An electrochemical sensor prepared by sonochemical one-pot synthesis of multi-walled carbon nanotube-supported cobalt nanoparticles for the simultaneous determination of paracetamol and dopamine

An on-site and portable electrochemical sensing platform based on spinel zinc ferrite nanoparticles for the quality control of paracetamol in pharmaceutical samples

In this study, crystalline spinel zinc ferrite nanoparticles (ZnFe2O4 NPs) were successfully prepared and proposed as a high-performance electrode material for the construction of an electrochemical sensing platform for the detection of paracetamol (PCM). By modifying a screen-printed carbon electrode (SPE) with ZnFe2O4 NPs, the electrochemical characteristics of the ZnFe2O4/SPE and the electrochemical oxidation of PCM were investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), chronoamperometry (CA), and differential pulse voltammetry (DPV) methods. The calculated electrochemical kinetic parameters from these techniques including electrochemically active surface area (ECSA), peak-to-peak separation (ΔEp), charge transfer resistance (Rct), standard heterogeneous electron-transfer rate constants (k0), electron transfer coefficient (α), catalytic rate constant (kcat), adsorption capacity (Γ), and diffusion coefficient (D) proved that the as-synthesized ZnFe2O4 NPs have rapid electron/mass transfer characteristics, intrinsic electrocatalytic activity, and facilitate the adsorption-diffusion of PCM molecules towards the modified electrode surface. As expected, the ZnFe2O4/SPE offered excellent analytical performance towards sensing of PCM with a detection limit of 0.29 μM, a wide linear range of 0.5-400 μM, and high electrochemical sensitivity of 1.1 μA μM-1 cm-2. Moreover, the proposed ZnFe2O4-based electrochemical nanosensor also exhibited good repeatability, high anti-interference ability, and practical feasibility toward PCM sensing in a pharmaceutical tablet. Based on these observations, the designed electrochemical platform not only provides a high-performance nanosensor for the rapid and highly efficient detection of PCM but also opens a new avenue for routine quality control analysis of pharmaceutical formulations.

Recent Advances in the Use of CoPc-MWCNTs Nanocomposites as Electrochemical Sensing Materials

Cobalt phthalocyanine multiwalled carbon nanotubes (CoPc-MWCNTs), a nanocomposite, are extraordinary electrochemical sensing materials. This material has attracted growing interest owing to its unique physicochemical properties. Notably, the metal at the center of the metal phthalocyanine structure offers an enhanced redox-active behavior used to design solid electrodes for determining varieties of analytes. This review extensively discusses current developments in CoPc-MWCNTs nanocomposites as potential materials for electrochemical sensors, along with their different fabrication methods, modifying electrodes, and the detected analytes. The advantages of CoPc-MWCNTs nanocomposite as sensing material and its future perspectives are carefully reviewed and discussed.

Morphology Effect of Bismuth Vanadate on Electrochemical Sensing for the Detection of Paracetamol

Morphology-control, as a promising and effective strategy, is widely implemented to change surface atomic active sites and thus enhance the intrinsic electrocatalytic activity and selectivity. As a typical n-type semiconductor, a series of bismuth vanadate samples with tunable morphologies of clavate, fusiform, flowered, bulky, and nanoparticles were prepared to investigate the morphology effect. Among all the synthesized samples, the clavate shaped BiVO₄ with high index facets of (112), (301), and (200) exhibited reduced extrinsic pseudocapacitance and enhanced redox response, which is beneficial for tackling the sluggish voltammetric response of the traditional nanoparticle on the electrode surface. Benefiting from the large surface-active area and favorable ion diffusion channels, the clavate shaped BiVO₄ exhibited the best electrochemical sensing performance for paracetamol with a linear response in the range of 0.5–100 µmol and a low detection limit of 0.2 µmol. The enhanced electrochemical detection of paracetamol by bismuth vanadate nanomaterials with controllable shapes indicates their potential for applications as electrochemical sensors.

Ratiometric electrochemical sensing based on Mo2C for detection of acetaminophen

In this work, MoO2 nanoparticles were synthesized and annealed to form Mo2C nanoparticles. This is the first report of a ratiometric electrochemical sensor (R-ECS) for the detection of acetaminophen (AP), in which Mo2C is used as the sensing agent and ferrocene (FC) is used as an internal reference. FC (100 μM) is added directly to the electrolyte solution for convenient operation. The synthesized materials were fully characterized with respect to composition, morphology and electrochemical performance. The oxidation peak potentials of FC (0.196 V) and AP (0.364 V) can be completely separated by the Mo2C modified glassy carbon electrode, and their ratiometric signals are used for the quantification of AP. It was found that the oxidation peak currents of AP at separated potentials on Mo2C/GCE are linear with concentration in the range of 0.5-600 μM, and the detection limit is 0.029 μM (S/N = 3). Mo2C/GCE exhibited decent repeatability, reproducibility, stability, and selectivity. The sensor was then applied to measure AP in tap water and river water.

Simultaneous determination of Acetaminophen and dopamine based on a water-soluble pillar[6]arene and ultrafine Pd nanoparticle-modified covalent organic framework nanocomposite

A novel electrochemical sensing platform for the simultaneous determination of AP and DA based on a water-soluble pillar[6]arene and ultrafine Pd nanoparticle-modified covalent organic framework nanocomposite.

Density Functional Theory-Assisted Electrochemical Assay Manipulated by a Donor-Acceptor Structure toward Pharmaceutical Diagnostic

Oxidative stress is a state of stress injury, which leads to the pathogenesis of most neurodegenerative diseases. Moreover, this is also one of the main reasons for the loss of dopaminergic neurons and the abnormal content of dopamine (DA). In the past decades, a number of studies have found that acetaminophen (AP) is metabolized and distributed in the brain when it is used as a neuroprotective compound. In this context, we proposed an electrochemical sensor based on 9-(4-(10-phenylanthracen-9-yl)phenyl)-9H-carbazole with the goal of diagnosing these two drugs in the body. Carbazole groups can easily be formed into large π-conjugated systems by electropolymerization. The introduction of anthracene exactly combined the carbazole group to establish an efficient electron donor-acceptor pattern, which enhanced π-π interaction with the electrode surface and charge transporting ability. The diagnostic platform showed good sensing activity toward the oxidation of DA and AP. The detection range for DA and AP is from 0.2 to 300 μM and from 0.2 to 400 μM, respectively. The simultaneous detection range is from 0.5 to 250 μM, which is wider than most reports. After a series of electrochemical assessments were determined, the sensor was finally developed to the analysis of pharmaceutical and human serum, displaying a meaningful potential in clinical evaluation.

Chemically modified carbon-based electrodes for the determination of paracetamol in drugs and biological samples

Paracetamol is a non-steroidal, anti-inflammatory drug widely used in pharmaceutical applications for its sturdy, antipyretic and analgesic action. However, an overdose of paracetamol can cause fulminant hepatic necrosis and other toxic effects. Thus, the development of advantageous analytical tools to detect and determine paracetamol is required. Due to simplicity, higher sensitivity and selectivity as well as costefficiency, electrochemical sensors were fully investigated in last decades. This review describes the advancements made in the development of electrochemical sensors for the paracetamol detection and quantification in pharmaceutical and biological samples. The progress made in electrochemical sensors for the selective detection of paracetamol in the last 10 years was examined, with a special focus on highly innovative features introduced by nanotechnology. As the literature is rather extensive, we tried to simplify this work by summarizing and grouping electrochemical sensors according to the by which manner their substrates were chemically modified and the analytical performances obtained.

Photoluminescence as a Valuable Tool in the Optical Characterization of Acetaminophen and the Monitoring of Its Photodegradation Reactions

In this work, new evidence for the photodegradation reactions of acetaminophen (AC) is reported by photoluminescence (PL), Raman scattering and FTIR spectroscopy. Under excitation wavelength of 320 nm, AC shows a PL band in the spectral range of 340-550 nm, whose intensity decreases by exposure to UV light. The chemical interaction of AC with the NaOH solutions, having the concentration ranging between 0.001 and 0.3 M, induces a gradual enhancement of the photoluminescence excitation (PLE) and PL spectra, when the exposure time of samples at the UV light increases until 140 min, as a result of the formation of p-aminophenol and sodium acetate. This behavior is not influenced by the excipients or other active compounds in pharmaceutical products as demonstrated by PLE and PL studies. Experimental arguments for the obtaining of p-aminophenol and sodium acetate, when AC has interacted with NaOH, are shown by Raman scattering and FTIR spectroscopy.

Molecular-scale cage-confinement pyrolysis route to size-controlled molybdenum carbide nanoparticles for electrochemical sensor

Herein, size-controllable molybdenum carbide nanoparticles (Mo₂C NPs) encapsulated by N, P-codoped carbon shells which simultaneously wrapping on the surface of carbon nanotube (Mo₂C@NPC/CNT) is synthesized through a molecular-scale cage-confinement pyrolysis route. Such confinement achieves a good coating and protection of Mo₂C and the effective control over the size of Mo₂C NPs ranging from 2.5 to 10 nm facilitates a rational investigation into their electrochemical sensor behavior at nanometer scales. The optimized structure consisting of Mo₂C nanoparticles with size of ~5 nm showed an outstanding electrochemical response toward dopamine (DA) and acetaminophen (AC) with detection limits (S/N = 3) of 0.008 μM for AC and 0.01 μM for DA.

A novel electrochemical sensing platform for detection of dopamine based on gold nanobipyramid/multi-walled carbon nanotube hybrids

Dopamine homeostasis is an important clinical diagnostic index, because an abnormal level in the human body is closely related to certain serious diseases. Herein, a novel electrochemical sensing platform based on gold nanobipyramid/multi-walled carbon nanotube hybrids (AuNBP/MWCNTs) is developed to detect dopamine in human fluids. Using field emission scanning electron microscopy, it is observed that AuNBPs of about 60 nm with two pyramids are well dispersed on the surface of MWCNTs. Energy-dispersive X-ray spectrometry, X-ray diffraction and X-ray photoelectron spectroscopy confirm that AuNBPs are self-assembled onto the surface of MWCNTs to form the hybrids. Cyclic voltammetry reveals that the AuNBP/MWCNTs exhibit good electrocatalytic activity toward dopamine oxidation owing to the synergistic effects of AuNBPs and MWCNTs. In addition, both cyclic voltammetry and differential pulse voltammetry display three well-resolved and distinct oxidation peaks on the AuNBP/MWCNT-modified glassy carbon electrode. Based on AuNBP/MWCNTs, the newly developed electrochemical sensor is used to detect dopamine in the presence of ascorbic acid and uric acid over a wide linear range from 50 nM to 2.7 mM and a low detection limit of 15 nM (at S/N = 3). The electrochemical sensor can also be applied for the quantitative analysis of dopamine in real samples. Graphical abstract A novel electrochemical sensing platform based on gold nanobipyramid/multi-walled carbon nanotube hybrids (AuNBP/MWCNTs) was proposed to detect dopamine in the presence of ascorbic acid and uric acid.

Biosensors in Drug Discovery and Drug Analysis

Background:

The determination of drugs in pharmaceutical formulations and human biologic fluids is important for pharmaceutical and medical sciences. Successful analysis requires low sensitivity, high selectivity and minimum interference effects. Current analytical methods can detect drugs at very low levels but these methods require long sample preparation steps, extraction prior to analysis, highly trained technical staff and high-cost instruments. Biosensors offer several advantages such as short analysis time, high sensitivity, real-time analysis, low-cost instruments, and short pretreatment steps over traditional techniques. Biosensors allow quantification not only of the active component in pharmaceutical formulations, but also the degradation products and metabolites in biological fluids. The present review gives comprehensive information on the application of biosensors for drug discovery and analysis. Moreover, this review focuses on the fabrication of these biosensors.

Methods:

Biosensors can be classified as the utilized bioreceptor and the signal transduction mechanism. The classification based on signal transductions includes electrochemical optical, thermal or acoustic. Electrochemical and optic transducers are mostly utilized transducers used for drug analysis. There are many biological recognition elements, such as enzymes, antibodies, cells that have been used in fabricating of biosensors. Aptamers and antibodies are the most widely used recognition elements for the screening of the drugs. Electrochemical sensors and biosensors have several advantages such as low detection limits, a wide linear response range, good stability and reproducibility. Optical biosensors have several advantages such as direct, real-time and label-free detection of many biological and chemical substances, high specificity, sensitivity, small size and low cost. Modified electrodes enhance sensitivity of the electrodes to develop a new biosensor with desired features. Chemically modified electrodes have gained attention in drug analysis owing to low background current, wide potential window range, simple surface renewal, low detection limit and low cost. Modified electrodes produced by modifying of a solid surface electrode via different materials (carbonaceous materials, metal nanoparticles, polymer, biomolecules) immobilization. Recent advances in nanotechnology offer opportunities to design and construct biosensors. Unique features of nanomaterials provide many advantages in the fabrication of biosensors. Nanomaterials have controllable chemical structures, large surface to volume ratios, functional groups on their surface. To develop proteininorganic hybrid nanomaterials, four preparation methods have been used. These methods are immobilization, conjugation, crosslinking and self-assembly. In the present manuscript, applications of different biosensors, fabricated by using several materials, for drug analysis are reviewed. The biosensing strategies are investigated and discussed in detail.

Results:

Several analytical techniques such as chromatography, spectroscopy, radiometry, immunoassays and electrochemistry have been used for drug analysis and quantification. Methods based on chromatography require timeconsuming procedure, long sample-preparation steps, expensive instruments and trained staff. Compared to chromatographic methods, immunoassays have simple protocols and lower cost. Electrochemical measurements have many advantages over traditional chemical analyses and give information about drug quantity, metabolic fate of drugs, and pharmacological activity. Moreover, the electroanalytical methods are useful to determine drugs sensitively and selectivity. Additionally, these methods decrease analysis cost and require low-cost instruments and simple sample pretreatment steps.

Conclusion:

In recent years, drug analyses are performed using traditional techniques. These techniques have a good detection limit, but they have some limitations such as long analysis time, expensive device and experienced personnel requirement. Increased demand for practical and low-cost analytical techniques biosensor has gained interest for drug determinations in medical sciences. Biosensors are unique and successful devices when compared to traditional techniques. For drug determination, different electrode modification materials and different biorecognition elements are used for biosensor construction. Several biosensor construction strategies have been developed to enhance the biosensor performance. With the considerable progress in electrode surface modification, promotes the selectivity of the biosensor, decreases the production cost and provides miniaturization. In the next years, advances in technology will provide low cost, sensitive, selective biosensors for drug analysis in drug formulations and biological samples.

All-inorganic perovskite quantum dot/TiO2 inverse opal electrode platform: stable and efficient photoelectrochemical sensing of dopamine under visible irradiation

CsPbX3 (X = Cl, Br or I) perovskite quantum dots (PQDs) have attracted tremendous attention due to their extraordinarily excellent optical properties. However, there is still an obstacle for their bio-application, which is limited by their water-instability. In this work, we have designed a novel visible light triggered photoelectrochemical (PEC) sensor for dopamine (DA) based on CsPbBr1.5I1.5 PQD immobilized three-dimensional (3D) TiO2 inverse opal photonic crystals (IOPCs). Supported by the TiO2 IOPCs, the water-stability of the PQDs as well as that of the PEC sensor was considerably improved. Furthermore, employed as a photoactive material in PEC sensor, CsPbBr1.5I1.5 PQDs can expand the photocurrent response of the PEC sensor to the whole visible region. In addition, the modulation of the photonic stop band effect of TiO2 IOPCs on the incident light and the emission of PQDs could further enhance the photocurrent response. Such a PEC sensor demonstrates sensitive detection of DA in phosphate buffer saline solution and serum, with a good linear range from 0.1 μM to 250 μM and a low detection limit of approximately 0.012 μM. Our strategy opens an alternative horizon for PQD based PEC sensing, which could be more sensitive, convenient and inexpensive for clinical and biological analysis.

Chemical analysis in saliva and the search for salivary biomarkers – a tutorial review

A review of the uses of saliva biomarkers, detection methods and requirements for new biomarkers.

Electrochemical carbon based nanosensors: A promising tool in pharmaceutical and biomedical analysis

Nanotechnology has become very popular in the sensor fields in recent times. It is thought that the utilization of such technologies, as well as the use of nanosized materials, could well have beneficial effects for the performance of sensors. Nano-sized materials have been shown to have a number of novel and interesting physical and chemical properties. Low-dimensional nanometer-sized materials and systems have defined a new research area in condensed-matter physics within past decades. Apart from the aforesaid categories of materials, there exist various materials of different types for fabricating nanosensors. Carbon is called as a unique element, due to its magnificent applications in many areas. Carbon is an astonishing element that can be found many forms including graphite, diamond, fullerenes, and graphene. This review provides an overview of some of the important and recent developments brought about by the application of carbon based nanostructures to nanotechnology for both chemical and biological sensor development and their application in pharmaceutical and biomedical area.

S. B. An electrochemical sensing platform for trace recognition and detection of an anti-prostate cancer drug flutamide in biological samples

Systematic illustration of electrode fabrication.

Multiwalled carbon nanotube supported Schiff base copper complex inorganic nanocomposite for enhanced electrochemical detection of dopamine

A MWCNT/[Cu(sal-ala)bpy] inorganic nanocomposite for the electrochemical detection of dopamine (DA).

A composite material based on nanoparticles of yttrium (III) oxide for the selective and sensitive electrochemical determination of acetaminophen

An electrochemical sensor was prepared by modifying a glassy carbon electrode (GCE) with a composite of yttrium (III) oxide nanoparticles (Y2O3NPs) and carbon nanotubes (CNTs) for the determination of acetaminophen (ACT). Compared with a bare GCE and CNTs/GCE, the Y2O3NPs/CNTs/GCE exhibited a well-defined redox couple for ACT and highly enhanced the current response. The separations in the anodic and cathodic peak potentials (ΔEp) for ACT were 552mV, 24mV and 10mV at ba4re GCE, CNTs/GCE and Y2O3NPs/CNTs/GCE, respectively. The observation of only 10mV of ΔEp for ACT at Y2O3NPs/CNTs/GCE was a clear indication of a great acceleration of the electrode process compared to bare GCE and GCE modified with CNTs. Also, l-ascorbic acid (l-AA) and l-tyrosine (l-TRY) did not interfere with the selective determination of ACT. Square wave voltammetry (SWV) was performed for the quantification of ACT. A linear plot was obtained for current responses versus the concentrations of ACT over the range from 1.0×10(-10) to 1.8×10(-8)M with a detection limit of 3.0×10(-11)M (based on 3Sb/m). The proposed composite material provided high electrocatalytic activity, improved voltammetric behavior, good selectivity and good reproducibility. The accurate quantification of ACT makes the proposed electrode of great interest for the public health.

Fabrication of highly sensitive and selective nanocomposite film based on CuNPs/fullerene-C60/MWCNTs: An electrochemical nanosensor for trace recognition of paracetamol

Designing an electrochemical sensor for versatile clinical applications is a sophisticated task and how dedicatedly functionalized composite materials can perform on this stage is a challenge for today and tomorrow's Nanoscience and Nanotechnology. In the present work, we demonstrate a new strategy for the development of novel electrochemical sensor based on catalytic nanocomposite film. Fullerene-C60 and multi-walled carbon nanotubes (MWCNTs) were dropped on the pre-treated carbon paste electrode (CPE) and copper nanoparticles (CuNPs) electrochemically deposited on the modified CPE to form nanocomposite film of CuNPs/C60/MWCNTs/CPE. In this work, an electrochemical method based on square wave voltammetry (SWV) employing CuNPs/C60/MWCNTs/CPE has been presented for the recognition and determination of paracetamol (PT). Developed electrochemical sensor was characterized using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronocoulometry. The composite film made the fabricated sensor to display high sensitivity and good selectivity for PT detection. The influence of the optimization parameters such as pH, accumulation time, deposition potential, scan rate and effect of loading of composite mixture of C60-MWCNTs and CuNPs on the electrochemical performance of the sensor were evaluated. A linear range from 4.0 × 10(-9) to 4.0 × 10(-7) M for PT detection was obtained with a detection limit of 7.3 × 10(-11) M. The fabricated sensor was successfully applied to the detection of PT in biological samples with good recovery ranging from 99.21 to 103%.

One pot synthesis of CeO2 nanoparticles on a carbon surface for the practical determination of paracetamol content in real samples

Sucrose derived carbon decorated with CeO₂ nanoparticles (CeO₂–C) was prepared using a one pot synthesis and used for the electrochemical sensing of paracetamol.

Fabrication of electrochemical sensor for paracetamol based on multi-walled carbon nanotubes and chitosan-copper complex by self-assembly technique

An electrochemical sensor for paracetamol based on multi-walled carbon nanotubes and chitosan-copper complex (MWCNTs/CTS-Cu) was fabricated by self-assembly technique. The MWCNTs/CTS-Cu modified GCE showed an excellent electrocatalytic activity for the oxidation of paracetamol, and accelerated electron transfer between the electrode and paracetamol. Under optimal experimental conditions, the differential pulse peak current was linear with the concentration of paracetamol in the range of 0.1-200 μmol L(-1) with a detection limit of 0.024 μmol L(-1). The sensitivity was found to be 0.603 A/mol L(-1). The proposed sensor also showed a high selectivity for paracetamol in the presence of ascorbic acid and dopamine. Moreover, the proposed electrode revealed good reproducibility and stability. The proposed method was successfully applied for the determination of paracetamol in tablet and human serum samples.