A novel enzyme-free glucose and H2O2 sensor based on 3D graphene aerogels decorated with Ni3N nanoparticles

Voltammetric determination of hydrogen peroxide at decorated palladium nanoparticles/poly 1,5-diaminonaphthalene modified carbon-paste electrode

In this work, palladium nanoparticles (PdNPs)/p1,5-DAN/ carbon paste electrode (CPE) and p1,5-DAN/CPE sensors have been developed for determination of hydrogen peroxide. Both sensors showed a highly sensitive and selective electrochemical behaviour, which were derived from a large specific area of poly 1,5 DAN and super excellent electroconductibility of PdNPs. PdNPs/p1,5-DAN/CPE exhibited excellent performance over p1,5-DAN/CPE. Thus, it was used for detecting hydrogen peroxide (H2O2) with linear ranges of 0.1 to 250 µM and 0.2 to 300 µM as well as detection limits (S/N = 3) of 1.0 and 5.0 nM for square wave voltammetry (SWV) and cyclic voltammetry (C.V) techniques, respectively. The modified CPE has good reproducibility, adequate catalytic activity, simple synthesis and stability of peak response during H2O2 oxidation on long run that exceeds many probes. Both reproducibility and stability for H2O2 detection are attributable to the PdNPs immobilized on the surface of p1,5-DAN/CPE. The modified CPE was used for determining H2O2 in real specimens with good stability, sensitivity, and reproducibility.

Visual detection of H2O2 and glucose by HBcAb-HRP fluorescence-enhanced CdTe QDs/CDs ratiometric fluorescence sensing platform

This study presents the development of a sensitive and simple enhanced ratiometric fluorescence sensing platform in the consist of CdTe quantum dots (QDs), carbon dots (CDs), and hepatitis B core antibody labeled with horseradish peroxidase (HBcAb-HRP) for the visual analysis of H2O2 and glucose. The sulfur atoms in HBcAb-HRP have a strong affinity for Cd(II), which effectively enhances the fluorescence intensity of the CdTe QDs due to the generation of more radiative centers at the CdTe/Cd-SR complex. In the presence of H2O2, the Cd-S bonds are oxidized to form disulfide products and results in linear fluorescence quenching, while CDs maintain stable. Becasue glucose can be converted into H2O2 with the aid of glucose oxidase, this sensing platform can also be used for analyzing glucose. The detection limits for H2O2 and glucose are 2.9 μmol L-1 with RSD of 2.6% and 1.6 μmol L-1 with RSD of 2.4% respectively. In addition, under UV lamp irradiation, the orange-yellow CdTe QDs gradually quench with increasing H2O2 and glucose, while the blue CDs remain unchanged. A color change from orange-yellow to blue enables a visual semi-quantitative determination of H2O2 in commercial contact lens solution and glucose in human serum without any pretreatment. Thus, this CdTe QDs/CDs ratiometric sensing platform has significant potential for the rapid analysis of H2O2 and glucose in actual application.

Trends on Aerogel-Based Biosensors for Medical Applications: An Overview

Aerogels are unique solid-state materials composed of interconnected 3D solid networks and a large number of air-filled pores. This structure leads to extended structural characteristics as well as physicochemical properties of the nanoscale building blocks to macroscale, and integrated typical features of aerogels, such as high porosity, large surface area, and low density, with specific properties of the various constituents. Due to their combination of excellent properties, aerogels attract much interest in various applications, ranging from medicine to construction. In recent decades, their potential was exploited in many aerogels' materials, either organic, inorganic or hybrid. Considerable research efforts in recent years have been devoted to the development of aerogel-based biosensors and encouraging accomplishments have been achieved. In this work, recent (2018-2023) and ground-breaking advances in the preparation, classification, and physicochemical properties of aerogels and their sensing applications are presented. Different types of biosensors in which aerogels play a fundamental role are being explored and are collected in this manuscript. Moreover, the current challenges and some perspectives for the development of high-performance aerogel-based biosensors are summarized.

Enhancing electrochemical sensing through the use of functionalized graphene composites as nanozymes

Graphene-based nanozymes possess inherent nanomaterial properties that offer not only a simple substitute for enzymes but also a versatile platform capable of bonding with complex biochemical environments. The current review discusses the replacement of enzymes in developing biosensors with nanozymes. Functionalization of graphene-based materials with various nanoparticles can enhance their nanozymatic properties. Graphene oxide functionalization has been shown to yield graphene-based nanozymes that closely mimic several natural enzymes. This review provides an overview of the classification, current state-of-the-art development, synthesis routes, and types of functionalized graphene-based nanozymes for the design of electrochemical sensors. Furthermore, it includes a summary of the application of functionalized graphene-based nanozymes for constructing electrochemical sensors for pollutants, drugs, and various water and food samples. Challenges related to nanozymes as electrocatalytic materials are discussed, along with potential solutions and approaches for addressing these shortcomings.

The Roadmap of Graphene-Based Sensors: Electrochemical Methods for Bioanalytical Applications

Graphene (GR) has engrossed immense research attention as an emerging carbon material owing to its enthralling electrochemical (EC) and physical properties. Herein, we debate the role of GR-based nanomaterials (NMs) in refining EC sensing performance toward bioanalytes detection. Following the introduction, we briefly discuss the GR fabrication, properties, application as electrode materials, the principle of EC sensing system, and the importance of bioanalytes detection in early disease diagnosis. Along with the brief description of GR-derivatives, simulation, and doping, classification of GR-based EC sensors such as cancer biomarkers, neurotransmitters, DNA sensors, immunosensors, and various other bioanalytes detection is provided. The working mechanism of topical GR-based EC sensors, advantages, and real-time analysis of these along with details of analytical merit of figures for EC sensors are discussed. Last, we have concluded the review by providing some suggestions to overcome the existing downsides of GR-based sensors and future outlook. The advancement of electrochemistry, nanotechnology, and point-of-care (POC) devices could offer the next generation of precise, sensitive, and reliable EC sensors.

Tea-polyphenol green fabricating catkin-like CuAg for electrochemical H2O2 detection

Green fabrication of unique structural nanoparticles has always been of increasing interest in many fields. Herein, a facile and green strategy of fabricating catkin-like CuAg nanocomposites using tea-polyphenols as reduction agent is reported. As-prepared nanocomposites have been characterized by a series of analysis. Physical characterizations show the synthesised of nanocomposites whose catkin-like special morphology. The electrochemical detection hydrogen peroxide (H2O2) results show that, catkin-like CuAg nanocomposites have good sensitivity, stability and anti-interference and it could detect without any additional mediator or enzyme. Specifically, it shows good H2O2 sensitivity of 2.55 μA mM-1cm-2 with range of 0.1-120 mM. Therefore, the catkin-like CuAg nanocomposites prepared by an environmental-friendly synthetic strategy, would provide a good reference for other green syntheses in the future.

Nonenzymatic Glucose Sensor Based on Porous Co3O4 Nanoneedles

Herein, porous Co3O4 nanoneedle arrays were synthesized on nickel (Ni) foam (Co3O4 NNs/NF) by one-step hydrothermal method. Some electrochemical methods were used to investigate its nonenzymatic glucose sensing performance in alkaline solution. The results show that the sensitivity of Co3O4 NNs/NF electrode to glucose is 4570 μA mM-1 cm-2. The linear range is 1 μM-0.337 mM, and the detection limit is 0.91 μM ( $S/N=3$ ). It also displays good selectivity and repeatability for glucose. The good electrochemical sensing performance of Co3O4 NNs/NF based sensor for glucose can be attributed to interconnected porous structure and large specific surface area of Co3O4.

Graphene frameworks-confined synthesis of 2D-layered NiCoP for the electrochemical sensing of H2O2 at lower overpotential

A new 2D-layered nickel cobalt phosphide nanosheet confined by 3D graphene frameworks (denoted as NiCoP/GFs) is in situ controllably synthesized as a highly efficient and durable electrocatalyst, which is obtained from the transformation of corresponding NiCo layer double hydroxides and GFs. Hydrogen peroxide (H₂O₂) is selected as a demonstration to study the electrochemical sensing performance of the NiCoP/GFs. Benefiting from 2D morphology of NiCoP and network structure of GFs, NiCoP/GFs exhibits remarkable electroactivity toward H₂O₂ at a relatively low overpotential of approximately - 0.3 V (vs sat. Ag/AgCl) in 0.01 M phosphate-buffered saline solution (PBS, pH = 7.4). The NiCoP/GFs-based H₂O₂ electrochemical sensor achieves a high sensitivity of ∼4398 μA mM^-1 cm^-2, a low detection limit of 0.028 ± 0.006 μM, and desirable selectivity. In addition, the sensor can sensitively detect H₂O₂ from living cancer cells. This study not merely broadens the synthesis methods of transition metal phosphide-based nanocrystals but the NiCoP/GFs also has broad prospects in diverse electrochemistry fields. We have reported a controllable synthesis of 2D nickel cobalt phosphide nanosheet confined by graphene frameworks (denoted as NiCoP/GFs) as a greatly efficient and durable electrocatalyst. The NiCoP/GFs exhibits remarkable electroactivity toward detection of H₂O₂ at a relatively low overpotential of approximately -0.3 V. Density functional theory (DFT) calculations further prove that regulation of the electronic structure of NiCoP by GFs lowers the adsorption free energy of *OOH intermediates, and thus contributes to the greatly improved the electrocatalytic performance of NiCoP/GFs toward H₂O₂ reduction. The developed NiCoP/GFs can be applied as excellent electrode materials for efficient electrochemical sensing of H₂O₂.

Morphology Control Strategy of Bimetallic MOF Nanosheets for Upgrading the Sensitivity of Noninvasive Glucose Detection

The precise measurement of glucose level is significant for the health management of the human body. However, the existing sensitive materials and detection methods for glucose are less satisfying for practical applications. Herein, an ultrathin reticular two-dimensional nanosheets array composed of trimesic acid (H₃BTC)-based bimetal metal-organic frameworks (MOFs) and carbon cloth (CC), which is constructed through a morphology control strategy, is reported for glucose sensing. Meanwhile, this nonmoving sweat glucose sensor based on a NiCo-BTC/CC electrode has been successfully prepared by a screen printing method. Benefiting from the regular and ultrathin nanosheets array, the NiCo-BTC/CC electrode has an excellent sensitivity of 2701.29 μA mM^-1 cm^-2, which is about 2.4 times that of its unregulated counterpart (1127.85 μA mM^-1 cm^-2) in the linear range 5-205 μM. In addition, an ultralow detection limit (0.09 μM, S/N = 3) and good selectivity of NiCo-BTC/CC were also obtained. The high sensitivity of the glucose sensor based on NiCo-BTC/CC electrode is 0.174 μA μM^-1 (50-1000 μM). Remarkably, the preciously designed sensor is used to detect glucose concentration in sweat with a noninvasive mode, and the results are basically consistent with those of a commercial glucose device with an invasive mode. This research exhibits potential methodology for the morphology design of bimetallic MOFs nanosheets to achieve a high accuracy rate and noninvasive and timeless measurement of a glucose sensor.

Electrochemical Sensors for the Detection of Reactive Oxygen Species in Biological Systems: A Critical Review

Reactive oxygen species (ROS) involving superoxide anion, hydrogen peroxide and hydroxyl radical play important role in human health. ROS are known to be the markers of oxidative stress associated with different pathologies including neurodegenerative and cardiovascular diseases, as well as cancer. Accordingly, ROS level detection in biological systems is an essential problem for biomedical and analytical research. Electrochemical methods seem to have promising prospects in ROS determination due to their high sensitivity, rapidity, and simple equipment. This review demonstrates application of modern electrochemical sensors for ROS detection in biological objects (e.g., cell lines and body fluids) over a decade between 2011 and 2021. Particular attention is paid to sensors materials and various types of modifiers for ROS selective detection. Moreover, the sensors comparative characteristics, their main advantages, disadvantages and their possibilities and limitations are discussed.

Electrodes and electrocatalysts for electrochemical hydrogen peroxide sensors: a review of design strategies

H₂O₂ sensing is required in various biological and industrial applications, for which electrochemical sensing is a promising choice among various sensing technologies. Electrodes and electrocatalysts strongly influence the performance of electrochemical H₂O₂ sensors. Significant efforts have been devoted to electrode nanostructural designs and nanomaterial-based electrocatalysts. Here, we review the design strategies for electrodes and electrocatalysts used in electrochemical H₂O₂ sensors. We first summarize electrodes in different structures, including rotation disc electrodes, freestanding electrodes, all-in-one electrodes, and representative commercial H₂O₂ probes. Next, we discuss the design strategies used in recent studies to increase the number of active sites and intrinsic activities of electrocatalysts for H₂O₂ redox reactions, including nanoscale pore structuring, conductive supports, reducing the catalyst size, alloying, doping, and tuning the crystal facets. Finally, we provide our perspectives on the future research directions in creating nanoscale structures and nanomaterials to enable advanced electrochemical H₂O₂ sensors in practical applications.

Fluorescent-based nanosensors for selective detection of a wide range of biological macromolecules: A comprehensive review

Thanks to their unique attributes, such as good sensitivity, selectivity, high surface-to-volume ratio, and versatile optical and electronic properties, fluorescent-based bioprobes have been used to create highly sensitive nanobiosensors to detect various biological and chemical agents. These sensors are superior to other analytical instrumentation techniques like gas chromatography, high-performance liquid chromatography, and capillary electrophoresis for being biodegradable, eco-friendly, and more economical, operational, and cost-effective. Moreover, several reports have also highlighted their application in the early detection of biomarkers associated with drug-induced organ damage such as liver, kidney, or lungs. In the present work, we comprehensively overviewed the electrochemical sensors that employ nanomaterials (nanoparticles/colloids or quantum dots, carbon dots, or nanoscaled metal-organic frameworks, etc.) to detect a variety of biological macromolecules based on fluorescent emission spectra. In addition, the most important mechanisms and methods to sense amino acids, protein, peptides, enzymes, carbohydrates, neurotransmitters, nucleic acids, vitamins, ions, metals, and electrolytes, blood gases, drugs (i.e., anti-inflammatory agents and antibiotics), toxins, alkaloids, antioxidants, cancer biomarkers, urinary metabolites (i.e., urea, uric acid, and creatinine), and pathogenic microorganisms were outlined and compared in terms of their selectivity and sensitivity. Altogether, the small dimensions and capability of these nanosensors for sensitive, label-free, real-time sensing of chemical, biological, and pharmaceutical agents could be used in array-based screening and in-vitro or in-vivo diagnostics. Although fluorescent nanoprobes are widely applied in determining biological macromolecules, unfortunately, they present many challenges and limitations. Efforts must be made to minimize such limitations in utilizing such nanobiosensors with an emphasis on their commercial developments. We believe that the current review can foster the wider incorporation of nanomedicine and will be of particular interest to researchers working on fluorescence technology, material chemistry, coordination polymers, and related research areas.

Facile fabrication of GCE/Nafion/Ni composite, a robust platform to detect hydrogen peroxide in basic medium via oxidation reaction

Nickel particles alone can oxidize hydrogen peroxide but confronts extreme stability problem which imparts a barrier to act as sensor. The porous Nafion bed on glassy carbon electrode (GCE) surface provides the sureness of incorporating of Ni particles which was further exploited as an electrochemical sensor for H₂O₂ detection through oxidative degradation process. The simple electrochemical incorporation of Ni particles along the pores of Nafion improves the stability of the sensor significantly. The oxidative pathway of hydrogen peroxide on GCE/Nafion/Ni was probed by analyzing mass transfer dependent linear sweep voltammograms both in static and rotating modes along with chronoamperometry. An electron transfer step determines the overall reaction rate with k°= 2.72 × 10^-4 cm s^-1, which is supported by the values of transfer coefficient (β) in between (0.68-0.75). Sensing performance was evaluated by recording differential pulse voltammograms (DPVs) with the linear detection limit (LOD) of 1.8 μM and linear dynamic range (LDR) of 5-500 μM. Real samples from industrial sources were successfully quantified with excellent reproducibility mark GCE/Nafion/Ni electrode as an applicable sensor.

Carbon-based aerogels for biomedical sensing: Advances toward designing the ideal sensor

Carbon based aerogels are special solid-state materials comprised of interconnected networks of 3D nanostructures with high amount of air-filled nanoporous. They expand the structural properties along with physicochemical characteristics of nanoscale construction blocks to macroscale, and incorporate distinctive attributes of aerogels, like large surface area, high porosity, and low density, with particular features of the different constituents. These features impart aerogels with rapid response signal, high selectivity, and ultra-sensitivity for sensing diverse targets in biomedical media. This has prompted researchers to develop a variety of aerogel-based sensors with encouraging achievements. Hence, this work outlines sensing applications of aerogel-based sensors with a comprehensive overview on the carbon aerogel hybrid materials and their analytical performances. Authors tried to list advantages and limitations of the developed approach and introduced more potent research for possible devices designing. We also point out some challenges and future perspectives related to the improvement of high-efficiency aerogel-based sensors.

An Overview on Recent Progress of Metal Oxide/Graphene/CNTs-Based Nanobiosensors

Nanobiosensors are convenient, practical, and sensitive analyzers that detect chemical and biological agents and convert the results into meaningful data between a biologically active molecule and a recognition element immobilized on the surface of the signal transducer by a physicochemical detector. Due to their fast, accurate and reliable operating characteristics, nanobiosensors are widely used in clinical and nonclinical applications, bedside testing, medical textile industry, environmental monitoring, food safety, etc. They play an important role in such critical applications. Therefore, the design of the biosensing interface is essential in determining the performance of the nanobiosensor. The unique chemical and physical properties of nanomaterials have paved the way for new and improved sensing devices in biosensors. The growing demand for devices with improved sensing and selectivity capability, short response time, lower limit of detection, and low cost causes novel investigations on nanobiomaterials to be used as biosensor scaffolds. Among all other nanomaterials, studies on developing nanobiosensors based on metal oxide nanostructures, graphene and its derivatives, carbon nanotubes, and the widespread use of these nanomaterials as a hybrid structure have recently attracted attention. Nanohybrid structures created by combining these nanostructures will directly meet the future biosensors' needs with their high electrocatalytic activities. This review addressed the recent developments on these nanomaterials and their derivatives, and their use as biosensor scaffolds. We reviewed these popular nanomaterials by evaluating them with comparative studies, tables, and charts.

3D nitrogen-doped carbon nanofoam arrays embedded with PdCu alloy nanoparticles: Assembling on flexible microelectrode for electrochemical detection in cancer cells

In this work, we developed a novel and facile strategy for the synthesis of a highly active and stable electrocatalyst based on PdCu alloy nanoparticles (PdCu-ANPs) embedded in 3D nitrogen-doped carbon (NC) nanofoam arrays (NFAs), which were assembled on flexible carbon fiber (CF) microelectrode for in situ sensitive electrochemical detection of biomarker H₂O₂ in cancer cells. Our results showed that NC-NFAs support possessed a unique hierarchically porous architecture by integrating the macrospores in arrays scaffold within mesopores in individual NC nanofoam, which offered exceptionally large surface area for embedding high-density PdCu-ANPs in it as well as facilitated the mass transfer and molecular diffusion during the electrochemical reaction. Taking the advantages of the unique structural merit of NC-NFAs support and excellent electrocatalyitc properties of PdCu-ANPs that embedded in it, the resultant PdCu-ANPs/NC-NFAs modified CF microelectrode exhibited good electrochemical sensing performances towards H₂O₂ including a wide linear range from 2.0 μM to 3.44 mM, a low detection limit of 500 nM, as well as good reproducibility, stability and anti-interference ability. When used in real-time in situ tracking H₂O₂ secreted from different types of human colorectal cancer cells, i.e., HCT116, HT29, SW48 and LoVo, it can distinguish the types of cancer cells by measuring the number of extracellular H₂O₂ molecules released per cell, which demonstrates its great promise in cancer diagnose and management.

Oxygenated functional group-engaged electroless deposition of ligand-free silver nanoparticles on porous carbon for efficient electrochemical non-enzymatic H2O2 detection

The construction of metal-carbon nanostructures with enhanced performances using traditional methods, such as pyrolysis, photolysis, impregnation-reduction, etc., generally requires additional energy input, reducing agents and capping ligands, which inevitably increase the manufacturing cost and environmental pollution. Herein, a novel one-step substrate-induced electroless deposition (SIED) strategy is developed to synthesize ligand-free Ag NPs supported on porous carbon (PC) (Ag/PC). The PC matrix enriched with oxygenated functional groups has a low work function and thus a low redox potential compared to that of Ag+ ions, which induces the auto-reduction of Ag+ ions to Ag NPs. The as-synthesized Ag/PC-6 modified electrode can be used as an excellent nonenzymatic H2O2 sensor with a broad linear range of 0.001-20 mM, a low detection limit of 0.729 μM (S/N = 3), and a high response sensitivity of 226.9 μA mM-1 cm-2, outperforming most of the reported sensor materials. Moreover, this electrode can be applied to detect trace amounts of H2O2 in juice and milk samples below the permitted residual level in food packaging and the recovery of H2O2 is 99.6% in blood serum (10%) with good reproducibility. This study proposes an efficient approach for synthesizing a highly active supported Ag electrocatalyst, which shows significant potential for practical applications.

Direct Growth of Polycrystalline GaN Porous Layer with Rich Nitrogen Vacancies: Application to Catalyst-Free Electrochemical Detection

It has been demonstrated that defect engineering is an effective strategy to enhance the activity of materials. Herein, a polycrystalline GaN porous layer (PGP) with high catalytic activity was grown by self-assembly on GaN-coated sapphire substrate by using low-temperature (LT) MOCVD growth. Without doping, LT growth can significantly improve the activity and electrical conductivity of PGP, owing to the presence of rich N-vacancies (∼10²⁰ cm^-3). Identification of rich N-vacancies in the PGP material was realized by using atomically resolved STEM (AR-STEM) characterization. The optimized PGP was applied to catalyst-free electrochemical detection of H₂O₂ with a limit of detection (LOD) of 50 nM, a fast response speed of 3 s, a wide linear detection range (50 nM to 12 mM), and a high stability. The LOD is exceeding 40 fold lower than that of reported metal-catalyst decorated GaN. Moreover, a quantitative relationship between the sensing performances and N-vacancy of PGP was established. To our knowledge, it is the first time that intrinsic GaN materials can exhibit high catalytic activity.

General and fast synthesis of graphene frameworks using sugars for high-performance hydrogen peroxide nonenzymatic electrochemical sensor

3D graphene frameworks (GFs) are fast and scalably synthesized via a general and facile method from the rich biomass of sugars with the aid of molten salts, using glucose as the prototype, to obtain an effective sensing platform for sensitive nonenzymatic hydrogen peroxide (H₂O₂) detection. The electroactive area of the GFs/GCE (0.1437 cm²) is obviously higher than that of bare GCE (0.0653 cm²). The GFs are found to exhibit remarkable electrocatalytic activity toward H₂O₂ reduction while avoiding enzyme loading. The electrochemical sensor for H₂O₂ based on GFs displays a low detection limit of 0.032 ± 0.005 μM (S/N = 3) at a working potential of - 0.55 V in 0.01 M N₂-saturated phosphate-buffered saline (PBS, pH = 7.4) by an amperometric method. The sensor has good selectivity over other compounds such as ascorbic acid, dopamine, uric acid, NaCl, citric acid, and glucose. Moreover, the sensor shows excellent reproducibility with a relative standard deviation of 3.7% and acceptable stability after 30 days of usage. Furthermore, it can detect H₂O₂ released from living tumorigenic cells in real time. Most importantly, it is demonstrated that such GFs can be obtained from a variety of sugars (sucrose, fructose, lactose, and maltose). This work may offer a new general avenue for the synthesis of 3D GFs and promote the development of electrochemical sensors. Graphical abstract We have reported a general and fast method to synthesize GFs from sugars (glucose, sucrose, fructose, lactose, and maltose) with the addition of molten Na₂CO₃ salt as a template. The developed GFs can be applied as excellent electrode materials for efficient electrochemical sensing of H₂O₂.

Progress of Advanced Nanomaterials in the Non-Enzymatic Electrochemical Sensing of Glucose and H2O2

Non-enzymatic sensing has been in the research limelight, and most sensors based on nanomaterials are designed to detect single analytes. The simultaneous detection of analytes that together exist in biological organisms necessitates the development of effective and efficient non-enzymatic electrodes in sensing. In this regard, the development of sensing elements for detecting glucose and hydrogen peroxide (H₂O₂) is significant. Non-enzymatic sensing is more economical and has a longer lifetime than enzymatic electrochemical sensing, but it has several drawbacks, such as high working potential, slow electrode kinetics, poisoning from intermediate species and weak sensing parameters. We comprehensively review the recent developments in non-enzymatic glucose and H₂O₂ (NEGH) sensing by focusing mainly on the sensing performance, electro catalytic mechanism, morphology and design of electrode materials. Various types of nanomaterials with metal/metal oxides and hybrid metallic nanocomposites are discussed. A comparison of glucose and H₂O₂ sensing parameters using the same electrode materials is outlined to predict the efficient sensing performance of advanced nanomaterials. Recent innovative approaches to improve the NEGH sensitivity, selectivity and stability in real-time applications are critically discussed, which have not been sufficiently addressed in the previous reviews. Finally, the challenges, future trends, and prospects associated with advanced nanomaterials for NEGH sensing are considered. We believe this article will help to understand the selection of advanced materials for dual/multi non-enzymatic sensing issues and will also be beneficial for researchers to make breakthrough progress in the area of non-enzymatic sensing of dual/multi biomolecules.

Design and fabrication of cost-effective and sensitive non-enzymatic hydrogen peroxide sensor using Co-doped δ-MnO2 flowers as electrode modifier

The development of a cost-effective and highly sensitive hydrogen peroxide sensor is of great importance. Electrochemical sensing is considered the most sensitive technique for hydrogen peroxide detection. Herein, we reported a cost-effective and highly sensitive hydrogen peroxide sensor using Co-doped δ-MnO₂ (Co@δ-MnO₂) flower-modified screen-printed carbon electrode. The δ-MnO₂ and Co@δ-MnO₂ flowers were synthesized by employing a hydrothermal approach. Advanced techniques such as PXRD, SEM, FTIR, Raman, UV, EDX, BET, and TEM were utilized to confirm the formation of δ-MnO₂ and Co-doped δ-MnO₂ flowers. The fabricated sensor exhibited an excellent detection limit (0.12 μM) and sensitivity of 5.3 μAμM^-1 cm^-2.Graphical abstract.

Continuous and Rapid Synthesis of UiO-67 by Electrochemical Methods for the Electrochemical Detection of Hydroquinone

Continuous and rapid synthesis of UiO-67 under mild conditions has been achieved by electrochemical methods for the first time. In the reaction system, a zirconium sheet was utilized as electrodes and a metal source for the assembly of UiO-67. High-crystalline UiO-67 with a regular tetrahedral morphology of around 1 μm was obtained within 1.5 h under the optimized solvent composition, voltage, and temperature conditions. This electrochemical synthetic method of UiO-67 in our work overcomes the shortcomings of high temperature and pressure of a traditional solvothermal method, which proposes new ideas for the large-scale and rapid synthesis of UiO-67. The UiO-67 synthesized by an electrochemical method was prepared as a UiO-67-carbon paste electrode (CPE), which exhibited a linear response to hydroquinone (HQ) in the range of 5-300 μM with a detection limit of 3.6 × 10^-9 M (S/N = 3), for the electrochemical detection of HQ. It was confirmed that UiO-67-CPE possessed excellent reusability and antiinterference ability for the detection of HQ, and its detection ability even did not change after standing for 3 months. We further tried to apply UiO-67-CPE to the practical determination of HQ in tap water and river water samples, and the results proved that the recovery rate is 97.9-104.7% in real samples.

Flexible Active-Site Engineering of Monometallic Co-Layered Double Hydroxides for Achieving High-Performance Bifunctional Electrocatalyst toward Oxygen Evolution and H2O2 Reduction

It is highly desirable but challenging to develop a facile and scalable strategy to synthesize efficient bifunctional electrocatalysts for oxygen evolution and H₂O₂ reduction by engineering the active site of monometallic-layered double hydroxides (LDHs). Herein, we developed a convenient, efficient, and scalable method for the construction of monometallic Co-LDHs with tunable Coⁿ⁺ (n = 2, 3) concentration by a one-pot solvothermal reaction in a short time (e.g., 2 and 4 h) using only cobalt nitrate and hexamine as raw materials. The catalytic performance of Co-LDHs was mainly determined by the Coⁿ⁺ (n = 2, 3) concentration, which could be simply regulated by tuning the solvothermal time. Combining the joint merits of three-dimensional flowerlike architecture (abundant accessible active sites and a fast electron/mass transport), Co-LDHs-4 with abundant Co³⁺ species exhibited an excellent electrocatalytic activity for oxygen evolution reaction in terms of a low overpotential at 10 mA cm^-2 (η₁₀ = 241 mV) and long-term durability for 70 h at 100 mA cm^-2, better than the state-of-the-art IrO₂ and most of the reported analogues. Besides, Co-LDHs-2 enriched in Co²⁺ displayed a superior electrochemical activity for H₂O₂ detection with a broad linear range (0.002-20 mM), a low detection limit (0.002 mM), and a high response sensitivity (272.02 μA mM^-1 cm^-2). Therefore, this work opens a new horizon for the rational development of a highly active electrocatalyst with tunable concentrations of active components.

Design of Double-Shelled CuS Nanocages to Optimize Electrocatalytic Dynamic for Sensitive Detection of Ascorbic Acid

Although transition metal sulfides have presented prospect in electrochemical sensing, their electrocatalytic performance still cannot meet the demands for practical applications due to the difficulties in mass transport and electron transfer. In this work, double-shelled CuS nanocages (2-CuS NCs) were prepared for enzyme-free ascorbic (AA) sensor through a Cu2O- templated method. The unique double-shelled hollow structure displayed large specific surface areas, ordered diffusion channels, increased volume occupying rate, and accelerated electron transfer rate, resulting in enhanced electrochemical dynamic. As a sensing electrode for AA, 2-CuS NCs modified glassy carbon electrode (2-CuS NCs/GCE) exhibited eminent electrocatalytic activity in terms of satisfying sensitivity (523.7 μA mM-1 cm-2), short response time (0.31 s), and low limit of detection (LOD, 0.15 μM). 2-CuS NCs look promising for analytical sensing of AA in electrochemical sensors thanks to its prominent electrocatalytic kinetics issued from double-shelled hollow porous structure.

A novel electrochemical immunosensor for ultrasensitive detection of CA125 in ovarian cancer

In the current study, we report on the design and development of a novel electrochemical immunosensor for the detection of cancer antigen 125 (CA125) oncomarker. Polyamidoamine/gold nanoparticles (PAMAM/AuNPs) were used to increase the conductivity and enhance the number of antibodies (Abs) immobilized on the electrode surface. Three-dimensional reduced graphene oxide-multiwall carbon nanotubes (3DrGO-MWCNTs) were used to modify the glassy carbon electrode to improve the electrode conductivity and specific surface area. Ab and toluidine blue attached to O-succinyl-chitosan-magnetic nanoparticles (Suc-CS@MNPs) as a tracer. The poor solubility of chitosan (CS) was improved by succinic anhydride using a novel modification method. Under optimum condition, the developed immunosensor exhibited a wide linear range (0.0005-75 U/mL) and an excellent limit of detection around 6 μU/mL. The reliability of the engineered immunosensor in detecting CA125 was verified by standard addition recovery method, which was further compared to enzyme-linked immunosorbent assay (ELISA). The proposed immunosensor exhibited excellent stability, high selectivity and sensitivity, and good reproducibility. Based on the great performance of the engineered immunosensor, it is proposed as a robust and reliable diagnostic tool for the detection of CA125 in the clinic.

Rational Construction of 3D-Networked Carbon Nanowalls/Diamond Supporting CuO Architecture for High-Performance Electrochemical Biosensors

Tremendous demands for highly sensitive and selective nonenzymatic electrochemical biosensors have motivated intensive research on advanced electrode materials with high electrocatalytic activity. Herein, the 3D-networked CuO@carbon nanowalls/diamond (C/D) architecture is rationally designed, and it demonstrates wide linear range (0.5 × 10^-6 -4 × 10^-3 m), high sensitivity (1650 µA cm^-2 mm^-1 ), and low detection limit (0.5 × 10^-6 m), together with high selectivity, great long-term stability, and good reproducibility in glucose determination. The outstanding performance of the CuO@C/D electrode can be ascribed to the synergistic effect coming from high-electrocatalytic-activity CuO nanoparticles and 3D-networked conductive C/D film. The C/D film is composed of carbon nanowalls and diamond nanoplatelets; and owing to the large surface area, accessible open surfaces, and high electrical conduction, it works as an excellent transducer, greatly accelerating the mass- and charge-transport kinetics of electrocatalytic reaction on the CuO biorecognition element. Besides, the vertical aligned diamond nanoplatelet scaffolds could improve structural and mechanical stability of the designed electrode in long-term performance. The excellent CuO@C/D electrode promises potential application in practical glucose detection, and the strategy proposed here can also be extended to construct other biorecognition elements on the 3D-networked conductive C/D transducer for various high-performance nonenzymatic electrochemical biosensors.

A taurine-functionalized 3D graphene-based foam for electrochemical determination of hydrogen peroxide

We present a synthesis approach of taurine-functionalized graphene foam (a-NSGF) using hydrothermal reduction, freeze-drying and high temperature annealing. The higher temperature in annealing allowed the N/S atoms of taurine enter into the graphene lattice, which improves its electrocatalytic activity greatly. The a-NSGF consisting of taurine that modified into 3D layers of graphene and endow is of the rapid sensitive to hydrogen peroxide (H₂O₂). The electrode using a-NSGF modification reveals highly sensitive and stable towards the concentration change of H₂O₂ due to the stable 3D structure and good electrical conductivity of a-NSGF. A linear correlation between H₂O₂ concentration and the electrochemical signal is found to be in a range from 1.5 to 300 μM and the correlation coefficient is R² = 0.999. The modified electrode has been applied in the determination of H₂O₂ in rain samples and the results have been compared with the China National Standard Method. The recoveries range from 94.6% to 106.7%. These results show that the proposed sensor is promising for the development of novel electrochemical sensing for H₂O₂ determination.

Design of Ni(OH)2 nanocages@MnO2 nanosheets core-shell architecture to jointly facilitate electrocatalytic dynamic for highly sensitive detection of dopamine

In this work, Ni(OH)₂ nanocages@MnO₂ nanosheets core-shell architecture (Ni(OH)₂ NCs@MnO₂ NSs CSA) was successfully prepared through coordinated etching and precipitation (CEP) route followed by hydrothermal reaction, and then tested as sensitive electrode material for detection of dopamine (DA). The three dimensional (3D) hollow Ni(OH)₂ core effectively prevented the aggregation of MnO₂ NSs, leading to high utilization rate of MnO₂ NSs. Meanwhile, the two dimensional (2D) MnO₂ shell endowed Ni(OH)₂ NCs with larger specific area and abundant diffusion channels, facilitating mass transport. Ni(OH)₂ NCs@MnO₂ NSs CSA modified glassy carbon electrode (GCE) exhibited two satisfying sensitivities of 467.1 and 1249.9 μA mM^-1 cm^-2 within the two linear ranges of 0.02-16.30 μM and 18.30-118.58 μM, respectively. Furthermore, Ni(OH)₂ NCs@MnO₂ NSs CSA/GCE presented low detection limit of 1.75 nM and short response time of 1.14 s. Overall, Ni(OH)₂ NCs@MnO₂ NSs/GCE looks promising for analytical sensing of DA thanks to its prominent electrocatalytic dynamic issued from the 3D hollow structure@2D nanosheets core-shell architecture.