Selective molecularly imprinted polymer combined with restricted access material for in-tube SPME/UHPLC-MS/MS of parabens in breast milk samples

Simultaneous and sensitive detection of methylparaben and its metabolites by using molecularly imprinted solid-phase microextraction fiber array technique

BACKGROUND

Methylparaben (MP), a commonly used antibacterial preservative, is widely used in personal care products, foods, and pharmaceuticals. MP and its metabolites are easy to enter the water environment, and their exposure and accumulation have negative effects on the ecological environment and human health, and have endocrine disrupting activity and potential physiological toxicity. It is still the primary issue of environmental analysis and ecological risk assessment to develop simple and reliable methods for simultaneous sensitive detection of these compounds in environmental water.

RESULTS

In this paper, a flexible molecularly imprinted fiber array strategy is proposed for simultaneous enrichment and detection of trace MP and its four main metabolites. The experimental results showed that the three-fiber imprinted fiber array constructed by MP imprinted fiber had the best effect on the simultaneous enrichment of these five target analytes. The enrichment capacity of the imprinted fiber array was 214-456 times, 314-1201 times and 38-685 times that of commercial PA, PDMS and PDMS/DVB fiber arrays, respectively. The limit of detection (LOD) of this method was 0.033 μg L-1. The spiked recovery rate was 86.78-113.96 %, and RSD was less than 9.17 %. In addition, this molecularly imprinted SPME fiber array has good stability, long service life and can be used repeatedly at least 100 times.

SIGNIFICANCE

This molecularly imprinted fiber array strategy can flexibly assemble different molecularly imprinted SPME fibers together, effectively improve the enrichment ability and detection sensitivity, and achieve simultaneous selective enrichment and detection of several analytes. This is an easy, efficient and reliable method for monitoring several trace analytes simultaneously in intricate environmental matrices.

Determination of parabens in breast milk using stir bar sorptive extraction coupled with UHPLC-UV

We developed an analytical method based on ultra-high performance liquid chromatography with UV detection, using a stir bar coated with amino/hydroxyl bifunctional microporous organic network (B-MON), for the analysis of parabens in breast milk samples. B-MON demonstrated superior performance with maximal methylparaben adsorption of 112.15 mg/g. Kinetic fitting revealed that outer diffusion was the key limiting step, and the adsorption was chemisorption. The thermodynamic analysis demonstrated that increased methylparaben adsorption was found at higher temperatures in spontaneous processes. The developed approach showed excellent linearity (R2 ≥ 0.9964) and a low detection limit (0.01 μg/L). Recoveries ranged from 85.8 to 105.5 % and the relative standard deviation was lower than 9.2 %. Based on the daily exposure assessment, these pollutants do not pose unacceptable health hazards to babies. However, the high detection frequencies (41.9%-93.5 %) suggest that breast milk still should be monitored.

Development of A Liquid-Phase Microextraction Method for Simultaneous Determination of Parabens in Lipstick Samples at Trace Levels by High-Performance Liquid Chromatography

The endocrine-disrupting potential of parabens, as well as their relation to cancer, has sparked significant discussions over their impact. Consequently, analyses of cosmetic products are an essential necessity, particularly in terms of human health and safety. In this study, a highly accurate and sensitive liquid-phase-based microextraction method was developed to determine the five parabens at trace levels by high-performance liquid chromatography. All prominent parameters of the method such as extraction solvent type and amount (1,2-dichloroethane/250 μL), and dispersive solvent type and amount (isopropyl alcohol/2.0 mL) were optimized to enhance the extraction efficiency of the analytes. The mobile phase consisting of 50 mM ammonium formate aqueous solution (pH 4.0) and acetonitrile (60:40, v/v) was used to elute the analytes at a flow rate of 1.2 mL min-1 in the isocratic mode. Analytical performance of the optimum method for methyl, ethyl, propyl, butyl and benzyl parabens were determined and the analytes recorded detection limit values of 0.78, 0.75, 0.34, 0.33 and 0.75 μg kg-1, respectively. Four different lipstick samples were analyzed under optimum conditions of the developed method, and the amount of parabens quantified in the samples using matrix matched calibration standards was in the range of 0.11-1.03%.

Molecularly imprinted polymers in online extraction liquid chromatography methods: Current advances and recent applications

BACKGROUND

One of the primary objectives in green analytical practices is the seamless integration of extraction and separation steps, resulting in the augmentation of both analytical throughput and method performance. Consequently, the exploration of prospective sorbent materials has drawn significant attention in the scientific community, particularly concerning the potential for online procedures. Employing the optimal sorbent material within an automated analytical approach holds the promise of elevating the precision of the analytical evaluation. Molecularly imprinted polymers (MIPs) excel in specific analyte interaction within complex matrices. However, MIPs' full potential was not widely exploring especially for online analytical methodologies.

RESULTS

Here is presented a comprehensive overview of the current applications of MIPs as sorbent materials within integrated and automated separation methodologies applied to diverse matrices including biological, food, and environmental samples. Notably, their primary advantage, as evidenced in the literature, lies in their exceptional selectivity for the target analyte discussed according to the adopted synthesis protocol. Furthermore, the literature discussed here illustrates the versatility of MIPs in terms of modification with one or more phases which are so-called hybrid materials, such as molecularly imprinted monoliths (MIM), the molecularly imprinted ionic liquid polymer (IL-MIP), and restricted access to molecularly imprinted polymer (RAMIP). The reported advantages enhance their applicability in integrated and automated separation procedures, especially to the column switching methods, across a broader spectrum of applications.

SIGNIFICANCE

This revision aims to demonstrate the MIP's potential as a sorbent phase in integrated and automated methods, this comprehensive overview of MIP polymers in integrated and automated separation methodologies can be used as a valuable guide, inspiring new research on developing novel horizons for MIP applications to have their potential emphasized in analytical science and enhanced to the great analytical methods achievement.

Online highly selective recognition of domoic acid by an aptamer@MOFs affinity monolithic column coupled with HPLC for shellfish safety monitoring

Enabling cost-effective safety monitoring of shellfish is an important measure for the healthy development of the coastal marine economy. Herein, a new aptamer@metal-organic framework (MOF)-functionalized affinity monolithic column was proposed and applied in selective in-tube solid-phase microextraction (IT-SPME) coupled with HPLC for the accurate recognition of domoic acid (DA) in shellfish. Using a surface engineering strategy, ZIF-8 MOF was grown in situ inside the poly(epoxy-MA-co-POSS-MA) hybrid monolith. A high BET surface area and abundant metal reactive sites of the MOF framework were obtained for anchoring massive aptamers with terminal-modified phosphate groups. Various characterizations, such as SEM, elemental mapping, XRD, and BET, were performed, and the affinity performance was also studied. The presence of a massive amount of aptamers with a super coverage density of 3140 μmol L-1 bound on ZIF-8 MOF activated a high-performance bionic-affinity interface, and perfect specificity was exhibited with little interference of tissue matrixes, thus assuring the highly selective capture of DA from the complex matrixes. Under the optimal conditions, DA toxins in shellfish were detected with the limit of detection (LOD) of 7.0 ng mL-1 (equivalent to 14.0 μg kg-1), representing a 5-28 fold enhancement in detection sensitivity over traditional SPE or MIP adsorbents reported previously. The recoveries of fortified mussel and clam samples were achieved as 91.8 ± 1.2%-94.1 ± 1.9% (n = 3) and 91.2 ± 1.1%-94.5 ± 3.6% (n = 3), respectively. This work sheds light on a cost-effective method for online selective IT-SPME and the accurate monitoring of DA toxins using an aptamer@MOF-mediated affinity monolith system coupled with the inexpensive HPLC-UV technique.

Highly efficient nanocomposites based on molecularly imprinted magnetic covalent organic frameworks for selective extraction of bisphenol A from liquid matrices

Highly efficient nanocomposites, hydrophobic molecularly imprinted magnetic covalent organic frameworks (MI-MCOF), have been farbricated by a facile Schiff-base reaction. The MI-MCOF was based on terephthalaldehyde (TPA) and 1,3,5-tris(4-aminophenyl) benzene (TAPB) as functional monomer and crosslinker, anhydrous acetic acid as catalyst, bisphenol AF as dummy template, and NiFe₂O₄ as magnetic core. This organic framework significantly reduced the time consumption of conventional imprinted polymerization and avoided the use of traditional initiator and cross-linking agents. The synthesized MI-MCOF exhibited superior magnetic responsivity and affinity, as well as high selectivity and kinetics for bisphenol A (BPA) in water and urine samples. The equilibrium adsorption capacity (Q_e) of BPA on the MI-MCOF was 50.65 mg g^-1, which was 3-7-fold higher than of its three structural analogues. The imprinting factor of BPA reached up to 3.17, and the selective coefficients of three analogues were all > 2.0, evidencing the excellent selectivity of fabricated nanocomposites to BPA. Based on the MI-MCOF nanocomposites, the magnetic solid-phase extraction (MSPE), combined with HPLC and fluorescence detection (HPLC-FLD), offered superior analytical performance: wide linear range of 0.1-100 μg L^-1, high correlation coefficient of 0.9996, low limit of detection of 0.020 μg L^-1, good recoveries of 83.5-110%, and relative standard deviations (RSDs) of 0.5-5.7% in environmental water, beverage, and human urine samples. Consequently, the MI-MCOF-MSPE/HPLC-FLD method provides a good prospect in selective extraction of BPA from complex matrices while replacing traditional magnetic separation and adsorption materials.

Room temperature fabrication of magnetic covalent organic frameworks for efficient enrichment of parabens in water

A novel 4 + 2 covalent magnetic organic framework (COF) with core-shell structure was synthesized for the first time with N, N, N', N'-Tetrakis (4-aminophenyl)-1, 4- benzenediamine (TPDA) and 2, 6-Pyridinedicarboxaldehyde (PCBA) at room temperature. The synthesized magnetic TPDA-PCBA-COF has a large specific surface area and superparamagnetism, which makes it an ideal sorbent for trace analytes enrichment. To this end, we combined it with magnetic solid phase extraction (MSPE) to enrich trace parabens in environmental water. The parameters affecting the enrichment efficiency of magnetic solid phase extraction, such as the amount of Fe₃O₄@TPDA-PCBA-COF, extraction time, pH of samples, salt concentration, desorption solvent volume and desorption time, were optimized. A simple method for extraction and determination of parabens in water samples by MSPE combined with high performance liquid chromatography (HPLC) was established under optimized conditions. The validation results revealed that the linear ranges were at 1.0-5.0 × 10² ng mL^-1 with R value between 0.9915 and 0.9999, the spiked recoveries were in the range of 82.8% to 99.9% and RSDs were lower than 10%. The method was further applied to the determination of parabens in water samples, with recoveries in the range of 82.2% to 110.0% and RSDs ≤ 7.7%. These results suggest that the magnetic TPDA-PCBA-COF could be used as a promising adsorbent for efficient extraction and quantitation of parabens in environmental water samples.

Fabrication of a core-shell porphyrin-based magnetic covalent organic framework for effective extraction of PCPs in a wide polarity range

A novel porphyrin-based magnetic covalent organic framework (PCOF) was first reported by using a facile synthetic procedure. The Fe₃O₄@NH₂@PCOF nanospheres were utilized to effectively extract personal care products in a wide polarity range (log K_ow values from 1.96 to 7.60). The successful magnetic solid-phase extraction (MSPE) of target analytes could be ascribed to the sufficient oxygen-, nitrogen- and phenyl-containing functional groups of the COF layer, which are demonstrated to be of good compatibility with pollutants exhibiting different polarities by using molecular dynamics simulations, independent gradient model analysis and various characterizations. The MSPE extraction efficiency was enhanced by optimizing key parameters. The findings indicated that the method had a wide linearity range (1-500 ng mL^-1 for parabens and UV filters) and low detection limits (0.4-0.9 ng mL^-1 for parabens and 0.2-0.6 ng mL^-1 for UV filters). The accuracy was reflected by recoveries ranging from 74% to 114%. Satisfactory intra- and inter-day precisions from 3.0% to 9.8% and 0.5%-9.1% were obtained. Overall, the proposed MSPE-HPLC method is accurate and reliable for identifying parabens as well as UV filters in wastewater and swimming pool water. The potential of the method for evaluating human exposure risk was unfolded.

Recent molecularly imprinted polymers applications in bioanalysis

Molecular imprinted polymers (MIPs) as extraordinary compounds with unique features have presented a wide range of applications and benefits to researchers. In particular when used as a sorbent in sample preparation methods for the analysis of biological samples and complex matrices. Its application in the extraction of medicinal species has attracted much attention and a growing interest. This review focus on articles and research that deals with the application of MIPs in the analysis of components such as biomarkers, drugs, hormones, blockers and inhibitors, especially in biological matrices. The studies based on MIP applications in bioanalysis and the deployment of MIPs in high-throughput settings and optimization of extraction methods are presented. A review of more than 200 articles and research works clearly shows that the superiority of MIP techniques lies in high accuracy, reproducibility, sensitivity, speed and cost effectiveness which make them suitable for clinical usage. Furthermore, this review present MIP-based extraction techniques and MIP-biosensors which are categorized on their classes based on common properties of target components. Extraction methods, studied sample matrices, target analytes, analytical techniques and their results for each study are described. Investigations indicate satisfactory results using MIP-based bioanalysis. According to the increasing number of studies on method development over the last decade, the use of MIPs in bioanalysis is growing and will further expand the scope of MIP applications for less studied samples and analytes.

Polyvinyl alcohol-based hydrogel sorbent for extraction of parabens in human milk samples by in-tube SPME–LC–UV

In this work, we developed an in-tube solid-phase microextraction (SPME) device consisting of a fused silica capillary modified with a polyvinyl alcohol (PVOH) hydrogel. Methylparaben, ethylparaben, propylparaben, and butylparaben were determined in human milk samples by using the in-tube SPME device coupled with liquid chromatography with spectrophotometric detection in the ultraviolet region (LC-UV). The inner surface of the fused silica capillary was silanized to allow covalent modification with the PVOH-hydrogel, using glutaraldehyde as cross-linking agent. The developed device was used up to 250 times with no reduction in the analytes' peak areas or carryover effect, besides having a low production cost. The human milk samples showed a significant matrix effect for parabens with higher logKo/w. Low limits of quantification (LLOQ) between 10.0 and 15.0 ng mL-1 were obtained with RSD values in the range of 1.18 to 18.3%. For the intra- and inter-day assays, RSD values from 5.6 to 16.5% and accuracy from 74.5 to 128.8% were achieved. The PVOH-based hydrogel sorbent allowed the use of water as desorption solvent, eliminating the use of organic solvents, which follows the principles of green chemistry. The results showed a great application potential of the PVOH-based hydrogel sorbent for the extraction of organic compounds from high-complexity samples.

Development of novel thin-film solid-phase microextraction materials based on deep eutectic solvents for preconcentration of trace amounts of parabens in surface waters

A green and sensitive thin-film solid-phase microextraction method based on deep eutectic solvent was developed that enables simultaneous isolation, preconcentration, and determination of parabens in surface waters. Six new deep eutectic solvents were synthesized and used directly to prepare thin-film coatings on a stainless steel mesh support. Among the compounds obtained, the highest efficiency in the extraction of parabens was found for a material consisting of trihexyltetradecylphosphonium chloride and n-docosanol in a molar ratio of 1:2. For the proposed method, parameters affecting the extraction efficiency of parabens, such as the coating material, the desorption solvent, the volume of the sample, the pH of the sample, the extraction and desorption time, and the salting-out effect, were optimized. Under optimal conditions, the proposed method allowed us to achieve good precision between 3.6 and 6.5% and recovery ranging from 68.1 to 91.4%. The limits of detection range from 0.018 to 0.055 ng mL^-1 . This article is protected by copyright. All rights reserved.

Concentrations of bisphenols, parabens, and benzophenones in human breast milk: A systematic review and meta-analysis

BACKGROUND

Breast milk is the main source of nutrition for infants but may be responsible for their exposure to environmental chemicals, including endocrine-disrupting chemicals.

AIM

To review available evidence on the presence and concentrations of bisphenols, parabens (PBs), and benzophenones (BPs) in human milk and to explore factors related to exposure levels.

METHODS

A systematic review was carried out using Medline, Web of Science, and Scopus databases, conducting a comprehensive search of peer-reviewed original articles published during the period 2000-2020, including epidemiological and methodological studies. Inclusion criteria were met by 50 studies, which were compiled by calculating weighted detection frequencies and arithmetic mean concentrations of the chemicals. Their risk of bias was assessed using the ROBINS-I checklist.

RESULTS

Among the 50 reviewed studies, concentrations of bisphenols were assessed by 37 (74.0%), PBs by 21 (42.0%), and BPs by 10 (20.0%). Weighted detection frequencies were 63.6% for bisphenol-A (BPA), 27.9-63.4% for PBs, and 39.5% for benzophenone-3 (BP-3). Weighted mean concentrations were 1.4 ng/mL for BPA, 0.2-14.2 ng/mL for PBs, and 24.4 ng/mL for BP-3. Mean concentrations ranged among studies from 0.1 to 3.9 ng/mL for BPA, 0.1 to 1063.6 ng/mL for PBs, and 0.5 to 72.4 ng/mL for BP-3. The highest concentrations of BPA and PBs were reported in samples from Asia (versus America and Europe). Higher BPA and lower methyl-paraben concentrations were observed in samples collected after 2010. Elevated concentrations of these chemicals were associated with socio-demographic and lifestyle factors in eight studies (16.0%). Two epidemiological studies showed moderate/serious risk of bias.

CONCLUSIONS

This systematic review contributes the first overview of the widespread presence and concentrations of bisphenols, PBs, and BPs in human breast milk, revealing geographical and temporal variations. The methodological heterogeneity of published studies underscores the need for well-conducted studies to assess the magnitude of exposure to these chemicals from human milk.

Nicotine in Complex Samples: Recent Updates on the Pretreatment and Analysis Method

Nicotine is a significant evaluation index of tobacco and its related products' quality, but nicotine overdose can pose serious health hazards and cause addiction and dependence, thus it can be seen that it is necessary to find suitable and efficient detection methods to precisely detect nicotine in diverse samples and complex matrices. In this review, an updated summary of the latest trends in pretreatment and analytical techniques for nicotine is provided. We reviewed various sample pretreatment methods, such as solid phase extraction, solid phase microextraction, liquid phase microextraction, QuEChERS, etc., and diverse nicotine assay methods including liquid chromatography, gas chromatography, electrochemical sensors, etc., focusing on the developments since 2015. Furthermore, the recent progress in the applications and applicability of these techniques as well as our prospects for future developments are discussed.HighlightsUpdated pretreatment and analysis methods of nicotine were systematically summarized.Microextraction and automation were main development trends of nicotine pretreatment.The introduction of novel materials added luster to nicotine pretreatment.The evolutions of ion source and mass analyzer were emphasized.

Advanced microextraction techniques for the analysis of amphetamines in human breast milk and their comparison with conventional methods

Breast milk analysis provides useful information about acute newborn exposure to harmful substances, such as psychoactive drugs abused by a nursing mother. Since breast milk represents a complex matrix with large amounts of interfering compounds, a comprehensive sample pre-treatment is necessary. This work focuses on determination of amphetamines and synthetic cathinones in human breast milk by microextraction techniques (liquid-phase microextraction and electromembrane extraction), and their comparison to more conventional treatment methods (protein precipitation, liquid-liquid extraction, and salting-out assisted liquid-liquid extraction). The aim of this work was to optimize and validate all the extraction procedures and thoroughly assess their advantages and disadvantages with special regard to their routine clinical use. The applicability of the extractions was further verified by the analysis of six real samples collected from breastfeeding mothers suspected of amphetamine abuse. The membrane microextraction techniques turned out to be the most advantageous as they required low amounts of organic solvents but still provided efficient sample clean-up, excellent quantification limit (0.5 ng mL^-1), and good recovery (81-91% and 40-89% for electromembrane extraction and liquid-phase microextraction, respectively). The traditional liquid-liquid extraction as well as the salting-out assisted liquid-liquid extraction showed comparable recoveries (41-85% and 63-88%, respectively), but higher quantification limits (2.5 ng mL^-1 and 5 ng mL^-1, respectively). Moreover, these methods required multiple operating steps and were time consuming. Protein precipitation was fast and simple, but it demonstrated poor sample clean-up, low recovery (56-58%) and high quantification limit (5 ng mL^-1). Based on the overall results, microextraction methods can be considered promising candidates, even for routine laboratory use.

Review of the safety of application of cosmetic products containing parabens

Cosmetics are a source of lifetime exposure to various substances including parabens, being the most popular synthetic preservatives. Because the use of cosmetics shows an increasing trend and some adverse health outcomes of parabens present in these products have been reported, the present review focused on the safety of dermal application of these compounds. Special attention has been paid to the absorption of parabens and their retention in the human body in the intact form, as well as to their toxicological characteristics. Particular emphasis has been placed on the estrogenic potential of parabens. Based on the available published data of the concentrations of parabens in various kinds of cosmetics, the average ranges of systemic exposure dose (SED) for methylparaben, ethylparaben, propylparaben, and butylparaben have been calculated. Safety evaluations [margin of safety (MoS)] for these compounds, based on their aggregate exposure, have also been performed. Moreover, evidence for the negative impact of methylparaben on skin cells has been provided, and the main factors that may intensify dermal absorption of parabens and their impact on the skin have been described. Summarizing, the use of single cosmetics containing parabens should not pose a hazard for human health; however, using excessive quantities of cosmetic preparations containing these compounds may lead to the development of unfavorable health outcomes. Due to the real risk of estrogenic effects, as a result of exposure to parabens in cosmetics, simultaneous use of many cosmetic products containing these preservatives should be avoided.

Determination of six parabens in biological samples by magnetic solid-phase extraction with magnetic mesoporous carbon adsorbent and UHPLC-MS/MS

Although parabens are useful due to their antiseptic properties, their widespread use has caused concerns regarding their potential toxicological effects. In this study, a novel magnetic solid-phase extraction combined with ultra-high-performance liquid chromatography-tandem mass spectrometry (MSPE-UHPLC-MS/MS) was developed, based on ordered magnetic mesoporous carbon (MMC), for paraben analysis. The MMC was prepared by soft-template synthesis, with a unique pore structure and a highly specific surface response, indicating potential as an excellent adsorbent. Several parameters affecting the paraben extraction efficiency were investigated and a novel method for paraben analysis in serum and urine samples using MSPE-UHPLCMS/MS was developed. The concentrations of methylparaben, ethylparaben, isopropylparaben, and propylparaben in these samples were 0.0380-4.36, 0.460-9.65, 0.0118-0.770, and 0.0363-0.641 μg/L, respectively, whereas isobutylparaben and butylparaben were not detected. Furthermore, satisfactory recoveries of 76.4-121% with relative standard deviations (n = 5) of 1.9-8.6% were obtained. Therefore, the developed MSPE-UHPLC-MS/MS method was efficient, highly sensitive, and reliable for analysing parabens in complex biological samples.

Exposure to ethylparaben and propylparaben interfere with embryo implantation by compromising endometrial decidualization in early pregnant mice

Ethylparaben (EtP) and propylparaben (PrP) are common preservatives and well-known endocrine-disrupting chemicals. Studies have demonstrated that they can reduce female fertility, but the underlying mechanism, especially that on embryo implantation, is still poorly understood. Endometrial decidualization is a critical event for embryo implantation. In this study, we aimed to explore the effects of EtP/PrP on endometrial decidualization. Pregnant mice were dosed daily by oral gavage with EtP at 0, 400, 800 and 1600 mg/kg or with PrP at 0, 625, 1250 and 2500 mg/kg from Day 1 of pregnancy until sacrifice. The results showed that the rate of pregnant mice with impaired embryo implantation, whose number of implantation sites was less than 7, was significantly increased after exposure to 1600 mg/kg EtP or 2500 mg/kg PrP. Further study found that the expression of endometrial decidualization markers HOXA10, MMP9 and PR was significantly downregulated in 1600 mg/kg EtP group and 2500 mg/kg PrP group. Notably, serum oestrogen and progesterone levels were significantly increased, whereas the expression of uterine oestrogen receptor and progesterone receptor was decreased following 1600 mg/kg EtP or 2500 mg/kg PrP exposure. In the breeding test, fewer offspring were found after females were exposed to 1600 mg/kg EtP or 2500 mg/kg PrP in early pregnancy. This demonstrated that exposure to EtP/PrP interfered with embryo implantation by compromising endometrial decidualization in early-stage pregnant mice. Disorders of reproductive hormones and hormone receptor signals could be responsible for impaired decidualization. This study broadened the understanding on the biological safety of EtP and PrP.

Restricted Access Molecularly Imprinted Polymers

The use of conventional molecularly imprinted polymers (MIPs) for biological sample preparation is a difficult procedure due to the presence of high concentrations of proteins which can obstruct the selective binding sites, decrease the adsorption capacity, and compromise the analytical validation. In this way, modifications of conventional MIPs have been carried out in order to give them the ability to exclude macromolecules. Superficial coverings with hydrophilic groups and/or proteins have been the main procedures to obtain these restricted access molecularly imprinted polymers (RAMIPs ). These materials have been efficiently used for the selective extraction of small molecules from untreated complex matrices (e.g., blood, plasma, serum, and milk), without the need of a pre-deproteinization step. In this chapter, we describe a generic synthesis protocol to obtain RAMIPs as well as the assays to evaluate the protein exclusion efficiency and possible applications in offline and online procedures.

In-tube solid-phase microextraction: Current trends and future perspectives

In-tube solid-phase microextraction (IT-SPME) was developed about 24 years ago as an effective sample preparation technique using an open tubular capillary column as an extraction device. IT-SPME is useful for micro-concentration, automated sample cleanup, and rapid online analysis, and can be used to determine the analytes in complex matrices simple sample processing methods such as direct sample injection or filtration. IT-SPME is usually performed in combination with high-performance liquid chromatography using an online column switching technology, in which the entire process from sample preparation to separation to data analysis is automated using the autosampler. Furthermore, IT-SPME minimizes the use of harmful organic solvents and is simple and labor-saving, making it a sustainable and environmentally friendly green analytical technique. Various operating systems and new sorbent materials have been developed to improve its extraction efficiency by, for example, enhancing its sorption capacity and selectivity. In addition, IT-SPME methods have been widely applied in environmental analysis, food analysis and bioanalysis. This review describes the present state of IT-SPME technology and summarizes its current trends and future perspectives, including method development and strategies to improve extraction efficiency.

Synthesis of Magnetic Molecularly Imprinted Polymer Sorbents for Isolation of Parabens from Breast Milk

Magnetic molecularly imprinted polymers (MMIPs) are an invaluable asset in the development of many methods in analytical chemistry, particularly sample preparation. Novel adsorbents based on MMIPs are characterized by high selectivity towards a specific analyte due to the presence of a specific cavity on their polymer surface, enabling the lock-key model interactions to occur. In addition, the magnetic core provides superparamagnetic properties that allow rapid separation of the sorbent from the sample solution. Such a combination of imprinted polymers with a magnetic core has an innovative influence on the development of separation techniques. Hence, the present study describes the synthesis of MMIPs with 17β-estradiol used as a template molecule in the production of imprinted polymers. The as-prepared sorbent was used for a sorption/desorption study of five parabens from breast milk samples. The obtained results were characterized by sorption efficiency exceeding 92%, which shows the high affinity of the analytes to the functional groups on the sorbent. The final determination of the selected analytes was done with high-performance liquid chromatography using a fluorometric detector. The determined linearity ranges for selected parabens were characterized by high determination coefficients (r² from 0.9992 to 0.9999), and the calculated limit of detection (LOD) and limit of quantification (LOQ) for the identified compounds were low (LOD from 1.1-2.7 ng mL^-1; LOQ from 3.6-8.1 ng mL^-1), which makes their quantitative analysis in real samples feasible.

Coiled molecularly imprinted polymer layer open-tubular capillary tube for detection of parabens in personal care and cosmetic products

Personal care and cosmetic products (PCPs) are the primary exposure pathway of humans to parabens and their safety has become a public concern. However, sample pretreatment of PCPs is a great challenge due to their complexities and diversity. In this study, epoxide modified molecularly imprinted polymers (MIPs) were synthesized using ethylparaben as a template, methacrylic acid and isobutyl vinyl ether as co-monomers and glycidilmethacrylate as a post-modified monomer. MIP layer open-tubular tubes were prepared by modifying branched polyethylenimine and then grafting MIPs onto the inner surface of Teflon capillary tubes. The tube was coiled to effectively increase mass transfer and coupled to an HPLC-UV system for parabens detection in PCPs. Matrix interference was significantly decreased while efficient enrichment and recoveries were obtained. Under optimized conditions, the linear range for parabens detection was 0.5-600 ng mL^-1 with detection limits of 0.2 to 0.3 ng mL^-1. The system was used to study the contents of parabens in popular PCPs. The concentrations of parabens in 108 PCPs ranged from <0.5 ng g^-1 to 2856 μg g^-1 with geometric mean of 250.3 μg g^-1. Almost all of the products contained at least one kind of parabens; methyl paraben (geometric mean: 182.9 μg g^-1) and n-propyl paraben (geometric mean: 42.5 μg g^-1) were the predominant compounds had been found in the samples. This method could be useful for human exposure assessment towards parabens.

Biomonitoring of parabens in human milk and estimated daily intake for breastfed infants

In this study, we assessed the presence of four parabens in human milk of 120 mothers from Valencia (Spain) which took part in a human biomonitoring project (BETTERMILK). The detection frequency ranges of parabens were 41-60% and 61-89% for unconjugated- and total (unconjugated + conjugated)-parabens, respectively. The concentrations ranged from <LoQ to 31 ng/mL and from <LoQ to 49 ng/mL for unconjugated- and total-parabens, respectively. The frequency of use of some cosmetic products and human milk protein levels were the main predictors of parabens in milk. The study evidences the presence of both conjugated and unconjugated paraben forms in human milk. The newborns estimated daily intake of parabens through human milk was several orders of magnitude lower than the 0-10 mg/kg bw-day acceptable daily intake for the sum of methyl and ethyl paraben established by EFSA. To our knowledge, this is currently the largest biomonitoring study of parabens in human milk.

Serum analysis in women and in vitro skin assay for the assessment of exposure to parabens in antiperspirants

The present study assessed the exposure to methylparaben (MP) and propylparaben (PP) from antiperspirants in serum of 24 women aged 20-30 years old and an in vitro skin assay. An effective liquid chromatography-tandem mass spectrometry method for the determination of MP and PP levels in serum was developed and validated in the range of 10-100 μg/L; the method was fast, simple, sensitive, linear, precise, and accurate. In addition, a simple and rapid liquid chromatography-ultraviolet detection method for the determination of MP and PP levels in antiperspirants was developed and validated in the range of 2-26 mg/L, which presented satisfactory linearity, precision, and accuracy. Using these two methods, 20 commercial antiperspirants were evaluated, and only three showed MP and PP in the formulation. The antiperspirant containing 0.2% and 0.1% w/w MP and PP, respectively, was given to the volunteers, to estimate the internal dose, and submitted to a pig ear skin permeation assay in Franz diffusion cells, presenting a permeation flux of 32% for MP and 71% for PP. In this assay, both MP and PP permeated the skin; however, there was no correlation between antiperspirant use and paraben serum concentration in the volunteers. Graphical abstract.

Parabens in breast milk and possible sources of exposure among lactating women in Korea

Parabens, broad-spectrum antimicrobial preservatives widely used in various consumer products and food, are suspected to be linked with several adverse health effects in humans, especially newborn babies, infants, and young children. While human exposure to parabens has been frequently reported by measuring the concentration of parabens in urine, similar measurements in breast milk have rarely been made. To determine paraben concentrations in breast milk and possible sources of exposure, four major parabens, including methylparaben (MP), ethylparaben (EP), propylparaben (PP), and butylparaben (BP) were measured in breast milk samples collected from 260 lactating women in South Korea. Demographic, socioeconomic, and behavioral factors associated with the presence of parabens in breast milk were determined. EP concentrations were detected at the highest levels in breast milk samples, followed by MP, PP, and BP. Pre-pregnancy BMI, parity, use of basic skin care products, use of cosmetics, canned beverage, and type of milk consumption were associated with higher frequencies of paraben detection. In addition, type of milk, parity, and drinking status were significantly associated with the concentration of EP. Multiple regression analyses showed that colostrum and transitional milk samples had higher levels of EP than mature milk samples. The estimated daily intake of parabens in infants via breastfeeding appears to be negligible when compared to the acceptable daily intake values set forth by the European Food Safety Authority (EFSA); however, considering the vulnerability of breastfed infants and ubiquitous sources of exposure from daily use of household and personal toiletries, efforts to identify sources and mitigate exposure are warranted.

Variations, Determinants, and Coexposure Patterns of Personal Care Product Chemicals among Chinese Pregnant Women: A Longitudinal Study

Exposure to mixtures of personal care product chemicals (PCPCs) is commonplace among the Chinese population; yet, limited data are available on the variations, determinants, and coexposure patterns of PCPCs, particularly among pregnant women at multiple time points during gestation. Here, we measured concentrations of 11 most common PCPCs (five parabens, five benzophenones, and triclosan) in 2823 urine samples collected from 941 pregnant women over three trimesters. Based on the quantification results, we calculated the intraclass correlation coefficient (ICC) to assess within-person variability of targeted compounds, applied linear mixed mode models to explore associations between urinary concentrations of PCPCs and exposure-related factors, and used percentile analysis to evaluate exposure to specific or multiple chemicals at one or three trimesters. Seven targeted compounds: methylparaben (MeP), ethylparaben (EtP), propylparaben (PrP), 4-hydroxybenzophenone (4-OH-BP), 2,4-dihydroxybenzophenone (BP-1), 2-hydroxy-4-methoxybenzophenone (BP-3), and triclosan (TCS) were detected in over 66% of samples. The median urinary concentrations (ng/mL) of MeP, EtP, PrP, 4-OH-BP, BP-1, BP-3, and TCS were 15.44, 0.49, 0.61, 0.16, 0.25, 0.53, and 0.48, respectively. We observed that benzophenones (ICC: 0.46-0.55) and triclosan (ICC: 0.50) were less variable than parabens (ICC: 0.35-0.40). Urinary levels of parabens were related to physical activity frequency; urinary levels of benzophenones were associated with the refurbishment of homes and household income, and urinary levels of triclosan were contingent upon the personal basic information (prepregnancy body mass index and age). Notably, higher levels of benzophenones and triclosan but lower paraben levels were observed in summer than in winter. Both coexposure to high percentiles of multiple pollutants at one trimester and exposure to one pollutant at high-dose through three trimesters were rare in the study population. Our findings suggest that these exposure-related factors should be taken into consideration, and health risks should be assessed on mixtures of pollutants in future epidemiological studies.

Butyl Methacrylate-Co-Ethylene Glycol Dimethacrylate Monolith for Online in-Tube SPME-UHPLC-MS/MS to Determine Chlopromazine, Clozapine, Quetiapine, Olanzapine, and Their Metabolites in Plasma Samples

This manuscript describes a sensitive, selective, and online in-tube solid-phase microextraction coupled with an ultrahigh performance liquid chromatography-tandem mass spectrometry (in-tube SPME-UHPLC-MS/MS) method to determine chlopromazine, clozapine, quetiapine, olanzapine, and their metabolites in plasma samples from schizophrenic patients. Organic poly(butyl methacrylate-co-ethylene glycol dimethacrylate) monolith was synthesized on the internal surface of a fused silica capillary (covalent bonds) for in-tube SPME. Analyte extraction and analysis was conducted by connecting the monolithic capillary to an UHPLC-MS/MS system. The monolith was characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectrometry (FTIR). The developed method presented adequate linearity for all the target antipsychotics: R² was higher than 0.9975, lack-of-fit ranged from 0.115 to 0.955, precision had variation coefficients lower than 14.2%, and accuracy had relative standard error values ranging from -13.5% to 14.6%, with the exception of the lower limit of quantification (LLOQ). The LLOQ values in plasma samples were 10 ng mL^-1 for all analytes. The developed method was successfully applied to determine antipsychotics and their metabolites in plasma samples from schizophrenic patients.

A new restricted access molecularly imprinted fiber for direct solid phase microextraction of benzodiazepines from plasma samples

Restricted access molecularly imprinted polymers (RAMIPs) are hybrid materials that present selective binding sites for a template (or similar molecules), and an external hydrophilic layer that avoids the binding of proteins to the material, making them appropriate for the sample preparation of protein fluids.

Parabens and their effects on the endocrine system

Preservatives (ingredients which inhibit growth of microorganisms) are used to prolong shelf life of various foods, cosmetics, and pharmaceutical products. Parabens are one of the most popular preservatives used in the aforementioned products and is currently being used worldwide. Parabens are easily absorbed by the human body. Thus, it is important to discuss about their safety with respect to human physiology. In view of the current literature, which classifies parabens as a group of endocrine disrupting chemicals (EDCs), it seems that the precise assessment of their influence on the human endocrine system is particularly important. Disruption of the endocrine homoeostasis might lead to multidirectional implications causing disruption of fitness and functions of the body. Therefore, in this review article, we aimed to summarize the current literature on properties, occurrence, and metabolism of parabens as well as to present recent progress in knowledge about their influence on the human endocrine system.