaller increases in total and posterior volume in absolute and percentage terms. The anterior palate volume increases are almost equal in all patients. Since palatal width increases more markedly than palatal height, the width/height ratio always increases. Except for the posterior region in PG 3, its increase is significant in all groups, both anteriorly and posteriorly. After successful RME, the palatal morphology appears normal anteriorly in PG 1, PG 2 and PG 3 and rather steep posteriorly in PG 3.

CONCLUSIONS

RME treatment with identical force application causes different, age-dependent effects upon palate volume and morphology. Width changes have a greater influence on palate volume than height changes.

CLINICAL RELEVANCE

It is preferable to use an RME prior to the age of 10 if homogeneous changes of the anterior and posterior palate regarding maxillary symmetry and functional space are desired.

Self-perceived pain in Hyrax versus other maxillary expansion orthodontic appliances: a systematic review of clinical studies

PURPOSE

To evaluate self-perceived pain levels in the Hyrax compared to other types of maxillary expansion (ME) appliances in growing patients.

METHODS

An unrestricted search of indexed databases and manual searching were performed up to October 2022. Randomized controlled trials (RCTs) comparing the Hyrax appliance with other ME appliances were included. Data screening, extraction, and Risk of Bias (RoB) assessment with the Cochrane tool were performed by two authors.

RESULTS

Six RCTs were included. The number of participants in the included RCTs ranged between 34 to 114 and included both male and female growing patients. Various tools were used to measure self-perceived pain including the Graphic Rating Scale for Pain, the Wong-Baker Faces Pain Scale, the Numerical Rating Scale, the visual analogue scale, and a questionnaire. One RCT reported that pain intensity in patients treated with the Hyrax was higher than in the Haas appliance, with a statistically significant difference limited to the first day. Two RCTs reported that pain intensity in patients treated with the Leaf expander was lower than in the Hyrax during the first 7 days of treatment. Two RCTs reported no significant differences in pain intensity between the Hyrax and other ME appliances. One RCT reported that pain intensity in patients using the computer-guided skeletal ME appliance was higher than in the Hyrax appliance at the first day after expansion. Four RCTs had a high RoB, and two RCTs had a moderate RoB.

CONCLUSIONS

Within the limitations of the present systematic review and based on the currently available evidence, it is challenging and inconclusive to identify the best maxillary expansion appliances, regarding pain levels for growing patients.

Midpalatal Suture Maturation Stage in 10- to 25-Year-Olds Using Cone-Beam Computed Tomography-A Cross-Sectional Study

In this study, we aimed to evaluate the frequency of midpalatal maturational stages in a Chilean urban sample of adolescents, post-adolescents and young adults, associated with chronological age and sex, by assessing CBCT scan images. Tomographic images in axial sections of the midpalatal sutures from 116 adolescents and young adults (61 females and 55 males, 10-25 years old) were classified according to their morphologic characteristics in five maturational stages (A, B, C, D and E), as proposed by Angelieri et al. The sample was divided into three groups: adolescents, post-adolescents and young adults. Three previously calibrated examiners (radiologist, orthodontist and general dentist) analyzed and classified the images. Stages A, B and C were considered to be an open midpalatal suture, and D and E were considered to be a partially or totally closed midpalatal suture. The most frequent stage of maturation was D (37.9%), followed by C (24%) and E (19.6%). The possibility of finding closed midpalatal sutures in individuals of 10 to 15 years was 58.4%, and in subjects aged 16 to 20 and 21 to 25 years, it was 51.7% and 61.7%, respectively. In males, Stages D and E were present in 45.4%; for females, this prevalence was 68.8%. Individual assessment of the midpalatal suture in each patient is of crucial importance before making the clinical decision of which is the best maxillary expansion method. Due to the extensive calibration and training required, it is advisable to always request a report from a radiologist. Individual evaluation with 3D imaging is recommended because of the great variability observed in the ossification of midpalatal sutures in adolescents, post-adolescents and young adults.

Immediate skeletal effects of rapid maxillary expansion at midpalatal suture opening with Differential, Hyrax and Haas expanders

OBJECTIVE

The aim of this study was to test the null hypothesis that there is no difference at the midpalatal suture opening after rapid maxillary expansion (RME) using Expander with Differential Opening (EDO), Hyrax-type and Haas-type expanders.

METHODS

Occlusal radiographs of 52 patients (19 males and 33 females; average age= 9.46?1.20 years) treated with RME were divided into three groups, according to the expander used: EDO (n=17), Hyrax-type (n=21) and Haas-type (n=14). The evaluated variables were: A) Distance between the maxillary central incisors at the incisal edge; B) Distance between the alveolar ridges at the midpalatal suture; C) Suture opening at 10-mm distance from the crest to posterior, at the midpalatal suture; D) Suture opening at 20-mm distance from the crest to posterior, at the midpalatal suture; and E) Suture opening at 30-mm distance from the crest to posterior, at the midpalatal suture. To assess the normality of variables, the Shapiro-Wilk test was performed. For intergroup comparison, ANOVA with a significance level of 5% was used.

RESULTS

At the region A, Hyrax-type (4.66 mm) and EDO (4.87 mm) groups presented larger openings than the Haas-type group (3.43 mm). In regions B and C, EDO showed a statistically significant greater opening than the Haas-type group. In region D, a smaller opening of the midpalatal suture was observed in the Haas-type group, compared to the Hyrax-type and EDO groups.

CONCLUSIONS

EDO and Hyrax-type produced greater immediate skeletal effects, compared with Haas-type, but these differences were about 1 mm and might not be clinically significant.

The predictability of the mandibular curve of Wilson, buccolingual crown inclination, and transverse expansion expression with Invisalign treatment

INTRODUCTION

This study aimed to provide an initial investigation into the mandibular curve of Wilson (COW) handling using the Invisalign appliance (Align Technology, Santa Clara, Calif). Individual buccolingual crown inclinations and transverse expansions were also investigated to detect any regions of ineffectiveness in the dental arch.

METHODS

A retrospective sample of patients treated by an experienced Invisalign provider in private practice was used. All adult patients with Class I or II Angle malocclusions and mild to moderate crowding treated using a minimum of 14 Invisalign aligners without intermaxillary elastics, bite ramps, or auxiliaries and a nonextraction mandibular arch from 2013-2019 were selected. Dental models at the initial scan, the ClinCheck prediction, and the outcome after the initial series of aligners were analyzed with Geomagic Control X software (version 2017.0.3; 3D systems, Rock Hill, SC). The COW, buccolingual crown inclination relative to the occlusal plane and cusp tip expansion were compared between ClinCheck changes and achieved changes.

RESULTS

Forty-two subjects met the selection criteria. 74% of subjects experienced a flatter COW than ClinCheck predictions, and the mean difference was 0.76 mm (P = 0.0149). The first molars encountered 0.52 mm (P <0.001) more buccal crown inclination than ClinCheck predictions. No other teeth experienced statistically significant buccolingual inclination differences to ClinCheck. The second molars were the only teeth to experience significantly more arch expansion than ClinCheck at 0.68 mm (P = 0.0046).

CONCLUSIONS

The Invisalign appliance tended to over-flatten the mandibular COW compared with ClinCheck because of the lack of buccal root torque in the mandibular first molars during expansion. The mandibular second molars were the only teeth to experience more expansion than ClinCheck.

Maxillary Expansion and Its Effects on Circummaxillary Structures: A Review

Transverse maxillary discrepancies are the most common. The narrowed upper arch is the most prevalent problem an orthodontist encounter while treating adolescent and adult patients. Maxillary expansion is a technique used to increase the upper arch's transverse dimension to apply forces to widen the upper arch. For young children, a narrow maxillary arch has to be corrected using orthopedic and orthodontic treatments. In an orthodontic treatment plan, it is crucial to update transverse maxillary defeat. There are various clinical manifestations associated with a transverse maxillary deficiency which include a narrow palate, crossbite mainly seen in posteriors (unilateral or bilateral), severe crowding in anterior teeth, and cone-shaped hypertrophy can be seen. Some frequently used therapies for constricted upper arch include slow maxillary expansion, rapid maxillary expansion, and surgically assisted rapid maxillary expansion. Slow maxillary expansion requires light and constant force, whereas rapid maxillary expansion needs heavy pressure for activation. The surgical-assisted rapid maxillary expansion has gradually become popular to correct transverse maxillary hypoplasia. The maxillary expansion has various consequences on the nasomaxillary complex. There are multiple effects of maxillary expansion on the nasomaxillary complex. Mainly, the effect is seen on the mid-palatine suture along with the palate, maxilla, mandible, temporomandibular joint, soft tissue, and anterior and posterior upper teeth. It also affects functions like speech and hearing. Information on maxillary expansion is provided in depth in the following review article, along with its various effects on the surrounding structure.

Effects of Rapid Maxillary Expansion on Upper Airway Volume in Growing Children: A Three-Dimensional Cone-Beam Computed Tomography Study

Background: Rapid maxillary expansion (RME) is a common orthodontic procedure that widens the maxillary arch to treat moderate to mild overcrowding and transverse skeletal and dental abnormalities. Orthodontic equipment applies lateral tension on posterior maxilla teeth or palate mucosa to the mid-palatal suture. The maxilla may grow transversely when force is applied at right angles to the mid-palatal suture, which is usually inactive in children and adolescents. This study used cone-beam computed tomography (CBCT) and an authorized upper respiratory airway volume measurement approach to compare RME cohort pharyngeal airway volume changes to healthy controls. Materials and Methods: This retrospective analysis included 52 RME patients and 52 healthy controls. The RME category's expansion regimen entailed twisting the screw of expansion on a tooth-attached Hyrax-type expansion equipment by 0.25 mm daily for at least 14 days. After six months, a few RME participants used fixed orthodontic gear. The comparison group used fixed orthodontic appliances for minor malocclusions without extractions (without RME). CBCT scans from 1021 orthodontic patients who visited a dental hospital between 2012 and 2022 were examined. The registry comprised only anonymized photographs. Volume, minimum cross-sectional area (MCA), molar width, and inter-molar width were measured before and after therapy. Results: The control group had 12227.12 mm³ at T0 and 15805.54 mm³ at T1. The control group's T0-T1 volume difference was statistically significant (p = 0.007). The RME group has 12884.84 mm³ at T0 and 17471.08 mm³ at T1. The RME group had a significant volume difference at T0 and T1 (p = 0.002). The volume RME effect was ±1011.92 and statistically insignificant. (p > 0.05). MCA in the control group was 126.04 mm² at T0 and 170.61 mm² at T1. MCA at T0 and T1 in the control group was statistically significant (p = 0.041). RME group MCA was 126.53 mm³ at T0 and 164.69 mm² at T1. The RME group had a significant volume difference at T0 and T1 (p = 0.002). The MCA, RME effect was 5.92 and statistically insignificant (p > 0.05). Both the control and RME groups had statistically significant volume and MCA differences at T0 and T1. However, the intergroup analysis showed no significant differences across the groups. Conclusion: Tooth-borne RME does not affect upper airway or MCA volume in children compared to controls. Upper airway changes were better with younger skeletal ages before treatment. The findings may aid RME for young children.

Comparison of rapid versus slow maxillary expansion on patient-reported outcome measures in growing patients: a systematic review and meta-analysis

BACKGROUND

No systematic review and meta-analysis are present in the literature comparing patient-reported outcome measures (PROMs) in rapid maxillary expansion (RME) versus slow maxillary expansion (SME) in growing patients.

OBJECTIVE

The objective of this systematic review was to compare PROMs in RME versus SME in growing patients.

MATERIALS AND METHODS

Electronic search in PubMed (MEDLINE), Cochrane Library, Scopus, Embase, Web of Science, and OpenGrey was conducted. Only RCTs were included. Inclusion criteria were: growing patients in the mixed dentition or early permanent dentition, mild-to-moderate maxillary transverse deficiency, dental crowding, treatment with fixed expanders for rapid and slow maxillary expansion. Risk of bias was assessed using RoB 2. GRADE statement was performed. The mean of the differences (MD) and the risk ratio (RR) were used for the aggregation of data. A random effect model was applied.

RESULTS

Two articles with a total of 157 patients were finally included in the systematic review and meta-analysis. One article was at low risk of bias, while one was at risk of bias with some concerns. Pain presence was less, though not statistically significant, in SME patients (RR = 2.02, 95%CI from 0.55 to 7.49, P = 0.29, I² = 95%, 2 studies, GRADE very low). Pain intensity was significantly lower in SME appliance in the first week of treatment (pooled MD = 0.86 favoring SME, 95%CI from 0.47 to 1.26, P < 0.0001, I² = 6%, 2 studies, GRADE moderate). There were no significant differences between the two groups in difficulty in speaking, difficulty in swallowing, hypersalivation, difficulty in hygiene, and patient and parent satisfaction.

CONCLUSIONS

Pain intensity was significantly lower in SME compared to RME during the first week of treatment. For the following weeks, there were no differences in pain between the two protocols.

Midpalatal Suture: Single-Cell RNA-Seq Reveals Intramembrane Ossification and Piezo2 Chondrogenic Mesenchymal Cell Involvement

The midpalatal suture is mainly responsible for the growth and development of the maxillary and resistance to rapid maxillary expansion (RME). It is essential for clinical researchers to explore the intramembrane ossification and to elucidate the underlying mechanism of the maturation and ossification process of the midpalatal suture to help identify the optimum time and force of RME. However, mechanistic studies associated with the midpalatal suture are rare. The aim of this present study is to create an intramembrane osteogenesis model for the midpalatal suture region of mice. Interestingly, we discovered a type of chondrogenic mesenchymal cell expressing Piezo2, which might be related to the detection of mechanical and external stimuli. This result provides a potential molecular and cellular mechanism that explains why the midpalatal suture is not closed until adulthood. We depict a landscape of mesenchymal cells that might play an important role in the intramembrane osteogenesis of the midpalatal suture and provide new perspectives on midpalate suture maturation and ossification, which might lead to further possibilities for clinical operations.

Three dimensional evaluation of the effect of rapid maxillary expansion on maxillary sinus volume

AIM

To compare the maxillary sinus volume (MSV) of posterior cross bite (PCB) patients before and after rapid maxillary expansion (RME) by cone-beam computed tomography (CBCT).

METHODS

A total of 24 patients' CBCT scans that underwent RME therapy for their orthodontic treatment were used. CBCTs were obtained before (T1), immediately after (T2), and 6 months after (T3) RME. MSVs were calculated by using the 3D module of Dolphin 11.0 software. Repeated measures ANOVA (RMANOVA) was used to identify the MSV differences.

RESULTS

The results showed no significant differences between the right and left MSVs of the T1 group (p>.05). No significant differences were found between the right and left side MSV of the T2 group (p>.05). There were no significant differences between the right and left side MSV of the T3 group (p>.05). According to the intergroup comparisons, the RMANOVA test results revealed statistically significant right (F = 459.37, p<.001), left (F = 409.34, p<.001), and mean (F = 489.33, p<.001) MSV differences between groups. Multiple comparisons of the right, left, and mean MSV between the T1 and T2, T2 and T3, and T1 and T3 groups with Bonferroni's test revealed no significant differences between the T1 and T2 (p>.05) and T2 and T3 (p>.05) groups. However, significant differences were found in the right (p<.05), left (p<.05), and mean (p<.05) MSV between the T1 and T3 groups. The right, left, and mean MSV of the T3 group were significantly higher than those of the T1 group.

CONCLUSION

No significant change was detected in the MSV immediately after RME. However, MSV was significantly increased at the end of the retention period.

Does MARPE therapy have effects on intracranial pressure? a clinical study

Background

We aimed to evaluate possible intracranial pressure (ICP) changes caused by screw activations during active microimplant-assisted rapid palatal expansion (MARPE) therapy of post-pubertal individuals by measuring the optic nerve sheath diameter (ONSD) under ultrasonography (US) guidance.

Methods

This study’s participants comprised 15 patients (7 males, 8 females) with posterior crossbite and a mean age of 16.7 years (14.25–20.08 years). The Maxillary Skeletal Expander (MSE) appliance was used to perform MARPE in all patients. Their vital signs (heart rate, mean arterial pressure (MAP), and peripheral oxygen saturation (SpO₂)) were recorded. The ONSD was measured by US immediately before the first screw activation (T0), and the measurements were repeated 1 min (T1) and 10 min (T2) after the first activation. In the last session of active MARPE therapy, the same measurement protocol was performed as in the first activation session (T3, T4, and T5). The patients’ perceptions of pain during the screw activation were also noted at T1 and T4 using a four-category verbal rating scale (VRS-4). The significant differences among different time intervals performed with the Friedman test (for all tested variables; SpO2, MAP, Heart Rate, VRS-4 and ONSD). Spearman correlation test was used for VRS-4 and ONSD comparisons. The statistical significance level was accepted as p < 0.05.

Results

The ONSD values ​​(T1 and T4) relatively increased within 1 min after screw activation but did not reach a statistically significant level (p > 0.05). There was also no significant difference between the initial (T0) and the final (T5) ONSD values ​​during the active MARPE therapy (p > 0.05).

Conclusion

There is no changes or alterations in intracranial pressure in late adolescents during active MARPE therapy.

Supplementary information

The online version contains supplementary material available at 10.1186/s12903-022-02482-x.

Midpalatal suture bone repair after miniscrew-assisted rapid palatal expansion in adults

Background

Midpalatal suture (MPS) repair in growing patients after RPE has been previously reported. However, differences between young and adult patients for timing and pattern of MPS repair after rapid maxillary expansion are expected. The aim of this study was to evaluate the midpalatal suture repair pattern after miniscrew-assisted rapid palatal expansion (MARPE) in adult patients.

Materials and methods

The study included 21 patients (six males, 15 females) successfully treated with MARPE with a mean initial age of 29.1 years of age (SD = 8.0; range = 20.1–45.1). MPS repair was evaluated using maxillary axial and coronal sections derived from CBCT exams taken 16 months after the expansion (SD = 5.9). Objective and subjective assessments of MPS repair were performed. Objective assessments were performed measuring MPS bone density at anterior, median and posterior region of hard palate. Pre-expansion and post-retention bone density changes were evaluated using paired t tests (p < 0.05). Midpalatal suture bone repair was scored 0 to 3 considering, respectively, the complete absence of bone repair in the MPS, the repair of less than 50% of the MPS, the repair of more than 50% of the MPS and the complete repair of the MPS. Intra- and interexaminer reliability evaluation were assessed using Kappa coefficient.

Results

The objective evaluation showed a significant higher bone density at the pre-expansion stage in all palatal regions. The reliability of the subjective method was adequate with intra- and interexaminer agreements varying from 0.807 to 0.904. Scores 1, 2 and 3 were found in 19.05%, 38.09% and 42.86% of the sample, respectively. The most common region demonstrating absence of bone repair was the middle third. The anterior third of the midpalatal suture was repaired in all patients.

Conclusions

A decreased bone density was observed after the retention period when compared to pre-expansion stage. Most adult patients demonstrated incomplete repair of the midpalatal suture 16 months after MARPE. However, adequate bone repair covering more than half of the hard palate extension was observed in 80.95% of the patients.

Rapid Maxillary Expansion and Upper Airway Volume: Systematic Review and Meta-analysis on the Role of Rapid Maxillary Expansion in Mouth Breathing

Objective

Rapid maxillary expansion (RME) has been extensively used in orthodontic practice for over a century, and it is claimed to benefit upper airway morphology. However, its effect in actually alleviating mouth breathing has remained unexplored. This systematic review was planned with an objective to provide a comprehensive synthesis of the effects of RME on upper airway volume and most importantly, its role in alleviating mouth breathing.

Methods

A literature search of electronic databases were done for the time period of 2000-2018. Randomized controlled trials (RCTs) and non-RCTs conducted on 8-15-year-old children who received bonded or banded RME and upper airway measured using three-dimensional (3D) imaging were included.

Results

Twelve studies (two RCTs, nine nonrandomized clinical trials, and one non-RCT) were included in this systematic review, and nine studies were included for meta-analysis. Among the evaluated parameters, nasal cavity volume showed a significant increase which was maintained even after the retention phase, whereas nasopharyngeal and oropharyngeal volume did not report a significant change.

Conclusion

Based on this systematic review, it can be concluded that RME causes a significant increase in nasal cavity volume, but its effect on nasopharyngeal and oropharyngeal volume is not statistically significant in majority of studies. This increase in volume may not be considered as an equivalent for enhancement of airway and function unless proven so. In order to establish its significance in the improvement of breathing, it is necessary to conduct more well-designed RCTs with samples actually comprising mouth breathers.

How to cite this article

Balasubramanian S, Kalaskar R, Kalaskar A. Rapid Maxillary Expansion and Upper Airway Volume: Systematic Review and Meta-analysis on the Role of Rapid Maxillary Expansion in Mouth Breathing. Int J Clin Pediatr Dent 2022;15(5):617-630.

Influence of the palatal plane cant and skeletal patterns in the hard palate thickness?

INTRODUCTION

The aim of the present study was to evaluate the thickness of the hard palate at the different angles formed by the palatal plane and the Frankfort horizontal line using computed tomography in patients with different facial patterns for planning the installation of MARPE.

MATERIALS AND METHODS

The measurements were analysed in the hard palate of 106 patients. Four regions were selected passing through the mesial face, tangent at the level of the cemento-enamel junction of the premolars and molars. The bone thickness was measured from the floor of the nasal cavity to the cortical bone of the hard palate, 02 measurements with a distance of 05 mm between them (2.5 mm on each side starting from the midsagittal line) and 2 more with a distance of 7 mm between measurements (3.5 mm on each side starting from the midsagittal line). The palatal plane cant was determined based on the palatal plane and the Frankfort horizontal plane. The sagittal skeletal pattern was determined based on the ANB angle and the vertical skeletal pattern based on the SN.Go.Gn angle.

RESULTS

Palatal bone thickness was greater in males than in females. Regarding the sagittal skeletal pattern, patients with Class II were found to have a thinner hard palate than Class I and Class III patients. No difference in the vertical skeletal pattern was observed between groups. Regarding the palatal plane cant, bone thickness was greater in patients with clockwise rotation.

CONCLUSIONS

Careful planning should be considered in the case of female patients; patients with greater angles of the palatal plane cant and Class II patients have a smaller bone thickness.

Effect and stability of miniscrew-assisted rapid palatal expansion: A systematic review and meta-analysis

Objective

This study aimed to systematically analyze the effect and stability of miniscrew-assisted rapid palatal expansion (MARPE) to provide a reference for the clinical treatment of patients with maxillary transverse deficiency (MTD).

Methods

We searched PubMed, Science Direct, Web of Science, Embase, Cochrane Library, CNKI, and Wanfang Database for relevant studies published before February 18, 2021 and selected them according to the eligibility criteria. The Cochrane Handbook for Systematic Reviews (version 5.1.0) criteria were used for the quality assessment of randomized controlled trials, while the scoring protocol of the methodological index for non-randomized studies was used for non-randomized controlled trials. Statistical analysis was performed using the RevMan5.3 software.

Results

All the included studies showed a relatively high success rate of expansion. The changes in both the intermolar and alveolar widths after MARPE were statistically significant. MARPE exhibited greater skeletal expansion effects than did conventional RPE. The midpalatal suture was opened in parallel after MARPE. A small amount of relapse was observed 1 year after expansion. MARPE caused tooth inclination and a decrease in alveolar height, but it was less significant than in conventional RPE.

Conclusions

MARPE may be an effective treatment modality for patients with MTD. It causes great transverse skeletal expansion in late adolescence. In comparison to conventional RPE, MARPE has lower detrimental periodontal effects and has certain clinical advantages.

Midpalatal Suture CBCT Image Quantitive Characteristics Analysis Based on Machine Learning Algorithm Construction and Optimization

Background: Midpalatal suture maturation and ossification status is the basis for appraising maxillary transverse developmental status. Methods: We established a midpalatal suture cone-beam computed tomography (CBCT) normalized database of the growth population, including 1006 CBCT files from 690 participants younger than 24 years old. The midpalatal suture region of interest (ROI) labeling was completed by two experienced clinical experts. The CBCT image fusion algorithm and image texture feature analysis algorithm were constructed and optimized. The age range prediction convolutional neural network (CNN) was conducted and tested. Results: The midpalatal suture fusion images contain complete semantic information for appraising midpalatal suture maturation and ossification status during the fast growth and development period. Correlation and homogeneity are the two texture features with the strongest relevance to chronological age. The overall performance of the age range prediction CNN model is satisfactory, especially in the 4 to 10 years range and the 17 to 23 years range, while for the 13 to 14 years range, the model performance is compromised. Conclusions: The image fusion algorithm can help show the overall perspective of the midpalatal suture in one fused image effectively. Furthermore, clinical decisions for maxillary transverse deficiency should be appraised by midpalatal suture image features directly rather than by age, especially in the 13 to 14 years range.

Changes in the Mandible Following Rapid Maxillary Expansion in Children with Class II Malocclusion: A Systematic Review

Objective: The aim of this systematic review was to determine whether rapid maxillary expansion (RME) allows favorable changes in the mandible during the treatment of class II malocclusion before the growth spurt. Methods: A search of Pubmed/Medline, the Science Direct, and the Google Scholar database was performed. The keywords used were: orthodontics, rapid maxillary expansion, class II, and growing patients. Relevant articles were assessed for quality according to Cochrane guidelines, and then changes in SNA, SNB, ANB, NL-NSL (or SN-SNP.SNA), and ML-NSL (or SN-Go-Gn) relationships were analyzed. Results: The selection process brought forth five articles, including 162 patients (91 females, 71 males) for detailed analysis. The quality of the evidence (GRADE) for comparisons and outcomes was assessed as moderate for SNB and ANB and as low or very low for other variables. Conclusions: The results of this systematic review showed that there is a small body of moderate-quality evidence for statistically and clinically favorable changes in SNB and ANB angles and a small body of low-quality evidence for changes in vertical parameters after RME.

Maxillary Skeletal Expansion with Monocortical and Bicortical Miniscrew Anchorage: A 3D Finite Element Study

The aim of the present study is to use a 3D finite element analysis to investigate and compare the transverse displacement and stress distribution between stainless steel miniscrews and titanium alloy miniscrews used for monocortical and bicortical anchorage during miniscrew-assisted rapid maxillary expansions. Skull models were constructed to depict expansion after and before midpalatal suture opening at varying miniscrew insertion depths in four clinical scenarios: monocortical, monocortical deepening, bicortical, and bicortical deepening. Finite element analyses of miniscrew properties, including transverse displacement and von Mises stress distribution, were performed for each clinical scenario. Peri-implant stress was lesser in both bicortical anchorage models compared to both monocortical models. Transverse displacement in the coronal and axial planes was also greater and more parallel in both bicortical models compared to both monocortical models. Transverse displacement and peri-implant stress did not significantly differ between monocortical and monocortical deepening models or between bicortical and bicortical deepening models. From a biomechanical perspective, the bicortical deepening miniscrew anchorage is preferable to monocortical and monocortical deepening anchorage, because bicortical anchorage induces less stress on the peri-implant bone. Consequently, bicortical deepening anchorage should be considered the preferred option in challenging clinical scenarios in which strong anchorage is required for maxillary skeletal expansion.

Evaluation of the effects of different rapid maxillary expansion appliances on airway by acoustic rhinometry: A randomized clinical trial

OBJECTIVE

The purpose of this 3-arm parallel trial was to compare the effects of tooth tissue-borne (TTB), tooth-borne (TB) and bone-borne (BB) rapid maxillary expansion (RME) appliances on nasal airway with acoustic rhinometry (AR).

SETTING AND SAMPLE POPULATION

Forty-six 12- to 14-year-old patients with narrow maxilla were randomly allocated into 3 study groups accordingly the type of expander: TTB, TB and BB. The participants were recruited from the Department of Orthodontics, Izmir Katip Celebi University.

MATERIALS AND METHODS

All patients had RME with an initial activation of two-quarter turns a day (0.5 mm) for an average of 8 days followed by 1 quarter turns per day for an average of 10 days. Disguised group allocation using opaque sealed envelopes was made with a computer-generated randomization program. The primary outcome was changes on the minimal nasal cross-sectional area (MCA). Secondary outcome included the assessment of nasal cavity volume. AR measurements were obtained at baseline (T0), immediately after the expansion (T1), and at 3 months-follow-up (T2). One-way analysis of variance (ANOVA) and Bonferroni test were used for inter-group comparison and two-way ANOVA was used for intra-group evaluation.

RESULTS

There were significant increases in MCA 1, 2 and nasal Vol in all groups after the treatment (95% [CI], P < 0.05) whereas in inter-group comparisons; MCA 1, 2 and nasal Vol, the changes were found to be similar (95% [CI], P > 0.05).

HARMS

No serious harm was observed except for mild gingivitis due to plaque accumulation.

CONCLUSIONS

RME treatment increased minimal nasal cross-sectional areas and nasal volume irrespective of appliance design.

TRIAL REGISTRATION

This trial was registered at Clinicaltrials.gov (Identifier NCT04529057).

PROTOCOL

The protocol was not published.

FUNDING

This trial was financed by Izmir Katip Celebi University, Scientific Research Projects Unit [grant number 2016-TDR-SABE-0024].

Differences in dentoskeletal and soft tissue changes due to rapid maxillary expansion using a tooth-borne expander between adolescents and adults: A retrospective observational study

Objective

The purpose of this study was to compare the differences in dentoskeletal and soft tissue changes following conventional tooth-borne rapid maxillary expansion (RME) between adolescents and adults.

Methods

Dentoskeletal and soft tissue variables of 17 adolescents and 17 adults were analyzed on posteroanterior and lateral cephalograms and frontal photographs at pretreatment (T1) and after conventional RME using tooth-borne expanders (T2). Changes in variables within each group between T1 and T2 were analyzed using Wilcoxon signed-rank test. Mann–Whitney U test was used to determine the differences in the pretreatment age, expansion and post-expansion durations, and dentoskeletal and soft tissue changes after RME between the groups. Spearman’s correlation between pretreatment age and transverse dentoskeletal changes in the adolescent group was calculated.

Results

Despite similar amounts of expansion at the crown level in both groups, the adult group underwent less skeletal expansion with less intermolar root expansion after RME than the adolescent group. The skeletal vertical dimension increased significantly in both groups without significant intergroup difference. The anteroposterior position of the maxilla was maintained in both groups, while a greater backward displacement of the mandible was evident in the adult group than that in the adolescent group after RME. The soft tissue alar width increased in both groups without a significant intergroup difference. In the adolescent group, pretreatment age was not significantly correlated with transverse dentoskeletal changes.

Conclusions

Conventional RME may induce similar soft tissue changes but different dentoskeletal changes between adolescents and adults.

Three-dimensional palatal morphology and upper arch changes following nonsurgical and surgical maxillary expansion in adults

OBJECTIVE

The objective of this study was to evaluate the effects of nonsurgical rapid maxillary expansion (RME) and surgically assisted RME (SARME) on palatal morphology and upper arch dimensions using three-dimensional (3D) models in skeletally mature patients.

STUDY DESIGN

Thirty-eight skeletally mature patients with a maxillary transverse deficiency were divided into RME and SARME groups. Nineteen patients in the RME group (mean age, 19.16 ± 2.25 years) were treated using a full-coverage bonded acrylic splint expander; 19 patients in the SARME group (mean age, 20.38 ± 3.36) were treated using the banded palatal expansion appliance with hyrax screws. The 3D models were obtained before and after expansion. The maxillary dental arch widths, maxillary first molar angulation, palatal area, and palatal volume were calculated on the 3D models.

RESULTS

All variables showed statistically significant changes after the retention period (P < .001). The maxillary arch width between first premolars (P < .05), the palatal area (P < .01), and the palatal volume (P < .05) significantly increased in the SARME group compared to the RME group. The maxillary first molar tipping in the RME group was significantly higher than that in the SARME group (P < .01).

CONCLUSIONS

Although SARME has more positive effects in skeletally mature patients, nonsurgical RME can be considered as an alternative by evaluating surgical risks, periodontal status, and the need for skeletal expansion.

New bone-generative effect of Salvia officinalis L. in the expanded midpalatal suture : An in vivo and in vitro study

PURPOSE

The aims of this study were to evaluate the effects of systemic administration of Salvia officinalis Linnaeus (L.) leaf extract on new bone formation in the expanded premaxillary suture in rats in vivo and to examine the antioxidant effects and phenolic profile of Salvia officinalis (SO) leaf and root extracts in vitro.

METHODS

Fourteen male Sprague Dawley rats were allocated to two groups: SO group (n = 7) and control group (n = 7). An open-loop spring was attached to the upper incisors of each rat to expand the premaxillae. A 5-day expansion period followed by a 12-day retention period was observed. The rats in the SO group received systemic administration of 20 mg SO/kg/day via the orogastric route for 17 days. Histomorphometric examinations were carried out to examine the amount of new bone formation, number of capillaries, and intensity of inflammatory cell response. Immunohistochemical analysis was conducted to examine the number of osteoblasts and osteoclasts. Leaf and root extracts of SO were also analyzed for antioxidant activity and phenolic compounds in vitro.

RESULTS

Statistical analysis showed that the following were higher in the SO group than in the control group: new bone formation, number of osteoblasts and osteoclasts, intensity of inflammatory cell response (neutrophils, lymphocytes, and macrophages), and number of capillaries. The major compound identified in SO leaf extract was rosmarinic acid, while luteolin derivatives, salvianolic acid F, and medioresinol were also present.

CONCLUSIONS

Salvia officinalis L. from leaf extract provided antioxidant effects and stimulated enhanced new bone formation in the expanded midpalatal suture after maxillary expansion in rats.

Surgically assisted rapid palatal expansion (SARPE): three-dimensional superimposition on cranial base

OBJECTIVES

To evaluate dental and skeletal changes caused by surgically assisted rapid palatal expansion (SARPE) using the superimposition of three-dimensional cone-beam computed tomography (CBCT) images on the cranial base.

MATERIAL AND METHODS

This is a retrospective quasi-experiment before-and-after study using a convenience sample. Twenty-four adult patients (13 male and 11 female) were evaluated before SARPE (T0), immediately after expansion (T1), and after 6 months of retention (T2). CBCT scans were superimposed on the anterior cranial base using voxel-based registration. Measurements from different reference points were used for comparisons between times.

RESULTS

At T1, all teeth had significant buccal tipping. At T2, most teeth remained in the same position as at T1, except the first premolar and the first molar, whose buccal roots moved slightly. The amount of bony expansion was 65 to 70% of the amount of tooth movement. The A point and maxillary incisors moved anteriorly from T0 to T1 and T2 (p < 0.0001). Inter-nasal distance had increased significantly at T1 (p < 0.0001) and remained stable at T2 (p = 0.478). No expansion was achieved at the zygomatic arch (p = 0.114).

CONCLUSION

SARPE promoted substantial buccal tipping of posterior teeth and some bone displacement; it also moved the maxilla and teeth forward and increased nasal width.

CLINICAL RELEVANCE

No other clinical studies have evaluated dental and skeletal changes caused by SARPE using superimposition of 3D CBCT images on the cranial base. This study findings may help clinical dentists plan treatments using safe and reliable information.

Short-term skeletal and dentoalveolar effects of overexpansion

OBJECTIVES

To evaluate whether the amount of rapid maxillary expansion differentially affects the skeletal and dentoalveolar changes that occur.

MATERIALS AND METHODS

This randomized controlled trial included 23 patients who had rapid maxillary expansion (RME). Subjects were randomly assigned to a conventional expansion control group (n = 12) or an overexpansion group (n = 11), who started treatment at 13.2 ± 1.5 and 13.8 ± 1 years of age, respectively. Cone beam computed tomography scans (11 cm) were obtained prior to rapid maxillary expander (RME) delivery and approximately 3.7 months later. Initial hand-wrist radiographs were used to determine the participants' skeletal maturity.

RESULTS

The RME screws were activated 5.6 ± 1.2 mm and 10.1 ± 0.6 mm in the conventional and overexpansion groups, respectively. Overexpansion produced significantly greater expansion of the nasal cavity (2.1X-2.5X), maxillary base (2.3X), buccal alveolar crest (1.4X), and greater palatine foramina (1.9X). Significantly greater intermolar width increases (1.8X) and molar inclination (2.8X) changes were also produced. The nasal cavity and maxillary base expanded 23%-32% as much as the screws were activated. Skeletal expansion was positively correlated with RME screw activation (R = 0.61 to 0.70) and negatively correlated (R = -0.56 to -0.64) with the patients' skeletal maturation indicators (SMIs). Together, screw activation and the patients' SMI scores explained 48%-66% of the variation in skeletal expansion.

CONCLUSIONS

This pilot study shows that overexpansion produces greater changes than conventional expansion, with greater skeletal effects among less mature patients.

Comparison of dentoskeletal and soft tissue changes between tooth-borne and tooth-bone-borne hybrid nonsurgical rapid maxillary expansions in adults: a retrospective observational study

BACKGROUND

Despite the gradual increase in the use of rapid maxillary expansion (RME), specifically RME with the aid of skeletal anchorage in adults, there have been no reports comparing dentoskeletal and soft tissue changes between nonsurgical tooth-borne and tooth-bone-borne RMEs in adults. This study aimed to analyse differences in dentoskeletal and soft tissue changes between tooth-borne and tooth-bone-borne RMEs using a similar appliance design and the same expansion protocol in adult patients.

METHODS

Twenty-one patients with tooth-borne expansion (a conventional expansion screw with two premolars and two molar bands for dental anchorage [T-RME]) and the same number of patients with tooth-bone-borne hybrid expansion (a conventional expansion screw with two premolar and two molar bands for dental anchorage and four mini-implants in the palate for skeletal anchorage [H-RME]) were included. Dentoskeletal and soft tissue variables at pretreatment (T1) and after expansion (T2) were measured using posteroanterior and lateral cephalograms and frontal photographs. The sex distribution of the two groups was analysed using the chi-square test, and the change after RME in each group was evaluated using the Wilcoxon signed-rank test. Differences in pretreatment age, expansion duration, post-expansion duration, and dentoskeletal and soft tissue changes after RME between the two groups were determined using the Mann-Whitney U test.

RESULTS

There were no significant differences in the expansion protocol, pretreatment conditions, and sex distribution between the two groups. Despite similar degrees of dental expansion at the crown level between the two groups, H-RME induced increased skeletal and parallel expansion of the maxilla compared to T-RME. After expansion, H-RME demonstrated increased forward displacement of the maxilla without significant changes in the vertical dimension, while T-RME exhibited increased backward displacement of the mandible, increased vertical dimension, and decreased overbite. Both groups showed significant retroclination and extrusion of the maxillary incisors without significant intergroup differences. There were no significant soft tissue changes between the two groups.

CONCLUSION

This study suggests that using skeletal anchorage in RME may induce increased skeletal and parallel expansion of the maxilla without significant effects on the vertical dimension.

The Diagnosis Methods and Management Modalities of Maxillary Transverse Discrepancy

Transverse deficiency of the maxilla (TDM) is the most common skeletal change that involves the maxilla. The craniofacial skeletal assessment as early as possible is critical, as the early diagnosis of TDM influences the effectiveness of treatment. Methods for treating TDM have been reported since the mid-19th century and continue to evolve. This article puts forward a literature review on the topic, investigating the diagnosis and management of TDM, as well as stability after surgical and nonsurgical interventions. We conducted a literature search using a logical combination of the terms “palatal extension,” “maxillary transverse deficiency,” “diagnosis,” and “management.” More recent approaches include three-dimensional imaging, which has allowed for accurate depictions of the craniofacial region to be examined, allowing for evaluation of the spatial relationships between the jaw elements. The success of nonsurgical management compared to surgical management depends on the growth stage of the patient. Unfortunately, data comparing the stability of surgical and nonsurgical management is still lacking. However, for surgical intervention, surgically assisted palatal expansion (SARPE) appears to be the appropriate choice, especially when a large expansion is needed.

Age-dependent effects of transverse maxillary deficiency treated by microimplant-assisted rapid palatal expansion: A prospective cone-beam computed tomography study

INTRODUCTION

This study investigated the results of maxillary discrepancy treated by microimplant-assisted rapid palatal expansion (MARPE) at different ages.

METHODS

Sixty patients (aged 11.0-34.1 years; 23 male and 37 female) were treated by MARPE. Cone-beam computed tomography scans and dental casts were taken before and after expansion. The data were compared among 4 age groups: early adolescents (aged 11-14 years), late adolescents (aged 15-19 years), young adults (aged 20-24 years), and old adults (aged 25-34.1 years).

RESULTS

The success rates of midpalatal suture separation were 100%, 100%, 88.2%, and 85.7% for early adolescents, late adolescents, young adults, and old adults, respectively. Palatal sutures at the level of the first molar were expanded by 4.02 mm, 3.48 mm, 2.63 mm, and 2.10 mm, corresponding to 66.7%, 58.1%, 42.0%, and 37.9% of the total dental expansion. Significant differences were found in the amounts of palatal suture expansion and the ratio of skeletal dental expansion between patients aged <20 years and patients aged ≥20 years (P <0.05). Skeletal expansion constituted 69.4%, 51.3%, 39.0%, and 29.8% of the total screw expansion. Except for the comparison between young adults and old adults, there were significant differences between groups for the ratio of skeletal screw expansion (P <0.05).

CONCLUSIONS

The midpalatal suture can be expanded by MARPE more easily in patients <20 years of age than in patients ≥20 years of age. The ratio of skeletal screw expansion decreases as age increases.

Effect of methylphenidate at different doses on new bone formation with rapid maxillary expansion: A micro-CT and histomorphometric study in rats

OBJECTIVES

This study aimed to evaluate the effect of systemically administered methylphenidate hydrochloride (MPH) on new bone formation in premaxillary suture after rapid maxillary expansion (RME).

SETTING AND SAMPLE POPULATION

Thirty-three Wistar rats were divided into four groups: Group 1 (high dose, 30/60 mg/kg MPH), Group 2 (low dose, 4/10 mg/kg MPH), Group 3 (positive control) and Group 4 (negative control).

METHODS

RME was applied on the 70th day of the study. A 5-day RME period was followed by a 12-day retention period. The experiment was terminated on the 87th day. Micro-CT for radiological evaluation, haematoxylin-eosin and Masson's trichrome staining methods were used for histomorphometric evaluation.

RESULTS

Among experimental groups with RME, the lowest number of osteoblasts and capillaries in Group 1 (P < .05). New bone formation, fibrous callus formation, distal osteotomy line, proximal osteotomy union and cortex remodelling were observed to be lower in Group 1 and Group 2 than Group 3 (P < .05). There was a statistically significant difference between Group 4 and each of the other groups (P = .000) in the evaluation of the results for bone mineral density, bone volume, bone volume percentage, trabecular thickness and trabecular number.

CONCLUSIONS

MPH reduces cellular activity for new bone formation in suture in RME groups. Before performing rapid maxillary expansion in patients using MPH, the use of the drug should be postponed after a multidisciplinary decision process or clinical doses should be lowered.