Development of a simple method for the determination of nitrite and nitrate in groundwater by high-resolution continuum source electrothermal molecular absorption spectrometry

Application of Surface-Modified Nanoclay in a Hybrid Adsorption-Ultrafiltration Process for Enhanced Nitrite Ions Removal: Chemometric Approach vs. Machine Learning

Herein, we report the results of a study on combining adsorption and ultrafiltration in a single-stage process to remove nitrite ions from contaminated water. As adsorbent, a surface-modified nanoclay was employed (i.e., Nanomer^® I.28E, containing 25-30 wt. % trimethyl stearyl ammonium). Ultrafiltration experiments were conducted using porous polymeric membranes (Ultracel^® 10 kDa). The hybrid process of adsorption-ultrafiltration was modeled and optimized using three computational tools: (1) response surface methodology (RSM), (2) artificial neural network (ANN), and (3) support vector machine (SVM). The optimal conditions provided by machine learning (SVM) were found to be the best, revealing a rejection efficiency of 86.3% and an initial flux of permeate of 185 LMH for a moderate dose of the nanoclay (0.674% w/v). Likewise, a new and more retentive membrane (based on PVDF-HFP copolymer and halloysite (HS) inorganic nanotubes) was produced by the phase-inversion method, characterized by SEM, EDX, AFM, and FTIR techniques, and then tested under optimal conditions. This new composite membrane (PVDF-HFP/HS) with a thickness of 112 μm and a porosity of 75.32% unveiled an enhanced rejection efficiency (95.0%) and a lower initial flux of permeate (28 LMH). Moreover, molecular docking simulations disclosed the intermolecular interactions between nitrite ions and the functional moiety of the organonanoclay.

Raman spectroscopy coupled to high-resolution continuum source flame molecular absorption spectrometry for sequential determination of nitrogen species in fertilizers

Raman spectroscopy (RS) was used to identify and quantify different nitrogen species in fertilizers. This is a fast and inexpensive method that requires no extensive sample preparation. Urea and nitrate were determined at 1000 and 1045 cm^-1, respectively. Calibration plots obtained for these analytes showed adequate linearity, with regression coefficients (r) of 0.9989 and 0.9976, respectively. Ammonium was determined by difference after total N determination by high-resolution continuum source flame molecular absorption spectrometry (HR-CS FMAS), which provided a calibration plot with r = 0.9960. The inline coupling of RS and HR-CS FMAS allowed for a fast sequential determination of ammonium, nitrate, and urea, with limits of detection of 0.03 mg/L ammonium, 0.03 mg/L nitrate, and 0.01 mg/L urea. Relative standard deviations were ≤ 11 %, and the external standard calibration method provided accurate results for all analytes determined in certified reference materials, raw materials, and commercial samples of fertilizers. For comparison purposes, all samples were also analyzed by traditional Kjeldahl method. The RS HR-CS FMAS method was further validated by addition and recovery experiments, which provided recoveries in the 93 - 113 % range.

N-compounds speciation analysis in environmental samples using ultrasound-assisted solid-liquid extraction and non-chromatographic techniques

A fast, efficient, and non-chromatographic method was presented in this study for nitrite, nitrate, and p-nitrophenol (N-compounds) extraction and speciation analysis of environmental samples. By applying ultrasound-assisted solid-liquid extraction (USLE), analytes were efficiently extracted from water, soil, or sediment collected in areas of environmental disaster. These analytes were selectively converted to NO_(g) through UV photolysis (NO₃^-), H₂O₂/UV photocatalysis (PNP), and direct conversion (NO₂^-). Following conversion, NO_(g) was separated from the liquid phase and determined by high-resolution continuum source molecular absorption spectrometry (HR-CS MAS). The LODs obtained were 0.097 ± 0.004 mg L^-1 for nitrite, 0.119 ± 0.004 mg L^-1 for nitrate, and 0.090 ± 0.006 mg L^-1 for p-nitrophenol. On applying this speciation method to environmental samples, concentrations were found to be up to 0.99 ± 0.03 mg L^-1 (NO₂^-), 49.80 ± 2.5 mg L^-1 (NO₃^-), and 0.10 ± 0.02 mg L^-1 (PNP). Finally, addition/recovery study of real water, soil, and sediment samples showed 101 ± 2% recovery for NO₂^-, 100 ± 1% for NO₃^-, and 96 ± 5% for PNP.

Fluorescent recognition and selective detection of nitrite ions with carbon quantum dots

The nitrite ion (NO₂^-) is a vital inorganic species that occurs both in natural ecological systems and human bodies. The high concentration of NO₂^- can be harmful for animal and human health. It is important to develop a simple, sensitive, reliable, and economic methodology to precisely monitor NO₂^- in various environmental and biological fields. Thus, a novel nitrite biosensor based on carbon quantum dots (PA-CDs) has been constructed and prepared via a high-efficiency, one-pot hydrothermal route using primary arylamines (PA) such as m-phenylenediamine. The device exhibits bright green fluorescence and a high quantum yield of 20.1% in water. In addition, the PA-CDs also possess two broad linear ranges: 0.05-1.0 μM and 1.0-50 μM with a low detection limit of 7.1 nM. The classical diazo reaction is firstly integrated into the PA-CD system by primary arylamines, which endows the system with high sensitivity and specific selectivity towards nitrite. Importantly, the nanosensor can detect NO₂^- in environmental water and serum samples with high fluorescence recoveries, demonstrating its feasibility in practical applications. This work broadens a new method to fabricate novel nanosensors and provides a prospective application for fluorescent carbon quantum dots (CDs). Graphical abstract.

NiFe-Layered Double Hydroxide Nanosheet Arrays Supported on Carbon Cloth for Highly Sensitive Detection of Nitrite

Excessive uptake of nitrite has been proven to be detrimental to the ecological system and human health. Hence, there is a rising requirement for constructing effective electrochemical sensors to precisely monitor the level of nitrite. In this work, NiFe-layered double hydroxide nanosheet arrays (NiFe-LDH NSAs) have been successfully fabricated on a carbon cloth (CC) substrate via a facile one-pot hydrothermal route. By integrating the collective merits of macroporous CC and NiFe-LDH NSAs such as superior electrical conductivity, striking synergistic effect between the dual active components, enlarged electrochemically active surface area, unique three-dimensional hierarchical porous network characteristics, and fast charge transport and ion diffusion, the proposed NiFe-LDH NSAs/CC architecture can be served as a self-supporting sensor toward nitrite detection. As a consequence, the resulting NiFe-LDH NSAs/CC electrode demonstrates superior nitrite sensing characteristics, accompanied by broad linear range (5-1000 μM), quick response rate (ca. 3 s), ultralow detection limit (0.02 μM), and high sensitivity (803.6 μA·mM^-1·cm^-2). Meanwhile, the electrochemical sensor possesses timeless stability, good reproducibility, and strong anti-interference feature. Importantly, the resulting sensor can determine nitrite level in tap and lake water with high recoveries, suggesting its feasibility for practical applications. These findings show that the obtained NiFe-LDH NSAs/CC electrode holds great prospect in highly sensitive and specific detection of nitrite.

TopBP1 is required at mitosis to reduce transmission of DNA damage to G1 daughter cells

Genome integrity is critically dependent on timely DNA replication and accurate chromosome segregation. Replication stress delays replication into G2/M, which in turn impairs proper chromosome segregation and inflicts DNA damage on the daughter cells. Here we show that TopBP1 forms foci upon mitotic entry. In early mitosis, TopBP1 marks sites of and promotes unscheduled DNA synthesis. Moreover, TopBP1 is required for focus formation of the structure-selective nuclease and scaffold protein SLX4 in mitosis. Persistent TopBP1 foci transition into 53BP1 nuclear bodies (NBs) in G1 and precise temporal depletion of TopBP1 just before mitotic entry induced formation of 53BP1 NBs in the next cell cycle, showing that TopBP1 acts to reduce transmission of DNA damage to G1 daughter cells. Based on these results, we propose that TopBP1 maintains genome integrity in mitosis by controlling chromatin recruitment of SLX4 and by facilitating unscheduled DNA synthesis.