Advances in sensing and biosensing of bisphenols: A review

Fabrication of well-aligned Co-MOF arrays through a controlled and moderate process for the development of a flexible tetrabromobisphenol A sensor

Tetrabromobisphenol A (TBBPA) has attracted a great deal of attention due to its side effects and potential bioaccumulation properties. It is of great importance to construct and develop novel electrochemical sensors for the sensitive and selective detection of TBBPA. In the present study, cobalt (Co) based metal-organic frameworks (MOFs) were synthesized on carbon cloth (CC) by using cobalt nitrate hexahydrate and 2-methylimidazole. The morphological characterization was carried out by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). The results showed that Co-MOFs/CC have a leaf-like structure and abundant surface functional groups. The electrochemical properties of the sensor were investigated by differential pulse voltammetry (DPV). The effects of different ratios of metal ions to organic ligands, reaction temperature, time, concentration, pH value of the electrolyte, and incubation time on the oxidation peak current of TBBPA were studied. Under the optimal conditions, the linear range of the designed sensor was 0.1 μM-100 μM, and the limit of detection was 40 nM. The proposed sensor is simple, of low cost and efficient, which can greatly facilitate the detection tasks of environmental monitoring workers.

A Novel Magnetic β-Cyclodextrin-Modified Graphene Oxide and Chitosan Composite as an Adsorbent for Trace Extraction of Four Bisphenol Pollutants from Environmental Water Samples and Food Samples

In this study, a novel functionalized magnetic composite (MNCGC) for magnetic solid-phase extraction of bisphenols from environmental and food samples was developed, featuring a multistep synthesis with Fe3O4, chitosan, graphene oxide, and β-cyclodextrin, crosslinked by glutaraldehyde. Characterization confirmed its advantageous morphology, intact crystal structure of the magnetic core, specific surface area, and magnetization, enabling efficient adsorption and separation via an external magnetic field. The optimized MSPE-HPLC-FLD method demonstrated excellent sensitivity, linearity, and recovery rates exceeding 80% for bisphenol pollutants, validating the method's effectiveness in enriching and detecting trace levels of bisphenols in complex matrices. This approach offers a new avenue for analyzing multiple bisphenol residues, with successful application to environmental water and food samples, showing high recovery rates.

One-step preparation of carboxyl-functionalized porous organic polymer as sorbent for enrichment of phenols in bottled water, juice and honey samples

Herein, a novel carboxyl-functionalized porous organic polymer (COOH-POP) was prepared as sorbent. Due to multiple hydrogen bonds and π-π interactions between COOH-POP and phenols, COOH-POP shows good enrichment ability and very fast adsorption rate for phenols. Then, an analytical method was developed for determination of five phenols (2-chlorophenol, bisphenol A, 2,6-dichlorophenol, 2,4-dichlorophenol and p-tert-butylphenol) in bottled water, lemon juice, peach juice and honey samples using COOH-POP as solid phase extraction sorbent in combination with high performance liquid chromatography. Under optimal conditions, the COOH-POP based method gave the detection limits (S/N = 3) of 0.02-0.10 ng mL-1 for bottled water, 0.03-0.12 ng mL-1 for lemon juice, 0.03-0.25 ng mL-1 for peach juice and 0.7-1.5 ng g-1 for honey samples. The recoveries for spiked samples ranged from 84.0 % to 119.0 % with relative standard deviation less than 7.6 %. This study provides a new yet effective method for enrichment of phenols by designing carboxyl-functionalized porous organic polymer as sorbent.

Graphene and gold nanoparticle-based bionanocomposite for the voltammetric determination of bisphenol A in (micro)plastics

The monitoring of endocrine disruptors in the environment is one of the main strategies in the investigation of potential risks associated with exposure to these chemicals. Bisphenol A is one of the most prevalent endocrine-disrupting compounds and is prone to leaching out from polycarbonate plastic in both freshwater and marine environments. Additionally, microplastics also can leach out bisphenol A during their fragmentation in the water environment. In the quest for a highly sensitive sensor to determine bisphenol A in different matrices, an innovative bionanocomposite material has been achieved. This material is composed of gold nanoparticles and graphene, and was synthesized using a green approach that utilized guava (Psidium guajava) extract for reduction, stabilization, and dispersion purposes. Transmission electron microscopy images revealed well-spread gold nanoparticles with an average diameter of 31 nm on laminated graphene sheets in the composite material. An electrochemical sensor was developed by depositing the bionanocomposite onto a glassy carbon surface, which displayed remarkable responsiveness towards bisphenol A. Experimental conditions such as the amount of graphene, extract: water ratio of bionanocomposite and pH of the supporting electrolyte were optimized to improve the electrochemical performance. The modified electrode displayed a marked improvement in current responses for the oxidation of bisphenol A as compared to the uncovered glassy carbon electrode. A calibration plot was established for bisphenol A in 0.1 mol L^-1 Britton-Robinson buffer (pH 4.0), and the detection limit was determined to equal to 15.0 nmol L^-1. Recovery data from 92 to 109% were obtained in (micro)plastics samples using the electrochemical sensor and were compared with UV-vis spectrometry, demonstrating its successful application with accurate responses.

Electrochemical sensor based on epoxy-functionalized BEA nanozeolite and graphene oxide modified glassy carbon electrode for bisphenol E determination

An epoxy-functionalized beta type nanozeolite (BEA)/graphene oxide nanocomposite modified glassy carbon electrode (GCE/BEA/APTMS/GA/GO/NF) has been created for the differential pulse voltammetric determination of bisphenol E (BPE). The modified electrode presented an enhanced current response in comparison with bare GCE. A linear dependence of anodic peak current (Ip) and scan rate (ν) was observed, which showed that the electrochemical process was adsorption-controlled. Differential pulse voltammetry (DPV) was employed and optimized for the sensitive determination of BPE. Under the optimized conditions, the anodic peak current was linearly proportional to BPE concentration in the range between 0.07 and 4.81 µM, with a correlation coefficient of 0.995 and limit of detection 0.056 μM (S/N = 3). The electrode showed good repeatability and storage stability, and a low response to interfering compounds. Comparison was made to the determination of bisphenol A. To confirm the electrode analytical performance, recovery tests were performed, and deviations lower than 10% were found. The BEA zeolite-GO nanocomposite proved to be a promising sensing platform for bisphenol determination.

Graphical abstract

Effective Extraction of Bisphenol Compounds from Milk with Stable Zr(IV)-Based Metal-Organic Framework Particles

Bisphenol compounds (BPs) have recently been the subject of growing interest due to their wide use in industrial and consumer products. Besides their adverse effects on human endocrine system, effective extraction of BPs and their elimination from complex sample matrix are still significant challenges in food analysis. Herein, a novel Zr(IV)-based metal-organic framework (MOF), named BUT-16, has been synthesized and utilized for the extraction and enrichment of BPs in milk samples. Bisphenol A (BPA), one of the highest production volume BPs, is used as a model molecule. The uptake capacity for BPA can reach up to 48 mg/g, and the adsorption rate is rapid (∼10 min), because of the larger surface area and cooperation of multiple functionalities of BUT-16. Employing BUT-16 in solid-phase extraction, coupled with ultra-performance liquid chromatography-tandem mass spectrometry detection, we generated a rapid, facile, and robust method for the enrichment and detection of trace BPA and its 12 substitutes in milk samples. After optimization, the limits of detection and quantification for BPs can be achieved as low as 0.05 and 0.2 ng/mL, respectively. Without the correction of the isotopic internal standard, the average recoveries of BPs at the different spiked concentrations varied from 63.8 to 120.6%, with a satisfactory precision (RSD ≤ 8.2%). Furthermore, the proposed method was successfully applied to the detection of BPs in real milk samples, and the results were in accordance with those of methods reported previously.

Embedded racetrack microring resonator sensor based on GeSbSe glasses

In this article, a compact racetrack double microring resonator (MRR) sensor based on Ge₂₈Sb₁₂Se₆₀ (GeSbSe) is investigated. The sensor device consists of a racetrack microring, an embedded small microring, and a strip waveguide. Electron beam lithography (EBL) and dry etching are used to fabricate the device. The compact racetrack double MRR device are obtained with Q-factor equal to 7.17 × 10⁴ and FSR of 24 nm by measuring the transmission spectrum. By measuring different concentrations of glucose solutions, a sensitivity of 297 nm/RIU by linear fitting and an intrinsic limit of detection (iLOD) of 7.40 × 10^-5 are obtained. It paves the way for the application of chalcogenide glasses in the field of biosensing.

The Characterization of Binding between Aptamer and Bisphenol A and Developing Electrochemical Aptasensors for Bisphenol A with Rationally Engineered Aptamers

Bisphenol A (BPA) is widely used in the manufacture of polycarbonate and epoxy-resin-based products, and BPA contamination often happens in a variety of types of environment and food stuffs. BPA can cause many harmful effects to health due to its high toxicity. The rapid detection of BPA is of great significance in environmental monitoring and food safety. Nucleic acid aptamers show advantages in biosensors due to good chemical stability, the ease of labeling functional groups, and target binding that induces conformation change. Here, we performed a thorough characterization of the binding performance of one 60-nt anti-BPA DNA aptamer with isothermal titration calorimetry (ITC). We found the crucial region of the aptamer sequence for affinity binding with BPA, and the aptamer was able to be truncated to 29-nt DNA without losing affinity. We then developed a simple reagent-less electrochemical aptamer-based sensor for rapid BPA detection with this engineered aptamer. The truncated aptamer with a redox tag methylene blue (MB) was immobilized on a gold electrode. BPA-binding induced the conformation change of the MB-labeled aptamer, moving the MB close to the electrode surface and causing a significant current increase in MB in square wave voltammetry (SWV). Under optimized conditions, we achieved the quantitative detection of BPA with a detection limit of BPA at 0.1 μM. This sensor showed quick response to BPA and could be regenerated by washing with deionized water. This sensor was selective, and it allowed detecting BPA in complex samples, showing its potential in practice. This study will help in further applications of the aptamers of BPA.

An Overview of Aptamer-Based Sensor Platforms for the Detection of Bisphenol-A

Endocrine disruptive compounds are natural or anthropogenic environmental micropollutants that alter the function of the endocrine system ultimately damaging the metabolism. Bisphenol A (BPA) is the most common of these pollutants and it is often used in epoxy coatings and polycarbonates as a plasticizer. Therefore, monitoring BPA levels in different environments is very important and challenging. In recent years, an increasing number of BPA detection methods have been proposed. This article presents a critical review of aptamer-based electrochemical, fluorescence-based, colorimetric, and several other BPA detection platforms published in the last decade. Furthermore, a statistical evaluation has been made using principle component analysis showing analytical performance parameters do not create very different clusters. Comparisons to other BPA detection methods are also presented so that the reader has an overall literature overview.

Carbon nanostructures: a comprehensive review of potential applications and toxic effects

There is no doubt that nanotechnology has revolutionized our life since the 1970s when it was first introduced. Nanomaterials have helped us to improve the current products and services we use. Among the different types of nanomaterials, the application of carbon-based nanomaterials in every aspect of our lives has rapidly grown over recent decades. This review discusses recent advances of those applications in distinct categories, including medical, industrial, and environmental applications. The first main section introduces nanomaterials, especially carbon-based nanomaterials. In the first section, we discussed medical applications, including medical biosensors, drug and gene delivery, cell and tissue labeling and imaging, tissue engineering, and the fight against bacterial and fungal infections. The next section discusses industrial applications, including agriculture, plastic, electronic, energy, and food industries. In addition, the environmental applications, including detection of air and water pollutions and removal of environmental pollutants, were vastly reviewed in the last section. In the conclusion section, we discussed challenges and future perspectives.

A Status Update on the Development of Polymer and Metal-Based Graphene Electrochemical Sensors for Detection and Quantitation of Bisphenol A

The detection and quantitation of bisphenol A (BPA) in the environment and food products has been a subject of considerable interest. BPA, a diphenylmethane derivative is a well-known industrial raw material with wide range of applications. It is a well-known endocrine disruptor and acts as an estrogen mimic. BPA is an environmental health concern and its accumulation in hydro-geological cycles is a matter of serious ecological peril. This review basically assesses various chemically modified electrodes composed of diverse components that have been employed to recognize BPA in different matrices. Electrochemical sensors prepared using graphene materials in combination with metals and polymers for selective detection of BPA have been discussed extensively. The emphasis is on detection of BPA in various samples encountered in routine use such as plastic bottles, receipts, baby feed bottles, milk samples, mineralized water, tissue paper, DVDs, and others. Although research in this field is in the exploratory stage, deeper insights into fundamental studies of sensing systems, fast analysis of real samples and validation of sensors are some of the factors that need major impetus. It is expected that chemically modified electrode-based sensing systems will soon take over as a viable option for monitoring diverse pollutants.

A label-free photoelectrochemical sensor of S, N co-doped graphene quantum dot (S, N-GQD)-modified electrode for ultrasensitive detection of bisphenol A

S, N co-doped graphene quantum dot (S, N-GQD) materials have been composited via a one-pot pattern and used as photosensitive materials to construct a label-free photoelectrochemical (PEC) sensor. The PEC experiments show an enhanced photocurrent response toward Bisphenol A (BPA) sensing due to the increased charge transfer rate and the enhanced absorption of visible light. Compared with dark conditions, the photocurrent signal (- 0.2 V vs. SCE) is greatly increased because of the effective oxidation of BPA by photogenerated holes and the rapid electron transfer of S, N-GQDs on the PEC sensing platform. Under optimal conditions linear current response to BPA is in two ranges of 0.12-5 µM and 5-40 µM. The limit of detection is 0.04 µM (S/N = 3). The designed sensor has enduring stability and admirable interference immunity. It  provides an alternative approach for BPA determination in real samples with recoveries of 99.3-103% and  RSD of 2.0-4.1%.

Plastic Waste Management in India: Challenges, Opportunities, and Roadmap for Circular Economy

Plastic waste (PW) is one of the most rapid-growing waste streams in municipal solid waste all over the world. India has become a global player in the plastic value chain. Despite low consumption, domestic generation and imports create a significant burden on the overall waste management system, which requires in-depth understanding of the scenario and pathways that can mitigate the crisis. Although Indian researchers have widely researched technology-related issues in academic papers, a substantial knowledge gap exists in understanding the problem’s depth and possible solutions. This review article focuses on current plastic production, consumption, and waste generation in India. This review article mainly analyzes data and information regarding Indian PW management and highlights some critical issues such as reverse supply chain, effective PW management, source-specific recovery, and PW rules in India. Comprehensively, this review will help to identify implementable strategies for policymakers and research opportunities for future researchers in holistic PW management and recycling in India, focusing on the circular economy and sustainable development goals.

Perna canaliculus as an Ecological Material in the Removal of o-Cresol Pollutants from Soil

Soil contamination with cresol is a problem of the 21st century and poses a threat to soil microorganisms, humans, animals, and plants. The lack of precise data on the potential toxicity of o-cresol in soil microbiome and biochemical activity, as well as the search for effective remediation methods, inspired the aim of this study. Soil is subjected to four levels of contamination with o-cresol: 0, 0.1, 1, 10, and 50 mg o-cresol kg-1 dry matter (DM) of soil and the following are determined: the count of eight groups of microorganisms, colony development index (CD) and ecophysiological diversity index (EP) for organotrophic bacteria, actinobacteria and fungi, and the bacterial genetic diversity. Moreover, the responses of seven soil enzymes are investigated. Perna canaliculus is a recognized biosorbent of organic pollutants. Therefore, microbial biostimulation with Perna canaliculus shells is used to eliminate the negative effect of the phenolic compound on the soil microbiome. Fungi appears to be the microorganisms most sensitive to o-cresol, while Pseudomonas sp. is the least sensitive. In o-cresol-contaminated soils, the microbiome is represented mainly by the bacteria of the Proteobacteria and Firmicutes phyla. Acid phosphatase, alkaline phosphatase and urease can be regarded as sensitive indicators of soil disturbance. Perna canaliculus shells prove to be an effective biostimulator of soil under pressure with o-cresol.

Molecularly Imprinted Polymers (MIPs) in Sensors for Environmental and Biomedical Applications: A Review

Molecular imprinted polymers are custom made materials with specific recognition sites for a target molecule. Their specificity and the variety of materials and physical shapes in which they can be fabricated make them ideal components for sensing platforms. Despite their excellent properties, MIP-based sensors have rarely left the academic laboratory environment. This work presents a comprehensive review of recent reports in the environmental and biomedical fields, with a focus on electrochemical and optical signaling mechanisms. The discussion aims to identify knowledge gaps that hinder the translation of MIP-based technology from research laboratories to commercialization.

Highly sensitive and selective detection of naproxen via molecularly imprinted carbon dots as a fluorescent sensor

The overuse and inappropriate discharge of naproxen, a common anti-inflammatory medication and an emerging contaminant in water, is detrimental to human health and bodies of water. Here, we design a fluorescent sensor based on molecularly imprinted carbon dots (CDs) for highly selective detection of trace amounts of naproxen. The CDs were encapsulated into the pores of silica through a sol–gel based method and provide fluorescent signal. After removal of the template molecules, a molecularly imprinted polymer layer was formed and the fluorescence of the CDs sensor was selectively quenched by naproxen. A detection limit of as low as 0.03 μM and a linear range of 0.05–4 μM for detecting naproxen in aqueous solution were obtained. High recoveries of naproxen levels in waste water and urine samples for practical application were also achieved. In addition, the accurate detection performance of sensor was maintained during the UV degradation of naproxen.

A highly selective fluorescent sensor for naproxen utilizes carbon dots as the fluorophore and molecularly imprinted polymer to provide the recognition sites. The fluorescence of carbon dots can be selectively quenched by naproxen.

Molecularly Imprinted Polymers Combined with Electrochemical Sensors for Food Contaminants Analysis

Detection of relevant contaminants using screening approaches is a key issue to ensure food safety and respect for the regulatory limits established. Electrochemical sensors present several advantages such as rapidity; ease of use; possibility of on-site analysis and low cost. The lack of selectivity for electrochemical sensors working in complex samples as food may be overcome by coupling them with molecularly imprinted polymers (MIPs). MIPs are synthetic materials that mimic biological receptors and are produced by the polymerization of functional monomers in presence of a target analyte. This paper critically reviews and discusses the recent progress in MIP-based electrochemical sensors for food safety. A brief introduction on MIPs and electrochemical sensors is given; followed by a discussion of the recent achievements for various MIPs-based electrochemical sensors for food contaminants analysis. Both electropolymerization and chemical synthesis of MIP-based electrochemical sensing are discussed as well as the relevant applications of MIPs used in sample preparation and then coupled to electrochemical analysis. Future perspectives and challenges have been eventually given.

The occurrence of bisphenol compounds in animal feed plastic packaging and migration into feed

Animal-derived food plays an important role in human exposure to bisphenol compounds (BPs), potentially as a result of the presence of BPs in animal feed. Even so, there have been few studies regarding the source of BPs in animal feed. The objective of the present study was to assess both the occurrence of BPs in animal feed packaging and the migration of BPs from feed packaging into animal feed. Thirteen BPs were monitored in 30 used animal feed plastic packaging samples previously employed for different animal feedstuffs and made of polypropylene (PP) or polyethylene (PE). Six and two BPs were found in PP-based woven bags and PE-based films, respectively. Bisphenol A (BPA) was the predominant analogue with a wide range of concentrations in both the PP- and PE-based packaging. A migration experiment was performed and provided the first-ever confirmation that BPA is able to migrate from plastic packaging into solid feed. Both contact time and the initial BP concentration affected the extent of migration. These results expand our knowledge regarding the origin of BPs in the food chain and suggest that further study of the bioaccumulation of BPs in animals is warranted.

Electrochemical Detection of Bisphenol A by Tyrosinase Immobilized on Electrospun Nanofibers Decorated with Gold Nanoparticles

Bisphenol A (BPA) is an endocrine-disrupting chemical (EDC) employed in industrial processes that causes adverse effects on the environment and human health. Sensitive and inexpensive methods to detect BPA are therefore needed. In this paper, we describe an electrochemical biosensor for detecting low levels of BPA using polymeric electrospun nanofibers of polyamide 6 (PA6) and poly(allylamine hydrochloride) (PAH) decorated with gold nanoparticles (AuNPs), namely, PA6/PAH@AuNPs, which were deposited onto a fluorine-doped tin oxide (FTO) substrate. The hybrid layer was excellent for the immobilization of tyrosinase (Tyr), which allowed an amperometric detection of BPA with a limit of detection of 0.011 μM in the concentration range from 0.05 to 20 μM. Detection was also possible in real water samples with recoveries in the range of 92–105%. The improved sensing performance is attributed to the combined effect of the large surface area and porosity of PA6/PAH nanofibers, the catalytic activity of AuNPs, and oxidoreductase ability of Tyr. These results provide a route for novel biosensing architectures to monitor BPA and other EDCs in water resources.

Latest Advances in Determination of Bisphenols with Nanomaterials, Molecularly Imprinted Polymers and Aptamer Based Electrochemical Sensors

Contamination of environmental sources such as soils, sediments and rivers and human exposure caused by several endocrine disrupting compounds (EDCs) are considered as the most challenging issues of today's world. EDCs cover a wide variety of compounds ranging from phthalates to parabens and bisphenols (BPs) are the leading group among them. BPs are widely used during the production of different plastic materials such as food and beverage containers, toys, medical equipment and baby bottles that we use in every aspect of our lives. BPs may migrate from those products to different media under certain conditions and this situation causes chronic exposure for humans and other creatures in the environment. Especially bisphenol A (BPA) and its other analogues such as bisphenol F, bisphenol S and tetrabromobisphenol that have similar structures and are preferred as alternatives to BPA cause harmful adverse effects such as endocrine disruption, neurotoxicity, genotoxicity and cytotoxicity. There are legal restrictions and prohibitions by the European Union (EU) in order to prevent possible harmful effects. Therefore, it is important to develop highly sensitive, fast, easy to use and cheap sensors for the determination of BPs in biological, environmental and commercial samples. Electrochemical sensors, which are one of the most widely, used analytical techniques, provide these conditions. Additionally, it is possible to enhance the performance of electrochemical sensors with nanomaterials, molecularly imprinted polymers or aptamer based technologies. This review aims to give comprehensive information about BPs with summarizing most recent applications of electrochemical sensors for their determination in different samples.

Electrochemical detection of bisphenols in food: A review

Bisphenols (BPs) are worldwide used organic compounds in plastics, belonging to the group of endocrine disrupting chemicals (EDCs) which exhibits endocrine disruption to beings. Migration of BPs from food contact materials like plastic containers, epoxy coatings in metal cans and thermal papers, would results in bioaccumulation of BPs in human beings, causing adverse health effects. Therefore, sensitive and selective determination of BPs in food is needed. Among different strategies have been explored for the detection of BPs, electrochemical sensors with relatively high sensitivity and fast response are promising. This paper is devoted to comprehensively review the developed electrochemical methods for BPs sensing in food, so that to find a direction for developing low cost, high accuracy and compatibility sensors toward the sensitive and selective detection of BPs. Different electrochemical technologies categorized by recognition agents, aptamers, enzymes, molecularly imprinted polymers and nanomaterials are discussed and summarized in their mechanisms, usages, merits and limitations. The challenges and further perspectives in the development of electrochemical sensors is also discussed.

Surfactant assisted Cr-metal organic framework for the detection of bisphenol A in dust from E-waste recycling area

Due to their highly porous structures, metal organic framework materials are widely used in analytic areas. In this paper, Cr-metal organic framework (MIL-101(Cr)) modified electrode was prepared and then was used as electrochemical sensor for the detection of bisphenol A (BPA). By using one kind of surfactant of cetyltrimethylammonium bromide (CTAB), the analytic performances of MIL-101 (Cr) towards BPA detection were greatly improved. Compared with pure MIL-101 (Cr), the differential pulse voltammetry (DPV) behavior of CTAB/MIL-101 (Cr) was improved 3.0 times in the presence of BPA. The hydrophobic long chain alkanes of CTAB can improve the enrichment and electrochemical oxidation for BPA. The CTAB/MIL-101 (Cr) sensor exhibited a linear range from 20 to 350 nM and a low detection limit of 9.95 nM (LOD = 3s_b/S) and showed good reproducibility, stability and selectivity. Finally, real samples of dusts from E-waste recycling area in South China were collected and the CTAB/MIL-101 (Cr) sensor demonstrated satisfactory results for BPA detection from these dust samples.

Advancements of chiral molecularly imprinted polymers in separation and sensor fields: A review of the last decade

Since chiral recognition mechanism based on molecularly imprinted polymers immerged, it has assisted countless chemical and electrochemical analytical sample preparation techniques. It has done this by enhancing the enatioseparation abilities of these techniques. The preparation and optimization of chiral molecularly imprinted polymers (CMIPs) are two favored methods in the separation and sensor fields. This review aims to present an overview of advances in the preparation and application of CMIPs in analytical approaches in different available formats (eg. column, monolithic column, cartridge, membrane, nanomaterials, pipette tip and stir bar sorptive) over the last decade. In addition, progress in the preparation and development of CMIPs-based sensor fields have been also discussed. Finally, the main application challenges of CMIPs are also summarily explained, as well as upcoming prospects in the field.

Application of chiral chromatography in radiopharmaceutical fields: A review

Chiral column chromatography (CCC) is a revolutionary analytical methodology for the enantioseparation of novel positron emission tomography (PET) tracers in the primary stages of drug development. Due to the different behaviors of tracer enantiomers (e.g. toxicity, metabolism and side effects) in administrated subjects, their separation and purification is a challenging endeavor. Over the last three decades, different commercial chiral columns have been applied for the enantioseparation of PET-radioligand (PET-RL) or radiotracers (PET-RT), using high-performance liquid chromatography (HPLC). The categorization and reviewing of them is a vital topic. This review presents a brief overview of advances, applications, and future prospectives of CCC in radiopharmaceutical approaches. In addition, the effective chromatographic parameters and degravitation trends to enhance enantioseparation resolution are addressed. Moreover, the application and potential of chiral super fluidical chromatography (CSFC) as an alternative for enantioseparation in the field of radiopharmaceutical is discussed. Finally, the crucial application challenges of CCC are explained and imminent tasks are suggested.

Poly(sulfosalicylic acid)-functionalized gold nanoparticles for the detection of tetrabromobisphenol A at pM concentrations

Developing a sensitive, simple and fast sensing system for 3,3',5,5'-tetrabromobisphenol A (TBBPA) is important because of its ubiquitousness and high toxicity. In this work, a gold nanoparticles (AuNPs) and poly(sulfosalicylic acid) (PSSA) composite film (AuNPs-PSSA) is fabricated in-situ on an electrode surface via cyclic voltammetry scanning. The characterization via scanning electron microscopy (SEM), atomic force microscopy (AFM), energy dispersive X-ray (EDX) analysis and Fourier transform infrared (FTIR) spectroscopy indicate that the PSSA film is homogeneously decorated with AuNPs, and a highly uniform and thin composite film is obtained. Electrochemical tests reveal that the AuNPs-PSSA film exhibits larger active surface area, lower charge transfer resistance and higher accumulation efficiency toward TBBPA than single AuNPs and PSSA film. As a result, the oxidation signals and sensing sensitivity of TBBPA are significantly enhanced on the surface of the AuNPs-PSSA. The developed TBBPA sensing platform using AuNPs-PSSA composite film, with low detection limit (25 pM) and wide linear range (0.1-10 nM), is successfully utilized to measure TBBPA level in wastewater samples. The results are highly consistent with those that obtained from high-performance liquid chromatography. The preparation and reusability of the TBBPA sensor can be automatically achieved through CV scanning, providing a promising on-line monitoring system for wastewater samples.

Soil enzyme response to bisphenol F contamination in the soil bioaugmented using bacterial and mould fungal consortium

The concept of the study resulted from the lack of accurate data on the toxicity of bisphenol F (BPF) coinciding with the need for immediate changes in the global economic policy eliminating the effects of environmental contamination with bisphenol A (BPA). The aim of the experiment was to determine the scale of the previously unstudied inhibitory effect of BPF on soil biochemical activity. To this end, in a soil subjected to increasing BPF pressure at three contamination levels of 0, 5, 50 and 500 mg BPF kg^-1 DM, responses of soil enzymes, dehydrogenases, catalase, urease, acid phosphatase, alkaline phosphatase, arylsulphatase and β-glucosidase, were examined. Moreover, the study suggested a potentially effective way of biostimulating the soil by means of bioaugmentation with a consortium of four bacterial species: Pseudomonas umsongensis, Bacillus mycoides, Bacillus weihenstephanensis and Bacillus subtilis, and the following fungal species: Mucor circinelloides, Penicillium daleae, Penicillium chrysogenum and Aspergillus niger. It was found that BPF was a controversial BPA analogue due to the fact that it contributed to the inhibition of all the enzyme activities. Dehydrogenases proved to be the most sensitive to bisphenol contamination of the soil. The addition of 5 mg BPF kg^-1 DM of soil triggered an escalation of the inhibition comparable to that for the other enzymes only after exposing them to the effects of 50 and 500 mg BPF kg^-1 DM of soil. Moreover, BPF generated low activity of urease, acid phosphatase, alkaline phosphatase and β-glucosidase. Bacterial inoculum increased the activity of urease, β-glucosidase, catalase and alkaline phosphatase. Seventy-six percent of BPF underwent biodegradation during the 5 days of the study.

Molecularly imprinted polymer SPE sensor for analysis of CA-125 on serum

Considering the high incidence level and mortality rate of ovarian cancer, particularly among the European female population, the carbohydrate antigen 125 (CA-125) was selected as the protein target for this study for the development of a MIP-based biosensor. This work presents the development of molecular imprinting polymers (MIPs) on gold electrode surface for CA-125 biomarker recognition. The preparation of the CA-125 imprinting was obtained by electropolymerization of pyrrole (Py) monomer in a gold electrode using cyclic voltammetry (CV) in order to obtain highly selective materials with great molecular recognition capability. The quantification of CA-125 biomarker was made through the comparison of two methods: electrochemical (square wave voltammetry -SWV) and optical transduction (surface plasmon resonance -SPR). SWV has been widely used in biological molecules analysis since it is a fast and sensitive technique. In turn, SPR is a non-destructive optical technique that provides high-quality analytical data of CA-125 biomarker interactions with MIP. Several analytical parameters, such as sensitivity, linear response interval, and detection limit were determined to proceed to the performance evaluation of the electrochemical and optical transduction used in the development of the CA-125 biosensor. The biosensor based in the electrochemical transduction was the one that presented the best analytical parameters, yielding a good selectivity and a detection limit (LOD) of 0.01 U/mL, providing a linear concentration range between 0.01 and 500 U/mL. This electrochemical biosensor was selected for the study and it was successfully applied in the CA-125 analysis in artificial serum samples with recovery rates ranging from 91 to 105% with an average relative error of 5.8%.

Estrogen receptor-based multi-residue screening of bisphenol compounds in urine

Human exposure to bisphenol compounds (BPs) has been implicated in the development of several chronic diseases. Instead of exploiting the traditional methods for determination of BPs, this work confirms that the human estrogen receptor α ligand binding domain (hERα-LBD) is a powerful recognition element that can be used to monitor multi-residue of BPs in urine samples by fluorescence polarization (FP) assay. Test parameters were optimized for the best performance. Under the optimal conditions, the IC₅₀ values of BPs are in the range of 0.04-1.61 μg mL^-1 . Recovery experiments were then performed to assess the accuracy and precision of the established method. The results detected by FP assay show good agreements with that of liquid chromatography-tandem mass spectrometry method with a fit of R²  = 0.9372 and 0.9640 for BPE and BPAP, respectively. A computational methodology, ligand-based pharmacophore model, was also employed to further explore the broad-specific of tested compounds. It was found that the two hydrogen bond acceptor features and one hydrophobic aliphatic feature were essential for the corresponding cross-reactivity results from the FP assay. All these results suggest that the established method can be successfully applied to monitor the occurrence of BPs in urine.

Estrogen receptor-based fluorescence polarization assay for bisphenol analogues and molecular modeling study of their complexation mechanism

A fluorescence polarization (FP) assay based on estrogen receptor was developed for the determination of bisphenol compounds (BPs). The human estrogen receptor α ligand binding domain (hERα-LBD) and coumestrol were employed as recognition element and fluorescent probe, respectively. Competitive displacement of tracer from receptor suggested that BPs exhibited dose-dependent binding to hERα-LBD. In order to elucidate the structural basis for the interaction between BPs and hERα-LBD, molecular dynamics simulations were performed to explore their complexation mechanism. The docked bisphenol compounds adopted agonist/antagonist conformations with varying positions and orientations in the hydrophobic binding pocket, depending on their structural characteristics of bridging moieties. Interestingly, the calculated binding energies were generally correlated with the experimentally measured affinities, indicating a potential advantage of the molecular modeling approach in predicting the binding potencies of putative ligands. Considering that the real samples may contain more than one BP, the established FP assay can potentially be used as a pre-screening method to determine the total amounts of bisphenol compounds.

Metabolism Disrupting Chemicals and Alteration of Neuroendocrine Circuits Controlling Food Intake and Energy Metabolism

The metabolism-disrupting chemicals (MDCs) are molecules (largely belonging to the category of endocrine disrupting chemicals, EDCs) that can cause important diseases as the metabolic syndrome, obesity, Type 2 Diabetes Mellitus or fatty liver. MDCs act on fat tissue and liver, may regulate gut functions (influencing absorption), but they may also alter the hypothalamic peptidergic circuits that control food intake and energy metabolism. These circuits are normally regulated by several factors, including estrogens, therefore those EDCs that are able to bind estrogen receptors may promote metabolic changes through their action on the same hypothalamic circuits. Here, we discuss data showing how the exposure to some MDCs can alter the expression of neuropeptides within the hypothalamic circuits involved in food intake and energy metabolism. In particular, in this review we have described the effects at hypothalamic level of three known EDCs: Genistein, an isoflavone (phytoestrogen) abundant in soy-based food (a possible new not-synthetic MDC), Bisphenol A (compound involved in the manufacturing of many consumer plastic products), and Tributyltin chloride (one of the most dangerous and toxic endocrine disruptor, used in antifouling paint for boats).