Magnetic N-doped carbon nanotubes: A versatile and efficient material for the determination of polycyclic aromatic hydrocarbons in environmental water samples

Development of new PDMS in tube extraction microdevice for enhanced monitoring of polycyclic aromatic hydrocarbons and their derivatives in water

Contamination by polycyclic aromatic hydrocarbons (PAHs) is an urgent environmental concern, given its atmospheric dispersion and deposition in water bodies and soils. These compounds and their nitrated and oxygenated derivatives, which can exhibit high toxicities, are prioritized in environmental analysis contexts. Amid the demand for precise analytical techniques, comprehensive two-dimensional chromatography coupled with mass spectrometry (GCxGC/Q-TOFMS) has emerged as a promising tool, especially in the face of challenges like co-elution. This study introduces an innovation in the pre-concentration and detection of PAHs using an extraction fiber based on polydimethylsiloxane (PDMS), offering greater robustness and versatility. The proposed technique, termed in-tube extraction, was developed and optimized to effectively retain PAHs and their derivatives in aqueous media, followed by GCxGC/Q-TOFMS determination. Fiber characterization, using techniques such as TG, DTG, FTIR, and SEM, confirmed the hydrophobic compounds retention properties of the PDMS. The determination method was validated, pointing to a significant advancement in the detection and analysis of PAHs in the environment, and proved effective even for traces of these compounds. The results showed that the detection limits (LOD) and quantification limits (LOQ) ranged from 0.07 ng L-1 to 1.50 ng L-1 and 0.33 ng L-1 to 6.65 ng L-1, respectively; recovery ranged between 72 % and 117 %; and the precision intraday and interday ranged from 1 % to 20 %. The fibers were calibrated in the laboratory, with exposure times for analysis in the equilibrium region ranging from 3 to 10 days. The partition coefficients between PDMS and water were also evaluated, showing logarithm values ranging from 2.78 to 5.98. The fibers were applied to the analysis of real water samples, demonstrating high capacity. Additionally, given the growing demand for sustainable methods, the approach presented here incorporates green chemistry principles, providing an efficient and eco-friendly solution to the current chemical analysis scenario.

Urinary polycyclic aromatic hydrocarbon metabolites, plasma p-tau231 and mild cognitive impairment in coke oven workers

BACKGROUND

As a group of environmental pollutants, polycyclic aromatic hydrocarbons (PAHs) may be neurotoxic，especially in high-exposure occupational populations. However, the effect of PAHs on mild cognitive impairment (MCI) is still unclear.

OBJECTIVE

We aimed to investigate the relationship between PAH metabolites and MCI and to explore whether plasma p-tau231 can be used as a potential biomarker to reflect MCI in coke oven workers.

METHOD

A total of 330 workers were recruited from a coke oven plant as the exposure group, and 234 workers were recruited from a water treatment plant as the control group. The concentrations of eleven PAH metabolites and plasma p-tau231 were determined by high-performance liquid chromatography-mass spectrometry (HPLC-MS/MS) and ELISA. Cognitive function was measured by the Montreal Cognitive Assessment (MoCA) questionnaire. A multivariate logistic regression model and multiple linear regression model were used to analyze the associations of urinary PAH metabolites with the detection rate of MCI, MoCA scores and plasma p-tau231. The dose-response relationships were evaluated using restricted cubic spline models.

RESULTS

We found 146 MCI-positive workers in coke oven plant (44.24%), and 69 MCI-positive workers in water treatment plant (29.49%). In addition, the urinary sum of PAH metabolites (Ʃ-OH PAHs) was significantly associated with MCI (OR, 1.371; 95% CI:1.102-1.705). Each one-unit increase in ln-transformed Ʃ-OH PAHs was associated with a 0.429 decrease in the sum of MoCA, a 0.281 reduction in the visuospatial/executive function and a 9.416 increase in the level of plasma P-Tau231. We found a negative association between plasma P-Tau231 and visuospatial/executive function (β = -0.007, 95% CI: -0.011, -0.003).

CONCLUSION

Our data indicated that urinary Ʃ-OH PAHs levels of workers were positively associated with MCI and the level of plasma P-Tau231.

Synthesis and Characterization of MWCNT-COOH/Fe3O4 and CNT-COOH/Fe3O4/NiO Nanocomposites: Assessment of Adsorption and Photocatalytic Performance

In this study the adsorption and photodegradation capabilities of modified multi-walled carbon nanotubes (MWCNTs), using tartrazine as a model pollutant, is demonstrated. MWCNT-COOH/Fe₃O₄ and MWCNT-COOH/Fe₃O₄/NiO nanocomposites were prepared by precipitation of metal oxides in the presence of MWCNTs. Their properties were examined by X-ray diffraction in powder (XRD), Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Raman spectroscopy, synchrotron-based Scanning PhotoElectron Microscopy (SPEM), and Brunauer-Emmett-Teller (BET) analysis. It was found that the optimal adsorption conditions were pH 4 for MWCNT-COOH/Fe₃O₄ and pH 3 for MWCNT-COOH/Fe₃O₄/NiO, temperature 25 °C, adsorbent dose 1 g L^-1, initial concentration of tartrazine 5 mg L^-1 for MWCNT-COOH/Fe₃O₄ and 10 mg L^-1 for MWCNT-COOH/Fe₃O₄/NiO and contact time 5 min for MWCNT-COOH/Fe₃O₄/NiO and 15 min for MWCNT-COOH/Fe₃O₄. Moreover, the predominant degradation process was elucidated simultaneously, with and without simulated sunlight irradiation, using thermal lens spectrometry (TLS) and UV-Vis absorption spectrophotometry. The results indicated the prevalence of the photodegradation mechanism over adsorption from the beginning of the degradation process.

Simultaneous remediation of polycyclic aromatic hydrocarbon and heavy metals in wastewater with zerovalent iron-titanium oxide nanoparticles (ZVI-TiO2)

The presence of polycyclic aromatic hydrocarbons (PAHs) and heavy metals (HM) in wastewater is a major challenge to the environment as various approaches have been used to remediate these contaminants from the environment. Zerovalent iron-titanium oxide nanoparticle (ZVI-TiO2 NPs) was synthesized by wet reflux in an inert environment using nitrogen gas and sodium borohydride as reducing agents. Characterization was carried out using a scanning electron microscope (SEM) coupled with electron diffraction X-ray (EDX) and Fourier transform infrared spectrophotometer (FTIR). Assessments of the wastewater were carried out with atomic absorption spectrophotometer (AAS) for HM and a gas chromatography-mass spectrophotometer (GCMS) for PAHs to determine the initial concentration (C i) compared with permissible limits of surface water and adsorption capacity with ZVI-TiO2 NPs (C f), respectively. The results obtained indicate a percentage yield of 65.51 ± 0.01 of ZVI-TiO2 NPs, with a particle size of 100 nm, weight composition of iron, titanium, and oxygen at 49.69, 5.24, and 35.41 g, respectively. FTIR shows a vibrational change of 3465, 2929, and 1641 cm−1 of OH, CH, and CO group needed for metal binding and adsorption. Remediation of HM after acid digestion gave effective removal of zinc, copper, cadmium, cobalt, and lead at an adsorption capacity of 64.29, 54.83, 53.13, 48.39, and 42.66% respectively. The adsorptions of benzo[a]pyrene, fluoranthene, pyrene, benzo[b]fluoranthene, and perylene were 77.87, 67.85, 52.17, 29.50, and 25.45%, respectively. These results indicate that metal/metal oxide (ZVI-TiO2) nanoparticles have a high potential in the remediation of heavy metals and PAHs from the water ecosystem.

Synthesis of low-density polyethylene derived carbon nanotubes for activation of persulfate and degradation of water organic micropollutants in continuous mode

Plastic derived carbon nanotubes (CNTs) were tested as catalysts in persulfate activation for the first time. Four catalysts were prepared by wetness impregnation and co-precipitation (using Al₂O₃, Ni, Fe and/or Al) and implemented to grow CNTs by chemical vapour deposition (CVD) using low-density polyethylene (LDPE) as carbon feedstock. A catalyst screening was performed in batch mode and the best performing CNTs (CNT@Ni+Fe/Al₂O₃-cp) led to a high venlafaxine mass removal rate (3.17 mg g^-1 h^-1) in ultrapure water after 90 min (even with a mixture of micropollutants). Its degradation increased when the matrix was replaced by drinking water and negligibly affected in surface water. A composite polymeric membrane was then fabricated with CNT@Ni+Fe/Al₂O₃-cp and polyvinylidene fluoride (PVDF), a high venlafaxine mass removal rate in surface water being also observed in 24 h of continuous operation. Therefore, the results herein reported open a window of opportunity for the valorisation of plastic wastes in this catalytic application performed in continuous mode.

Recent advances in magnetic carbon nanotubes: synthesis, challenges and highlighted applications

Magnetic carbon nanotubes (MCNTs), consisting of carbon nanotubes (CNTs) and magnetic nanoparticles (MNPs), have enormous exploration and application potentials due to their superior physical and chemical properties, such as unique magnetism and high enrichment performance. This review concentrates on the rapid advances in the synthesis and application of magnetic carbon nanotubes. Great progress has been made in the preparation of MCNTs by developing methods including chemical vapor deposition, pyrolysis procedure, sol-gel process, template-based synthesis, filling process and hydrothermal/solvothermal method. Various applications of MCNTs as a mediator of the adsorbent in magnetic solid-phase extraction, sensors, antibacterial agents, and imaging system contrast agents, and in drug delivery and catalysis are discussed. In order to overcome the drawbacks of MCNTs, such as sidewall damage, lack of convincing quantitative characterization methods, toxicity and environmental impact, and deficiency of extraction performance, researchers proposed some solutions in recent years. We systematically review the latest advances in MCNTs and discuss the direction of future development.

Determination of trace bisphenols in functional beverages through the magnetic solid-phase extraction with MOF-COF composite

In this study, a novel porous composite (Fe₃O₄@TAPB-COF@ZIF-8) consisting of metal-organic and covalent organic frameworks was developed and applied to the magnetic solid-phase extraction (MSPE) of bisphenols. The extraction parameters such as the extraction time, solution pH, amounts of adsorbent, and ionic strength were investigated to obtain the best extraction conditions. By optimizing the MSPE, a convenient and sensitive analytical method was established in combination with high-performance liquid chromatography. The method achieved low detection limits (0.04-0.05 ng mL^-1), wide linear range (0.25-1000 ng mL^-1), good repeatability (1.20-4.30%), good reproducibility (1.34-4.03%), and satisfactory recoveries of four functional beverages (66.2-116.6%).

Urinary polycyclic aromatic hydrocarbon metabolites, peripheral blood mitochondrial DNA copy number, and neurobehavioral function in coke oven workers

BACKGROUND

Polycyclic aromatic hydrocarbons (PAHs) are the risk factors for workers' neurological performance, which were widely exist in the occupational environment.

OBJECTIVE

We aimed to investigate the dose-response relationship between various PAH metabolites and workers' neurobehavioral changes and to explore whether mitochondrial DNA copy number (mtDNAcn) can be used as a potential biomarker to reflect changes in neurobehavioral behavior.

METHOD

A total of 697 workers were recruited from a coke oven plant. The concentrations of eleven PAHs metabolites were determined by HPLC-MS/MS. Peripheral blood mtDNAcn was measured using QPCR. Neurobehavioral function was measured by NCTB questionnaire. The dose-response relationships were evaluated using restricted cubic spline models. Mediation analysis was also carried out.

RESULTS

We found dose-response relationships between urinary 2-hydroxynaphthalene (2-OH Nap), sum of PAH metabolites (Ʃ -OH PAHs) and total digit span (DSP), backward digit span (DSPB), forward digit span (DSPF) and mtDNAcn. Each one-unit increase in ln-transformed of 2-OH Nap or Ʃ -OH PAHs was associated with a 2.64 or 3.22 decrease in DSP, a 1.20 or 1.58 decrease in DSPF, a 1.44 or 1.62 decrease in DSPB and a 0.13 or 0.12 decrease in mtDNAcn. However, we did not find a significant mediation effect of mtDNAcn between PAHs metabolites and DSP, DSPF, or DSPB.

CONCLUSION

Our data indicated that workers urinary 2-hydroxynaphthalene and sum of PAH metabolites levels were inversely associated with mtDNAcn and neurobehavior, especially their auditory memory. However, there was no significant mediation effect of mtDNAcn between urinary PAHs metabolites and neurobehavior.

Helical multi-walled carbon nanotube-coated fibers for solid-phase microextraction determination of polycyclic aromatic hydrocarbons at ultra-trace levels in ice and snow samples

Polycyclic Aromatic Hydrocarbons (PAHs) detected in polar environment are recognized tracers of anthropogenic pollution. High sensitivity and selectivity are required for their analysis in ice and snow samples due to the presence at ultra-trace levels. In this study a solid-phase microextraction (SPME) gas chromatography-mass spectrometry (GC-MS) method for simultaneous determination of the 16 US-EPA priority pollutant PAHs in polar snow and ice samples was developed and validated. Helical multiwalled carbon nanotubes (HMWCNTs) were proposed for the first time as novel SPME coating. For optimization purposes a Central Composite Design and the multicriteria method of the desirability functions were applied to investigate the influence of extraction parameters, i.e. time and temperature as main factors. The optimal values were 68 °C for the extraction temperature and 60 min for the extraction time. The developed SPME-GC-MS method exhibited detection limits of 16 PAHs in the 0.1-1.2 ng/L range, a repeatability and an intermediate precision within 15% and 22% relative standard deviation, respectively, and good recovery rates in the 93.7 (± 0.1)-119.7 (± 0.2)% range for real spiked water sample, showing better analytical performance compared to commercial PDMS fibers. Enrichment factors in the 2670 (± 290)-142120 (± 580) range were calculated and a long fiber shelf-life with the possibility to reuse the fiber more than 200 times was achieved. Finally, the proposed method was successfully applied to the determination of PAHs in surface snow samples collected in April 2019 at Ny-Ålesund, Svalbard. Its application to the detection of PAHs in samples collected during monitoring campaigns in the polar regions is expected in the near future.

Effective enrichment and detection of trace polybrominated diphenyl ethers in water samples based on magnetic covalent organic framework nanospheres coupled with chromatography-mass spectrometry

Novel core shell structured magnetic covalent organic frameworks were synthesized at room temperature and first applied in water samples for the enrichment of trace polybrominated diphenyl ethers (PBDEs) through magnetic solid-phase extraction. The prepared materials were characterized through transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, vibrating sample magnetometer and X-ray photoelectron spectroscopy. During adsorption, the parameters affecting extraction and desorption efficiency were further optimized. Combined gas chromatography and mass spectrometry (GC/MS) revealed that high enrichment factors (275-292), low limits of detection (0.12-0.38 ng·L-1), wide linear ranges (0.5-1000 ng·L-1), and good reproducibility (intra-day 1.40%-4.31% and inter-day 5.14%-9.12%) were obtained under optimal conditions. The method successfully detected PBDEs in different water samples.

Nanoparticles Used for Extraction of Polycyclic Aromatic Hydrocarbons

This article offers a review on the application of nanoparticles (NPs) that have been used as sorbents in the analysis of polycyclic aromatic hydrocarbons (PAHs). The novel advances in the application of carbon NPs, mesoporous silica NPs, metal, metal oxides, and magnetic and magnetised NPs in the extraction of PAHs from matrix solutions were discussed. The extraction techniques used to isolate PAHs have been highlighted including their advantages and limitations. Methods for preparing NPs and optimized conditions of NPs extraction efficiency have been overviewed since proper extraction procedures were necessary to achieve optimum analytical results. The aim was to provide an overview of current knowledge and information in order to assess the need for further exploration that can lead to an efficient and optimum analysis of PAHs.

Fabric-phase sorptive extraction coupled with ion mobility spectrometry for on-site rapid detection of PAHs in aquatic environment

The contamination of water is a high risk to human health, so there is an urgent need to rapidly detect water pollution in the field. Ion mobility spectrometry (IMS) is suitable for on-site analysis with the merit of rapid analysis and compact size. In this study, we developed a new method which coupled fabric phase sorptive extraction (FPSE) with IMS for rapid detection of polycyclic aromatic hydrocarbons (PAHs) in water present in the field. Polydimethylsiloxane (PDMS) was coated on the glass fiber cloth through a sol-gel reaction. After extracting the PAHs in water, the fabric coated PDMS could be directly put into the inlet of IMS instrument for thermal desorption. The PAHs were analyzed by the IMS instrument operated in the positive ion mode with a corona discharge (CD) ionization source. The primary parameters affecting extraction efficiency such as extraction time, extraction temperature, and ionic strength were investigated and optimized by using phenanthrene (Phe), benzo[a]anthracene (BaA) and benzo[a]pyrene (BaP) as model compounds. Under the optimal conditions, the FPSE-IMS detection limits were 5 ng ml^-1,8 ng ml^-1 and 10 ng ml^-1 respectively. Satisfactory recoveries were obtained in the range from 80.5% to 100.5% by testing the spiked real water samples and validated by the standard method（HJ487-2009）. Based on the results, the method of FPSE-IMS could be feasibly applied for monitoring the water quality on-site and providing early warning in the field.

Human exposure to polycyclic aromatic hydrocarbons: Metabolomics perspective

Polycyclic aromatic hydrocarbons (PAHs) are organic contaminants exhibiting carcinogenic toxicity. They are widespread in the environment, especially in urban areas. Humans are exposed to PAHs via inhalation, ingestion and dermal contact. Though much research has investigated their toxicity, little is known regarding the metabolic responses in humans after exposing to PAHs. However, those studies are important since PAHs become carcinogenic after metabolic activation by humans as indirect-acting carcinogens. As such, it is important to study their metabolism in humans based on metabolomics analysis. The goal of metabolomics study is to obtain a comprehensive view of metabolic reactions in humans after exposing to PAHs to better control the underlying metabolisms and reduce their genotoxicity. This article reviewed the biomarkers, analytical techniques including nuclear magnetic resonance and mass spectrometry, big data multivariate statistical analysis, and animal models that have been utilized to better understand the biological effects of PAHs, PAH-derivatives, and their metabolites and biotransformation products on humans.

Helical Multi-walled Carbon Nanotubes as an Efficient Material for the Dispersive Solid-Phase Extraction of Low and High Molecular Weight Polycyclic Aromatic Hydrocarbons from Water Samples: Theoretical Study

The differences in effectiveness of multi-walled carbon nanotubes (MWCNTs) as the dispersive solid-phase extraction (dSPE) sorbent for the selective extraction of polycyclic aromatic hydrocarbons (PAHs) were explained on the basis of theoretical study. It was observed that for low molecular weight PAHs, the recoveries using non-helical and helical MWCNTs were similar. In contrary, for PAHs containing five or more aromatic rings, the extraction efficiency was higher using HMWCNTs than for non-helical ones. Principle component analysis (PCA) as well as providing structural parameters and interaction energies for adsorption processes (PAH + CNT → PAH-CNT) have been used for this purpose. All the PAH + CNT → PAH-CNT adsorption processes considered were found to be thermodynamically favorable. However, the adsorption energies (E_ads) for PAHs and the helical carbon nanotube surface estimated for the B(a)P-HCNT and I(1,2,3-cd)P-HCNT are substantially less negative than those observed for PAH molecules interacting with the non-helical CNT. Namely, the E_ads calculated in simulated aqueous environment for the B(a)P-MWCNT(6,2) and I(1,2,3-cd)P-MWCNT(6,2) were respectively - 43.32 and - 59.98 kcal/mol, while values of only - 7.75 kcal/mol (B(a)P-HCNT) and - 9.13 kcal/mol (I(1,2,3-cd)P-HCNT) were found for the corresponding PAH-HCNT systems. Therefore, we conclude that the replacement of MWCNTs with HCNTs leads to PAH-HCNT systems in which the interaction energies are much smaller than those estimated for the corresponding PAH-MWCNT systems. HMWCNTs are therefore recommended as the dSPE sorbent phase for the extraction of both low and high molecular weight PAHs from water samples.

Efficient extraction method using magnetic carbon nanotubes to analyze cocaine and benzoylecgonine in breast milk by GC/MS

Aim: The increasing use of cocaine (COC) during breastfeeding has led to growing concern about exposure of infants. Therefore, to study this exposure, a new method to analyze COC and benzoylecgonine in breast milk was developed. Methodology: A new extraction method was used for the first time to analyze COC and its major metabolite, benzoylecgonine, in breast milk using magnetic carbon nanotubes partially doped with nitrogen. Results: The calibration curves were linear in the range 5.0–180.0 ng ml-1. The limit of quantification was 5.0 ng ml-1. Coefficients of variation were between 3.2 and 13.9%. Recovery was between 89.6 and 99.2%. Conclusion: The proposed method is simple, efficient and suitable to determine analytes in breast milk.

Biosurfactant rhamnolipid enhanced modification of corn stalk and its application for sorption of phenanthrene

The application of modified agricultural wastes for removing polycyclic aromatic hydrocarbons (PAHs) from water is gaining a growing interest. However, most modified methods using synthetic chemicals may cause secondary pollution. To overcome this limitation, in this study, a rhamnolipid modified corn stalk (RL-CS) for the removal of phenanthrene (PHE) from aqueous solution was prepared using a rhamnolipid-enhanced acid modification method. RL-CS with higher surface area and lower polarity exhibited higher PHE removal efficiency than that of raw corn stalk (RCS). The adsorption kinetics of RL-CS fitted well with pseudo-second-order kinetics (R² > 0.999). Sorption coefficients and carbon-normalized sorption coefficient of RL-CS were 4.68 and 2.86 times higher than that of RCS. Sorption process of RL-CS was nonlinear. Meanwhile, the sorption was an exothermic process and could occur spontaneously. The present study demonstrated that biosurfactant-modified biosorbent RL-CS may be of great potential for the removal of low concentrations of PAHs from the contaminated waters.

Versatile magnetic carbon nanotubes for sampling and pre concentration of pesticides in environmental water

This article describes a simple, efficient, and versatile magnetic carbon nanotubes (MCNT) method for sampling and pre-concentration of pesticides in environmental water samples. The multi-walled magnetic carbon nanotubes were obtained by chemical deposition vapor (CVD) process. The MCNTs structures are formed of hydrophobic and hydrophilic fractions that provide great dispersion at any water matrix allowing simultaneously a high efficiency of pesticides sorption. Following the extraction, analytes were desorbed with minor amounts of solvent and analyzed by gas chromatography coupled mass spectrometry (GC/MS). The parameters amount of MCNTs used to extraction, desorption time, and desorption temperature were optimized. The method showed good linearity with determination coefficients between 0.9040 and 0.9733. The limits of detection and quantification were ranged between 0.51 and 2.29µgL^-1 and between 1.19 and 5.35µgL^-1 respectively. The recovery ranged from 79.9% to 111.6%. The method was applied to the determination of fifteen multiclass pesticides in real samples of environmental water collected in Minas Gerais, Brazil.

Simultaneous Enrichment of Polycyclic Aromatic Hydrocarbons and Cu(2+) in Water Using Tetraazacalix[2]arene[2]triazine as a Solid-Phase Extraction Selector

On the basis of the definite retention mechanism proven by the stationary phase for high-performance liquid chromatography, tetraazacalix[2]arene[2]triazine featuring multiple recognition sites was assessed as a solid-phase extraction (SPE) selector. The applicability of its silica support was used for the extraction of trace amounts of polycyclic aromatic hydrocarbons (PAHs) and Cu(2+) in aqueous samples, followed by high-performance liquid chromatography fluorometric and graphite furnace atomic absorption spectrometric determination. On the basis of the π-π interaction with PAHs and the chelating interaction with Cu(2+), the simultaneous extraction of PAHs and Cu(2+) and stepwise elution through tuning the eluent were successfully achieved, respectively. The SPE conditions affecting the extraction efficiency were optimized, including type and concentration of organic modifier, sample solution pH, flow rate, and volume. As a result of the special adsorption and desorption mechanism, high extraction efficiency was achieved with relative recoveries of 94.3-102.4% and relative standard deviations of less than 10.5%. The limits of detection were obtained with 0.4-3.1 ng L(-1) for PAHs and 15 ng L(-1) for Cu(2+), respectively. The method was applied to the analyses of PAHs and Cu(2+) in Xiliu Lake water samples collected in Zhengzhou, China.