Photophysics of soft and hard molecular assemblies based on luminescent complexes

One Dianionic Luminophore with Three Coordination Modes Binding Four Different Metals: Toward Unexpectedly Phosphorescent Transition Metal Complexes

This work reports on a battery of coordination compounds featuring a versatile dianionic luminophore adopting three different coordination modes (mono, bi, and tridentate) while chelating Pd(II), Pt(II), Au(III), and Hg(II) centers. An in-depth structural characterization of the ligand precursor (H2 L) and six transition metal complexes ([HLPdCNtBu], [LPtCl], [LPtCNtBu], [LPtCNPhen], [HLHgCl], and [LAuCl]) is presented. The influence of the cations and coordination modes of the luminophore and co-ligands on the photophysical properties (including photoluminescence quantum yields (ΦL ), excited state lifetimes (τ), and average (non-)radiative rate constants) are evaluated at various temperatures in different phases. Five complexes show interesting photophysical properties at room temperature (RT) in solution. Embedment in frozen glassy matrices at 77 K significantly boosts their luminescence by suppressing radiationless deactivation paths. Thus, the Pt(II)-based compounds provide the highest efficiencies, with slight variations upon exchange of the ancillary ligand. In the case of [HLPdCNtBu], both ΦL and τ increase over 30-fold as compared to RT. Furthermore, the Hg(II) complex achieves, for the first time in its class, a ΦL exceeding 60% and millisecond-range lifetimes. This demonstrates that a judicious ligand design can pave the way toward versatile coordination compounds with tunable excited state properties.

Catalyzing Singlet Fission by Transition Metals: Second versus Third Row Effects

The synthesis and characterization of platinum(II) and palladium(II) complexes bearing two (dimers Pt(Lpc)2Cl2 and Pd(Lpc)2Cl2), one (monomers Pt(Lpc)(Lref)Cl2 and Pd(Lpc)(Lref)Cl2), or no (reference compounds Pt(Lref)2Cl2 and Pd(Lref)2Cl2) pentacene-based pyridyl ligands are presented. Photophysical properties of the dimers are probed by means of steady-state and time-resolved transient absorption measurements in comparison to the monomer and model compounds. Our results document that despite enhanced spin-orbit coupling from the presence of heavy atoms, intramolecular singlet fission (iSF) is not challenged by intersystem crossing. iSF thus yields correlated triplet pairs and even uncorrelated triplet excited states upon decoherence. Importantly, significant separation of the two pentacenyl groups facilitates decoupling of the two chromophores. Furthermore, the mechanism of iSF is altered depending on the respective metal center, that is, Pt(II) versus Pd(II). The dimer based on Pt(II), Pt(Lpc)2Cl2, exhibits a direct pathway for the iSF and forms a correlated triplet pair with singlet-quintet spin-mixing within 10 ns in variable solvents. On the other hand, the dimer based on Pd(II), Pd(Lpc)2Cl2, leads to charge transfer mixing during the population of the correlated triplet pair that is dependent on solvent polarity. Moreover, Pd(Lpc)2Cl2 gives rise to a stable equilibrium between singlet and quintet correlated triplet pairs with lifetimes of up to 170 ns. Inherent differences in the size and polarizability, when contrasting platinum(II) with palladium(II), are the most likely rationale for the underlying trends.

Room-Temperature Phosphorescence from Pd(II) and Pt(II) Complexes as Supramolecular Luminophores: The Role of Self-Assembly, Metal-Metal Interactions, Spin-Orbit Coupling, and Ligand-Field Splitting

The synthesis as well as the structural and photophysical characterization of two isoleptic bis-cyclometalated Pt(II) and Pd(II) complexes, namely [PtL] and [PdL], bearing a tailored dianionic tetradentate ligand (L2-) are reported. The isostructural character and intermolecular interactions of [PtL] and [PdL] were assessed by NMR spectroscopy and X-ray diffraction analysis. Both complexes show fully ligand-controlled aggregation, demonstrating that a judicious molecular design can tune the photophysical properties. In fact, by introduction of fluorine atoms on defined positions and methoxy groups on complementary sites, metal-metal interactions can be forced by a head-to-tail stacking. Hence, [PtL] shows luminescence from metal-perturbed ligand-centered or from metal-metal-to-ligand charge-transfer triplet states in diluted solutions, in frozen glasses and in crystals, with high photoluminescence quantum yields and long lifetimes in the microsecond range. At room temperature (RT) in concentrated fluid solutions, the palladium analogue [PdL] surprisingly emits luminescence from aggregated species involving supramolecular interactions. Time-resolved photoluminescence and transient absorption spectroscopies demonstrated that ultrafast intersystem crossing occurs for both metals, which outruns any competitive relaxation pathway from the photoexcited singlet state. Furthermore, we demonstrate that the radiationless deactivation can be suppressed in frozen glassy matrices at 77 K and by intermolecular interactions in fluid solutions at RT. In both cases and as indicated by density functional theory calculations, the lowest emissive state acts as an energy trap from which the thermal population of dissociative states with formal occupation of an antibonding Pd-centered 4dx2-y2 orbital is suppressed. This occurs as the energy gap between the emissive and the dark states surpasses kT.

Luminescent Vesicles and Lyotropic Liquid Crystals in Ethylammonium Nitrate from a Partially Amphiphilic Eu Complex

Soft luminescent materials have attracted much attention because of their self-assembled and controllable properties. To explore their facile and effective fabrication ways, we report here the self-assembling of luminescent vesicles and lyotropic liquid crystals (LLCs) in a protic ionic liquid, ethylammonium nitrate, by a partially amphiphilic europium β-diketonate complex (Eu(III)) with a 1-dodecyl-3-methylimidazolium cation as the counter ion. An interesting result came from the complex-induced vesicle formation of corresponding amphiphile, 1-dodecyl-3-methylimidazolium bromide ([C₁₂mim]Br), which has been rarely reported in the past. It was the interaction between the Eu(III) and imidazolium group that changed the critical packing parameter of [C₁₂mim]Br, which finally resulted in the occurrence of vesicles. The obtained vesicle aggregates exhibited enhanced fluorescence intensity and lifetime compared to those of Eu(III) solution. Meanwhile, a hexagonal LLC phase with better fluorescence properties was found at higher [C₁₂mim]Br concentration. The obtained photophysical data confirmed that the order degree of Eu(III)-containing aggregates could effectively increase the energy transition efficiency of ligands. The better luminescent properties of LLC resulted from the stronger stabilizing and binding effects on Eu(III) in LLC than that in vesicles, which might be caused by closer molecular packing in LLC. The results presented here will not only expand the strategy of constructing lanthanide-containing luminescent soft materials in ionic liquids but also provide reference to better understand the effect of organized aggregates on luminescence properties.

Dimensional Control and Morphological Transformations of Supramolecular Polymeric Nanofibers Based on Cofacially-Stacked Planar Amphiphilic Platinum(II) Complexes

Square-planar platinum(II) complexes often stack cofacially to yield supramolecular fiber-like structures with interesting photophysical properties. However, control over fiber dimensions and the resulting colloidal stability is limited. We report the self-assembly of amphiphilic Pt(II) complexes with solubilizing ancillary ligands based on polyethylene glycol [PEG_n, where n = 16, 12, 7]. The complex with the longest solubilizing PEG ligand, Pt-PEG₁₆, self-assembled to form polydisperse one-dimensional (1D) nanofibers (diameters <5 nm). Sonication led to short seeds which, on addition of further molecularly dissolved Pt-PEG₁₆ complex, underwent elongation in a "living supramolecular polymerization" process to yield relatively uniform fibers of length up to ca. 400 nm. The fiber lengths were dependent on the Pt-PEG₁₆ complex to seed mass ratio in a manner analogous to a living covalent polymerization of molecular monomers. Moreover, the fiber lengths were unchanged in solution after 1 week and were therefore "static" with respect to interfiber exchange processes on this time scale. In contrast, similarly formed near-uniform fibers of Pt-PEG₁₂ exhibited dynamic behavior that led to broadening of the length distribution within 48 h. After aging for 4 weeks in solution, Pt-PEG₁₂ fibers partially evolved into 2D platelets. Furthermore, self-assembly of Pt-PEG₇ yielded only transient fibers which rapidly evolved into 2D platelets. On addition of further fiber-forming Pt complex (Pt-PEG₁₆), the platelets formed assemblies via the growth of fibers selectively from their short edges. Our studies demonstrate that when interfiber dynamic exchange is suppressed, dimensional control and hierarchical structure formation are possible for supramolecular polymers through the use of kinetically controlled seeded growth methods.

Phosphorescent Pt(ii) complexes bearing a monoanionic C^N^N luminophore and tunable ancillary ligands

A new monoanionic pincer luminophore is presented, yielding phosphorescent Pt(ii) complexes bearing a neutral 1,2,3-triazole ring introduced via click chemistry. The overall charge, intermolecular interactions and excited state properties can be manipulated and controlled.

Length control of supramolecular polymeric nanofibers based on stacked planar platinum(II) complexes by seeded-growth

The formation of high aspect ratio supramolecular polymeric nanofibers from square-planar platinum(II) complexes through Pt···Pt and π-π stacking interactions has been achieved with a small width (<15 nm), tunable length, and relatively narrow length distributions up to ca. 400 nm under conditions of kinetic control using small seed fibers as initiators.

Luminescent supramolecular soft nanostructures from amphiphilic dinuclear Re(I) complexes

Luminescent metallo-surfactants based on highly emissive dinuclear Re(I) complexes have been synthesized combining the peculiar photophysical behaviour of this class of neutral hydrophobic complexes with new properties imparted by hydrophilic chains anchored on the coordinated chromophoric ligand. In solution, the resulting neutral amphiphiles tend to self-assembly in soft structures. The aggregation properties have been thoroughly investigated in dioxane-water mixtures, where all the complexes assembly in globular-like supramolecular architectures with well-defined size (hydrodynamic diameter = 200-400 nm). The morphology of these nano-objects has been completely characterized with Dynamic Light Scattering (DLS) analysis, Scanning Transmission Electron Microscopy (STEM) and cryo-TEM to determine the size, polydispersity, and stability of the nanoparticles in relationship with the structure of the metallo-surfactants. The photophysical properties of both the isolated metal complexes and their aggregates have been investigated by means of UV-Vis absorption, steady-state and time-resolved emission spectroscopy. Noteworthy, the self-assembly properties of the reported luminescent rhenium metallo-amphiphiles can be modulated by solvent polarity. Even more importantly, such aggregation process yielded a small hypsochromic shift of the emission energy accompanied by a sizeable elongation of the excited-state lifetime and an enhancement of the photoluminescence quantum yield, reaching a remarkably high value of 0.20 despite the air-equilibrated aqueous condition. The presented findings endorse novel possibilities for the efficient use of soft-nanostructures based on metallo-amphiphiles in dual (electron and optical microscopy) bio-imaging applications and theranostics where the non-covalent nature of the intermolecular interactions would offer the powerful and unique possibility to reversibly assemble and disassemble imaging agents.

A luminescent poly(amidoamine)-iridium complex as a new singlet-oxygen sensitizer for photodynamic therapy

A polymer complex (1P) was synthesized by binding bis(cyclometalated) Ir(ppy)2(+) fragments (ppy = 2-phenylpyridyl) to phenanthroline (phen) pendants of a poly(amidoamine) copolymer (PhenISA, in which the phen pendants involved ∼6% of the repeating units). The corresponding molecular complex [Ir(ppy)2(bap)](+) (1M, bap = 4-(butyl-4-amino)-1,10-phenanthroline) was also prepared for comparison. In water solution 1P gives nanoaggregates with a hydrodynamic diameter of 30 nm in which the lipophilic metal centers are presumed to be segregated within polymer tasks to reduce their interaction with water. Such confinement, combined with the dilution of triplet emitters along the polymer chains, led to 1P having a photoluminescence quantum yield greater than that of 1M (0.061 vs 0.034, respectively, in an aerated water solution) with a longer lifetime of the (3)MLCT excited states and a blue-shifted emission (595 nm vs 604 nm, respectively). NMR data supported segregation of the metal centers. Photoreaction of O2 with 1,5-dihydroxynaphthalene showed that 1P is able to sensitize (1)O2 generation but with half the quantum yield of 1M. Cellular uptake experiments showed that both 1M and 1P are efficient cell staining agents endowed with two-photon excitation (TPE) imaging capability. TPE microscopy at 840 nm indicated that both complexes penetrate the cellular membrane of HeLa cells, localizing in the perinuclear region. Cellular photodynamic therapy tests showed that both 1M and 1P are able to induce cell apoptosis upon exposure to Xe lamp irradiation. The fraction of apoptotic cells for 1M was higher than that for 1P (74 and 38%, respectively) 6 h after being irradiated for 5 min, but cells incubated with 1P showed much lower levels of necrosis as well as lower toxicity in the absence of irradiation. More generally, the results indicate that cell damage induced by 1M was avoided by binding the iridium sensitizers to the poly(amidoamine).

Anisotropically luminescent hydrogels containing magnetically-aligned MWCNTs-Eu(III) hybrids

The anisotropic emission properties of an Eu(III)-MWCNTs-based nanocomposite PNIPAAm hydrogel is induced upon application of a 10 T magnetic field, the latter dictating the alignment of the carbon nanotubes. This structuration creates directional highways for light to be preferentially absorbed, giving rise to orientation-dependent light emission intensity. Thermal control of the transparency of the aqueous matrix also allowed a stimulus-induced switching of the materials' emission properties.

Click synthesis, aggregation-induced emission, E/Z isomerization, self-organization, and multiple chromisms of pure stereoisomers of a tetraphenylethene-cored luminogen

It has been difficult to decipher the mechanistic issue whether E/Z isomerization is involved in the aggregation-induced emission (AIE) process of a tetraphenylethene (TPE) derivative, due to the difficulty in the synthesis of its pure E and Z conformers. In this work, pure stereoisomers of a TPE derivative named 1,2-bis{4-[1-(6-phenoxyhexyl)-4-(1,2,3-triazol)yl]phenyl}-1,2-diphenylethene (BPHTATPE) are successfully synthesized. Both isomers show remarkable AIE effect (α(AIE) ≥ 322) and high fluorescence quantum yield in the solid state (Φ(F) 100%). The conformers readily undergo E/Z isomerization upon exposure to a powerful UV light and treatment at a high temperature (>200 °C). Such conformational change, however, is not observed under normal fluorescence spectrum measurement conditions, excluding the involvement of the E/Z isomerization in the AIE process of the TPE-based luminogen. The molecules of (E)-BPHTATPE self-organize into ordered one-dimensional nanostructures such as microfibers and nanorods that show obvious optical waveguide effect. BPHTATPE shows rich chromic effects, including mechano-, piezo-, thermo-, vapo-, and chronochromisms. Its emission peak is bathochromically shifted by simple grinding and pressurization and the spectral change is reversed by fuming with a polar solvent, heating at a high temperature, or storing at room temperature for some time. The multiple chromic processes are all associated with changes in the modes of molecular packing.