Molecularly imprinted photoelectrochemical sensor for carcinoembryonic antigen based on polymerized ionic liquid hydrogel and hollow gold nanoballs/MoSe2 nanosheets

Large-area grown ultrathin molybdenum oxides for label-free sensitive biomarker detection

The rise of two-dimensional (2D) materials has provided a confined geometry and yielded methods for guiding electrons at the nanoscale level. 2D material-enabled electronic devices can interact and transduce the subtle charge perturbation and permit significant advancement in molecule discrimination technology with high accuracy, sensitivity, and specificity, leaving a significant impact on disease diagnosis and health monitoring. However, high-performance biosensors with scalable fabrication ability and simple protocols have yet to be fully realized due to the challenges in wafer-scale 2D film synthesis and integration with electronics. Here, we propose a molybdenum oxide (MoOx)-interdigitated electrode (IDE)-based label-free biosensing chip, which stands out for its wafer-scale dimension, tunability, ease of integration and compatibility with the complementary metal-oxide-semiconductor (CMOS) fabrication. The device surface is biofunctionalized with monoclonal anti-carcinoembryonic antigen antibodies (anti-CEA) via the linkage agent (3-aminopropyl)triethoxysilane (APTES) for carcinoembryonic antigen (CEA) detection and is characterized step-by-step to reveal the working mechanism. A wide range and real-time response of the CEA concentration from 0.1 to 100 ng mL-1 and a low limit of detection (LOD) of 0.015 ng mL-1 were achieved, meeting the clinical requirements for cancer diagnosis and prognosis in serum. The MoOx-IDE biosensor also demonstrates strong surface affinity towards molecules and high selectivity using L-cysteine (L-Cys), glycine (Gly), glucose (Glu), bovine serum albumin (BSA), and immunoglobulin G (IgG). This study showcases a simple, scalable, and low-cost strategy to create a nanoelectronic biosensing platform to achieve high-performance cancer biomarker discrimination capabilities.

Polymerized and Colloidal Ionic Liquids─Syntheses and Applications

The breadth and importance of polymerized ionic liquids (PILs) are steadily expanding, and this review updates advances and trends in syntheses, properties, and applications over the past five to six years. We begin with an historical overview of the genesis and growth of the PIL field as a subset of materials science. The genesis of ionic liquids (ILs) over nano to meso length-scales exhibiting 0D, 1D, 2D, and 3D topologies defines colloidal ionic liquids, CILs, which compose a subclass of PILs and provide a synthetic bridge between IL monomers (ILMs) and micro to macro-scale PIL materials. The second focus of this review addresses design and syntheses of ILMs and their polymerization reactions to yield PILs and PIL-based materials. A burgeoning diversity of ILMs reflects increasing use of nonimidazolium nuclei and an expanding use of step-growth chemistries in synthesizing PIL materials. Radical chain polymerization remains a primary method of making PILs and reflects an increasing use of controlled polymerization methods. Step-growth chemistries used in creating some CILs utilize extensive cross-linking. This cross-linking is enabled by incorporating reactive functionalities in CILs and PILs, and some of these CILs and PILs may be viewed as exotic cross-linking agents. The third part of this update focuses upon some advances in key properties, including molecular weight, thermal properties, rheology, ion transport, self-healing, and stimuli-responsiveness. Glass transitions, critical solution temperatures, and liquidity are key thermal properties that tie to PIL rheology and viscoelasticity. These properties in turn modulate mechanical properties and ion transport, which are foundational in increasing applications of PILs. Cross-linking in gelation and ionogels and reversible step-growth chemistries are essential for self-healing PILs. Stimuli-responsiveness distinguishes PILs from many other classes of polymers, and it emphasizes the importance of segmentally controlling and tuning solvation in CILs and PILs. The fourth part of this review addresses development of applications, and the diverse scope of such applications supports the increasing importance of PILs in materials science. Adhesion applications are supported by ionogel properties, especially cross-linking and solvation tunable interactions with adjacent phases. Antimicrobial and antifouling applications are consequences of the cationic nature of PILs. Similarly, emulsion and dispersion applications rely on tunable solvation of functional groups and on how such groups interact with continuous phases and substrates. Catalysis is another significant application, and this is an historical tie between ILs and PILs. This component also provides a connection to diverse and porous carbon phases templated by PILs that are catalysts or serve as supports for catalysts. Devices, including sensors and actuators, also rely on solvation tuning and stimuli-responsiveness that include photo and electrochemical stimuli. We conclude our view of applications with 3D printing. The largest components of these applications are energy related and include developments for supercapacitors, batteries, fuel cells, and solar cells. We conclude with our vision of how PIL development will evolve over the next decade.

The sensor applications for prostate and lung cancer biomarkers in terms of electrochemical analysis

Prostate and lung cancers are the most common types of cancer and affect a large part of the population around the world, causing deaths. Therefore, the rapid identification of cancer can profoundly impact reducing cancer-related death rates and protecting human lives. Significant resources have been dedicated to investigating new methods for early disease detection. Cancer biomarkers encompass various biochemical entities, including nucleic acids, proteins, sugars, small metabolites, cytogenetic and cytokinetic parameters, and whole tumor cells in bodily fluids. These tools can be utilized for various purposes, such as risk assessment, diagnosis, prognosis, treatment efficacy, toxicity evaluation, and predicting a return. Due to these versatile and critical purposes, there are widespread studies on the development of new, sensitive, and selective approaches for the determination of cancer biomarkers. This review illustrates the significant lung and prostate cancer biomarkers and their determination utilizing electrochemical sensors, which have the advantage of improved sensitivity, low cost, and simple analysis. Additionally, approaches such as improving sensitivity with nanomaterials and ensuring selectivity with MIPs are used to increase the performance of the sensor. This review aims to overview the most recent electrochemical biosensor applications for determining vital biomarkers of prostate and lung cancers in terms of nanobiosensors and molecularly imprinted polymer (MIP)-based biosensors.

Hydrogels for Chemical Sensing and Biosensing

The development and synthesis of hydrogels for chemical and biosensing are of great value. Hydrogels can be tailored to its own physical structure, chemical properties, biocompatibility, and sensitivity to external stimuli when being used in a specific environment. Herein, hydrogels and their applications in chemical and biosensing are mainly covered. In particular, it is focused on the manner in which hydrogels serve as sensing materials to a specific analyte. Different types of responsive hydrogels are hence introduced and summarized. Researchers can modify different chemical groups on the skeleton of the hydrogels, which make them as good chemical and biosensing materials. Hydrogels have great application potential for chemical and biosensing in the biomedical field and some emerging fields, such as wearable devices.

Molecularly Imprinted Polymer-Based Sensors Integrated with Transition Metal Dichalcogenides (TMDs) and MXenes: A Review

Molecularly imprinted polymer (MIP)-based electrochemical sensors have been extensively researched due to their higher sensitivity, quick response, and operational ease. To develop more advanced sensing devices with enhanced properties, MIPs have been integrated with two-dimensional (2D) layered materials such as transition metal dichalcogenides (TMDs) and MXenes. These 2D materials have unique electronic properties and an extended surface area, making them promising sensing materials that can improve the performance of MIPs. In this review article, we describe the methods used for the synthesis of TMDs and MXenes integrated MIP-based electrochemical sensors. Furthermore, we have provided a critical review of a wide range of analytes determined through the application of these electrochemical sensors. We also go over the influence of TMDs and MXenes on the binding kinetics and adsorption capacity which has enhanced binding recognition and sensing abilities. The combination of TMDs and MXenes with MIPs shows promising synergy in the development of highly efficient recognition materials. In the future, these sensors could be explored for a wider range of applications in environmental remediation, drug delivery, energy storage, and more. Finally, we address the challenges and future perspectives of using TMDs and MXenes integrated MIPs. We conclude with a focus on future development and the scope of integrating these materials in sensing technology.

Ionic liquids revolutionizing biomedicine: recent advances and emerging opportunities

Ionic liquids (ILs), due to their inherent structural tunability, outstanding miscibility behavior, and excellent electrochemical properties, have attracted significant research attention in the biomedical field. As the application of ILs in biomedicine is a rapidly emerging field, there is still a need for systematic analyses and summaries to further advance their development. This review presents a comprehensive survey on the utilization of ILs in the biomedical field. It specifically emphasizes the diverse structures and properties of ILs with their relevance in various biomedical applications. Subsequently, we summarize the mechanisms of ILs as potential drug candidates, exploring their effects on various organisms ranging from cell membranes to organelles, proteins, and nucleic acids. Furthermore, the application of ILs as extractants and catalysts in pharmaceutical engineering is introduced. In addition, we thoroughly review and analyze the applications of ILs in disease diagnosis and delivery systems. By offering an extensive analysis of recent research, our objective is to inspire new ideas and pathways for the design of innovative biomedical technologies based on ILs.

Sensitive photoelectrochemical immunosensor for carcinoembryonic antigen detection based on copolymer of thiophene and thiophene-3-acetic acid modified phosphate-doped Bi2WO6

In this study, PO₄^3- doped Bi₂WO₆ (BWO-PO) was prepared by hydrothermal method, and then copolymer of thiophene and thiophene-3-acetic acid (P(Th-T3A)) was chemically deposited on the BWO-PO surface. The introduction of PO₄^3- created point defects, greatly improving the photoelectric catalytic performance of Bi₂WO₆; the copolymer semiconductor could form heterojunction with Bi₂WO₆ to promote the separation of photo-generated carriers, due to its proper band gap. Furthermore, the copolymer could enhance the light absorption ability and photo-electronic conversion efficiency. Hence, the composite had good photoelectrochemical properties. When it was combined with carcinoembryonic antibody through the interaction of -COOH groups of the copolymer and the end groups of antibody for constructing ITO-based PEC immunosensor, the resulting sensor exhibited superb response to carcinoembryonic antigen (CEA), with a wide linear range of 1 pg/mL-20 ng/mL, and a relatively low detection limit of 0.41 pg/mL. It also showed high anti-interference ability, stability, and simplicity. The sensor has been successfully applied to monitor the concentration of CEA in serum. The sensing strategy can also be applied to the detection of other markers by changing the recognition elements, hence it has good application potential.

Ultrathin MXene nanosheet-based TiO2/CdS heterostructure as a photoelectrochemical sensor for detection of CEA in human serum samples

To develop highly accurate and ultrasensitive strategies is of great importance for the clinical measurement, in particular, the detection of cancer biomarkers. Herein, we synthesized an ultrasensitive TiO₂/MXene/CdS QDs (TiO₂/MX/CdS) heterostructure as a photoelectrochemical immunosensor, which favors energy levels matching and fast electron transfer from CdS to TiO₂ in the help of ultrathin MXene nanosheet. Dramatic photocurrent quenching can be observed upon incubation of the TiO₂/MX/CdS electrode by Cu²⁺ solution from 96-well microplate, which caused by the formation of CuS and subsequent Cu_xS (x = 1, 2), reducing the absorption of light and boosting the electron-hole recombination upon irradiation. As a result, the as-prepared biosensor demonstrates a linearly increased photocurrent quenching percentage (Q%) value with CEA concentration ranging from 1 fg/mL to 10 ng/mL, as well as a low detection limit of 0.24 fg/mL. Benefit from its excellent stability, high selectivity and good reproducibility of as-prepared PEC immunosensor, we believe that this proposed strategy might provide new opportunities for clinical diagnosis of CEA and other tumor markers.

PB@PDA nanocomposites as nanolabels and signal reporters for separate-type cathodic photoelectrochemical immunosensors in the detection of carcinoembryonic antigens

Photoelectrochemical (PEC) immunoassays exhibiting high sensitivity and decent operability have considerable potential in areas such as cancer diagnostics. In particular, cathodic PEC configurations can prevent interference from reductive substances, which can occur in biological samples; however, challenges remain in terms of sensitivity and operability. In this study, separate-type PEC immunoassays were developed for carcinoembryonic antigen (CEA) by combining microplate-based immune recognition and off-on cathodic PEC detection. Polydopamine (PDA)-coated Prussian blue (PB) nanoparticles (PB@PDA NPs) were used as signal tags to label the detection antibody. The PB NPs and PDA captured on the microplates both disassembled under strongly alkaline conditions to generate redox-active electron acceptors. The disassembled products were quantitatively transferred to PEC detection cells and synergistically enhanced the PEC current with microstructured BiOI, which operated as a cathodic semiconductor electrode. As proof of principle, carcinoembryonic antigen (CEA) was applied to elucidate the potential application of PEC immunoassay in clinical diagnosis, and the obtained linear range of the sensor was 0.001-100 ng mL^-1 with the detection limit of 54.9 fg mL^-1 (S/N = 3). The proposed separate-type off-on PEC strategy showed high sensitivity and decent operability for CEA detection, indicating its potential for the identification of other tumor markers.

Cuprous oxide coated silver/graphitic carbon nitride/cadmium sulfide nanocomposite heterostructure: Specific recognition of carcinoembryonic antigen through sandwich-type mechanism

The development of the effective diagnostic method for the determination of cancer biomarkers is one of the most promising strategies for early clinical diagnosis of cancer. Here, based on the preparation of heterogeneous cuprous oxide coated silver (Ag@Cu₂O) nanocomposites/graphitic carbon nitride (g-C₃N₄)/cadmium sulfide (CdS) nanoarrays structure, a highly sensitive photoelectrochemical (PEC) biosensor for the examination of carcinoembryonic antigen (CEA) has been constructed successfully. The combination of photoactive semiconductor materials g-C₃N₄ and CdS increases the electron transfer rate between them and enhances their photocurrent response, thus greatly increasing the concentration detection range. At the same time, the specific recognition between antigen and antibody is used to form a sandwich structure secondary antibody (Ab₂)/CEA/antibody (Ab₁). And because Ag@Cu₂O has the function of absorbing light and consuming electron donor. Therefore, the successful measurement of CEA was achieved by labeling Ag@Cu₂O on Ab₂ and finally immobilizing it on the sensor to correlate the current reduction with the CEA concentration. The sandwich PEC biosensor proposed by this signal amplification strategy under optimal conditions has good analytical performance for CEA, with a wide linear detection range (from 10^-5 to 1 ng/mL) and a low detection limit of 0.0011 pg/mL. The PEC biosensor constructed by this method showed high sensitivity, excellent anti-interference ability, favourable repeatability, and good stability.

Nano-Scaled Materials and Polymer Integration in Biosensing Tools

The evolution of biosensors and diagnostic devices has been thriving in its ability to provide reliable tools with simplified operation steps. These evolutions have paved the way for further advances in sensing materials, strategies, and device structures. Polymeric composite materials can be formed into nanostructures and networks of different types, including hydrogels, vesicles, dendrimers, molecularly imprinted polymers (MIP), etc. Due to their biocompatibility, flexibility, and low prices, they are promising tools for future lab-on-chip devices as both manufacturing materials and immobilization surfaces. Polymers can also allow the construction of scaffold materials and 3D structures that further elevate the sensing capabilities of traditional 2D biosensors. This review discusses the latest developments in nano-scaled materials and synthesis techniques for polymer structures and their integration into sensing applications by highlighting their various structural advantages in producing highly sensitive tools that rival bench-top instruments. The developments in material design open a new door for decentralized medicine and public protection that allows effective onsite and point-of-care diagnostics.

Electrochemistry/Photoelectrochemistry-Based Immunosensing and Aptasensing of Carcinoembryonic Antigen

Recently, electrochemistry- and photoelectrochemistry-based biosensors have been regarded as powerful tools for trace monitoring of carcinoembryonic antigen (CEA) due to the fact of their intrinsic advantages (e.g., high sensitivity, excellent selectivity, small background, and low cost), which play an important role in early cancer screening and diagnosis and benefit people's increasing demands for medical and health services. Thus, this mini-review will introduce the current trends in electrochemical and photoelectrochemical biosensors for CEA assay and classify them into two main categories according to the interactions between target and biorecognition elements: immunosensors and aptasensors. Some recent illustrative examples are summarized for interested readers, accompanied by simple descriptions of the related signaling strategies, advanced materials, and detection modes. Finally, the development prospects and challenges of future electrochemical and photoelectrochemical biosensors are considered.

Sandwich electrochemical carcinoembryonic antigen aptasensor based on signal amplification of polydopamine functionalized graphene conjugate Pd-Pt nanodendrites

Carcinoembryonic antigen (CEA) is considered as a disease biomarker, which is related to various cancers and tumors in the human bodies. Sensitive detection of CEA is significant for clinical diagnosis and treatment. Herein, we proposed an electrochemical aptasensor for CEA detection based on the amplification driven by polydopamine functional graphene and Pd-Pt nanodendrites (PDA@Gr/Pd-PtNDs), conjugated hemin/G-quadruplex (hemin/G4), which possess mimicking peroxidases activity. Firstly, PDA@Gr was modified on the electrode surface for fixing CEA aptamer 1 (Apt1). Then, PDA@Gr/Pd-PtNDs with large surface area served as matrix for immobilization of hemin/G4 to obtain the secondary aptamer. In virtue of the sandwich-type specific reaction between CEA and the corresponding aptamers, the second aptamer was captured on the sensing interface, which can catalyze the oxidation of signal probe hydroquinone (HQ) with H₂O₂ and amplify current signal. Furthermore, the electrochemical signals of HQ were proportional with CEA concentrations. Under the optimal conditions, a dynamic response range from 50 pg/mL to 1.0 μg/mL and a detection limit of 6.3 pg/mL for CEA were obtained. Moreover, the proposed strategy represented satisfactory sensitivity and stability, and showed a good precision in real samples application.

Molecularly imprinted photoelectrochemical sensor for detecting tetrabromobisphenol A in indoor dust and water

The gradual emissions of tetrabromobisphenol A (TBBPA) from the primitive recycling of E-waste create human health threats, which urgently require to develop an efficient, rapid yet simple detection method. The present study conducts a highly sensitive molecularly imprinted photoelectrochemical sensor (MIPES) containing molecularly imprinted (MI)-TiO₂, Au, and reduced graphene oxide for the trace detection of TBBPA in indoor dust and surface water from an E-waste recycling area. The photocurrent response is used to evaluate the sensing performance of the MIPES toward TBBPA detection. The working potential for amperometry is 0.48 V. The wavelength range for photoelectrochemical detection is 320-780 nm. The sensor shows a detection range of 1.68 to 100 nM with a low limit of detection of 0.51 nM (LOD = 3 s_b/S) and a limit of quantification of 1.68 nM (LOQ = 3.3 LOD). In addition, the MIPES sensor exhibits rapid, excellent reproducibility, selectivity, and long-term stability toward TBBPA detection. The relative standard deviation of three measurements for real samples is less than 7.0%, and the recovery range is 90.0-115%. The surface of molecular imprinting contributes to the high charge separation and sensing photocurrent response of TBBPA, which is confirmed by single-particle photoluminescence spectroscopy. The present study provides a new facile sensor with highly sensitive yet rapid response to detect environmental pollutants in E-waste by using the MIPES.

Enhanced photoactivity of ZnPc@WS2 heterojunction by CuBi2O4 and its application for photoelectrochemical detection of 5-formyl-2'-deoxycytidine

The endogenous epigenetic marker 5-formylcytosine (5 fC) is introduced by 5-methylcytosine (5 mC) oxidation under action of enzyme oxidation, and plays an important role in many life activities. Since the content of 5 fC in mammalian tissues and cells is very low, it is necessary to exploit a sensitive and specific detection method to further understand the function of 5 fC. In this work, a sensitively and selectively photoelectrochemical (PEC) biosensor was developed for 5-formyl-2'-deoxycytidine (5fdC) detection. CuBi₂O₄/ZnPc@WS₂ was used as photoactive material, where the formed ternary heterojunction structure greatly enhanced the PEC response and increased the detection sensitivity. Positively charged polyethyleneimine (PEI) was employed as 5fdC recognition and capture unit, where the amine group on PEI specifically reacted with aldehyde group of 5fdC to form stable amide bond. 4-Carboxyphenylboronic acid (4-CPBA) was adopted as crosslinker for 5fdC and amino functionalized CuBi₂O₄ based on the covalent interaction between 1,3-diol bond on 5fdC and boric acid structure on 4-CPBA, and the covalent interaction between -COOH on 4-CPBA and -NH₂ on amino functionalized CuBi₂O₄. On the basis of the positive synergistic effect of ZnPc and CuBi₂O₄ on improving the photoelectric performance of WS₂, the separation of photo-generated electron-hole pairs in semiconductors were promoted, and the examination range was expanded from 0.1 to 500 nM, and the detection limit was 0.0483 nM (3σ). Based on the unique covalent reaction between -NH₂ and -CHO, the PEC biosensor has excellent detection sensitivity, and can even separate 5fdC from 5-methylcytosine deoxyribonucleoside and 5-hydroxymethylcytosine deoxyribonucleoside. The effect of antibiotics and heavy metals on the 5fdC content in wheat tissue genome has also been further investigated using this sensor.

Nanostructure-based photoelectrochemical sensing platforms for biomedical applications

As a newly developed and powerful analytical method, the use of photoelectrochemical (PEC) biosensors opens up new opportunities to provide wide applications in the early diagnosis of diseases, environmental monitoring and food safety detection. The properties of diverse photoactive materials are one of the essential factors, which can greatly impact the PEC performance. The continuous development of nanotechnology has injected new vitality into the field of PEC biosensors. In many studies, much effort on PEC sensing with semiconductor materials is highlighted. Thus, we propose a systematic introduction to the recent progress in nanostructure-based PEC biosensors to exploit more promising materials and advanced PEC technologies. This review briefly evaluates the several advanced photoactive nanomaterials in the PEC field with an emphasis on the charge separation and transfer mechanism over the past few years. In addition, we introduce the application and research progress of PEC sensors from the perspective of basic principles, and give a brief overview of the main advances in the versatile sensing pattern of nanostructure-based PEC platforms. This last section covers the aspects of future prospects and challenges in the nanostructure-based PEC analysis field.

A label-free photoelectrochemical immunosensor for carcinoembryonic antigen detection based on a g-C3N4/CdSe nanocomposite

Herein, a label-free photoelectrochemical immunosensor based on a g-C3N4/CdSe nanocomposite was established and applied to detect carcinoembryonic antigen (CEA). The prepared nanocomposite materials were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), ultraviolet-visible absorption spectroscopy (UV-vis), X-ray photoelectron spectroscopy (XPS), fourier transform infrared spectrometer (FT-IR) and photoluminescence spectroscopy (PL). The results indicate that g-C3N4/CdSe nanocomposite materials were successfully synthesized. In a typical assembly process, the immunosensor was constructed by modifying a fluorine-doped tin oxide (FTO) electrode with poly dimethyl diallyl ammonium chloride (PDDA), the g-C3N4/CdSe nanocomposite, the anti-carcinoembryonic antigen antibody (Ab) and the blocking agent bovine serum albumin (BSA) successively. In the presence of CEA, the photocurrent signal of the prepared immunosensor decreased significantly. Accordingly, under the optimal conditions, a label-free photoelectrochemical immunosensor was established, and it exhibited excellent selectivity and repeatability for CEA detection. The detection limit was 0.21 ng mL-1, and the range was 10 ng mL-1-100 μg mL-1. Simultaneously, the immunosensor also provides a likely sensing device for detecting other protein targets, which is of great significance for early clinical diagnosis.

Surface-enhanced electrochemiluminescence combined with resonance energy transfer for sensitive carcinoembryonic antigen detection in exhaled breath condensates

The detection of biomarkers in exhaled breath condensates (EBCs) is regarded as a promising non-invasive diagnostic approach. However, the ultralow concentration of biomarkers in EBCs is a great challenge. Herein, a sensitive dual signal amplification strategy was developed based on surface-enhanced electrochemiluminescence (SEECL) combined with resonance energy transfer (RET). Gold nanoparticles-functionalized graphite-like carbon nitride nanohybrids (Au-g-C₃N₄ NHs) could be used as an energy transfer donor because of the good overlap between its emission peak and the absorption peak of tris(2,2'-bipyridine)ruthenium dichloride (Ru(bpy)₃Cl₂) at 460 nm. Gold-silicon dioxide core-shell nanoparticles doped with Ru(bpy)₃²⁺(Au@SiO₂-Ru) were employed as an energy transfer acceptor emitting at 620 nm. Moreover, the signals at 620 nm emitted by Ru (bpy)₃²⁺ were enhanced by 5 times, attributed to the localized surface plasmon resonance (LSPR) of gold nanoparticles (Au NPs). The detection of carcinoembryonic antigen (CEA) was performed by using two aptamers as the recognition unit; whereby aptamer 1 (Apt1) was modified on the surface of Au-g-C₃N₄ NHs, and aptamer 2 (Apt2) was banded on the surface of Au@SiO₂-Ru. In the presence of CEA, a sandwich structure was formed between Au-g-C₃N₄ NHs-Apt1-CEA and Apt2-Au@SiO₂-Ru, which resulted in an ultrasensitive detection of CEA. The proposed electrochemiluminescence sensor showed a wide linear relationship with the CEA concentration in the range from 1.0 pg mL^-1 to 5.0 ng mL^-1, with a limit of detection (LOD) of 0.3 pg mL^-1. Finally, the practicality of the proposed sensor was demonstrated to detect CEA in EBCs, and the obtained results were in good agreement with the enzyme-linked immunosorbent assay (ELISA) method.

A label-free electrochemical magnetic aptasensor based on exonuclease III-assisted signal amplification for determination of carcinoembryonic antigen

A novel label-free and exonuclease III (Exo III)-assisted signal amplification electrochemical aptasensor was constructed for the determination of carcinoembryonic antigen (CEA) via magnetic field-induced self-assembly of magnetic biocomposites (Fe₃O₄@Au NPs-S1-S2-S3). The magnetic biocomposites were acquired by modifying double-stranded DNA (S1-S2-S3) on the surface of Fe₃O₄@Au nanoparticles (Fe₃O₄@Au NPs). Among them, Fe₃O₄@Au NPs were used as carriers for magnetic separation, thiolated single-stranded DNA (S1) provided signal sequence, CEA aptamer (S2) worked as a recognition element, and complementary strand (S3) was used to form double strands. In the presence of CEA, S2 bonded with CEA competitively; the exposed S1 could not be cleaved since Exo III was inactive against ssDNA. The G-quadruplex/hemin complexes finally formed with the existence of K⁺, and the high electrochemical signal of G-quadruplex/hemin complexes was recorded by differential pulse voltammetry (DPV) at - 0.6 V. Conversely, in the absence of CEA, dsDNA was cleaved from the 3' blunt end by Exo III; the disappearance of G-rich sequence blocked the generation of the signal. This method exhibited good selectivity and sensitivity for the determination of CEA; the linear range was from 0.1 to 200 ng mL^-1 and the limit of detection was 0.4 pg mL^-1. Graphical abstract.