Polypyrrole/montmorillonite nanocomposite as a new solid phase microextraction fiber combined with gas chromatography–corona discharge ion mobility spectrometry for the simultaneous determination of diazinon and fenthion organophosphorus pesticides

Keggin-type polyoxometalate embedded polyvinylidene fluoride for thin film microextraction of organophosphorus pesticides

The present research is the first report on the application of Keggin-type phosphotungstic acid/polyvinylidene fluoride membrane. This compound as a simple, cost-effective and novel sorbent was used for the extraction and pre-concentration of two organophosphorus pesticides in real samples in the thin film solid-phase microextraction (TFME) method. TFME as one of the sub-branches of solid phase microextraction resolves the problems of SPME methods, including their limited absorption capacity. These extraction methods have a high surface-to-volume ratio, which improves their sensitivity compared to other geometries. Under optimal conditions, the limit of detections (LODs), the limit of quantifications (LOQs), and relative standard deviation (RSD) of this method varied in the ranges of 0.29-0.31 μg L-1, 0.96-1.0 μg L-1, and 3.9%-6.2%, respectively. This method showed a linear dynamic range (LDR) of 1.0-500 μg L-1 with a coefficient of determination (r2) above 0.9978. This promising method was used to analyze malathion and diazinon.

Implications of biosensors and nanobiosensors for the eco-friendly detection of public health and agro-based insecticides: A comprehensive review

Biosensors, in particular nanobiosensors, have brought a paradigm shift in the detection approaches involved in healthcare, agricultural, and industrial sectors. In accordance with the global expansion in the world population, there has been an increase in the application of specific insecticides for maintaining public health and enhancing agriculture, such as organophosphates, organochlorines, pyrethroids, and carbamates. This has led to the contamination of ground water, besides increasing the chances of biomagnification as most of these insecticides are non-biodegradable. Hence, conventional and more advanced approaches are being devised for the routine monitoring of such insecticides in the environment. This review walks through the implications of biosensors and nanobiosensors, which could offer a wide range of benefits for the detection of the insecticides, quantifying their toxicity status, and versatility in application. Unique eco-friendly nanobiosensors such as microcantilevers, carbon nanotubes, 3D printing organic materials and nylon nano-compounds are some advanced tools that are being employed for the detection of specific insecticides under different conditions. Furthermore, in order to implement a smart agriculture system, nanobiosensors could be integrated into mobile apps and GPS systems for controlling farming in remote areas, which would greatly assist the farmer remotely for crop improvement and maintenance. This review discusses about such tools along with more advanced and eco-friendly approaches that are on the verge of development and could offer a promising alternative for analyte detection in different domains.

A Review on Electrospinning as Versatile Supports for Diverse Nanofibers and Their Applications in Environmental Sensing

Rapid industrialization is accompanied by the deterioration of the natural environment. The deepening crisis associated with the ecological environment has garnered widespread attention toward strengthening environmental monitoring and protection. Environmental sensors are one of the key technologies for environmental monitoring, ultimately enabling environmental protection. In recent decades, micro/nanomaterials have been widely studied and applied in environmental sensing owing to their unique dimensional properties. Electrospinning has been developed and adopted as a facile, quick, and effective technology to produce continuous micro- and nanofiber materials. The technology has advanced rapidly and become one of the hotspots in the field of nanomaterials research. Environmental sensors made from electrospun nanofibers possess many advantages, such as having a porous structure and high specific surface area, which effectively improve their performance in environmental sensing. Furthermore, by introducing functional nanomaterials (carbon nanotubes, metal oxides, conjugated polymers, etc.) into electrospun fibers, synergistic effects between different materials can be utilized to improve the catalytic activity and sensitivity of the sensors. In this review, we aimed to outline the progress of research over the past decade on electrospinning nanofibers with different morphologies and functional characteristics in environmental sensors.

Silica aerogel modified electrospun polyacrylonitrile as a sorbent for thin-film microextraction of chlorpyrifos from real samples coupled with corona discharge ion mobility spectrometry detection

In this paper, modified polyacrylonitrile/silica aerogel fibers were prepared and used as an adsorbent for thin-film microextraction of chlorpyrifos. The extracted analyte was analyzed by corona discharge ion mobility spectrometry. The electrospinning method was applied for the preparation of polyacrylonitrile fibers. The alkaline hydrolyzation technique was used to modify the electrospun film surface. Silica aerogel was synthesized on the surface of modified electrospun polyacrylonitrile fibers by the in situ growth technique. To access a high extraction yield, effective synthesis and extraction parameters such as NaOH concentration, reaction temperature and time, thin-film pretreatment, gelation time, solution pH, ionic strength, and extraction time were studied. The linearity range and the limit of detection of the method were 1-100 μg L^-1 and 0.3 μg L^-1, respectively. The precision of the method was 4 and 12% for the concentration levels of 5 and 60 μg L^-1, respectively. Chlorpyrifos was successfully determined by the method in well water, river water, agricultural wastewater, and tangerine samples.

Application of a needle trap device packed with a MIP@MOF nano-composite for efficient sampling and determination of airborne diazinon pesticide

In this research, a novel, selective, and efficient porous adsorbent nano-composite comprising a molecularly imprinted polymer and a metal-organic framework (MIP@MOF) was employed for sampling, extraction and analysis of diazinon from the air by a needle trap device (NTD), for the first time. The synthesized MIP@MOF sorbent was characterized by the FT-IR, XRD, FE-SEM, TEM, and EDS techniques. Then, the effective parameters of the sampling (temperature and humidity) and desorption (time and temperature) process were optimized by response surface methodology (RSM). The optimum values of temperature and humidity of the sampling chamber were estimated to be 20 °C and 25.0%, respectively. Also, the highest response during the analyte desorption was obtained at 262 °C and 4.5 minutes. For more details, the performance of the MIP@MOF:NTD method was evaluated by determination of important parameters such as repeatability, reproducibility, the limit of detection (LOD), and the limit of quantification (LOQ), and then compared with the NIOSH 5600 standard method. The values of LOD and LOQ for the targeted analyte were determined to be 0.02 and 0.1 μg m-3, respectively. Also, the repeatability and reproducibility of the proposed method were obtained in the range of (3.9-5.1)% and (5.1-6.4)%, respectively, which proved the acceptable precision of the method. Furthermore, the results of this study exhibited a high correlation coefficient (R 2 = 0.9781) between the proposed method and the recommended NIOSH method. Finally, the proposed procedure was utilized for sampling and determination of the airborne diazinon in real conditions. These results indicated that the proposed MIP@MOF:NTD method can be employed as a fast, simple, environmentally friendly, selective, and effective procedure for sampling and determining diazinon in air.

Application of gas chromatography-ion mobility spectrometry in the analysis of food volatile components

Gas chromatography-ion mobility spectrometry (GC-IMS) is an emerging analytical technique that has the advantages of fast response, high sensitivity, simple operation, and low cost. The combination of the fast speed and resolution of GC with the high sensitivity of IMS makes GC-IMS play an important role in the detection of food volatile substances. This paper focuses on the basic principles and future development trend, and the comparative analysis of the functions, similarities and differences of GC-IMS, GC-MS and electronic nose in the detection of common volatile compounds. A comprehensive introduction to the main application of GC-IMS in food volatile components: fingerprint identification of sample differences and detection of characteristic compounds. On the basis of perfecting the spectral library, GC-IMS will have broad development prospects in food authentication, origin identification, process optimization and product classification, especially in the analysis and identification of trace volatile food flavor substances.

Chitosan and dicationic ionic liquid intercalated clay-coated solid-phase microextraction fiber for determination of sixteen polycyclic aromatic hydrocarbons in coffee and tea samples

In the present study, solid-phase microextraction (SPME) fiber was prepared by coating clay (MMT)-chitosan (CH) and dicationic ionic liquid (DIL) onto the stainless-steel wire step by step. The characterization of fibers was performed by Fourier transform infrared spectroscopy, thermal analysis, x-ray diffraction analysis, and scanning electron microscopy. The prepared fibers were evaluated for separation and determination of 16 polycyclic aromatic hydrocarbons (PAHs) in coffee and tea samples in headspace- and direct immersion-SPME by coupling with gas chromatography/mass spectrometry. The analytical performance of MMT/CH/DIL fibers was carried out for the extraction of PAHs and compared with the performance of carboxen/polydimethylsiloxane (CAR/PDMS) and divinylbenzene/CAR/PDMS (DVB/CAR/PDMS) fibers under optimized conditions. The wider linear ranges between 0.001 and 25 μg L^-1 with a coefficient of determination above 0.9962, low limits of detection between 0.0001 and 0.05 μg L^-1 and good intra-day repeatability from 2.45 to 6.48 % and fiber-to-fiber reproducibility from 3.19 % to 8.82 % were obtained for all PAHs in both methods with MMT/CH/octyl (O)-DIL fiber. The extraction recoveries of coffee and tea samples ranged from 87.5 to 112 % using the MMT/CH/O-DIL fiber in both SPME methods.

Utilization of montmorillonite nanocomposite incorporated with natural biopolymers and benzyl functionalized dicationic imidazolium based ionic liquid coated fiber for solid-phase microextraction of organochlorine pesticides prior to GC/MS and GC/ECD

A novel montmorillonite clay (MMT) bionanocomposite modified with chitosan (CH), carboxymethyl cellulose (CMC), and benzylimidazolium based dicationic ionic liquid with tetraethylene glycol linker (DIL) was fabricated on stainless steel wire by in situ process. The MMT-CH-CMC-DIL coated solid-phase microextraction (SPME) fiber was examined for the determination of organochlorine pesticides (OCPs) in real samples by HS-SPME-GC method using mass spectrometry (MS) and electron capture detector (ECD). Under optimized conditions, the proposed method exhibited low limits of detection (0.5 ng L^-1 with MS and 0.1 ng L^-1 with ECD detection), good linearities (R² = 0.9972-0.9993 with MS and 0.9987-0.9998 with ECD detection), favorable single-fiber repeatability, and fiber-to-fiber reproducibility (less than 8.2% and 9.9% for both types of detection) and high reusability around 125 cycles. Recovery studies were carried out for OCPs in tap water, green tea, and milk samples to verify the applicability of the developed SPME-GC method.

Two in One: A Dinuclear Ru(II) Complex for Deep-Red Light-Emitting Electrochemical Cells and as an Electrochemiluminescence Probe for Organophosphorus Pesticides

The emissive properties of two Ru(II) complexes, [Ru(dmbipy)₂L₁][PF₆]₂ (1) and [Ru₂(dmbipy)₄L₂][PF₆]₄ (2), (where L₁ and L₂ are π-extended phenanthroline-based ligands and dmbipy = 4,4'-dimethyl-2,2'-bipyridine) have been explored for dual applications, namely, deep-red light-emitting electrochemical cells (LECs) and electrochemiluminescence (ECL) sensors for the detection of organophosphorus pesticides (OPs) that include chlorpyrifos (CPS). A simple single-layer deep-red LEC device comprising 2 is reported that outperforms both its mononuclear derivative 1 and all previously reported dinuclear LECs, with a maximum brightness of 524 cd/m², an external quantum efficiency of 0.62%, and a turn-on voltage of 3.2 V. Optoelectronic studies reveal that the ECL response of 2 is improved when compared to its mononuclear counterpart 1 and benchmark [Ru(bipy)₃]²⁺ (3). Modified glassy carbon electrodes coated with 2 are highly sensitive deep-red ECL sensors that facilitate the detection of CPS directly from river water and fruit samples without any complex pretreatment steps, operating over a broad logarithmic concentration range, with a low detection limit.

A BCNO QDs-MnO2 nanosheets based fluorescence "off-on-off" and colorimetric sensor with smartphone detector for the detection of organophosphorus pesticides

In this work, boron carbon oxynitride quantum dots (BCNO QDs) were prepared by a one-step hydrothermal process of ethanolamine and boric acid. BCNO QDs exhibited blue fluorescence with the optimal excitation/emission fluorescence peak at 335 and 420 nm, respectively. As an efficient fluorescence quencher, manganese dioxide (MnO₂) nanosheets can effectively quench the fluorescence of BCNO QDs via the inner filter effect (IFE). Acetylcholinesterase (AChE) catalyzes the hydrolysis of acetylcholine (ATCh) to produce thiocholine (TCh). TCh can reductively degrade MnO₂ nanosheets to generate Mn²⁺, thereby recovering the fluorescence of BCNO QDs. Organophosphorus pesticides (OPs) can inhibit the activity of AChE enzymes, thereby preventing the production of TCh and the decomposition of MnO₂ nanosheets, resulting in the fluorescence "turn-off". Therefore, the concentration of OPs can be detected by measuring the fluorescence intensity change of AChE-ATCh-MnO₂-BCNO-QDs system. Under optimal experimental conditions, the dynamic detection range of paraoxon is 0.1-250 ng mL^-1, and the detection limit is 0.03 ng mL^-1. Meanwhile, the reaction system also showed concentration-dependent visual color changes from colorless to brownish. Furthermore, we prepared a portable BCNO QDs test paper. By using a smartphone to identify the RGB values of the reaction solution and the corresponding test paper, we carried out the digital image chromaticity analysis, which can shorten the detection time and reduce the detection cost, and provide an effective solution for the rapid detection of OPs on site.

Determination of BTEX Compounds in Contaminated Water Using the Novel Vacuum-Assisted-Total Vaporization SPME Method and GO-APTES Fiber

A novel and reliable microextraction technique was used for the fast determination of benzene, toluene, ethylbenzene and xylenes (BTEX) from contaminated water without any extra steps for the preparation or extraction of the aqueous sample. Vacuum-assisted-total vaporization-solid-phase microextraction (SPME) eliminated one of the partitioning steps in conventional headspace SPME and caused an increase in the sensitivity and speed of the method. A home-made graphene oxide/3-aminopropyl-triethoxysilane nanocomposite SPME fiber was synthesized and used as the extraction phase for efficient extraction. Several crucial parameters were optimized, such as the vaporization time and temperature, extraction time and desorption conditions. At the optimum experimental conditions, a linear wide range calibration curve over a wide range of 1-5,000 ng mL-1 and a relative standard deviation (n = 6) of 6.6-7.3% were obtained. The result of the determination of BTEX as a human health risk from real samples, using the proposed method, revealed an acceptable agreement with a valid method.

3D-Printed, Portable, Fluorescent-Sensing Platform for Smartphone-Capable Detection of Organophosphorus Residue Using Reaction-Based Aggregation Induced Emission Luminogens

Development of an easy-to-use, low-cost, household device can help the consumer quickly identify an organophosphorus (OP) residue concentration level. In this work, we demonstrate a 3D-printed, portable, fluorescent-sensing platform for smartphone-capable detection of OPs in vegetables. For development of the proposed device, we utilize the smartphone for capturing the strong thiol-activated fluorescence, which was produced by hydrolysis of OPs in the presence of alkali. The thiol-responsive AIEgen (maleimide-functionalized tetraphenylethylene) was non-emissive in both solution and the solid state but could be readily lighted up by the click addition of thiol to its MI pendant. An android application "Detection" has been developed on the basis of the gray value to analyze the different concentration levels of OPs in vegetable samples. The gray value was linearly related with the concentration of five kinds of organophosphorus residue, ranging from 0 to 20 μg/mL. It was also applied for determination of OPs residue in the leaves of cowpea, celery, and Chinese cabbage. Different from acetylcholinesterase enzyme-based sensors for poor stability under high temperature, the proposed method was a direct detection method for OPs and can be used for rapid monitoring of OPs residue concentration levels before LC-MS analysis.

Organic-Molecule-Based Fluorescent Chemosensor for Nerve Agents and Organophosphorus Pesticides

Organophosphorus (OP) compounds are typically a broad class of compounds that possess various uses such as insecticides, pesticides, etc. One of the most evil utilizations of these compounds is as chemical warfare agents, which pose a greater threat than biological weapons because of their ease of access. OP compounds are highly toxic compounds that cause irreversible inhibition of enzyme acetylcholinesterase, which is essential for hydrolysis of neurotransmitter acetylcholine, leading to series of neurological disorders and even death. Due to the extensive use of these organophosphorus compounds in agriculture, there is an increase in the environmental burden of these toxic chemicals, with severe environmental consequences. Hence, the rapid and sensitive, selective, real-time detection of OP compounds is very much required in terms of environmental protection, health, and survival. Several techniques have been developed over a few decades to easily detect them, but still, numerous challenges and problems remain to be solved. Major advancement has been observed in the development of sensors using the spectroscopic technique over recent years because of the advantages offered over other techniques, which we focus on in the presented review.

In situ growth of copper-based metal-organic framework on a helical shape copper wire as a sorbent in stir-bar sorptive extraction of fenthion followed by corona discharge ion mobility spectrometry

In this paper, a helical copper wire, coated with copper-benzene-1,4-dicarboxylic acid metal-organic framework (Cu-BDC) was used as a sorbent for stir-bar sorptive extraction of fenthion from water and fruit samples. The homogenous coating was fabricated through two simple and fast steps. The chemical conversion of copper substrate to copper hydroxide nanotubes (Cu(OH)₂ NTs) was performed in an alkaline solution and then Cu-BDC was formed through a neutralization reaction. Corona discharge ion mobility spectrometry in positive mode was applied for the detection of fenthion. To improve the sensitivity of the method, some synthesis and extraction parameters affecting the extraction efficiency such as benzene-1,4-dicarboxylic acid concentration, ionic strength, sample pH, stirring rate, extraction temperature, and extraction time were investigated. The linear dynamic range between 0.5 and 80 μg L^-1 and detection limit of 0.1 μg L^-1 were obtained under optimal conditions. The intra- and inter-day relative standard deviations were less than 6.4 and 8.6%, respectively. The applicability of the method was examined for the analysis of different samples (i.e., well water, agricultural wastewater, and orange). The recovery for the determination of fenthion in spiked samples varied from 88 to 111%.

Centrifuge-free dispersive liquid-liquid microextraction coupled with thin-film microextraction for the preconcentration of molinate in real samples by ion mobility spectrometry

A tandem microextraction method, centrifuge free dispersive liquid-liquid microextraction and thin-film microextraction (DLLME-TFME), was used for analyzing molinate in environmental samples by ion mobility spectrometry (IMS). Considering the IMS as a competitive detection system, coupling these two popular sample preparation methods reduces the effect of solvent interference and improves the sensitivity of the technique. Trichloromethane and methanol were used as the extraction, and dispersive solvents for the DLLME method and electrospun polyacrylonitrile/copper-benzene-1,4-dicarboxylic acid fibers were used as a sorbent in the TFME method. Some effective experimental variables influencing the extraction efficiency of an analyte such as type and volume of dispersive and extraction solvents, solution pH, ionic strength, sonication time, and extraction time were studied. The linear dynamic range of 0.5-50 μg L^-1 and the limit of detection of 0.1 μg L^-1 were obtained under optimized conditions. The relative standard deviations for intra-and inter-day analysis were calculated less than 10%. The present method was used for the determination of molinate in different real samples such as agricultural wastewater, well water, river water, and apple, and the recovery was obtained between 82% and 113%, for the spiked samples.

Food safety and quality assessment: comprehensive review and recent trends in the applications of ion mobility spectrometry (IMS)

Ion mobility spectrometry (IMS) is an analytical separation and diagnostic technique that is simple and sensitive and a rapid response and low-priced technique for detecting trace levels of chemical compounds in different matrices. Chemical agents and environmental contaminants are successfully detected by IMS and have been recently considered to employ in food safety. In addition, IMS uses stand-alone or coupled analytical diagnostic tools with chromatographic and spectroscopic methods. Scientific publications show that IMS has been applied 21% in the pharmaceutical industry, 9% in environmental studies and 13% in quality control and food safety. Nevertheless, applications of IMS in food safety and quality analysis have not been adequately explored. This review presents the IMS-related analysis and focuses on the application of IMS in food safety and quality. This review presents the important topics including detection of traces of chemicals, rate of food spoilage and freshness, food adulteration and authenticity as well as natural toxins, pesticides, herbicides, fungicides, veterinary, and growth promoter drug residues. Further, persistent organic pollutants (POPs), acrylamide, polycyclic aromatic hydrocarbon (PAH), biogenic amines, nitrosamine, furfural, phenolic compounds, heavy metals, food packaging materials, melamine, and food additives were also examined for the first time. Therefore, it is logical to predict that the application of the IMS technique in food safety, food quality, and contaminant analysis will be impressively increased in the future. HighlightsCurrent status of IMS for residues and contaminant detection in food safety.To assess all the detected contaminants in food safety, for the first time.Identified IMS-related parameters and chemical compounds in food safety control.

Novel copper sulfide doped titania nanoparticles as a robust fiber coating for solid-phase microextraction for determination of polycyclic aromatic hydrocarbons

Immobilized TiO₂ nanoparticles modified by nanoscale CuS (CuS@TiO₂NPs) were successfully synthesized and used as fibers for solid-phase microextraction (SPME) for the determination of some polycyclic aromatic hydrocarbons (PAHs) in water samples. A novel fiber has been developed by postprecipitation of CuS coated the titania nanoparticles in situ grown on a titanium wire annealed at 550 °C in a nitrogen ambient atmosphere. Its morphology and surface properties were characterized by scanning electron microscopy and energy dispersive X-ray spectrometry. It was connected to high performance liquid chromatography-ultraviolet detector (HPLC-UV) equipment by replacing the sample loop of a six-port injection valve, building the online SPME-HPLC-UV system. Variables affecting extraction procedures, including desorption time, stirring speed, extraction temperature, extraction time and ionic strength were investigated and the parameters were optimized. The SPME fiber exhibits high selectivity for the five PAHs studied. The linear ranges varied between 0.15 μg L⁻¹ and 200 μg L⁻¹ with correlation coefficients ranging from 0.9913 to 0.9985. LODs and LOQs ranged from 0.02–0.04 μg L⁻¹ and 0.07–0.13 μg L⁻¹. RSDs for one fiber and fiber-to-fiber were in the range of 3.2–4.3% and 4.6–6.8%, respectively. Additionally, the fiber possessed advantages such as resistance to organic solvent, high mechanical strength and difficult breakage, making it have strong potential applications in the selective extraction of PAHs from complex water samples at trace levels.

Immobilized TiO₂ nanoparticles modified by nanoscale CuS (CuS@TiO₂NPs) were successfully synthesized and used as fibers for solid-phase microextraction (SPME) for the determination of some polycyclic aromatic hydrocarbons (PAHs) in water samples.

Review: Microextraction Technique Based New Trends in Food Analysis

Food chemistry is the study and classification of the quality and origin of foods. The identification of definite biomarkers and the determination of residue contaminants such as toxins, pesticides, metals, human and veterinary drugs, which are a very common source of food-borne diseases. The food analysis is continuously demanding the improvement of more robust, sensitive, highly efficient, and economically beneficial analytical approaches to promise the traceability, safety, and quality of foods in the acquiescence with the consumers and legislation demands. The traditional methods have been used at the starting of the 20th century based on wet chemical methods. Now it existing the powerful analytical techniques used in food analysis and safety. This development has led to substantial enhancements in the analytical accuracy, precision, sensitivity, selectivity, thereby mounting the applied range of food applications. In the present decade, microextraction (micro-scale extraction) pays more attention due to its futures such as low consumption of solvent and sample, throughput analysis easy to operate, greener, robotics, and miniaturization, different adsorbents have been used in the microextraction process with unique nature recognized with wide range applications.

Trace analysis of organophosphorus pesticide residues in fruit juices and vegetables by an electrochemically fabricated solid-phase microextraction fiber coated with a layer-by-layer graphenized graphite/graphene oxide/polyaniline nanocomposite

Herein, a solid-phase microextraction pencil lead fiber coated with a layer-by-layer graphenized graphite/graphene oxide/polyaniline nanocomposite (GG/GO/PANI) was fabricated by an in situ electrochemical technique for the trace analysis of organophosphorus pesticide residues in packed grape and apple juice and also fresh tomato samples. The effects of various parameters, including the type of desorption solvent, adsorption time, desorption time, pH, salt addition, and stirring rate, on the extraction efficiency of the studied pesticides were investigated and accordingly, these parameters were optimized. The proposed fiber demonstrated desirable linear ranges (0.01-300 μg L-1) with good correlation coefficients (R2 ≥ 0.996) as well as low limits of detection (0.003-0.03 μg L-1) for the studied pesticides. The relative standard deviations (n = 5) for the extraction of 50 μg L-1 of each analyte were less than 7 and 11.5% for inter and intra-day precisions, respectively. This fast, facile, and repeatable electrochemical fabrication method produced a porous and homogeneous coating. The proposed fiber demonstrated good extraction efficiency, high stability, and long life-time despite being low cost. The successful application of the proposed fiber for the trace determination of pesticides in complex food matrices was proven by the satisfactory relative recoveries of 80.7-116.5%.

Ultrasensitive voltammetric and impedimetric aptasensor for diazinon pesticide detection by VS2 quantum dots-graphene nanoplatelets/carboxylated multiwalled carbon nanotubes as a new group nanocomposite for signal enrichment

Polluted water and groundwater resources contaminated by pesticides are among the most important environmental distresses. Therefore, a simple, ultrasensitive, and selective electrochemical aptasensor is proposed for diazinon (DZN) determination as an organophosphorus compound. The vanadium disulfide quantum dots (VS₂QDs) were synthesized by a facile hydrothermal method and doped on the graphene nanoplatelets/carboxylated multiwalled carbon nanotubes (GNP/CMWCNTs) as a new group of nanocomposite. The prepared nanocomposite (VS₂QDs-GNP/CMWCNTs) on a glassy carbon electrode (GCE) was incubated with the DZN binding aptamer (DZBA) through electrostatic interaction (GCE/VS₂QDs-GNP/CMWCNTs/DZBA). The modified electrode was used for the low detection of DZN by monitoring the oxidation of [Fe(CN)6]^3-/4- as the redox probe. The characterizations of the modified electrode were performed by several electrochemical methods include: cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). Also, the prepared nanocomposite was characterized with field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), UV-Vis absorption spectroscopy, fourier transform infrared (FT-IR), fluorescence emission spectroscopy, dynamic light scattering (DLS), elemental mapping, and energy dispersive spectroscopy (EDS). The DZBA selectively adsorbs DZN on the modified electrode, leading to a decrease and increase in the current of DPV and charge transfer resistance (R_CT) of EIS, respectively, as analytical signals. The developed electrochemical aptasensor at the optimal conditions have low limits of detection (LOD) equal to 1.1 × 10^-14 and 2.0 × 10^-15 mol L^-1 with wide dynamic ranges of 5.0 × 10^-14-1.0 × 10^-8 mol L^-1 and 1.0 × 10^-14-1.0 × 10^-8 mol L^-1 for DPV and EIS calibration curves, respectively. Finally, this aptasensor had good selectivity, stability, reproducibility, and feasibility for the DZN detection in various real samples.

Electrospun terpolymeric nanofiber membrane for micro solid-phase extraction of diazinon and chlorpyrifos from aqueous samples

The present study deals with the synthesis and electrospining of a new terpolymer nanofiber in order to determine the amount of diazinon and chlorpyrifos in water and fruit juice samples. The synthesized terpolymer and the prepared nanofiber were characterized using ¹ H NMR spectroscopy, FTIR spectroscopy, scanning electron microscopy, and gel permeation chromatography. The performance of terpolymer nanofiber, prepared as a sorbent for micro solid phase extraction was investigated for the extraction of diazinon and chlorpyrifos from aquaeous media. Then, the target analytes were desorbed from the coating with an organic solvent and analyzed by gas chromatography with flame ionization detector. Extraction efficiencies were significant (>90%) under the optimum condition. The proposed method also demonstrated good linear dynamic ranges for diazinon and chlorpyrifos (3-250 and 5-200 µg/L), and low limit of detections (0.5 and 0.7 µg/L) respectively. Moreover, under optimum condition for extraction of diazinon and chlorpyrifos, square of correlation coefficients (R² ) of 0.9978 and 0.9953 and relative standard deviations of 4.6 and 5.1% were achieved, respectively. The recoveries for diazinon and chlorpyrifos were in the range of 85-97%.

Recent Applications and Newly Developed Strategies of Solid-Phase Microextraction in Contaminant Analysis: Through the Environment to Humans

The present review aims to describe the recent and most impactful applications in pollutant analysis using solid-phase microextraction (SPME) technology in environmental, food, and bio-clinical analysis. The covered papers were published in the last 5 years (2014–2019) thus providing the reader with information about the current state-of-the-art and the future potential directions of the research in pollutant monitoring using SPME. To this end, we revised the studies focused on the investigation of persistent organic pollutants (POPs), pesticides, and emerging pollutants (EPs) including personal care products (PPCPs), in different environmental, food, and bio-clinical matrices. We especially emphasized the role that SPME is having in contaminant surveys following the path that goes from the environment to humans passing through the food web. Besides, this review covers the last technological developments encompassing the use of novel extraction coatings (e.g., metal-organic frameworks, covalent organic frameworks, PDMS-overcoated fiber), geometries (e.g., Arrow-SPME, multiple monolithic fiber-SPME), approaches (e.g., vacuum and cold fiber SPME), and on-site devices. The applications of SPME hyphenated with ambient mass spectrometry have also been described.

Electrochemically Fabricated Solid Phase Microextraction Fibers and Their Applications in Food, Environmental and Clinical Analysis

Background:

Designing an analytical methodology for complicated matrices, such as biological and environmental samples, is difficult since the sample preparation procedure is the most demanding step affecting the whole analytical process. Nowadays, this step has become more challenging by the legislations and environmental concerns since it is a prerequisite to eliminate or minimize the use of hazardous substances in traditional procedures by replacing with green techniques suitable for the sample matrix.

Methods:

In addition to the matrix, the nature of the analyte also influence the ease of creating green analytical techniques. Recent developments in the chemical analysis provide us new methodologies introducing microextraction techniques and among them, solid phase microextraction (SPME) has emerged as a simple, fast, low cost, reliable and portable sample preparation technique that minimizes solvent consumption.

Results:

The use of home-made fibers is popular in the last two decades since the selectivity can be tuned by changing the surface characteristics through chemical and electrochemical modifications. Latter technique is preferred since the electroactive polymers can be coated onto the fiber under controlled electrochemical conditions and the film thicknesses can be adjusted by simply changing the deposition parameters. Thermal resistance and mechanical strength can be readily increased by incorporating different dopant ions into the polymeric structure and selectivity can be tuned by inserting functional groups and nanostructures. A vast number of analytes with wide range of polarities extracted by this means can be determined with a suitable chromatographic detector coupled to the system. Therefore, the main task is to improve the physicochemical properties of the fiber along with the extraction efficiency and selectivity towards the various analytes by adjusting the electrochemical preparation conditions.

Conclusion:

This review covers the fine tuning conditions practiced in electrochemical preparation of SPME fibers and in-tube systems and their applications in environmental, food and clinical analysis.

A sensitive fluorescence assay of organophosphorus pesticides using acetylcholinesterase and copper-catalyzed click chemistry

Organophosphorus pesticides (OPs) are widely used in agricultural fields, but exhibit high toxicity to human beings. A sensitive fluorescence assay for organophosphorus pesticides was developed using the inhibition of acetylcholinesterase (AChE) activity and the copper-catalyzed click chemical reaction. In the click reaction, two hybridized DNA probes can be ligated with copper ions, inducing a fluorescence quenching during the strand displacement reaction. AChE can hydrolyze acetylthiocholine (ATCh) to form thiocholine (TCh) which contains a thiol group. TCh will react with copper ions, blocking the click reaction and a high fluorescence signal is observed. But in the presence of OPs, the activity of AChE is inhibited, releasing a high concentration of copper ions that catalyze the click chemical reaction and resulting in decreased fluorescence signals. Taking advantage of the copper-mediated signal amplification effect, the sensitivity was improved. This assay has also been applied to detect OPs in river water samples with satisfactory results, which demonstrates that the method has great potential for practical applications in environmental protection and food safety fields.

A green triple-locked strategy based on volatile-compound imaging, chemometrics, and markers to discriminate winter honey and sapium honey using headspace gas chromatography-ion mobility spectrometry

A simple and environmentally approach using untargeted imaging of volatile substances combined with chemometrics and markers response was proposed for discriminating different species of honey with headspace gas-chromatography-ion-mobility (HS-GC-IMS). The 3D HS-GC-IMS imaging and their response differences enabled the clear discrimination between winter honey and sapium honey. Principal component analysis (PCA) and partial least-squares discrimination analysis (PLS-DA) were employed to discriminate different honey. Markers of two kinds of honey were identified and confirmed with a user-built imaging database combined with multivariate analysis. Benzaldehyde dimer and phenylacetaldehyde dimer were found to be reliable markers of winter honey, and phenylethyl acetate dimer was of sapium honey. Adulteration identification of the honey samples with different adulteration ratios were subjected to this triple-locked strategy analysis. The results demonstrate that HS-GC-IMS imaging coupled with chemometrics and marker identification is a useful triple-locked strategy to discriminate honey from different floral origins and adulterated honey.

Fast detection of fenthion on fruit and vegetable peel using dynamic surface-enhanced Raman spectroscopy and random forests with variable selection

Dynamic surface-enhanced Raman spectroscopy (D-SERS) based on the state change of the substrate not only significantly enhances but also provides a highly reproducible Raman signal. Hence, we develop a fast and accurate method for the detection of fenthion on fruit and vegetable peel using D-SERS and random forests (RF) with variable selection. With uniform Ag nanoparticles, the dynamic spectra of fenthion solution at different concentrations were obtained using D-SERS, and fenthion solution greater than or equal to 0.05mg/L can be detected. Then, the quantitative analysis models of fenthion were developed by RF with variable selection for spectra of different range. The model of best performance is developed by RF and spectra of characteristic range with higher RF importance (top 40%), and the root mean square error of cross-validation is 0.0101mg/L. Moreover, the fenthion residue of tomato, pear, and cabbage peel were extracted by a swab dipped in ethanol and analyzed using the above method to further validate the practical effect. Compared to gas chromatography, the maximal relative deviation is below 12.5%, and the predicted recovery is between 87.5% and 112.5%. Accordingly, D-SERS and RF with variable selection can realize the fast, simple, ultrasensitive, and accurate analysis of fenthion residue on fruit and vegetable peel.

Trace analysis by ion mobility spectrometry: From conventional to smart sample preconcentration methods. A review

Ion mobility spectrometry (IMS) is a rapid and high sensitive technique widely used in security and forensic areas. However, a lack of selectivity is usually observed in the analysis of complex samples due to the scarce resolution of the technique. The literature concerning the use of conventional and novel smart materials in the pretreatment and preconcentration of samples previous to IMS determinations has been critically reviewed. The most relevant strategies to enhance selectivity and sensitivity of IMS determinations have been widely discussed, based in the use of smart materials, as immunosorbents, aptamers, molecularly imprinted polymers (MIPs), ionic liquids (ILs) and nanomaterial. The observed trend is focused on the development of IMS analytical methods in combination of selective sample treatments in order to achieve quick, reliable, sensitive, and selective methods for the analysis of complex samples such as biological fluids, food, or environmental samples.

Preconcentration of Trace Neonicotinoid Insecticide Residues Using Vortex-Assisted Dispersive Micro Solid-Phase Extraction with Montmorillonite as an Efficient Sorbent

In this work, we investigated montmorillonite for adsorption of neonicotinoid insecticides in vortex-assisted dispersive micro-solid phase extraction (VA-d-μ-SPE). High-performance liquid chromatography with photodiode array detection was used for quantification and determination of neonicotinoid insecticide residues, including thiamethoxam, clothianidin, imidacloprid, acetamiprid, and thiacloprid. In this method, the solid sorbent was dispersed into the aqueous sample solution and vortex agitation was performed to accelerate the extraction process. Finally, the solution was filtered from the solid sorbent with a membrane filter. The parameters affecting the extraction efficiency of the proposed method were optimized, such as amount of sorbent, sample volume, salt addition, type and volume of extraction solvent, and vortex time. The adsorbing results show that montmorillonite could be reused at least 4 times and be used as an effective adsorbent for rapid extraction/preconcentration of neonicotinoid insecticide residues. Under optimum conditions, linear dynamic ranges were achieved between 0.5 and 1000 ng mL^-1 with a correlation of determination (R²) greater than 0.99. Limit of detection (LOD) ranged from 0.005 to 0.065 ng mL^-1, while limit of quantification (LOQ) ranged from 0.008 to 0.263 ng mL^-1. The enrichment factor (EF) ranged from 8 to 176-fold. The results demonstrated that the proposed method not only provided a more simple and sensitive method, but also can be used as a powerful alternative method for the simultaneous determination of insecticide residues in natural surface water and fruit juice samples.

Polypyrrole coated ZnO nanorods on platinum wire for solid-phase microextraction of amitraz and teflubenzuron pesticides prior to quantitation by GC-MS

The authors describe a new sorbent for amitraz and teflubenzuron pesticides. It consists of a platinum wire coated with polypyrrole-coated ZnO nanorods. The nanocomposite was prepared by a two-step process. In the first step, oriented ZnO nanorods were hydrothermally grown in situ on a platinum wire. Subsequently, oxidative vapor phase polymerization of pyrrole was performed on FeCl₃-impregnated ZnO nanorods to give a porous polypyrrole film. The organic/inorganic nanocomposite synthesized through hydrothermal deposition and chemical vapor deposition polymerization yields material with attractive properties. The coated wire was applied to solid-phase microextraction of amitraz (in the form of 2,4-dimethylaniline resulting from the hydrolysis of amitraz) and teflubenzuron. The effects of extraction temperature, extraction time, sample pH value and salt concentration were optimized. The analytes 2,4-dimethylaniline and teflubenzuron were then quantified by GC-MS. Under optimum conditions, the LODs range between 0.1 and 0.15 ng.mL^-1. Relative standard deviations at two concentration are <8.3% for intraday precision and <10.3% for inter-day precision. In all cases, the fiber to fiber reproducibility is <12.2%. For both analytes the linear dynamic ranges are 0.5-300 ng.mL^-1. The procedure was successfully applied to the analysis of spiked agricultural water samples. Graphical abstract A novel inorganic/organic hybrid nanocomposite was synthesized through in situ hydrothermal deposition of ZnO nanorods and ten placing a thin layer of polypyrrole on them by chemical vapor deposition polymerization. This nanocomposite was applied to fabricate a solid-phase microextraction fiber for the extraction of amitraz and teflubenzuron pesticides residue from agricultural samples prior to their quantitation by GC-MS.

The conjunction of a new ultrasonic-assisted dispersive solid-phase extraction method with HPLC-DAD for the trace determination of diazinon in biological and water media

Herein, a new ultrasonic-assisted dispersive solid-phase extraction method was successfully developed for the trace detection of diazinon.