A rapid and simple extraction of anti-depressant drugs by effervescent salt-assisted dispersive magnetic micro solid-phase extraction method using new adsorbent Fe3O4@SiO2@N3

Dispersive magnetic solid phase extraction of triazole fungicides based on polybenzidine/magnetic nanoparticles in environmental samples

A polybenzidine-modified Fe3O4@SiO2 nanocomposite was successfully synthesized through a chemical oxidation method and employed as a novel sorbent in dispersive magnetic solid phase extraction (DMSPE) for the preconcentration and determination of three triazole fungicides (TFs), namely diniconazole, tebuconazole, and triticonazole in river water, rice paddy soil, and grape samples. The synthesis method involved a polybenzidine self-assembly coating on Fe3O4@SiO2 magnetic composite. Characterization techniques such as FT-IR, XRD, FESEM, EDX, and VSM were used to confirm the correctness of the synthesized nano-sorbent. The target TFs were determined in actual samples using the synthesized nanocomposite sorbent in combination with gas chromatography-flame ionization detection (FID). Several variables were carefully optimized , including the sample pH, sorbent dosage, extraction time, ionic strength, and desorption condition (solvent type, volume, and time). Under the optimized experimental conditions, the method exhibited linearity in the concentration range 5-1000 ng mL-1 for triticonazole and 2-1000 ng mL-1 for diniconazole and tebuconazole. The limits of detection (LOD) for the three TFs were in the range 0.6-1.5 ng mL-1. The method demonstrated acceptable precision with intra-day and inter-day relative standard deviation (RSD) values of less than 6.5%. The enrichment factors ranged from 248 to 254. Finally, the method applicability was evaluated by determining TFs in river water, rice paddy soil, and grape samples with recoveries in the range 90.5-106, indicating that the matrix effect was negligible in the proposed DMSPE procedure.

Rapid Determination of Three Organic Acids in Polygonum Vivipari Rhizoma via One Marker by HPLC-UV at Equal Absorption Wavelength and Effervescence-Assisted Matrix Solid-Phase Dispersion

A rapid HPLC-UV method for the determination of three organic acids (neochlorogenic acid, chlorogenic acid, and cryptochlorogenic acid) in Polygoni Vivipari Rhizoma (PVR) by one marker was developed. The sample was prepared by effervescence-assisted matrix solid-phase dispersion (EA-MSPD). The separation of compounds was performed on a Poroshell column. The equal absorption wavelength was set as follows: 292 nm (0∼7 min) and 324 nm (7∼10 min). The analytical time including sample extraction and HPLC separation time was 12 min. The analytical method validation such as accuracy (recoveries 99.85%-106.29% and RSD < 2.9%), precision (RSD < 1.3%), reproducibility (RSD < 1.7%), and stability tests (RSD < 0.7% in 24 h) proved that the established HPLC method was suitable for determination of three organic acids in PVR. The contents of three analytes obtained by the external standard method with three markers and the equal absorption wavelength method with one marker were similar (RSD ≤ 2.0%). The developed method, which is rapid and reference compound saving, is an improved quality evaluation method of PVR.

Stir bar sorptive-dispersive microextraction by a poly(methacrylic acid-co-ethylene glycol dimethacrylate)-based magnetic sorbent for the determination of tricyclic antidepressants and their main active metabolites in human urine

A poly(methacrylic acid-co-ethylene glycol dimethacrylate)-based magnetic sorbent was used for the rapid and sensitive determination of tricyclic antidepressants and their main active metabolites in human urine. This material was characterized by magnetism measurements, zeta potential, scanning electron microscopy, nitrogen adsorption-desorption isotherms, and thermogravimetric analysis. The proposed analytical method is based on stir bar sorptive-dispersive microextraction (SBSDME) followed by liquid chromatography-tandem mass spectrometry. The main parameters involved in the extraction step were optimized by using the response surface methodology as a multivariate optimization method, whereas a univariate approach was employed to study the desorption parameters. Under the optimized conditions, the proposed method was properly validated showing good linearity (at least up to 50 ng mL-1) and enrichment factors (13-22), limits of detection and quantification in the low ng L-1 range (1.4-7.0 ng L-1), and good intra- and inter-day repeatability (relative standard deviations below 15%). Matrix effects were observed for the direct analysis of urine samples, but they were negligible when a 1:1 v/v dilution with deionized water was performed. Finally, the method was successfully applied to human urine samples from three volunteers, one of them consuming a prescribed drug for depression that tested positive for clomipramine and its main active metabolite. Quantitative relative recoveries (80-113%) were obtained by external calibration. The present work expands the applicability of the SBSDME to new analytes and new types of magnetic sorbents.

Developments of Microextraction (Extraction) Procedures for Sample Preparation of Antidepressants in Biological and Water Samples, a Review

Antidepressants are an important class of drugs to treat various types of depression. The determination of antidepressants is crucial in biological samples to control adverse effects in humans and study pharmacokinetics and bioavailability. Direct measurement of antidepressants in biological and water samples is a considerable challenge for analysts due to their low concentration, the high matrix effects of real samples, and the presence of metabolites of these drugs in biological samples. The challenge leads to using sample preparation processes as a critical step in determining antidepressants. Extraction and microextraction procedures have been widely utilized as sample preparation procedures for these drugs. The purposes of extraction or microextraction methods for antidepressant medications are to preconcentrate the analyte, reduce the matrix effects, increase the selectivity of the procedures, and convert the sample to a suitable format for introducing it into detection systems. In the review, the various extraction and microextraction methods of these drugs in biological, real water, and wastewater samples were investigated. The theory of each technique was briefly addressed to understand the features and factors affecting each method. The extraction and microextraction methods were classified based on their application for antidepressants, and the advantages and disadvantages of each technique were reviewed. The new developments to overcome the limitations of each procedure were discussed. The investigation indicated the number of applications of liquid-phase microextraction for extracting antidepressants has been almost equal to that of solid-phase microextraction.

New Method for the Monitoring of Antidepressants in Oral Fluid Using Dried Spot Sampling

The increase in the consumption of antidepressants is a public health problem worldwide, as these are a class of compounds widely used in the treatment of several illnesses, such as depression and anxiety. This work aimed to develop and optimize a method for the quantification of a number of antidepressants and their metabolites (fluoxetine, venlafaxine, O-desmethylvenlafaxine, citalopram, sertraline, and paroxetine) in 100 µL of oral fluid using the dried saliva spots (DSS) sampling approach and gas chromatography coupled with tandem mass spectrometry (GC-MS/MS). The method was validated, presenting linearity within the studied range, with detection and quantification limits ranging between 10 and 100 ng/mL, and coefficients of determination (R²) of at least 0.99 for all analytes. Recoveries were between approximately 13 and 46%. The analysis of precision and accuracy presented acceptable coefficients of variation and relative errors, considering the criteria usually accepted in the validation of bioanalytical procedures. The method herein described is the first to be reported using DSS for the extraction of antidepressants, proving to be a sensitive, simple, and fast alternative to conventional techniques, and capable of being routinely applied in clinical and forensic toxicology scenarios.

An ionic covalent organic framework for rapid extraction of polar organic acids from environmental waters

An ionic covalent organic framework (Fe₃O₄@EB-TFB-iCOF) as a polar adsorbent was synthesized and characterized. It was applied in the magnetic solid phase extraction (MSPE) of four polar organic acids, namely, 2-(2,4,5-trichlorophenoxy)propionic acid, 2-methyl-4-chlorophenoxy acetic acid, naphthyloxyacetic acid, and naphthylacetic acid. The organic acids were detected by high performance liquid chromatography-ultraviolet analysis (HPLC-UV). A method for the determination of organic acids based on MSPE-HPLC-UV was established. The method shows good linear regression (R²≥ 0.9950), high precision (1.53-3.80%, n = 6), and low detection limit (0.10-0.49 ng mL^-1). The recovery rate of environmental water samples ranges from 73.3% to 101.0%. This method provides a possibility for high sensitivity analysis of polar organic acids.

Application of magnetic nanomaterials in bioanalysis

The importance of magnetic nanomaterials and magnetic hybrid materials, which are classified as new generation materials, in analytical applications is increasingly understood, and research on the adaptation of these materials to analytical methods has gained momentum. Development of sample preparation techniques and sensor systems using magnetic nanomaterials for the analysis of inorganic, organic and biomolecules in biological samples, which are among the samples that analytical chemists work on most, are among the priority issues. Therefore in this review, we focused on the use of magnetic nanomaterials for the bioanalytical applications including inorganic and organic species and biomolecules in different biological samples such as primarily blood, serum, plasma, tissue extracts, urine and milk. We summarized recent progresses, prevailing techniques, applied formats, and future trends in sample preparation-analysis methods and sensors based on magnetic nanomaterials (Mag-NMs). First, we provided a brief introduction of magnetic nanomaterials, especially their magnetic properties that can be utilized for bioanalytical applications. Second, we discussed the synthesis of these Mag-NMs. Third, we reviewed recent advances in bioanalytical applications of the Mag-NMs in different formats. Finally, recently literature studies on the relevance of Mag-NMs for bioanalysis applications were presented.

Efficient dispersive micro solid-phase extraction of antidepressant drugs by a robust molybdenum-based coordination polymer

A molybdenum-based coordination polymer {[Mo(PDA)(NO)(μ-O)MoO₃]·1.42H₂O·0.58C₂H₅OH}_n (1) (PDA is 1,10-phenanthroline-2,9-dicarboxylate) was synthesized using solvothermal reaction conditions and characterized using a suite of analytical techniques. Single-crystal X-ray diffraction studies reveal a 1D chain structure, with close contacts expanding the structure into 3D including π-interactions and hydrogen bonding. The utility of 1 as a sorbent for dispersive micro solid-phase extraction (D-μSPE) of basic organic compounds such as antidepressants is supported by the presence of many functional groups on the surface of 1 (such as pendant carboxylates, Mo=O, Mo-NO, and CH groups) as well as extensive electrostatic interactions. Therefore, 1 can be a suitable choice as sorbent in the D-μSPE of antidepressant drugs from human plasma samples via appreciable adsorbate-adsorbent interactions. Determination of the extracted antidepressant drugs was conducted using high-performance liquid chromatography-ultraviolet (HPLC-UV), with calibration plots being linear in the concentration range 0.1-500 ng mL^-1 for amitriptyline and nortriptyline, 0.2-500 ng mL^-1 for imipramine, and 0.5-300 ng mL^-1 for sertraline. The relative standard deviation (RSD) values were calculated for both intra-day and inter-day precision, and the RSD% values were in the range 3.9 to 5.2% and 4.6-5.4%, respectively. The limits of detection (LODs) was determined as 0.03-0.2 ng mL^-1. Due to the good stability and reusability of the sorbent, the adsorption capacity had no obvious decrease after being used 20 times. Finally, the D-μSPE-HPLC-UV method was applied for the determination of antidepressant drugs in human plasma samples with recoveries of the analytes in the range 94.9 to 102%. The article describes the synthesis of a robust molybdenum-based coordination polymer, and its application as sorbent for dispersive micro solid-phase extraction of antidepressant drugs from human plasma samples.

A dispersive solid phase extraction adsorbent based on aptamer modified chitosan nanofibers for zearalenone separation in corn, wheat, and beer samples

Highly selective separation of trace bio-toxins in food samples has long been a hot topic pursued by analytical chemists. In this paper, chitosan nanofibers prepared by freeze-drying were modified with aptamers for dispersive solid phase extraction (dSPE) of trace zearalenone. The morphology of achieved chitosan nanofibers was found to be uniform and continuous, and the length was at the micron level with about a 400 nm diameter. The immobilization capacity of the aptamer was as high as 10.1 μg on 5 mg chitosan nanofibers with good stability and repeatability, owing to the high specific surface area of nanofibers. The aptamer modified chitosan nanofibers (Apt-CNFs) showed specific selectivity to zearalenone with a selectivity coefficient of 2.65 compared to the scrambled oligonucleotide functionalized CNFs, and the selectivity factors over other analogs and reference compounds were from 1.57 to 50.0. After the optimization of extraction conditions, the Apt-CNF based dSPE was coupled with high-performance liquid chromatography for zearalenone monitoring, and a good linear range of 0.06-10.0 μg L-1 was achieved with a detection limit of 18.0 ng L-1. The spiking recoveries of 101-108%, 100-110%, and 98.3-101% were achieved for trace zearalenone in corn, wheat, and beer samples, respectively. The residual zearalenone was detected in corn and wheat with a content of 0.365 and 0.0775 μg g-1, respectively.

Effervescence-Assisted Microextraction-One Decade of Developments

Dispersive microextraction techniques are key in the analytical sample treatment context as they combine a favored thermodynamics and kinetics isolation of the target analytes from the sample matrix. The dispersion of the extractant in the form of tiny particles or drops, depending on the technique, into the sample enlarges the contact surface area between phases, thus enhancing the mass transference. This dispersion can be achieved by applying external energy sources, the use of chemicals, or the combination of both strategies. Effervescence-assisted microextraction emerged in 2011 as a new alternative in this context. The technique uses in situ-generated carbon dioxide as the disperser, and it has been successfully applied in the solid-phase and liquid-phase microextraction fields. This minireview explains the main fundamentals of the technique, its potential and the main developments reported.

Synthesis and toxicity assessment of Fe3O4 NPs grafted by ∼ NH2-Schiff base as anticancer drug: modeling and proposed molecular mechanism through docking and molecular dynamic simulation

Superparamagnetic iron oxide nanoparticles have been synthesized using chain length of (3-aminopropyl) triethoxysilane for cancer therapy. First, we have developed a layer by layer functionalized with grafting 2,4-toluene diisocyanate as a bi-functional covalent linker onto a nano-Fe₃O₄ support. Then, they were characterized by Fourier transform infrared, X-ray powder diffraction, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and VSM techniques. Finally, all nanoparticles with positive or negative surface charges were tested against K562 (myelogenous leukemia cancer) cell lines to demonstrate their therapeutic efficacy by MTT assay test. We found that the higher toxicity of Fe₃O₄@SiO₂@APTS ∼ Schiff base-Cu(II) (IC₅₀: 1000 μg/mL) is due to their stronger in situ degradation, with larger intracellular release of iron ions, as compared to surface passivated NPs. For first time, the molecular dynamic simulations of all compounds were carried out afterwards optimizing using MM+, Semi-empirical (AM1) and Ab-initio (STO-3G), Forcite Gemo Opt, Forcite Dynamics, Forcite Energy and CASTEP in Materials studio 2017. The energy (eV), space group, lattice parameters (Å), unit cell parameters (Å), and electron density of the predicted structures were taken from the CASTEP module of Materials Studio. The docking methods were used to predict the DNA binding affinity, ribonucleotide reductase, and topoisomerase II.

Synthesis, Characterization, Biomedical Application, Molecular Dynamic Simulation and Molecular Docking of Schiff Base Complex of Cu(II) Supported on Fe3O4/SiO2/APTS

INTRODUCTION

Over the past several years, nano-based therapeutics were an effective cancer drug candidate in order to overcome the persistence of deadliest diseases and prevalence of multiple drug resistance (MDR).

METHODS

The main objective of our program was to design organosilane-modified Fe3O4/SiO2/APTS(~NH2) core magnetic nanocomposites with functionalized copper-Schiff base complex through the use of (3-aminopropyl)triethoxysilane linker as chemotherapeutics to cancer cells. The nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), TEM, and vibrating sample magnetometer (VSM) techniques. All analyses corroborated the successful synthesis of the nanoparticles. In the second step, all compounds of magnetic nanoparticles were validated as antitumor drugs through the conventional MTT assay against K562 (myelogenous leukemia cancer) and apoptosis study by Annexin V/PI and AO/EB. The molecular dynamic simulations of nanoparticles were further carried out; afterwards, the optimization was performed using MM+, semi-empirical (AM1) and Ab Initio (STO-3G), ForciteGemo Opt, Forcite Dynamics, Forcite Energy and CASTEP in Materials studio 2017.

RESULTS

The results showed that the anti-cancer activity was barely reduced after modifying the surface of the Fe3O4/SiO2/APTS nanoparticles with 2-hydroxy-3-methoxybenzaldehyde as Schiff base and then Cu(II) complex. The apoptosis study by Annexin V/PI and AO/EB stained cell nuclei was performed that apoptosis percentage of the nanoparticles increased upon increasing the thickness of Fe3O4 shell on the magnetite core. The docking studies of the synthesized compounds were conducted towards the DNA and Topoisomerase II via AutoDock 1.5.6 (The Scripps Research Institute, La Jolla, CA, USA).

CONCLUSION

Results of biology activities and computational modeling demonstrate that nanoparticles were targeted drug delivery system in cancer treatment.

Recent Advances in the HPLC Analysis of Tricyclic Antidepressants in Bio-Samples

:

Tricyclic Antidepressants (TCAs) are a group of the main category of antidepressant drugs, which are commonly prescribed to treat major depressive disorder. Determination of TCA drugs is very important for clinical and forensic toxicology, especially for therapeutic drug monitoring in various biofluids. High Performance Liquid Chromatography (HPLC) is a well-established technique for this purpose. A lot of progress has been made in this field since the past 10 years. Novel extraction techniques, and novel materials for sample preparation, novel columns and novel applications of analysis of various biofluids for the determination of TCAs in combination with other drugs are some typical examples. Moreover, advances have been performed in terms of Green Analytical Chemistry principles. Herein, we aim to discuss the developed HPLC methods that were reported in the literature for the time span of 2008-2018.

The simple design of a new recyclable magnetic carbon graphite adsorbent based on 2-amino-5-mercapto-1,3,4-thiadiazole for the fast extraction of two anti-depressant drugs

In this work, an efficient magnetic nanoadsorbent, cubic SnFe₂O₄/graphitic carbon nitride (g-C₃N₄) modified by 2-amino-5-mercapto-1,3,4-thiadiazole (AMT), was synthesized.

A composite consisting of a deep eutectic solvent and dispersed magnetic metal-organic framework (type UiO-66-NH2) for solid-phase extraction of RNA

A cactus-shaped magnetic composite was prepared for solid-phase extraction of RNA. It is composed of the metal organic framework UiO-66-NH₂ that was modified with Fe₃O₄ nanoparticles. The composite was then dispersed in a lactic acid-based deep eutectic solvent (DES, Fe₃O₄-COOH@UiO-66-NH₂@DES). The structures of the sorbents were characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectrometry, vibrating sample magnetometry and thermogravimetric analysis. The extraction performance of sorbents was optimized and the maximum extraction capacity reached 246 mg·g^-1. Extraction is shown to mainly rely on chelation interaction, electrostatic interaction, hydrophobic interaction and hydrogen bonding interaction. The sorbent can selectively extract RNA over DNA, bovine hemoglobin and amino acids. Regeneration studies indicated that the sorbent can be re-used (after regenreation with DES) several times without obvious change of the extraction capacity. The successful extraction of RNA from yeast testified the practical application of the sorbent. Graphical abstractSchematic representation of the fabrication Fe₃O₄-COOH@UiO-66-NH₂@DES, and its application in the magnetic solid phase extraction of RNA.

Dispersive micro-solid phase extraction based on Fe3O4@SiO2@Ti-MOF as a magnetic nanocomposite sorbent for the trace analysis of caffeic acid in the medical extracts of plants and water samples prior to HPLC-UV analysis

In this work, Fe₃O₄@SiO₂@Ti-MOF-NCs, as an efficient sorbent, have been synthesized in a laboratory and utilized for extracting CA in the medical extracts of plants and water samples before their analysis by HPLC.