Progress in hydroformylation and carbonylation

Coupling CO2 Electroreduction to CO with alkyne Alkoxycarbonylation

The alkyne alkoxycarbonylation to α- or β-substituted acrylates was coupled with the electrocatalytic reduction of CO2 to CO. The CO-enriched gaseous mixture produced from the electrocatalytic reduction of CO2 was collected and directly used in the alkyne alkoxycarbonylation. The CO content was found to be critical to the process of carbonylation, and satisfying results were attained by using the gas mixture containing >15 vol % CO. This method offered an efficient but simple CO source from CO2 electroreduction to the alkoxycarbonylation reaction in two-compartment manner.

Elucidation of hemilabile-coordination-induced tunable regioselectivity in single-site Rh-catalyzed heterogeneous hydroformylation

Revealing key factors that modulate the regioselectivity in heterogeneous hydroformylation requires identifying and monitoring the dynamic evolution of the truly active center under real reaction conditions. However, unambiguous in situ characterizations are still lacking. Herein, we elaborately construct a series of Rh-POPs catalysts for propylene hydroformylation which exhibited tunable regioselectivity. Multi-technique approaches reveal the unique microenvironment of the diverse HRh(CO)(PPh3-frame)2 sites with distinct P-Rh-P bite angles ranging from 90° to 120° and 158° to 168°, respectively. In situ time-resolved XAFS, FT-IR, and quasi-in situ Solid-state NMR experiments combined with DFT calculations explain the dynamic evolution of the electronic and coordinate state of the distinct active sites induced by hemilabile PPh3-frame ligands and further disclose the regulatory mechanism of regioselectivity. These state-of-the-art techniques and multiscale analysis advance the understanding of how hemilabile coordination influences regioselectivity and will provide a new thought to modulate the regioselectivity in future industrial processes.

Organocatalyzed Carbonylation of Alkyl Halides Driven by Visible Light

Herein, we describe a new strategy for the carbonylation of alkyl halides with different nucleophiles to generate valuable carbonyl derivatives under visible light irradiation. This method is mild, robust, highly selective, and proceeds under metal-free conditions to prepare a range of structurally diverse esters and amides in good to excellent yields. In addition, we highlight the application of this activation strategy for 13C isotopic incorporation. We propose that the reaction proceeds by a photoinduced reduction to afford carbon-centered radicals from alkyl halides, which undergo subsequent single electron-oxidation to form a carbocationic intermediate. Carbon monoxide is trapped by the carbocation to generate an acylium cation, which can be attacked by a series of nucleophiles to give a range of carbonyl products.

Palladium-Catalyzed Carbonylation Reaction of Indole/Pyrrole Involving HCFO-1233zd (E)

3-Indole-3-one is a key intermediate in the synthesis of many drugs and plays an important role in synthetic chemistry and biochemistry. A new method for synthesizing trifluoromethylated 3-indoleketones by Pd(0)-catalyzed carbonylation was introduced. In the absence of additives, 1-chloro-3,3,3-trifluoropropyl (an inexpensive and environmentally friendly synthetic block of trifluoromethyl) reacts with indole and carbon monoxide to generate trifluoromethylindole ketones with good yields, regioselectivity, and chemical selectivity; furthermore, the products exhibit strong resistance to basic functional groups, such as alkynes, aldehydes, and esters. In addition to the conversion of indole compounds into corresponding products, pyrrole and heteroindole may be suitable for corresponding chemical transformations. This study provides a synthetic method for the further construction of trifluoromethylated 3-indole ketones.

Theoretical study on hydroformylation catalyzed by cationic cobalt(II) complexes

Hydroformylation is one of the most important homogeneous reactions in industrial production. Herein, a density functional theory (DFT) method was employed to investigate two proposed reaction mechanisms of hydroformylation catalyzed by cationic cobalt(II) complexes, the carbonyl dissociative mechanism and the associative mechanism. The calculated results showed that the heterolytic H2 activation is the rate-determining step for both the dissociative mechanism and the associative mechanism, with energy barriers of 26.8 kcal mol-1 and 40.5 kcal mol-1, respectively. Meanwhile, the regioselectivity, the spin multiplicity of the catalyst and the substituent effects on the reaction were also investigated. The most stable cobalt(II) catalyst has a doublet state and the linear aldehyde is the dominant product. In addition, it was found that the energy barrier of the reaction decreased when the electron density of the Co center of the catalyst was increased by changing the ligand. The catalytic activity of the catalyst was proposed to be the best when the PEt2 group of the ligand is replaced by the P(tBu)2 group. This study might not only provide new insights for hydroformylation catalyzed by cobalt but also facilitate theory-guided design of novel transition metal catalysts for hydroformylation.

Differentiating the Yield of Chemical Reactions Using Parameters in First-Order Kinetic Equations to Identify Elementary Steps That Control the Reactivity from Complicated Reaction Path Networks

The yield of a chemical reaction is obtained by solving its rate equation. This study introduces an approach for differentiating yields by utilizing the parameters of the rate equation, which is expressed as a first-order linear differential equation. The yield derivative for a specific pair of reactants and products is derived by mathematically expressing the rate constant matrix contraction method, which is a simple kinetic analysis method. The parameters of the rate equation are the Gibbs energies of the intermediates and transition states in the reaction path network used to formulate the rate equation. Thus, our approach for differentiating the yield allows a numerical evaluation of the contribution of energy variation to the yield for each intermediate and transition state in the reaction path network. In other words, a comparison of these values automatically extracts the factors affecting the yield from a complicated reaction path network consisting of numerous reaction paths and intermediates. This study verifies the behavior of the proposed approach through numerical experiments on the reaction path networks of a model system and the Rh-catalyzed hydroformylation reaction. Moreover, the possibility of using this approach for designing ligands in organometallic catalysts is discussed.

Ethylene Methoxycarbonylation over Heterogeneous Pt1/MoS2 Single-Atom Catalyst: Metal-Support Concerted Catalysis

Ethylene methoxycarbonylation (EMC) to methyl propanoate (MP) is an industrially important reaction and commercially uses a homogeneous Pd-phosphine organometallic complex as the catalyst and corrosive strong acid as the promoter. In this work, we develop a Pt1/MoS2 heterogeneous single-atom catalyst (SAC) which exhibits high activity, selectivity, and good recyclability for EMC reaction without need of any liquid acid. The production rate of MP achieves 0.35 gMP gcat-1 h-1 with MP selectivity of 91.1% at 1 MPa CO, 1 MPa C2H4, and 160 °C, which can be doubled at 2 MPa CO and corresponds to 320.1 molMP molPt-1 h-1, at least 1 order of magnitude higher than the earlier reported heterogeneous catalyst and even comparable to some of homogeneous catalyst. Advanced characterizations and DFT calculations reveal that all the Pt single atoms are located at the Mo vacancies along the Mo edge of the MoS2 nanosheets, forming pocket-like Mo-S-Pt1-S-Mo ensembles with uniform and well-defined structure. Methanol is first adsorbed and dissociated on Mo sites, and the produced H spillovers to the adjacent Pt site forming Pt-H species which then activate ethylene, forming Pt-ethyl species. Meanwhile, CO adsorbed on the other Mo site reacts with the Pt-ethyl species, yielding propionyl species, and this carbonylation is the rate-determining step. The final methoxylation step proceeds via the nucleophilic attack of propionyl species by -OCH3 affording the final product MP. Such a metal-support concerted catalysis enabled by the Mo-S-Pt1-S-Mo multisite ensemble opens a new avenue for SACs to promote the multimolecular reactions that prevail in homogeneous catalysis.

Low-temperature hydroformylation of ethylene by phosphorous stabilized Rh sites in a one-pot synthesized Rh-(O)-P-MFI zeolite

Zeolites containing Rh single sites stabilized by phosphorous were prepared through a one-pot synthesis method and are shown to have superior activity and selectivity for ethylene hydroformylation at low temperature (50 °C). Catalytic activity is ascribed to confined Rh2O3 clusters in the zeolite which evolve under reaction conditions into single Rh3+ sites. These Rh3+ sites are effectively stabilized in a Rh-(O)-P structure by using tetraethylphosphonium hydroxide as a template, which generates in situ phosphate species after H2 activation. In contrast to Rh2O3, confined Rh0 clusters appear less active in propanal production and ultimately transform into Rh(I)(CO)2 under similar reaction conditions. As a result, we show that it is possible to reduce the temperature of ethylene hydroformylation with a solid catalyst down to 50 °C, with good activity and high selectivity, by controlling the electronic and morphological properties of Rh species and the reaction conditions.

Enhancing stability via confining Rh-P species in ZIF-8 for hydroformylation of 1-octene

The stability of Rh-based heterogeneous catalysts is a key issue in the hydroformylation of olefins. Confinement of active Rh species has been considered an effective strategy to achieve stable catalysts. In this work, a phosphine ligand was successfully confined in ZIF-8 material and coordinated with Rh metal by a reduction procedure to develop an efficient and stable Rh-based catalyst for hydroformylation of 1-octene. The results indicate that the catalyst reduced at 300 °C under H2 atmosphere exhibits better stability than that with NaBH4 as reductant and undoped P catalyst. Various characterization studies demonstrate that the superior performance is due to the strong interaction between Rh metal and P, which inhibits the leaching of active Rh species. This work reveals an effective strategy for the synthesis of highly stable catalysts for use in the hydroformylation reaction.

Intermolecular Metal-Catalyzed C‒C Coupling of Unactivated Alcohols or Aldehydes for Convergent Ketone Construction beyond Premetalated Reagents

Intermolecular metal-catalyzed C‒C couplings of unactivated primary alcohols or aldehydes to form ketones are catalogued. Reactions are classified on the basis of pronucleophile. Protocols involving premetalated reagents or reactants that incorporate directing groups are not covered. These methods represent an emerging alternative to classical multi-step protocols for ketone construction that exploit premetalated reagents, and/or steps devoted to redox manipulations and carboxylic acid derivatization.

Heterogenized Phenanthroline-Pd(2+)-Catalyzed Alkoxycarbonylation of Aryl Iodides in Base-Free Conditions

A phenanthroline-based porous organic polymer-supported heterogeneous Pd catalyst (Pd@Phen-POP) is facilely synthesized by the solvent knitting of a Phen scaffold via the Lewis-acid-catalyzed Friedel-Crafts reaction using dichloromethane as a source for linker in the presence of AlCl₃. The catalyst very effectively catalyzes the alkoxycarbonylation of various substituted aryl iodides with various alcohols to give corresponding products in good to excellent yields. Owing to the heterotic nature of the catalyst, it can be easily separated by simple filtration from the reaction mixture and recycled.

Palladium(II)-Catalyzed Regioselective Hydrocarbofunctionalization of N-Alkenyl Amides: Synthesis of Tryptamine Derivatives

The hydrocarbofunctionalization of allyl amines connected to the picolinamide directing group is developed under Pd(II) catalysis. The strategy is grounded on a nucleopalladation concept, and a wide range of indoles effectively participated to produce valuable tryptamine derivatives in high yields. Synthetic utilities were showcased through the substrate diversification bearing bioactive core, Pictet-Spengler cyclization, and β-carboline synthesis. A mechanistic study suggested an irreversible nucleopalladation step, while protodepalladation follows a reversible pathway.

Highly Active Rh Catalysts with Strong π-Acceptor Phosphine-Containing Porous Organic Polymers for Alkene Hydroformylation

Phosphine-containing porous organic polymers (phosphine-POPs) are a kind of potential catalyst support for alkene hydroformylation. However, the synthesis of phosphine-POPs with strong π-acceptor is still a challenge. Herein, we report the synthesis of phosphine-POPs with different π-acceptor properties [POL-P(Pyr)₃, CPOL-BPa&PPh₃-15, and CPOL-BP&PPh₃-15] and evaluated their performances as ligands to coordinate with Rh(acac)(CO)₂ for hydroformylation of alkenes. We found that the Rh center with stronger π-acceptor phosphine-POPs showed better catalytic performance. Rh/CPOL-BPa&PPh₃-15 with strong π-acceptor bidentate phosphoramidites showed obviously higher activity and regioselectivity (TON = 7.5 × 10³, l/b = 26.1) than Rh/CPOL-BP&PPh₃-15 (TON = 5.3 × 10³, l/b = 5.0) with weaker π-acceptor bidentate phosphonites. Particularly, the TON of the hydroformylation reached 27.7 × 10³ upon using Rh/POL-P(Pyr)₃ which possessed tris(1-pyrrolyl)phosphane coordination sites. Overall, our study provides an orientation to design phosphine-POPs for hydroformylation reactions.

Alcohol Synthesis by Cobalt-Catalyzed Visible-Light-Driven Reductive Hydroformylation

A cobalt-catalyzed reductive hydroformylation of terminal and 1,1-disubstituted alkenes is described. One-carbon homologated alcohols were synthesized directly from CO and H₂, affording anti-Markovnikov products (34-87% yield) with exclusive regiocontrol (linear/branch >99:1) for minimally functionalized alkenes. Irradiation of the air-stable cobalt hydride, (dcype)Co(CO)₂H (dcype = dicyclohexylphosphinoethane) with blue light generated the active catalyst that mediates alkene hydroformylation and subsequent aldehyde hydrogenation. Mechanistic origins of absolute regiocontrol were investigated by in situ monitoring of the tandem catalytic reaction using multinuclear NMR spectroscopy with syngas mixtures.

Synthesis of organic carbamates as polyurethane raw materials from CO2: the quest for metal alkoxides as regenerable reagents

It is well known that the utilization of carbon dioxide (CO₂) for chemical materials is attracting research attention from the viewpoint of the carbon cycle. To contribute to the reduction of CO₂ emission through such CO₂ utilization reactions and counteract global climate change, the target compounds should be core chemical products that are distributed in large quantities and used for a long time. One such synthetic target is isocyanates that are used as raw materials for the production of polyurethanes, which are versatile polymeric materials with a service life of approximately 10 years. However, since direct synthesis of isocyanate from CO₂ is quite difficult due to equilibrium constraints, a method via the use of its alcohol adduct, organic carbamate, as a precursor has been proposed. In this Perspective, we present regenerative metal alkoxide reactants, such as tin alkoxide, titanium alkoxide, and alkoxysilane, as environmentally benign reactants for the synthesis of organic carbamates from CO₂. We also present a practical and environmentally friendly method for the highly efficient synthesis of various organic carbamates, including industrially important diisocyanate precursors, from 1 atm CO₂ using alkoxysilanes. Furthermore, prospects for the practical application of these carbamate synthesis reactions are also discussed.

Auto-tandem catalytic reductive hydroformylation with continuous multiphase catalyst recycling

This work covers auto-tandem catalytic hydroformylation and hydrogenation for the synthesis of alcohols for synthetic fuels from renewable olefin cuts. A multiphase catalyst recycling system was proven to be feasible in continuous flow.

Green Process Design for Reductive Hydroformylation of Renewable Olefin Cuts for Drop-In Diesel Fuels

CO2 -neutral fuels are a way to cleaner and more sustainable mobility. Utilization of bio-syngas via Fischer-Tropsch (FT) synthesis represents an interesting route for the production of tailormade biofuels. Recent developments in FT catalyst research led to olefin-enriched products, enabling the synthesis of alcohol-enriched fuels by reductive hydroformylation of the C=C bond. Several alcohols have already proven to be suitable fuel additives with favorable combustion behavior. Here, a hydroformylation-hydrogenation sequence of FT-olefin-paraffin mixtures was investigated as a potential route to alcohols. A liquid-liquid biphasic system with a rhodium/3,3',3''-phosphanetriyltris(benzenesulfonic acid) trisodium salt (TPPTS) catalyst system was chosen for effective catalyst recycling. After optimizing reaction conditions with a model substrate consisting of 1-octene and n-heptane the conversion of an actual olefin-containing C5 -C10  FT product fraction to alcohols in continuously operated processes for 37 h was achieved with a total turnover number of 23679.

Steric Influence on Reactions of Benzyl Potassium Species with CO

Reactions of benzyl potassium species with CO are shown to proceed via transient carbene-like intermediates that can undergo either dimerization or further CO propagation. In a sterically unhindered case, formal dimerization of the carbene is the dominant reaction pathway, as evidenced by the isolation of ((Ph3 SiO)(PhCH2 )C)2 2 and PhCH2 C(O)CH(OH)CH2 Ph 3. Reactions with increasingly sterically encumbered reagents show competitive reaction pathways involving intermolecular dimerization leading to species analogous to 2 and 3 and those containing newly-formed five-membered rings tBu2 C6 H2 (C(OSiR3 )C(OSiR3 )CH2 ) (R=Me 6, Ph 7). Even further encumbered reagents proceed to either dimerize or react with additional CO to give a ketene-like intermediates, thus affording a 7-membered tropolone derivative 14 or the dione (3,5-tBu2 C6 H3 )3 C6 H2 CH2 C(O))2 15.

Cobalt Carbonyls Stabilized by N,P-Ligands: Synthesis, Structure, and Catalytic Property for Ethylene Oxide Hydroalkoxycarbonylation

Reactions of N,P-Ligands as Ph₂ P(o-NMe₂ C₆ H₄ ) (¹ L), 2,6-iPr₂ C₆ H₃ NHC(Ph)=NC₆ H₄ (o-PPh₂ ) (² L), and Ph₂ PN(R)PPh₂ (R=iPr (³ L), cyclo-C₆ H₁₁ (⁴ L), tBu (⁵ L), CH₂ C₄ H₇ O (⁶ L)) each with dicobalt octacarbonyl produced complexes [¹ LCo(CO)₃ ]₂ (1), [² LCo(CO)(μ-CO)₂ Co(CO)₃ ] (2), [³ LCo(CO)₃ ]⁺ [Co(CO)₄ ]^- (3), [³ LCo(CO)₂ ]₂ (4), [⁴ LCo(CO)₂ ]₂ (5), [⁵ LCo(CO)₂ ]⁺ [Co(CO)₄ ]^- (6), and [⁶ LCo(CO)₂ ]⁺ [Co(CO)₄ ]^- (7). Complexes 1-7 have all been structurally characterized by X-ray crystallography, IR and NMR spectroscopies, and elemental analysis. Catalytic tests on transformation of ethylene oxide (EO), CO and MeOH into methyl 3-hydroxypropionate (3-HMP) indicate that complexes 1-7 are active, where ion-pair complexes 3 and 6-7 behave more excellently (by achieving 88.4-93.6% 3-HMP yields) than the neutral species 1-2 and 4-5 (35.0-46.5% 3-HMP yields) when the reactions are all operated at 2 MPa CO pressure and 50 °C in MeOH solvent. Density functional theory (DFT) study by selecting 3 as a model suggests a cooperative catalytic reaction mechanism by [Co(CO)₄ ]^- and its counter cation [³ LCo(CO)₃ ]⁺ . The cobalt-homonuclear ion-pair catalyzed hydroalkoxycarbonylation of EO is present herein.

A Diverse Array of C-C Bonds Formed at a Tantalum Metal Center

We demonstrate the formation of a diverse array of organic and organometallic products containing newly formed C-C bonds via successive methyl transfers from di-, tri-, and tetramethyl Ta(V) precursors to unsaturated small molecule substrates under mild conditions. The reactions of Ta(V) methyl complexes 1-X [H₂B(^MesIm)₂]TaMe₃X (X = Me, Cl; Im = imidazole, Mes = 2,4,6-trimethylphenyl) with CO led to oxo enolate Ta(V) products, in which the enolate ligands were constructed from Ta-Me groups and two equivalents of CO. Similarly, the reaction of 1-Me with CNXyl yielded an imido enamine Ta(V) product. Surprisingly, 1-Cl reacted with CNXyl (1 equiv) at the borate backbone of the [H₂B(^MesIm)₂] ligand with concomitant methyl transfer from the metal center to form a new, dianionic scorpionate ligand that supported a Ta(V) dimethyl chloro complex (6). Treatment of 1-Cl with further CNXyl led to an azaallyl scorpionate complex, and an imido isocyanide scorpionate complex, along with propene and xylyl ketenimine. Complex 6 reacted with CO to yield a pinacol scorpionate complex 10-a new reaction pathway in early transition metal chemistry. Mechanistic studies revealed that this proceeded via migratory insertion of CO into a Ta-Me group, followed by methyl transfer to form an η²-acetone intermediate. Elimination of acetone furnished a CO-stabilized Ta(III) intermediate capable of rebinding and subsequently coupling two equivalents of CO-derived acetone to form the pinacol ligand in 10.

Multi-nuclear, high-pressure, operando FlowNMR spectroscopic study of Rh/PPh3 - catalysed hydroformylation of 1-hexene

The hydroformylation of 1-hexene with 12 bar of 1 : 1 H2/CO in the presence of the catalytic system [Rh(acac)(CO)2]/PPh3 was successfully studied by real-time multinuclear high-resolution FlowNMR spectroscopy at 50 °C. Quantitative reaction progress curves that yield rates as well as chemo- and regioselectivities have been obtained with varying P/Rh loadings. Dissolved H2 can be monitored in solution to ensure true operando conditions without gas limitation. 31P{1H} and selective excitation 1H pulse sequences have been periodically interleaved with 1H FlowNMR measurements to detect Rh-phosphine intermediates during the catalysis. Stopped-flow experiments in combination with diffusion measurements and 2D heteronuclear correlation experiments showed the known tris-phosphine complex [RhH(CO)(PPh3)3] to generate rapidly exchanging isomers of the bis-phosphine complex [Rh(CO)2(PPh3)2] under CO pressure that directly enter the catalytic cycle. A new mono-phosphine acyl complex has been identified as an in-cycle reaction intermediate.

C(sp2) – H functionalization of aldimines and related compounds: advances and prospects

This is the first systematic review of the most relevant approaches to direct C(sp2)–H bond functionalization of azomethine derivatives. The scope of the applicability of various transformations is analyzed. The review assesses prospects of the application of this functionalization strategy in the multistep synthesis of valuable compounds for use in medicinal chemistry, materials science and related areas.

The bibliography includes 124 references.

Palladium-Catalyzed Tandem Carbonylative Diels-Alder Reaction for Construction of Bridged Polycyclic Skeletons

A palladium-catalyzed tandem carbonylative lactonization and Diels-Alder cycloaddition reaction between aldehyde-tethered benzylhalides and alkenes has been developed. A range of alkenes and aldehyde-tethered benzylhalides bearing different substituents can be successfully transformed into the corresponding bridged polycyclic compounds in good yields. This strategy provides a unique approach to complex lactone-containing bridged polycyclic compounds.

Ruthenium-catalysed hydroxycarbonylation of olefins

A ruthenium-catalysed hydroxycarbonylation of olefins. We report a ruthenium-catalysed hydroxycarbonylation of unfunctionalized olefins.

Solar and visible-light active nano Ni/g-C3N4 photocatalyst for carbon monoxide (CO) and ligand-free carbonylation reactions

In this study, we investigate the amino and alkoxycarbonylation reaction between various substituted aryl halides, benzyl iodides, and iodocyclohexane with different types of amines and alcohols in the absence of carbon monoxide gas and ligands.

A direct synthesis of carboxylic acids via platinum-catalysed hydroxycarbonylation of olefins

A selective platinum-catalysed hydroxycarbonylation of aliphatic olefins has been achieved.

Dependency of solvation effects on metal identity in surface reactions

Solvent interactions with adsorbed moieties involved in surface reactions are often believed to be similar for different metal surfaces. However, solvents alter the electronic structures of surface atoms, which in turn affects their interaction with adsorbed moieties. To reveal the importance of metal identity on aqueous solvent effects in heterogeneous catalysis, we studied solvent effects on the activation free energies of the O-H and C-H bond cleavages of ethylene glycol over the (111) facet of six transition metals (Ni, Pd, Pt, Cu, Ag, Au) using an explicit solvation approach based on a hybrid quantum mechanical/molecular mechanical (QM/MM) description of the potential energy surface. A significant metal dependence on aqueous solvation effects was observed that suggests solvation effects must be studied in detail for every reaction system. The main reason for this dependence could be traced back to a different amount of charge-transfer between the adsorbed moieties and metals in the reactant and transition states for the different metal surfaces.

Enhancing the stability of the Rh/ZnO catalyst by the growth of ZIF-8 for the hydroformylation of higher olefins

Hydroformylation of olefins is one of the most important industrial processes for aldehyde production. Therein, the leaching of active metals for heterogeneous catalysts is an important issue in the hydroformylation reaction, particularly for higher olefins to produce higher alcohols. Here, different Rh/ZnO catalysts with diverse ZnO as a support were investigated and a home-made ZnO₅₀ support was selected to prepare the Rh/ZnO₅₀@ZIF-8 core–shell structure catalyst, which was synthesized by the growth of ZIF-8 with ZnO₅₀ as the sacrificed template to afford Zn source. Compared with the Rh/ZnO₅₀ catalyst, the Rh/ZnO₅₀@ZIF-8 catalyst demonstrated a better cyclic stability in the hydroformylation of 1-dodecene. Combining the experiment and characterization results, it was concluded that the ZIF-8 shell on the Rh/ZnO₅₀ catalyst effectively prevented the leaching of metal Rh into the reaction solution. Moreover, the Rh/ZnO₅₀@ZIF-8 catalyst exhibited good universality for other higher olefins. This work provides a useful guideline for immobilizing the active species in heterogeneous catalysts for the hydroformylation reaction.

The stability of the Rh/ZnO catalyst in the hydroformylation of 1-dodecene obviously improved, which was attributed to that the ZIF-8 shell on the Rh/ZnO catalyst effectively prevented the leaching of metal Rh.