Surface area expansion by flower-like nanoscale layered double hydroxides for high efficient stir bar sorptive extraction

Covalent organic framework/layered double hydroxide composite-coated poly(ether ether ketone) jacket for stir bar sorptive extraction of Sudan dyes

A novel coating for stir bar sorptive extraction was developed by growing a covalent organic framework, TpPa-1 (derived from phenylenediamine and 1,3,5-trimethylphloroglucinol), onto the surface of Ni-Al layered double hydroxide. Using a poly(ether ether ketone) tube as the supporting substrate, a TpPa-1/layered double hydroxide-coated stir bar was fabricated and demonstrated excellent extraction performance for Sudan dyes. Notably, its extraction efficiency significantly exceeded that of stir bars modified with only TpPa-1 or Ni-Al layered double hydroxide. Based on this innovative coating, a stir bar sorptive extraction-high performance liquid chromatography method was established. This method exhibited low limits of detection (0.04-0.08 ng/mL) for the analysis of Sudan dyes. It also featured a wide linear range (0.25-100 or 200 ng/mL) and demonstrated good repeatability with relative standard deviations ≤6.22%. The recoveries obtained for spiked lake water and chili powder samples were 93.5%-105.2% and 87.8%-100.6%, respectively, demonstrating the practical potential of the developed method for detecting trace Sudan dyes in real samples.

Progress in pre-treatment and extraction of organic and inorganic pollutants by layered double hydroxide for trace-level analysis

Continuous release of pollutants into the environment poses serious threats to environmental sustainability and human health. For trace-level analysis of pollutants, layered double hydroxide (LDH) is an attractive option to impart enhanced sorption capability and sensitivity toward pollutants because of its unique layered structure, tunable interior architecture, high anion-exchange capacities, and high porosity (e.g., Zn/Cr LDH/DABCO-IL, Ni/Al LDH, CS-Ni/Fe LDH, SDS-Fe₃O₄@SiO₂@Mg-Al LDH, Boeh/Mg/Al LDH/pC, and Fe@NiAl LDH). In concert with the well-defined analytical methodologies (e.g., HPLC and GC), the LDH materials can be employed to detect trace-level targets (e.g., as low as ∼ 20 fg/L for phenols) in aqueous environments. This review highlights LDH as a promising material for pre-treatment of a variety of organic and inorganic target pollutants in complex real matrices. Challenges and future requirements for research into LDH-based analytical methods are also discussed.

Nanoarchitectured two-dimensional layered double hydroxides-based nanocomposites for biomedical applications

Despite the exceptional physicochemical and morphological characteristics, the pristine layered double hydroxides (LDHs), or two-dimensional (2D) hydrotalcite clays, often suffer from various shortcomings in biomedicine, such as deprived thermal and chemical stabilities, acid-prone degradation, as well as lack of targeting ability, hampering their scale-up and subsequent clinical translation. Accordingly, diverse nanocomposites of LDHs have been fabricated by surface coating of organic species, impregnation of inorganic species, and generation of core-shell architectures, resulting in the complex state-of-the-art architectures. In this article, we initially emphasize various bothering limitations and the chemistry of these pristine LDHs, followed by discussions on the engineering strategies of different LDHs-based nanocomposites. Further, we give a detailed note on diverse LDH nanocomposites and their performance efficacy in various biomedical applications, such as drug delivery, bioimaging, biosensing, tissue engineering and cell patterning, deoxyribonucleic acid (DNA) extraction, as well as photoluminescence, highlighting the influence of various properties of installed supramolecular assemblies on their performance efficacy. In summary, we conclude with interesting perspectives concerning the lessons learned to date and the strategies to be followed to further advance their scale-up processing and applicability in medicine.

In-situ growth of a spherical vinyl-functionalized covalent organic framework as stationary phase for capillary electrochromatography-mass spectrometry analysis

Column technology is an important part in capillary electrochromatographic science. Developing novel stationary phase with high separation efficiency and high loading capacity is an essential work. In this work, a novel spherical vinyl-functionalized covalent-organic framework (COF-V) was synthesized at room temperature and firstly employed as stationary phase for CEC-MS analysis. The COF-V based CEC column was characterized by scanning electron microscopy, X-ray diffraction and Fourier transform infrared spectroscopy. The results proved the successful modification of COF-V. The COF-V based column possesses the advantages like strong electroosmotic flow, high separation efficiency and high loading capacity. The CEC column showed powerful separation selectivity to several kinds of compounds, and the highest column efficiency (theoretical plates, N) was over 1.4 × 10⁵ plates·m^-1 for methylbenzene. Besides, the COF-V modified column exhibited excellent repeatability and stability. The relative standard deviations (RSDs) of retention times for intra-day (n = 5), inter-day (n = 3) runs and column-to-column (n = 3) were all less than 2.1%. Hence, the COF-V modified column was successfully applied in CEC-MS for determination of antiepileptic drug, triazine herbicides and active ingredients in traditional Chinese medicine.

Applications of porous frameworks in solid-phase microextraction

Porous frameworks are a term of attracting solid materials assembled by interconnection of molecules and ions. These trendy materials due to high chemical and thermal stability, well-defined pore size and structure, and high effective surface area gained attention to employ as extraction phase in sample pretreatment methods before analytical analysis. Solid-phase microextraction is an important subclass of sample preparation technique that up to now different configurations of this method have been introduced to get adaptable with different environments and analytical instruments. In this review, theoretical aspect and different modes of solid-phase microextraction method are investigated. Different classes of porous frameworks and their applications as extraction phase in the proposed microextraction method are evaluated. Types and features of supporting substrates and coating procedures of porous frameworks on them are reviewed. At the end, the prospective and the challenges ahead in this field are discussed.

In-tube stir bar sorptive extraction based on 3-aminopropyl triethoxysilane surface-modified Ce-doped ZnAl layered double hydroxide thin film for determination of nonsteroidal anti-inflammatory drugs in saliva samples

A thin-film based on 3-aminopropyl triethoxysilane surface-modified Ce-doped zinc-aluminum layered double hydroxide was synthesized on the inner surface of an aluminum tube. It has been applied to in-tube stir bar sorptive extraction of nonsteroidal anti-inflammatory drugs in saliva samples followed by high-performance liquid chromatography. The sorbent was characterized by scanning electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and elemental mapping. The extraction parameters including sample pH (4.2), extraction time (10 min), stirring speed (800 rpm), type of eluent (acidified tetrahydrofuran), eluent volume (100 μL), and desorption time (6 min) were thoroughly optimized. Under the optimum conditions, limits of detection were found to be less than 5.0 ng mL^-1. Calibration plots were linear within the range 10-1000 ng mL^-1 (R² > 0.9982). Absolute recoveries were calculated in the range 63.5 to 72.4%. The repeatability (intra- and inter-day precision) and reproducibility (tube-to-tube precision) at concentrations of 50, 250, and 500 ng mL^-1 were less than 7.6% and 9.4%, respectively. The method accuracy based on the relative error was calculated at these concentrations and ranged from - 4.9 to - 9.3% for intra-day relative error (%) and - 6.8 to - 11% for inter-day relative error (%). Finally, the method applicability was examined for the determination of nonsteroidal anti-inflammatory drugs in saliva samples, and good relative recoveries were obtained within the range 86.5 to 95.2%. As a result, the introduced method can be applied as a suitable alternative to measuring nonsteroidal anti-inflammatory drugs in biological fluids. Graphical abstract A surface-modified Ce-doped ZnAl LDH thin film was synthesized on the inner surface of an Al tube and applied for in-tube stir bar sorptive extraction of NSAIDs in saliva.