A novel fatty-acid-based in-tube dispersive liquid–liquid microextraction technique for the rapid determination of nonylphenol and 4-tert-octylphenol in aqueous samples using high-performance liquid chromatography–ultraviolet detection

Portable one-step effervescence tablet-based microextraction combined with smartphone digital image colorimetry: Toward field and rapid detection of trace nickel ion

In this study, the one-step switchable hydrophilic solvent (SHS)-based effervescence tablet microextraction (ETME) was coupled with smartphone digital image colorimetry (SDIC) for the field detection of nickel ion (Ni2+) for the first time. Both extractant and CO2 were generated in situ when the novel SHS-based effervescence tablet was placed in the sample solution. The complexant 1-(2-pyridinylazo)-2-naphthaleno (PAN) dissolved from the effervescence tablet to form a stable complex with Ni2+, and the extractant was uniformly dispersed in the sample solution under the action of CO2 and fully in contact with Ni-PAN, which enabled efficient extraction of Ni2+. The color changes of the extraction phase were captured by smartphone, then a quantitative relationship between the concentrations of Ni2+ and color intensity of images captured using a smartphone was established by customized applet WASDIC, which realized quantitative analysis of Ni2+ in different samples. Under optimal conditions, the enhancement factor (EF) of the proposed method was 65.1, the limit of detection (LOD) and limit of quantification (LOQ) were 1.69 and 5.64 μg L-1, respectively. The developed method was successfully applied to the detection of trace Ni2+ in the environmental samples and natural medicines. And the applicability of the method for use in field analysis was validated.

Acid induced dispersive liquid-liquid microextraction based on in situ formation of hydrophobic deep eutectic solvents for the extraction of bisphenol A and alkylphenols in water and beverage samples

This study describes the development of an acid induced dispersive liquid-liquid microextraction method based on the in situ formation of hydrophobic deep eutectic solvents for the extraction of bisphenol A and alkylphenols from environmental water and beverage samples. Hydrochloric acid altered the hydrophilic-hydrophobic state of fatty acid salts to obtain hydrophobic fatty acids, which formed hydrophobic deep eutectic solvents with analytes in situ to extract the analytes. Under optimized conditions, the limits of detection and limits of quantitation were 0.03-0.1 μg L-1 and 0.12-0.3 μg L-1, the intraday and interday relative standard deviations were less than 3.9 %, and the enrichment factor was 29-32. The recoveries of bisphenol A and alkylphenols were 95.9-104.9 % and 86.9-105.0 %, respectively. The extraction process used only hydrochloric acid and fatty acid salts, and the extraction process required less than 1 min. This method has the advantages of simplicity, speed, low cost and environmental friendliness.

Electrospun of functionalized mesoporous UiO-66 as the selective coating of solid phase microextraction Arrow for the determination of nine alkylphenols

A solid-phase microextraction (SPME) Arrow and high-performance liquid chromatography-UV detector (HPLC-UV, detection at 225 nm) based method was developed for the selective determination of nine alkylphenols (APs) in milk. The functionalized mesoporous UiO-66 (4-meso-UiO-66) was utilized as the new coating material, which was synthesized by post-modification of pore-expanded UiO-66-NH2 by an esterification reaction with 4-pentylbenzoic acid. It was fully characterized by X-ray photoelectron spectroscopy (XPS), fourier transformation infrared spectrometry, nitrogen sorption-desorption test, scanning electron microscopy, transmission electron microscopy, and X-ray diffractometer. The characterization results showed the ester groups and benzene rings were introduced into the 4-meso-UiO-66, and the mesoporous structure was predominant in the 4-meso-UiO-66. The extraction mechanism of 4-meso-UiO-66 to APs is the synergistic effect of Zr-O electrostatic interaction and the size exclusion effect resulting from XPS, selectivity test, and nitrogen sorption-desorption test. The electrospinning technique was utilized to fabricate the 4-meso-UiO-66 coated SPME Arrow and polyacrylonitrile (PAN) was used as the adhesive. The mass rate of 4-meso-UiO-66 to PAN and the electrospinning time were evaluated. The extraction and desorption parameters were also studied. The linear range of this method was 0.2-1000 μg L-1 with a coefficient of determination greater than 0.9989 under the optimal conditions. The detection limits were 0.05-1 μg L-1, the inter-day and intra-day precision (RSD) were 2.8-11.5%, and the recovery was 83.6%-112%. The reusability study showed that the extraction performance of this new SPME Arrow could be maintained after 80 adsorption-desorption cycles. This method showed excellent applicability for the selective determination of APs in milk.

Isomer-specific analysis of nonylphenol and their transformation products in environment: A review

Nonylphenols (NPs) are crucial fine chemicals widely employed in producing industrial and consumer surfactants that ultimately enter the environment through various pathways, leading to environmental pollution. NPs are suspected endocrine-disrupting chemicals that may accumulate in the body over time, resulting in unusual reproductive function. Due to limitations in analytical methods, NPs have typically been quantified as a whole in some studies. However, NPs are a mixture of multibranched structures, and different NP isomers exhibit distinct environmental behaviors and toxic effects. Therefore, it is critical to analyze environmental and human biological samples at the isomer-specific level to elucidate the contamination characteristics, human exposure load, and toxic effects of NPs. Accurately analyzing NP samples with various isomers, metabolites, and transformation products presents a significant challenge. This review summarizes recent advances in analytical research on NPs in technical products, environmental, and human biological samples, particularly emphasizing the synthesis and separation of standards and the transformation of NP homolog isomers in samples. Finally, the review highlights the research gaps and future research directions in this domain.

Deep eutectic solvent-based dispersive liquid-liquid microextraction followed by smartphone digital image colorimetry for the determination of carbofuran in water samples

A detection method of carbofuran (CBF) in water samples was reported using deep eutectic solvent (DES)-based dispersive liquid-liquid microextraction (DLLME) combined with digital image colorimetry (DIC), which was environmentally friendly, solvent-saving, rapid, and convenient. Under alkaline conditions, the green and multifunctional extractant DESs dissociated into linalool and heptanoic acid, and CBF was hydrolyzed to 2,3-dihydro-2,2-dimethyl-7-benzofuranol and further coupled with fast blue BB salt to form an azo derivative. Heptanoic acid led to the dispersion of linalool to extract the orange-red azo derivative; DIC was used for quantitative analysis using a smartphone with its associated ease of data-acquisition. This experiment optimized the types, molar ratios, and volumes of DESs and the amounts of sodium carbonate and sodium chloride. Under optimal conditions, the limits of detection (LOD) and quantitation (LOQ) were 0.024-0.032 mg L^-1 and 0.081-0.108 mg L^-1, respectively. The extraction recoveries in real samples (tap, pond, and river water) were 92.4-101.0% with a relative standard deviation below 4.6%. This method has successfully analyzed CBF in different water samples and shows prospects for the monitoring and control of CBF residues in other environmental samples.

Extraction of Emerging Contaminants from Environmental Waters and Urine by Dispersive Liquid-Liquid Microextraction with Solidification of the Floating Organic Droplet Using Fenchol:Acetic Acid Deep Eutectic Mixtures

In this work, several eutectic mixtures formed by fenchol and acetic acid at seven molar ratios (between 4:1 and 1:4) were characterized and studied for the first time for their possible application as extraction solvents in dispersive liquid-liquid microextraction based on the solidification of the floating organic droplet (DLLME-SFO). A group of 13 emerging contaminants (gemfibrozil, bisphenol F, bisphenol A, 17β-estradiol, testosterone, estrone, levonorgestrel, 4-tert-octylphenol, butyl benzyl phthalate, dibutyl phthalate, 4-octylphenol, 4-nonylphenol, and dihexyl phthalate) was selected and determined by liquid chromatography with ultraviolet and tandem mass spectrometry detection. Among the studied mixtures, only those of 2:1 and 1:1 provided the suitable features from an operational and repeatability point of view, suggesting that several eutectic mixtures of the same components may also provide similar results. Once the extraction conditions of both mixtures were optimized, the method was applied to the extraction of sea water, urine, and wastewater at different concentration levels, allowing the achievement of absolute recovery values between 49 and 100% for most analytes with relative standard deviation values below 19%. In addition, several samples of each type were analyzed, finding bisphenol A and gemfibrozil in some of them. The greenness of the method was also evaluated using the AGREEprep metric. The DLLME-SFO procedure was found to be very simple, quick, and effective and with a good sample throughput.

Switchable-hydrophilicity solvent-based liquid-phase microextraction in an on-line system: Cobalt determination in food and water samples

An on-line system employing switchable-hydrophilicity solvent-based liquid-phase microextraction (SHS-LPME) is described in this work. The method is based on the preconcentration of the species formed between cobalt and the reagent 1-nitroso-2-naphthol (NN), with subsequent detection by digital image colorimetry. The system's operation begins with the on-line mixture of sample, switchable solvent, and an alkaline agent in a reaction coil. Then the mixture is transported to an extraction chamber. The introduction of a proton donor leads to the passage of the solvent to its hydrophobic form, which allows phase separation. The rich phase is then directed to a glass tube, where detection is performed. Octanoic acid, sodium carbonate, and sulfuric acid were used as the extraction solvent, the alkaline agent, and the proton donor, respectively. Under optimized conditions, the method presented a detection limit of 0.8 μg L^-1 and an enrichment factor of 41. The precision obtained was 4.8% (20 μg L^-1). The accuracy of the method was tested by the analysis of Tomato Leaves certified reference material (NIST 1573a). The method was applied to the determination of cobalt in food, dietary supplements, and water samples. The method is presented as a green alternative and very accessible to the determination of cobalt in the analyzed samples.

A Simple Microextraction Method for Toxic Industrial Dyes Using a Fatty-Acid Solvent Mixture

A mixture of dodecanoic and hexanoic fatty acids was used to perform a simple and efficient microextraction method for industrial dyes such as methylene blue (MB), methyl violet (MV), and malachite green (MG) in aqueous solution. The fatty-acid microextractants were simply mixed and heated until the mixture became homogeneous before adding it to the dye solutions. The fatty-acid solvent and its components were characterized with Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (1H NMR) measurements, while the dye concentrations were measured using UV-Vis spectroscopy. The performance of the extracting mixture was observed to vary across different dye contaminants, dosages of the extractant, concentrations of the dyes, and contact times. High extraction efficiencies of up to ~99% were obtained for MG as well as MV, and ~73% efficiency was achieved for MB. The study shows how a mixture of fatty acids can be used as a simple, efficient, green, and sustainable low-volume method for the removal of toxic industrial dyes in aqueous solutions.

Sustainable green solvents for microextraction techniques: Recent developments and applications

The development and application of alternative green solvents in analytical techniques consist of trends in sample preparation, since this subject represents an important step toward sustainability in experimental procedures. This review is focused on the main theoretical aspects related to deep eutectic solvents (DES), switchable hydrophilicity solvents (SHS) and supramolecular solvents (SUPRAS). Recent applications are highlighted, particularly for the extraction of different analytes from environmental, biological and food matrices. Moreover, novel configurations are emphasized, aiming for efficient, automated and high-throughput procedures. This review also provides some critical points regarding the use of these solvents and their green aspects.

Effervescence-assisted dual microextraction of PAHs in edible oils using lighter-than-water phosphonium-based ionic liquids and switchable hydrophilic/hydrophobic fatty acids

Herein, we developed a novel effervescence-assisted dual microextraction method, abbreviated as EM-LPSH, using lighter-than-water phosphonium-based ionic liquids (LPILs) and switchable hydrophilic/hydrophobic fatty acids (SHFAs). The EM-LPSH method was utilized for quick enrichment/extraction of polycyclic aromatic hydrocarbons (PAHs) in edible oils. Owing to lower density than water, LPILs used as the first extractant were floated on the upper layer of the aqueous phase, leading to a convenient separation/collection compared with traditional heavier-than-water imidazolium-based ionic liquids. Interestingly, SHFAs play triple functions: a dispersive solvent in the microextraction process, an acidic source in effervescent reaction, and the second extractant in dual microextraction, due to switchability from hydrophilicity to hydrophobicity. Consequently, the integration of LPILs with SHFAs greatly enhanced the extraction efficiency for PAHs owing to the quick dual microextraction process. Some important variables were rigorously optimized using a one-factor-at-a-time approach. Under optimized conditions, the EM-LPSH/HPLC-FLD method provided a wide linear range (0.07~0.63-200 μg kg^-1), satisfactory recovery (80.12-103.27%), and low limit of detection (0.02-0.19 μg kg^-1), as well as high intra-day and inter-day precision (0.03-6.55) for six PAHs in edible oils. By using certified reference material in olive oil samples (GBW10162), the recoveries ranged from 97.40 to 98.39%, demonstrating high accuracy and precision. According to the detected levels of PAHs in six unheated and heated oils, their edible safety was evaluated in detail. In short, the newly developed method is simple, convenient, and highly efficient, thereby showing great prospects for application in conventional monitoring of trace-level PAHs in edible oils.

Popping candy-assisted dispersive liquid-liquid microextraction for enantioselective determination of prothioconazole and its chiral metabolite in water, beer, Baijiu, and vinegar samples by HPLC

To simultaneously determine the enantiomers of prothioconazole and its chiral metabolite prothioconazole-desthio in water, beer, Baijiu, and vinegar samples by HPLC, a simple, fast, environmentally-friendly popping candy-assisted dispersive liquid-liquid microextraction technique was developed. A green medium-chain fatty acid (decanoic acid) and popping candy could be used as the extractant and solid dispersant respectively to avoid the use of toxic organic solvents. Decanoic acid was collected after extraction by solidification at room temperature. The linear range of this technique was from 27.1 to 1000 µg L^-1. The limits of detection and quantification were within the ranges of 8.1-11.2 μg L^-1 and 27.1-37.3 μg L^-1, respectively. The extraction recovery was 80.8% to 102.5% with the relative standard deviation ranged from 1.1 to 7.1%. This technique has been successfully applied to enantioselectively determine the residues of prothioconazole and prothioconazole-desthio in water, beer, Baijiu, and vinegar samples.

Digital image colorimetry detection of carbaryl in food samples based on liquid phase microextraction coupled with a microfluidic thread-based analytical device

This research used a digital image colorimetry (DIC) method to detect carbaryl in food samples using effervescence-assisted liquid phase microextraction based on solidification of switchable hydrophilicity solvent combined with a microfluidic thread-based analytical device (EA-LPME-SSHS-μTAD). 1-naphthol, the hydrolysate of carbaryl, was extracted into octanoic acid by the adjustment of pH values of the sample solution and separated through solidification in an ice bath. Then 1-naphthol contained in the extracted solution was coupled with 4-methoxybenzenediazonlum tetrafluoroborate (MBDF) fixed on the μTAD to produce tangerine compounds. The inherent colour variation was captured by a smartphone and processed to calculate the intensity (I). Under the optimal conditions, the limit of quantification was within 0.020-0.027 mg kg^-1. The recovery was varied in the range from 92.3% to 105.9% with a relative standard deviation (RSD) below 5%. The developed method provides an alternative strategy to extract and detect pesticides for food samples.

A green and low-cost method employing switchable hydrophilicity solvent for the simultaneous determination of antidepressants in human urine by gas chromatography - mass spectrometry detection

In this study, the use of switchable hydrophilicity solvent with a simple and low-cost lab-made device for the extraction procedure in homogeneous liquid-liquid microextraction is proposed for the first time in the determination of antidepressants in human urine. The antidepressants studied consisted of fluoxetine, amitriptyline, nortriptyline, imipramine, desipramine and sertraline. The optimization of the main parameters that can influence on the extraction efficiency was performed through multivariate approaches. The analytes were separated and identified by gas chromatography coupled to mass spectrometry (GC-MS). The optimal extraction conditions consisted of using N,N-dimethylcyclohexylamine (DMCHA) as the switchable hydrophilicity solvent (SHS), 500 µL of urine sample previously diluted with ultrapure water at 1:1 ratio (v/v), 200 μL of a mixture of SHS:HCl 6 mol L^-1 (1:1 v/v), 600 μL of NaOH 10 mol L^-1 and 3 min of extraction time. A volume of 40 µL of diphenylamine at concentration of 500 µg L^-1 (20 ng) was used as internal standard. The method developed was in-house validated, providing coefficients of determination higher than 0.995 for all analytes, limits of detection (LOD) from 0.02 to 0.88 µg L^-1, limits of quantification (LOQ) from 0.05 to 2.92 µg L^-1, relative recoveries of 68 to 102%, intra-day precision from 0.5 to 15.9%, inter-day precision from 4.2 to 19.3%, selectivity and robustness. The method proposed was successfully applied in five human urine samples from a Toxicological Information Center located in Porto Alegre (Brazil). The results demonstrated that the µP-SHS-HLLME approach is highly cost-effective, rapid, simple and environmentally-friendly with satisfactory analytical performance.

Combination of Counter Current Salting-Out Homogenous Liquid-Liquid Extraction with Dispersive Liquid-Liquid Microextraction for the High-Performance Liquid Chromatographic Determination of Environmental Estrogens in Water Samples

In this paper, counter current salting-out homogenous liquid-liquid extraction was combined with dispersive liquid-liquid microextraction for the determination of environmental estrogens in water samples by high-performance liquid chromatography. In this method, initially, sodium chloride was filled into a syringe and a mixture of water sample and acetonitrile was driven to pass through the syringe. Due to salting-out effect, fine droplets of acetonitrile went up through the remaining mixture and aggregated as a separated layer on the top. Then, the collected organic phase (acetonitrile) was removed with a syringe and mixed with carbon tetrachloride (extraction solvent). In the second step, the mixed organic phase was rapidly injected into 5 mL of distilled water to further enrich the analytes. Good linearity was obtained in the concentration range of 2.0~200 ng/mL for diethylstilbestrol (DES) and 8.0~200 ng/mL for octylphenol (OP), respectively. Limits of detection were 0.09 ng/mL for DES and 0.20 ng/mL for OP, respectively. Relative standard deviations for intra- and inter-day precisions were less than 2.1 and 3.1%, respectively. Finally, the established method was successfully applied to determine DES and OP in river water, well water, bottled water and campus drinking water samples with recoveries in the range from 81.0 to 105.9%.

A novel switchable solvent liquid-phase microextraction technique based on the solidification of floating organic droplets: HPLC-FLD analysis of polycyclic aromatic hydrocarbon monohydroxy metabolites in urine samples

A novel switchable solvent liquid-phase microextraction technique, based on the solidification of floating organic droplets (SS-LPME-SFO), was developed for the pretreatment of aqueous samples.

An amino-functionalized ordered mesoporous polymer as a fiber coating for solid phase microextraction of phenols prior to GC-MS analysis

An amino-functionalized ordered mesoporous polymer (OMP-NH₂) was synthesized and applied as a fiber coating for solid phase microextraction of polar phenols from environmental samples. The fiber coating was prepared by loading the OMP-NH₂ powder onto a stainless steel wire through silicone gel. Combined with GC-MS, the fibers were employed to quantify trace of phenols in water through headspace-SPME. The characterization showed the OMP-NH₂ to have a large specific surface area (420 m² g^-1) and good thermal stability (>400 °C). Due to its mesoporous structure and favorable interactions via hydrogen bonding and π stacking interactions with phenols, the sorbent represents a promising candidate for the separation and enrichment of polar phenols. Extraction conditions, such as temperature, extraction time, salt concentration, pH value and desorption time, were fully optimized. Under the optimized conditions, the coating exhibits an enrichment effect that is ~2-10 times better than that of a commercial polyacrylate coating. Figures of merit include (a) low limits of detection (0.05-0.16 ng L^-1), (b) wide linear ranges (0.2-10,000 ng L^-1), and (c) high enrichment factors (510-2272). The relative standard deviations for one fiber and fiber-to-fiber were in the range of 4.0-6.1% and 4.6-7.4%, respectively. The method was applied to the determination of phenols in water samples and gave satisfactory recoveries between 85.4 and 112.2%. Graphical abstract An amino-functionalized ordered mesoporous polymer (OMP-NH₂) was synthesized by a solventless method and applied as headspace solid phase microextraction (HS-SPME) fiber coating for the extraction of polar phenols from the environmental samples.

Integrated disperser freezing purification with extraction using fatty acid-based solidification of floating organic-droplet (IDFP-EFA-SFO) for triclosan and methyltriclosan determination in seawater, sediment and seafood

A microextraction method for the determination of triclosan and methyltriclosan in marine environmental samples was developed. The disperser was first serves as a preliminary extractant for analytes, then as a frozen solvent to remove impurities at -20 °C, and finally as a disperser agent in the microextraction procedure. With the extractants solidified and float on the surface of the aqueous phase at low temperature, a separation was achieved to avoided use of specialized laboratory instruments. The method was optimized using Plackett-Burman design and central composite design as follows: 146 μL octanoic acid as extractant, 793 μL acetoneas disperser, 3.0 min centrifugation and 1.1 min vortex time. The limits of detection were 0.022-0.060 μg L^-1 or μg kg^-1 and recoveries were 83.3-103.5% for TCS and MTCS in seawater, sediments and seafood. The method has excellent prospects for sample pre-treatment and trace-level analysis of triclosan and methyltriclosan in marine environmental samples.

Extraction of triclosan and methyltriclosan in human fluids by in situ ionic liquid morphologic transformation

Herein, we established an ionic liquid (IL)-based liquid-solid transformation microextraction (IL-LTME) combined with HPLC-UV detection for the simultaneous determination of triclosan (TCS) and its methylated product, methyltriclosan (MTCS), in human fluids. The IL-LTME method was based on an in situ metathesis between hydrophilic IL and ion-exchange salt to form a solid hydrophobic IL. According to the above principle, a hydrophilic IL, [C₁₂MIM]Br, was selected as the extractant, and NH₄PF₆ as ion-exchange salt. The prominent advantages of the newly developed method are: (1) the in-situ reaction between the extractant [C₁₂MIM]Br and ion-exchange salt NH₄PF₆ changed the IL from hydrophilic to hydrophobic that avoiding the stick of ionic liquid on the tube wall; (2) bubbling with NH₃ greatly increased the contact area between IL-extractant and analytes resulting in improved extraction recovery; and (3) solidification of the [C₁₂MIM] PF₆ provided a good separation and avoided the use of specialized equipment. A series of main parameters were optimized by single-factor screening and central composite design as follows: 0.9 mL of NaOH, 2.0 min of second ultrasonically time, 10 min of centrifugation time, 21 mg of extractant [C₁₂MIM]PF₆, 2.4 min of ultrasonic time, 65 mg of NH₄PF₆ and 13.8 min of cooling time. Under the optimized conditions, the limits of detection for TCS and MTCS were 0.126-0.161 μg L^-1 in plasma samples, and 0.211-0.254 μg L^-1 in urine samples, respectively. The extraction recoveries for TCS and MTCS were in the range of 94.1-103.8%. The intra-day and inter-day precisions were 1.00-4.74% and 1.02-5.21%, respectively. In general, the IL-LTME method is environment-friendly, time-saving, economical, high efficient and robust with low detection limits and high recoveries. Thus, the newly developed method has excellent prospects for sample pretreatment and analysis of trace TCS and MTCS in blood and urine samples.