Beneficial effects of hyaluronic acid

In Vitro and Ex Vivo Evaluation of Novel Methacrylated Chitosan-PNIPAAm-Hyaluronic Acid Hydrogels Loaded with Progesterone for Applications in Vaginal Delivery

Miscarriage is defined as the loss of a pregnancy before 24 weeks and administration of progesterone in pregnancy has considerably decreased the risk of premature birth. Progesterone (PGT) starting from the luteal phase stabilizes pregnancy, promotes differentiation of the endometrium, and facilitates the implantation of the embryo. Within the present study, novel hybrid hydrogels based on chitosan methacrylate (CHT), hyaluronic acid (HA), and poly(N-isopropylacrylamide) (PNIPAAm) for vaginal delivery of progesterone were evaluated. The hydrogels were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) for structural identity assessment and evaluation of their morphological aspects. The ability to swell, the release capacity, enzymatic degradation, cytotoxicity, and mucoadhesion were also reported. The characterized hydrogels demonstrated mucoadhesive properties in contact with the vaginal tissue of swine and bovine origin as substrates, and biodegradability and controlled release in a simulated vaginal environment. Cytocompatibility tests confirmed the ability of the hydrogels and progesterone to support cell viability and growth. The results showed pH-dependent behavior, controlled drug release, good cytocompatibility, and mucoadhesive properties. The hydrogels with higher chitosan amounts demonstrated better bioadhesive properties. This study provides insights into the potential of these hydrogels for the controlled vaginal delivery of progesterone, with promising therapeutic effects and no cytotoxicity observed. The experimental results indicated that a composition with a moderate content of PNIPAAm was suitable for the controlled delivery of progesterone.

High molecular weight hyaluronic acid-liposome delivery system for efficient transdermal treatment of acute and chronic skin photodamage

Photodamage is one of the most common causes of skin injury. High molecular weight hyaluronic acid (HHA) has shown immense potential in the treatment of skin photodamage by virtue of its anti-inflammatory, reparative, and antioxidative properties. However, due to its large molecular structure of HHA, HHA solution could only form a protective film on the skin surface in conventional application, failing to effectively penetrate the skin, which necessitates the development of new delivery strategies. Liposomes, with a structure similar to biological membranes, have garnered extensive attention as transdermal drug delivery carriers because of their advantages in permeability, dermal compatibility, and biosafety. Herein, we have developed a HHA-liposome transdermal system (HHL) by embedding HHA into the liposome structure using reverse evaporation, high-speed homogenization, and micro-jet techniques. The effective penetration and long-term residence of HHA in skin tissue were multidimensionally verified, and the kinetics of HHA in the skin were extensively studied. Moreover, it was demonstrated that HHL significantly strengthened the activity of human keratinocytes and effectively inhibits photo-induced cellular aging in vitro. Furthermore, a murine model of acute skin injury induced by laser ablation was established, where the transdermal system showed significant anti-inflammatory and immunosuppressive properties, promoting skin proliferation and scar repair, thereby demonstrating immense potential in accelerating skin wound healing. Meanwhile, HHL significantly ameliorated skin barrier dysfunction caused by simulated sunlight exposure, inhibited skin erythema, inflammatory responses, and oxidative stress, and promoted collagen expression in a chronic photodamage skin model. Therefore, this transdermal delivery system with biocompatibility represents a promising new strategy for the non-invasive application of HHA in skin photodamage, revealing the significant potential for clinical translation and broad application prospects. STATEMENT OF SIGNIFICANCE: The transdermal system utilizing hyaluronic acid-based liposomes enhances skin permeability and retains high molecular weight hyaluronic acid (HHL). In vitro experiments with human keratinocytes demonstrate significant skin repair effects of HHL and its effective inhibition of cellular aging. In an acute photodamage model, HHL exhibits stronger anti-inflammatory and immunosuppressive properties, promoting skin proliferation and scar repair. In a chronic photodamage model, HHL significantly improves skin barrier dysfunction, reduces oxidative stress induced by simulated sunlight, and enhances collagen expression.

Streptococcus thermophilus iHA318 Improves Dry Eye Symptoms by Mitigating Ocular Surface Damage in a Mouse Model

Dry eye is a complicated ocular surface disease that causes discomfort, visual disturbance, and frequently observed ocular surface damage. Emerging hypotheses suggest probiotics may help relieve dry eye symptoms by modulating inflammation and oxidative stress. This study aimed to investigate the therapeutic effects of Streptococcus thermophilus iHA318 probiotics on dry eye using in vitro assays and an in vivo murine model of ultraviolet B (UVB) radiation-induced dry eye. In vitro analyses revealed that S. thermophilus iHA318® exhibited antioxidant activity and anti-inflammatory effects by inhibiting reactive oxygen species production and suppressing inflammatory cytokines. For the in vivo study, female ICR mice were assigned to normal control, UVB-induced dry eye, and UVB+iHA318 treatment groups. UVB exposure significantly decreased tear volume and tear film breakup time (TBUT) compared to normal controls. Supplementation with S. thermophilus iHA318® via oral gavage markedly improved tear production and TBUT on day 7 post-UVB exposure. Ocular surface photography demonstrated improved gradings of corneal opacity, smoothness, and lissamine green staining in the iHA318 group versus the UVB group. Topographical analysis further revealed improvement in the UVB-induced corneal irregularities by iHA318 treatment. Collectively, these results indicate that S. thermophilus iHA318 exerts a protective effect against dry eye symptoms by mitigating oxidative stress and inflammation, thereby preserving tear film stability and ocular surface integrity. This probiotic strain represents a promising therapeutic approach for managing dry eye syndrome.

A Review of Recent Developments in Biopolymer Nano-Based Drug Delivery Systems with Antioxidative Properties: Insights into the Last Five Years

In recent years, biopolymer-based nano-drug delivery systems with antioxidative properties have gained significant attention in the field of pharmaceutical research. These systems offer promising strategies for targeted and controlled drug delivery while also providing antioxidant effects that can mitigate oxidative stress-related diseases. Generally, the healthcare landscape is constantly evolving, necessitating the continual development of innovative therapeutic approaches and drug delivery systems (DDSs). DDSs play a pivotal role in enhancing treatment efficacy, minimizing adverse effects, and optimizing patient compliance. Among these, nanotechnology-driven delivery approaches have garnered significant attention due to their unique properties, such as improved solubility, controlled release, and targeted delivery. Nanomaterials, including nanoparticles, nanocapsules, nanotubes, etc., offer versatile platforms for drug delivery and tissue engineering applications. Additionally, biopolymer-based DDSs hold immense promise, leveraging natural or synthetic biopolymers to encapsulate drugs and enable targeted and controlled release. These systems offer numerous advantages, including biocompatibility, biodegradability, and low immunogenicity. The utilization of polysaccharides, polynucleotides, proteins, and polyesters as biopolymer matrices further enhances the versatility and applicability of DDSs. Moreover, substances with antioxidative properties have emerged as key players in combating oxidative stress-related diseases, offering protection against cellular damage and chronic illnesses. The development of biopolymer-based nanoformulations with antioxidative properties represents a burgeoning research area, with a substantial increase in publications in recent years. This review provides a comprehensive overview of the recent developments within this area over the past five years. It discusses various biopolymer materials, fabrication techniques, stabilizers, factors influencing degradation, and drug release. Additionally, it highlights emerging trends, challenges, and prospects in this rapidly evolving field.

Hyaluronic acid-based gels for oral application: Comparison of in vitro effects on gingival cells and bacteria

Purpose

This study aimed to evaluate the cytotoxic effects of different topical hyaluronic acid-based gels on human gingival fibroblasts and oral bacteria.

Methods

Four different hyaluronate gels - Bexident® Aftas (BA), GUM® AftaClear (AfC), Gengigel®(G), Aloclair® Plus (AlC) and a chlorhexidine gel - Bexident®Gums(BG) were selected. Human gingival fibroblasts (HGF) were seeded in 48-well plates with different gel/culture medium concentrations (v/v%) and cell viability was evaluated at 1 and 3 days of culture. Cell morphology was assessed, and alterations graded according to ISO 10993-5:2009(E). Streptococcus oralis CECT 907T colony was, seed on 48-well plate or spread onto the blood agar plates and exposed to the different gel's concentration. The optical density (OD) was assessed, and the diameter of the inhibition zone was measured (mm).

Results

BA and G elicited reduced HGF cytotoxicity, followed by AfC. AlC and BG were cytotoxic at concentrations up to 3% for all exposure times. PCM images of HGF showed moderate-to-severe alterations for AlC and BG and slight to mild changes, for BA, AfC and G. The highest antibacterial activity against S.oralis was observed on AlC and AfC, and no antibacterial activity was observed for BA and G. Inhibitory effect in sessile colonies was only observed in AlC and BG.

Conclusions

AlC demonstrated superior antibacterial activities against S.oralis but a higher cytotoxic potential in HGF. BA and G presented the lowest cytotoxicity with little to no antibacterial effect. AfC demonstrated bacteriostatic effects and low cytotoxicity on HGF.

Studies on Loading Salicylic Acid in Xerogel Films of Crosslinked Hyaluronic Acid

During the last decades, salicylic acid (SA) and hyaluronic acid (HA) have been studied for a wide range of cosmetic and pharmaceutical applications. The current study investigated the drug loading potential of SA in HA-based crosslinked hydrogel films using a post-loading (osmosis) method of the unmedicated xerogels from saturated aqueous solutions of salicylic acid over a range of pH values. The films were characterized with Fourier-transform infra-red spectroscopy (FT-IR) and ultraviolet-visible (UV-Vis) spectrophotometry in order to elucidate the drug loading profile and the films' integrity during the loading process. Additional studies on their weight loss (%), gel fraction (%), thickness increase (%) and swelling (%) were performed. Overall, the studies showed significant film disintegration at highly acidic and basic solutions. No drug loading occurred at neutral and basic pH, possibly due to the anionic repulsion between SA and HA, whereas at, pH 2.1, the drug loading was promising and could be detected via UV-Vis analysis of the medicated solutions, with the SA concentration in the xerogel films at 28% w/w.

Anti-aging Strategies and Topical Delivery of Biopolymer-based Nanocarriers for Skin Cancer Treatment

Environmental factors like UV radiation and epigenetic changes are significant factors for skin cancer that trigger early aging. This review provides essential information on cancer development concerning aging, the receptors involved, and the therapeutic targets. Biopolymers like polysaccharide, polyphenols, proteins, and nucleic acid plays a vital role in the regulation of normal cell homeostasis. Therefore, it is pertinent to explore the role of biopolymers as antiaging formulations and the possibility of these formulations being used against cancer via topical administrations. As UV radiation is one of the predominant factors in causing skin cancer, the association of receptors between aging and cancer indicated that insulin receptor, melatonin receptor, toll-like receptor, SIRT 1 receptor, tumor-specific T cell receptor and mitochondria-based targeting could be used to direct therapeutics for suppression of cancer and prevent aging. Biopolymer-based nanoformulations have tremendously progressed by entrapment of drugs like curcumin and resveratrol which can prevent cancer and aging simultaneously. Certain protein signaling or calcium and ROS signaling pathways are different for cancer and aging. The involvement of mitochondrial DNA mutation along with telomere shortening with a change in cellular energetics leading to genomic instability in the aging process can also induce mitochondrial dysfunction and epigenetic alterations leading to skin cancer. Therefore, the use of biopolymers as a topical supplement during the aging process can result in the prevention of cancer.

A Comprehensive Review on Potential Chemical and Herbal Permeation Enhancers Used in Transdermal Drug Delivery Systems

Using skin patches to deliver drugs is dependable and doesn't have the same issues as permeation enhancers, which help drugs get through the skin but struggle because of the skin's natural barrier. Strategies are required to increase topical bioavailability to enhance drug absorption. Natural compounds offer a promising solution by temporarily reducing skin barrier resistance and improving drug absorption. Natural substances allow a wider variety of medications to be distributed through the stratum corneum, offering a dependable approach to enhancing transdermal drug delivery. Natural substances have distinct advantages as permeability enhancers. They are pharmacologically effective and safe, inactive, non-allergenic, and non-irritating. These characteristics ensure their suitability for use without causing adverse effects. Natural compounds are readily available and well tolerated by the body. Studies investigating the structure-activity relationship of natural chemicals have demonstrated significant enhancer effects. By understanding the connection between chemical composition and enhancer activity, researchers can identify effective natural compounds for improving drug penetration. In conclusion, current research focuses on utilizing natural compounds as permeability enhancers in transdermal therapy systems. These substances offer safety, non-toxicity, pharmacological inactivity, and non-irritation. Through structure-activity relationship investigations, promising advancements have been made in enhancing drug delivery. Using natural compounds holds enormous potential for improving the penetration of trans-dermally delivered medications.

Stimulus-Responsive Hydrogels as Drug Delivery Systems for Inflammation Targeted Therapy

Deregulated inflammations induced by various factors are one of the most common diseases in people's daily life, while severe inflammation can even lead to death. Thus, the efficient treatment of inflammation has always been the hot topic in the research of medicine. In the past decades, as a potential biomaterial, stimuli-responsive hydrogels have been a focus of attention for the inflammation treatment due to their excellent biocompatibility and design flexibility. Recently, thanks to the rapid development of nanotechnology and material science, more and more efforts have been made to develop safer, more personal and more effective hydrogels for the therapy of some frequent but tough inflammations such as sepsis, rheumatoid arthritis, osteoarthritis, periodontitis, and ulcerative colitis. Herein, from recent studies and articles, the conventional and emerging hydrogels in the delivery of anti-inflammatory drugs and the therapy for various inflammations are summarized. And their prospects of clinical translation and future development are also discussed in further detail.

Poloxamer sols endowed with in-situ gelability and mucoadhesion by adding hypromellose and hyaluronan for prolonging corneal retention and drug delivery

The purpose of this study was to develop poloxamer (P407)-based in-situ thermogellable hydrogels with reducing concentration of P407 by adding hypromellose (HPMC) and with enhancing mucoadhesion of resulting hydrogels by adding hyaluronic acid (HA) for prolonging ocular delivery of hydroxypropyl-β-cyclodextrin (HPβCD)-solubilized testosterone (TES). Results demonstrated that 0.5% TES solution was successfully solubilized with adding 10% HPβCD. Non-gellable 13% P407 sol became in-situ gellable with adding 2.0-2.5% HPMC and mucoadhesibility was further imporved with adding 0.3% HA-L (low MW) or HA-H (high MW). Optimized 0.5% HPβCD-solubilized TES P407-based thermogellable hydrogels with enhancement of mucoadhesion for prolonging ocular delivery comprised 13% P407, 2.5% HPMC, and 0.3% HA-L or HA-H. Furthermore, rheological measurements under simulated eye blinking confirmed that non-thixotropic properties of optimized hydrogels could be spreaded evenly and retain a greater amount of drug-loaded hydrogels on the ocular surface for a longer period to prolong drug delivery. Compared with conventional eye drops, the prolonged residence time of optimized hydrogels from ex vivo and in vivo studies were observed, indicating relationships between rheological properties and in vivo performances. It was concluded that P407-based thermosensitive hydrogels with reducing concentration of P407 and enhancing mucoadhesion was successfully formulated by adding 2.5% HPMC and 0.3% HA in 13% P407 for potentially accomplishing effective clinical treatment of DED.

Identification, quantification, and structural role of N-glycans in two highly purified isoforms of sheep testicular hyaluronidase

Animal-derived hyaluronidase, which hydrolyzes the polysaccharide hyaluronic acid, has been used in medical applications despite its limited purity. Additionally, the N-glycan characterization of sheep testicular hyaluronidase (STH) and its structural role remain poorly understood. In this study, STH was purified from the commercially available STH preparation (containing at least 14 impurity proteins) using heparin-affinity chromatography followed by size exclusion chromatography. The structure and quantity of N-glycans of STH were investigated using liquid chromatography-electrospray ionization-high energy collision dissociation-tandem mass spectrometry. Two isoforms, H3S1 and H3S2, of STH were obtained (purity >98 %) with a yield of 3.4 % and 5.1 %, respectively. Fourteen N-glycans, including nine core-fucosylated N-glycans (important for the stability and function of glycoproteins), were identified in both H3S1 and H3S2, with similar quantities of each N-glycan. The amino acid sequences of the proteolytic peptides of H3S1 and H3S2 were compared with those reported in STH. The hyaluronic acid-degrading activity of deglycosylated H3S1 and H3S2 was reduced to 70.8 % and 71.1 % compared to that (100 %) of H3S1 and H3S2, respectively. This is the first report of N-glycan characterization of two highly purified isoforms of STH. These H3S1 and H3S2 will be useful for medical use without unwanted effects of partially purified STH.

In Vitro Assessment of the Antidiabetic and Anti-Inflammatory Potential of Artemisia absinthium, Artemisia vulgaris and Trigonella foenum-graecum Extracts Processed Using Membrane Technologies

Recently, there has been increased interest in the discovery of new natural herbal remedies for treating diabetes and inflammatory diseases. In this context, this work analyzed the antidiabetic and anti-inflammatory potential of Artemisia absinthium, Artemisia vulgaris and Trigonella foenum-graecum herbs, which have been studied less from this point of view. Therefore, extracts were prepared and processed using membrane technologies, micro- and ultrafiltration, to concentrate the biologically active principles. The polyphenol and flavone contents in the extracts were analyzed. The qualitative analysis of the polyphenolic compounds was performed via HPLC, identifying chlorogenic acid, rosmarinic acid and rutin in A. absinthium; chlorogenic acid, luteolin and rutin in A. vulgaris; and genistin in T. foenum-graecum. The antidiabetic activity of the extracts was analyzed by testing their ability to inhibit α-amylase and α-glucosidase, and the anti-inflammatory activity was analyzed by testing their ability to inhibit hyaluronidase and lipoxygenase. Thus, the concentrated extracts of T. foenum-graecum showed high inhibitory activity on a-amylase-IC50 = 3.22 ± 0.3 μg/mL-(compared with acarbose-IC50 = 3.5 ± 0.18 μg/mL) and high inhibitory activity on LOX-IC50 = 19.69 ± 0.52 μg/mL (compared with all standards used). The concentrated extract of A. vulgaris showed increased α-amylase inhibition activity-IC50 = 8.57 ± 2.31 μg/mL-compared to acarbose IC50 = 3.5 ± 0.18 μg/mL. The concentrated extract of A. absinthium showed pronounced LOX inhibition activity-IC50 = 19.71 ± 0.79 μg/mL-compared to ibuprofen-IC50 = 20.19 ± 1.25 μg/mL.

Polysaccharides in contact lenses: From additives to bulk materials

As the number of applications has increased, so has the demand for contact lenses comfort. Adding polysaccharides to lenses is a popular way to enhance comfort for wearers. However, this may also compromise some lens properties. It is still unclear how to balance the variation of individual lens parameters in the design of contact lenses containing polysaccharides. This review provides a comprehensive overview of how polysaccharide addition impacts lens wear parameters, such as water content, oxygen permeability, surface wettability, protein deposition, and light transmittance. It also examines how various factors, such as polysaccharide type, molecular weight, amount, and mode of incorporation into lenses modulate these effects. Polysaccharide addition can improve some wear parameters while reducing others depending on the specific conditions. The optimal method, type, and amount of added polysaccharides depend on the trade-off between various lens parameters and wear requirements. Simultaneously, polysaccharide-based contact lenses may be a promising option for biodegradable contact lenses as concerns regarding environmental risks associated with contact lens degradation continue to increase. It is hoped that this review will shed light on the rational use of polysaccharides in contact lenses to make personalized lenses more accessible.

Photocatalytic and Photothermal Antimicrobial Mussel-Inspired Nanocomposites for Biomedical Applications

Bacterial infection has traditionally been treated with antibiotics, but their overuse is leading to the development of antibiotic resistance. This may be mitigated by alternative approaches to prevent or treat bacterial infections without utilization of antibiotics. Among the alternatives is the use of photo-responsive antimicrobial nanoparticles and/or nanocomposites, which present unique properties activated by light. In this study, we explored the combined use of titanium oxide and polydopamine to create nanoparticles with photocatalytic and photothermal antibacterial properties triggered by visible or near-infrared light. Furthermore, as a proof-of-concept, these photo-responsive nanoparticles were combined with mussel-inspired catechol-modified hyaluronic acid hydrogels to form novel light-driven antibacterial nanocomposites. The materials were challenged with models of Gram-negative and Gram-positive bacteria. For visible light, the average percentage killed (PK) was 94.6 for E. coli and 92.3 for S. aureus. For near-infrared light, PK for E. coli reported 52.8 and 99.2 for S. aureus. These results confirm the exciting potential of these nanocomposites to prevent the development of antibiotic resistance and also to open the door for further studies to optimize their composition in order to increase their bactericidal efficacy for biomedical applications.

Hyaluronic acid-graphene oxide quantum dots nanoconjugate as dual purpose drug delivery and therapeutic agent in meta-inflammation

Type 2 diabetes mellitus (T2DM) predominantly considered a metabolic disease is now being considered an inflammatory disease as well due to the involvement of meta-inflammation. Obesity-induced adipose tissue inflammation (ATI) is one of the earliest phenomena in the case of meta-inflammation, leading to the advent of insulin resistance (IR) and T2DM. The key events of ATI are orchestrated by macrophages, which aggravate the inflammatory state in the tissue upon activation, ultimately leading to systemic chronic low-grade inflammation and Non-Alcoholic Steatohepatitis (NASH) through the involvement of proinflammatory cytokines. The CD44 receptor on macrophages is overexpressed in ATI, NASH, and IR. Therefore, we developed a CD44 targeted Hyaluronic Acid functionalized Graphene Oxide Quantum Dots (GOQD-HA) nanocomposite for tissue-specific delivery of metformin. Metformin-loaded GOQD-HA (GOQD-HA-Met) successfully downregulated the expression of proinflammatory cytokines and restored antioxidant status at lower doses than free metformin in both palmitic acid-induced RAW264.7 cells and diet induced obese mice. Our study revealed that the GOQD-HA nanocarrier enhanced the efficacy of Metformin primarily by acting as a therapeutic agent apart from being a drug delivery platform. The therapeutic properties of GOQD-HA stem from both HA and GOQD having anti-inflammatory and antioxidant properties respectively. This study unravels the function of GOQD-HA as a targeted drug delivery option for metformin in meta-inflammation where the nanocarrier itself acts as a therapeutic agent.

A Double Cross-Linked Injectable Hydrogel Derived from Muscular Decellularized Matrix Promotes Myoblast Proliferation and Myogenic Differentiation

Injectable hydrogels possess tremendous merits for use in muscle regeneration; however, they still lack intrinsic biological cues (such as the proliferation and differentiation of myogenic cells), thus considerably restricting their potential for therapeutic use. Herein, we developed a double cross-linked injectable hydrogel composed of methacrylamidated oxidized hyaluronic acid (MOHA) and muscular decellularized matrix (MDM). The chemical composition of the hydrogel was confirmed using 1H NMR and Fourier transform infrared spectroscopy. To achieve cross-linking, the aldehyde groups in MOHA were initially reacted with the amino groups in MDM through a Schiff-based reaction. This relatively weak cross-linking provided the MOHA/MDM hydrogel with satisfactory injectability. Furthermore, the methacrylation of MOHA facilitated a second cross-linking mechanism via UV irradiation, resulting in improved gelation ability, biomechanical properties, and swelling performance. When C2C12 myogenic cells were loaded into the hydrogel, our results showed that the addition of MDM significantly enhanced myoblast proliferation compared to the MOHA hydrogel, as demonstrated by live/dead staining and Cell Counting Kit-8 assay after seven days of in vitro cultivation. In addition, gene expression analysis using quantitative polymerase chain reaction indicated that the MOHA/MDM hydrogel promoted myogenic differentiation of C2C12 cells more effectively than the MOHA hydrogel, as evidenced by elevated expression levels of myogenin, troponin T, and MHC in the MOHA/MDM hydrogel group. Moreover, after four to eight weeks of implantation in a full-thickness abdominal wall-defect model, the MOHA/MDM hydrogel could promote the reconstruction and repair of functional skeletal muscle tissue with enhanced tetanic force and tensile strength. This study provides a new double cross-linked injectable hydrogel for use in muscular tissue engineering.

Dental Materials Applied to 3D and 4D Printing Technologies: A Review

As computer-aided design and computer-aided manufacturing (CAD/CAM) technologies have matured, three-dimensional (3D) printing materials suitable for dentistry have attracted considerable research interest, owing to their high efficiency and low cost for clinical treatment. Three-dimensional printing technology, also known as additive manufacturing, has developed rapidly over the last forty years, with gradual application in various fields from industry to dental sciences. Four-dimensional (4D) printing, defined as the fabrication of complex spontaneous structures that change over time in response to external stimuli in expected ways, includes the increasingly popular bioprinting. Existing 3D printing materials have varied characteristics and scopes of application; therefore, categorization is required. This review aims to classify, summarize, and discuss dental materials for 3D printing and 4D printing from a clinical perspective. Based on these, this review describes four major materials, i.e., polymers, metals, ceramics, and biomaterials. The manufacturing process of 3D printing and 4D printing materials, their characteristics, applicable printing technologies, and clinical application scope are described in detail. Furthermore, the development of composite materials for 3D printing is the main focus of future research, as combining multiple materials can improve the materials' properties. Updates in material sciences play important roles in dentistry; hence, the emergence of newer materials are expected to promote further innovations in dentistry.

Delivery of quercetin for breast cancer and targeting potentiation via hyaluronic nano micelle

Quercetin (QT) is a very effective anticancer drug in combating breast cancer. However, it has several disadvantages such as poor water solubility, low bioavailability and low targeting, which seriously restrict its clinical application. In this work, amphiphilic hyaluronic acid polymers (dHAD) were synthesized by grafting dodecylamine to hyaluronic acid (HA). The dHAD self-assembles with QT to form drug-carrying micelles (dHAD-QT). The dHAD-QT micelles possessed excellent drug-loading capacities (75.9 %) for QT and showed significantly improved CD44 targeting compared with unmodified HA. dHAD-QT micelles exhibited high cytotoxicity and apoptosis-inducing abilities, which were ascribed to the pH-sensitive dHAD-QT micelles accomplishing rapid drug release of QT under low pH condition. Importantly, in vivo experiments showed that dHAD-QT effectively inhibited tumor growth in tumor-bearing mice, with a tumor inhibition rate of 91.8 %. Furthermore, dHAD-QT prolonged the survival time of tumor-bearing mice and reduced the toxicity of the drug to normal tissues. These findings indicate that the designed dHAD-QT micelles have promising potential as efficient nano-drugs for breast cancer treatment.

In-depth characterization of 1,4-butanediol diglycidyl ether substituted hyaluronic acid hydrogels

BDDE substituted HA hydrogels remain the most commonly used HA product in the biomedical field. The physical and biochemical properties of the hydrogels are dependent on the degree of modification and substitution patterns/positions, thus, characterizing their fine structure is of great importance for quality assurance. In this study, we developed novel LC-MS methods for accurate determination of MoD as well as in-depth characterization of the linkage network. Fragments resulted from enzymatic depolymerization were resolved by a porous graphitic carbon column followed by online tandem-MS for determining the modification site/residue. With high-resolution separation, two types of previously unknown structures were detected in the cross-linked fragments of 2-B-2 and 4-B-2. Based on the feature of resistance to NaBH₄ reduction, these structures contain a GlcNAc residue modified at OH1. This special sugar unit likely derived from reducing end of the native polysaccharide could be a signature to discriminate subtle batch to batch variations.

Biomedical applications of chitosan/silk fibroin composites: A review

Natural polymers have been used in the biomedical fields for decades, mainly derived from animals and plants with high similarities with biomacromolecules in the human body. As an alkaline polysaccharide, chitosan (CS) attracts much attention in tissue regeneration and drug delivery with favorable biocompatibility, biodegradation, and antibacterial activity. However, to overcome its mechanical properties and degradation behavior drawbacks, a robust fibrous protein-silk fibroin (SF) was introduced to prepare the CS/SF composites. Not only can CS be combined with SF via the amide and hydrogen bond formation, but also their functions are complementary and tunable with the blending ratio. To further improve the performances of CS/SF composites, natural (e.g., hyaluronic acid and collagen) and synthetic biopolymers (e.g., polyvinyl alcohol and hexanone) were incorporated. Also, the CS/SF composites acted as slow-release carriers for inorganic non-metals (e.g., hydroxyapatite and graphene) and metal particles (e.g., silver and magnesium), which could enhance cell functions, facilitate tissue healing, and inhibit bacterial growth. This review presents the state-of-the-art and future perspectives of different biomaterials combined with CS/SF composites as sponges, hydrogels, membranes, particles, and coatings. Emphasis is devoted to the biological potentialities of these hybrid systems, which look rather promising toward a multitude of applications.

Influence of HA on Release Process of Anionic and Cationic API Incorporated into Hydrophilic Gel

The properties of sodium hyaluronate (HA), such as hygroscopicity, flexibility, the ability to form hydrogels, as well as biocompatibility and biodegradability, are beneficial for the applications in pharmaceutical technology, cosmetics industry, and aesthetic medicine. The aim of this study was to prepare HA-based hydrogels doped with active pharmaceutical ingredient (API): a cationic drug—lidocaine hydrochloride or anionic drug—sodium. The interaction between the carrier and the implemented active pharmaceutical substances was evaluated in prepared systems by applying viscometric measurements, performing release tests of the drug from the obtained formulations, and carrying out FTIR and DSC. The data from release studies were analyzed using the zero-, first-, and second-order kinetics and Higuchi, Korsmeyer-Peppas, and Hixon-Crowell models. The respective kinetic parameters: the release rate constants, the half-release time and, in the case of the Korsmeyer-Peppas equation, the n parameter were calculated. The variability between the obtained release profiles was studied by calculating the difference (f1) and the similarity factor (f2) as well as employing statistical methods. It was revealed that the incorporation of the drugs resulted in an increase in the viscosity of the hydrogels in comparison to the respective drug-free preparations. The dissolution study showed that not entire amount of the added drug was released from the formulation, suggesting an interaction between the carrier and the drug. The FTIR and DSC studies confirmed the bond formation between HA and both medicinal substances.

Cloning and Biochemical Characterization of a Hyaluronate Lyase from Bacillus sp. CQMU-D

Hyaluronidase (HAase) can enhance drug diffusion and dissipate edema by degrading hyaluronic acid (HA) in the extracellular matrix into unsaturated HA oligosaccharides in mammalian tissues. Microorganisms are recognized as valuable sources of HAase. In this study, a new hyaluronate lyase (HAaseD) from Bacillus sp. CQMU-D was expressed in Escherichia coli BL21, purified, and characterized. The results showed that HAaseD belonged to the polysaccharide lyase (PL) 8 family and had a molecular weight of 123 kDa. HAaseD could degrade chondroitin sulfate (CS) -A, CS-B, CS-C, and HA, with the highest activity toward HA. The optimum temperature and pH value of HAaseD were 40°C and 7.0, respectively. In addition, HAaseD retained stability in an alkaline environment and displayed higher activity with appropriate concentrations of metal ions. Moreover, HAaseD was an endolytic hyaluronate lyase that could degrade HA to produce unsaturated HA oligosaccharides. Together, our findings indicate that HAaseD from Bacillus sp. CQMU-D is a new hyaluronate lyase and with excellent potential for application in industrial production.

Potential applications of drug delivery technologies against radiation enteritis

INTRODUCTION

The incidence of abdominal tumors, such as colorectal and prostate cancers, continually increases. Radiation therapy is widely applied in the clinical treatment of patients with abdominal/pelvic cancers, but it often unfortunately causes radiation enteritis (RE) involving the intestine, colon, and rectum. However, there is a lack of suitable treatment options for effective prevention and treatment of RE.

AREAS COVERED

Conventional clinical drugs for preventing and treating RE are usually applied by enemas and oral administration. Innovative gut-targeted drug delivery systems including hydrogels, microspheres, and nanoparticles are proposed to improve the prevention and curation of RE.

EXPERT OPINION

The prevention and treatment of RE have not attracted sufficient attention in the clinical practice, especially compared to the treatment of tumors, although RE takes patients great pains. Drug delivery to the pathological sites of RE is a huge challenge. The short retention and weak targeting of conventional drug delivery systems affect the therapeutic efficiency of anti-RE drugs. Novel drug delivery systems including hydrogels, microspheres, and nanoparticles can allow drugs long-term retention in the gut and targeting the inflammation sites to alleviate radiation-induced injury.

Fast and efficient identification of hyaluronidase specific inhibitors from Chrysanthemum morifolium Ramat. using UF-LC-MS technique and their anti-inflammation effect in macrophages

The purpose of the study was to establish a rapid analytical strategy to screen potential anti-inflammatory compounds from Flos Chrysanthemum flower. The enzyme assay was conducted to prescreen botanical extracts, in which Chrysanthemum morifolium aqueous extract (CME) displayed hyaluronidase (HAase) inhibitory activity in a dose-dependent manner with the values of 8.31, 24.25, and 66.51% at concentrations of 1.00, 2.00, and 4 0.00 mg/mL, respectively. Eight potential compounds targeting HAase (compounds 9, 10, 11, 13, 15, 17, 20 and 21) from CME were screened using ultrafiltration affinity liquid chromatography coupled with mass spectrometry (UF-LC-MS) technology. The well-known inhibitor, dipotassium glycyrrhizinate (DG), was used as a positive control and competitive ligand to eliminate false positives. Then, four of these potential components (compounds 9, 10, 17, and 21), namely eriodictyol-7-O-glucoside, luteoloside, apigenin-7-O-glucoside and diosmetin-7-O-glucoside, were distinguished as potent HAase specific inhibitor candidates with high BD and CBD values. The enzyme inhibitory activities of candidate compounds were verified using enzyme inhibition assay. At a concentration of 1000 μM, compounds 9, 10, 17, and 21 showed 40.15, 44.85, 18.04, and 24.15% inhibition of HAase, respectively. Furthermore, all the four compounds significantly decreased the production of nitric oxide (NO) and IL-6, and significantly suppressed the mRNA expression of inducible NO synthase (iNOS) and IL-1β in both murine and human macrophages.

Vestibular hyaluronic acid injection in provoked vestibulodynia patients and its effect on pain and sexual function: A preliminary report

OBJECTIVE

Provoked vestibulodynia (PVD) is a challenging and distressing problem for women. The aim of this study was to examine the effect of hyaluronic acid (HA) in the management of this condition.

METHOD

This is a retrospective review of 12 women diagnosed with PVD and treated with HA (19 mg/mL) applied, point-by-point, to the vestibular region at 2 mm intervals and at a depth of 0.5 mm. Women completed a pain VAS and a Female Sexual Function Index (FSFI) before and 45 days after treatment.

RESULTS

An improvement was observed both in mean FSFI scores (17.8 to 23.3; p = 0.003) and mean VAS scores (7.2 to 4.1; p = 0.002) after HA application respectively. However, on a telephone interview 3 months post treatment, five women (41.7 %) complained of recurrence of their dyspareunia.

CONCLUSION

HA is a promising management option in provoked vestibulodynia. However, further larger studies with possible alternative regimens and longer follow-up are required.

Theranostic Applications of Glycosaminoglycans in Metastatic Renal Cell Carcinoma

Renal cell carcinoma (RCC) makes up the majority of kidney cancers, with a poor prognosis for metastatic RCC (mRCC). Challenges faced in the management of mRCC, include a lack of reliable prognostic markers and biomarkers for precise monitoring of disease treatment, together with the potential risk of toxicity associated with more recent therapeutic options. Glycosaminoglycans (GAGs) are a class of carbohydrates that can be categorized into four main subclasses, viz., chondroitin sulfate, hyaluronic acid, heparan sulfate and keratan sulfate. GAGs are known to be closely associated with cancer progression and modulation of metastasis by modification of the tumor microenvironment. Alterations of expression, composition and spatiotemporal distribution of GAGs in the extracellular matrix (ECM), dysregulate ECM functions and drive cancer invasion. In this review, we focus on the clinical utility of GAGs as biomarkers for mRCC (which is important for risk stratification and strategizing effective treatment protocols), as well as potential therapeutic targets that could benefit patients afflicted with advanced RCC. Besides GAG-targeted therapies that holds promise in mRCC, other potential strategies include utilizing GAGs as drug carriers and their mimetics to counter cancer progression, and enhance immunotherapy through binding and transducing signals for immune mediators.

Role of Oxidative Stress in Peyronie's Disease: Biochemical Evidence and Experiences of Treatment with Antioxidants

BACKGROUND

Peyronie's disease (PD) is a chronic inflammatory condition affecting adult males, involving the tunica albuginea of the corpora cavernosa of the penis. PD is frequently associated with penile pain, erectile dysfunction, and a secondary anxious-depressive state. The etiology of PD has not yet been completely elucidated, but local injury is generally recognized to be a triggering factor. It has also been widely proven that oxidative stress is an essential, decisive component in all inflammatory processes, whether acute or chronic. Current conservative medical treatment comprises oral substances, penile injections, and physical therapy.

AIM

This article intends to show how antioxidant therapy is able to interfere with the pathogenetic mechanisms of the disease.

METHOD

This article consists of a synthetic narrative review of the current scientific literature on antioxidant therapy for this disease.

RESULTS

The good results of the antioxidant treatment described above also prove that the doses used were adequate and the concentrations of the substances employed did not exceed the threshold at which they might have interacted negatively with the mechanisms of the redox regulation of tissue.

CONCLUSIONS

We believe new, randomized, controlled studies are needed to confirm the efficacy of treatment with antioxidants. However, we consider the experiences of antioxidant treatment which can already be found in the literature useful for the clinical practice of urologists in the treatment of this chronic inflammatory disease.

Polysaccharide-Based Nanomedicines Targeting Lung Cancer

A primary illness that accounts for a significant portion of fatalities worldwide is cancer. Among the main malignancies, lung cancer is recognised as the most chronic kind of cancer around the globe. Radiation treatment, surgery, and chemotherapy are some medical procedures used in the traditional care of lung cancer. However, these methods lack selectivity and damage nearby healthy cells. Several polysaccharide-based nanomaterials have been created to transport chemotherapeutics to reduce harmful and adverse side effects and improve response during anti-tumour reactions. To address these drawbacks, a class of naturally occurring polymers called polysaccharides have special physical, chemical, and biological characteristics. They can interact with the immune system to induce a better immunological response. Furthermore, because of the flexibility of their structures, it is possible to create multifunctional nanocomposites with excellent stability and bioavailability for the delivery of medicines to tumour tissues. This study seeks to present new views on the use of polysaccharide-based chemotherapeutics and to highlight current developments in polysaccharide-based nanomedicines for lung cancer.

The most promising microneedle device: present and future of hyaluronic acid microneedle patch

Microneedle patch (MNP) is an alternative to the oral route and subcutaneous injection with unique advantages such as painless administration, good compliance, and fewer side effects. Herein, we report MNP as a prominent strategy for drug delivery to treat local or systemic disease. Hyaluronic acid (HA) has advantageous properties, such as human autologous source, strong water absorption, biocompatibility, and viscoelasticity. Therefore, the Hyaluronic acid microneedle patch (HA MNP) occupies a large part of the MNP market. HA MNP is beneficial for wound healing, targeted therapy of certain specific diseases, extraction of interstitial skin fluid (ISF), and preservation of drugs. In this review, we summarize the benefits of HA and cross-linked HA (x-HA) as an MNP matrix. Then, we introduce the types of HA MNP, delivered substances, and drug distribution. Finally, we focus on the biomedical application of HA MNP as an excellent drug carrier in some specific diseases and the extraction and analysis of biomarkers. We also discuss the future development prospect of HA MNP in transdermal drug delivery systems (TDDS).

Natural polysaccharide-based biodegradable polymeric platforms for transdermal drug delivery system: a critical analysis

Natural biodegradable polymers generally include polysaccharides (starch, alginate, chitin/chitosan, hyaluronic acid derivatives, etc.) and proteins (collagen, gelatin, fibrin, etc.). In transdermal drug delivery systems (TDDS), these polymers play a vital role in controlling the device's drug release. It is possible that natural polymers can be used for TDDS to attain predetermined drug delivery rates due to their physicochemical properties. These polymers can be employed to market products and scale production because they are readily available and inexpensive. As a result of these polymers, new pharmaceutical delivery systems can be developed that is both regulated and targeted. The focus of this article is the application of a biodegradable polymeric platform based on natural polymers for TDDS. Due to their biocompatibility and biodegradability, natural biodegradable polymers are frequently used in biomedical applications. Additionally, these natural biodegradable polymers are being studied for their characteristics and behaviors.

Balsam Poplar Buds: Extraction of Potential Phenolic Compounds with Polyethylene Glycol Aqueous Solution, Thermal Sterilization of Extracts and Challenges to Their Application in Topical Ocular Formulations

Phenolic compounds of natural origin have been valued for their beneficial effects on health since ancient times. During our study, we performed the extraction of phenolic compounds from balsam poplar buds using different concentrations of aqueous polyethylene glycol 400 solvents (10-30% PEG400). The aqueous 30% PEG400 extract showed the best phenolic yield. The stability of the extract during autoclave sterilization was evaluated. The extract remained stable under heat sterilization. Ophthalmic formulations are formed using different concentrations (8-15%) of poloxamer 407 (P407) together with hydroxypropyl methylcellulose (0.3%), sodium carboxymethyl cellulose (0.3%) or hyaluronic acid (0.1%). Physicochemical parameters of the formulations remained significantly unchanged after sterilization. Formulations based on 12% P407 exhibited properties characteristic of in situ gels, the gelation point of the formulations was close to the temperature of the cornea. After evaluating the amount of released compounds, it was found that, as the concentration of polymers increases, the amount of released compounds decreases. Formulations based on 15% P407 released the least biologically active compounds. Sterilized formulations remained stable for 30 days.

3D-printed hyaluronic acid hydrogel scaffolds impregnated with neurotrophic factors (BDNF, GDNF) for post-traumatic brain tissue reconstruction

Brain tissue reconstruction posttraumatic injury remains a long-standing challenge in neurotransplantology, where a tissue-engineering construct (scaffold, SC) with specific biochemical properties is deemed the most essential building block. Such three-dimensional (3D) hydrogel scaffolds can be formed using brain-abundant endogenous hyaluronic acid modified with glycidyl methacrylate by employing our proprietary photopolymerisation technique. Herein, we produced 3D hyaluronic scaffolds impregnated with neurotrophic factors (BDNF, GDNF) possessing 600 kPa Young’s moduli and 336% swelling ratios. Stringent in vitro testing of fabricated scaffolds using primary hippocampal cultures revealed lack of significant cytotoxicity: the number of viable cells in the SC+BDNF (91.67 ± 1.08%) and SC+GDNF (88.69 ± 1.2%) groups was comparable to the sham values (p > 0.05). Interestingly, BDNF-loaded scaffolds promoted the stimulation of neuronal process outgrowth during the first 3 days of cultures development (day 1: 23.34 ± 1.46 µm; day 3: 37.26 ± 1.98 µm, p < 0.05, vs. sham), whereas GDNF-loaded scaffolds increased the functional activity of neuron-glial networks of cultures at later stages of cultivation (day 14) manifested in a 1.3-fold decrease in the duration coupled with a 2.4-fold increase in the frequency of Ca2+ oscillations (p < 0.05, vs. sham). In vivo studies were carried out using C57BL/6 mice with induced traumatic brain injury, followed by surgery augmented with scaffold implantation. We found positive dynamics of the morphological changes in the treated nerve tissue in the post-traumatic period, where the GDNF-loaded scaffolds indicated more favorable regenerative potential. In comparison with controls, the physiological state of the treated mice was improved manifested by the absence of severe neurological deficit, significant changes in motor and orienting-exploratory activity, and preservation of the ability to learn and retain long-term memory. Our results suggest in favor of biocompatibility of GDNF-loaded scaffolds, which provide a platform for personalized brain implants stimulating effective morphological and functional recovery of nerve tissue after traumatic brain injury.

Biomaterials and advanced technologies for the evaluation and treatment of ovarian aging

Ovarian aging is characterized by a progressive decline in ovarian function. With the increase in life expectancy worldwide, ovarian aging has gradually become a key health problem among women. Over the years, various strategies have been developed to preserve fertility in women, while there are currently no clinical treatments to delay ovarian aging. Recently, advances in biomaterials and technologies, such as three-dimensional (3D) printing and microfluidics for the encapsulation of follicles and nanoparticles as delivery systems for drugs, have shown potential to be translational strategies for ovarian aging. This review introduces the research progress on the mechanisms underlying ovarian aging, and summarizes the current state of biomaterials in the evaluation and treatment of ovarian aging, including safety, potential applications, future directions and difficulties in translation.

Hyaluronic Acid Modified Nanostructured Lipid Carrier for Targeting Delivery of Kaempferol to NSCLC: Preparation, Optimization, Characterization, and Performance Evaluation In Vitro

Lung cancer seriously threatens the health of human beings, with non-small cell lung cancer (NSCLC) accounting for 80%. Nowadays, the potential position of nano-delivery in treating cancer has been the subject of continuous research. The present research aimed to prepare two molecular weight hyaluronic acid (HA)-modified kaempferol (KA)-loaded nanostructured lipid carriers (HA-KA-NLCs) by the method of melting ultrasonic and electrostatic adsorption, and to assess the antitumor effect of the preparations on A549 cells. The characterization and safety evaluation of the preparations illustrated that they are acceptable for drug delivery for cancer. Subsequently, differential scanning calorimetry (DSC) curve and transmission electron microscopy (TEM) images indicated that the drug was adequately incorporated in the carrier, and the particle appeared as a sphere. Moreover, HA-KA-NLC showed predominant in vitro antitumor effects, inhibiting proliferation, migration, and invasion, promoting apoptosis and increasing cellular uptake of A549 cells. Otherwise, the Western blot assay revealed that preparations could activate epithelial-mesenchymal transition (EMT)-related signaling pathways and modulate the expression of E-cadherin, N-cadherin, and Vimentin in A549 cells. Our present findings demonstrated that HA-KA-NLC could be considered as a secure and effective carrier for targeted tumor delivery and may have potential application prospects in future clinic therapy of NSCLC.

Advances in Barrier Membranes for Guided Bone Regeneration Techniques

Guided bone regeneration (GBR) is a widely used technique for alveolar bone augmentation. Among all the principal elements, barrier membrane is recognized as the key to the success of GBR. Ideal barrier membrane should have satisfactory biological and mechanical properties. According to their composition, barrier membranes can be divided into polymer membranes and non-polymer membranes. Polymer barrier membranes have become a research hotspot not only because they can control the physical and chemical characteristics of the membranes by regulating the synthesis conditions but also because their prices are relatively low. Still now the bone augment effect of barrier membrane used in clinical practice is more dependent on the body’s own growth potential and the osteogenic effect is difficult to predict. Therefore, scholars have carried out many researches to explore new barrier membranes in order to improve the success rate of bone enhancement. The aim of this study is to collect and compare recent studies on optimizing barrier membranes. The characteristics and research progress of different types of barrier membranes were also discussed in detail.

Innovative Approach in the Cryogenic Freezing Medium for Mesenchymal Stem Cells

The physical stresses during cryopreservation affect stem cell survival and further proliferation. To minimize or prevent cryoinjury, cryoprotective agents (CPAs) are indispensable. Despite the widespread use of 10% dimethyl sulfoxide (DMSO), there are concerns about its potential adverse effects. To bypass those effects, combinations of CPAs have been investigated. This study aimed to verify whether high-molecular-hyaluronic acid (HMW-HA) serves as a cryoprotectant when preserving human mesenchymal stem cells (hMSCs) to reduce the DMSO concentration in the cryopreservation medium. We studied how 0.1% or 0.2% HMW-HA combined with reduced DMSO concentrations (from 10% to 5%, and 3%) affected total cell count, viability, immunophenotype, and differentiation potential post-cryopreservation. Immediately after cell revival, the highest total cell count was observed in 10% DMSO-stored hMSC. However, two weeks after cell cultivation an increased cell count was seen in the HMW-HA-stored groups along with a continued increase in hMSCs stored using 3% DMSO and 0.1% HMW-HA. The increased total cell count corresponded to elevated expression of stemness marker CD49f. The HA-supplemented cryomedium did not affect the differential potential of hMSC. Our results will participate in producing a ready-to-use product for cryopreservation of mesenchymal stem cells.

Polydopamine nanoparticles and hyaluronic acid hydrogels for mussel-inspired tissue adhesive nanocomposites

Bioadhesives are intended to facilitate the fast and efficient reconnection of tissues to restore their functionality after surgery or injury. The use of mussel-inspired hydrogel systems containing pendant catechol moieties is promising for tissue attachment under wet conditions. However, the adhesion strength is not yet ideal. One way to overcome these limitations is to add polymeric nanoparticles to create nanocomposites with improved adhesion characteristics. To further enhance adhesiveness, polydopamine nanoparticles with controlled size prepared using an optimized process, were combined with a mussel-inspired hyaluronic acid (HA) hydrogel to form a nanocomposite. The effects of sizes and concentrations of polydopamine nanoparticles on the adhesive profiles of mussel-inspired HA hydrogels were investigated. Results show that the inclusion of polydopamine nanoparticles in nanocomposites increased adhesion strength, as compared to the addition of poly (lactic-co-glycolic acid) (PLGA), and PLGA-(N-hydroxysuccinimide) (PLGA-NHS) nanoparticles. A nanocomposite with demonstrated cytocompatibility and an optimal lap shear strength (47 ± 3 kPa) was achieved by combining polydopamine nanoparticles of 200 nm (12.5% w/v) with a HA hydrogel (40% w/v). This nanocomposite adhesive shows its potential as a tissue glue for biomedical applications.

Hyaluronic Acid-Conjugated Carbon Nanomaterials for Enhanced Tumour Targeting Ability

Hyaluronic acid (HA) has been implemented for chemo and photothermal therapy to target tumour cells overexpressing the CD44+ receptor. HA-targeting hybrid systems allows carbon nanomaterial (CNM) carriers to efficiently deliver anticancer drugs, such as doxorubicin and gemcitabine, to the tumour sites. Carbon nanotubes (CNTs), graphene, graphene oxide (GO), and graphene quantum dots (GQDs) are grouped for a detailed review of the novel nanocomposites for cancer therapy. Some CNMs proved to be more successful than others in terms of stability and effectiveness at removing relative tumour volume. While the literature has been focused primarily on the CNTs and GO, other CNMs such as carbon nano-onions (CNOs) proved quite promising for targeted drug delivery using HA. Near-infrared laser photoablation is also reviewed as a primary method of cancer therapy-it can be used alone or in conjunction with chemotherapy to achieve promising chemo-photothermal therapy protocols. This review aims to give a background into HA and why it is a successful cancer-targeting component of current CNM-based drug delivery systems.

Hyaluronic acid-coated and Olaparib-loaded PEI - PLGA nanoparticles for the targeted therapy of triple negative breast cancer

AIM

To prepare the hyaluronic acid-coated Olaparib-loaded PEI - PLGA nanoparticles (HA-Ola-PPNPs) and investigate their tumour-targeted anticancer effect.

METHODS

The synthesis of HA-Ola-PPNPs was verified by DLS, TEM and SEM, followed was measured its cytotoxicity using CCK-8 assay. Confocal microscopy was used to observe the cellular uptake. Cell apoptosis was analysed by flow cytometry, biological SEM, and TEM. The expression of related proteins within the tumour site was investigated by immunostaining.

RESULTS

The prepared HA-Ola-PPNPs showed a diameter of ∼160 nm with a negatively charged surface (-16.9 ± 2.7 mV) and sustained drug release behaviour. And the encapsulation efficiency of HA-Ola-PPNPs was 78.63 ± 5.29%. HA-Ola-PPNPs exhibited efficient in vitro and in vivo antitumor activities. HA-Ola-PPNPs induced cell apoptosis by upregulating Bax, Cytochrome C, and Caspase 3, downregulating Bcl-2 in breast cancer-bearing mice.

CONCLUSIONS

According to the results, the Ola-loaded and HA-coated PEI - PLGA nanoparticles could be considered as a powerful tumour-targeted drug delivery system for TNBC treatment.

Progress of 3D Bioprinting in Organ Manufacturing

Three-dimensional (3D) bioprinting is a family of rapid prototyping technologies, which assemble biomaterials, including cells and bioactive agents, under the control of a computer-aided design model in a layer-by-layer fashion. It has great potential in organ manufacturing areas with the combination of biology, polymers, chemistry, engineering, medicine, and mechanics. At present, 3D bioprinting technologies can be used to successfully print living tissues and organs, including blood vessels, skin, bones, cartilage, kidney, heart, and liver. The unique advantages of 3D bioprinting technologies for organ manufacturing have improved the traditional medical level significantly. In this article, we summarize the latest research progress of polymers in bioartificial organ 3D printing areas. The important characteristics of the printable polymers and the typical 3D bioprinting technologies for several complex bioartificial organs, such as the heart, liver, nerve, and skin, are introduced.

Validation of an Analytical Method for the Simultaneous Determination of Hyaluronic Acid Concentration and Molecular Weight by Size-Exclusion Chromatography

The hyaluronic acid (HA) global market growth can be attributed to its use in medical, cosmetic, and pharmaceutical applications; thus, it is important to have validated, analytical methods to ensure confidence and security of its use (and to save time and resources). In this work, a size-exclusion chromatography method (HPLC-SEC) was validated to determine the concentration and molecular distribution of HA simultaneously. Analytical curves were developed for concentration and molecular weight in the ranges of 100-1000 mg/L and 0.011-2.200 MDa, respectively. The HPLC-SEC method showed repeatability and reproducibility greater than 98% and limits of detection and quantification of 12 and 42 mg/L, respectively, and was successfully applied to the analysis of HA from a bacterial culture, as well as cosmetic, and pharmaceutical products.

Hyaluronic acid based microneedle array: Recent applications in drug delivery and cosmetology

Microneedles are micron-sized arrays of needles that facilitate drug delivery for local and systemic effects. Hyaluronic acid (HA) is a glycosaminoglycan and is an indigenous component of the connective tissues and dermis. Owing to its versatility and biocompatibility, it has widely been used against various bone, eye, and skin disorders. Therefore, fabricating HA-microneedles is fetching massive global attention. HA based dissolvable microneedles have been immensely explored due to their biodegradable nature. Its degradation residues are very safe. Several attempts have been made to deliver vitamins, proteins, DNAs, and biological macromolecules by HA-microneedles. Here we present the recent advancements in HA-microneedles based application on drug delivery and cosmetology. Its bio-degradation pathways, the receptors on which HA and its derivatives interact, the biological half-lives, and their importance as useful materials for various applications are highlighted. The literature reports identify HA-microneedle as an useful carrier for the delivery of pharmaceuticals.

Primary recovery of hyaluronic acid produced in Streptococcus equi subsp. zooepidemicus using PEG-citrate aqueous two-phase systems

Given its biocompatibility, rheological, and physiological properties, hyaluronic acid (HA) has become a biomaterial of increasing interest with multiple applications in medicine and cosmetics. In recent decades, microbial fermentations have become an important source for the industrial production of HA. However, due to its final applications, microbial HA must undergo critical and long purification processes to ensure clinical and cosmetic grade purity. Aqueous two-phase systems (ATPS) have proven to be an efficient technique for the primary recovery of high-value biomolecules. Nevertheless, their implementation in HA downstream processing has been practically unexplored. In this work, polyethylene glycol (PEG)–citrate ATPS were used for the first time for the primary recovery of HA produced with an engineered strain of Streptococcus equi subsp. zooepidemicus. The effects of PEG molecular weight (MW), tie-line length (TLL), volume ratio (V_R), and sample load on HA recovery and purity were studied with a clarified fermentation broth as feed material. HA was recovered in the salt-rich bottom phase, and its recovery increased when a PEG MW of 8000 g mol⁻¹ was used. Lower V_R values (0.38) favoured HA recovery, whereas purity was enhanced by a high V_R (3.50). Meanwhile, sample load had a negative impact on both recovery and purity. The ATPS with the best performance was PEG 8000 g mol⁻¹, TLL 43% (w/w), and V_R 3.50, showing 79.4% HA recovery and 74.5% purity. This study demonstrated for the first time the potential of PEG–citrate ATPS as an effective primary recovery strategy for the downstream process of microbial HA.

Bioluminescence Imaging of Matrix Metalloproteinases-2 and -9 Activities in Ethanol-injured Cornea of Mice

BACKGROUND/AIM

This study aimed to investigate the usefulness of in vivo bioluminescence imaging (BLI) to examine the role of matrix metalloproteinases (MMP)-2 and MMP-9 activation in the development and healing of ethanol-induced damage in the cornea of mice.

MATERIALS AND METHODS

Mouse corneal injury was induced by topical treatment with 20% ethanol. BLI was obtained from the ocular region of mice intravenously injected with an active-MMP-2/9 probe. In vivo results were validated in primary corneal epithelial cells.

RESULTS

BLI indicated that treatment of the eye with 20% ethanol elevated MMP-2/9 activity, which was inhibited by the application of eye drops (hyaluronic acid and serum). Treatment of corneal epithelial cells with 20% ethanol-increased the activities of MMP-2 and MMP-9, which were also inhibited by eye drops.

CONCLUSION

BLI can be applied in vivo in mice with corneal injury to examine the activity of MMPs and clarify the efficacy of eye drops.

Characterization of a Hyaluronic Acid Utilization Locus and Identification of Two Hyaluronate Lyases in a Marine Bacterium Vibrio alginolyticus LWW-9

Hyaluronic acid (HA) is a negatively charged and linear polysaccharide existing in the tissues and body fluids of all vertebrates. Some pathogenic bacteria target hyaluronic acid for adhesion and/or infection to host cells. Vibrio alginolyticus is an opportunistic pathogen related to infections of humans and marine animals, and the hyaluronic acid-degrading potential of Vibrio spp. has been well-demonstrated. However, little is known about how Vibrio spp. utilize hyaluronic acid. In this study, a marine bacterium V. alginolyticus LWW-9 capable of degrading hyaluronic acid has been isolated. Genetic and bioinformatic analysis showed that V. alginolyticus LWW-9 harbors a gene cluster involved in the degradation, transport, and metabolism of hyaluronic acid. Two novel PL8 family hyaluronate lyases, VaHly8A and VaHly8B, are the key enzymes for the degradation of hyaluronic acid. VaHly8A and VaHly8B have distinct biochemical properties, reflecting the adaptation of the strain to the changing parameters of the aquatic habitats and hosts. Based on genomic and functional analysis, we propose a model for the complete degradation of hyaluronic acid by V. alginolyticus LWW-9. Overall, our study expands our knowledge of the HA utilization paradigm within the Proteobacteria, and the two novel hyaluronate lyases are excellent candidates for industrial applications.

A pH-sensitive drug delivery system based on hyaluronic acid co-deliver doxorubicin and aminoferrocene for the combined application of chemotherapy and chemodynamic therapy

Doxorubicin is a broad-spectrum antineoplastic drug used in tumor therapy, its clinical application is limited by side effects on normal tissues. In this article, a pH-responsive drug delivery system (NPs(DOX/AFc)) with co-delivers doxorubicin (DOX) and aminoferrocene (AFc) was prepared by a two-step synthesis method including the oxidation of hyaluronic acid and Schiff base reaction. NPs(DOX/AFc) can be used in combination therapy of chemodynamic therapy (CDT) and chemotherapy (CT), thus the dosage of the chemotherapeutic drug DOX was reduced. The drug release behavior of NPs(DOX/AFc) in vitro showed that acid-responsive drug releases under the endosomal/lysosomal environment were 56.5 % of DOX and 61.8 % of AFc. In vitro toxicity experiments showed that DOX and AFc had synergistic effects (CI = 0.878). The results of intracellular ROS measurement and the mitochondrial membrane potential analysis showed that in tumor cells NPs(DOX₄/AFc) induced more production of reactive oxygen species and more loss of the mitochondrial membrane potential. In short, this co-delivery system based on polymer prodrugs provides a new idea for the combined application of CT and CDT.

Comparing Intra-articular Injections of Leukocyte-Poor Platelet-Rich Plasma Versus Low-Molecular Weight Hyaluronic Acid for the Treatment of Symptomatic Osteoarthritis of the Hip: A Double-Blind, Randomized Pilot Study

Background:

Hyaluronic acid (HA) and leukocyte-poor platelet-rich plasma (LP-PRP) are 2 nonoperative treatment options that have been studied in patients with hip osteoarthritis (OA).

Purpose:

To compare the efficacy of intra-articular injections of low–molecular weight (LMW) HA and LP-PRP in patients with hip OA.

Study Design:

Randomized controlled trial; Level of evidence, 1.

Methods:

A total of 34 patients (36 hips) presenting with signs of hip OA were randomized to receive 3 blinded, weekly intra-articular injections of either LP-PRP or LMW-HA. Patients were prospectively evaluated before injections and at 6 weeks and then at 3, 6, 12, and 24 months. The primary outcome, conversion to total hip arthroplasty (THA) or a hip resurfacing procedure, was analyzed along with secondary outcomes including the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score and hip range of motion.

Results:

The final analysis included 33 hips (mean Kellgren-Lawrence grade, 2.73) (LMW-HA: n = 14; LP-PRP: n = 19) in 31 patients (18 male; mean age, 53.8 years). Significantly more patients converted to THA or a hip resurfacing procedure in the LMW-HA group (7/14; 50.0%) (mean, 1.3 years after first injection) than the LP-PRP group (3/19; 15.8%) (mean, 0.73 years after first injection) (P = .035). There was no significant improvement or decline in any outcome scores within the LMW-HA group from before injections to 6 weeks or 3, 6, and 12 months. For the LP-PRP group, WOMAC overall (P = .032), joint (P = .030), and function scores (P = .025) significantly improved from before injections to 6 weeks, and WOMAC joint scores significantly improved from before injections to 6 months (P = .036). When comparing the difference between groups in internal rotation at 90° of hip flexion from before injections to 6 months, the LP-PRP group demonstrated a mean 5.0° improvement, while the LMW-HA group showed a mean 1.5° decrease (P = .028).

Conclusion:

Intra-articular hip injections of LP-PRP in patients with hip OA resulted in an improvement in WOMAC scores and hip internal rotation at 6 months and delayed the need for THA or a hip resurfacing procedure compared with treatment with LMW-HA. A longer follow-up is necessary to further compare the effects of LP-PRP and LMW-HA injections in patients with hip OA.

Registration:

NCT01920152 (ClinicalTrials.gov identifier).

Hyaluronic Acid Improves Hydrogen Peroxide Modulatory Effects on Calcium Channel and Sodium-Potassium Pump in 4T1 Breast Cancer Cell Line

Maintaining homeostasis of ion concentrations is critical in cancer cells. Under hypoxia, the levels of channels and pumps in cancer cells are more active than normal cells suggesting ion channels as a suitable therapeutic target. One of the contemporary ways for cancer therapy is oxidative stress. However, the effective concentration of oxidative stress on tumor cells has been reported to be toxic for normal cells as well. In this study, we benefited from the modifying effects of hyaluronic acid (HA) on H2O2, as a free radical source, to make a gradual release of oxidative stress on cancer cells while preventing/decreasing damage to normal cells under normoxia and hypoxic conditions. To do so, we initially investigated the optimal concentration of HA antioxidant capacity by the DPPH test. In the next step, we found optimum H2O2 dose by treating the 4T1 breast cancer cell line with increasing concentrations (0, 10, 20, 50,100, 200, 500, and 1000 μM) of H2O2 alone or H2O2 + HA (83%) for 24 hrs. The calcium channel and the sodium-potassium pumps were then evaluated by measuring the levels of calcium, sodium, and potassium ions using an atomic absorption flame spectrophotometer. The results revealed that treatment with H2O2 or H2O2+ HA led to an intracellular increase of calcium, sodium, and potassium in the normoxic and hypoxic circumstances in a dose-dependent manner. It is noteworthy that H2O2 + HA treatment had more favorable and controllable effects compared with H2O2 alone. Moreover, HA optimizes the antitumor effect of oxidative stress exerted by H2O2 making H2O2 + HA suitable for clinical use in cancer treatment along with chemotherapy.

Nonvascular Complications of Injectable Fillers-Prevention and Management

Injectable filler treatments have increased in popularity because of enhanced safety profile and improved physical characteristics. ISAPS (International Society of Plastic Surgery) put out global data showing 3.7 million hyaluronic acid (HA) filler procedures in 2018, making it the second most often performed procedure in the world, after botulinum toxin. And these are only ‘those’ performed by qualified plastic surgeons. There was a concomitant increase in both the nonvascular and vascular complications, which coincided with the number and type of filler procedures performed. Filler complications were reviewed from existing literature, and an attempt was made to understand etiology, elucidate clinical features, and clarify optimum treatment strategies for each. Complications can be early or delayed in presentation, early consisting of injection site complications like bruising, edema, and hypersensitivity, Tyndall effect, and intravascular injection. Delayed complications included hypersensitivity type IV, acute infections like cellulitis, abscesses, and herpes and delayed ones like granulomas, biofilms, and atypical mycobacterial infections. These were analyzed and treatment options, protocols, and consensus guidelines were suggested. A clear understanding of facial anatomy, physical characteristics of all fillers used, early recognition, and treatment options of complications will ensure optimum outcomes.

Comparative Evaluation of Two Hyaluronic Acid Gel Products for the Treatment of Interdental Papillary Defects

Objectives

The aim was to investigate the efficacy of single injections of two different hyaluronic acid products, Flex Barrier and Revident, in reducing the size of black triangles to treat Nordland-Tarnow Class I and II recessions.

Materials and Methods

Forty adult patients were recruited with at least two upper and two lower interdental papilla defects in the front region between canine teeth. According to the Nordland-Tarnow classification of papillary defects, both Class I and Class II recessions were included in the investigation. Patients were randomly assigned to experimental groups to receive single injections of two different hyaluronic acid products, either Flex Barrier or Revident. The untreated sites served as controls. Photographs were taken before and immediately after the treatment, and again after one week and one month. To determine the size of the black triangles, Image J software was used. For statistical analysis, a mixed-design ANOVA was applied.

Results

Both Flex Barrier and Revident significantly decreased the size of the treated defects immediately after the treatment and also one week later (p<0.001). The beneficial effect of Revident lasted longer than Flex Barrier as it remained significant even after one month in Revident-treated patients, however, not in the Flex Barrier-treated group. Furthermore, Nordland-Tarnow Class I lesions generally showed a greater improvement than Class II lesions.

Conclusion

In this proof-of-concept, randomized clinical trial we have demonstrated the clinical applicability of both Flex Barrier and Revident, although Revident gave longer-lasting improvements than Flex Barrier. Further trials are needed to optimize multiple-application protocols for treating gingival black triangles.