Capillary electrophoresis of small ions and molecules in less conventional human body fluid samples: A review

Current green capillary electrophoresis and liquid chromatography methods for analysis of pharmaceutical and biomedical samples (2019-2023) - A review

Separation analytical methods, including liquid chromatography (LC) and capillary electrophoresis (CE), in combination with an appropriate detection technique, are dominant and powerful approaches preferred in the analysis of pharmaceutical and biomedical samples. Recent trends in analytical methods are focused on activities that push them to the field of greenness and sustainability. New approaches based on the implementation of greener solvents, non-hazardous chemicals, and reagents have grown exponentially. Similarly, recent trends are pushed in to the strategies based on miniaturization, reduction of wastes, avoiding derivatization procedures, or reduction of energy consumption. However, the real greenness of the analytical method can be evaluated only according to an objective and sufficient metric offering complex results taking into account all twelve rules of green analytical chemistry (SIGNIFICANCE mnemonic system). This review provides an extensive overview of papers published in the area of development of green LC and CE methods in the field of pharmaceutical and biomedical analysis over the last 5 years (2019-2023). The main focus is situated on the metrics used for greenness evaluation of the methods applied for the determination of bioactive agents. It critically evaluates and compares the demands of the real applicability of the methods in quality control and clinical environment with the requirements of the green analytical chemistry (GAC). Greenness and practicality of the summarized methods are re-evaluated or newly evaluated with the use of the dominant metrics tools, i.e., Analytical GREEnness (AGREE), Green Analytical Procedure Index (GAPI), Blue Applicability Grade Index (BAGI), and Sample Preparation Metric of Sustainability (SPMS). Moreover, general conclusions and future perspectives of the greening procedures and greenness evaluation metrics systems are presented. This paper should provide comprehensive information to analytical chemists, biochemists, and it can also represent a valuable source of information for clinicians, biomedical or quality control laboratories interested in development of analytical methods based on greenness, practicality, and sustainability.

Colorimetric detection of electrolyte ions in blood based on biphasic microdroplet extraction

BACKGROUND

Timely diagnosis and prevention of diseases require rapid and sensitive detection of biomarkers from blood samples without external interference. Abnormal electrolyte ion levels in the blood are closely linked to various physiological disorders, including hypertension. Therefore, accurate, interference-free, and precise measurement of electrolyte ion concentrations in the blood is particularly important.

RESULTS

In this work, a colorimetric sensor based on a biphasic microdroplet extraction is proposed for the detection of electrolyte ions in the blood. This sensor employs mini-pillar arrays to facilitate contact between adjacent blood microdroplets and organic microdroplets serving as sensing phases, with any color changes being monitored through a smartphone's colorimetric software. The sensor is highly resistant to interference and does not require pre-treatment of the blood samples. Remarkably, the sensor exhibits exceptional reliability and stability, allowing for rapid enrichment and detection of K+, Na+, and Cl- in the blood within 10 s (Cl-), 15 s (K+) and 40 s (Na+) respectively.

SIGNIFICANCE

The colorimetric sensor based on biphasic microdroplet extraction offers portability due to its compact size and ease of operation without the need for large instruments. Additionally, it is location-independent, making it a promising tool for real-time biomarker detection in body fluids such as blood.

Dried Blood Spots and Miniaturized Ultrasonic Nebulization Microplasma Optical Emission Spectrometry for Point-of-Care Testing of Blood Lithium

Despite the significant importance of blood lithium (Li) detection in the treatment of bipolar disorder (BD), its point-of-care testing (POCT) remains a great challenge due to tedious sample preparation and the use of large-footprint atomic spectrometers. Herein, a system coupling dried blood spots (DBS) with a point discharge optical emission spectrometer equipped with a miniaturized ultrasonic nebulizer (MUN-μPD-OES) was developed for POCT of blood Li. Three microliters of whole blood were used to prepare a dried blood spot on a piece of filter paper to which 10 μL of eluent (1% (v/v) formic acid and 0.05% (v/v) Triton-X) was added. Subsequently, the paper was placed onto the vibrating steel membrane of the ultrasonic nebulizer and powered on to generate aerosol. The aerosol was directly introduced to the μPD-OES for quantification of Li by monitoring its atomic emission line at 670.8 nm. The proposed method minimized matrix interference caused by high levels of salts and protein. It is worth noting that the MUN suitably matches the needs of DBS sampling and can provide aerosolized introduction of Li into the assembled μPD-OES, thus eliminating all tedious sample preparation and the need for a commercial atomic spectrometer. Calibration response is linear in the therapeutic range and a limit of detection (LOD) of 1.3 μg L-1 is well below the Li minimum therapeutic concentration (2800 μg L-1). Li in mouse blood was successfully detected in real-time using MUN-μPD-OES after intraperitoneal injection of lithium carbonate, confirming that the system holds great potential for POCT of blood Li for patients with BD.

Capillary electrophoresis using triple layer modified capillary facilitating salivary ion analyses: Application to search for potential stress markers induced by cold pressure test

In this study, we introduce a novel approach for the analysis of salivary ions using capillary electrophoresis (CE) with a triple-layer coated capillary. The capillary is sequentially coated with cationic silylating reagents, poly(vinylsulfonate), and polybrene to form a custom designed surface that effectively inhibits adsorption of protein matrix on the capillary inner wall and allows for reproducible ion analysis. For the CE with capacitively coupled contactless conductivity detection, we used suitable background electrolytes (BGEs) for salivary ion analysis. Anions were separated using a mixture of 2-(N-morpholino)ethanesulfonic acid and l-arginine, and cations were separated using that with 18-crown-6. This setup enabled rapid separation, within 4 min, together with sensitive detection. We quantified nine common anions and five cations typically found in saliva samples using this CE method, both before and after a cold pressure test (CPT, a standard stress test). The CE system demonstrated consistent ion separation across 30 consecutive measurements without requiring capillary replacement. Notably, the salivary ion balance remained predominantly anion-rich, regardless of the CPT. Cold water exposure induced greater variation in the total anion concentration than in the total cation concentration. Further analysis using multiple regression analysis revealed strong relationships between nitrate and nitrite, formate and phosphate, and potassium and nitrate, before and after the CPT. Notably, potassium and nitrate ions exhibited variations in response to stress. These results provided a method for assessing salivary ion composition and insights into the potential of salivary ions as biomarkers for stress.

Internal validation of the GA118-24B Genetic Analyzer, a stable capillary electrophoresis system for forensic DNA identification

The GA118-24B Genetic Analyzer (hereafter, "GA118-24B") is an independently developed capillary electrophoresis instrument. In the present research, we designed a series of validation experiments to test its performance at detecting DNA fragments compared to the Applied Biosystems 3500 Genetic Analyzer (hereafter, "3500"). Three commercially available autosomal short tandem repeat multiplex kits were used in this validation. The results showed that GA118-24B had acceptable spectral calibration for three kits. The results of accuracy and concordance studies were also satisfactory. GA118-24B showed excellent precision, with a standard deviation of less than 0.1 bp. Sensitivity and mixture studies indicated that GA118-24B could detect low-template DNA and complex mixtures as well as the results generated by 3500 in parallel experiments. Based on the experimental results, we set specific analytical and stochastic thresholds. Besides, GA118-24B showed superiority than 3500 within certain size ranges in the resolution study. Instead of conventional commercial multiplex kits, GA118-24B performed stably on a self-developed eight-dye multiplex system, which were not performed on 3500 Genetic Analyzer. We compared our validation results with those of previous research and found our results to be convincing. Overall, we conclude that GA118-24B is a stable and reliable genetic analyzer for forensic DNA identification.

Capillary electrophoresis with capacitively coupled contactless conductivity detection (C4 D) for rapid and simple determination of lactate in sweat

An analytical method based on capillary electrophoresis (CE) using capacitively coupled contactless conductivity detection (C4 D) was developed and validated for fast, straightforward, and reliable determination of lactate in artificial and human sweat samples. The background electrolyte was composed of equimolar concentrations (10 mmol/L) of 2-(N-morpholino)ethanesulfonic acid and histidine, with 0.2 mmol/L of cetyltrimethylammonium bromide as electroosmotic flow inverter. The limit of detection and quantification were 3.1 and 10.3 µmol/L, respectively. Recoveries in the 97 to 118% range were obtained using sweat samples spiked with lactate at three concentration levels, indicating an acceptable accuracy. The intraday and interday precisions were 1.49 and 7.08%, respectively. The proposed CE-C4 D method can be a starting point for monitoring lactate concentrations in sweat samples for diagnostics, physiological studies, and sports performance assessment applications.

Steady state microdialysis of microliter volumes of body fluids for monitoring of amino acids by capillary electrophoresis with contactless conductivity detection

BACKGROUND

The availability of dialysis membranes in the form of hollow fibres with diameters compatible with the fused silica capillaries used in capillary electrophoresis is very limited. However, haemodialysis bicarbonate cartridges commonly used in human medicine containing polysulfone hollow fibres are available on the market and are used for the fabrication of coaxial microdialysis probes. The miniature probe design ensures that steady-state conditions are achieved during microdialysis of minimal volumes of body fluids.

RESULTS

A coaxial microdialysis probe with a length of 5 cm and an inner diameter of 200 μm is used for microdialysis of 10 μL of body fluid collected into a sampling fused silica capillary with an inner diameter 430 μm. Microdialysis is performed into 0.01 M HCl as a perfusate at stopped flow and 2 μL of the resulting microdialysate are subjected to analysis by capillary electrophoresis with contactless conductivity detection. Microdialysis pre-treatment is verified by analysis of 11 common amino acids at a 100 μM concentration level, resulting in recoveries of 98.3-102.5%. The electrophoretic separation of amino acids is performed in 8.5 M acetic acid at pH 1.37 as a background electrolyte with analysis time up to 4.5 min and LOD in the range of 0.12-0.28 μM. The reproducibility of the developed technique determined for the peak area ranges from 1.2 to 4.5%. Applicability is tested in the quantification of valine and leucine in plasma during fasting and subsequent reconvalescence.

SIGNIFICANCE

The fabrication of a coaxial microdialysis probe for the laboratory preparation of microliter volumes of various types of clinical samples is described, which is coupled off-line with capillary electrophoretic monitoring of amino acids in 2 μL volumes of microdialysate. The developed methodology is suitable for quantification of 20 amino acids in whole human blood, plasma, tears and has potential for analysis of dry blood spots captured on hollow fibre.

Capillary electrophoresis in the analysis of therapeutic peptides-A review

Therapeutic peptides are a growing class of innovative drugs with high efficiency and a low risk of adverse effects. These biomolecules fall within the molecular mass range between that of small molecules and proteins. However, their inherent instability and potential for degradation underscore the importance of reliable and effective analytical methods for pharmaceutical quality control, therapeutic drug monitoring, and compliance testing. Liquid chromatography-mass spectrometry (LC-MS) has long time been the "gold standard" conventional method for peptide analysis, but capillary electrophoresis (CE) is increasingly being recognized as a complementary and, in some cases, superior, highly efficient, green, and cost-effective alternative technique. CE can separate peptides composed of different amino acids owing to differences in their net charge and size, determining their migration behavior in an electric field. This review provides a comprehensive overview of therapeutic peptides that have been used in the clinical environment for the last 25 years. It describes the properties, classification, current trends in development, and clinical use of therapeutic peptides. From the analytical point of view, it discusses the challenges associated with the analysis of therapeutic peptides in pharmaceutical and biological matrices, as well as the evaluation of CE as a whole and the comparison with LC methods. The article also highlights the use of microchip electrophoresis, nonaqueous CE, and nonconventional hydrodynamically closed CE systems and their applications. Overall, the article emphasizes the importance of developing new CE-based analytical methods to ensure the high quality, safety, and efficacy of therapeutic peptides in clinical practice.

Recent advances of drugs monitoring in oral fluid and comparison with blood

The use of alternative matrices in toxicological analyses has been on the rise in clinical and forensic settings. Oral fluid (OF), as non-invasive fluid, has attracted attention in the field of drug screening, both for therapeutic and forensic purposes, as well as for medical diagnosis, clinical management, on-site (real time) doping and for monitoring environmental exposure to toxic substances. A good correlation between OF and blood is now established for drug concentrations. Therefore, OF might be a potential substitute of blood, especially for long-term surveillance (e.g., therapeutic drugs) or to screen a large number of patients, as well as for the development of salivary point-of-care technologies. In this review, we aimed to summarize and critically evaluate the current literature that focused on the comparison of drugs detection in OF and blood specimens.

Nitrites: An Old Poison or a Current Hazard? Epidemiology of Intoxications Covering the Last 100 Years and Evaluation of Analytical Methods

In recent times, there has been a concerning and noteworthy rise in the global use of sodium nitrite for suicidal purposes. This is facilitated either through the employment of specialized "suicide kits" or by acquiring sodium nitrite through alternative means. Additionally, another occurrence contributing to nitrite poisoning is the recreational utilization of nitrites in the form of volatile aliphatic esters of nitrous acid, commonly referred to as "poppers". Based on current available papers and reports on the subject of nitrates, nitrites, and poppers intoxications, an epidemiological analysis and evaluation of analytical methods were performed. A total of 128 papers, documenting a collective count of 492 intoxication cases, were identified. Additionally, in order to complete the epidemiological profile of nitrite poisoning, the authors briefly examined six cases of nitrite intoxication that were under investigation in our laboratory. Furthermore, a review of nitrite poisoning cases over the past 100 years shows that the old poison is still in use and poses a substantial risk to society.

Two-step pressure injection-assisted online enrichment of herbicides from foods with affinity micelle sweeping by micellar electrokinetic chromatography

A novel online two-step pressure injection-assisted stacking preconcentration method, which involves sweeping and affinity micelles in micellar electrokinetic chromatography was developed to simultaneously measure various organic anions. The micellar solution was a mixed solution that contained 0.3 mM didodecyldimethylammonium bromide and 20 mM borax. After the micellar solution was injected for 60 s, the tested analytes prepared in 20 mM borax were introduced into the capillary for 150 s. The key experimental factors that influenced the separation and sensitivity were investigated and optimized, including the concentration and injection time of the micellar solution, the concentration of borax in the sample solution, the concentration of sodium dodecyl sulfate and borax in the background electrolyte (BGE), the content of acetonitrile in the BGE and the injection time of the sample solution. Compared with typical injection methods, this method achieved sensitivity enhancement factors ranging from 85 to 97 under optimized conditions. Good linearity for matrix-matched calibration was established for all analytes with R2 values of 0.9986-0.9996. The intraday (n = 6) and interday (n = 6) precisions of the method were less than 2.85% when expressed as relative standard deviations. When the method was applied to analyze rice and dried ginger samples, analyte recoveries ranged from 85.81% to 106.59%. Through sweeping and affinity micelles, stacking preconcentration method was successfully employed to analyze trace amounts of fenoprop and 2,4-dichlorophenoxyacetic acid in rice and dried ginger samples.

Strategies for capillary electrophoresis: Method development and validation for pharmaceutical and biological applications-Updated and completely revised edition

This review is in support of the development of selective, precise, fast, and validated capillary electrophoresis (CE) methods. It follows up a similar article from 1998, Wätzig H, Degenhardt M, Kunkel A. "Strategies for capillary electrophoresis: method development and validation for pharmaceutical and biological applications," pointing out which fundamentals are still valid and at the same time showing the enormous achievements in the last 25 years. The structures of both reviews are widely similar, in order to facilitate their simultaneous use. Focusing on pharmaceutical and biological applications, the successful use of CE is now demonstrated by more than 600 carefully selected references. Many of those are recent reviews; therefore, a significant overview about the field is provided. There are extra sections about sample pretreatment related to CE and microchip CE, and a completely revised section about method development for protein analytes and biomolecules in general. The general strategies for method development are summed up with regard to selectivity, efficiency, precision, analysis time, limit of detection, sample pretreatment requirements, and validation.

Progress in on-line, at-line, and in-line coupling of sample treatment with capillary and microchip electrophoresis over the past 10 years: A review

The review presents an evaluation of the development of on-line, at-line and in-line sample treatment coupled with capillary and microchip electrophoresis over the last 10 years. In the first part, it describes different types of flow-gating interfaces (FGI) such as cross-FGI, coaxial-FGI, sheet-flow-FGI, and air-assisted-FGI and their fabrication using molding into polydimethylsiloxane and commercially available fittings. The second part deals with the coupling of capillary and microchip electrophoresis with microdialysis, solid-phase, liquid-phase, and membrane based extraction techniques. It mainly focuses on modern techniques such as extraction across supported liquid membrane, electroextraction, single drop microextraction, head space microextraction, and microdialysis with high spatial and temporal resolution. Finally, the design of sequential electrophoretic analysers and fabrication of SPE microcartridges with monolithic and molecularly imprinted polymeric sorbents are discussed. Applications include the monitoring of metabolites, neurotransmitters, peptides and proteins in body fluids and tissues to study processes in living organisms, as well as the monitoring of nutrients, minerals and waste compounds in food, natural and wastewater.

Modular Engineering of a DNA Tetrahedron-Based Nanomachine for Ultrasensitive Detection of Intracellular Bioactive Small Molecules

Bioactive small molecules serve as invaluable biomarkers for recognizing modulated organismal metabolism in correlation with numerous diseases. Therefore, sensitive and specific molecular biosensing and imaging in vitro and in vivo are particularly critical for the diagnosis and treatment of a large group of diseases. Herein, a modular DNA tetrahedron-based nanomachine was engineered for the ultrasensitive detection of intracellular small molecules. The nanomachine was composed of three self-assembled modules: an aptamer for target recognition, an entropy-driven unit for signal reporting, and a tetrahedral oligonucleotide for the transportation of the cargo (e.g., the nanomachine and fluorescent markers). Adenosine triphosphate (ATP) was used as the molecular model. Once the target ATP bonded with the aptamer module, an initiator was released from the aptamer module to activate the entropy-driven module, ultimately activating the ATP-responsive signal output and subsequent signal amplification. The performance of the nanomachine was validated by delivering it to living cells with the aid of the tetrahedral module to demonstrate the possibility of executing intracellular ATP imaging. This innovative nanomachine displays a linear response to ATP in the 1 pM to 10 nM concentration range and demonstrates high sensitivity with a low detection limit of 0.40 pM. Remarkably, our nanomachine successfully executes endogenous ATP imaging and is able to distinguish tumor cells from normal ones based on the ATP level. Overall, the proposed strategy opens up a promising avenue for bioactive small molecule-based detection/diagnostic assays.

Diazo probe-based chemical isotope labeling assisted liquid chromatography-tandem mass spectrometry analysis for sensitive determination of amino acids in biofluids

Amino acids are important biomolecules and contribute to essential biological processes. Liquid chromatography tandem mass spectrometry (LC-MS) now is a powerful tool for the analysis of amino acid metabolites; however, the structural similarity and polarity of amino acids can lead to the poor chromatographic retention and low detection sensitivities. In this study, we used a pair of light and heavy isotopomers of diazo probes, d₀/d₅-2-(diazomethyl)-N-methyl-N-phenyl-benzamide (2-DMBA/d₅ -2-DMBA) to label amino acids. The paired MS probes of 2-DMBA and d₅ -2-DMBA carry diazo groups that can efficiently and specifically react with the carboxyl group on free amino acid metabolites under mild conditions. Benefiting from the transfer of the 2-DMBA/d₅ -2-DMBA to carboxyl group on amino acids, the ionization efficiencies of amino acids presented great enhancement during LC-MS analysis. The results suggested that the detection sensitivities of 17 amino acids increased by 9-133-fold upon 2-DMBA labeling, and the obtained limits of detection (LODs) of amino acids on-column ranged from 0.011 fmol-0.057 fmol. With the application of the developed method, we successfully achieved the sensitive and accurate detection of the 17 amino acids in microliter level of serum sample. Moreover, the contents of most amino acids were different in the serum from normal and B16F10-tumour mice, demonstrating that endogenous amino acids may play important roles in the regulation of tumors development. This developed method of chemical labeling of amino acids with diazo probes assisted LC-MS analysis provides a potentially valuable tool to investigate the relationships between amino acids metabolism and diseases.

Microdialysis as a tool for antibiotic assessment in patients with diabetic foot: a review

Diabetic foot is a serious late complication frequently caused by infection and ischaemia. Both require prompt and aggressive treatment to avoid lower limb amputation. The effectiveness of peripheral arterial disease therapy can be easily verified using triplex ultrasound, ankle-brachial/toe-brachial index examination, or transcutaneous oxygen pressure. However, the success of infection treatment is difficult to establish in patients with diabetic foot. Intravenous systemic antibiotics are recommended for the treatment of infectious complications in patients with moderate or serious stages of infection. Antibiotic therapy should be initiated promptly and aggressively to achieve sufficient serum and peripheral antibiotic concentrations. Antibiotic serum levels are easily evaluated by pharmacokinetic assessment. However, antibiotic concentrations in peripheral tissues, especially in diabetic foot, are not routinely detectable. This review describes microdialysis techniques that have shown promise in determining antibiotic levels in the surroundings of diabetic foot lesions.

Microfluidic systems in clinical diagnosis

The use of microfluidic devices is highly attractive in the field of biomedical and clinical assessments, as their portability and fast response time have become crucial in providing opportune therapeutic treatments to patients. The applications of microfluidics in clinical diagnosis and point-of-care devices are continuously growing. The present review article discusses three main fields where miniaturized devices are successfully employed in clinical applications. The quantification of ions, sugars, and small metabolites is examined considering the analysis of bodily fluids samples and the quantification of this type of analytes employing real-time wearable devices. The discussion covers the level of maturity that the devices have reached as well as cost-effectiveness. The analysis of proteins with clinical relevance is presented and organized by the function of the proteins. The last section covers devices that can perform single-cell metabolomic and proteomic assessments. Each section discusses several strategically selected recent reports on microfluidic devices successfully employed for clinical assessments, to provide the reader with a wide overview of the plethora of novel systems and microdevices developed in the last 5 years. In each section, the novel aspects and main contributions of each reviewed report are highlighted. Finally, the conclusions and future outlook section present a summary and speculate on the future direction of the field of miniaturized devices for clinical applications.

Overview of Biofluids and Flow Sensing Techniques Applied in Clinical Practice

This review summarizes the current knowledge on biofluids and the main flow sensing techniques applied in healthcare today. Since the very beginning of the history of medicine, one of the most important assets for evaluating various human diseases has been the analysis of the conditions of the biofluids within the human body. Hence, extensive research on sensors intended to evaluate the flow of many of these fluids in different tissues and organs has been published and, indeed, continues to be published very frequently. The purpose of this review is to provide researchers interested in venturing into biofluid flow sensing with a concise description of the physiological characteristics of the most important body fluids that are likely to be altered by diverse medical conditions. Similarly, a reported compilation of well-established sensors and techniques currently applied in healthcare regarding flow sensing is aimed at serving as a starting point for understanding the theoretical principles involved in the existing methodologies, allowing researchers to determine the most suitable approach to adopt according to their own objectives in this broad field.

Applications of capillary electrophoresis in the fields of environmental, pharmaceutical, clinical and food analysis (2019-2021)

So far, the potential of capillary electrophoresis (CE) in the application fields has been increasingly excavated due to the advantages of simple operation, short analysis time, high-resolution, less sample consumption and low cost. This review examines the implementations and advancements of CE in different application fields (environmental, pharmaceutical, clinical and food analysis) covering the literature from 2019 to 2021. In addition, ultrasmall sample injection volume (nanoliter range) and short optical path lead to relatively low concentration sensitivity of the most frequently used UV-absorption spectrophotometric detection, so the pretreatment technology being developed has been gradually utilized to overcome this problem. Despite the review is focused on the development of CE in the fields of environmental, pharmaceutical, clinical and food analysis, the new sample pretreatment techniques of microextraction and enrichment which fit excellently to CE in recent three years are also described briefly. This article is protected by copyright. All rights reserved.

Automated Sequential Injection-Capillary Electrophoresis for Dried Blood Spot Analysis: A Proof-of-Concept Study

A hyphenated analytical platform that enables fully automated analyses of dried blood spots (DBSs) is proposed by the at-line coupling of sequential injection (SI) to capillary electrophoresis (CE). The SI system, exploited herein for the first time for unattended DBS handling, serves as the "front end" mesofluidic platform for facilitating exhaustive elution of the entire DBS by flow programming. The DBS eluates are thus free from hematocrit and nonhomogeneity biases. The SI pump transfers the resulting DBS eluates into CE sample vials through an internal port of the CE instrument and homogenizes the eluates, whereupon the eluted blood compounds are automatically injected, separated, and quantified by the CE instrument. The SI and CE are commercially available off-the-shelf instruments and are interconnected through standard nuts, ferrules, and tubing without additional instrumental adjustments. They are controlled by dedicated software and are synchronized for a fully autonomous operation. The direct determination of endogenous (potassium and sodium) and exogenous (lithium as a model drug) inorganic cations in DBS samples has been used for the proof-of-concept demonstration. The hyphenated SI-CE platform provides excellent precision of the analytical method with relative standard deviation (RSD) values of peak areas below 1.5 and 3.5% for intraday and interday analyses, respectively, of the endogenous concentrations of the two inorganic cations. For the determination of lithium, calibration is linear in a typical clinical range of the drug (R² better than 0.9993 for 2-20 mg/L), RSD values of peak areas are below 4.5% (in the entire calibration range), the limit of detection (0.4 mg/L) and the limit of quantification (1.3 mg/L) are well below the drug's minimum therapeutic concentration (4 mg/L), and total analysis time is shorter than 5 min. The SI-CE platform reflects the actual trends in the automation of analytical methods, offers rapid and highly flexible DBS elution/analysis processes, and might thus provide a general solution to modern clinical analysis as it can be applied to a broad range of analytes and dried biological materials.

Pseudophase microextraction for in-line sample concentration in micellar electrokinetic chromatography

Pseudophase microextraction (PPME) as a simple in-line sample concentration technique in micellar electrokinetic chromatography (MEKC) is presented. In contrast to popular electric-field driven stacking techniques in MEKC such as sweeping, PPME is pressure-driven. The technique afforded up to 403-2968x improvements in peak heights for fenoprop, dichlorprop, 1- and 2-naphthol compared to typical injection. Under the same MEKC conditions, the improvements in PPME were up to 23-59x better compared to sweeping. Briefly in PPME, the entire capillary was loaded (up to 20 capillary volumes) with the sample prepared in a dilute solution of cetyltrimethylammonium bromide ([CTAB] > critical surface aggregation concentration). The CTAB formed aggregates at the inner capillary walls and these aggregates acted as a stationary chromatographic pseudophase. After clean-up via flushing the capillary with purified water, the MEKC background solution (BGS) with sodium dodecyl sulfate was then introduced by pressure from the outlet end to elute the retained analytes. The analytes concentrate at front of the BGS and the front was moved to the inlet end of the capillary prior to MEKC. Optimization strategies and current limitations in PPME-MEKC are described. The linear ranges using a 4 capillary volume sample load obtained for fenoprop, dichlorprop, 1- and 2-naphthol were between 1 and 160 ng/mL (r²s ≥ 0.996), LOQs = 1-2.5 ng/mL and repeatability %RSDs (n = 6) were ≤5% (intra-day) and ≤7% (inter-day) (using low analyte concentrations 1-5x LOQ). PPME-MEKC with simple dilution of fortified real samples (no off-line sample concentration) was also able to detect low levels of dichlorprop (10 ng/mL, limit set in Australia) and 1- and 2-naphthol (7.5-15 ng/mL) in a drinking water and natural water sample, respectively (% recovery = 84-108%). The concept of PPME may find use in other modes of capillary electrophoresis and other nano-microscale separations.

Recent developments in capillary and microchip electroseparations of peptides (2019-mid 2021)

The review provides a comprehensive overview of developments and applications of high performance capillary and microchip electroseparation methods (zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography) for analysis, microscale isolation, and physicochemical characterization of peptides from 2019 up to approximately the middle of 2021. Advances in the investigation of electromigration properties of peptides and in the methodology of their analysis, such as sample preparation, sorption suppression, EOF control, and detection, are presented. New developments in the individual CE and CEC methods are demonstrated and several types of their applications are shown. They include qualitative and quantitative analysis, determination in complex biomatrices, monitoring of chemical and enzymatic reactions and physicochemical changes, amino acid, sequence, and chiral analyses, and peptide mapping of proteins. In addition, micropreparative separations and determination of significant physicochemical parameters of peptides by CE and CEC methods are described.

Amniotic fluid and urine metabolomic alterations associated with pregnant women with Down syndrome fetuses

BACKGROUND

Down syndrome (DS) is a chromosomal disorder caused by a third copy of all or part of chromosome 21. Clinical observations and preclinical studies both suggest that DS may be associated with significant metabolic and bioenergetic alterations. But the metabolic alterations in pregnant women carrying DS fetuses still remains unclear. In this study, we investigated the characteristic metabolomics and lipidomics changes during fetal development of DS.

METHODS

The AF and random urine specimens were selected from 20 pregnant women carrying DS fetuses and 20 pregnant women carrying healthy fetuses. The diagnosis of DS was screened according to chromosome karyotype analysis, and untargeted metabolomic and lipidomic analyses were performed.

RESULTS

Through the analyses of AF, 308 differential metabolites were selected between DS and controls. The metabolites with significant changes mainly involved lipid molecules, organic acids, nucleotides and carbon. Further analysis of lipidomics showed 64 differential metabolites, mainly involving glycerides, sphingolipids and glycerolipids. As for urine metabolomic and lipidomic analyses, there existed consistent metabolites with AF, but the number was much less.

CONCLUSIONS

Compared with the controls, carbon metabolism, amino acid metabolism, glyceride metabolism, sphingolipid metabolism and glycerophospholipid metabolism were significantly changed in DS cases. In addition, characterized biomarkers in AF and urine were screened for DS diagnosis, and these metabolites were mainly involved in energy metabolism and liver dysfunction. This finding may help improve the efficiency of prenatal screening for DS.

Capillary Electrophoresis Instruments for Medical Applications and Falsified Drug Analysis/Quality Control in Developing Countries

The implementation of integrated analytical techniques to meet stringent requirements in the life sciences requires a well-developed analytical capacity. New technology in analytical equipment for the analysis of large and small molecules is continuously being developed. However, developing countries frequently struggle to keep pace with technological advancements. Hence, it is of utmost importance to better invest in optimizing existing and proven methodologies to tackle life-saving challenges in developing countries. In this regard, capillary electrophoresis is a promising candidate for solving multiple analytical problems compared to its chromatographic and spectroscopic counterparts due to its fast analytical response time and notable cost efficiency. In the following, we summarize various issues and opportunities for capillary electrophoresis to be the technique of choice for the unresolved bottlenecks in analytical equipment in developing countries for drug quality control. This perspective demonstrates that the ongoing quest for the design of new, impactful analytical techniques is a dynamic and rapidly developing research area and mentions some directions and opportunities that have arisen during the recent pandemic.

How does DNA 'meet' capillary-based microsystems?

DNA possesses various chemical and physical properties which make it important in biological analysis. The opportunity for DNA to 'meet' capillary-based microsystems is rapidly increasing owing to the expanding development of miniaturization. Novel capillary-based methods can provide favourable platforms for DNA-ligand interaction assay, DNA translocation study, DNA separation, DNA aptamer selection, DNA amplification assay, and DNA digestion. Meanwhile, DNA exhibits great potential in the fabrication of new capillary-based biosensors and enzymatic bioreactors. Moreover, DNA has received significant research interest in improving capillary electrophoresis (CE) performance. We focus on highlighting the advantages of combining DNA and capillary-based microsystems. The general trend presented in this review suggests that the 'meeting' has offered a stepping stone for the application of DNA and capillary-based microsystems in the field of analytical chemistry.

Development of a background electrolyte for the determination of inorganic cations in high ionic strength samples by capillary electrophoresis with indirect UV-absorption detection

In this study, a background electrolyte capable to separate and quantify inorganic cations in high ionic strength samples by UV-absorption indirect detection was designed. In this regard, the four most abundant monovalent and divalent cations in earth crust (K⁺, Na⁺, Ca⁺², Mg⁺²) were selected as model compounds. A group of small carboxylic acids and, several toluidines and pyridines were evaluated as mild strength complexing agents and chromophoric probes, respectively. The optimized background electrolyte was composed of 200 mM 2,4,6-trimethylpyridine as the chromophoric probe, 250 mM lactic acid as the weak complexing agent and pH buffering reagent (adjusted to pH 4.5), and 5% v/v methanol as organic solvent modifier. Based on a minimum number of components, it provided outstanding separation performance in less than 4 min in a wide linear dynamic range (10 - 2500 µg·mL^-1). Performances were contrasted against a reference method based on conductometric detection. Furthermore, studies of separation efficiency and peak shape were carried out at different analyte concentrations in high electric conductivity solutions. The herein developed method demonstrated exceptional features in terms of limits of detection (~10 µg·mL^-1), resolution, speed of analysis, sensitivity and peak capacity in high electric conductivity samples. Moreover, the method was successfully applied to high ionic strength samples such as rock digest, sea water, soy sauce and isotonic drinks.

Capillary electrophoretic method for Staphylococcus aureus detection by using a novel antimicrobial peptide

A novel peptide containing antimicrobial sequence and gelatinase cleavage sites was designed for Staphylococcus aureus detection. Since Staphylococcus aureus could secrete gelatinase, the fluorescein labeled peptide GKRWWKWWRRPLGVRGC could be recognized and cleaved. The obtained products were able to be analyzed by capillary electrophoresis with fluorescence detection. To explore the effect of Staphylococcus aureus concentration on enzyme digestion ability of peptide, Staphylococcus aureus with different concentrations were incubated with the peptide. Results indicated that capillary electrophoretic method was efficient for determining Staphylococcus aureus content. Compared with traditional approaches for Staphylococcus aureus detection, capillary electrophoresis possessed higher efficiency, enhanced sensitivity, and low sample consumption. Moreover, the proposed peptide also presented desirable antimicrobial activity. It suggested that the novel antimicrobial peptide used in this research opens a new path of detecting Staphylococcus aureus by capillary electrophoretic method.

The Double Face of Ketamine-The Possibility of Its Identification in Blood and Beverages

The purpose of this study was to develop and validate a high-sensitivity methodology for identifying one of the most used drugs—ketamine. Ketamine is used medicinally to treat depression, alcoholism, and heroin addiction. Moreover, ketamine is the main ingredient used in so-called “date-rape” pills (DRP). This study presents a novel methodology for the simultaneous determination of ketamine based on the Dried Blood Spot (DBS) method, in combination with capillary electrophoresis coupled with a mass spectrometer (CE-TOF-MS). Then, 6-mm circles were punched out from DBS collected on Whatman DMPK-C paper and extracted using microwave-assisted extraction (MAE). The assay was linear in the range of 25–300 ng/mL. Values of limits of detection (LOD = 6.0 ng/mL) and quantification (LOQ = 19.8 ng/mL) were determined based on the signal to noise ratio. Intra-day precision at each determined concentration level was in the range of 6.1–11.1%, and inter-day between 7.9–13.1%. The obtained precision was under 15.0% (for medium and high concentrations) and lower than 20.0% (for low concentrations), which are in accordance with acceptance criteria. Therefore, the DBS/MAE/CE-TOF-MS method was successfully checked for analysis of ketamine in matrices other than blood, i.e., rose wine and orange juice. Moreover, it is possible to identify ketamine in the presence of flunitrazepam, which is the other most popular ingredient used in DRP. Based on this information, the selectivity of the proposed methodology for identifying ketamine in the presence of other components of rape pills was checked.

Dried Blood Spot Self-Sampling with Automated Capillary Electrophoresis Processing for Clinical Analysis

A simple and convenient concept of blood sampling followed by a fully automated analysis is presented. A disposable sampling kit is used for accurate self-sampling of capillary blood from a finger prick. A high-throughput blood sampling is thus enabled, which is essential in many clinical assays and considerably improves life quality and comfort of involved subjects. The collected blood samples are mailed to a laboratory for a fully automated dried blood spot (DBS) processing and analysis, which are performed with a commercial capillary electrophoresis instrument. Quantitative results are obtained within 20 min from the DBS delivery to the laboratory. The presented concept is exemplified by the determination of warfarin blood concentrations and demonstrates excellent analytical performance. Moreover, this concept is generally applicable to a wide range of endogenous and exogenous blood compounds and represents a novel and attractive analytical tool for personalized health monitoring.

Application of Multiplexed Aptasensors in Food Contaminants Detection

The existence of contaminants in food poses a serious threat to human health. In recent years, aptamer sensors (aptasensors) have been developed rapidly for the detection of food contaminants because of their high specificity, design flexibility, and high efficiency. However, the development of high-throughput, highly sensitive, on-site, and cost-effective methods for simultaneous detection of food contaminants is still restricted due to multiple signal overlap or mutual interference and cross-reaction between different analytes with similar molecular structures. To overcome these problems, this Review summarizes some effective strategies from the articles published in recent years about multiplexed aptasensors for the simultaneous detection of food contaminants. This work focuses on the application of multiplexed aptasensors to simultaneously detect antibiotics, pathogens, and mycotoxins in food. These aptasensors mainly contain fluorescent aptasensors, electrochemical aptasensors, surface-enhanced Raman scattering-based aptasensors, microfluidic chip aptasensors, and paper-based multiplexed aptasensors. In addition, this Review also covers the application of nucleic acid cycle amplification and nanomaterial amplification strategies to improve the detection sensitivity. Finally, the limitations and challenges in the design of multiplexed aptasensor are also taken into account.

Biological applications of microchip electrophoresis with amperometric detection: in vivo monitoring and cell analysis

Microchip electrophoresis with amperometric detection (ME-EC) is a useful tool for the determination of redox active compounds in complex biological samples. In this review, a brief background on the principles of ME-EC is provided, including substrate types, electrode materials, and electrode configurations. Several different detection approaches are described, including dual-channel systems for dual-electrode detection and electrochemistry coupled with fluorescence and chemiluminescence. The application of ME-EC to the determination of catecholamines, adenosine and its metabolites, and reactive nitrogen and oxygen species in microdialysis samples and cell lysates is also detailed. Lastly, approaches for coupling of ME-EC with microdialysis sampling to create separation-based sensors that can be used for near real-time monitoring of drug metabolism and neurotransmitters in freely roaming animals are provided. Graphical abstract.

Development of a new method for drug detection based on a combination of the dried blood spot method and capillary electrophoresis

The aim of this study was to develop a new approach to sample preparation of biological material based on a combination of the Dried Blood Spot (DBS) method and capillary electrophoresis coupled with mass spectrometry (CE-MS) for the analysis of blood samples collected in vivo or post-mortem. The proposed approach allowed the identification of typical drugs from different groups, such as tricyclic antidepressants (amitriptyline, imipramine), selective serotonin reuptake inhibitors (citalopram), benzodiazepines (tetrazepam) and hypnotics (zolpidem). In this study, a blood sample was spotted on FTA DMPK C cards, then dried, and 6-mm discs were cut out. The sample preparation procedure involved microwave-assisted extraction (MAE). Various extraction agents, temperatures and durations of extraction were examined in order to achieve the highest efficiency of the process. The method was subjected to a validation procedure. Limits of detection (LOD = 1.76 - 14.7 ng/mL) and quantification (LOQ = 5.25 - 49.0 ng/mL), inter- (CV = 1.31 - 9.43%) and intra- (CV = 3.26 - 18.52%) day precision of the determinations, recovery (RE = 85.0-105.4%) and matrix effect on ionization of analytes (ME = 98.6-105.5%) were determined. Furthermore, the developed DBS/MAE/CM-MS method was selective and analytes present in the blood applied on DBS cards were found to be stable after 7 and after 14 days. Moreover, the developed method was successfully applied to the analysis of both post-mortem samples and blood samples taken from patients treated with the analyzed drugs.

Direct identification of forensic body fluids by MALDI-MS

The rapid identification of human body fluids is meaningful for forensic casework.