High-performance Pt/Ti3C2Tx MXene based graphene electrochemical transistor for selective detection of dopamine

Platinum nanowires/MXene nanosheets/porous carbon ternary nanocomposites for in situ monitoring of dopamine released from neuronal cells

Dopamine is an important neurotransmitter in the body and closely related to many neurodegenerative diseases. Therefore, the detection of dopamine is of great significance for the diagnosis and treatment of diseases, screening of drugs and unraveling of relevant pathogenic mechanisms. However, the low concentration of dopamine in the body and the complexity of the matrix make the accurate detection of dopamine challenging. Herein, an electrochemical sensor is constructed based on ternary nanocomposites consisting of one-dimensional Pt nanowires, two-dimensional MXene nanosheets, and three-dimensional porous carbon. The Pt nanowires exhibit excellent catalytic activity due to the abundant grain boundaries and highly undercoordinated atoms; MXene nanosheets not only facilitate the growth of Pt nanowires, but also enhance the electrical conductivity and hydrophilicity; and the porous carbon helps induce significant adsorption of dopamine on the electrode surface. In electrochemical tests, the ternary nanocomposite-based sensor achieves an ultra-sensitive detection of dopamine (S/N = 3) with a low limit of detection (LOD) of 28 nM, satisfactory selectivity and excellent stability. Furthermore, the sensor can be used for the detection of dopamine in serum and in situ monitoring of dopamine release from PC12 cells. Such a highly sensitive nanocomposite sensor can be exploited for in situ monitoring of important neurotransmitters at the cellular level, which is of great significance for related drug screening and mechanistic studies.

Ti3C2Tx Coated with TiO2 Nanosheets for the Simultaneous Detection of Ascorbic Acid, Dopamine and Uric Acid

Two-dimensional MXenes have become an important material for electrochemical sensing of biomolecules due to their excellent electric properties, large surface area and hydrophilicity. However, the simultaneous detection of multiple biomolecules using MXene-based electrodes is still a challenge. Here, a simple solvothermal process was used to synthesis the Ti3C2Tx coated with TiO2 nanosheets (Ti3C2Tx@TiO2 NSs). The surface modification of TiO2 NSs on Ti3C2Tx can effectively reduce the self-accumulation of Ti3C2Tx and improve stability. Glassy carbon electrode was modified by Ti3C2Tx@TiO2 NSs (Ti3C2Tx@TiO2 NSs/GCE) and was able simultaneously to detect dopamine (DA), ascorbic acid (AA) and uric acid (UA). Under concentrations ranging from 200 to 1000 μM, 40 to 300 μM and 50 to 400 μM, the limit of detection (LOD) is 2.91 μM, 0.19 μM and 0.25 μM for AA, DA and UA, respectively. Furthermore, Ti3C2Tx@TiO2 NSs/GCE demonstrated remarkable stability and reliable reproducibility for the detection of AA/DA/UA.

Ti3C2Tx/laser-induced graphene-based micro-droplet electrochemical sensing platform for rapid and sensitive detection of benomyl

The design and fabrication of high-performance electrode devices are highly important for the practical application of electrochemical sensors. In this study, flexible three-dimensional porous graphene electrode devices were first facilely fabricated using common laser ablation technique at room temperature. After then, hydrophilic two-dimensional MXene (Ti3C2Tx) nanosheet was decorated on the surface of the laser-induced graphene (LIG), resulting in disposable Ti3C2Tx/LIG electrode devices. After introducing Ti3C2Tx nanosheet, the electrochemical active area, electron transfer ability of LIG electrode device and its adsorption efficiency toward organic pesticide benomyl was significantly boosted. As a result, the fabricated Ti3C2Tx/LIG electrode device exhibited significantly enhanced electrocatalytic activity toward benomyl oxidation. Based on this, a novel and ultra-sensitive electrochemical platform for micro-droplet detection of benomyl was achieved in the range of 10 nM-6000 nM with detection sensitivity of 169.9 μA μM-1 cm-2 and detection limit of 5.8 nM. Considering the low-cost Ti3C2Tx/LIG electrode devices are rarely used for electrochemical analysis, we believed this research work will contribute to exploring the broader application of MXene/LIG electrode devices in the field of electrochemical sensing.

Harnessing two-dimensional nanomaterials for diagnosis and therapy in neurodegenerative diseases: Advances, challenges and prospects

Neurodegenerative diseases (NDDs) are specific brain disorders characterized by the progressive deterioration of different motor activities as well as several cognitive functions. Current conventional therapeutic options for NDDs are limited in addressing underlying causes, delivering drugs to specific neuronal targets, and promoting tissue repair following brain injury. Due to the paucity of plausible theranostic options for NDDs, nanobiotechnology has emerged as a promising field, offering an interdisciplinary approach to create nanomaterials with high diagnostic and therapeutic efficacy for these diseases. Recently, two-dimensional nanomaterials (2D-NMs) have gained significant attention in biomedical and pharmaceutical applications due to their precise drug-loading capabilities, controlled release mechanisms, enhanced stability, improved biodegradability, and reduced cell toxicity. Although various studies have explored the diagnostic and therapeutic potential of different nanomaterials in NDDs, there is a lack of comprehensive review addressing the theranostic applications of 2D-NMs in these neuronal disorders. Therefore, this concise review aims to provide a state-of-the-art understanding of the need for these ultrathin 2D-NMs and their potential applications in biosensing and bioimaging, targeted drug delivery, tissue engineering, and regenerative medicine for NDDs.

Graphene- and MXene-based materials for neuroscience: diagnostic and therapeutic applications

MXenes and graphene are two-dimensional materials that have gained increasing attention in neuroscience, particularly in sensing, theranostics, and biomedical engineering. Various composites of graphene and MXenes with fascinating thermal, optical, magnetic, mechanical, and electrical properties have been introduced to develop advanced nanosystems for diagnostic and therapeutic applications, as exemplified in the case of biosensors for neurotransmitter detection. These biosensors display high sensitivity, selectivity, and stability, making them promising tools for neuroscience research. MXenes have been employed to create high-resolution neural interfaces for neuroelectronic devices, develop neuro-receptor-mediated synapse devices, and stimulate the electrophysiological maturation of neural circuits. On the other hand, graphene/derivatives exhibit therapeutic applicability in neuroscience, as exemplified in the case of graphene oxide for targeted delivery of therapeutic agents to the brain. While MXenes and graphene have potential benefits in neuroscience, there are also challenges/limitations associated with their use, such as toxicity, environmental impacts, and limited understanding of their properties. In addition, large-scale production and commercialization as well as optimization of reaction/synthesis conditions and clinical translation studies are very important aspects. Thus, it is important to consider the use of these materials in neuroscience research and conduct further research to obtain an in-depth understanding of their properties and potential applications. By addressing issues related to biocompatibility, long-term stability, targeted delivery, electrical interfaces, scalability, and cost-effectiveness, MXenes and graphene have the potential to greatly advance the field of neuroscience and pave the way for innovative diagnostic and therapeutic approaches for neurological disorders. Herein, recent advances in therapeutic and diagnostic applications of graphene- and MXene-based materials in neuroscience are discussed, focusing on important challenges and future prospects.

A Facile Graphene Conductive Polymer Paper Based Biosensor for Dopamine, TNF-α, and IL-6 Detection

Paper-based biosensors are a potential paradigm of sensitivity achieved via microporous spreading/microfluidics, simplicity, and affordability. In this paper, we develop decorated paper with graphene and conductive polymer (herein referred to as graphene conductive polymer paper-based sensor or GCPPS) for sensitive detection of biomolecules. Planetary mixing resulted in uniformly dispersed graphene and conductive polymer ink, which was applied to laser-cut Whatman filter paper substrates. Scanning electron microscopy and Raman spectroscopy showed strong attachment of conductive polymer-functionalized graphene to cellulose fibers. The GCPPS detected dopamine and cytokines, such as tumor necrosis factor-alpha (TNF-α), and interleukin 6 (IL-6) in the ranges of 12.5-400 µM, 0.005-50 ng/mL, and 2 pg/mL-2 µg/mL, respectively, using a minute sample volume of 2 µL. The electrodes showed lower detection limits (LODs) of 3.4 µM, 5.97 pg/mL, and 9.55 pg/mL for dopamine, TNF-α, and IL-6 respectively, which are promising for rapid and easy analysis for biomarkers detection. Additionally, these paper-based biosensors were highly selective (no serpin A1 detection with IL-6 antibody) and were able to detect IL-6 antigen in human serum with high sensitivity and hence, the portable, adaptable, point-of-care, quick, minute sample requirement offered by our fabricated biosensor is advantageous to healthcare applications.

Vancomycin-Stabilized Platinum Nanoparticles with Oxidase-like Activity for Sensitive Dopamine Detection

The development of efficient, reliable, and sensitive dopamine detection methods has attracted much attention. In this paper, vancomycin-stabilized platinum nanoparticles (Van-Ptn NPs, n = 0.5, 1, 2) were prepared by the biological template method, where n represented the molar ratio of vancomycin to Pt. The results show that Van-Pt2 NPs had oxidase-like activity and peroxidase-like activity, and the mechanism was due to the generation of reactive oxygen 1O2 and OH. Van-Pt2 NPs exhibited good temperature stability, storage stability, and salt solution stability. Furthermore, Van-Pt2 NPs had almost no cytotoxicity to A549 cells. More importantly, the colorimetric detection of DA in human serum samples was performed based on the oxidase-like activity of Van-Pt2 NPs. The linear range of DA detection was 10-700 μM, and the detection limit was 0.854 μM. This study establishes a rapid and reliable method for the detection of dopamine and extends the application of biosynthetic nanoparticles in the field of biosensing.

Novel graphene electrochemical transistors incorporating zirconia inorganic molecular imprinted layer：Design, construction and application for highly sensitive and selective detection of acetaminophen

Owing to their intrinsic amplifying effect together with chemical stability, graphene electrochemical transistor sensors (GECTs) are gaining momentum for sensing applications. However, the surface of GECTs for different detection substances must be modified with different recognition molecules, which was cumbersome and lack a universal method. Molecularly imprinted polymer (MIP) is a kind of polymer with specific recognition function for given molecules. Here, MIP and GECTs were combined to effectively solve the problem of weak selectivity of GECTs, and achieve the high sensitivity and selectivity of MIP-GECTs equipment in detecting acetaminophen (AP) in complex urine environment. A novel molecular imprinting sensor based on Au nanoparticles modified zirconia (ZrO₂) inorganic molecular imprinting membrane on reduced graphene oxide (ZrO₂-MIP-Au/rGO) was proposed. ZrO₂-MIP-Au/rGO was synthesized by one-step electropolymerization using AP as template, ZrO₂ precursor as the functional monomer. The -OH group on ZrO₂ and the -OH/-CONH- group on AP were easily bonded by hydrogen bonding to form a MIP layer on the surface, which allows the sensor to have a large number of imprinted cavities for AP specific adsorption. As a proof of method, the GECTs based on ZrO₂-MIP-Au/rGO functional gate electrode has the characteristics of wide linear range (0.1 nM-4 mM), low detection limit (0.1 nM) and high selectivity for AP detection. These achievements highlight the introduction of specific and selective MIP to GECTs with unique amplification function, which could effectively solve the problem of selectivity of GECTs in complex environments, suggesting the potential of MIP-GECTs in real-time diagnosis.

Design of a rapid electrochemical biosensor based on MXene/Pt/C nanocomposite and DNA/RNA hybridization for the detection of COVID-19

Since the rapid spread of the SARS-CoV-2 (2019), the need for early diagnostic techniques to control this pandemic has been highlighted. Diagnostic methods based on virus replication, such as RT-PCR, are exceedingly time-consuming and expensive. As a result, a rapid and accurate electrochemical test which is both available and cost-effective was designed in this study. MXene nanosheets (Ti₃C₂Tx) and carbon platinum (Pt/C) were employed to amplify the signal of this biosensor upon hybridization reaction of the DNA probe and the virus's specific oligonucleotide target in the RdRp gene region. By the differential pulse voltammetry (DPV) technique, the calibration curve was obtained for the target with varying concentrations ranging from 1 aM to 100 nM. Due to the increase in the concentration of the oligonucleotide target, the signal of DPV increased with a positive slope and a correlation coefficient of 0.9977. Therefore, at least a limit of detection (LOD) was obtained 0.4 aM. Furthermore, the specificity and sensitivity of the sensors were evaluated with 192 clinical samples with positive and negative RT-PCR tests, which revealed 100% accuracy and sensitivity, 97.87% specificity and limit of quantification (LOQ) of 60 copies/mL. Besides, various matrices such as saliva, nasopharyngeal swabs, and serum were assessed for detecting SARS-CoV-2 infection by the developed biosensor, indicating that this biosensor has the potential to be used for rapid Covid-19 test detection.

Size-Dependent Electrochemistry of Oxygenated Ti3 C2 Tx MXenes

2D MXenes are widely proved to be potential electrode materials, although the size effect on their electrochemistry is not fully understood. In this work, Ti₃ C₂ T_x nanoflakes are prepared through acidic etching of Ti₃ AlC₂ powders, followed by the intercalation treatment with tetrapropylammonium hydroxide. Such a method produces large-scale delaminated and oxygenated nanoflakes. With aid of centrifugation, the nanoflakes with varied lateral sizes and thicknesses are collected, where electrochemical response of charged redox probes and polar phenol molecules is varied. Density functional theory and energy dispersive spectroscopy confirm such electrochemical response is dependent on the size and thickness of used nanoflakes, more exactly the oxygen content on their surface. Taking the nanoflakes obtained using a centrifugal speed of 5000 rpm (MX-TPA_0.2 ) as an example, they feature good dispersibility, a high oxygen content, a small size, and a thin thickness. On these nanoflakes electrochemical response of polar p-substituted phenols is pronounced, stemming from a strong electron-withdrawing interaction of their oxygenated termination with the Ar-OH. A sensitive electrochemical sensor is further constructed for the detection of p-nitrophenol. This work thus provides an approach to synthesize MXenes with different sizes and thicknesses as well as further to reveal size-dependent electrochemistry of MXenes.

An efficient Pt@MXene platform for the analysis of small-molecule natural products

Small-molecule (m/z<500) natural products have rich biological activity and significant application value thus need to be effectively detected. Surface-assisted laser desorption/ionization mass spectrometry (SALDI MS) has become a powerful detection tool for small-molecule analysis. However, more efficient substrates need to be developed to improve the efficiency of SALDI MS. Thus, platinum nanoparticle-decorated Ti₃C₂ MXene (Pt@MXene) was synthesized in this study as an ideal substrate for SALDI MS in positive ion mode and exhibited excellent performance for the high-throughput detection of small molecules. Compared with using MXene, GO, and CHCA matrix, a stronger signal peak intensity and wider molecular coverage was obtained using Pt@MXene in the detection of small-molecule natural products, with a lower background, excellent salt and protein tolerance, good repeatability, and high detection sensitivity. The Pt@MXene substrate was also successfully used to quantify target molecules in medicinal plants. The proposed method has potentially wide application.

MXene Contact Engineering for Printed Electronics

MXenes emerging as an amazing class of 2D layered materials, have drawn great attention in the past decade. Recent progress suggest that MXene-based materials have been widely explored as conductive electrodes for printed electronics, including electronic and optoelectronic devices, sensors, and energy storage systems. Here, the critical factors impacting device performance are comprehensively interpreted from the viewpoint of contact engineering, thereby giving a deep understanding of surface microstructures, contact defects, and energy level matching as well as their interaction principles. This review also summarizes the existing challenges of MXene inks and the related printing techniques, aiming at inspiring researchers to develop novel large-area and high-resolution printing integration methods. Moreover, to effectually tune the states of contact interface and meet the urgent demands of printed electronics, the significance of MXene contact engineering in reducing defects, matching energy levels, and regulating performance is highlighted. Finally, the printed electronics constructed by the collaborative combination of the printing process and contact engineering are discussed.

Colorimetric method transforms into highly sensitive homogeneous voltammetric sensing strategy for mercury ion based on mercury-stimulated Ti3C2Tx MXene nanoribbons@gold nanozyme activity

Nanozymes were emerged as the next generation of enzyme-mimics which exhibit great applications in various fields, but there is rarely report in the electrochemical detection of heavy metal ions. In this work, Ti₃C₂T_x MXene nanoribbons@gold (Ti₃C₂T_x MNR@Au) nanohybrid was prepared firstly via a simple self-reduction process and its nanozyme activity was studied. The results showed the peroxidase-like activity of bare Ti₃C₂T_x MNR@Au is extremely weak, while in the presence of Hg²⁺, the related nanozyme activity is stimulated and improved remarkably, which can easily catalyze oxidation of several colorless substrates (e.g., o-phenylenediamine) to form colored products. Interestingly, the product of o-phenylenediamine exhibits a strong reduction current which is considerably sensitive to the Hg²⁺ concentration. Based on this phenomenon, an innovative and highly sensitive homogeneous voltammetric (HVC) sensing strategy was then proposed to detect Hg²⁺ via transforming the colorimetric method into electrochemistry since it can exhibit several unique advantages (e.g., rapid responsiveness, high sensitivity and quantificational). Compared to the conventional electrochemical sensing methods for Hg²⁺, the designed HVC strategy can avoid the modification processes of electrode coupled with enhanced sensing performances. Therefore, we expect the as-proposed nanozyme-based HVC sensing strategy provides a new development direction for detecting Hg²⁺ and other heavy metals.

Dual-mode immunosensor based on Cu-doped Mo2C nanosheets as signal labels

A method for detecting of Carcinoembryonic antigen(CEA) with improved accuracy is urgently needed. In this work, a dual-mode immunosensor for accurate detection of CEA was fabricated, which used a Cu-doped Mo₂C co-catalyst as an enhancer. Especially, Cu-doped Mo₂C presents a strong different pulse voltammetry (DPV) signal for the electron transfer between Cu²⁺ and Cu⁺, without the addition of K₃[Fe(CN₆)] and other electron transfer mediators, but also shows high electrocatalytic activity towards H₂O₂ redox reactions. So that detection sensitivity of the chronoamperometry (CA) was enhanced. Furthermore, characterized by excellent conductivity, highly ordered pore distribution and great surface area, Ti₃C₂ Mxenes can be effective in promoting electron transfer and loading a large number of AuNPs. In the meantime, AuNPs can also immobilize CEA-Ab₁ through Au-N bonds. Based on a Cu-Mo₂C-Au dual-signal indicator, Ti₃C₂ Mxene-Au as the matrix, the immunsosensor was developed to achieve dual-signal detection of CEA. Satisfactory detection ranges (1 fg.mL^-1 to 40 ng.mL^-1) were obtained with limits of detection of 0.33 fg.ml^-1 (DPV) and 1.67 fg.ml^-1 (CA), respectively. Therefore, the prepared electrochemical immunosensor has good application prospects for the detection of CEA.

2D MXene-Based Biosensing: A Review

MXene emerged as decent 2D material and has been exploited for numerous applications in the last decade. The remunerations of the ideal metallic conductivity, optical absorbance, mechanical stability, higher heterogeneous electron transfer rate, and good redox capability have made MXene a potential candidate for biosensing applications. The hydrophilic nature, biocompatibility, antifouling, and anti-toxicity properties have opened avenues for MXene to perform in vitro and in vivo analysis. In this review, the concept, operating principle, detailed mechanism, and characteristic properties are comprehensively assessed and compiled along with breakthroughs in MXene fabrication and conjugation strategies for the development of unique electrochemical and optical biosensors. Further, the current challenges are summarized and suggested future aspects. This review article is believed to shed some light on the development of MXene for biosensing and will open new opportunities for the future advanced translational application of MXene bioassays.

MXene-based composites as an electrochemical sensor for ultrasensitive determination of ofloxacin

Sensitive determination of ofloxacin (OFL) is very essential for human health and environmental protection. Here, a novel composite of gold nanoparticles(nAu)@MXene(Ti₃C₂T_x)/poly-p-aminobenzene sulfonic acid (PABSA) was fabricated on the surface of glassy carbon electrode (GCE) and used to sensitively determine OFL. The results of experiments showed that the obtained nAu@Ti₃C₂T_x/PABSA/GCE electrode could be used as an electrochemical sensor to directly detect ofloxacin (OFL) by differential pulse voltammetry (DPV). Under the optimal conditions, the proposed electrode displayed a broader linear range and a lower detection limit (LOD) for OFL determination when it was compared to those similar sensors. The linear range was from 5.0 × 10^-8 to 5.0 × 10^-4 mol/L and the LOD was 3.7 × 10^-8 mol/L (S/N = 3). The nAu@Ti₃C₂T_x/PABSA/GCE electrode also showed good selectivity, repeatability, and reproducibility. Finally, the proposed electrode was used to detect OFL in commercial samples by the standard addition method. The obtained recovery was from 97.3% and 105.7% showing its potential applications in actual sample analysis.

Ti3C2@Pd nanocatalytic amplification-polypeptide SERS/RRS/Abs trimode biosensoring platformfor ultratrace trinitrotoluene

A new MXene supported Pd nanoparticles (Ti₃C₂@Pd) nanosol with good stability and strong catalysis was prepared by the two-step procedure. Experiment was found that Ti₃C₂@Pd could strongly catalyze the reduction of HAuCl₄ by H₂O₂ to produce gold nanoparticles (AuNPs), with strong surface enhanced Raman scattering (SERS), resonance Rayleigh scattering (RRS) and surface plasmon resonance absorption (Abs). Coupled this new SERS/RRS/Abs trimode nanocatalytic indicator reaction with specific TNT polypeptide (PT_TNT), a facile and selective trimode polypeptide biosensoring platform was established for the detection of ultratrace TNT, with a linear range of 1.1-66, 1.1-66 and 4.4-66 pmol/L TNT, and detection limit (DL) of 0.69, 0.97 and 3.36 pmol/L by SERS, RRS and Abs assay respectively. It has been used to detect TNT in wastewater and soil samples, with recovery of 98.7-106% and RSD of 6.22-8.77%. In addition, this biosensoring platform can be also used to assay glyphosate and estradiol, respectively.