Fluid shear induced endothelial cell detachment from glass--influence of adhesion time and shear stress

Dynamic flow priming programs allow tuning up the cell layers properties for engineered vascular graft

Tissue engineered vascular grafts (TEVG) are potentially clear from ethical and epidemiological concerns sources for reconstructive surgery for small diameter blood vessels replacement. Here, we proposed a novel method to create three-layered TEVG on biocompatible glass fiber scaffolds starting from flat sheet state into tubular shape and to train the resulting tissue by our developed bioreactor system. Constructed tubular tissues were matured and trained under 3 types of individual flow programs, and their mechanical and biological properties were analyzed. Training in the bioreactor significantly increased the tissue burst pressure resistance (up to 18 kPa) comparing to untrained tissue. Fluorescent imaging and histological examination of trained vascular tissue revealed that each cell layer has its own individual response to training flow rates. Histological analysis suggested reverse relationship between tissue thickness and shear stress, and the thickness variation profiles were individual between all three types of cell layers. Concluding: a three-layered tissue structure similar to physiological can be assembled by seeding different cell types in succession; the following training of the formed tissue with increasing flow in a bioreactor is effective for promoting cell survival, improving pressure resistance, and cell layer formation of desired properties.

Nano Meets Micro-Translational Nanotechnology in Medicine: Nano-Based Applications for Early Tumor Detection and Therapy

Nanomaterials have great potential for the prevention and treatment of cancer. Circulating tumor cells (CTCs) are cancer cells of solid tumor origin entering the peripheral blood after detachment from a primary tumor. The occurrence and circulation of CTCs are accepted as a prerequisite for the formation of metastases, which is the major cause of cancer-associated deaths. Due to their clinical significance CTCs are intensively discussed to be used as liquid biopsy for early diagnosis and prognosis of cancer. However, there are substantial challenges for the clinical use of CTCs based on their extreme rarity and heterogeneous biology. Therefore, methods for effective isolation and detection of CTCs are urgently needed. With the rapid development of nanotechnology and its wide applications in the biomedical field, researchers have designed various nano-sized systems with the capability of CTCs detection, isolation, and CTCs-targeted cancer therapy. In the present review, we summarize the underlying mechanisms of CTC-associated tumor metastasis, and give detailed information about the unique properties of CTCs that can be harnessed for their effective analytical detection and enrichment. Furthermore, we want to give an overview of representative nano-systems for CTC isolation, and highlight recent achievements in microfluidics and lab-on-a-chip technologies. We also emphasize the recent advances in nano-based CTCs-targeted cancer therapy. We conclude by critically discussing recent CTC-based nano-systems with high therapeutic and diagnostic potential as well as their biocompatibility as a practical example of applied nanotechnology.

A practical review on the measurement tools for cellular adhesion force

Cell-cell and cell-matrix adhesions are fundamental in all multicellular organisms. They play a key role in cellular growth, differentiation, pattern formation and migration. Cell-cell adhesion is substantial in the immune response, pathogen-host interactions, and tumor development. The success of tissue engineering and stem cell implantations strongly depends on the fine control of live cell adhesion on the surface of natural or biomimetic scaffolds. Therefore, the quantitative and precise measurement of the adhesion strength of living cells is critical, not only in basic research but in modern technologies, too. Several techniques have been developed or are under development to quantify cell adhesion. All of them have their pros and cons, which has to be carefully considered before the experiments and interpretation of the recorded data. Current review provides a guide to choose the appropriate technique to answer a specific biological question or to complete a biomedical test by measuring cell adhesion.

Human dental pulp stem cell adhesion and detachment in polycaprolactone electrospun scaffolds under direct perfusion

Cell adhesion in three-dimensional scaffolds plays a key role in tissue development. However, stem cell behavior in electrospun scaffolds under perfusion is not fully understood. Thus, an investigation was made on the effect of flow rate and shear stress, adhesion time, and seeding density under direct perfusion in polycaprolactone electrospun scaffolds on human dental pulp stem cell detachment. Polycaprolactone scaffolds were electrospun using a solvent mixture of chloroform and methanol. The viable cell number was determined at each tested condition. Cell morphology was analyzed by confocal microscopy after various incubation times for static cell adhesion with a high seeding density. Scanning electron microscopy images were obtained before and after perfusion for the highest flow rate tested. The wall pore shear stress was calculated for all tested flow rates (0.005–3 mL/min). An inversely proportional relationship between adhesion time with cell detachment under perfusion was observed. Lower flow rates and lower seeding densities reduced the drag of cells by shear stress. However, there was an operational limit for the lowest flow rate that can be used without compromising cell viability, indicating that a flow rate of 0.05 mL/min might be more suitable for the tested cell culture in electrospun scaffolds under direct perfusion.

Buoyancy-activated cell sorting using targeted biotinylated albumin microbubbles

Cell analysis often requires the isolation of certain cell types. Various isolation methods have been applied to cell sorting, including florescence-activated cell sorting and magnetic-activated cell sorting. However, these conventional approaches involve exerting mechanical forces on the cells, thus risking cell damage. In this study we applied a novel isolation method called buoyancy-activated cell sorting, which involves using biotinylated albumin microbubbles (biotin-MBs) conjugated with antibodies (i.e., targeted biotin-MBs). Albumin MBs are widely used as contrast agents in ultrasound imaging due to their good biocompatibility and stability. For conjugating antibodies, biotin is conjugated onto the albumin MB shell via covalent bonds and the biotinylated antibodies are conjugated using an avidin-biotin system. The albumin microbubbles had a mean diameter of 2μm with a polydispersity index of 0.16. For cell separation, the MDA-MB-231 cells are incubated with the targeted biotin-MBs conjugated with anti-CD44 for 10 min, centrifuged at 10g for 1 min, and then allowed 1 hour at 4°C for separation. The results indicate that targeted biotin-MBs conjugated with anti-CD44 antibodies can be used to separate MDA-MB-231 breast cancer cells; more than 90% of the cells were collected in the MB layer when the ratio of the MBs to cells was higher than 70:1. Furthermore, we found that the separating efficiency was higher for targeted biotin-MBs than for targeted avidin-incorporated albumin MBs (avidin-MBs), which is the most common way to make targeted albumin MBs. We also demonstrated that the recovery rate of targeted biotin-MBs was up to 88% and the sorting purity was higher than 84% for a a heterogenous cell population containing MDA-MB-231 cells (CD44⁺) and MDA-MB-453 cells (CD44^–), which are classified as basal-like breast cancer cells and luminal breast cancer cells, respectively. Knowing that the CD44⁺ is a commonly used cancer-stem-cell biomarker, our targeted biotin-MBs could be a potent tool to sort cancer stem cells from dissected tumor tissue for use in preclinical experiments and clinical trials.

Time-dependent adhesive interaction of osteoblastic cells with polished titanium alloyed implant surfaces

AIM

Design optimization and surface modifications of orthopedic implants are focused on adhesive properties depending on specific applications. To obtain an in-vitro understanding of the adhesion interaction of bone cells on implant surfaces the time-dependent adhesion behavior of osteoblastic cells was studied.

MATERIALS AND METHODS

MG-63 osteoblastic cells were seeded on discs of polished titanium alloy (Ti6Al4V) and allowed to adhere for various time periods (1 to 48 h). Using a spinning disc device and a confocal laser scanning microscope (LSM) the shear stress required to detach the bone cells from the substrate was determined. An approximation of the adhesion force was calculated from measurements of cell height and contact radius.

RESULTS

Shear stress ranged from 40.4 N/m2 to 82.4 N/m2 showing an increase in cell adhesion reaching a maximum after 6 h before decreasing significantly. Using the cell height and contact radii, measured for the various time periods, the lowest adhesion force of 232 nN was approximated after 1 h cell adhesion and analogous to the adhesion strength measurements, the highest of 664 nN after 6 h. Generally, cell adhesion decreased at incubation times longer than 6 h before an increase after 48 h was observed once again.

CONCLUSIONS

Differences in adhesion behavior over time indicate dynamic cell-substrate interactions because of cell migration and proliferation processes. The study stresses the importance of calculating the adhesion force rather than shear stress to gain more expressive data regarding cell adhesion.

A Multiphysics Modeling Approach to Develop Right Ventricle Pulmonary Valve Replacement Surgical Procedures with a Contracting Band to Improve Ventricle Ejection Fraction

Patients with repaired tetralogy of Fallot account for the majority of cases with late onset right ventricle (RV) failure. A new surgical procedure placing an elastic band in the right ventricle is proposed to improve RV function measured by ejection fraction. A multiphysics modeling approach is developed to combine cardiac magnetic resonance imaging, modeling, tissue engineering and mechanical testing to demonstrate feasibility of the new surgical procedure. Our modeling results indicated that the new surgical procedure has the potential to improve right ventricle ejection fraction by 2-7% which compared favorably with recently published drug trials to treat LV heart failure.

Effect of pulse frequency on the osteogenic differentiation of mesenchymal stem cells in a pulsatile perfusion bioreactor

Perfusion bioreactors are a promising in vitro strategy to engineer bone tissue because they supply needed oxygen and nutrients and apply an osteoinductive mechanical stimulus to osteoblasts within large porous three-dimensional scaffolds. Model two-dimensional studies have shown that dynamic flow conditions (e.g., pulsatile oscillatory waveforms) elicit an enhanced mechanotransductive response and elevated expression of osteoblastic proteins relative to steady flow. However, dynamic perfusion of three-dimensional scaffolds has been primarily examined in short term cultures to probe for early markers of mechanotransduction. Therefore, the objective of this study was to investigate the effect of extended dynamic perfusion culture on osteoblastic differentiation of primary mesenchymal stem cells (MSCs). To accomplish this, rat bone marrow-derived MSCs were seeded into porous foam scaffolds and cultured for 15 days in osteogenic medium under pulsatile regimens of 0.083, 0.050, and 0.017 Hz. Concurrently, MSCs seeded in scaffolds were also maintained under static conditions or cultured under steady perfusion. Analysis of the cells after 15 days of culture indicated that alkaline phosphatase (ALP) activity, mRNA expression of osteopontin (OPN), and accumulation of OPN and prostaglandin E(2) were enhanced for all four perfusion conditions relative to static culture. ALP activity, OPN and OC mRNA, and OPN protein accumulation were slightly higher for the intermediate frequency (0.05 Hz) as compared with the other flow conditions, but the differences were not statistically significant. Nevertheless, these results demonstrate that dynamic perfusion of MSCs may be a useful strategy for stimulating osteoblastic differentiation in vitro.

Influence of flow rate and scaffold pore size on cell behavior during mechanical stimulation in a flow perfusion bioreactor

Mechanically stimulating cell-seeded scaffolds by flow-perfusion is one approach utilized for developing clinically applicable bone graft substitutes. A key challenge is determining the magnitude of stimuli to apply that enhances cell differentiation but minimizes cell detachment from the scaffold. In this study, we employed a combined computational modeling and experimental approach to examine how the scaffold mean pore size influences cell attachment morphology and subsequently impacts upon cell deformation and detachment when subjected to fluid-flow. Cell detachment from osteoblast-seeded collagen-GAG scaffolds was evaluated experimentally across a range of scaffold pore sizes subjected to different flow rates and exposure times in a perfusion bioreactor. Cell detachment was found to be proportional to flow rate and inversely proportional to pore size. Using this data, a theoretical model was derived that accurately predicted cell detachment as a function of mean shear stress, mean pore size, and time. Computational modeling of cell deformation in response to fluid flow showed the percentage of cells exceeding a critical threshold of deformation correlated with cell detachment experimentally and the majority of these cells were of a bridging morphology (cells stretched across pores). These findings will help researchers optimize the mean pore size of scaffolds and perfusion bioreactor operating conditions to manage cell detachment when mechanically simulating cells via flow perfusion.

A biological breadboard platform for cell adhesion and detachment studies

The dynamic nature of cell adhesion and detachment, which plays a critical role in a variety of physiological and pathological phenomena, still remains unclear. This motivates the pursuit of controllable manipulation of cell adhesion and detachment for a better understanding of cellular dynamics. Here we present an addressable, multifunctional, and reusable platform, termed the biological breadboard (BBB), for spatiotemporal manipulation of cell adhesion and detachment at cellular and subcellular levels. The BBB, composed of multiple gold electrodes patterned on a Pyrex substrate, is surface-modified with arginine-glycine-aspartic acid terminated thiol (RTT) and polyethylene glycol (PEG) to achieve a cell-adhesive surface on the gold electrodes and a cell-resistive surface on the Pyrex substrate, respectively. Cell adhesion is regulated by the steric repulsion of PEG chains, while cell detachment is controlled by the reductive desorption of a gold-thiol self-assembled monolayer (SAM) at an activation potential of -0.90 to -1.65 V. Experimental characterizations using NIH 3T3 fibroblasts are presented to demonstrate the utility of our device.

Tension, free space, and cell damage in a microfluidic wound healing assay

We use a novel, microfluidics-based technique to deconstruct the classical wound healing scratch assay, decoupling the contribution of free space and cell damage on the migratory dynamics of an epithelial sheet. This method utilizes multiple laminar flows to selectively cleave cells enzymatically, and allows us to present a 'damage free' denudation. We therefore isolate the influence of free space on the onset of sheet migration. First, we observe denudation directly to measure the retraction in the cell sheet that occurs after cell-cell contact is broken, providing direct and quantitative evidence of strong tension within the sheet. We further probe the mechanical integrity of the sheet without denudation, instead using laminar flows to selectively inactivate actomyosin contractility. In both cases, retraction is observed over many cell diameters. We then extend this method and complement the enzymatic denudation with analogies to wounding, including gradients in signals associated with cell damage, such as reactive oxygen species, suspected to play a role in the induction of movement after wounding. These chemical factors are evaluated in combination with the enzymatic cleavage of cells, and are assessed for their influence on the collective migration of a non-abrasively denuded epithelial sheet. We conclude that free space alone is sufficient to induce movement, but this movement is predominantly limited to the leading edge, leaving cells further from the edge less able to move towards the wound. Surprisingly, when coupled with a gradient in ROS to simulate the chemical effects of abrasion however, motility was not restored, but further inhibited.

Influence of shear stress in perfusion bioreactor cultures for the development of three-dimensional bone tissue constructs: a review

Bone tissue engineering aims to generate clinically applicable bone graft substitutes in an effort to ease the demands and reduce the potential risks associated with traditional autograft and allograft bone replacement procedures. Biomechanical stimuli play an important role under physiologically relevant conditions in the normal formation, development, and homeostasis of bone tissue--predominantly, strain (predicted levels in vivo for humans <2000 με) caused by physical deformation, and fluid shear stress (0.8-3 Pa), generated by interstitial fluid movement through lacunae caused by compression and tension under loading. Therefore, in vitro bone tissue cultivation strategies seek to incorporate biochemical stimuli in an effort to create more physiologically relevant constructs for grafting. This review is focused on collating information pertaining to the relationship between fluid shear stress, cellular deformation, and osteogenic differentiation, providing further insight into the optimal culture conditions for the creation of bone tissue substitutes.

The enhanced characteristics of osteoblast adhesion to photofunctionalized nanoscale TiO2 layers on biomaterials surfaces

Recently, UV photofunctionalization of titanium has been shown to be effective in enhancing osteogenic environment around this functional surface, in particular for the use of endosseous implants. However, the underlying mechanism remains unknown and its potential application to other tissue engineering materials has never been explored. We determined whether adhesion of a single osteoblast is enhanced on UV-treated nano-thin TiO(2) layer with virtually no surface roughness or topographical features. Rat bone marrow-derived osteoblasts were cultured on UV-treated or untreated 200-nm thick TiO(2) sputter-coated glass plates. After an incubation of 3 h, the mean critical shear force required to initiate detachment of a single osteoblast was determined to be 1280 +/- 430 nN on UV-treated TiO(2) surfaces, which was 2.5-fold greater than the force required on untreated TiO(2) surfaces. The total energy required to complete the detachment was 37.0 +/- 23.2 pJ on UV-treated surfaces, 3.5-fold greater than that required on untreated surfaces. Such substantial increases in single cell adhesion were also observed for osteoblasts cultured for 24 h. Osteoblasts on UV-treated TiO(2) surfaces were larger and characterized with increased levels of vinculin expression and focal contact formation. However, the density of vinculin or focal contact was not influenced by UV treatment. In contrast, both total expression and density of actin fibers increased on UV-treated surfaces. Thin layer TiO(2) coating and UV treatment of Co-Cr alloy and PTFE membrane synergistically resulted in a significant increase in the ability of cell attachment and osteoblastic production of alkaline phosphatase. These results indicated that the adhesive nature of a single osteoblast is substantially enhanced on UV-treated TiO(2) surfaces, providing the first evidence showing that each individual cell attached to these surfaces is substantially more resistant to exogenous load potentially from blood and fluid flow and mechanical force in the initial stage of in vivo biological environment. This enhanced osteoblast adhesion was supported synergistically but disproportionately by enhancement in focal adhesion and cytoskeletal developments. Also, this study demonstrated that UV treatment is effective on nano-thin TiO(2) depositioned onto non-Ti materials to enhance their bioactivity, providing a basis for TiO(2)-mediated photofunctionalization of biomaterials, a new method of developing functional biomaterials.

Measurement of the tensile strength of cell-biomaterial interface using the laser spallation technique

A previously developed laser spallation technique to determine the tensile strength of thin film interfaces was successfully adopted to determine the tensile strength of interfaces between three different live mammalian cells (osteoblast, chondrocyte and fibroblast) and polystyrene (untreated and fibronectin coated) and titanium surfaces. No noticeable differences in the interfacial tensile strength values were found across the three cell types on the same substrate although osteoblasts showed slightly lower adhesion strength when cultured on untreated polystyrene surfaces. Significant differences were, however, measured for cells treated on different surfaces. Use of fibronectin increased the interfacial tensile strength for all cell types, and cells bonded much better to titanium than to untreated polystyrene surfaces. Cell interfacial strength was higher when cultured with serum than in a serum-free environment. The results demonstrate the remarkable sensitivity of the laser spallation experiment in determining the effects of local interfacial microstructure and chemistry on cell adhesion.

Evaluation of laser spallation as a technique for measurement of cell adhesion strength

Cell adhesion to material surfaces is one of the fundamental phenomena of cellular response to implanted devices. Controlling the strength, dynamics, and mechanics of cell adhesion offer opportunities for designing novel biomaterials for tissue engineering and biotechnology. Many techniques have been developed for the purpose of quantifying various types of cell-biomaterial interaction. One method to evaluate cell affinity for a biomaterial is to measure the stress required to remove adherent cells from the material. This study investigates the possibility of using laser spallation, a technique previously developed for measuring the tensile strength of thin film interfaces, for evaluation of initial cell attachment strength. MC3T3-E1 preosteoblasts were cultured on fibronectin-coated polystyrene, a surface known to engage cells in receptor mediated adhesion, and untreated polystyrene, which elicit nonspecific adhesion mechanisms during early stages of cell attachment. The laser spallation technique effectively detached cells from polymer substrates and also distinguished relative cell adhesion strengths to surfaces with known differences in cell binding affinities. Scanning electron micrographs determined that cell detachment resulting from laser spallation left a cleaner surface than jet impingement, possibly suggesting a more complete detachment mechanism. Absolute values of adhesion strengths determined by laser spallation were significantly higher than those found using jet impingement, a previously reported hydrodynamic technique.

Fluid mechanics of the human eye: aqueous humour flow in the anterior chamber

We consider and compare the various different kinds of flow that may take place in the anterior chamber of a human eye. The physical mechanisms responsible for causing such flows may be classified as follows: (i) buoyancy-driven flow arising from the temperature difference between the anterior surface of the cornea and the iris, (ii) flow generated by the aqueous production of the ciliary body, (iii) flow generated by the interaction between buoyancy and gravity while sleeping while sleeping in a face-up position, (iv) flow generated by phakodenesis (lens tremor), (v) flow generated by Rapid Eye Movement (REM) during sleep. Each flow is studied using a traditional fluid mechanics/asymptotic analysis approach. We also assess the veracity of a hypothesis that was recently advanced [see Maurice, D.M., 1998. The Von Sallman Lecture 1996: An ophthalmological explanation of REM sleep. Exp. Eye. Res. 66, 139-145, for details] to suggest that, contrary to previous opinion, the purpose of REM during sleep is to ensure corneal respiration in the absence of the buoyant mixing that routinely takes place due to (i) above during waking conditions.

Nanoscale intracellular organization and functional architecture mediating cellular behavior

Cells function based on a complex set of interactions that control pathways resulting in ultimate cell fates including proliferation, differentiation, and apoptosis. The inter-workings of this immensely dense network of intracellular molecules are influenced by more than random protein and nucleic acid distribution where their interactions culminate in distinct cellular function. By probing the design of these biological systems from an engineering perspective, researchers can gain great insight that will aid in building and utilizing systems that are on this size scale where traditional large-scale rules may fail to apply. The organized interaction and gradient distribution in intracellular space imply a structural architecture that modulates cellular processes by influencing biochemical interactions including transport and binding-reactions. One significant structure that plays a role in this modulation is the cell cytoskeleton. Here, we discuss the cytoskeleton as a central and integrating functional structure in influencing cell processes and we describe technology useful for probing this structure. We explain the nanometer scale science of cytoskeletal structure with respect to intracellular organization, mechanotransduction, cytoskeletal-associated proteins, and motor molecules, as well as nano- and microtechnologies that are applicable for experimental studies of the cytoskeleton. This biological architecture of the cytoskeleton influences molecular, cellular, and physiological processes through structured multimodular and hierarchical principles centered on these functional filaments. Through investigating these organic systems that have evolved over billions of years, understanding in biology, engineering, and nanometer-scaled science will be advanced.

Mechanotransduction in endothelial cell migration

The migration of endothelial cells (ECs) plays an important role in vascular remodeling and regeneration. EC migration can be regulated by different mechanisms such as chemotaxis, haptotaxis, and mechanotaxis. This review will focus on fluid shear stress-induced mechanotransduction during EC migration. EC migration and mechanotransduction can be modulated by cytoskeleton, cell surface receptors such as integrins and proteoglycans, the chemical and physical properties of extracellular matrix (ECM) and cell-cell adhesions. The shear stress applied on the luminal surface of ECs can be sensed by cell membrane and associated receptor and transmitted throughout the cell to cell-ECM adhesions and cell-cell adhesions. As a result, shear stress induces directional migration of ECs by promoting lamellipodial protrusion and the formation of focal adhesions (FAs) at the front in the flow direction and the disassembly of FAs at the rear. Persistent EC migration in the flow direction can be driven by polarized activation of signaling molecules and the positive feedback loops constituted by Rho GTPases, cytoskeleton, and FAs at the leading edge. Furthermore, shear stress-induced EC migration can overcome the haptotaxis of ECs. Given the hemodynamic environment of the vascular system, mechanotransduction during EC migration has a significant impact on vascular development, angiogenesis, and vascular wound healing.

Role of cell surface heparan sulfate proteoglycans in endothelial cell migration and mechanotransduction

Endothelial cell (EC) migration is critical in wound healing and angiogenesis. Fluid shear stress due to blood flow plays an important role in EC migration. However, the role of EC surface heparan sulfate proteoglycans (HSPGs) in EC adhesion, migration, and mechanotransduction is not well understood. Here, we investigated the effects of HSPG disruption on the adhesion, migration, and mechanotransduction of ECs cultured on fibronectin. We showed that disruption of HSPGs with heparinase decreased EC adhesion rate by 40% and adhesion strength by 33%. At the molecular level, HSPG disruption decreased stress fibers and the size of focal adhesions (FAs), increased filopodia formation, and enhanced EC migration. Under flow condition, heparinase treatment increased EC migration speed, but inhibited shear stress-induced directionality of EC migration and the recruitment of phosphorylated focal adhesion kinase in the flow direction, suggesting that HSPGs are important for sensing the direction of shear stress. In addition, decreasing cell adhesion by lowering fibronectin density enhanced EC migration under static and flow condition, but did not affect the directional migration of ECs under flow. Based on our results, we propose that HSPGs play dual roles as mechanotransducer on the EC surface: (1) HSPGs-matrix interaction on the abluminal surface regulates EC migration speed through an adhesion-dependent manner, and (2) HSPGs without binding to matrix (e.g., on the luminal surface) are involved in sensing the direction of flow through an adhesion-independent manner.

Biologically active fragment of a human tRNA synthetase inhibits fluid shear stress-activated responses of endothelial cells

Human tryptophanyl-tRNA synthetase (TrpRS) is active in translation and angiogenesis. In particular, an N-terminally truncated fragment, T2-TrpRS, that is closely related to a natural splice variant is a potent antagonist of vascular endothelial growth factor-induced angiogenesis in several in vivo models. In contrast, full-length native TrpRS is inactive in the same models. However, vascular endothelial growth factor stimulation is only one of many physiological and pathophysiological stimuli to which the vascular endothelium responds. To investigate more broadly the role of T2-TrpRS in vascular homeostasis and pathophysiology, the effect of T2-TrpRS on well characterized endothelial cell (EC) responses to flow-induced fluid shear stress was studied. T2-TrpRS inhibited activation by flow of protein kinase B (Akt), extracellular signal-regulated kinase 1/2, and EC NO synthase and prevented transcription of several shear stress-responsive genes. In addition, T2-TrpRS interfered with the unique ability of ECs to align in the direction of fluid flow. In all of these assays, native TrpRS was inactive, demonstrating that angiogenesis-related activity requires fragment production. These results demonstrate that T2-TrpRS can regulate extracellular signal-activated protein kinase, Akt, and EC NO synthase activation pathways that are associated with angiogenesis, cytoskeletal reorganization, and shear stress-responsive gene expression. Thus, this biological fragment of TrpRS may have a role in the maintenance of vascular homeostasis.

Shear-induced platelet activation and adhesion on human pulmonary artery endothelial cells seeded onto hydrophilic polymers

We evaluated platelet activation and adhesion on two plasma polymerized surfaces, N-vinyl pyrrolidone (NVP) and gamma-butyro lactone (GBL), which have been shown previously to promote endothelial cell growth and adhesion as well as fibronectin-coated glass (1 microg/cm(2)) coverslips. Human pulmonary artery endothelial cells were seeded onto coverslips at a low density ( approximately 20,000 cells/cm(2)) and grown to confluence (3-5 days). The materials, both with and without ECs, were then exposed to a shear rate of 400 s(-1) in a closed loop recirculating flow system containing human platelet-rich plasma. Plasma samples were taken at 0, 5, 15, 30, and 60 min and analyzed for platelet and coagulation activation. The coverslips were examined for EC coverage and platelet adherence. EC retention over a 1-h period was approximately 75% for all three materials. All three materials without ECs were highly platelet activating having similar P-selectin expression, platelet factor 4 (PF4) release, mepacrine uptake, and microparticle production. Both microparticle production and platelet adhesion were significantly lower in EC-seeded materials. Dense granule and PF4 release were both slightly diminished in all three materials seeded with ECs. P-selectin expression was reduced slightly for GBL, but remained the same for the other two materials. The EC-seeded materials displayed favorable characteristics with respect to platelet activation and adhesion; however, they still demonstrated some thrombogenic tendencies due to EC loss and exposure of the underlying substrate. Therefore, both EC coverage and EC hemostatic function are important factors in determining the thromboresistance of an EC-seeded surface.

Effect of contact time and inhibitor concentration on the affinity mediated adsorption of cells to surfaces

Cell detachment by shear stress under conditions of laminar flow was used to investigate the effect of incubation time and soluble binding competitors on affinity mediated cell/surface interactions. Fractional attachment between yeast and a Concanavalin A (Con A) coated surface was studied as a function of adhesion time prior to exposure to shear in a parallel plate flow chamber. Two, four and sixteen hours adhesion times gave rise to significantly different fractional attachment profiles, with four hours giving greater cell retention.The effect of dextran as a competitive displacer of pre-attached cells was also examined using a number of exposure regimes. While the presence of dextran in the displacement buffer led to higher fractional displacement of pre-attached cells, this effect was magnified if an equilibration period between dextran solution and pre-attached cells was allowed before detachment was attempted. The decline in fractional attachment increased with incubation time up to 30 min, with longer periods resulting in a smaller effect. Pre-incubation of the Con A surface with dextran prior to the introduction of cells led to a 60% reduction in attachment.Attempts to determine critical shear values were complicated by the presence of a tightly bound cell fraction of approximately 15% that was not removed at the highest shear values used.

Effect of seeding duration on the strength of chondrocyte adhesion to articular cartilage

Chondrocyte adhesion to cartilage may play an important role in the repair of articular defects by maintaining cells in positions where their biosynthetic products can contribute to the repair process. The objective of this in vitro study was to determine the effect of the duration of seeding time on the ability of chondrocytes to resist detachment from cartilage when subjected to mechanical perturbation (fluid-induced shear stress). Suspensions of adult bovine articular chondrocytes were prepared from primary, high-density monolayer cultures and infused into a parallel-plate shear-flow chamber where they settled onto 50-microm-thick sections of bovine articular cartilage at a density of approximately 20,000 cells/cm2. The chondrocytes were seeded and allowed to attach to the cartilage surface for specific durations (5-40 minutes) in medium including 10% serum at 22 degrees C, after which the cells were exposed to fluid flow-induced shear stresses (6-90 Pa). The fraction of detached cells at each shear stress was calculated from microscopic images. Shear stress was applied for 1 minute because this length of time was sufficient to induce steady-state cell detachment. Increasing the duration of cell seeding led to a more firm attachment of chondrocytes to cartilage. After 9 minutes of seeding, 50% cell detachment was induced by gravitational force alone. After 40 minutes of seeding, 50% detachment required 26 Pa of shear stress. Extrapolation of the data to account for the effect of repeated applications of cell suspensions to an individual cartilage substrate indicated that for a freshly prepared cartilage section, 50% detachment was induced by gravity after 25 minutes of seeding and by 2.3 Pa of shear stress after 40 minutes of seeding. The increase in resistance to shear stress-induced cell detachment with increasing seeding duration suggests that it may be beneficial to allow chondrocytes to stabilize in the absence of applied load for some time after chondrocyte transplantation for cartilage repair in vivo.

Resistance of freshly adherent endothelial cells to detachment by shear stress is matrix and time dependent

PURPOSE

The placement of endothelial cells on the surfaces of arteries immediately after vascular interventions has the potential to limit restenosis by inhibiting intimal thickening and by stimulating arterial enlargement. Because such re-endothelialization is dependent on rapid formation of strong endothelial cell-matrix interactions, experiments were performed to identify the extracellular matrix that provided endothelial cells with the greatest resistance to detachment by a shear stress in the least amount of time.

MATERIALS AND METHODS

Rabbit microvascular endothelial cells were plated onto glass slides coated with collagen, laminin, vitronectin, or fibronectin. After allowing 5-45 minutes for cell adhesion, each slide was placed in a parallel plate chamber, and the number of cells present before and after exposure of the cells to shear stresses (1-25 dynes/cm2) were counted.

RESULTS

Endothelial cell retention to the matrix-coated slides was time and matrix dependent. The percentages of endothelial cells retained after adhesion times of 5, 15, 30, and 45 minutes followed by exposure to 15 dynes/cm2 were 9%, 20%, 32%*, and 38%* for collagen; 7%, 20%, 36%*, and 49%* for laminin; 35%, 47%, 62%, and 76%* for vitronectin; and 64%, 58%, 71%, and 78% for fibronectin, respectively (*P < .05 versus 5 minutes adhesion). Similar results were obtained for lower and higher shear stresses, indicating that cell retention was independent of shear stress above 1 dyne/cm2.

CONCLUSIONS

The resistance of freshly adherent endothelial cells to detachment by shear stress is matrix- (fibronectin approximately equal to vitronectin > laminin approximately equal to COL) and time-dependent. Fibronectin provided the greatest cell retention in the least amount of time.

Human aortic endothelial cell migration onto stent surfaces under static and flow conditions

PURPOSE

The objective of the present study is to establish an in vitro model designed to quantitatively define human aortic endothelial cell (HAEC) migration onto stainless steel stent material under both static and flow conditions of high and low wall shear stress.

MATERIALS AND METHODS

To simulate implantation of a stent onto the intact arterial wall, HAECs were seeded and grown to confluence on thick, firm collagen gels. Flat 1 x 1-cm square, stainless steel pieces were implanted on this endothelialized surface and migration of HAECs onto the steel surface was monitored, measured, and compared under static and high (15 dynes/cm2) and low (2 dynes/cm2) wall shear stress flow conditions designed to model wall shear stress levels encountered at different sites within the human arterial system.

RESULTS

Under no flow, endothelial cell migration occurred uniformly from the periphery, attaining complete confluence over the square surface within 14 days. The initial migratory rate was approximately 10 micrograms/h +/- 0.5 days 1-3 and increased to a rate near 15 micrograms/h +/- 0.5 between days 10 and 14. High shear stress significantly (P < .002) increased HAEC migration rate to 25 micrograms/h +/- 0.8 in the direction of flow, resulting in an increase in total area endothelial coverage from 59% under no flow to 87% under high shear stress flow conditions when compared at 7 days.

CONCLUSIONS

These results indicate the rate and extent of endothelial migration onto a prosthetic material surface are influenced by the level of direction of flow-related wall shear stress. Furthermore, these results demonstrate an in vitro model that provides a method to quantitatively evaluate and possibly predict the relative ability of different prosthetic materials to endothelialize under variable in vivo flow conditions.