Superhydrophobic SERS substrates based on silver dendrite-decorated filter paper for trace detection of nitenpyram

Ultrasensitive detection of contaminants in milk using a novel NMS-Ag modified water-resistant paper substrate

Rapid and precise detection of harmful substances in food products is essential for ensuring public health and safety. This study introduces a novel surface-enhanced Raman spectroscopy (SERS) substrate, composed of a molybdenum disulfide‑silver nanocomposite, applied to flexible, water-resistant filter paper for detecting melamine and bisphenol A (BPA) in milk. Optimized molybdenum disulfide (NMS) nanoflowers (NFs) were synthesized through hydrothermal methods and high-temperature annealing, then modified with silver (Ag) nanoparticles to form the NMS-Ag nanocomposite (NMSA6). This substrate greatly enhances the Raman signal, achieving an enhancement factor of approximately 1.49 × 107 and a detection limit as low as 10-11 M for simultaneous multi-component analysis. Finite-difference time-domain (FDTD) simulations confirm the enhancement mechanism. The NMSA6 substrate demonstrates remarkably low detection limits for BPA and melamine, facilitating the analysis of various hazardous substances. These findings highlight the substrate's potential for highly sensitive, label-free detection, presenting a viable tool for food safety monitoring.

Surface-Enhanced Raman Spectroscopy Using a Silver Nanostar Substrate for Neonicotinoid Pesticides Detection

Surface-enhanced Raman spectroscopy (SERS) has been introduced to detect pesticides at low concentrations and in complex matrices to help developing countries monitor pesticides to keep their concentrations at safe levels in food and the environment. SERS is a surface-sensitive technique that enhances the Raman signal of molecules absorbed on metal nanostructure surfaces and provides vibrational information for sample identification and quantitation. In this work, we report the use of silver nanostars (AgNs) as SERS-active elements to detect four neonicotinoid pesticides (thiacloprid, imidacloprid, thiamethoxam and nitenpyram). The SERS substrates were prepared with multiple depositions of the nanostars using a self-assembly approach to give a dense coverage of the AgNs on a glass surface, which ultimately increased the availability of the spikes needed for SERS activity. The SERS substrates developed in this work show very high sensitivity and excellent reproducibility. Our research opens an avenue for the development of portable, field-based pesticide sensors, which will be critical for the effective monitoring of these important but potentially dangerous chemicals.

Paper-based substrates for surface-enhanced Raman spectroscopy sensing

Surface-enhanced Raman scattering (SERS) has been recognized as one of the most sensitive analytical methods by adsorbing the target of interest onto a plasmonic surface. Growing attention has been directed towards the fabrication of various substrates to broaden SERS applications. Among these, flexible SERS substrates, particularly paper-based ones, have gained popularity due to their easy-to-use features by full contact with the sample surface. Herein, we reviewed the latest advancements in flexible SERS substrates, with a focus on paper-based substrates. Firstly, it begins by introducing various methods for preparing paper-based substrates and highlights their advantages through several illustrative examples. Subsequently, we demonstrated the booming applications of these paper-based SERS substrates in abiotic and biological matrix detection, with particular emphasis on their potential application in clinical diagnosis. Finally, the prospects and challenges of paper-based SERS substrates in broader applications are discussed.

Spontaneous Redox-Reaction-Driven Growth of Ag Nanoparticles on Co(OH)2 Nanoflower Arrays for Surface-Enhanced Raman Scattering

A simple and reliable method is developed to fabricate Ag-nanoparticle-decorated Co(OH)₂ nanoflowers grafted on polyacrylonitrile (PAN) nanopillar arrays as uniform and sensitive surface-enhanced Raman scattering (SERS) substrates. First, Co(OH)₂-nanosheet-assembled nanoflowers are achieved on the highly uniform PAN nanopillar arrays via electrochemical deposition. Then, Ag nanoparticles (Ag-NPs) are decorated onto the Au-nanoparticle-precoated Co(OH)₂ nanoflowers based on a spontaneous redox reaction (SRR) between the silver ions and Co(OH)₂ nanosheets at room temperature. Ag-NPs can be successfully in situ synthesized on the Co(OH)₂ nanoflowers, and Au nanoparticles precoated on the surface of the Co(OH)₂ nanosheets can ensure that the Co(OH)₂ nanoflower structure does not collapse. Because of the highly uniform PAN nanopillar arrays and the high-density sub-10 nm gaps between the neighboring Ag-NPs on the surface of the Co(OH)₂ nanoflowers, the hierarchical three-dimensional Ag@Co(OH)_x grown on PAN nanopillar arrays can produce a reproducible and sensitive SERS effect. To verify the SERS performance of the substrate, 4-aminothiophenol (4-ATP) is used as the probe molecule, and the Ag@Co(OH)_x grown on PAN nanopillar arrays is employed as the SERS substrate. As a result, 4-ATP concentrations as low as 10^-10 M can still be identified, exhibiting high SERS activity. Additionally, the relative standard deviation value of the main characteristic peak of 10^-5 M 4-ATP is 9.43%, indicating good uniformity of the SERS signal of the substrate. The SRR between silver ions and Co(OH)₂ can provide a simple route to prepare heterostructures as SERS substrates, which has great potential for application in the field of analysis.

"Click" Reaction-Mediated Silk Fibroin-Functionalized Thiol-Branched Graphene Oxide Quantum Dots for Smart Sensing of Tetracycline

The abuse of tetracycline (TC) antibiotics causes the accumulation of their residue in the environment, which has an irreversible impact on food safety and human health. In light of this, it is vital to offer a portable, quick, efficient, and selective sensing platform to detect TC instantly. Herein, we have successfully developed a sensor using silk fibroin-decorated thiol-branched graphene oxide quantum dots through a well-known thiol-ene click reaction. It is applied to ratiometric fluorescence sensing of TC in real samples in the linear range of 0-90 nM, with the detection limit of 49.69, 47.76, 55.25, 47.90, and 45.78 nM for deionized water, chicken sample, fish sample, human blood serum, and honey sample, respectively. With the gradual addition of TC to the liquid media, the sensor develops a synergetic luminous effect in which the fluorescence intensity of the nanoprobe steadily declines at 413 nm, while the intensity of a newly emerging peak increases at 528 nm, maintaining a ratio that is dependent on the analyte concentration. The increase of luminescence properties in the liquid media is clearly visible by naked eyes in the presence of 365 nm UV light. The result helps us in building a filter paper strip-based portable smart sensor using an electric circuit comprising a 365 nm LED (light-emitting diode) powered by a mobile phone battery which is attached just below the rear camera of a smartphone. The camera of the smartphone captures the color changes that occur throughout the sensing process and translates into readable RGB data. The dependency of color intensity with respect to the concentration of TC was evaluated by deducing a calibration curve from where the limit of detection was calculated and found to be 0.125 μM. These kinds of gadgets are important for the possible real-time, on-the-spot, quick detection of analytes in situations where high-end approaches are not easily accessible.

Superhydrophobic modification of cellulosic paper-based materials: Fabrication, properties, and versatile applications

Cellulose is the cheapest and mostly widespread green raw material on earth. Due to the easy and versatile developed modification of cellulose, many cellulosic paper-based sustainable materials and their multifunctional applications have attained increasing interest under the background of the implementation of the "plastic ban" policy. However, intrinsic cellulose paper is hydrophilic and non-water-proof, which highly limited its application, thus becoming a bottleneck for the development of "cellulosic paper-based plastic replacement". Unquestioningly, the superhydrophobic modification of cellulosic paper-based materials and the extension of their high value-added applications are highly desired, which is the main content of this review. More importantly, we presented the comprehensive discussion of the functionalized applications of superhydrophobic cellulosic paper-based materials ranging from conventional products to high value-added functional materials such as paper straw and paper mulch film for the first time, which have great industrialization potential and value. This review would offer the valuable guidance and insightful information for the rational construction of sustainable superhydrophobic cellulosic paper for advanced functional devices.

Interfacial design for detection of a few molecules

Major advances in molecular detection are being driven by goals associated with the development of methods that are amenable to miniaturization and automation, and that have high sensitivity and low interference. The new detection methods are confronted by many interfacial issues, which when properly addressed can lead to improved performance. One interfacial property, special wettability, can facilitate precise delivery and local enrichment of molecules to sensing elements. This review summarizes applications of unique features of special wettability in molecular detection including (1) chemical and electrochemical reactions in anchored microdroplets on superwetting surfaces, (2) enrichment of analytes and active materials at low contact areas between droplets and superwetting surfaces, (3) complete opposite affinities of superwetting surfaces toward nonpolar/polar solutes and oil/water phases, and (4) directional droplet transportation on asymmetric superwetting surfaces. The challenges and opportunities that exist in design and applications of special wettability in interfacial delivery and enrichment for detection of a few molecules are also discussed.

Electrochemical synthesis of Co/Ni bimetal-organic frameworks: A high-performance SERS platform for detection of tetracycline

Surface-enhanced Raman scattering (SERS) enables food contaminants monitoring become facile and efficient. Herein, a facile strategy of integrating three-dimensional Ni form with Co/Ni bimetal-organic frameworks combining Ag nanoparticles via electrochemical synthesis method was proposed to develop a high-performance SERS substrate (CoNi-ZIFs@Ag@NF) for efficient detection of tetracycline. The flexible Ni foam (NF) acted as scaffold which can contribute to dramatically enhancing intrinsic electrical conductivity and endowing prepared substrate with high stability and uniform distribution of Ag nanoparticles. Furthermore, the pre-concentration effect of CoNi-ZIFs@Ag@NF for target molecules enhanced SERS performance dramatically. Besides, tetracycline was sensitively detected using CoNi-ZIFs@Ag@NF with low limit of detection (1.0 × 10^-11 M) and wide linear detection range (10^-10 - 10^-5 M) in aqueous solution. Also, the satisfactory recovery (94.45 - 114.25 %) was realized with less than 6.78 % of RSD in real samples. This method would provide a potential and high-performance substrate for SERS monitoring of tetracycline in food and environment.

An Integrated 3D Hydrophilicity/Hydrophobicity Design for Artificial Sweating Skin (i-TRANS) Mimicking Human Body Perspiration

Artificial skins reproducing properties of human skin are emerging and significant for study in various areas, such as robotics, medicine, and textiles. Perspiration, as one of the most imperative thermoregulation functions of human skin, is gaining increasing attention, but how to realize ideal artificial skin for perspiration simulation remains challenging. Here, an integrated 3D hydrophilicity/hydrophobicity design is proposed for artificial sweating skin (i-TRANS). Based on normal fibrous wicking materials, the selective surface modification with gradient of poly(dimethylsiloxane) (PDMS) creates hydrophilicity/hydrophobicity contrast in both lateral and vertical directions. With the additional help of bottom hydrophilic Nylon 6 nanofibers, the constructed i-TRANS is able to transport "sweat" directionally without trapping undesired excess water and attain uniform "secretion" of sweat droplets on the top surface, decently mimicking human skin perspiration situation. This fairly comparable simulation not only presents new insights for replicating skin properties, but also provides proper in vitro testing platforms for perspiration-relevant research, greatly avoiding unwanted interference from the "skin" layer. In addition, the facile, fast, and cost-effective fabrication approach and versatile usage of i-TRANS can further facilitate its application.

Recent Progress on Solid Substrates for Surface-Enhanced Raman Spectroscopy Analysis

Surface-enhanced Raman spectroscopy (SERS) is a powerful vibrational spectroscopy technique with distinguished features of non-destructivity, ultra-sensitivity, rapidity, and fingerprint characteristics for analysis and sensors. The SERS signals are mainly dependent on the engineering of high-quality substrates. Recently, solid SERS substrates with diverse forms have been attracting increasing attention due to their promising features, including dense hot spot, high stability, controllable morphology, and convenient portability. Here, we comprehensively review the recent advances made in the field of solid SERS substrates, including their common fabrication methods, basic categories, main features, and representative applications, respectively. Firstly, the main categories of solid SERS substrates, mainly including membrane substrate, self-assembled substrate, chip substrate, magnetic solid substrate, and other solid substrate, are introduced in detail, as well as corresponding construction strategies and main features. Secondly, the typical applications of solid SERS substrates in bio-analysis, food safety analysis, environment analysis, and other analyses are briefly reviewed. Finally, the challenges and perspectives of solid SERS substrates, including analytical performance improvement and largescale production level enhancement, are proposed.

Flexible Hydrophobic CFP@PDA@AuNPs Stripes for Highly Sensitive SERS Detection of Methylene Blue Residue

Considering the inherent hydrophilic and porous nature of paper, the rapid absorption and diffusion of aqueous analyte solutions on paper-based SERS substrates may severely affect the Raman detection sensitivity and accuracy in the detection of target molecules. In this work, a series of hydrophobic CFP@PDA@AuNPs stripes were obtained through in situ synthesizing of gold nanoparticles (AuNPs) on a polydopamine (PDA)-decorated cellulose filter paper (CFP) and functionalized with perfluorodecanethiol (PFDT). When the SERS performance of the substrates was examined using 4-ATP, the hydrophobic CFP@PDA@AuNPs substrate showed superior sensitivity, reproducibility and stability due to the hydrophobic enrichment effect, with the detection limit decreasing to 10−9 M and the enhancement factor as high as 2.55 × 107. More importantly, it was feasible to apply the hydrophobic paper substrate as an excellent SERS sensor to detect methylene blue (MB) residues in lake water in a highly sensitive manner. The lowest detectable limit of MB was 100 nM, and it showed a low relatively standard deviation (RSD) value of 5.28%. Hydrophobic CFP@PDA@AuNPs stripes may serve as excellent sensors for target molecule detection and have tremendous potential in food security, and environmental and chemical detection.

Optically active plasmonic cellulose fibers based on Au nanorods for SERS applications

Cellulose might be a promising material for surface-enhanced Raman scattering (SERS) substrates due to its wide availability, low cost, ease of fabrication, high flexibility and low optical activity. This work shows, for the first time development of the cellulose-based substrate, that owes its SERS activity to the presence of gold nanorods in its internal structure, and not only on the surface, as it is shown elsewhere, thus ensuring superior stability of the obtained material. This flexible cellulose-based substrate exhibiting plasmonic activity, provide easy and reproducible detection of different analytes via SERS technique. The substrate was prepared by introduction of gold nanorods into the cellulose fibers matrix using an eco-friendly process based on N-Methylmorpholine-N-Oxide. Au-modified cellulose fibers were used for the detection of p-Mercaptobenzoic acid and Bovine Serum Albumin by the SERS method. The obtained results show that this substrate offers large signal enhancement of 6-orders of magnitude, and high signal reproducibility with a relative standard deviation of 8.3%. Additionally, washing tests (90 °C, 20 h) showed superior stability of the as prepared plasmonic fibers, thus proving the good reusability of the substrates and the long shelf life.

Recent Advances and Applications in Paper-Based Devices for Point-of-Care Testing

Point-of-care testing (POCT), as a portable and user-friendly technology, can obtain accurate test results immediately at the sampling point. Nowadays, microfluidic paper-based analysis devices (μPads) have attracted the eye of the public and accelerated the development of POCT. A variety of detection methods are combined with μPads to realize precise, rapid and sensitive POCT. This article mainly introduced the development of electrochemistry and optical detection methods on μPads for POCT and their applications on disease analysis, environmental monitoring and food control in the past 5 years. Finally, the challenges and future development prospects of μPads for POCT were discussed.

Development of Au NPs-decorated filter paper as a SERS platform for the detection of benzidine

In this paper, a simple and cost-efficient strategy was used to construct a uniform Au NPs distribution on the surface of flexible filter paper for the detection of benzidine. Taking full advantage of the adsorption properties of filter paper, small gold nanoparticles were adsorbed onto its surface as gold seeds, and subsequently grown by electroless plating to form a highly uniform distribution of Au NPs substrates. By changing the electroless plating time, an optimal substrate was obtained. The as-prepared substrate exhibited satisfactory sensitivity with a low detection limit of 10-13 M for 4-ATP, and good reproducibility and homogeneity. Furthermore, the as-prepared substrates were successfully used for the detection of benzidine in environmental water, with a minimum detection concentration as low as 0.1 ppm and recoveries in the range of 92.4 to ∼108.5%. This study indicated that filter paper-based SERS substrates have great potential value in the detection of environmental organic pollutants.

Rapid field trace detection of pesticide residue in food based on surface-enhanced Raman spectroscopy

Surface-enhanced Raman spectroscopy is an alternative detection tool for monitoring food security. However, there is still a lack of a conclusion of SERS detection with respect to pesticides and real sample analysis, and the summary of intelligent algorithms in SERS is also a blank. In this review, a comprehensive report of pesticides detection using SERS technology is given. The SERS detection characteristics of different types of pesticides and the influence of substrate on inspection are discussed and compared by the typical ways of classification. The key points, including the progress in real sample analysis and Raman data processing methods with intelligent algorithm, are highlighted. Lastly, major challenges and future research trends of SERS analysis of pesticide residue are also addressed. SERS has been proven to be a powerful technique for rapid test of residue pesticides in complex food matrices, but there still is a tremendous development space for future research.

A Sensitive SERS Method for Determination of Pymetrozine in Apple and Cabbage Based on an Easily Prepared Substrate

Residual pesticides are one of the major food safety concerns around the world. There is a demand for simple and reliable methods to monitor pesticide residues in foods. In this study, a sensitive method for determination of pymetrozine in apple and cabbage samples using surface-enhanced Raman spectroscopy (SERS) based on decanethiol functionalized silver nanoparticles was established. The proposed method performed satisfactorily with the linear detection range of 0.01-1.00 mg/L and limit of detection (LOD) of 0.01 mg/L in methanol. In addition, it was successfully used to detect pymetrozine in apple and cabbage samples, the LOD was 0.02 and 0.03 mg/L, respectively, and the recoveries of spiked cabbage and apple ranged 70.40-104.00%, with relative standard deviations below 12.18% and 10.33% for intra-day and inter-day tests. Moreover, the results of the correlation test with real cabbage samples of liquid chromatography-tandem mass spectrometry showed that they were highly correlated (slope = 0.9895, R2 = 0.9953). This study provides a sensitive approach for detection of pymetrozine in apple and cabbage, which has great potential for determination of pymetrozine residues in food products.

Macro-meso-microporous carbon composite derived from hydrophilic metal-organic framework as high-performance electrochemical sensor for neonicotinoid determination

Electrochemical analysis enables pesticides monitoring become rapid and efficient. Herein, novel three dimensional nitrogen-doped macro-meso-microporous carbon composites (N/Cu-HPC) derived from polyvinylpyrrolidone (PVP) doped Cu-metal organic framework were successfully formed via one-pot solvothermal method followed by pyrolysis, which were further applied in high-performance electrochemical determination of neonicotinoid. The introduction of PVP endows the N/Cu-HPC good hydrophilicity preventing aggregation as well as more highly electronegative nitrogen species boosting electro-catalytic property dramatically. Interestingly, the macro-meso-microporous architecture improves mass and charge transports between neonicotinoid molecules and active sites such as Cu nanoparticles and carbon atoms possessing Lewis basicity next to pyridinic-N. Based on the N/Cu-HPC, imidacloprid (IDP), thiamethoxam (THA) and dinotefuran (DNF) were detected with wide linear detection ranges (0.5-60 μM for both IDP and DNF, 1-60 μM for THA) and low detection limits (0.026 μM for IDP, 0.062 μM for THA and 0.01 μM for DNF). Meanwhile, this sensor can be successfully used for determination of IDP, THA and DNF in oat, corn and rice with good recoveries (92.0-100.9%, RSD ≤ 4.8%), demonstrating that the N/Cu-HPC possesses a high potential to be an advanced sensing device for monitoring neonicotinoid in agricultural products.

Silver-nanoparticle-grafted silicon nanocones for reproducible Raman detection of trace contaminants in complex liquid environments

Super-hydrophobic delivery (SHD) is an efficient approach to enrich trace analytes into hot spot regions for ultrasensitive surface-enhanced Raman scattering (SERS) detection. In this article, we propose an efficient and simple method to prepare a highly-uniform SHD-SERS platform of high performance in trace detection, named as "silver-nanoparticle-grafted silicon nanocones" (termed AgNPs/SiNC) platform. It is fabricated via droplet-confined electroless deposition on the super-hydrophobic SiNC array. The AgNPs/SiNC platform allows trace analytes enriched into hot spots formed by AgNPs, leading to an excellent reproducibility and sensitivity. The relative standard deviation (RSD) for detecting R6G (10^-7 M) is down to 4.70% and the lowest detection concentration for R6G is 10^-14 M. Moreover, various contaminants in complex liquid environments, such as, crystal violet (10^-9 M) in lake water, melamine (10^-7 M) in liquid milk and methyl parathion (10^-7 M) in tap water, can be detected using the SERS platform. This result demonstrates the great potential of the AgNPs/SiNC platform in the fields of food safety and environmental monitoring.

Development of Two-Dimensional Nanomaterials Based Electrochemical Biosensors on Enhancing the Analysis of Food Toxicants

In recent times, food safety has become a topic of debate as the foodborne diseases triggered by chemical and biological contaminants affect human health and the food industry's profits. Though conventional analytical instrumentation-based food sensors are available, the consumers did not appreciate them because of the drawbacks of complexity, greater number of analysis steps, expensive enzymes, and lack of portability. Hence, designing easy-to-use tests for the rapid analysis of food contaminants has become essential in the food industry. Under this context, electrochemical biosensors have received attention among researchers as they bear the advantages of operational simplicity, portability, stability, easy miniaturization, and low cost. Two-dimensional (2D) nanomaterials have a larger surface area to volume compared to other dimensional nanomaterials. Hence, researchers nowadays are inclined to develop 2D nanomaterials-based electrochemical biosensors to significantly improve the sensor's sensitivity, selectivity, and reproducibility while measuring the food toxicants. In the present review, we compile the contribution of 2D nanomaterials in electrochemical biosensors to test the food toxicants and discuss the future directions in the field. Further, we describe the types of food toxicity, methodologies quantifying food analytes, how the electrochemical food sensor works, and the general biomedical properties of 2D nanomaterials.

Inkjet printed silver nanoparticles on hydrophobic papers for efficient detection of thiram

Silver nanoparticles coated paper (AgNPs-paper) substrates were prepared by inkjet printing Ag ink on four different wettability papers. Scanning electron microscope and contact angle analyzer were used to characterize their surface morphology and wettability. AgNPs-paper substrates were used to detect the surface-enhanced Raman scattering (SERS) spectra of thiram aqueous solution. Relationships between the surface wettability, surface morphology and SERS activities of the substrates were systematically studied. The silver nanoparticles deposited on the hydrophobic papers (photographic paper, graph paper, and weighing paper) were evenly and densely arranged. While in-homogeneous distribution was observed on the hydrophilic printing paper. It can be found that the AgNPs-photographic paper with the maximum contact angle exhibited the highest SERS enhancement. The detection limit for thiram adsorbed on the AgNPs-photographic paper was 10^-10 mol/L, which was lower than the others. Good linear responses (R² = 0.9918, 0.9897) between the SERS intensities and logarithmic concentrations were obtained from 10⁴ to 10^-10 mol/L. Moreover, the substrate had good uniformity and reproducibility with relative standard deviation values of 4.20% and 4.90% measured by eight points and ten substrates, respectively. The AgNPs-photographic paper exhibited high stability within eight months.

Rapid simultaneous adsorption and SERS detection of acid orange II using versatile gold nanoparticles decorated NH2-MIL-101(Cr)

Acid orange II (AO II), a typical azo pigment, is strictly controlled by legislation and prohibited in foodstuffs. Herein, we prepared gold nanoparticles decorated amino-functionalized Cr-based metal-organic frameworks [NH₂-MIL-101(Cr)@Au] via an in-situ reduction method as a surface-enhanced Raman scattering (SERS) substrate for simultaneous adsorption and detection of AO II. Gold nanoparticles are uniformly dispersed on the surface of NH₂-MIL-101(Cr) owing to its three-dimensional (3D) structure and the interaction between -NH₂ and Au ions, providing more SERS-active "hot spots". These NH₂-MIL-101(Cr)@Au nanocomposites exhibited selective and high adsorption performance (419.85 mg g^-1) for AO II, and could be used as superior SERS substrates for the detection of AO II with a low limit of detection (LOD) of 0.05 mg L^-1 and wide detection range of 0.05-50 mg L^-1 using portable Raman spectrometer. Furthermore, this SERS assay has been successfully used to determine AO II in orange juice and chili powder with good sensitivities.

Electrochemical behavior of reduced graphene oxide/cyclodextrins sensors for ultrasensitive detection of imidacloprid in brown rice

Various pesticides employed in modern agriculture result in large amounts of pesticide residues in agricultural production, greatly threatening human health. Herein, we report a facile approach to fabricate a reduced graphene oxide/cyclodextrin modified glassy carbon electrode (rGO/CD/GCE) for the sensitive electrochemical sensing of imidacloprid (IDP). Three different modified electrodes using CDs (α-, β-, γ-CD) were fabricated, and their electrochemical performance was further studied. The results demonstrate that α-CD possesses the best signal amplification for IDP. Compared with wet-chemical synthesis of rGO/CDs (W-rGO/CDs), the electrochemical synthesis of rGO/CDs (E-rGO/CDs) produced sensors that showed better performance for IDP sensing. Taking advantage of prepared E-rGO/α-CD nanocomposite, the fabricated sensor offered a low detection limit (0.02 μM) with a wider linear range (0.5-40 μM) and long-term stability. The new sensor was successfully applied for the detection of IDP in brown rice, providing a new technique for efficient and convenient monitoring of pesticide residues in food.

Patterned Superhydrophobic SERS Substrates for Sample Pre-Concentration and Demonstration of Its Utility through Monitoring of Inhibitory Effects of Paraoxon and Carbaryl on AChE

We describe a patterned surface-enhanced Raman spectroscopy (SERS) substrate with the ability to pre-concentrate target molecules. A surface-adsorbed nanosphere monolayer can serve two different functions. First, it can be made into a SERS platform when covered by silver. Alternatively, it can be fashioned into a superhydrophobic surface when coated with a hydrophobic molecular species such as decyltrimethoxy silane (DCTMS). Thus, if silver is patterned onto a latter type of substrate, a SERS spot surrounded by a superhydrophobic surface can be prepared. When an aqueous sample is placed on it and allowed to dry, target molecules in the sample become pre-concentrated. We demonstrate the utility of the patterned SERS substrate by evaluating the effects of inhibitors to acetylcholinesterase (AChE). AChE is a popular target for drugs and pesticides because it plays a critical role in nerve signal transduction. We monitored the enzymatic activity of AChE through the SERS spectrum of thiocholine (TC), the end product from acetylthiocholine (ATC). Inhibitory effects of paraoxon and carbaryl on AChE were evaluated from the TC peak intensity. We show that the patterned SERS substrate can reduce both the necessary volumes and concentrations of the enzyme and substrate by a few orders of magnitude in comparison to a non-patterned SERS substrate and the conventional colorimetric method.

Two luminescent dye@MOFs systems as dual-emitting platforms for efficient pesticides detection

Pesticides, which can accumulate in soil, water, animals and plants, are essential to world agriculture. Developing a method that can efficiently and quickly detect toxic pesticides is of importance but still a challenge. Here, two luminescent dye@MOFs systems, Rho B@1 and Rho 6G@1, were successfully fabricated based on [Cd₂(tib)(btb)(H₂O)₂]∙NO₃∙2DMF (1). This work is the first use of two fluorescent sensors as dual-emitting platforms for detecting pesticides. As a result, the fluorescence intensity ratios between the two main emissions can be tuned using the concentrations of the dye solutions, and the emissions are at 370 nm/606 nm and 370 nm/590 nm for Rho B@1 and Rho 6G@1, respectively. The intensities of the two main emissions of Rho B@1 and Rho 6G@1 are also influenced by the chemical structures of pesticides with electron-withdrawing groups. It is important that high sensitivity and selectivity for sensing pesticides must have good recyclability. Rho B@1 and Rho 6G@1 can still remain stable regarding the detection of nitenpyram even after 5 cycles, with LODs of 0.48 nM for Rho B@1 and 3 nM for Rho 6G@1, which indicate that these two luminescent dye@MOFs systems are excellent fluorescence probe candidates for the selective detection of pesticides.

A review on recent advances in the applications of surface-enhanced Raman scattering in analytical chemistry

This review is focused on recent developments of surface-enhanced Raman scattering (SERS) applications in Analytical Chemistry. The work covers advances in the fabrication methods of SERS substrates, including nanoparticles immobilization techniques and advanced nanopatterning with metallic features. Recent insights in quantitative and sampling methods for SERS implementation and the development of new SERS-based approaches for both qualitative and quantitative analysis are discussed. The advent of methods for pre-concentration and new approaches for single-molecule SERS quantification, such as the digital SERS procedure, has provided additional improvements in the analytical figures-of-merit for analysis and assays based on SERS. The use of metal nanostructures as SERS detection elements integrated in devices, such as microfluidic systems and optical fibers, provided new tools for SERS applications that expand beyond the laboratory environment, bringing new opportunities for real-time field tests and process monitoring based on SERS. Finally, selected examples of SERS applications in analytical and bioanalytical chemistry are discussed. The breadth of this work reflects the vast diversity of subjects and approaches that are inherent to the SERS field. The state of the field indicates the potential for a variety of new SERS-based methods and technologies that can be routinely applied in analytical laboratories.

Mussel-Inspired Fabrication of SERS Swabs for Highly Sensitive and Conformal Rapid Detection of Thiram Bactericides

As an important sort of dithiocarbamate bactericide, thiram has been widely used for fruits, vegetables and mature crops to control various fungal diseases; however, the thiram residues in the environment pose a serious threat to human health. In this work, silver nanoparticles (AgNPs) were grown in-situ on cotton swab (CS) surfaces, based on the mussel-inspired polydopamine (PDA) molecule and designed as highly sensitive surface-enhanced Raman scattering (SERS) swabs for the conformal rapid detection of bactericide residues. With this strategy, the obtained CS@PDA@AgNPs swabs demonstrated highly sensitive and reproducible Raman signals toward Nile blue A (NBA) probe molecules, and the detection limit was as low as 1.0 × 10-10 M. More critically, these CS@PDA@AgNPs swabs could be served as flexible SERS substrates for the conformal rapid detection of thiram bactericides from various fruit surfaces through a simple swabbing approach. The results showed that the detection limit of thiram residues from pear, grape and peach surfaces was approximately down to the level of 0.12 ng/cm2, 0.24 ng/cm2 and 0.15 ng/cm2 respectively, demonstrating a high sensitivity and excellent reliability toward dithiocarbamate bactericides. Not only could these SERS swabs significantly promote the collection efficiency of thiram residues from irregular shaped matrices, but they could also greatly enhance the analytical sensitivity and reliability, and would have great potential for the on-site detection of residual bactericides in the environment and in bioscience fields.