From neural chip and engineered biomolecules to bioelectronic devices: an overview

Nanoscale visualization of phase separation in binary supported lipid monolayer using tip-enhanced Raman spectroscopy

Supported lipid membranes are an important model system to study the phase separation behavior at the nanoscale. However, the conventional nanoanalytical tools often fail to provide reliable chemical characterization of the phase separated domains in a non-destructive and label-free manner. This study demonstrates the application of scanning tunneling microscopy-based tip-enhanced Raman spectroscopy (TERS) to study the nanoscale phase separation in supported d62-DPPC : DOPC lipid monolayers. Hyperspectral TERS imaging successfully revealed a clear segregation of the d62-DPPC-rich and DOPC-rich domains. Interestingly, nanoscale deposits of d62-DPPC were observed inside the DOPC-rich domains and vice versa. High-resolution TERS imaging also revealed the presence of a 40-120 nm wide interfacial region between the d62-DPPC-rich and DOPC-rich domains signifying a smooth transition rather than a sharp boundary between them. The novel insights obtained in this study demonstrate the effectiveness of TERS in studying binary lipid monolayers at the nanoscale.

Biodegradable Piezoelectric Polymers: Recent Advancements in Materials and Applications

Recent materials, microfabrication, and biotechnology improvements have introduced numerous exciting bioelectronic devices based on piezoelectric materials. There is an intriguing evolution from conventional unrecyclable materials to biodegradable, green, and biocompatible functional materials. As a fundamental electromechanical coupling material in numerous applications, novel piezoelectric materials with a feature of degradability and desired electrical and mechanical properties are being developed for future wearable and implantable bioelectronics. These bioelectronics can be easily integrated with biological systems for applications, including sensing physiological signals, diagnosing medical problems, opening the blood-brain barrier, and stimulating healing or tissue growth. Therefore, the generation of piezoelectricity from natural and synthetic bioresorbable polymers has drawn great attention in the research field. Herein, the significant and recent advancements in biodegradable piezoelectric materials, including natural and synthetic polymers, their principles, advanced applications, and challenges for medical uses, are reviewed thoroughly. The degradation methods of these piezoelectric materials through in vitro and in vivo studies are also investigated. These improvements in biodegradable piezoelectric materials and microsystems could enable new applications in the biomedical field. In the end, potential research opportunities regarding the practical applications are pointed out that might be significant for new materials research.

Polylactic Acid Piezo-Biopolymers: Chemistry, Structural Evolution, Fabrication Methods, and Tissue Engineering Applications

Polylactide acid (PLA), as an FDA-approved biomaterial, has been widely applied due to its unique merits, such as its biocompatibility, biodegradability, and piezoelectricity. Numerous utilizations, including sensors, actuators, and bio-application-its most exciting application to promote cell migration, differentiation, growth, and protein-surface interaction-originate from the piezoelectricity effect. Since PLA exhibits piezoelectricity in both crystalline structure and an amorphous state, it is crucial to study it closely to understand the source of such a phenomenon. In this respect, in the current study, we first reviewed the methods promoting piezoelectricity. The present work is a comprehensive review that was conducted to promote the low piezoelectric constant of PLA in numerous procedures. In this respect, its chemistry and structural origins have been explored in detail. Combining any other variables to induce a specific application or to improve any PLA barriers, namely, its hydrophobicity, poor electrical conductivity, or the tuning of its mechanical properties, especially in the application of cardiovascular tissue engineering, is also discussed wherever relevant.

Design of an Extreme Low Cutoff Frequency Highpass Frontend for CMOS ISFET via Direct Tunneling Principle

In this work, ISFET frontends utilising the direct tunneling current to eliminate trapped charge are proposed. The principle has been investigated and verified via silicon-imitated ISFET first, where silicon capacitors are used to imitate the passivation ones. Because the dominant tunneling components depend on the potential difference between Gate and Drain terminals, a source-follower structure could itself perform a highpass filter with time constant at 10-100 seconds level. Additionally, a time-constant regulation mechanism is presented by feeding the output signal back to the drain terminal of ISFETs, achieving a regulation factor over 50, namely from 4.7 seconds to 243.4 seconds in our implementation. Afterwards in chemical test, proposed ISFETs have been verified in terms of unit passivation capacitance, linearity, noise and sensitivity for ISFETs with 3 different top metal areas. It is found that approximately 30.12 mV/pH sensitivity can be achieved, and for the first time we managed to derive the relation between chemical flicker noise and sensing metal area.

Degradable Piezoelectric Biomaterials for Wearable and Implantable Bioelectronics

Current bioelectronics are facing a paradigm shift from old-fashioned unrecyclable materials to green and degradable functional materials with desired biocompatibility. As an essential electromechanical coupling component in many bioelectronics, new piezoelectric materials are being developed with biodegradability, as well as desired mechanical and electromechanical properties for the next generation implantable and wearable bioelectronics. In this review, we provide an overview of the major advancements in biodegradable piezoelectric materials. Different natural (such as peptide, amino acids, proteins, cellulose, chitin, silk, collagen, and M13 phage) and synthetic piezoelectric materials (such as polylactic acid) are discussed to reveal the underlying electromechanical coupling mechanism at the molecular level, together with typical approaches to the alignment of orientation and polarization to boost their electromechanical performance. Meanwhile, in vivo and in vitro degradation manners of those piezoelectric materials are summarized and compared. Representative developments of typical electronic prototypes leveraging these materials are also discussed. At last, challenges toward practical applications are pointed out together with potential research opportunities that might be critical in this new materials research area.

Langmuir-Blodgett nanotemplates for protein crystallography

The new generation of synchrotrons and microfocused beamlines has enabled great progress in X-ray protein crystallography, resulting in new 3D atomic structures for proteins of high interest to the pharmaceutical industry and life sciences. It is, however, often still challenging to produce protein crystals of sufficient size and quality (order, intensity of diffraction, radiation stability). In this protocol, we provide instructions for performing the Langmuir-Blodgett (LB) nanotemplate method, a crystallization approach that can be used for any protein (including membrane proteins). We describe how to produce highly ordered 2D LB protein monolayers at the air-water interface and deposit them on glass slides. LB-film formation can be observed by surface-pressure measurements and Brewster angle microscopy (BAM), although its quality can be characterized by atomic force microscopy (AFM) and nanogravimetry. Such films are then used as a 2D template for triggering 3D protein crystal formation by hanging-drop vapor diffusion. The procedure for forming the 2D template takes a few minutes. Structural information about the protein reorganization in the LB film during the crystallization process on the nano level can be obtained using an in situ submicron GISAXS (grazing-incidence small-angle X-ray scattering) method. MicroGISAXS spectra, measured directly at the interface of the LB films and protein solution in real time, as described in this protocol, can be interpreted in terms of the buildup of layers, islands, or holes. In our experience, the obtained LB crystals take 1-10 d to prepare and they are more ordered and radiation stable as compared with those produced using other crystallization methods.

Advances in nanowire bioelectronics

Semiconductor nanowires represent powerful building blocks for next generation bioelectronics given their attractive properties, including nanometer-scale footprint comparable to subcellular structures and bio-molecules, configurable in nonstandard device geometries readily interfaced with biological systems, high surface-to-volume ratios, fast signal responses, and minimum consumption of energy. In this review article, we summarize recent progress in the field of nanowire bioelectronics with a focus primarily on silicon nanowire field-effect transistor biosensors. First, the synthesis and assembly of semiconductor nanowires will be described, including the basics of nanowire FETs crucial to their configuration as biosensors. Second, we will introduce and review recent results in nanowire bioelectronics for biomedical applications ranging from label-free sensing of biomolecules, to extracellular and intracellular electrophysiological recording.

Specific Neuron Placement on Gold and Silicon Nitride-Patterned Substrates through a Two-Step Functionalization Method

The control of neuron-substrate adhesion has been always a challenge for fabricating neuron-based cell chips and in particular for multielectrode array (MEA) devices, which warrants the investigation of the electrophysiological activity of neuronal networks. The recent introduction of high-density chips based on the complementary metal oxide semiconductor (CMOS) technology, integrating thousands of electrodes, improved the possibility to sense large networks and raised the challenge to develop newly adapted functionalization techniques to further increase neuron electrode localization to avoid the positioning of cells out of the recording area. Here, we present a simple and straightforward chemical functionalization method that leads to the precise and exclusive positioning of the neural cell bodies onto modified electrodes and inhibits, at the same time, cellular adhesion in the surrounding insulator areas. Different from other approaches, this technique does not require any adhesion molecule as well as complex patterning technique such as μ-contact printing. The functionalization was first optimized on gold (Au) and silicon nitride (Si3N4)-patterned surfaces. The procedure consisted of the introduction of a passivating layer of hydrophobic silane molecules (propyltriethoxysilane [PTES]) followed by a treatment of the Au surface using 11-amino-1-undecanethiol hydrochloride (AT). On model substrates, well-ordered neural networks and an optimal coupling between a single neuron and single micrometric functionalized Au surface were achieved. In addition, we presented the preliminary results of this functionalization method directly applied on a CMOS-MEA: the electrical spontaneous spiking and bursting activities of the network recorded for up to 4 weeks demonstrate an excellent and stable neural adhesion and functional behavior comparable with what expected using a standard adhesion factor, such as polylysine or laminin, thus demonstrating that this procedure can be considered a good starting point to develop alternatives to the traditional chip coatings to provide selective and specific neuron-substrate adhesion.

Manipulating and Monitoring On-Surface Biological Reactions by Light-Triggered Local pH Alterations

Significant research efforts have been dedicated to the integration of biological species with electronic elements to yield smart bioelectronic devices. The integration of DNA, proteins, and whole living cells and tissues with electronic devices has been developed into numerous intriguing applications. In particular, the quantitative detection of biological species and monitoring of biological processes are both critical to numerous areas of medical and life sciences. Nevertheless, most current approaches merely focus on the "monitoring" of chemical processes taking place on the sensing surfaces, and little efforts have been invested in the conception of sensitive devices that can simultaneously "control" and "monitor" chemical and biological reactions by the application of on-surface reversible stimuli. Here, we demonstrate the light-controlled fine modulation of surface pH by the use of photoactive molecularly modified nanomaterials. Through the use of nanowire-based FET devices, we showed the capability of modulating the on-surface pH, by intensity-controlled light stimulus. This allowed us simultaneously and locally to control and monitor pH-sensitive biological reactions on the nanodevices surfaces, such as the local activation and inhibition of proteolytic enzymatic processes, as well as dissociation of antigen-antibody binding interactions. The demonstrated capability of locally modulating the on-surface effective pH, by a light stimuli, may be further applied in the local control of on-surface DNA hybridization/dehybridization processes, activation or inhibition of living cells processes, local switching of cellular function, local photoactivation of neuronal networks with single cell resolution and so forth.

Composite S-layer lipid structures

Designing and utilization of biomimetic membrane systems generated by bottom-up processes is a rapidly growing scientific and engineering field. Elucidation of the supramolecular construction principle of archaeal cell envelopes composed of S-layer stabilized lipid membranes led to new strategies for generating highly stable functional lipid membranes at meso- and macroscopic scale. In this review, we provide a state of the art survey how S-layer proteins, lipids, and polysaccharides may be used as basic building blocks for the assembly of S-layer supported lipid membranes. These biomimetic membrane systems are distinguished by a nanopatterned fluidity, enhanced stability and longevity and thus, provide a dedicated reconstitution matrix for membrane-active peptides and transmembrane proteins. Exciting areas for application of composite S-layer membrane systems concern sensor systems involving specific membrane functions.

Orientation and confinement of cells on chemically patterned polystyrene surfaces

UV/ozone oxidation was combined with a photomasking technique to produce adjacent regions of different chemistry on polystyrene (PS) surfaces. The surface chemistry and topography were studied using AFM, XPS and contact angle measurements. The physicochemical patterns were visualised by the condensation of water vapour upon the surfaces and by the differential attachment of Chinese hamster ovarian (CHO) cells. The orientation of CHO cells on 55 and 125 microm wide oxidised PS strips were measured and found to be highly dependent on the width of the oxidised feature. CHO cells in relatively close proximity to a linear polar/non-polar border showed significant axial alignment along the border. CHO cells can also be confined to specific regions of the polymer surface. Cells attached to larger areas (75 microm x 75 microm) were found to have a smaller average cell size than cells attached to the smaller (56 microm x 56 microm) areas.

Cellular attachment and spatial control of cells using micro-patterned ultra-violet/ozone treatment in serum enriched media

Ultra-violet Ozone (UVO) modified polystyrene (PS) surfaces were analyzed by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle (CA), optical microscopy (OM) and cell culture experiments. UV/Ozone treatment up to 900 s was used to increase the surface oxygen concentration of PS surfaces from 0% to approximately 35% (unwashed) and 0% to approximately 27% (washed). The observed differences in oxygen concentration, between washed and unwashed surfaces, have been previously attributed to the removal of low molecular weight debris produced in this treatment process. Surface roughness (Rq) is known to affect cellular attachment and proliferation. AFM studies of the UV/Ozone treated PS surfaces show the surface roughness is an order of magnitude less than that expected to cause an effect. UV/Ozone treatment of PS showed a marked change in CA which decreased to approximately 60 degrees after 900 s treatment. The increased attachment and proliferation of Chinese hamster ovarian (CHO) and mouse embryo 3T3-L1 (3T3) cells on the treated surfaces compared to untreated PS were found to correlate strongly with the increase in surface oxygen concentration. Surface chemical oxidation patterns on the PS were produced using a simple masking technique and a short UV/Ozone treatment time, typically 20-45 s. The chemical patterns on PS were visualized by water condensation and the spatially selective attachment of CHO and 3T3-L1 cells cultured with 10% (v/v) serum. This paper describes an easily reproducible, one step technique to produce a well-defined, chemically heterogeneous surface with a cellular resolution using UV/Ozone modification. By using a variety of cell types, that require different media conditions, we have been able to expand the potential applications of this procedure.

Cholesterol biosensors prepared by layer-by-layer technique

The analysis of formation, deposition and characterization of cholesterol oxidase (COX) layer-by-layer films were performed. Initially, a layer of polyanion, poly(styrene sulfonate) (PSS) was adsorbed followed by a layer of polycation, poly(ethylene imine) (PEI) on each solid substrate from aqueous solutions. The alternating layers were formed by consecutive adsorption of polycations (PEI) and negatively charged proteins (COX) and cholesterol esterase (CE). A strong interaction between protein and polyelectrolyte improves the stability of the alternating multilayer; however, it can change a native protein conformation and impair the protein activity. The PSS/PEI/COX, PSS/PEI/COX/PEI/CE, PSS/PEI/COX-CE/PEI etc. layered structures were prepared on the surface of a platinum electrode, ITO coated glass plate, quartz crystal microbalance, quartz plates, mica and silicon substrates. Optical and gravimetric measurements based on an ultraviolet-visible absorption spectroscopy and a quartz crystal microbalance revealed that the enzyme multilayers thus prepared consist of molecular layered of the proteins. The surface morphology of such bilayer films was investigated by using atomic force microscopy. The electrochemical redox processes of the enzyme-layered films deposited either on platinum or ITO coated glass plate were investigated. The response current of cholesterol oxidase electrode with concentration of cholesterol was investigated at length.

Studies on Mixed Monolayers and Langmuir-Blodgett Films of Schiff-Base Complex Cu(SBC(18))(2) and Calix

Mixed monolayers of Schiff-base complex Cu(SBC(18))(2) with an octadecyl hydrocarbon chain and Calix[4]arene without a long alkyl chain at an air/water interface were studied in ultrapure water at different temperatures. Interface behavior and thermodynamic estimation of the mixed monolayer indicate that a strong intermolecular interaction exists between the mixed components (Cu(SBC(18))(2) and calix[4]arene) and the two-dimensional miscibility decreases with the molar fraction of Cu(SBC(18))(2). It is noticeable that the calix[4]arene monolayer can be transferred successfully onto solid substrates due to the introduction of Cu(SBC(18))(2). FTIR transmission and UV-Vis absorption spectra of mixed LB films provide further evidence of molecular interaction between the headgroups. Copyright 2001 Academic Press.

Fabrication of nanometer-sized protein patterns using atomic force microscopy and selective immobilization

A new methodology is introduced to produce nanometer-sized protein patterns. The approach includes two main steps, nanopatterning of self-assembled monolayers using atomic force microscopy (AFM)-based nanolithography and subsequent selective immobilization of proteins on the patterned monolayers. The resulting templates and protein patterns are characterized in situ using AFM. Compared with conventional protein fabrication methods, this approach is able to produce smaller patterns with higher spatial precision. In addition, fabrication and characterization are completed in near physiological conditions. The adsorption configuration and bioreactivity of the proteins within the nanopatterns are also studied in situ.

Actin motion on microlithographically functionalized myosin surfaces and tracks

High-resolution e-beam patterning exposure of the surface of poly[(tert-butyl-methacrylate)-co-(methyl methacrylate)]-a common e-beam and deep-UV resist used in semiconductor microlithography-induced sharp changes in the surface hydrophobicity. These differences in hydrophobicity resulted in the selective attachment of heavy meromyosin to hydrophobic, unexposed surfaces. The movement of the actin filaments on myosin-rich and myosin-poor surfaces was statistically characterized in terms of velocity, acceleration, and angle of movement. The actin filaments have a smooth motion on myosin-rich surfaces and an uneven motion on myosin-poor surfaces. Interestingly, an excess of myosin sites has a slowing, albeit mild effect on the motion of the actin filaments. It was also found that the myosin-rich/myosin-poor boundary has an alignment-enforcement effect, especially for the filaments approaching the border from the myosin-rich side. Based on these results, we discuss the feasibility of building purposefully designed molecular motor arrays and the testing of the hypotheses regarding the functioning of the molecular motors.

Microbial sensor for new-generation cephalosporins based in a protein-engineered beta-lactamase

A protein-engineered beta-lactamase, constructed by site-directed mutagenesis in Escherichia coli (E104M/G238S), and having broadened specificity, was able to degrade cephalosporins of first, second, and third generations. Manipulations of culture conditions allowed an increase in beta-lactamase specific activity by up to twofold. The resultant bacteria were used to construct an immersable whole-cell biosensor for the detection of new-generation cephalosporins. Cells were immobilized on agar membranes, which in turn were attached to the surface of a flat pH electrode, thus constituting a biosensor based on the detection of pH changes. The sensor was able to detect second- and third-generation cephalosporins: cefamandole (0.4-4 mM), cefotaxime (0.4-3.5 mM), and cefoperazone (0.3-1.85 mM). Response times were between 3.5 and 11 min, depending on the kind of cephalosporin tested. The biosensor was stable for at least 7 d, time during which up to 100 tests were performed.

Langmuir-Blodgett films of photosensitive proteins

The striking properties of monolayers and multilayers of photosensitive proteins obtained by using the Langmuir-Blodgett technique are described. The close packing of the protein molecules, which preserve most of the properties found in solution, seems to be the main cause for their thermal stability, which in some cases reached a temperature of 200 degrees C without the loss of the protein secondary structure. The review is focused on three of the most intensively studied photosensitive proteins, namely photosynthetic reaction centres, bacteriorhodopsin and bovine rhodopsin, and on their possible applications as molecular optical devices.

Characterization of Langmuir-Blodgett films of rhodopsin: thermal stability studies

Two-dimensional close packing of purified bovine rhodopsin, made by the Langmuir-Blodgett technique, was characterized by small angle x-ray scattering and nanogravimetric measurements. The area occupied by a molecule of rhodopsin in the film was approximately 1100 Angstrum2 and the periodicity of the layers resulted in 59 Angstrum. The circular dichroism measurements showed that bleached rhodopsin in Langmuir-Blodgett film had high thermal stability, in fact, reaching a temperature of 150 degrees C without a loss of the secondary structure. Moreover, when the film was made up in the dark, rhodopsin maintained its stability up to at least 200 degrees C and its characteristic absorbance peak at 500 nm up to about 90 degrees C.