A highly sensitive fluorescent turn-on biosensor for glycoproteins based on boronic acid functional polymer capped Mn-doped ZnS quantum dots

A double boronic acid affinity "sandwich" SERS biosensor based on magnetic boronic acid controllable-oriented imprinting for high-affinity biomimetic specific recognition and rapid detection of target glycoproteins

Transferrin (TRF), recognized as a glycoprotein clinical biomarker and therapeutic target, has its concentration applicable for disease diagnosis and treatment monitoring. Consequently, this study developed boronic acid affinity magnetic surface molecularly imprinted polymers (B-MMIPs) with pH-responsitivity as the "capture probe" for TRF, which have high affinity similar to antibodies, with a dissociation constant of (3.82 ± 0.24) × 10-8 M, showing 7 times of reusability. The self-copolymerized imprinted layer synthesized with dopamine (DA) and 3-Aminophenylboronic acid (APBA) as double monomers avoided nonspecific binding sites and produced excellent adsorption properties. Taking the gold nanostar (AuNS) with a branch tip "hot spot" structure as the core, the silver-coated AuNS functionalized with the biorecognition element 4-mercaptophenylboronic acid (MPBA) was employed as a surface-enhanced Raman scattering (SERS) nanotag (AuNS@Ag-MPBA) to label TRF, thereby constructing a double boronic acid affinity "sandwich" SERS biosensor (B-MMIPs-TRF-SERS nanotag) for the highly sensitive detection of TRF. The SERS biosensor exhibited a detection limit for TRF of 0.004 ng/mL, and its application to spiked serum samples confirmed its reliability and feasibility, demonstrating significant potential for clinical TRF detection. Moreover, the SERS biosensor designed in this study offers advantages in stability, detection speed (40 min), and cost efficiency. The portable Raman instrument for SERS detection fulfills the requirements for point-of-care testing.

A multilocus-dendritic boronic acid functionalized magnetic nanoparticle for capturing circulating tumor cells in the peripheral blood of mice with metastatic breast cancer

BACKGROUND

Dynamic fluctuation of circulating tumor cells (CTCs) can serve as an indicator of tumor progression. However, the sensitive isolation of CTCs remains extremely challenging due to their rarity and heterogeneity. Against this dilemma, dendritic boronic acid-modified magnetic nanoparticles (MNPs) were prepared in this study, and polyethyleneimine (PEI) was utilized as a scaffold to significantly increase the number of boronic acid moieties. Then the novel developed material was applied to monitor the number of CTCs in mice with metastatic breast cancer to evaluate the therapeutic effects of matrine (Mat), doxorubicin (Dox), and Mat in combination with Dox.

RESULTS

Compared to the low binding capacity of a single boronic acid ligand, dendritic boronic acid shows enhanced sensitivity in binding to sialic acid (SA), which is overexpressed in CTCs. The results showed that the capture efficiency of this modified material could achieve 94.7% and successfully captured CTCs in blood samples from mice with metastatic breast cancer. The CTC counts were consistent with the results of the pathologic examination, demonstrating the reliability and utility of the method.

SIGNIFICANCE

The dendritic boronic acid nanomaterials prepared in this study showed high specificity, sensitivity, and accuracy for cancer cell capture. The approach is expected to provide new insights into cancer diagnosis, personalized therapy, and optimization of treatment regimens.

Pro-fluorescent probe with morpholine moiety and its reactivity towards selected biological oxidants

Biological oxidants participate in many processes in the human body. Their excessive production causes organelle damage, which may result in the accumulation of cytotoxic mediators and cell degradation and may manifest itself in various diseases. Peroxynitrite (ONOO- ), hypochlorous acid (HOCl), hydrogen peroxide (H2 O2 ), and peroxymonocarbonate (HOOCO2 - ) are important oxidants in biology, toxicology, and various pathologies. Derivatives of coumarin, containing an oxidant-sensitive boronate group, have been recently developed for the fluorescent detection of inflammatory oxidants. Here, we report the synthesis and characterization of 4-[2-(morpholin-4-yl)-2-oxoethyl]-2-oxo-2H-chromen-7-yl boronic acid (MpC-BA) as a fluorescent probe for the detection of oxidants, with better solubility in water, high stability and fast response time toward peroxynitrite and hypochlorous acid. The effectiveness of the MpC-BA probe for the detection of peroxynitrite was measured by adding bolus ONOO- or using the co-generating superoxide and nitrogen oxide system. MpC-BA is oxidized by ONOO- to 7-hydroxy-4-[2-(morpholin-4-yl)-2-oxoethyl]-2H-chromen-2-one (MpC-OH). However, peroxynitrite-specific product (MpC-H) is formed in the minor reaction pathway. MpC-OH is also yielded in the reaction of MpC-BA with HOCl, and the subsequent formation of a chlorinated MpC-OH gives a specific product for HOCl (MpC-OHCl). H2 O2 slowly oxidizes MpC-BA. However, the addition of NaHCO3 increased the MpC-OH formation rate. We conclude that MpC-BA is potentially an improved fluorescent probe detecting peroxynitrite and hypochlorite in biological settings. Complementation of the fluorescence measurements by HPLC-based identification of chlorinated and reduced coumarin(s) will help identify the oxidants detected.

Biosensors with Boronic Acid-Based Materials as the Recognition Elements and Signal Labels

It is of great importance to have sensitive and accurate detection of cis-diol-containing biologically related substances because of their important functions in the research fields of metabolomics, glycomics, and proteomics. Boronic acids can specifically and reversibly interact with 1,2- or 1,3-diols to form five or six cyclic esters. Based on this unique property, boronic acid-based materials have been used as synthetic receptors for the specific recognition and detection of cis-diol-containing species. This review critically summarizes the recent advances with boronic acid-based materials as recognition elements and signal labels for the detection of cis-diol-containing biological species, including ribonucleic acids, glycans, glycoproteins, bacteria, exosomes, and tumor cells. We also address the challenges and future perspectives for developing versatile boronic acid-based materials with various promising applications.

A Highly Selective and Sensitive Fluorescent Sensor Based on Molecularly Imprinted Polymer-Functionalized Mn-Doped ZnS Quantum Dots for Detection of Roxarsone in Feeds

Roxarsone (ROX) as an organoarsenic feed additive has been widely used in livestock breeding and poultry industry, but ROX can degrade into highly toxic inorganic arsenic species in natural environments to threaten to the environment and human health. Therefore, there is a considerable interest in developing convenient, selective and sensitive methods for the detection of ROX in livestock breeding and poultry industry. In this work, a fluorescent molecularly imprinted polymer (MIPs) probe based on amino-modified Mn-ZnS quantum dots (QDs) has been developed by sol-gel polymerization for specific recognition of ROX. The synthesized MIPs-coated Mn-ZnS QDs (MIPs@Mn-ZnS QDs) have highly selective recognition sites to ROX because there are multi-interactions among the template ROX, functional monomer phenyltrimethoxysilane and the amino-functionalized QDs such as the π-π conjugating effect, hydrogen bonds. Under the optimal conditions, an obvious fluorescence quenching was observed when ROX was added to the solution, and the quenching mechanism could be explained as the photo-induced electron transfer. The MIPs@Mn-ZnS QDs sensor exhibited sensitive response to ROX in the linear range from 3.75 × 10^-8 M to 6.25 × 10^-7 M (R² = 0.9985) and the limit of detection down to 4.34 nM. Moreover, the fluorescence probe has been applied to the quantitative detection of ROX in feed samples, and the recovery was in the range of 91.9% to 108.0%. The work demonstrated that the prepared MIPs@Mn-ZnS QDs probe has a good potential for rapid and sensitive determination of ROX in complicated samples.

Construction of a photo-controlled fluorescent switching with diarylethene modified carbon dots

Photo-controlled fluorescent switching is of great utility in fluorescence sensors, reversible data storage, and logic circuit, based on their modifiable emission intensity and spectra. In this work, a novel photo-controlled reversible fluorescent switching system was constructed based on photochromic diarylethene (DT) molecular modified fluorescent carbon dots (CDs). The fluorescent CDs acted as fluorescent donors and the photochromic diarylethene molecular functioned as acceptors in this fluorescent switching system. The fluorescence modulation efficiency of the fluorescent switching was determined to be 97.1%. The result was attributable to Förster resonance energy transfer between the CDs and the diarylethene molecular. The fluorescent switching could undergo 20 cycles without significant decay.

Fluorescent-based nanosensors for selective detection of a wide range of biological macromolecules: A comprehensive review

Thanks to their unique attributes, such as good sensitivity, selectivity, high surface-to-volume ratio, and versatile optical and electronic properties, fluorescent-based bioprobes have been used to create highly sensitive nanobiosensors to detect various biological and chemical agents. These sensors are superior to other analytical instrumentation techniques like gas chromatography, high-performance liquid chromatography, and capillary electrophoresis for being biodegradable, eco-friendly, and more economical, operational, and cost-effective. Moreover, several reports have also highlighted their application in the early detection of biomarkers associated with drug-induced organ damage such as liver, kidney, or lungs. In the present work, we comprehensively overviewed the electrochemical sensors that employ nanomaterials (nanoparticles/colloids or quantum dots, carbon dots, or nanoscaled metal-organic frameworks, etc.) to detect a variety of biological macromolecules based on fluorescent emission spectra. In addition, the most important mechanisms and methods to sense amino acids, protein, peptides, enzymes, carbohydrates, neurotransmitters, nucleic acids, vitamins, ions, metals, and electrolytes, blood gases, drugs (i.e., anti-inflammatory agents and antibiotics), toxins, alkaloids, antioxidants, cancer biomarkers, urinary metabolites (i.e., urea, uric acid, and creatinine), and pathogenic microorganisms were outlined and compared in terms of their selectivity and sensitivity. Altogether, the small dimensions and capability of these nanosensors for sensitive, label-free, real-time sensing of chemical, biological, and pharmaceutical agents could be used in array-based screening and in-vitro or in-vivo diagnostics. Although fluorescent nanoprobes are widely applied in determining biological macromolecules, unfortunately, they present many challenges and limitations. Efforts must be made to minimize such limitations in utilizing such nanobiosensors with an emphasis on their commercial developments. We believe that the current review can foster the wider incorporation of nanomedicine and will be of particular interest to researchers working on fluorescence technology, material chemistry, coordination polymers, and related research areas.

Solochrome Dark Blue Azo Dye Removal by Sonophotocatalysis Using Mn2+ Doped ZnS Quantum Dots

This work investigates the degradation of the azo dye solochrome dark blue (SDB) by measurement of the photocatalytic, sonocatalytic and sonophotocatalytic activities, under low ultrasonic frequency (40 kHz) and UV-C (254 nm) light, using Mn-doped ZnS semiconductor quantum dots (Mn2+:ZnS Qds) as catalysts, prepared by a simple chemical precipitation procedure. In order to study the different morphological and optical crystal properties, various characterization techniques were used, such as high resolution transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray analysis, X-ray diffraction, N2 adsorption-desorption at −196 °C and ultraviolet-visible spectroscopy. The average particle size of the semiconductor Qds was in the range of 3–4 nm. The optimal parameters affecting dye degradation, such as the catalyst loading, solution pH, time of irradiation, initial concentration of dye, dopant concentration, ultrasonic power and frequency effect were evaluated. The synthesized catalytic material exhibited a high activity for sonophotocatalytic degradation of SDB (89%), larger than that observed for sonocatalysis (69.7%) or photocatalysis (55.2%) alone, which was due to the improved electron-holes separation, formation of more reactive radicals and enhancement of the active surface area. Qds showed good stability and reusability after five repeated cycles. Finally, the degradation products were identified by liquid chromatography-mass spectrometry (LC-MS).

The Preparation of CuInS2-ZnS-Glutathione Quantum Dots and Their Application on the Sensitive Determination of Cytochrome c and Imaging of HeLa Cells

Cytochrome c (Cyt c), one of the most significant proteins acting as an electron transporter, plays an important role during the transferring process of the energy in cells. Apoptosis, one of the major forms of cell death, has been associated with various physiological regularity and pathological mechanisms. It was found that Cyt c can be released from mitochondria to cytosol under different pathological conditions, triggering subsequent cell apoptosis. Herein, we developed a fluorescence nanoprobe based on negatively charged CuInS₂-ZnS-GSH quantum dots (QDs) for the sensitive determination of Cyt c. CuInS₂-ZnS-GSH QDs with high photochemical stability and favorable hydrophilicity were prepared by a simple hot reflux method and emit a bright orange-red light. The electron-deficient heme group in Cyt c is affiliated with the electron-rich CuInS₂-ZnS-GSH QDs through the photo-induced electron transfer process, resulting in a large decrease in fluorescence intensity of QDs. A good linearity for concentration of Cyt c in the range of 0.01-7 μmol L^-1 is obtained, and the detection limit of Cyt c is as low as 1.1 nM. The performance on the detection of Cyt c in spiked human serum and fetal bovine serum samples showed good recoveries from 85.5% to 95.0%. Furthermore, CuInS₂-ZnS-GSH QDs were applied for the intracellular imaging in HeLa cells showing an extremely lower toxicity and excellent biocompatibility.

A functional ratio fluorescence sensor platform based on the graphene/Mn-ZnS quantum dots loaded with molecularly imprinted polymer for selective and visual detection sinapic acid

A functional ratio fluorescence sensor based on the molecularly imprinted polymer (MIP) coated double quantum dots (QDs) being composited of Mn-ZnS QDs and silica-coated graphene quantum dots (GQDs@SiO₂) had been established for the sensitive, selective and visual detection of sinapic acid (SA). MIPs@Mn-ZnS/GQDs@SiO₂ was synthesized through a simple one-pot sol-gel reaction, and it exhibited two fluorescence emission peaks with yellow fluorescence of Mn-ZnS QDs at 580 nm and the blue fluorescence of GQDs at 445 nm. SA can selectively enhance the fluorescence of GQDs but quench the Mn-ZnS QDs fluorescence to the MIPs@Mn-ZnS/GQDs@SiO₂. The ratio of fluorescence enhancement to fluorescence reduction is linear with the concentration of SA from 9 to 81 nM with the detection limits of 0.8388 nM (S/N = 3). And the constructed fluorescent probe can also be used to visually detect SA according to the change of color. More importantly, molecular imprinting technique enables the sensors to selectively recognize the SA while other similar structure molecules hardly interfere with the SA determination in the measurement environment. Meanwhile, the fluorescence sensors have the advantages of fast response time and long duration of fluorescence intensity. These excellent performances made the proposed method to be applied for the determination of SA in Semen Sinapis and Descurainiae Semen.

Nanomaterial-mediated autophagy: coexisting hazard and health benefits in biomedicine

BACKGROUND

Widespread biomedical applications of nanomaterials (NMs) bring about increased human exposure risk due to their unique physicochemical properties. Autophagy, which is of great importance for regulating the physiological or pathological activities of the body, has been reported to play a key role in NM-driven biological effects both in vivo and in vitro. The coexisting hazard and health benefits of NM-mediated autophagy in biomedicine are nonnegligible and require our particular concerns.

MAIN BODY

We collected research on the toxic effects related to NM-mediated autophagy both in vivo and in vitro. Generally, NMs can be delivered into animal models through different administration routes, or internalized by cells through different uptake pathways, exerting varying degrees of damage in tissues, organs, cells, and organelles, eventually being deposited in or excreted from the body. In addition, other biological effects of NMs, such as oxidative stress, inflammation, necroptosis, pyroptosis, and ferroptosis, have been associated with autophagy and cooperate to regulate body activities. We therefore highlight that NM-mediated autophagy serves as a double-edged sword, which could be utilized in the treatment of certain diseases related to autophagy dysfunction, such as cancer, neurodegenerative disease, and cardiovascular disease. Challenges and suggestions for further investigations of NM-mediated autophagy are proposed with the purpose to improve their biosafety evaluation and facilitate their wide application. Databases such as PubMed and Web of Science were utilized to search for relevant literature, which included all published, Epub ahead of print, in-process, and non-indexed citations.

CONCLUSION

In this review, we focus on the dual effect of NM-mediated autophagy in the biomedical field. It has become a trend to use the benefits of NM-mediated autophagy to treat clinical diseases such as cancer and neurodegenerative diseases. Understanding the regulatory mechanism of NM-mediated autophagy in biomedicine is also helpful for reducing the toxic effects of NMs as much as possible.

Assessing the Photocatalytic Degradation of Fluoroquinolone Norfloxacin by Mn:ZnS Quantum Dots: Kinetic Study, Degradation Pathway and Influencing Factors

Norfloxacin (NOFX), a broadly used fluoroquinolone antibiotic, has been a subject of great concern in the past few years due to its undesirable effect on human beings and aquatic ecosystems. In this study, novel Mn doped ZnS (Mn:ZnS) quantum dots (QDs) were prepared through a facile chemical precipitation method and used as photocatalysts for NOFX degradation. Prior to photodegradation experiments, morphological and optical parameters of the QDs were examined through transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray analysis, Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, fluorescence spectroscopy, Brunauer-Emmett-Teller analysis, and differential thermal and thermogravimetric analyses. Mn:ZnS QDs exhibited excellent properties of photodegradation, not only under UV irradiation but also in sunlight, which induced NOFX to photodegrade. The utmost photodegradation efficiency was obtained under optimal conditions (25 mL of NOFX, 15 mg/L, pH 10, 60 min UV irradiation, 60 mgs QDs), adopting first order kinetics. In addition, hydroxyl radicals produced by the conduction band electrons were found to be the primary reason dominating the transformation of NOFX in basic conditions, while holes, oxygen atoms, as well as the doped metal (Mn) enhanced the degradation. The QDs showed excellent reusability and stability in four repeated cycles. Finally, four different pathways were predicted, derived from the identified intermediates, with piperazinyl ring transformation being the primary one. It is expected that the synthesized Mn:ZnS QDs could be utilized as efficient photocatalytic materials for energy conversion and ecological remediation.

Selective and sensitive determination of celastrol in traditional Chinese medicine based on molecularly imprinted polymers modified Mn-doped ZnS quantum dots optosensing materials

In this work, we proposed a facile strategy to prepare molecularly imprinted polymers (MIPs) modified Mn-doped ZnS quantum dots (QDs) as optosensing materials via sol-gel polymerization for specific recognition of celastrol (Cel) in traditional Chinese medicine (TCM). Firstly, L-Cysteine (L-Cys) modified Mn-doped ZnS QDs (L-Cys@Mn-ZnS) was used as imprinting substrate. The amino and carboxyl groups on the surface of Mn-ZnS QDs can provide more binding sites for imprinting polymerization. Then, the fluorescent MIPs was synthesized in the presence of L-Cys@Mn-ZnS QDs, template celastrol, 3-aminopropyl triethoxysilane (APTES) and ammonium hydroxide in the ethanol-water (9/1, v/v) solution. The morphology and structure of the products were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometer (XRD) and X-ray photoelectron spectroscopy (XPS). The resulting MIPs functionalized Mn-doped ZnS QDs (denoted as MIPs@L-Cys@Mn-ZnS QDs) had higher imprinting factor of 14.19 and significant selectivity. The MIPs@L-Cys@Mn-ZnS QDs as fluorescent probe exhibited sensitive response to Cel in the linear range from 0.1 μM to 3.5 μM and the limit of detection was estimated to be 35.2 nM. The probe was also applied for the detection of Cel in traditional Chinese medicine with recovery ranged from 88.0%-105.0%. The results confirmed that MIPs@L-Cys@Mn-ZnS QDs could efficiently and specifically capture Cel from actual complex traditional Chinese medicine samples.

Gold nanoparticles enumeration with dark-field optical microscope for the sensitive glycoprotein sandwich assay

Protein glycosylation is an important post-translational modification and glycoproteins are associated with many crucial metabolic progresses of life. In order to detect glycoproteins sensitively, we propose a gold nanoparticles (GNPs) enumeration method based on boronate affinity sandwich system, which is constructed between the boronic acid polymer functionalized magnetic nanoparticles (Fe₃O₄@MPS@VPBA NPs) and 4-mercaptophenylboronic acid modified GNPs (GNPs-MPBA) by the targeted glycoproteins as the linker. Therefore, the sandwich complex is formed, resulting in the decrease of GNPs-MPBA counts in the solution. Based on the dark-field microscope (DFM) imaging technique, the sensitive GNPs enumeration assay is developed for glycoproteins quantitation. Immunoglobulin (IgG), as one of the important glycoproteins, is introduced to evaluate the proposed method. A low detection limit of 1.22 ng mL^-1 for IgG analysis is obtained. The result indicates that the proposed GNPs enumeration method offers a simple, effective, label-free and highly sensitive strategy without signal amplification. It also possesses great potential for various target molecules determination at the single-particle level in the future.

Boronate affinity material-based sensors for recognition and detection of glycoproteins

This review comprehensively presents the current overview and development potential of BAMs-based sensors for glycoprotein recognition and detection.

Construction and Evaluation of a Self-Calibrating Multiresponse and Multifunctional Graphene Biosensor

Recently, many studies have been focused on the development of graphene-based biosensors. However, they rely on one type of signal and need to be calibrated by other techniques. In this study, a nonenzymatic graphene-based biosensor has been designed and constructed. Its ability to detect glucose and Escherichia coli by three different types of signals has been investigated. For its preparation, dopamine-functionalized polyethylene glycol and 2,5-thiophenediylbisboronic acid were conjugated onto the surface of graphene sheets by nitrene [2 + 1] cycloaddition and condensation reactions, respectively. Multivalent interactions between boronic acid segments and biosystems consequently increased the quantifiable fluorescence emission and UV absorption of dopamine segments. Additionally, changing the electrochemical behavior of the functionalized graphene sheets was possible and resulted in a measurable output signal. Conjugation of mannose onto the surface of the biosensor improved its magnitude of signals and specificity for sensing E. coli in a complex medium. The efficiency and accuracy of each signal was monitored by others, which resulted in a real-time self-calibrating biosensor. Taking advantage of the versatility of the three different indicators, including florescence, UV, and electrochemistry, the functionalized graphene sheets have been used as self-regulating biosensors to detect a variety of biosystems with a high accuracy and specificity in a short time.

Toxicity and serum metabolomics investigation of Mn-doped ZnS quantum dots in mice

Purpose

Mn-doped ZnS quantum dots (QDs) with special luminescent properties have been widely researched and applied in various fields. Thus, their release toxicity and security cannot be ignored.

Methods

In the present study, the toxicity and non-targeted metabolomics of Mn-doped ZnS QDs were investigated after single intravenous injection. Serum metabolites were evaluated based on gas chromatography–mass spectrometry together with multivariate statistical analyses [principal component analysis, partial least squares discriminant analysis, and orthogonal PLS-DA].

Results

The modified metabolites (variable importance in the projection (VIP) >1 and p<0.05) revealed that Mn-doped ZnS QDs exposure disturbed glycolysis, tricarboxylic acid cycle, ketoplasia, glutaminolysis, and amino acid and lipid metabolism. The behavior, coefficients of organs, and histological changes were the same as in the control group, and the disturbance of hematology and serum biochemistry was not dose- or time-dependent.

Conclusion

Our study provides a general observation regarding the toxicity and potential metabolic responses of mice exposed to Mn-doped ZnS QDs.

Molecularly imprinted polymeric shell coated monodisperse-porous silica microspheres as a stationary phase for microfluidic boronate affinity chromatography

Molecular imprinting of cis-diol functionalized agents via boronate affinity interaction has been usually performed using nanoparticles as a support which cannot be utilized as a stationary phase in continuous microcolumn applications. In this study, monodisperse-porous, spherical silica particles in the micron-size range, with bimodal pore diameter distribution were selected as a new support for the synthesis of a molecularly imprinted boronate affinity sorbent, using a cis-diol functionalized agent as the template. A specific surface area of 158 m² /g was achieved with the imprinted sorbent by using monodisperse-porous silica microspheres containing both mesoporous and macroporous compartments as the support. High porosity originating from the macroporous compartment and sufficiently high particle size provided good column permeability to the imprinted sorbent in microcolumn applications. The mesoporous compartment provided a large surface area for the parking of imprinted molecules while the macroporous compartment facilitated the intraparticular diffusion of imprinted target within the microsphere interior. A microfluidic boronate affinity system was first constructed by using molecularly imprinted polymeric shell coated monodisperse-porous silica microspheres as a stationary phase. The synthetic route for the imprinting process, the reversible adsorption/ desorption behavior of selected target and the selectivity of imprinted sorbent in both batch and microfluidic boronate affinity chromatography systems are reported.

A biomimetic fluorescent nanosensor based on imprinted polymers modified with carbon dots for sensitive detection of alpha-fetoprotein in clinical samples

A biomimetic fluorescent nanosensor based on molecularly imprinted polymers modified with carbon dots (CDs@MIPs) has been prepared for rapid, selective and sensitive detection of alpha-fetoprotein (AFP) in clinical samples.

Novel π-extended hybrid xanthene dyes with two spirolactone rings for optoelectronic and biological applications

Two hybrid xanthene dyes that can operate as half-subtractors in methanol and can target mitochondria have been developed.