Functional RNA microarrays for high-throughput screening of antiprotein aptamers

Improving synthesis and binding affinities of nucleic acid aptamers and their therapeutics and diagnostic applications

Nucleic acid aptamers have captivated the attention of analytical and medicinal scientists globally due to their several advantages as recognition molecules over conventional antibodies because of their small size, simple and inexpensive synthesis, broad target range, and high stability in varied environmental conditions. These recognition molecules can be chemically modified to make them resistant to nuclease action in blood serum, reduce rapid renel clearance, improve the target affinity and selectivity, and make them amenable to chemically conjugate with a support system that facilitates their selective applications. This review focuses on the development of efficient aptamer candidates and their application in clinical diagnosis and therapeutic applications. Significant advances have been made in aptamer-based diagnosis of infectious and non-infectious diseases. Collaterally, the progress made in therapeutic applications of aptamers is encouraging, as evident from their use in diagnosing cancer, neurodegenerative diseases, microbial infection, and in imaging. This review also updates the progress on clinical trials of many aptamer-based products of commercial interests. The key development and critical issues on the subject have been summarized in the concluding remarks.

Spotting, Transcription and In Situ Synthesis: Three Routes for the Fabrication of RNA Microarrays

DNA microarrays have become commonplace in the last two decades, but the synthesis of other nucleic acids biochips, most importantly RNA, has only recently been developed to a similar extent. RNA microarrays can be seen as organized surfaces displaying a potentially very large number of unique sequences and are of invaluable help in understanding the complexity of RNA structure and function as they allow the probing and treatment of each of the many different sequences simultaneously. Three approaches have emerged for the fabrication of RNA microarrays. The earliest examples used a direct, manual or mechanical, deposition of pre-synthesized, purified RNA oligonucleotides onto the surface in a process called spotting. In a second approach, pre-spotted or in situ-synthesized DNA microarrays are employed as templates for the transcription of RNA, subsequently or immediately captured on the surface. Finally, a third approach attempts to mirror the phosphoramidite-based protocols for in situ synthesis of high-density DNA arrays in order to produce in situ synthesized RNA microarrays. In this mini-review, we describe the chemistry and the engineering behind the fabrications methods, underlining the advantages and shortcomings of each, and illustrate how versatile these platforms can be by presenting some of their applications.

Evaluation of protein-ligand interactions using the luminescent interaction assay FlimPIA with streptavidin-biotin linkage

Post-translational modifications, such as phosphorylation, are crucial in the regulation of protein-protein interactions and protein function in cell signaling. Here, we studied the interaction between the transactivation domain peptide of cancer suppressor protein p53 and its negative regulator Mdm2 using a novel protein-protein interaction assay, based on the modified FlimPIA using the streptavidin-biotin interaction to link the p53 peptide and the probe enzyme. We succeeded in detecting an attenuation in the affinity of p53 towards Mdm2 caused by the phosphorylation at Thr18. It showed that the targets, which are not easy to fuse with the FlimPIA probes, such as phosphorylated peptides can be used in this system. Also, the use of streptavidin nanobeads was found effective to get clearer signal, probably due to concentration of the detection system onto the bead surface. The system was further applied to the detection of FKBP-FRB interaction using biotinylated FKBP domain, which suggested another potential merit of this system that allows to avoid misfolding and steric hindrance often observed for the fusion protein approach.

SELEX methods on the road to protein targeting with nucleic acid aptamers

Systematic evolution of ligand by exponential enrichment (SELEX) is an efficient method used to isolate high-affinity single stranded oligonucleotides from a large random sequence pool. These SELEX-derived oligonucleotides named aptamer, can be selected against a broad spectrum of target molecules including proteins, cells, microorganisms and chemical compounds. Like antibodies, aptamers have a great potential in interacting with and binding to their targets through structural recognition and are therefore called "chemical antibodies". However, aptamers offer advantages over antibodies including smaller size, better tissue penetration, higher thermal stability, lower immunogenicity, easier production, lower cost of synthesis and facilitated conjugation or modification with different functional moieties. Thus, aptamers represent an attractive substitution for protein antibodies in the fields of biomarker discovery, diagnosis, imaging and targeted therapy. Enormous interest in aptamer technology triggered the development of SELEX that has underwent numerous modifications since its introduction in 1990. This review will discuss the recent advances in SELEX methods and their advantages and limitations. Aptamer applications are also briefly outlined in this review.

Challenges with osmolytes as inhibitors of protein aggregation: Can nucleic acid aptamers provide an answer?

Protein aggregation follows some common motifs. Whether in the formation of inclusion bodies in heterologous overexpression systems or inclusions in protein conformational diseases, or aggregation during storage or transport of protein formulations, aggregates form cross beta-sheet structures and stain with amyloidophilic dyes like Thioflavin T and Congo Red, irrespective of the concerned protein. Traditionally, osmolytes are used to stabilize proteins against stress conditions. They are employed right from protein expression, through production and purification, to formulation and administration. As osmolytes interact with the solvent, the differential effect of the stress condition on the solvent mostly determines the effect of the osmolyte on protein stability. Nucleic acid aptamers, on the other hand, are highly specific for their targets. When selected against monomeric, natively folded proteins, they bind to them with very high affinity. This binding inhibits the unfolding of the protein and/or monomer-monomer interaction which are the initial common steps of protein aggregation. Thus, by changing the approach to a protein-centric model, aptamers are able to function as universal stabilizers of proteins. The review discusses cases where osmolytes were unable to provide stabilization to proteins against different stress conditions, a gap which the aptamers seem to be able to fill.

Microarrays as Model Biosensor Platforms to Investigate the Structure and Affinity of Aptamers

Immobilization of nucleic acid aptamer recognition elements selected free in solution onto the surface of biosensor platforms has proven challenging. This study investigated the binding of multiple aptamer/target pairs immobilized on a commercially available microarray as a model system mimicking biosensor applications. The results indicate a minimum distance (linker length) from the surface and thymine nucleobase linker provides reproducible binding across varying conditions. An indirect labeling method, where the target was labeled with a biotin followed by a brief Cy3-streptavidin incubation, provided a higher signal-to-noise ratio and over two orders of magnitude improvement in limit of detection, compared to direct Cy3-protein labeling. We also showed that the affinities of the aptamer/target interaction can change between direct and indirect labeling and conditions to optimize for the highest fluorescence intensity will increase the sensitivity of the assay but will not change the overall affinity. Additionally, some sequences which did not initially bind demonstrated binding when conditions were optimized. These results, in combination with studies demonstrating enhanced binding in nonselection buffers, provided insights into the structure and affinity of aptamers critical for biosensor applications and allowed for generalizations in starting conditions for researchers wishing to investigate aptamers on a microarray surface.

In silico selection of an aptamer to estrogen receptor alpha using computational docking employing estrogen response elements as aptamer-alike molecules

Aptamers, the chemical-antibody substitute to conventional antibodies, are primarily discovered through SELEX technology involving multi-round selections and enrichment. Circumventing conventional methodology, here we report an in silico selection of aptamers to estrogen receptor alpha (ERα) using RNA analogs of human estrogen response elements (EREs). The inverted repeat nature of ERE and the ability to form stable hairpins were used as criteria to obtain aptamer-alike sequences. Near-native RNA analogs of selected single stranded EREs were modelled and their likelihood to emerge as ERα aptamer was examined using AutoDock Vina, HADDOCK and PatchDock docking. These in silico predictions were validated by measuring the thermodynamic parameters of ERα -RNA interactions using isothermal titration calorimetry. Based on the in silico and in vitro results, we selected a candidate RNA (ERaptR4; 5′-GGGGUCAAGGUGACCCC-3′) having a binding constant (Ka) of 1.02 ± 0.1 × 10⁸M⁻¹ as an ERα-aptamer. Target-specificity of the selected ERaptR4 aptamer was confirmed through cytochemistry and solid-phase immunoassays. Furthermore, stability analyses identified ERaptR4 resistant to serum and RNase A degradation in presence of ERα. Taken together, an efficient ERα-RNA aptamer is identified using a non-SELEX procedure of aptamer selection. The high-affinity and specificity can be utilized in detection of ERα in breast cancer and related diseases.

High efficiency acetylcholinesterase immobilization on DNA aptamer modified surfaces

We report here the in vitro selection of DNA aptamers for electric eel acetylcholinesterase (AChE). One selected aptamer sequence (R15/19) has a high affinity towards the enzyme (Kd=157±42 pM). Characterization of the aptamer showed its binding is not affected by low ionic strength (~20 mM), however significant reduction in affinity occurred at high ionic strength (~1.2 M). In addition, this aptamer does not inhibit the catalytic activity of AChE that we exploit through immobilization of the DNA on a streptavidin-coated surface. Subsequent immobilization of AChE by the aptamer results in a 4-fold higher catalytic activity when compared to adsorption directly on to plastic.

Advances in methods for native expression and purification of RNA for structural studies

Many RNAs present unique challenges in obtaining material suitable for structural or biophysical characterization. These issues include synthesis of chemically and conformationally homogeneous RNAs, refolding RNA purified using denaturing preparation techniques, and avoiding chemical damage. To address these challenges, new methodologies in RNA expression and purification have been developed seeking to emulate those commonly used for proteins. In this review, recent developments in the preparation of high-quality RNA for structural biology and biophysical applications are discussed, with an emphasis on native methods.

Multiplex approaches in protein microarray technology

The success of genome sequencing projects has provided the basis for systematic analysis of protein function and has led to a shift from the description of single molecules to the characterization of complex samples. Such a task would not be possible without the provision of appropriate high-throughput technologies, such as protein microarray technology. In addition, the increasing number of samples necessitates the adaptation of such technologies to a multiplex format. This review will discuss protein microarray technology in the context of multiplex analysis and highlight its current prospects and limitations.

Isolating single stranded DNA using a microfluidic dialysis device

Isolating a particular strand of DNA from a double stranded DNA duplex is an important step in aptamer generation as well as many other biotechnology applications. Here we describe a microfluidic, flow-through, dialysis device for isolating single-stranded DNA (ssDNA) from double-stranded DNA (dsDNA). The device consists of two channels fabricated in polydimethylsiloxane (PDMS) separated by a track etched polycarbonate membrane (800 nm pore size). To isolate ssDNA, dual-biotin labelled dsDNA was immobilized onto streptavidin-coated polystyrene beads. Alkaline treatment was used to denature dsDNA, releasing the non-biotinylated ssDNA. In the flow-through dialysis device the liberated ssDNA was able to cross the membrane and was collected in an outlet channel. The complementary sequence bound to the bead was unable to cross the membrane and was directed to a waste channel. The effect of NaOH concentration and flow rate on purity and yield were compared. >95% ssDNA purity was achieved at 25 mM NaOH. However, lower flow rates were necessary to achieve ssDNA yields approaching the 50% theoretical maximum of the concurrent-flow device. Under optimized conditions the microfluidic isolation achieved even higher purity ssDNA than analogous manual procedures.

Portable two-way riboswitches: design and engineering

Riboswitches are RNA-based regulatory devices that mediate ligand-dependent control of gene expression. However, there has been limited success in rationally designing riboswitches. Moreover, most previous riboswitches are confined to a particular gene and only perform one-way regulation. Here, we describe a library screening strategy for efficient creation of ON riboswitches of lacI of Escherichia coli. An ON riboswitch of lacI is then integrated with the lac promoter, generating a hybrid device to achieve portable sequential OFF-and-ON gene regulation.

Optimized light-directed synthesis of aptamer microarrays

Aptamer microarrays are a promising high-throughput method for ultrasensitive detection of multiple analytes, but although much is known about the optimal synthesis of oligonucleotide microarrays used in hybridization-based genomics applications, the bioaffinity interactions between aptamers and their targets is qualitatively different and requires significant changes to synthesis parameters. Focusing on streptavidin-binding DNA aptamers, we employed light-directed in situ synthesis of microarrays to analyze the effects of sequence fidelity, linker length, surface probe density, and substrate functionalization on detection sensitivity. Direct comparison with oligonucleotide hybridization experiments indicates that aptamer microarrays are significantly more sensitive to sequence fidelity and substrate functionalization and have different optimal linker length and surface probe density requirements. Whereas microarray hybridization probes generate maximum signal with multiple deletions, aptamer sequences with the same deletion rate result in a 3-fold binding signal reduction compared with the same sequences synthesized for maximized sequence fidelity. The highest hybridization signal was obtained with dT 5mer linkers, and the highest aptamer signal was obtained with dT 11mers, with shorter aptamer linkers significantly reducing the binding signal. The probe hybridization signal was found to be more sensitive to molecular crowding, whereas the aptamer probe signal does not appear to be constrained within the density of functional surface groups commonly used to synthesize microarrays.

Aptamers: molecules of great potential

Aptamers emerged over 20 years ago as a class of nucleic acids able to recognize specific targets. Today, aptamer-related studies constitute a large and important field of biotechnology. Functional oligonucleotides have proved to be a versatile tool in biomedical research due to the ease of synthesis, a wide range of potentially recognized molecular targets and the simplicity of selection. Similarly to antibodies, aptamers can be used to detect or isolate specific molecules, as well as to act as targeting and therapeutic agents. In this review we present different approaches to aptamer application in nanobiotechnology, diagnostics and medicine.

Strategies for the discovery of therapeutic aptamers

IMPORTANCE OF THE FIELD

Therapeutic aptamers are synthetic, structured oligonucleotides that bind to a very broad range of targets with high affinity and specificity. They are an emerging class of targeting ligand that show great promise for treating a number of diseases. A series of aptamers currently in various stages of clinical development highlights the potential of aptamers for therapeutic applications.

AREAS COVERED IN THIS REVIEW

This review covers in vitro selection of oligonucleotide ligands, called aptamers, from a combinatorial library using the Systematic Evolution of Ligands by Exponential Enrichment process as well as the other known strategies for finding aptamers against various targets.

WHAT THE READER WILL GAIN

Readers will gain an understanding of the highly useful strategies for successful aptamer discovery. They may also be able to combine two or more of the presented strategies for their aptamer discovery projects.

TAKE HOME MESSAGE

Although many processes are available for discovering aptamers, it is not easy to discover an aptamer candidate that is ready to move toward pharmaceutical drug development. It is also apparent that there have been relatively few therapeutic advances and clinical trials undertaken due to the small number of companies that participate in aptamer development.

Engineering a portable riboswitch-LacP hybrid device for two-way gene regulation

Riboswitches are RNA-based regulatory devices that mediate ligand-dependent control of gene expression. However, there has been limited success in rationally designing riboswitches. Moreover, most previous riboswitches are confined to a particular gene and only perform one-way regulation. Here, we used a library screening strategy for efficient creation of ON and OFF riboswitches of lacI on the chromosome of Escherichia coli. We then engineered a riboswitch-LacP hybrid device to achieve portable gene control in response to theophylline and IPTG. Moreover, this device regulated target expression in a ‘two-way’ manner: the default state of target expression was ON; the expression was switched off by adding theophylline and restored to the ON state by adding IPTG without changing growth medium. We showcased the portability and two-way regulation of this device by applying it to the small RNA CsrB and the RpoS protein. Finally, the use of the hybrid device uncovered an inhibitory role of RpoS in acetate assimilation, a function which is otherwise neglected using conventional genetic approaches. Overall, this work establishes a portable riboswitch-LacP device that achieves sequential OFF-and-ON gene regulation. The two-way control of gene expression has various potential scientific and biotechnological applications and helps reveal novel gene functions.

RNAs synthesized using photocleavable biotinylated nucleotides have dramatically improved catalytic efficiency

Obtaining homogeneous population of natively folded RNAs is a crippling problem encountered when preparing RNAs for structural or enzymatic studies. Most of the traditional methods that are employed to prepare large quantities of RNAs involve procedures that partially denature the RNA. Here, we present a simple strategy using ‘click’ chemistry to couple biotin to a ‘caged’ photocleavable (PC) guanosine monophosphate (GMP) in high yield. This biotin-PC GMP, accepted by T7 RNA polymerase, has been used to transcribe RNAs ranging in size from 27 to 527 nt. Furthermore we show, using an in-gel fluorescence assay, that natively prepared 160 and 175 kDa minimal group II intron ribozymes have enhanced catalytic activity over the same RNAs, purified via denaturing conditions and refolded. We conclude that large complex RNAs prepared by non-denaturing means form a homogeneous population and are catalytically more active than those prepared by denaturing methods and subsequent refolding; this facile approach for native RNA preparation should benefit synthesis of RNAs for biophysical and therapeutic applications.

Optical detection systems using immobilized aptamers

Advances in the development and the applications of optical biosensing systems based on immobilized aptamers are presented. These nucleic acid sequences have been used as new molecular recognition elements to develop heterogeneous assays, biosensors and microarrays. Among different detection modes that have been employed, optical ones which are described here are among the most used. Since their first report in 1996, numerous optical detection systems using aptamers and mainly based on fluorescence have been developed. Two main approaches have been used: label-based (using fluorophore, luminophore, enzyme, nanoparticles) or aptamer label-free detection systems (e.g. surface plasmon resonance, optical resonance). Most methods are based on a labeling approach. Some targets can be optically detected using not only colorimetry, chemiluminescence or the most developed fluorescence mode but also more recent non conventional optical methods such as surface plasmon-coupled directional emission (SPCDE). The first SPCDE-based aptasensor for thrombin detection has recently been reported in 2009. Aptasensors based on surface-enhanced Raman scattering spectroscopy (SERS) which presents advantages compared to fluorescence have also been described. Different label-free techniques have recently been shown to be suitable for developing performant aptasensors or aptamer-based microarrays, such as surface plasmon resonance (SPR), diffraction grating, evanescent-field-coupled (EFC) waveguide-mode, optical resonance or Brewster angle straddle interferometry (BASI). Important advances have been realized on optical aptamer-based detection systems that appear as highly efficient devices with enormous potential.

Aptamer arrays

In less than 40 years, aptamers have consolidated their role in biosensor development. Chemically related to nucleic acid probes, production of aptamers against targets of various sizes and compositions places them as ideal capture elements, alternative to more consolidated molecules such as antibodies. Thanks to their chemical simplicity and production, as well as their unique characteristics, aptamers have been successfully integrated in several innovative approaches. The incorporation of aptamers into the existing microarray technologies has lead to the reporting of various detection strategies, including direct fluorescence detection of fluorescent reporters, fluorescence anisotropy, FRET, SPR imaging, and electrochemical detection.

Recombinant antibodies for the generation of antibody arrays

Affinity proteomics, mainly represented by antibody microarrays, has in recent years been established as a powerful tool for high-throughput (disease) proteomics. The technology can be used to generate detailed protein expression profiles, or protein maps, of focused set of proteins in crude proteomes and potentially even high-resolution portraits of entire proteomes. The technology provides unique opportunities, for example biomarker discovery, disease diagnostics, patient stratification and monitoring of disease, and taking the next steps toward personalized medicine. However, the process of designing high-performing, high-density antibody micro- and nanoarrays has proven to be challenging, requiring truly cross-disciplinary efforts to be adopted. In this mini-review, we address one of these key technological issues, namely, the choice of probe format, and focus on the use of recombinant antibodies vs. polyclonal and monoclonal antibodies for the generation of antibody arrays.

Biosensors and nanomaterials and their application for mycotoxin determination

Mycotoxin analysis and detection in food and drinks is vital for ensuring food quality and safety, eliminating and controlling the risk of consuming contaminated foods, and complying with the legislative limits set by food authorities worldwide. Most analysis of these toxins is still conducted using conventional methods; however, biosensor methods are currently being developed as screening tools for use in field analysis. Biosensors have demonstrated their ability to provide rapid, sensitive, robust and cost-effective quantitative methods for on-site testing. The development of biosensor devices for different mycotoxins has attracted much research interest in recent years with a range of devices being designed and reported in the scientific literature. However, with the advent of nanotechnology and its impact on the evolution of ultrasensitive devices, mycotoxin analysis is also benefiting from the advances taking place in applying nanomaterials in sensors development. This paper reviews the developments in the area of biosensors and their applications for mycotoxin analysis, as well as the development of micro/nanoarray transducers and nanoparticles and their use in the development of new rapid devices.

ADLOC: an aptamer-displacement assay based on luminescent oxygen channeling

Functional nucleic acids, such as aptamers and allosteric ribozymes, can sense their ligands specifically, thereby undergoing structural alterations that can be converted into a detectable signal. The direct coupling of molecular recognition to signal generation enables the production of versatile reporters that can be applied as molecular probes for various purposes, including high-throughput screening. Here we describe an unprecedented type of a nucleic acid-based sensor system and show that it is amenable to high-throughput screening (HTS) applications. The approach detects the displacement of an aptamer from its bound protein partner by means of luminescent oxygen channeling. In a proof-of-principle study we demonstrate that the format is feasible for efficient identification of small drug-like molecules that bind to a protein target, in this case to the Sec7 domain of cytohesin. We extended the approach to a new cytohesin-specific single chain DNA aptamer, C10.41, which exhibits a similar binding behavior to cytohesins but has the advantage of being more stable and easier to synthesize and to modify than the RNA-aptamer M69. The results obtained with both aptamers indicate the general suitability of the aptamer-displacement assay based on luminescent oxygen channelling (ADLOC) for HTS. We also analyzed the potential for false positive hits and identified from a library of 18,000 drug-like small molecules two compounds as strong singlet-oxygen quenchers. With full automation and the use of commercially available plate readers, we estimate that the ADLOC-based assay described here could be used to screen at least 100,000 compounds per day.

Enhancement of aptamer microarray sensitivity through spacer optimization and avidity effect

This work aims for ultrasensitive detection of target proteins in complex biological matrixes based on aptamer microarrays. Two extensively studied aptamers (HTQ and HTDQ) that bind distinct epitopes of thrombin are chosen for the microarray study. Although HTQ and HTDQ have nanomolar to subnanomolar affinities, it is found that either aptamer when applied directly has difficulty in detecting a few nanomoles per liter thrombin in the presence of a 10- or 100-fold (w/w) excess of serum total protein (STP). By investigating dodecyl (12-carbon) and oligodeoxythymidine (oligo(dT)) spacers, we observe both spacers enhance the microarray signal response, but oligo(dT) is strikingly better than dodecyl. Moreover, we discover that a microarray spot coprinted with the two distinct aptamers (HTQ and HTDQ) functions like a bivalent molecular construct and exhibits an avidity effect. With the synergy of oligo(dT) spacers and the avidity effect, detection of picomolar-range thrombin in the presence of either 10% unlabeled serum or a 10,000-fold excess of labeled serum total protein is achieved. It corresponds to a 100-1000-fold sensitivity enhancement as compared to using an individual aptamer without a spacer.

Recent advances in recognition elements of food and environmental biosensors: a review

A sensitive monitoring of contaminants in food and environment, such as chemical compounds, toxins and pathogens, is essential to assess and avoid risks for both, human and environmental health. To accomplish this, there is a high need for sensitive, robust and cost-effective biosensors that make real time and in situ monitoring possible. Due to their high sensitivity, selectivity and versatility, affinity-based biosensors are interesting for monitoring contaminants in food and environment. Antibodies have long been the most popular affinity-based recognition elements, however recently a lot of research effort has been dedicated to the development of novel recognition elements with improved characteristics, like specificity, stability and cost-efficiency. This review discusses three of these innovative affinity-based recognition elements, namely, phages, nucleic acids and molecular imprinted polymers and gives an overview of biosensors for food and environmental applications where these novel affinity-based recognition elements are applied.

Expanding the chemistry of DNA for in vitro selection

Six new 5-position modified dUTP derivatives connected by a unique amide linkage were synthesized and tested for compatibility with the enzymatic steps of in vitro selection. Six commercially available DNA polymerases were tested for their ability to efficiently incorporate each of these dUTP derivatives during PCR. It was not possible to perform PCR under standard conditions using any of the modified dUTP derivatives studied. In contrast, primer extension reactions of random templates, as well as defined sequence templates, were successful. KOD XL and D. Vent DNA polymerases were found to be the most efficient at synthesizing full-length primer extension product, with all of the dUTP derivatives tested giving yields similar to those obtained with TTP. Several of these modified dUTPs were then used in an in vitro selection experiment comparing the use of modified dUTP derivatives with TTP for selecting aptamers to a protein target (necrosis factor receptor superfamily member 9, TNFRSF9) that had previously been found to be refractory to in vitro selection using DNA. Remarkably, selections employing modified DNA libraries resulted in the first successful isolation of DNA aptamers able to bind TNFRSF9 with high affinity.

In silico selection of RNA aptamers

In vitro selection of RNA aptamers that bind to a specific ligand usually begins with a random pool of RNA sequences. We propose a computational approach for designing a starting pool of RNA sequences for the selection of RNA aptamers for specific analyte binding. Our approach consists of three steps: (i) selection of RNA sequences based on their secondary structure, (ii) generating a library of three-dimensional (3D) structures of RNA molecules and (iii) high-throughput virtual screening of this library to select aptamers with binding affinity to a desired small molecule. We developed a set of criteria that allows one to select a sequence with potential binding affinity from a pool of random sequences and developed a protocol for RNA 3D structure prediction. As verification, we tested the performance of in silico selection on a set of six known aptamer–ligand complexes. The structures of the native sequences for the ligands in the testing set were among the top 5% of the selected structures. The proposed approach reduces the RNA sequences search space by four to five orders of magnitude—significantly accelerating the experimental screening and selection of high-affinity aptamers.

Synthesis of biotin-AMP conjugate for 5' biotin labeling of RNA through one-step in vitro transcription

Biotin-labeled RNA has found broad applications in chemistry, biology and biomedicine. In this protocol, we describe a simple procedure for 5' RNA biotin labeling by one-step in vitro transcription. A biotin-AMP (adenosine 5'-monophosphate) conjugate, biotin-HDAAMP (adenosine 5'-(6-aminohexyl) phosphoramide; where HDA is 1,6-hexanediamine), is chemically synthesized. Transcription initiation by biotin-HDAAMP under the T7 phi 2.5 promoter produces 5' biotin-labeled RNA with high labeling efficiency. The procedure is especially useful for biotin labeling of RNA that is larger than 60 nucleotides. In addition, the protocol provides an attractive alternative to chemical synthesis of biotin-labeled small RNA of less than 60 nucleotides, particularly when the desired quantity of RNA is low. The whole procedure, from chemical syntheses to isolated biotin-labeled RNA, can be completed within 2 weeks.

Aptamers that recognize drug-resistant HIV-1 reverse transcriptase

Drug-resistant variants of HIV-1 reverse transcriptase (RT) are also known to be resistant to anti-RT RNA aptamers. In order to be able to develop diagnostics and therapies that can focus on otherwise drug-resistant viruses, we have isolated two aptamers against a well-known, drug-resistant HIV-1 RT, Mutant 3 (M3) from the multidrug-resistant HIV-1 RT panel. One aptamer, M302, bound M3 but showed no significant affinity for wild-type (WT) HIV-1 RT, while another aptamer, 12.01, bound to both M3 and WT HIV-1 RTs. In contrast to all previously selected anti-RT aptamers, neither of these aptamers showed observable inhibition of either polymerase or RNase H activities. Aptamers M302 and 12.01 competed with one another for binding to M3, but they did not compete with a pseudoknot aptamer for binding to the template/primer cleft of WT HIV-1 RT. These results represent the surprising identification of an additional RNA-binding epitope on the surface of HIV-1 RT. M3 and WT HIV-1 RTs could be distinguished using an aptamer-based microarray. By probing protein conformation as a correlate to drug resistance we introduce an additional and useful measure for determining HIV-1 drug resistance.

Systematic investigation of optimal aptamer immobilization for protein-microarray applications

Aptamers are short single-stranded DNA or RNA oligonucleotides that can bind to a wide range of target molecules with high affinity and specificity. As nucleic acids, aptamers can undergo denaturation, but the process is reversible. As a result of this stability and the possibility of automated selection of aptamers, these oligonucleotides are highly promising capture molecules in microarray formats. In this study, his-tagged proteins and an aptamer directed against the his-tag were chosen as a model system. Different factors affect the activity of aptamers immobilized on a solid support like a microarray surface. The orientation of the immobilized aptamer plays an important role in correct aptamer folding and, thus, in effective binding of the corresponding target. Other important parameters identified in this work are the microarrays' surface charge as well as the length of the spacer between aptamer and solid support. These parameters were investigated systematically, resulting in the development of an aptamer-based microarray for detection of his-tagged proteins. The general applicability of the developed immobilization strategy was demonstrated by utilization of three different aptamers.

Microarray methods for protein biomarker detection

The application of protein biomarkers as an aid for the detection and treatment of diseases has been subject to intensified interest in recent years. The quantitative assaying of protein biomarkers in easily obtainable biological fluids such as serum and urine offers the opportunity to improve patient care via earlier and more accurate diagnoses in a convenient, non-invasive manner as well as providing a potential route towards more individually targeted treatment. Essential to achieving progress in biomarker technology is the ability to screen large numbers of proteins simultaneously in a single experiment with high sensitivity and selectivity. In this article, we highlight recent progress in the use of microarrays for high-throughput biomarker profiling and discuss some of the challenges associated with these efforts.

Therapeutic applications of aptamers

Aptamers constitute a new class of oligonucleotides that have gained therapeutic importance. With the approval of the first aptamer drug, pegaptanib, interest in this class of oligonucleotides, often referred to as 'chemical antibodies', has increased. This article discusses aptamers in relation to other oligonucleotide molecules such as antisense nucleotides, short inhibitory sequences, ribozymes and so on. The development of pegaptanib is looked at from the point of view of the challenges faced in converting aptamers into therapeutic molecules. Cases of other aptamers, which show promise as drugs, are discussed in slightly greater detail. Comparison with antibodies and small molecules, which have hitherto held monopoly in this area, is also made.

Rabbit antibody detection with RNA aptamers

Antibody-based detection systems are widely used, but in the cases of immunoprecipitations and enzyme-linked immunoassays, they can be laborious. These techniques require the preparation of at least two kinds of non-cross-reactive immunoglobulin Gs (IgGs), usually made from different species against the single target molecule. Aptamers composed of nucleic acids possess strict recognition ability for the target molecule's three-dimensional structure and, thus, are considered to act like IgG. In this study, experimental trials were designed to combine the advantages of IgG and aptamers. For this purpose, aptamers against rabbit IgG were identified by in vitro selection. One of the obtained aptamers had a dissociation constant lower than 15 pM to the rabbit IgG. It bound specifically to the constant region of the rabbit IgG, and no binding was observed with mouse or goat IgG. Moreover, this aptamer recognized only the native form of rabbit IgG and could not bind the sodium dodecyl sulfate (SDS)-denatured form. These features show the advantage of using the aptamer as a secondary probing agent rather than the usual secondary antibodies.

Affinity reagent resources for human proteome detection: initiatives and perspectives

Essential to the ambition of characterising fully the human proteome are systematic and comprehensive collections of specific affinity reagents directed against all human proteins, including splice variants and modifications. Although a large number of affinity reagents are available commercially, their quality is often questionable and only a fraction of the proteome is covered. In order for more targets to be examined, there is a need for broad availability of panels of affinity reagents, including binders against proteins of unknown functions. The most familiar affinity reagents are antibodies and their fragments, but engineered forms of protein scaffolds and nucleic acid aptamers with similar diversity and binding properties are becoming viable alternatives. Recent initiatives in Europe and the USA have been established to improve both the availability and quality of reagents for affinity proteomics, with the ultimate aim of creating standardised collections of well-validated binding molecules for proteome analysis. As well as coordinating affinity reagent production through existing resources and technology providers, these projects aim to benchmark key molecular entities, tools, and applications, and establish the bioinformatics framework and databases needed. The benefits of such reagent resources will be seen in basic research, medicine and the biotechnology and pharmaceutical industries.

Exploring the sequence space of a DNA aptamer using microarrays

The relationship between sequence and binding properties of an aptamer for immunoglobulin E (IgE) was investigated using custom DNA microarrays. Single, double and some triple mutations of the aptamer sequence were created to evaluate the importance of specific base composition on aptamer binding. The majority of the positions in the aptamer sequence were found to be immutable, with changes at these positions resulting in more than a 100-fold decrease in binding affinity. Improvements in binding were observed by altering the stem region of the aptamer, suggesting that it plays a significant role in binding. Results obtained for the various mutations were used to estimate the information content and the probability of finding a functional aptamer sequence by selection from a random library. For the IgE-binding aptamer, this probability is on the order of 10⁻¹⁰ to 10⁻⁹. Results obtained for the double and triple mutations also show that there are no compensatory mutations within the space defined by those mutations. Apparently, at least for this particular aptamer, the functional sequence space can be represented as a rugged landscape with sharp peaks defined by highly constrained base compositions. This makes the rational optimization of aptamer sequences using step-wise mutagenesis approaches very challenging.

Microfluidic selection and applications of aptamers

The high affinity and specificity of aptamers make them ideal reagents for a wide range of analytical applications. It is not surprising that they are finding application in microfluidics as well. CE has proven to be an efficient technique for isolating aptamers. Aptamers have been used as affinity reagents in CE assays. Aptamer-based chromatography stationary phases have demonstrated unique selectivities. Possibly the application that holds the highest potential is aptamer microarrays for screening proteomic samples.

Fabricating RNA microarrays with RNA-DNA surface ligation chemistry

A novel surface attachment strategy that utilizes RNA-DNA surface ligation chemistry to create renewable RNA microarrays from single-stranded DNA (ssDNA) microarrays on gold surfaces is demonstrated. The enzyme T4 DNA ligase was used to catalyze the formation of a phosphodiester bond between 5'-phosphate-modified ssDNA attached to the surface and the 3'-hydroxyl group of unlabeled RNA molecules from solution in the presence of a complementary template DNA strand. Surface plasmon resonance imaging (SPRI) measurements were performed to characterize the ligation process as well as to verify the bioactivity of the ssRNA microarray in terms of (i) the hybridization adsorption of complementary DNA onto the RNA array to form a surface RNA-DNA heteroduplex and (ii) the hydrolysis of the RNA microarrays with either ribonuclease S or ribonuclease H (RNase H). The hydrolysis of the surface-bound RNA with RNase H required the presence of a surface heteroduplex and, upon completion, regenerated the original 5'-phosphate-terminated ssDNA array elements. These ssDNA array elements could be ligated again to create a new RNA microarray. These RNA microarrays can be used in the study of RNA-protein/RNA/aptamer bioaffinity interactions and for the enzymatically amplified SPRI detection of DNA in the presence of RNase H.