Ambient ionization mass spectrometry: A tutorial

Low-cost heat assisted ambient ionization source for mass spectrometry in food and pharmaceutical screening

Ambient Ionization Mass Spectrometry (AI-MS) techniques have revolutionized analytical chemistry by enabling rapid analysis of samples under atmospheric conditions with minimal to no preparation. In this study, the optimization of a cold atmospheric plasma for the analysis of food and pharmaceutical samples, liquid and solid, using a Heat-Assisted Dielectric Barrier Discharge Ionization (HA-DBDI) source is described. A significant enhancement in analyte signals was observed when a heating element was introduced into the design, potentially allowing for greater sensitivity. Furthermore, the synergy between the inlet temperature of the mass spectrometer and the heating element allows for precise control over the analytical process, leading to improved detection sensitivity and selectivity. Incorporating computational fluid dynamic (CFD) simulations into the study elucidated how heating modifications can influence gas transport properties, thereby facilitating enhanced analyte detection and increased signal intensity. These findings advance the understanding of HA-DBDI technology and provide valuable insights for optimizing AI-MS methodologies for a wide range of applications in food and pharmaceutical analysis.

Assessment of atmospheric solids analysis probe as a tool for the rapid determination of drug purity

The ability to determine the purity (% controlled compound) of drug-of-abuse samples is necessary for public health and law enforcement. Here, we describe the assessment of atmospheric solids analysis probe (ASAP) for the rapid determination of drug purity for a set of formulated pharmaceuticals, chosen due to their availability, uncontrolled status and consistency. Paracetamol and loratadine were used as models of high and low purity compounds being ~90% and ~10% active ingredient, respectively. Individual tablets were ground up and diluted in an internal standard solution. The resulting samples were analysed by ASAP coupled to a Waters QDa mass spectrometer followed by confirmatory testing by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The inclusion of a non-matched internal standard (quinine) improved linearity and repeatability of drug analysis by ASAP-MS. Levels of drug purity using formulated pharmaceutical tablets were found to be highly comparable with results produced by the 'gold standard' LC-MS/MS technique. Rapid determination of drug purity is therefore possible with ASAP-MS for highly concentrated samples with minimal sample preparation. It may be possible to use this deployable system to determine drug purity outside of a laboratory setting.

Protein analysis by desorption electrospray ionization mass spectrometry

This review presents progress made in the ambient analysis of proteins, in particular by desorption electrospray ionization-mass spectrometry (DESI-MS). Related ambient ionization techniques are discussed in comparison to DESI-MS only to illustrate the larger context of protein analysis by ambient ionization mass spectrometry. The review describes early and current approaches for the analysis of undigested proteins, native proteins, tryptic digests, and indirect protein determination through reporter molecules. Applications to mass spectrometry imaging for protein spatial distributions, the identification of posttranslational modifications, determination of binding stoichiometries, and enzymatic transformations are discussed. The analytical capabilities of other ambient ionization techniques such as LESA and nano-DESI currently exceed those of DESI-MS for in situ surface sampling of intact proteins from tissues. This review shows, however, that despite its many limitations, DESI-MS is making valuable contributions to protein analysis. The challenges in sensitivity, spatial resolution, and mass range are surmountable obstacles and further development and improvements to DESI-MS is justified.

High-resolution multi-reflection time-of-flight mass spectrometer with atmospheric pressure interface

RATIONALE

Atmospheric pressure interface multi-reflection time-of-flight mass spectrometry (API-MRTOF-MS) has the potential to be a rapid and high-resolution analytical tool for versatile applications in chemistry, biology, environmental science, and medicine.

METHODS

The ions were reflected in a mass analyzer via electrostatic mirrors and folded flight path. Therefore, flight distances were significantly increased. The ion flight path of the API-MRTOF-MS was extended from meters to over 1 km, and the mass resolution was increased. Furthermore, the mass analysis could be completed at around 10 ms due to the rapid response of TOF-MS.

RESULTS

A high-resolution API-MRTOF-MS approach is successfully developed in this study. The mass resolution could achieve 116 050 (full widths at half maximum [FWHM]) for Cs+ ions using an atmospheric pressure electrospray ionization within a total TOF of only 18 ms. An ion transmission efficiency of over 50% was achieved after 600 cycles.

CONCLUSIONS

The analytical performance of the newly developed API-MRTOF-MS demonstrated that it is suitable for high resolution and rapid analysis in many fields.

Rapid evaporative ionization mass spectrometry: A survey through 15 years of applications

Rapid evaporative ionization mass spectrometry (REIMS) is a relatively recent MS technique explored in many application fields, demonstrating high versatility in the detection of a wide range of chemicals, from small molecules (phenols, amino acids, di- and tripeptides, organic acids, and sugars) to larger biomolecules, that is, phospholipids and triacylglycerols. Different sampling devices were used depending on the analyzed matrix (liquid or solid), resulting in distinct performances in terms of automation, reproducibility, and sensitivity. The absence of laborious and time-consuming sample preparation procedures and chromatographic separations was highlighted as a major advantage compared to chromatographic methods. REIMS was successfully used to achieve a comprehensive sample profiling according to a metabolomics untargeted analysis. Moreover, when a multitude of samples were available, the combination with chemometrics allowed rapid sample differentiation and the identification of discriminant features. The present review aims to provide a survey of literature reports based on the use of such analytical technology, highlighting its mode of operation in different application areas, ranging from clinical research, mostly focused on cancer diagnosis for the accurate identification of tumor margins, to the agri-food sector aiming at the safeguard of food quality and security.

What is the role of current mass spectrometry in pharmaceutical analysis?

The role of mass spectrometry (MS) has become more important in most application domains in recent years. Pharmaceutical analysis is specific due to its stringent regulation procedures, the need for good laboratory/manufacturing practices, and a large number of routine quality control analyses to be carried out. The role of MS is, therefore, very different throughout the whole drug development cycle. While it dominates within the drug discovery and development phase, in routine quality control, the role of MS is minor and indispensable only for selected applications. Moreover, its role is very different in the case of analysis of small molecule pharmaceuticals and biopharmaceuticals. Our review explains the role of current MS in the analysis of both small-molecule chemical drugs and biopharmaceuticals. Important features of MS-based technologies being implemented, method requirements, and related challenges are discussed. The differences in analytical procedures for small molecule pharmaceuticals and biopharmaceuticals are pointed out. While a single method or a small set of methods is usually sufficient for quality control in the case of small molecule pharmaceuticals and MS is often not indispensable, a large panel of methods including extensive use of MS must be used for quality control of biopharmaceuticals. Finally, expected development and future trends are outlined.

Development of a rapid-fire drug screening method by probe electrospray ionization tandem mass spectrometry for human urine (RaDPi-U)

Drug screening tests are mandatory in the search for drugs in forensic biological samples, and immunological methods and mass spectrometry (e.g., gas chromatography-mass spectrometry and liquid chromatography-tandem mass spectrometry) are commonly used for that purpose. However, these methods have some drawbacks, and developing new screening methods is required. In this study, we develop a rapid-fire drug screening method by probe electrospray ionization tandem mass spectrometry (PESI-MS/MS), which is an ambient ionization mass spectrometry method, for human urine, named RaDPi-U. RaDPi-U is carried out in three steps: (1) mixing urine with internal standard (IS) solution and ethanol, followed by vortexing; (2) pipetting the mixture onto a sample plate for PESI; and (3) rapid-fire analysis by PESI-MS/MS. RaDPi-U targets 40 forensically important drugs, which include illegal drugs, hypnotics, and psychoactive substances. The analytical results were obtained within 3 min because of the above-mentioned simple workflow of RaDPi-U. The calibration curves of each analyte were constructed using the IS method, and they were quantitatively valid, resulting in good linearity (0.972-0.999) with a satisfactory lower limit of detection and lower limit of quantitation (0.01-7.1 ng/mL and 0.02-21 ng/mL, respectively). Further, both trueness and precisions were 28% or less, demonstrating the high reliability and repeatability of the method. Finally, we applied RaDPi-U to three postmortem urine specimens and successfully detected different drugs in each urine sample. The practicality of the method is proven, and RaDPi-U will be a strong tool as a rapid-fire drug screening method not only in forensic toxicology but also in clinical toxicology.

μ-PESI-based MS profiling combined with untargeted metabolomics analysis for rapid identification of red wine geographical origin

BACKGROUND

The commercial value of red wine is strongly linked to its geographical origin. Given the large global market, there is great demand for high-throughput screening methods to authenticate the geographical source of red wine. However, only limited techniques have been established up to now.

RESULTS

Herein, a sensitive and robust method, namely probe electrospray ionization mass spectrometry (μ-PESI-MS), was established to achieve rapid analysis at approximately 1.2 min per sample without any pretreatment. A scotch near the needle tip provides a fixed micro-volume for each analysis to achieve satisfactory ion signal reproducibility (RSD < 26.7%). In combination with a machine learning algorithm, 16 characteristic ions were discovered from thousands of detected ions and were utilized for differentiating red wine origin. Among them, the relative abundances of two characteristic metabolites (trigonelline and proline) correlated with geographical conditions (sun exposure and water stress) were identified, providing the rationale for differentiation of the geographical origin.

CONCLUSION

The proposed μ-PESI-MS-based method demonstrates a promising high-throughput determination capability in red wine traceability.

Quantitative Analysis of Three Synthetic Cannabinoids MDMB-4en-PINACA, ADB-BUTINACA, and ADB-4en-PINACA by Thermal-Assisted Carbon Fiber Ionization Mass Spectrometry

Recently, synthetic cannabinoids (SCs) have emerged as new psychoactive substances (NPS) and have been frequently added to e-liquids, leading to their abuse. In order to detect SCs in e-liquids quickly and accurately, a thermal-assisted carbon fiber ionization mass spectrometry technique has been developed. The introduction of a heat source helps to reduce the matrix effects. The results indicate that the ratio of the slope of the matrix curve (e-liquids matrix) and the standard curve (methanol solution) for SCs analysis is close to 1, indicating a minimized matrix effect of this method. Furthermore, this method exhibits good quantitative ability when applied to real samples. It does not require sample pretreatment and is sensitive enough to directly quantify SCs in e-liquids. Our method is characterized by the ability to achieve rapid and direct quantitative analysis with minimized matrix effects. It provides a rapid and simple method for analyzing SCs in e-liquids.

Recent Developments in the Detection of Organic Contaminants Using Molecularly Imprinted Polymers Combined with Various Analytical Techniques

Molecularly imprinted polymers (MIPs) encompass a diverse array of polymeric matrices that exhibit the unique capacity to selectively identify a designated template molecule through specific chemical moieties. Thanks to their pivotal attributes, including exceptional selectivity, extended shelf stability, and other distinct characteristics, this class of compounds has garnered interest in the development of highly responsive sensor systems. As a result, the incorporation of MIPs in crafting distinctive sensors and analytical procedures tailored for specific analytes across various domains has increasingly become a common practice within contemporary analytical chemistry. Furthermore, the range of polymers amenable to MIP formulation significantly influences the potential utilization of both conventional and innovative analytical methodologies. This versatility expands the array of possibilities in which MIP-based sensing can be employed in recognition systems. The following review summarizes the notable progress achieved within the preceding seven-year period in employing MIP-based sensing techniques for analyte determination.

Analysis of Pesticide Residues on Fruit Using Swab Spray Ionization Mass Spectrometry

The vast quantity and high variety of pesticides globally used in agriculture entails considerable risks for the environment and requires ensuring the safety of food products. Therefore, powerful analytical tools are needed to acquire qualitative and quantitative data for monitoring pesticide residues. The development of ambient ionization mass spectrometry methods in the past two decades has demonstrated numerous ways to generate ions under atmospheric conditions and simultaneously to reduce the need for extended sample preparation and circumvent chromatographic separation prior to mass analysis. Swab spray ionization enables the generation of ions directly from swabs via the application of high voltage and solvent flow. In this study, swab sampling of fruit surfaces and subsequent ionization directly from the swab in a modified electrospray ion source was employed for the screening and quantitation of pesticide residues. Aspects regarding sample collection, sampling efficacy on different surfaces, and swab background are discussed. The effect of solvent composition on pesticide-sodium adduct formation and the suppression of ionization by the background matrix have been investigated. Furthermore, a novel approach for the quantitation of pesticide residues based on depletion curve areas is presented. It is demonstrated that swab spray ionization is an effective and quick method for spectral library-based identification and the quantitative analysis of polar contact pesticide residues on food.

Direct analysis in real-time mass spectrometry: Observations of helium, nitrogen and argon as ionisation gas for the detection of small molecules using a single quadrupole instrument

RATIONALE

Direct analysis in real time is typically performed using helium as the ionisation gas for the detection of analytes by mass spectrometry (MS). Nitrogen and argon are found with abundance in the air and provide a cheaper and greener alternative to the use of helium as ionisation gas. This study explores the use of helium, nitrogen and argon as ionisation gas for the detection of organic compounds.

METHODS

Four illicit drugs, two amino acids and five explosives were chosen as target analytes to understand selectivity, sensitivity and linearity when helium, nitrogen or argon was used as the ionisation gas with the direct analysis in real time (DART) source. Analysis was carried out on a Waters Acquity QDa single quadrupole mass spectrometer.

RESULTS

Calibration curves over the range of 5-100 ng were produced for each analyte using the different ionisation gases to assess the instrument response. Nitrogen gave a higher response to concentration than helium or argon; however, the lowest limits of detection were observed when helium was used.

CONCLUSIONS

All the target analytes were detected using DART-MS with helium, nitrogen or argon as the ionisation gas. Whereas helium provided the highest sensitivity, nitrogen produced reasonable limits of detection and had good linearity across the concentration range explored, suggesting it provides a greener and cheaper alternative to helium.

Effect of Dopants and Gas-Phase Composition on Ionization Behavior and Efficiency in Dielectric Barrier Discharge Ionization

Cold plasma-based ionization techniques allow for soft ionization of a wide variety of chemical compounds. In this chemical ionization mechanism, the atmosphere plays a crucial role in ionization. Knowing its influence is critical for the optimization of analysis conditions and interpretation of resulting spectra. This study uses soft ionization by chemical reaction in transfer (SICRIT), a variant of dielectric barrier discharge ionization (DBDI), that allows for a controlled atmosphere to investigate atmosphere and dopant effects. The influence of eight makeup gas compositions (dry nitrogen, room air, and nitrogen-enriched with either water, HCl, MeOH, hexane, NH₃, and fluorobenzene) on the ionization with SICRIT was investigated. Fifteen compound classes, comprising alkanes, polyaromatic hydrocarbons (PAHs), terpenes, oxygen-containing terpenes, alkylphenols, chlorophenols, nitrophenols, trialkylamines, triazines, phthalates with or without ether groups, aldehydes, ketones, fatty acid methyl esters (FAMEs), and polyoxy-methylene ethers (OMEs) were measured via gas chromatography SICRIT high-resolution mass spectrometry (GC-SICRIT-HRMS). The different atmospheres were compared in terms of generated ions, ion intensities and fragmentation during ionization. Measurements of reactant ions were performed for a better understanding of the underlying mechanisms. All 15 compound classes were mostly softly ionized. For most compound classes and atmospheres, protonation is the dominant ionization mode. The highest number of compounds ionized via protonation was observed in dry nitrogen, followed by room air and humid nitrogen. The study should work as a guideline for the choice of atmosphere for specific compound classes and the interpretation of spectra generated under a specific atmosphere.

No skin off your back: the sampling and extraction of sebum for metabolomics

INTRODUCTION

Sebum-based metabolomics (a subset of "sebomics") is a developing field that involves the sampling, identification, and quantification of metabolites found in human sebum. Sebum is a lipid-rich oily substance secreted by the sebaceous glands onto the skin surface for skin homeostasis, lubrication, thermoregulation, and environmental protection. Interest in sebomics has grown over the last decade due to its potential for rapid analysis following non-invasive sampling for a range of clinical and environmental applications.

OBJECTIVES

To provide an overview of various sebum sampling techniques with their associated challenges. To evaluate applications of sebum for clinical research, drug monitoring, and human biomonitoring. To provide a commentary of the opportunities of using sebum as a diagnostic biofluid in the future.

METHODS

Bibliometric analyses of selected keywords regarding skin surface analysis using the Scopus search engine from 1960 to 2022 was performed on 12th January 2023. The published literature was compartmentalised based on what the work contributed to in the following areas: the understanding about sebum, its composition, the analytical technologies used, or the purpose of use of sebum. The findings were summarised in this review.

RESULTS

Historically, about 15 methods of sampling have been used for sebum collection. The sample preparation approaches vary depending on the analytes of interest and are summarised. The use of sebum is not limited to just skin diseases or drug monitoring but also demonstrated for other systemic disease. Most of the work carried out for untargeted analysis of metabolites associated with sebum has been in the recent two decades.

CONCLUSION

Sebum has a huge potential beyond skin research and understanding how one's physiological state affects or reflects on the skin metabolome via the sebaceous glands itself or by interactions with sebaceous secretion, will open doors for simpler biomonitoring. Sebum acts as a sink to environmental metabolites and has applications awaiting to be explored, such as biosecurity, cross-border migration, localised exposure to harmful substances, and high-throughput population screening. These applications will be possible with rapid advances in volatile headspace and lipidomics method development as well as the ability of the metabolomics community to annotate unknown species better. A key issue with skin surface analysis that remains unsolved is attributing the source of the metabolites found on the skin surface before meaningful biological interpretation.

Non-Contact, Continuous Sampling of Porous Surfaces for the Detection of Particulate and Adsorbed Organic Contaminations by Low-Temperature Plasma Coupled to Ion Mobility Spectrometer

Chemical analysis of hazardous surface contaminations, such as hazardous substances, explosives or illicit drugs, is an essential task in security, environmental and safety applications. This task is mostly based on the collection of particles with swabs, followed by thermal desorption into a vapor analyzer, usually a detector based on ion mobility spectrometry (IMS). While this methodology is well established for several civil applications, such as border control, it is still not efficient enough for various conditions, as in sampling rough and porous surfaces. Additionally, the process of thermal desorption is energetically inefficient, requires bulky hardware and introduces device contamination memory effects. Low-temperature plasma (LTP) has been demonstrated as an ionization and desorption source for sample preparation-free analysis, mostly at the inlet of a mass spectrometer analyzer, and in rare cases in conjunction with an ion mobility spectrometer. Herein, we demonstrate, for the first time, the operation of a simple, low cost, home-built LTP apparatus for desorbing non-volatile analytes from various porous surfaces into the inlet of a handheld IMS vapor analyzer. We show ion mobility spectra that originate from operating the LTP jet on porous surfaces such as asphalt and shoes, contaminated with model amine-containing organic compounds. The spectra are in good correlation with spectra measured for thermally desorbed species. We verify through LC-MS analysis of the collected vapors that the sampled species are not fragmented, and can thus be identified by commercial IMS detectors.

Ambient ionization mass spectrometry applied to new psychoactive substance analysis

In the past decade a plethora of drugs with similar effects to controlled psychoactive drugs, like cannabis, amfetamine (amphetamine), or lysergic acid diethylamide, have been synthesized. These drugs can collectively be classified under the term new psychoactive substances (NPS) and are used for recreational purposes. The novelty of the substances, alongside the rapid rate of emergence and structural variability, makes their detection as well as their legal control highly challenging, increasing the demand for rapid and easy-to-use analytical techniques for their detection and identification. Therefore, interest in ambient ionization mass spectrometry applied to NPS has grown in recent years, which is largely because it is relatively fast and simple to use and has a low operating cost. This review aims to provide a critique of the suitability of current ambient ionization techniques for the analysis of NPS in the forensic and clinical toxicology fields. Consideration is given to analytical performance and ease of implementation, including ionization efficiency, selectivity, sensitivity, quantification, analyte chemistry, molecular coverage, validation, and practicality.

Rapid quantification of phenobarbital and barbital in human whole blood by liquid-liquid extraction combined with DART-orbitrap-HRMS

PURPOSE

This study aims to develop and validate a rapid, simple, and efficient bioanalytical method for the simultaneous quantification of phenobarbital and barbital in human whole blood using liquid-liquid extraction combined with direct analysis in real time (DART) and high-resolution mass spectrometry (HRMS).

METHOD

Phenobarbital-d5 and aprobarbital were selected as internal standards (ISs) of phenobarbital and barbital, respectively. A mixed solvent of o-xylene and ethyl acetate at a ratio of 1:6 was used to extract analytes of interest and ISs from 100 μL of human whole blood samples. Phenobarbital and barbital were detected by DART-HRMS. The proposed method has been validated in accordance with United States Food and Drug Administration Guidelines for Bioanalytical Method Validation in terms of selectivity, linearity, accuracy, precision, matrix effect, recovery, stability, and dilution integrity.

RESULTS

The lower limits of quantification (LLOQs) of phenobarbital and barbital were both 10 ng/mL. The linearities were in the range of 10-1000 ng/mL (R² ≥ 0.99). The mean recovery values of phenobarbital and barbital were 99.7% and 88.1%, respectively. The interday and intraday precision values were less than 10.4%, and the interday and intraday accuracy values ranged from 87.6 to 106.7%. Furthermore, the validated method was applied to four cases of phenobarbital poisoning at the Shanghai Institute of Forensic Science.

CONCLUSION

The developed and fully validated method enabled the simultaneous quantification of phenobarbital and barbital in human whole blood and was successfully applied to authentic cases.

Thin layer chromatography/desorption flame-induced atmospheric pressure chemical ionization/mass spectrometry for the analysis of volatile and semi-volatile mixtures

Flame-induced atmospheric pressure chemical ionization (FAPCI) has been used to directly characterize chemical compounds on a glass rod and drug tablet surfaces. In this study, FAPCI was further applied to interface thin layer chromatography (TLC) and mass spectrometry (MS) for mixture analysis.

METHODS

A micro-sized oxyacetylene flame was generated using a small concentric tube system. Hot gas flow and primary reactive species from the micro-flame were directed toward a developed TLC gel plate to thermally desorb and ionize analytes on the gel surface. The resulting analyte ions subsequently entered the MS inlet for detection.

RESULTS

A 1-1.5-mm-wide light-brown line was observed on the TLC plate after the desorption FAPCI/MS (DFAPCI/MS) analysis, revealing that the gel surface withstood a high temperature from the impact of the micro-flame. Volatile and semi-volatile chemical compounds, including amine and amide standards, drugs, and aromatherapy oils, were successfully desorbed, ionized, and detected using this TLC/DFAPCI/MS. The limit of detection of TLC-DFAPCI/MS was determined to be 5 ng/spot for dibenzylamine and ethenzamide.

CONCLUSIONS

TLC/DFAPCI/MS is one of the simplest TLC-MS interfaces showing the advantages such as low costs and an easy set up. The technique is useful for characterizing thermally stable volatile and semi-volatile compounds in a mixture.

Focusing Plasma Desorption/Ionization Mass Spectrometry

A plasma-based source named focusing plasma desorption/ionization (FPDI) is described, which applies a high direct current voltage between a metal wire inside a polymeric hollow truncated cone and a piece of a one-sided coated conducting paper substrate. The conducting paper acts as both the counter electrode and the sample carrier. Upon the generation of a visible plasma beam, it would directly ionize the samples spotted on the conducting paper substrate or located around the plasma beam. The signal intensity of target analytes in mass spectrometric analysis is dependent highly on whether the conducting paper substrate is grounded or not, the type of conducting paper substrate, the inside diameter of the polymeric hollow truncated cone tip, the metal wire tip-to-polymer tip distance, the polymer tip-to-paper substrate distance, the applied voltage, and the helium flow rate. Based on the experimental observation, a plausible mechanism is proposed for the generation of the plasma beam from FPDI. Compared to the available low-temperature plasma, flowing atmospheric-pressure afterglow, and helium plasma ionization sources, FPDI has demonstrated higher sensitivity and better compatibility with commercial mass spectrometers without any extra power supplies. As a proof of concept, FPDI coupled with a mass spectrometer has also been applied for the discrimination of different brands of gasoline and determination of solid tablets and pesticides with limits of detection in the range of 2.2 to 30.7 ng mL^-1.

Enhanced microfluidic open interface for the direct coupling of solid phase microextraction with liquid electron ionization-tandem mass spectrometry

Solid-phase microextraction (SPME) directly coupled to MS is a widespread technique for determining small molecules in different matrices in many application fields. Here we present a modified microfluidic open interface (MOI) connected to a passive-flow-splitter device (PFS) for the direct coupling of SPME to a liquid-electron ionization (LEI) interface in a tandem mass spectrometer for the analysis of complex biological samples. No chromatographic separation is involved. The new MOI-PFS configuration was designed to speed up the sample transfer to MS, improving the signal-to-noise ratio and peak shape and leading to fast and sensitive results. MOI-PFS-LEI-MS/MS experiments were conducted using fentanyl as a model compound in water and blood serum. The method uses a C18 Bio-SPME fiber by direct immersion (3 min) in 300 µL of the sample followed by rapid desorption (1 min) in a flow isolated volume (MOI chamber, 2.5 µL) filled with 100% acetonitrile. The PFS permits the rapid transfer of a fraction of the sample into the MS via the LEI interface. The optimal conditions were obtained at a flow rate of 10 µL·min^-1 and a 1:20 split ratio. Altogether, extraction, desorption, and analysis require approximately 5 min. Good interday and intraday precision, excellent linearity and LOQs in the µg·L^-1 range were obtained for fentanyl in water and serum. Greenness evaluation demonstrated a limited environmental impact of this technique.

Thermogravimetry combined with electrospray and atmospheric pressure chemical ionization mass spectrometry for characterization of synthetic polymers

RATIONALE

Thermogravimetry (TG) combined with electrospray and atmospheric chemical ionization (ESI+APCI) mass spectrometry (MS) was developed to rapidly characterize thermal decomposition products of synthetic polymers and plastic products. The ESI-based TG-MS method is useful for characterizing thermally labile, nonvolatile, and polar compounds over an extensive mass range; and the APCI-based TG-MS counterpart is useful for characterizing volatile and nonpolar compounds. Both polar and nonpolar compounds can be simultaneously detected by ESI+APCI-based TG-MS.

METHODS

Analytes with different volatility were produced from TG operated at different temperatures, which were delivered through a heated stainless-steel tube to the ESI+APCI source where they reacted with the primary charged species generated from electrospray and atmospheric pressure chemical ionization (ESI+APCI) of solvent and nitrogen. The analyte ions were then detected by an ion trap mass spectrometer.

RESULTS

A semi-volatile PEG 600 standard was used as the sample and protonated and sodiated molecular ions together with adduct ions including [(PEG)n + 15]⁺ , [(PEG)n + 18]⁺ , and [(PEG)n + 29]⁺ were detected by TG-ESI+APCI-MS. The technique was further utilized to characterize thermal decomposition products of nonvolatile polypropylene glycol (PPG) and polystyrene (PS) standards, as well as a PS-made water cup and coffee cup lid. The characteristic fragments of PPG and PS with mass differences of 58 and 104 between respective ion peaks were detected at the maximum decomposition temperature (T_max ).

CONCLUSIONS

The information obtained from the TG-ESI+APCI-MS analysis is useful in rapidly distinguishing different types of polymers and their products. In addition, the signals of the additives in the polymer products, including antioxidants and plasticizers, were also detected before the TG temperature reached T_max .

Aperture Size Influences Oxidation in Positive-Ion Nitrogen Direct Analysis in Real Time Mass Spectrometry

Direct Analysis in Real Time (DART) mass spectrometry commonly uses helium as the DART gas. With the looming helium shortage, other gases are being evaluated for DART. Nitrogen is inexpensive and readily available, making it a desirable alternative. However, NO⁺ reagent ions present in positive-ion nitrogen DART result in extensive oxidation for many compounds. The DART source uses a ceramic insulator cap to protect the operator from electrical shock. The most common cap has an aperture with a 2.5 mm inner diameter, through which the gas exits the DART source. By using a cap with a narrow (0.5 mm) ID, oxidation can be significantly reduced for nitrogen DART. The 0.5 mm cap is hypothesized to reduce back-diffusion of atmospheric oxygen into the DART source, with a reduction in the relative abundance of NO⁺ and increase in the relative abundance of [(H₂O)₂ + H]⁺ as the reactive species responsible for ionization of the analytes.

Characterization of effective phytochemicals in traditional Chinese medicine by mass spectrometry

Traditional Chinese medicines (TCMs) have been widely used in clinical and healthcare applications around the world. The characterization of the phytochemical components in TCMs is very important for studying the therapeutic mechanism of TCMs. In the analysis process, sample preparation and instrument analysis are key steps to improve analysis performance and accuracy. In recent years, chromatography combined with mass spectrometry (MS) has been widely used for the separation and detection of trace components in complex TCM samples. This article reviews various sample preparation techniques and chromatography-MS techniques, including the application of gas chromatography-MS and liquid chromatography-MS and other MS techniques in the characterization of phytochemicals in TCM materials and Chinese medicine products. This article also describes a new ambient ionization MS method for rapid and high-throughput analysis of TCM components.

A validated method for the rapid quantification of melatonin in over-the-counter hypnotics by the atmospheric pressure solid analysis probe (ASAP)

Melatonin is a hormone that regulates the biological day and night cycle. It is mainly produced by the pineal gland during the night. People suffering from insomnia use it as a soporific drug. The aim of this study was to develop a method for the rapid quantification of melatonin in hypnotics. For that purpose, atmospheric pressure solid analysis probe-assisted mass spectrometry was applied, where no chromatographic separation is needed. Thereby, one single analysis takes less than 1 min. Reference measurements were performed with ultra-high-performance liquid chromatography coupled with a quadrupole-time-of-flight mass spectrometer. Both methods were validated and real sample extracts were tested. The coefficients of determination were above 0.97 for both methods. The limits of detection and quantification were below 1 mg kg^-1. Both methods gave comparable results. Moreover, the content of melatonin differed from the specified value in many samples. The highest and lowest observed deviations were 78% and 1%, respectively.

Routine analysis of pesticides in foodstuffs: Emerging ambient ionization mass spectrometry as an alternative strategy to be on your radar

Pesticides residues in foodstuffs are longstanding of great concern to consumers and governments, thus reliable evaluation techniques for these residues are necessary to ensure food safety. Emerging ambient ionization mass spectrometry (AIMS), a transformative technology in the field of analytical chemistry, is becoming a promising and solid evaluation technology due to its advantages of direct, real-time and in-situ ionization on samples without complex pretreatments. To provide useful guidance on the evaluation techniques in the field of food safety, we offered a comprehensive review on the AIMS technology and introduced their novel applications for the analysis of residual pesticides in foodstuffs under different testing scenarios (i.e., quantitative, screening, imaging, high-throughput detection and rapid on-site analysis). Meanwhile, the creative combination of AIMS with high-resolution mass analyzer (e.g., orbitrap and time-of-flight) was fundamentally mentioned based on recent studies about the detection and evaluation of multi-residual pesticides between 2015 and 2021. Finally, the technical challenges and prospects associated with AIMS operation in food industry were discussed.

Qualitative Analysis of Acid Salts with Direct Analysis in Real Time Mass Spectrometry by Conversion to the Free Acid Form

Organic acid salts typically have very low volatility and are not well suited for analysis by Direct Analysis in Real Time mass spectrometry (DART-MS). However, qualitative analysis of organic acid salts by DART can be facilitated by the addition of a strong acid to convert the compounds to the free acid form. Examples are presented here for inorganic salts (sodium and potassium perchlorate) and several organic salts, including three disodium salts and a mixed sodium/potassium salt.

Sulfonamide-Selective Ambient Mass Spectrometry Ion Source Obtained by Modification of an Iron Sheet with a Hydrophilic Molecularly Imprinted Polymer

We have described a sulfonamide-selective ambient ion source coupled with electrospray ionization mass spectrometry (ESI-MS) for selective extraction and determination of trace sulfonamide antibiotics. It is obtained by modifying an iron sheet with a sulfadiazine-templated hydrophilic molecularly imprinted polymer (SF-HMIP). It behaves as both an online extractor and a MS ion source. Five sulfonamide antibiotics, including sulfamethoxazole (SMZ), sulfamerazine (SMR), sulfisoxazole (SIZ), sulfathiazole (ST), and sulfameter (SMD), were chosen to evaluate SF-HMIP coupled with ESI-MS, which showed good linearity in the range of 0.2-1000 ng/mL with correlation coefficient values (R²) over 0.9946. The limits of detection (LODs) for analysis of pure water and honey were in the range of 0.1-0.2 and 0.2-1.5 ng/mL, respectively. Limits of quantitation (LOQs) for analysis of pure water and honey were in the range of 0.3-0.5 and 1.0-5.0 ng/mL, respectively. The results demonstrated that SF-HMIP combined with ESI-MS could be applied for the direct analysis of five trace sulfonamide compounds in honey and pure water with recoveries ranging from 76 to 129%.

Molecular Mapping of Sebaceous Squalene by Ambient Mass Spectrometry

Squalene (SQ), a highly unsaturated sebaceous lipid, plays an important role in protecting human skin. To better understand the role of SQ in clinical medicine, an efficient analytical approach is needed to comprehensively study the distribution of SQ on different parts of the skin. In this study, sebaceous lipids were collected from different epidermal areas of a volunteer with sampling probes. Thermal desorption-electrospray ionization/mass spectrometry (TD-ESI/MS) was then used to characterize the lipid species on the probes, and each TD-ESI/MS analysis was completed within a few seconds without any sample pretreatment. The molecular mapping of epidermal squalene on whole-body skin was rendered by scaling the peak area of the extracted ion current (EIC) of SQ based on a temperature color gradient, where colors were assigned to the 1357 sampling locations on a 3D map of the volunteer. The image showed a higher SQ distribution on the face than any other area of the body, indicating the role of SQ in protecting facial skin. The results were in agreement with previous studies using SQ as a marker to explore sebaceous activity. The novelty and significance of this work are concluded as two points: (1) direct and rapid detection of all major classes of sebaceous lipids, including the unsaturated hydrocarbons (SQ) and nonpolar lipids (e.g., cholesterol). The results are unique compared to other conventional and ambient ionization mass spectrometry methods and (2) this is the first study to analyze SQ distribution on the whole-body skin by a high-throughput approach.

High-throughput bioanalysis of sitagliptin in plasma using direct analysis in real time mass spectrometry and its application in the pharmacokinetic study thereof

Sitagliptin is a dipeptidyl peptidase-IV inhibitor for the treatment of type 2 diabetes mellitus. In the present study, a sensitive and high-throughput quantitative method based on the direct analysis in real time tandem mass spectrometry has been developed and validated for the bioanalysis of sitagliptin in rat plasma without chromatographic separation. Sitagliptin and its internal standard retagliptin were detected in positive ion mode by multiple reaction monitoring transitions at m/z 408.2→235.0 and 465.2→260.1, respectively. The method includes a simple solid-phase extraction sample preparation procedure, through which appropriate and reproducible analytical results within the linear concentration range of 20-2000 ng/mL have been achieved. The intra- and interday precisions were <10.6% and the accuracies were ranging from -8.17 to 2.60%. This method has been successfully applied to the pharmacokinetic study of sitagliptin after single intravenous administration in rats. This approach shows considerable promise of direct analysis in real time tandem mass spectrometry method in the high-throughput bioanalysis.

A Pyrazolo Imine-based Colorimetric and Turn-on Fluorescent Sensor Probe for Determination of Hg2+ Ion and its Application in Test Paper Strips

In this work, we synthesized diethylamino substituted pyrazolo imine (3) fluorescent probe for recognition of Hg²⁺ ion.The sensor probe 3 can detect Hg²⁺ by colorimetric method, and there is a 10-fold enhancement in fluorescence response. When the fluorescent probe bound with Hg²⁺ ion, turn-on fluorescence was observed via the coordination. Probe 3 has an excellent selectivity toward Hg²⁺ in the CH₃ CN/H₂ O (8:2, v/v) solution with low limit of detection and high binding association constant of 551 parts per billion (ppb) and 6.6067 × 10⁶  m^-1 for 3+Hg²⁺ , respectively. Furthermore, the formation of 3+Hg²⁺ complex with 1:1 binding mode was evidenced by Job's plot, ¹ H NMR spectroscopy and Mass analysis. In addition, probe 3 is a feasible option to detect Hg²⁺ in various sources of water samples. Bio-imaging experiments have demonstrated that probe 3 can be used to monitor Hg²⁺ in Escherichia coli bacterial cell. The sensor 3 was also used for paper strip application to detect Hg²⁺ ion.

In vivo solid-phase microextraction swab-mass spectrometry for multidimensional analysis of human saliva

Solid phase microextraction (SPME) is one of the most powerful sample preparation techniques for analyte extraction and enrichment from complex matrices. SPME fibers are commonly used to extract analytes from collected samples. Following our recent work on development of in vivo SPME swab that integrates an SPME fiber and a medical swab (Anal Chim Acta, 2020, 1124, 71-77), the multiple SPME fibers inserted into a medical swab (multiple-SPME swab) is further developed to couple with different mass spectrometry (MS) approaches for multidimensional analysis of human saliva in this work. The new features of cotton ball and SPME fiber of multiple-SPME swab are investigated. Biomarker discovery and disease diagnosis using multiple-SPME swab are also demonstrated. The present study shows that direct coupling multiple-SPME swab with different MS-based approaches could be simple and versatile in vivo method to expand the classes of analytes extracted simultaneously from human saliva.

Synergetic effect of laser and micro-fabricated glow discharge plasma in a new ion source for ambient mass spectrometry

A new ambient ionization technique named laser ablation micro-fabricated glow discharge plasma (LA-MFGDP) was developed for mass spectrometry in this study. This technique used low energy laser for sample ablation and ionized sample aerosol with MFGDP in sequence. The combination of laser ablation and MFGDP exhibited a synergetic effect that significantly improved the performance of MFGDP. Experimental results showed that MFGDP dominated the ionization process while laser played the role of desorption in LA-MFGDP. [M+H]⁺ and M⁺ proved that proton transfer reactions and charge transfer reactions were involved in the ionization process, respectively, indicating that the ionization character was the same as MFGDP. LA-MFGDP could analyze less volatile samples that were unable to be detected by MFGDP because laser significantly improved the ionization capability of MFGDP. Strong ion signals were obtained by LA-MFGDP with low sample consumption. The limits of detection (LODs) of LA-MFGDP was as low as three orders of magnitude than that of MFGDP, which demonstrated that LA-MFGDP possessed an outstanding advantage in detecting trace substances. LA-MFGDP was successfully applied to detect pharmaceutical tablets without any pretreatment. Benefited from the excellent performance, LA-MFGDP offers great potential in broadening the application of ambient mass spectrometry.

Real-time authentication of animal species origin of leather products using rapid evaporative ionization mass spectrometry and chemometric analysis

Increasing accounts of fraud and persistent labeling problems have brought the authenticity of leather products into question. In this study, we developed an extremely simplified workflow for real-time, in situ, and unambiguous authentication of leather samples using rapid evaporative ionization mass spectrometry (REIMS) coupled with an electric soldering iron. Initially, authentic leather samples from cattle, sheep, pig, deer, ostrich, crocodile, and snake were used to create a chemometric model based on principal component analysis and linear discriminant analysis algorithms. The validated multivariate statistical model was then used to analyze and generate live classifications of commercial leather samples. In addition to REIMS analysis, the microstructures of leathers were characterized by scanning electron microscopy to provide complementary information. The current study is expected to provide a high-throughput tool with superior efficiency and accuracy for authenticating the identity of leathers and other consumer products of biogenic origin.

Ethnobotany and the Role of Plant Natural Products in Antibiotic Drug Discovery

The crisis of antibiotic resistance necessitates creative and innovative approaches, from chemical identification and analysis to the assessment of bioactivity. Plant natural products (NPs) represent a promising source of antibacterial lead compounds that could help fill the drug discovery pipeline in response to the growing antibiotic resistance crisis. The major strength of plant NPs lies in their rich and unique chemodiversity, their worldwide distribution and ease of access, their various antibacterial modes of action, and the proven clinical effectiveness of plant extracts from which they are isolated. While many studies have tried to summarize NPs with antibacterial activities, a comprehensive review with rigorous selection criteria has never been performed. In this work, the literature from 2012 to 2019 was systematically reviewed to highlight plant-derived compounds with antibacterial activity by focusing on their growth inhibitory activity. A total of 459 compounds are included in this Review, of which 50.8% are phenolic derivatives, 26.6% are terpenoids, 5.7% are alkaloids, and 17% are classified as other metabolites. A selection of 183 compounds is further discussed regarding their antibacterial activity, biosynthesis, structure-activity relationship, mechanism of action, and potential as antibiotics. Emerging trends in the field of antibacterial drug discovery from plants are also discussed. This Review brings to the forefront key findings on the antibacterial potential of plant NPs for consideration in future antibiotic discovery and development efforts.

Miniaturized sample preparation techniques and ambient mass spectrometry as approaches for food residue analysis

Analytical methods such as liquid chromatography (LC) and mass spectrometry (MS) are widely used techniques for the analyses of different classes of compounds. This is due to their highlighted capacity for separating and identifying components in complex matrices such food samples. However, in most cases, effective analysis of the target analyte becomes challenging due to the complexity of the sample, especially for quantification of trace concentrations. In this case, miniaturized sample preparation methods have been used as a strategy for analysis of complex matrices. This involves removing the interferents and concentrating the analytes in a sample. These methods combine simplicity and effectiveness and given their miniaturized scale, they are in accordance with green chemistry precepts. Besides, ambient mass spectrometry represents a new trend in fast and rapid analyses, especially for qualitative and screening analysis. However, for complex matrix analyses, sample preparation is still a difficult step and the miniaturized sample preparation techniques show great potential for an improved and widespread use of ambient mass spectrometry techniques. . This review aims to contribute as an overview of current miniaturized sample preparation techniques and ambient mass spectrometry methods as different approaches for selective and sensitive analysis of residues in food samples.

Vibrating Sharp-edge Spray Ionization (VSSI) for voltage-free direct analysis of samples using mass spectrometry

RATIONALE

The development of miniaturized and field portable mass spectrometers could not succeed without a simple, compact, and robust ionization source. Here we present a voltage-free ionization method, Vibrating Sharp-edge Spray Ionization (VSSI), which can generate a spray of liquid samples using only one standard microscope glass slide to which a piezoelectric transducer is attached. Compared with existing ambient ionization methods, VSSI eliminates the need for a high electric field (~5000 V·cm-1 ) for spray generation, while sharing a similar level of simplicity and flexibility with the simplest direct ionization techniques currently available such as paper spray ionization (PSI) and other solid substrate-based electrospray ionization methods.

METHODS

The VSSI device was fabricated by attaching a piezoelectric transducer onto a standard glass microscope slide using epoxy glue. Liquid sample was aerosolized by either placing a droplet onto the vibrating edge of the glass slide or touching a wet surface with the glass edge. Mass spectrometric detection was achieved by placing the VSSI device 0.5-1 cm from the inlet of the mass spectrometer (Q-Exactive, ThermoScientific).

RESULTS

VSSI is demonstrated to ionize a diverse array of chemical species, including small organic molecules, carbohydrates, peptides, proteins, and nucleic acids. Preliminary sensitivity experiments show that high-quality mass spectra of acetaminophen can be obtained by consuming 100 femtomoles of the target. The dual spray of VSSI was also demonstrated by performing in-droplet denaturation of ubiquitin. Finally, due to the voltage-free nature and the direct-contact working mode of VSSI, it has been successfully applied for the detection of chemicals directly from human fingertips.

CONCLUSIONS

Overall, we report a compact ionization method based on vibrating sharp-edges. The simplicity and voltage-free nature of VSSI make it an attractive option for field portable applications or analyzing biological samples that are sensitive to high voltage or difficult to access by conventional ionization methods.

Advances in drugs of abuse testing

Drugs of abuse testing is widely used clinically and forensically. Urine is the preferred type of specimen for drugs of abuse screening, but saliva, sweat, hair, and meconium are emerging types of specimens. GC-MS has been used as a gold standard for confirmatory drug testing, but LC-tandem-MS can analyze more diverse types of analytes than GC-MS. Thus, LC-tandem-MS becomes a new gold standard for confirmatory drug testing. Unlike GC-MS, LC-tandem-MS is not suited for non-targeted comprehensive drug screening. But with the advent of high-resolution-MS such as Tof-MS, which can discriminate the compounds of similar molecular masses but with different formulas, LC-hybrid-Tof-MS is usable for non-targeted comprehensive drug screening. Another technical advancement is the advent of miniature ambient ionization MS, which can analyze biological specimens including urine within one minute. Thus these mass spectrometers are promising for rapid drugs of abuse testing in a POC setting.

USB-Powered Coated Blade Spray Ion Source for On-Site Testing Using Transportable Mass Spectrometry

On-site testing in food analysis using mass spectrometry (MS) requires miniaturization of vacuum systems, mass analyzers, sample cleanup, and ionization sources. In this study, a simple coated blade spray (CBS) ion source was developed that enables high voltage generation on the blade by ubiquitous certified (micro-)USB On-The-Go devices like smartphones, tablets, and power banks. CBS is capable of performing both analyte enrichment by solid-phase microextraction (SPME) material coated on the metal substrate and direct-spray ionization. The USB-CBS device was used on two different MS systems, a transportable single-quadrupole and a benchtop triple-quadrupole tandem MS. Various characteristics of the USB-CBS device, including high voltage generation and angular positioning, were studied. The potential of the newly developed device for food safety applications is demonstrated by banned and regulated veterinary drugs such as β-agonists and sulfonamide antibiotics, covering a wide range of molecular weights and polarities. The results highlight the potential of the developed, simplified, inexpensive (less than 10 USD), and universal vendor-independent USB-powered CBS ion source coupled with MS(/MS) systems for semiquantitative applications, in laboratories, and in future on-site food quality and safety testing. Apart from that, most likely on-site environmental, biomedical, and forensic testing will also benefit from this USB-CBS instrumental development that is compatible with any atmospheric inlet MS system.

Ambient (desorption/ionization) mass spectrometry methods for pesticide testing in food: a review

Ambient mass spectrometry refers to the family of techniques that allows ions to be generated from condensed phase samples under ambient conditions and then, collected and analysed by mass spectrometry. One of their key advantages relies on their ability to allow the analysis of samples with minimal to no sample workup. This feature maps well to the requirements of food safety testing, in particular, those related to the fast determination of pesticide residues in foods. This review discusses the application of different ambient ionization methods for the qualitative and (semi)quantitative determination of pesticides in foods, with the focus on different specific methods used and their ionization mechanisms. More popular techniques used are those commercially available including desorption electrospray ionization (DESI-MS), direct analysis on real time (DART-MS), paper spray (PS-MS) and low-temperature plasma (LTP-MS). Several applications described with ambient MS have reported limits of quantitation approaching those of reference methods, typically based on LC-MS and generic sample extraction procedures. Some of them have been combined with portable mass spectrometers thus allowing "in situ" analysis. In addition, these techniques have the ability to map surfaces (ambient MS imaging) to unravel the distribution of agrochemicals on crops.

Characterization of synthetic dyes for environmental and forensic assessments: A chromatography and mass spectrometry approach

Dyes have become common substances since they are employed in mostly all objects surrounding our daily activities such as clothing and upholstery. Based on the usage and disposal of these objects, the transfer of the dyes to other media such as soil and water increases their prevalence in our environment. However, this prevalence could help to solve crimes and pollution problems if detection techniques are proper. For that reason, the detection and characterization of dyes in complex matrices is important to determine the possible events leading to their deposition (natural degradation, attempts of removal, possible match with evidence, among others). Currently, there are several chromatographic and mass spectrometric approaches used for the identification of these organic molecules and their derivatives with high specificity and accuracy. This review presents current chromatographic and mass spectrometric methods that are used for the detection and characterization of disperse, acid, basic, and reactive dyes, and their derivatives.

Evaluating bioanalytical capabilities of paper spray ionization for abiraterone drug quantification in patient plasma

Paper spray ionization (PSI) is a direct, fast, and low-cost ambient ionization technique which may have clinical utility for qualitative and quantitative analysis of therapeutic drugs and metabolites from patient specimens. We developed and validated a PSI-mass spectrometry (PSI-MS/MS) method according to the US-FDA guidelines for bioanalytical studies to measure the prostate cancer drug abiraterone directly from patient plasma. The established linearity range was 3.1-156.8 ng/mL with a precision (%CV) and an accuracy (%) range of 0.5-10.7 and 93.5-103.2, respectively. The mean internal standard normalized matrix factor for abiraterone was just below 1 with highest %CV of 10.2 at the low-level quality control. In benchmarking the performance of this assay against a published LC-MS/MS assay, we showed they were mostly equivalent, with the exception of accuracy with clinical samples. We found the quantitative values observed for abiraterone measured directly from patient plasma using PSI-MS/MS showed positive bias. Upon investigation, we concluded the increased values were due to summed quantitation of isomeric abiraterone conjugates and metabolites which are separable by LC-MS/MS, but not with the current PSI-MS/MS configuration. Despite demonstrating the utility of PSI-MS/MS for rapid bioanalysis, this study also highlighted a limitation encountered with the direct analysis of abiraterone in clinical samples.

Low-Temperature Plasma Probe Mass Spectrometry for Analytes Separated on Thin-Layer Chromatography Plates: Direct vs Laser Assisted Desorption

Thin-layer chromatography (TLC) is a widespread technique because it allows fast, simple, and inexpensive analyte separations. In addition, direct analysis of the compounds separated on TLC plates via mass spectrometry (MS) has been shown to provide high sensitivity and selectivity while avoiding time-consuming sample extraction protocols. Here, direct desorption low-temperature plasma-mass spectrometry (LTP-MS) as well as diode laser assisted desorption (LD) LTP-MS are studied for direct spatially resolved analysis of compounds from TLC plates. Qualitative and quantitative characterization of amino acids, pharmaceuticals, and structural isomers were performed. The nature of the TLC plate stationary phase was found to have a significant influence, together with the analyte's characteristics, on the desorption efficiency. Tandem MS is shown to greatly improve the limits of detection (LODs). Direct desorption LTP-MS, without external thermal assisted desorption, demonstrates its best performance with cellulose TLC plates (LODs, 0.01 ng/mm² to 2.55 ng/mm²) and restricted performance with normal-phase (NP) TLC plates (several analytes without observable signal). LD LTP-MS, with systematic optimization of irradiance and focal point diameter, is shown to overcome the direct-desorption limitations and reach significantly improved LODs with NP TLC plates (up to ×1000 better). In addition, a wide-ranging characterization of amino acid analytical figures of merit with LD LTP-MS shows that LODs from 84 pg/mm² down to 0.3 pg/mm² are achieved on NP TLC plates.

MASS SPECTROMETRY ANALYSIS OF DRUGS OF ABUSE: CHALLENGES AND EMERGING STRATEGIES

Mass spectrometry has been the "gold standard" for drugs of abuse (DoA) analysis for many decades because of the selectivity and sensitivity it affords. Recent progress in all aspects of mass spectrometry has seen significant developments in the field of DoA analysis. Mass spectrometry is particularly well suited to address the rapidly proliferating number of very high potency, novel psychoactive substances that are causing an alarming number of fatalities worldwide. This review surveys advancements in the areas of sample preparation, gas and liquid chromatography-mass spectrometry, as well as the rapidly emerging field of ambient ionization mass spectrometry. We have predominantly targeted literature progress over the past ten years and present our outlook for the future. © 2020 Periodicals, Inc. Mass Spec Rev.