Production and characterization of a broad-specificity polyclonal antibody for O,O-diethyl organophosphorus pesticides and a quantitative structure–activity relationship study of antibody recognition

A new strategy to generate nanobodies for the coumaphos based on the synthesized nanobody libraries

To break through the bottleneck in preparation of nanobody (Nb) for chemical contaminants induced by the difficulties in the synthesis of immunogen, complexity and unexpectable efficiency of immunization, a novel strategy to generate Nbs based on the designed synthetic Nb libraries with final size up to 109 cfu/mL was adopted and succeeded in selection of anti-coumaphos Nb A4. Furthermore, an affinity-matured mutant Nb 3G was obtained from the secondary library. Finally, an ic-ELISA was established with the limit of detection for coumaphos low to 1.90 ng/mL, 6.4-fold improved than the parent Nb A4, and the detection range from 3.06 to 15.77 ng/mL. Meanwhile, the recovery rate of vegetable samples was from 89.9% to 98.5%. Finally, the accuracy was testified by the standard UPLC-MS/MS method with R2 up to 0.99. Overall, fully synthetic Nb libraries constructed in this work provided an alternative possibility to generate the specific Nbs for chemical contaminants.

Designing a size exclusion-based hapten and the development of a quantitative and visual time-resolved fluorescence immunochromatography assay strip for detecting dimethomorph and flumorph in a group-specific manner

Based on the size and surface properties of dimethomorph and flumorph, we used a computer simulation-assisted size exclusion hapten design strategy to develop group-specific monoclonal antibodies that can simultaneously recognize dimethomorph and flumorph. For this, we performed quantitative and visual semi-quantitative time-resolved fluorescence immunochromatography (TRFICA) to simultaneously detect dimethomorph and flumorph in potatoes and apples. In potato samples, the visual limit of detection (vLOD) for dimethomorph and flumorph was 4 ng/mL and 8 ng/mL, respectively, whereas the quantitative limit of detection (qLOD) for dimethomorph and flumorph was 0.26 and 0.33 ng/mL, respectively. The vLOD of dimethomorph and flumorph in apple samples was 8 ng/mL, whereas the qLOD of dimethomorph and flumorph was 0.17 and 0.38 ng/mL, respectively. The average recovery of potato and apple samples ranged from 77.5% to 121.7%, which indicated that the method can be used to rapidly detect dimethomorph and flumorph in food samples.

Reverse design of haptens based on antigen spatial conformation to prepare anti-capsaicinoids&gingerols antibodies for monitoring of gutter cooking oil

Rapid simultaneous detection of multi-component adulteration markers can improve the accuracy of identification of gutter cooking oil in edible oil, which is made possible by broad-spectrum antibody (bs-mAb). This study used capsaicinoids (CPCs) and gingerol derivatives (GDs) as adulteration markers, and two broad-spectrum haptens (bs-haptens) were designed and synthesized based on a reverse design strategy of molecular docking. Electrostatic potential (ESP) and monoclonal antibodies (mAbs) preparation verified the strategy's feasibility. To further investigate the recognition mechanism, five other reported antigens and mAbs were also used. Finally, the optimal combination (Hapten 5-OVA/1-F12) and key functional groups (f-groups) were determined. The half maximal inhibitory concentration (IC50) for CPCs-GDs was between 88.13 and 499.16 ng/mL. Meanwhile, a preliminary lateral flow immunoassay (LFIA) study made practical monitoring possible. The study provided a theoretical basis for the virtual screening of bs-haptens and simultaneous immunoassay of multiple exogenous markers to monitor gutter oil rapidly and accurately.

Molecular Evolution of Antiparathion Nanobody with Enhanced Sensitivity and Specificity Based on Structural Analysis

Nanobody (Nb) has gained significant attention in immunoassays owing to its numerous advantages, particularly its ease of molecular evolution. However, the limited understanding of how high sensitivity and specificity attained for antihapten Nbs hamper the development of high-performance Nbs. Herein, the antiparathion Nb (Nb9) we prepared previously was chosen as the model, and an approach based on X-ray crystallography, molecular docking, and rational site-directed saturation mutation for constructing a rapid and effective platform for nanobody evolution was described. Based on the structural analysis, two mutants, namely Nb-D5 (IC50 = 2.4 ± 0.2 ng/mL) and Nb-D12 (IC50 = 2.7 ± 0.1 ng/mL), were selected out from a six-sites directed saturation mutation library, 3.5-fold and 3.1-fold sensitivity enhancement over Nb9 to parathion, respectively. Besides, Nb-D12 exhibited improved sensitivity for quinalphos, triazophos, and coumaphos (5.4-35.4 ng/mL), indicating its broader detection potential. Overall, our study advances an effective strategy for the future rational evolution of Nbs with desirable performance.

Structural Insights into the Stability and Recognition Mechanism of the Antiquinalphos Nanobody for the Detection of Quinalphos in Foods

Nanobodies (Nbs) have great potential in immunoassays due to their exceptional physicochemical properties. With the immortal nature of Nbs and the ability to manipulate their structures using protein engineering, it will become increasingly valuable to understand what structural features of Nbs drive high stability, affinity, and selectivity. Here, we employed an anti-quinalphos Nb as a model to illustrate the structural basis of Nbs' distinctive physicochemical properties and the recognition mechanism. The results indicated that the Nb-11A-ligand complexes exhibit a "tunnel" binding mode formed by CDR1, CDR2, and FR3. The orientation and hydrophobicity of small ligands are the primary determinants of their diverse affinities to Nb-11A. In addition, the primary factors contributing to Nb-11A's limited stability at high temperatures and in organic solvents are the rearrangement of the hydrogen bonding network and the enlargement of the binding cavity. Importantly, Ala 97 and Ala 34 at the active cavity's bottom and Arg 29 and Leu 73 at its entrance play vital roles in hapten recognition, which were further confirmed by mutant Nb-F3. Thus, our findings contribute to a deeper understanding of the recognition and stability mechanisms of anti-hapten Nbs and shed new light on the rational design of novel haptens and directed evolution to produce high-performance antibodies.

A Novel Lateral Flow Immunochromatographic Assay for Rapid and Simultaneous Detection of Aflatoxin B1 and Zearalenone in Food and Feed Samples Based on Highly Sensitive and Specific Monoclonal Antibodies

Simultaneous aflatoxin (AFB1) and zearalenone (ZEN) contamination in agro-products have become widespread globally and have a toxic superposition effect. In the present study, we describe a highly sensitive and specific dual lateral flow immunochromatographic assay (dual test strip) for rapid and simultaneous detection of AFB1 and ZEN in food and feed samples based on respective monoclonal antibodies (mAbs). Two immunogens AFB1-BSA (an AFB1 and bovine serum albumin (BSA) conjugate) and ZEN-BSA (a ZEN and BSA conjugate) were synthesized in oximation active ester (OAE) and amino glutaraldehyde (AGA). The molecular binding ratio of AFB1:BSA was 8.64:1, and that of ZEN:BSA was 17.2:1, identified by high-resolution mass spectrometry (HRMS) and an ultraviolet spectrometer (UV). The hybridoma cell lines 2A11, 2F6, and 3G2 for AFB1 and 2B6, 4D9 for ZEN were filtered by an indirect non-competitive enzyme-linked immunosorbent assay (inELISA) and an indirect competitive enzyme-linked immunosorbent assay (icELISA), respectively. As AFB1 mAb 2A11 and ZEN mAb 2B6 had the lowest 50% inhibitive concentration (IC50) and cross-reactivity (CR), they were selected for subsequent experiments. By systematically optimizing the preparation condition of gold nanoparticles (AuNPs), AuNPs-labeled mAbs, and detection condition, the visual limit of detection (LOD) of the dual test strip was 1.0 μg/L for AFB1 and 5.0 μg/L for ZEN, whereas that of the test strip reader was 0.23 μg/L for AFB1 and 1.53 μg/L for ZEN. The high reproducibility and stability of the dual test were verified using mycotoxin-spiked samples. The dual test strips were highly specific and sensitive for AFB1 and ZEN, which were validated using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Thus, the proposed AFB1 and ZEN dual test strip is suitable for rapid and simultaneous detection of AFB1 and ZEN contamination in food and feed samples.

Broad-specificity time-resolved fluorescent immunochromatographic strip for simultaneous detection of various organophosphorus pesticides based on indirect probe strategy

The massive use of organophosphorus pesticides (OPs) poses a great threat to food safety, human health and environmental protection. As there are many kinds of pesticides, their detection is facing a severe challenge. The simultaneous detection of multiple organophosphorus pesticides in one test is a problem to be solved at present. In this paper, a time-resolved fluorescent immunochromatographic (TRFIA) strip is prepared by using broad-specificity antibodies (Abs) of OPs as the recognition element. Abs were connected to europium oxide latex microspheres using sheep anti-mouse antibodies (SaMIgG) to form an indirect probe. This strategy could effectively realize signal amplification, and could save the amount and protect the activity of Abs. After the detection, the color change of the test line (T-line) was observed to make qualitative judgment under UV-light (365 nm). Then, the images of the positive sample were analyzed by using ImageJ to complete the quantitative detection. Under optimal construction and operating conditions, the limit of detection of the strip could reach 0.53 ng g^-1. And the TRFIA strip performed well in the additive test of vegetable samples. It is inexpensive to prepare, convenient to carry, and easy to operate. More importantly, it improves the detection efficiency and meets the needs of rapid field testing of a large number of samples.

Electrofusion preparation of anti-triazophos monoclonal antibodies for development of an indirect competitive enzyme-linked immunosorbent assay

Immunoassays have been widely used to detect small molecular contaminants due to the advantages of simplicity, high throughout and low-cost. Antibodies are essential reagents of immunoassays, their quality directly determines the characteristics of immunoassays. In this study, the monoclonal antibodies (mAbs) of triazophos were prepared by electrofusion, and used to develop an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA). Under the optimal electrofusion conditions (cells treatment with pronase, the alternating electric field strength of 45 V cm^-1, the direct current voltage of 3 kV), the fusion efficiency was 1.104 ± 0.063‱, which was improved more than 4-fold compared with the chemical fusion method (0.255 ± 0.089‱). Three hybrid cell lines that can stably secrete the anti-triazophos mAbs were obtained. The cell line 4G6F10 showed the highest sensitivity, which was used to generate mAb and develop an ic-ELISA. After optimization, the 50% inhibition concentration (IC₅₀), limit of detection (LOD) and linear range (IC₁₀-IC₉₀) of the ic-ELISA were 0.32 ng mL^-1, 0.08 ng mL^-1 and 0.08-2.17 ng mL^-1, respectively. There was no significant cross-reactivity with the analogues of triazophos. The average recoveries of triazophos in spiked samples were 77.5%-89.3% with the relative standard deviations of 0.1%-9.2%. In addition, the ic-ELISA showed good repeatability, reproducibility and accuracy for the analysis of apple samples spiked with triazophos.

Synthesis of Zearalenone Immunogen and Comparative Analysis of Antibody Characteristics

Background

This study aimed to explore the zearalenone (ZEN) immunogen synthesis method, immunogenicity, and antibody characteristics and to lay a foundation for the establishment of immunoassay methods for ZEN single residue and ZEN and its analogs total residue.

Methods

Based on the molecular structure and active sites of ZEN, oxime active ester (OAE), condensation mixed anhydride (CMA), formaldehyde (FA), and 1,4-butanediol diglycidyl ether method (BDE) were designed and used for immunogen (ZEN-BSA) synthesis. The immunogens were identified by infrared (IR) and ultraviolet (UV) spectra and gel electrophoresis (SDS-PAGE) and were then used to immunize Balb/c mice to prepare ZEN polyclonal antibody (ZEN pAb). The titers and sensitivity of the ZEN pAb were determined by indirect noncompetitive ELISA (inELISA) and indirect competitive ELISA (icELISA), respectively, and its specificity was assessed by the cross-reaction test (CR).

Results

ZEN-BSA was successfully synthesized, and the molecular binding ratios of ZEN to BSA were 17.2 : 1 (OAE), 14.6 : 1 (CMA), 9.7 : 1 (FA), and 8.3 : 1 (BDE), respectively. The highest inELISA titers of ZEN pAb of each group were 1 : (6.4 × 10³) (OAE), 1 : (3.2 × 10³) (CMA), 1 : (1.6 × 10³) (FA), and 1 : (1.6 × 10³) (BDE), respectively. The 50% inhibition concentrations (IC50) for ZEN by icELISA of each group were 11.67 μg/L (OAE), 16.29 μg/L (CMA), 20.92 μg/L (FA) and 24.36 μg/L (BDE), respectively. ZEN pAb from the mice immunized with ZEN-BSA (OAE) and ZEN-BSA (CMA) had class broad specificity to ZEN and its analogs. The CRs of ZEN pAb with α-ZAL, β-ZAL, α-ZOL, β-ZOL, and ZON were 36.53%, 16.98%, 64.33%, 20.16%, and 10.66%, respectively. ZEN pAb from the mice immunized with ZEN-BSA (FA) and ZEN-BSA (BDE) had high specificity for ZEN. The CRs of ZEN pAb with its analogs were all less than 1.0%.

Conclusion

This study demonstrated that the preparation of the class broad-specificity antibodies of ZEN and its analogs can be achieved by immunizing animals with the immunogen ZEN-BSA prepared by the OAE method, while the preparation of highly specific antibodies can be achieved by immunizing animals with the immunogen ZEN-BSA prepared by the FA method. These findings lay the material and technical foundation for immunoassay of ZEN single residue and ZEN and its analogs total residue.

QSAR analysis of immune recognition for triazine herbicides based on immunoassay data for polyclonal and monoclonal antibodies

A common task in the immunodetection of structurally close compounds is to analyze the selectivity of immune recognition; it is required to understand the regularities of immune recognition and to elucidate the basic structural elements which provide it. Triazines are compounds of particular interest for such research due to their high variability and the necessity of their monitoring to provide safety for agricultural products and foodstuffs. We evaluated the binding of 20 triazines with polyclonal (pAb) and monoclonal (mAb) antibodies obtained using atrazine as the immunogenic hapten. A total of over 3000 descriptors were used in the quantitative structure-activity relationship (QSAR) analysis of binding activities (pIC₅₀). A comparison of the two enzyme immunoassay systems showed that the system with pAb is much easier to describe using 2D QSAR methodology, while the system with mAb can be described using the 3D QSAR CoMFA. Thus, for the 3D QSAR model of the polyclonal antibodies, the main statistical parameter q² (‘leave-many-out’) is equal to 0.498, and for monoclonal antibodies, q² is equal to 0.566. Obviously, in the case of pAb, we deal with several targets, while in the case of mAb the target is one, and therefore it is easier to describe it using specific fields of molecular interactions distributed in space.

Sensitive detection of Campylobacter jejuni using one-step strategy based on functional nanospheres of immunomagnetic capture and quantum dots

Campylobacter jejuni has emerged as the most common bacterial foodborne illness in the developed world. Here, we demonstrate a convenient one-step strategy for detecting C. jejuni. Immunomagnetic nanospheres (IMNS) and immunofluorescent nanospheres (IFNS, quantum dots) were used for the simultaneous, sensitive capture and recognition of C. jejuni. After magnetic separation with the IMNS, detection of C. jejuni was achieved with fluorescence measurement of the IFNS in the sandwich complexes (IMNS-bacteria-IFNS). The limit of detection of this assay was 10³ CFU/mL, and the linear range was from 10⁵ to 10⁷ CFU/mL (R² = 0.9994). When compared with a conventional two-step detection strategy, in which C. jejuni was first captured with the IMNS and then detected using the IFNS, this one-step detection strategy enhance sensitivity and save time. This suggested that the developed method has the potential for use as an alternative to the standard method for food quality assurance, as it provides rapid detection of C. jejuni in foodstuffs and the environment.

Isolation of Bactrian Camel Single Domain Antibody for Parathion and Development of One-Step dc-FEIA Method Using VHH-Alkaline Phosphatase Fusion Protein

A heavy chain variable fragment of heavy chain only antibodies derived from camelids termed VHH shows beneficial characteristics for immunoassay in terms of high sensitivity, outstanding stability and ease in expression. In the present study, we isolated six VHHs from phage display library against parathion, which is a widely used organophosphorus pesticide with high toxicity and persistence. One of six selected VHHs named VHH9, showed highest specificity and superior thermo-stability. A VHH9-alkaline phosphatase (AP) fusion was constructed and used to establish a one-step direct competitive fluorescence enzyme immunoassay (dc-FEIA) with a half maximal inhibitory concentration (IC50) of 1.6 ng/mL and a limit of detection of 0.2 ng/mL which was 4-fold or 3-fold higher sensitivity than direct competitive enzyme-linked immunoassay (dc-ELISA) and indirect competitive enzyme-linked immunoassay (ic-ELISA) for parathion. Furthermore, our assay indicated a 50% reduction on operation time compared with the ic-ELISA method. The presented immunoassay was validated with spiked Chinese cabbage, cucumber, and lettuce samples, and confirmed by UPLC-MS/MS. The results indicated that the VHH-AP-based dc-FEIA is a reproducible detection assay for parathion residues in vegetable samples.

Doses of Immunogen Contribute to Specificity Spectrums of Antibodies against Aflatoxin

Research about antibody specificity spectra was conducted to develop single-specific antibodies or broad-specific antibodies. Aflatoxins, as one class of high-toxicity mycotoxins, were selected as the research targets to investigate the effect of the immunogen dose on antibody specificity spectra. For this aim, 16 monoclonal antibodies were induced by low or high doses of aflatoxin B₁-BSA, and 34 monoclonal antibodies were induced by low or high doses of aflatoxin M₁-BSA. The specificities of the antibodies induced, whether by aflatoxin B₁ conjugate or aflatoxin M₁ conjugate, indicated that the low dose of the immunogen induced a narrow spectrum of antibody specificity, while the high dose of the immunogen showed an advantage to form a broad spectrum of antibody specificity. Therefore, this report provides important information for the development of new antibodies against small molecules like aflatoxins.

Investigation of an Immunoassay with Broad Specificity to Quinolone Drugs by Genetic Algorithm with Linear Assignment of Hypermolecular Alignment of Data Sets and Advanced Quantitative Structure-Activity Relationship Analysis

A polyclonal antibody against the quinolone drug pazufloxacin (PAZ) but with surprisingly broad specificity was raised to simultaneously detect 24 quinolones (QNs). The developed competitive indirect enzyme-linked immunosorbent assay (ciELISA) exhibited limits of detection (LODs) for the 24 QNs ranging from 0.45 to 15.16 ng/mL, below the maximum residue levels (MRLs). To better understand the obtained broad specificity, a genetic algorithm with linear assignment of hypermolecular alignment of data sets (GALAHAD) was used to generate the desired pharmacophore model and superimpose the QNs, and then advanced comparative molecular field analysis (CoMFA) and advanced comparative molecular similarity indices analysis (CoMSIA) models were employed to study the three-dimensional quantitative structure-activity relationship (3D QSAR) between QNs and the antibody. It was found that the QNs could interact with the antibody with different binding poses, and cross-reactivity was mainly positively correlated with the bulky substructure containing electronegative atom at the 7-position, while it was negatively associated with the large bulky substructure at the 1-position of QNs.

Molecular modeling application on hapten epitope prediction: an enantioselective immunoassay for ofloxacin optical isomers

To deepen our understanding of the physiochemical principles that govern hapten-antibody recognition, ofloxacin enantiomers were chosen as a model for epitope prediction of small molecules. In this study, two monoclonal antibodies (mAbs) mAb-WR1 and mAb-MS1 were raised against R-ofloxacin and S-ofloxacin, respectively. The enantioselective mAbs have a high sensitivity and specificity, and the enantioselectivity is not affected by heterologous coating format reactions. The epitopes of the ofloxacin isomers were predicted using the hologram quantitative structure-activity relationship (HQSAR) and comparative molecular field analysis (CoMFA) approaches. The results consistently show that the epitope of the chiral hapten should be primarily composed of the oxazine ring and the piperazinyl ring and mAbs recognize the hapten from the side of this moiety. The enantioselectivity of mAbs is most likely due to the steric hindrance caused by the stereogenic center of the epitope. Modeling of chiral hapten-protein mimics reveals that ofloxacin isomers remain upright on the surface of the carrier protein. Suggestions to improve the enantioselectivity of antibodies against ofloxacin isomers were also proposed. This study provided a simple, efficient, and general method for predicting the epitopes of small molecules via molecular modeling. The epitope predictions for small molecules may create a theoretical guide for hapten design.

Development of a sensitive monoclonal antibody-based enzyme-linked immunosorbent assay for the analysis of paclobutrazol residue in wheat kernel

An indirect competitive enzyme-linked immunosorbent assay (icELISA) was developed with monoclonal antibody (mAb) mAb6H73C9 recognizing the plant growth regulator paclobutrazol (PBZ). The icELISA had a half-maximum inhibition concentration (IC50) and working range of approximately 8.7 and 2.0-50.4 ng/mL, respectively. Average recoveries of PBZ in the wheat (Triticum aestivum) kernel samples were between 84.3 and 118.9% with relative standard deviations between 3.9 and 14.2%. As determined by the icELISA and further confirmed by liquid chromatography-electrospray ionization quadrupole Orbitrap mass spectrometry (LC-ESI-MS) analysis, the maximum residue concentration was about 0.07 mg/kg in the kernel samples, which indicated that PBZ could transfer from PBZ- treated seedlings to the kernel samples. The correlation coefficient (R(2)) between icELISA and LC-ESI-MS results was 0.979, which manifested that the developed icELISA was sensitive enough for monitoring PBZ residues in wheat kernels.

Synthesis of novel hapten and production of generic monoclonal antibody for immunoassay of penicillins residues in milk

The objective of this study was to produce a generic monoclonal antibody for determination of penicillins residues in milk. The compound 6-aminopenicillanic acid was used as the template to synthesize two novel generic haptens that were used to produce the monoclonal antibodies. The obtained monoclonal antibodies simultaneously recognized 11 penicillin drugs (amoxicillin, ampicillin, penicillin G, penicillin V, sulbenicillin, carbencillin, methicillin, cloxacillin, dicloxacillin, oxacillin, and nafcillin). After evaluation of different reagent combinations, a heterologous indirect competitive enzyme immunoassay was developed to multi-determine the 11 drugs in milk. The crossreactivities to the 11 drugs were in a range of 16%-117% and the limits of detection were in a range of 0.7-9.3 ng/mL depending on the drug. The recoveries from the fortified blank milk were in a range of 77.6%-99.4% with coefficients of variation lower than 13.5%. This method could be used as a rapid screen tool for routine monitoring the residues of the 11 penicillin drugs in animal derived foods.

Development of an enzyme linked immunosorbent assay and an immunochromatographic assay for detection of organophosphorus pesticides in different agricultural products

Objective

Organophosphorus (OP) pesticides are considered hazardous substances because of their high toxicity to nontarget species and their persistence in the environment and agricultural products. Therefore, it is important to develop a rapid, sensitive, and economical method for detecting OP pesticides and their residues in food and the environment.

Methods

A broad, selective monoclonal antibody (MAb) for organophosphorus pesticides was produced. Based on the MAb, an enzyme linked immunosorbent assay (ELISA) and an immunochromatography assay (ICA) for detecting OP pesticides in different agricultural products were developed using a binding inhibition format on microtiter plates and a membrane strip, respectively.

Results

Under the optimized conditions, the IC₅₀ values of the ELISA ranged from 3.7 to 162.2 ng mL^–1 for the 8 OP pesticides. The matrix interferences of Apple, Chinese cabbage, and greengrocery were removed by 40-fold dilution, the recoveries from spiked samples ranged from 79.1% to 118.1%. The IC₅₀ values of ICA for the 8 OP pesticides ranged from 11.8 to 470.4 ng mL⁻¹. The matrix interference was removed from the Chinese cabbage and Apple samples with 5-fold dilution, and the interference was removed from the greengrocery samples with 20-fold dilution. The recoveries from the spiked samples ranged between 70.6 and 131.9%. The established ELISA and ICA were specific selectivity for the 8 OP pesticides.

Conclusions

The established ELISA is a sensitive screening method for the detection of OP pesticides, but the ELISA detection method depends on a laboratory platform and requires a relative long assay time and several steps operation. The established ICA is very useful as a screening method for the quantitative, semi-quantitative or qualitative detection of OP pesticides in agricultural products, and it has advantages over ELISA methods with regard to factors such as the testing procedure, testing time, and matrix interferences, among others.

Computer-aided molecular modeling study on antibody recognition of small molecules: an immunoassay for triazine herbicides

Most immunoassays for determination of small molecules are still designed on the basis of the "trial and error" method, due to the lack of understanding of antibody recognition. In the present study, we developed a heterologous indirect competitive enzyme-linked immunosorbent assay for determination of triazine herbicides, with limits of detection for 11 triazines ranging from 0.05 to 29.4 μg/L. Mechanisms of the antigen-antibody interaction were studied by computer-aided molecular modeling (CAMM)-based quantitative structure-activity relationship analyses. Co-effects of the analytes' substructural hydrophobic, electrostatic, and steric fields on antibody recognition were further revealed. Hydrophobicity of the antigens was demonstrated to have the most important impact. Even less exposed substituents provided hydrophobic force to the antigen-antibody interaction. Dislocated orientation of analyte functional groups could lead to steric hindrance and hydrophobic misleading of antibody recognition. This may happen even when the antigens contained the same substituent as the hapten. Frontier orbital energies also affect the reaction significantly. This study highlights of the power of CAMM-based analyses, providing insights into antibody recognition of small molecules.

Investigating the quantitative structure-activity relationships for antibody recognition of two immunoassays for polycyclic aromatic hydrocarbons by multiple regression methods

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous contaminants found in the environment. Immunoassays represent useful analytical methods to complement traditional analytical procedures for PAHs. Cross-reactivity (CR) is a very useful character to evaluate the extent of cross-reaction of a cross-reactant in immunoreactions and immunoassays. The quantitative relationships between the molecular properties and the CR of PAHs were established by stepwise multiple linear regression, principal component regression and partial least square regression, using the data of two commercial enzyme-linked immunosorbent assay (ELISA) kits. The objective is to find the most important molecular properties that affect the CR, and predict the CR by multiple regression methods. The results show that the physicochemical, electronic and topological properties of the PAH molecules have an integrated effect on the CR properties for the two ELISAs, among which molar solubility (S_m) and valence molecular connectivity index (³χ^v) are the most important factors. The obtained regression equations for Ris^C kit are all statistically significant (p < 0.005) and show satisfactory ability for predicting CR values, while equations for RaPID kit are all not significant (p > 0.05) and not suitable for predicting. It is probably because that the Ris^C immunoassay employs a monoclonal antibody, while the RaPID kit is based on polyclonal antibody. Considering the important effect of solubility on the CR values, cross-reaction potential (CRP) is calculated and used as a complement of CR for evaluation of cross-reactions in immunoassays. Only the compounds with both high CR and high CRP can cause intense cross-reactions in immunoassays.

Attomolar determination of coumaphos by electrochemical displacement immunoassay coupled with oligonucleotide sensing

Coumaphos, an organophosphorus pesticide (OP) used worldwide, has raised serious public concerns due to its positive association with major types of cancer. Herein, a novel method for attomolar coumaphos detection was developed on the basis of an electrochemical displacement immunoassay coupled with oligonucleotide sensing. An optimized displacement immunoassay was constructed to improve the binding efficiency of an antigen-antibody pair, and a guanine-rich single-strand DNA label, in combination with oligonucleotide sensing, was used to amplify the detection signal with "direct" relationship to the analyte. As a result, coumaphos was sensitively determined from the enhanced catalytic cycle of guanine-Ru(bpy)(3)(2+) by chronoamperometry. The limit of detection (LOD) was down to 0.18 ng L(-1) (S/N = 3), which is equal to 49.6 amol in a sample solution of 100 μL. In comparison with conventional methods, the proposed method has the lowest LOD and better accessibility to high-throughput sensing systems. Besides, it can complete the whole analysis process in under 50 min and exhibits good performance of excellent selectivity to the OPs. With regard to the advantages of rapidity, convenience, low cost, and ease of operation, the proposed method has provided a promising platform capable of fast and in-field OP detection, which may make the system promising for potential applications in the detection of other small molecules.

Production of the polyclonal antibody against Sudan 3 and Immunoassay of Sudan dyes in food samples

In this study, 4-aminophenylacetic acid was covalently coupled to aniline to synthesize an intermediate hapten and the intermediate hapten was coupled to β-naphthol to synthesize a tentative hapten of Sudan 3. The hapten was coupled to bovine serum albumin as the immunogen to produce the polyclonal antibody. The obtained antibody was highly specific to Sudan 3, Sudan 1, and Para red, but showed relative low binding ability to Sudan 2, Sudan 4, and Sudan red G. After evaluation of different coating antigens, a heterologous indirect competitive immunoassay was developed to multidetermine the six red dyes in food samples. The cross reactivities to the six analytes were in a range of 21-105%, and the limits of detection were in a range of 0.1-0.8 ng/mL depending on the compound. Intra- and interassay recoveries from the standard fortified blank samples were in a range of 74.5-96.3% with coefficients of variation lower than 15.1%.

Development of a Specifically Enhanced Enzyme-Linked Immunosorbent Assay for the Detection of Melamine in Milk

An indirect competitive enzyme-linked immunosorbent assay (icELISA) with enhanced specificity for melamine in milk was developed. Three haptens of melamine with different spacer-arms were used to prepare different plate coating antigens. It was found that the icELISA show best sensitivity and specificity to melamine when using the coating antigen prepared by coupling 3-(4,6-diamino-1,6-dihydro-1,3,5-triazin-2-ylthio)propanoic acid (Hapten C) with ovalbumin (OVA). The 50% inhibitory concentration (IC₅₀) value was 35.4 ng·mL⁻¹, the limit of detection (LOD) was 8.9 ng·mL⁻¹ and the detectable working range (20–80% inhibitory concentration) was from 14.9 to 108.5 ng·mL⁻¹, respectively. Compared to the ELISA results previously reported, the developed icELISA in the present study showed a much lower cross-reactivity to cyromazine, a fly-killing insecticide widely used in vegetables and stables. Recoveries obtained from milk samples in this study were in agreement with those obtained using the HPLC-MS method, indicating the detection performance of the icELISA could meet the requirement of the residue limit set by the Codex Alimentarius Commission. Therefore, the developed immunoassay can be applied for the analysis of melamine presented in milk.

Ultrasensitively sensing acephate using molecular imprinting techniques on a surface plasmon resonance sensor

An ultrathin molecularly imprinted polymer film was anchored on an Au surface for fabricating a surface plasmon resonance sensor sensitive to acephate by a surface-bound photo-radical initiator. The polymerization in the presence of acephate resulted in a molecular-imprinted matrix for the enhanced binding of acephate. Analysis of the SPR wavenumber changes in the presence of different concentrations of acephate gave a calibration curve that included the ultrasensitive detection of acephate by the imprinted sites in the composite, K(ass) for the association of acephate to the imprinted sites, 7.7×10(12) M(-1). The imprinted ultrathin film revealed impressive selectivity. The selectivity efficiencies for acephate and other structurally related analogues were 1.0 and 0.11-0.37, respectively. Based on a signal to noise ratio of 3, the detection limits were 1.14×10(-13) M for apple sample and 4.29×10(-14) M for cole sample. The method showed good recoveries and precision for the apple and cole samples spiked with acephate solution. This suggests that a combination of SPR sensing with MIP film is a promising alternative method for the detection of organophosphate compounds.

Development of a Mab-based heterologous immunoassay for the broad-selective determination of organophosphorus pesticides

A broad-selective monoclonal antibody (Mab) for organophosphorus (OP) pesticides was raised using heterologous indirect enzyme-linked immunosorbent assay (ELISA) to screen hybridomas. On the basis of this Mab, five coating antigens were used to develop homologous and heterologous indirect competitive ELISAs. With the most suitable competitor, a sensitive and broad-selective ELISA was developed. The IC(50) values were estimated to be 20.32 ng/mL for parathion, 21.44 ng/mL for methyl-parathion, 42.15 ng/mL for fenitrothion, and 58.85 ng/mL for isocarbophos. Spike recoveries were between 70.52 and 103.27% for the detection of single pesticide residues of the four OP pesticides in purple-clayed paddy soil. Moreover, the chosen ELISA was then applied to the detection of mixtures of parathion and methyl-parathion in soil samples. The average recovery and coefficient of variation were 80.91 and 4.82%, respectively. Results proved that this broad-selective ELISA would be useful for the multiresidue determination of OP pesticides.