Buffer species-dependent catalytic activity of Cu-Adenine as a laccase mimic for constructing sensor array to identify multiple phenols

One-step construction of bioinspired multi-enzyme mimicking nanozyme as a universal platform for multi-mode sensing and catalytic degradation

Nanozymes, a category of nanomaterials with exceptional enzyme-like activity, exhibit the significant promise to overcome the inherent limitations of natural enzymes. Inspired by the active site structure of natural laccase, a biomimetic MA-Cu nanozyme with three-dimensional network structure was constructed in water system through one-step complexation based on the specific coordination between nitrogen-rich triazine heterocyclic melamine and Cu2+, in a facile, green and economical manner. Compared to natural laccase, MA-Cu possesses superior multi-enzyme mimicking activity, stability and cost-effectiveness. Through comprehensive characterizations, activity tests and theoretical calculations, the catalytic mechanism and the ligand-tunability of enzyme-like activity have been thoroughly investigated. Based on its multi-enzyme-like activities, a multifunctional monitoring platform for sulfide in food, epinephrine in preparations and glutathione in cells was successfully constructed, respectively. Notably, a green degradation and discrimination platform based on MA-Cu for various pollutants was developed, exhibiting distinguished substrate universality and detoxication capacity. As a stable, easily scalable and commercially applicable nanozyme, MA-Cu is expected to become a compelling candidate for replacing natural enzyme, showing excellent prospects in environmental remediation and biosensing.

A novel method for the rapid determination of phenolic compounds based on the nanozyme with laccase-like activity

Phenolic compounds are prevalent in domestic and industrial effluents, leading a serious environmental hazard. Paper-based analysis device mediated by nanozymes has shown great potential in portable visual determination of phenolic compounds in the environment. In this work, we used nicotinic acid derivatives such as pyridine-2,3-dicarboxylic acid, 2-methylnicotinic acid and 2-aminonicotinic acid by coordinating copper (II) acetate monohydrate coordination to obtain Cu2-COOHNA, Cu2-CH3NA, Cu2-ANA nanozymes with laccase-activity. Compared with natural laccase and CuNA, Cu2-ANA exhibited higher catalytic activity with a similar Km of 0.05 mM and a higher Vmax of 6.08 μM min-1. Cu2-ANA also exhibited a remarkable level of stability and can be used under a wide range of conditions. In addition, Cu2-ANA catalyzed the oxidation of different common phenolic compounds (PCs) and mix PCs. A visually inspective portable sensor constructed by using paper test strips coated with Cu2-ANA employed the colorimetric method for evaluating the concentration of PCs. There is no need for complicated instrumentation, and the popularity and portability of smartphones make on-site testing more efficient and convenient.

Substrate Specificity of Adenine-Cu-PO4 Nanozyme: Ascorbic Acid Oxidation and Selective Cytotoxicity

Though nanozymes are becoming promising alternatives to natural enzymes due to their superior properties, constructing nanozyme with high specificity is still a great challenge. Herein, with Cu2+ as an active site and adenine as a ligand, Adenine-Cu-PO4 is synthesized in phosphate-buffered saline. As an oxidase mimic, Adenine-Cu-PO4 could selectively catalyze oxidation of ascorbic acid (AA) to dehydroascorbic acid, but not universal substrates (3,3',5,5'-tetramethylbenzidine (TMB), 2,2'-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) and 2,4-dichlorophenol (2,4-DP)), small biomolecules (dopamine, glutathione, glucose, galactose), other vitamins (vitamin A acid, vitamin B1, vitamin K1) and even dithiothreitol (a common interference of AA). Such the specific AA catalytic oxidation is revealed that Adenine-Cu-PO4 selectively binds with AA through hydrogen bonds, accompanied with catalyzing AA oxidation, and concurrently O2 transferring to H2O2 via O2⋅-, further to H2O via ⋅OH. Based on the produced reactive oxygen species, with AA as a pro-oxidant, Adenine-Cu-PO4 nanozyme efficiently triggers severe intratumor oxidative stress to induce tumor cell death. This work opens a new avenue to design intrinsic nanozymes with high specificity, and also presents a promising application in the field of AA oxidation induced cancer therapy.

LTP-assisted fabrication of laccase-like Cu-MOF nanozyme-encoded array sensor for identification and intelligent sensing of bioactive components in food

Nanozymes are potential candidates for constructing sensors due to their adjustable activity, high stability, and high cost-effectiveness. However, due to the lack of reasonable means, designing and preparing efficient nanozymes remains challenging. Herein, inspired by the property of natural laccase, we applied the novel and facile low-temperature plasma (LTP) technology to fabricate a series of different base-ligand Cu metal organic framework (MOF) nanozymes (namely, A-Cu, G-Cu, C-Cu and T-Cu nanozymes) with laccase-like activity successfully. Owing to the different catalytic capacities of four types of base-Cu-MOF nanozymes in the response to five common effective bioactive substances, we constructed the nanozyme-encoded array sensor for the identification of different bioactive compounds. As a result, the four-channel colorimetric sensor array was constructed, in which four laccase-like nanozymes were utilized as the sensing units, achieving high-throughput, high-sensitivity and rapid detection/identification of five common bioactive compounds in the concentration range of 1.5-150 μg mL-1 through different color output patterns. It is worth noting that the as-prepared sensor array can successfully distinguish the natural bioactive compounds in a variety of real samples. Furthermore, with the assistance of smartphones, we also designed a portable smart sensing approach for detecting the bioactive compounds effectively in food. This study has therefore not only provided an effective way for preparation highly effectively nanozymes, but also established a new sensing platform for intelligent sensing of bioactive components in food.

Building hydrophobic substrate pocket to boost activity of laccase-like nanozyme through acetonitrile-mediated strategy

Nanozymes, as promising alternatives to natural enzymes, offer several advantages with biocatalytic functions but remain inferior in catalytic activity. It is crucial to focus on factors that affect the enzymatic activity of nanozymes and develop strategies to make them more competitive with natural enzymes. Herein, CuV2O5 nanorods are confirmed to own the intrinsic laccase-like activity, and an acetonitrile (MeCN)-mediated strategy is proposed for reaction acceleration by mimicking the enzymatic substrate pocket. In the presence of MeCN, the interaction between substrates and nanozymes gets efficiently promoted by the bridging function of cyano-group, where the utilization of Cu active sites is greatly improved due to the condensed hydrophobic substrate layers formed in the vicinity of CuV2O5 nanorods by the solvent effect of MeCN. Theoretical calculations also disclose that the addition of MeCN endows 2,4-dichlorophenol (2,4-DP) with a lower free-energy barrier in adsorption and activation on the surface of CuV2O5 nanozyme. Benefiting from the improved activity, a sensitive colorimetric sensing platform for 2,4-DP is constructed with the limit of detection as low as 0.48 μM. Our finding lays a theoretical foundation for achieving high-performance catalytical activity of the nanozymes based on the modulation of the reaction microenvironment, effectively alleviating the complex engineering process of nanozymes.

2-Methylbenzimidazole-copper nanozyme with high laccase activity for colorimetric differentiation and detection of aminophenol isomers

Laccase is well-known for its eco-friendly applications in environmental remediation and biotechnology, but its high cost and low stability have limited its practical use. Therefore, there is an urgent need to develop efficient laccase mimetics. In this study, a novel laccase-mimicking nanozyme (MBI-Cu) was successfully synthesized using 2-methylbenzimidazole (MBI) coordinated with Cu2+ by mimicking the copper active site and electron transfer pathway of natural laccase. MBI-Cu nanozyme exhibited excellent catalytic activity and higher stability than laccase, and was utilized to oxidize a series of phenolic compounds. Environmental pollutant aminophenol isomers were found to display different color in solution when catalytically oxidized by MBI-Cu, which provided a simple and feasible method to identify them by the naked eye. Based on the distinct absorption spectra of the oxidized aminophenol isomers, a colorimetric method for quantitatively detecting o-AP, m-AP, and p-AP was established, with detection limits of 0.06 μM, 0.27 μM, and 0.18 μM, respectively. Furthermore, by integrating MBI-Cu-based cotton pad colorimetric strips with smartphone and utilizing color recognition software to identify and analyze the RGB values of the images, a portable colorimetric sensing platform was designed for rapid detection of aminophenol isomers without the need for any analytical instrument. This work provides an effective reference for the design of laccase nanozymes and holds significant potential for applications in the field of environmental pollutant monitoring.

A facile and on-site sensing strategy for phenolic compounds based on a novel nanozyme with high polyphenol oxidase-like activity

Phenolic compounds (PCs) are diverse in nature and undergo complex migration and transformations in the environment, making it challenging to use techniques such as chromatography and other traditional methods to determine the concentration of PCs by separation, individual monitoring and subsequent addition. To address this issue, a facile and on-site strategy was developed to measure the concentration of PCs using a novel nanozyme with polyphenol oxidase-like activity. First, the nanozyme was designed by coordinating the asymmetric ligand nicotinic acid with copper to mimic the structure of mononuclear and trinuclear copper clusters of natural laccases. Subsequently, by introducing 2-mercaptonicotinic acid to regulate the valence state of copper, the composite nanozyme CuNA10S was obtained with significantly enhanced activity. Interestingly, CuNA10S was shown to have a broad substrate spectrum capable of catalyzing common PCs. Building upon the superior performance of this nanozyme, a method was developed to determine the concentration of PCs. To enable rapid on-site sensing, we designed and prepared CuNA10S-based test strips and developed a tailored smartphone sensing platform. Using paper strip sensors combined with a smartphone sensing platform with RGB streamlined the sensing process, facilitating rapid on-site analysis of PCs within a range of 0-100 μM. Our method offers a solution for the quick screening of phenolic wastewater at contaminated sites, allowing sensitive and quick monitoring of PCs without the need for standard samples. This significantly simplifies the monitoring procedure compared to more cumbersome large-scale instrumental methods.

Patterned Au@Ag nanoarrays with electrically stimulated laccase-mimicking activity for dual-mode detection of epinephrine

Epinephrine (EP) is a crucial neurotransmitter in the central nervous system. However, an abnormal level of EP in biological fluids can lead to various diseases. Therefore, it is essential to rapidly and accurately detect EP content. Herein, electrically stimulated patterned Au@Ag nanoarrays with laccase-mimicking activity were designed for the dual-mode detection of EP concentration. The patterned Au@Ag nanoarrays exhibit excellent electrochemical properties and electrically stimulated laccase-mimicking activity. They provide sensitive electrochemical responses for detecting EP content. Simultaneously, the Au@Ag nanoarrays can catalyze the oxidation of EP, enabling its detection through a colorimetric process. This dual-mode approach achieves the detection of EP content over a wide linear range of 0.5-200 μM, with a low detection limit of 0.152 μM. Furthermore, the utility of these nanoarrays for sensing EP in human serum was evaluated. This work provides a convenient method using patterned nanozyme array for the visible, rapid and accurate detection of EP content. It provides the important implication for the development of portable and reliable on-site analytical instruments.

Characterization of nanozyme kinetics for highly sensitive detection

Nanozymes have been widely used as enzyme substitutes. Based on a comprehensive literature survey of 261 publications, we report the significant differences in the Michaelis-Menten constants (Km) between peroxidase-mimicking nanozymes and horseradish peroxidase (HRP). Further, these differences were not considered in more than 60% of the publications for analytical developments. As a result, nanozymes' catalytic activity is limited, resulting in a potentially higher limit of detection (LOD). We used a peroxidase-mimicking Au@Pt nanozyme, which has Km for TMB comparable with HRP and three orders of magnitude higher Km for H2O2. Using the Au@Pt nanozyme as a label for immunoassays, non-optimized nanozyme substrate concentrations led to 30 times higher LOD compared to optimized conditions. The results confirm the necessity of measuring nanozymes' kinetic parameters and the corresponding adjustment of substrate concentrations for highly sensitive detection.

Biomimetic Electrochemical Sensor Based on Single-Atom Nickel Laccase Nanoenzyme for Quercetin Detection

Laccase, a member of the copper oxidase family, has been used as a green catalyst in the environmental and biochemical industries. However, laccase nanoenzymes are limited to materials with copper as the active site, and noncopper laccase nanoenzymes have been scarcely reported. In this study, inspired by the multiple copper active sites of natural laccase and the redox Cu2+/Cu+ electron transfer pathway, a novel nitrogen/nickel single-atom nanoenzyme (N/Ni SAE) with high laccase-like activity was prepared by inducing Ni and dopamine precipitation through a controllable water/ethanol interface reaction. Compared with that of laccase, the laccase activity simulated by N/Ni SAE exhibited excellent stability and reusability. The N/Ni SAE exhibited a higher efficiency toward the degradation of 2,4-dichlorophenol, hydroquinone, bisphenol A, and p-aminobenzene. In addition, a sensitive electrochemical biosensor was constructed by leveraging the laccase-like activity of N/Ni SAE; this sensor offered unique advantages in terms of catalytic activity, selectivity, stability, and repeatability. Its detection ranges for quercetin were 0.01-0.1 and 1.0-100 μM, and the detection limit was 3.4 nM. It was also successfully used for the quantitative detection of quercetin in fruit juices. Therefore, the single-atom biomimetic nanoenzymes prepared in this study promote the development of a new electrochemical strategy for the detection of various bioactive molecules and show great potential for practical applications.

Smartphone-assisted nanozyme sensor array constructed based on reaction kinetics for the discrimination and identification of phenolic compounds

Although the research on nanozymes has attracted widespread attention in recent years, the development of highly active and multifunctional nanozymes remains a challenge. Here, a bifunctional AMP-Cu nanozyme with laccase- and catecholase-like activities was successfully prepared at room temperature with Cu2+ as the metal ion and adenosine-5'-monophosphate (AMP) as the ligand molecule. Based on the excellent catalytic performance of AMP-Cu, a three-channel colorimetric sensor array was constructed using reaction kinetics as the sensing unit to achieve high-throughput detection and identification of six common phenolic compounds at low concentrations. This strategy simplifies the construction of sensor array and demonstrates the capacity to obtain multidimensional data from a single material. Finally, with the assistance of smartphones and homemade dark boxes, a portable on-site detection method for phenolic compounds was developed. This work would contribute to the development of portable sensors and the highly efficient identification of phenolic compounds in complex samples.

Recent Development of Copper-Based Nanozymes for Biomedical Applications

Copper (Cu), an indispensable trace element within the human body, serving as an intrinsic constituent of numerous natural enzymes, carrying out vital biological functions. Furthermore, nanomaterials exhibiting enzyme-mimicking properties, commonly known as nanozymes, possess distinct advantages over their natural enzyme counterparts, including cost-effectiveness, enhanced stability, and adjustable performance. These advantageous attributes have captivated the attention of researchers, inspiring them to devise various Cu-based nanomaterials, such as copper oxide, Cu metal-organic framework, and CuS, and explore their potential in enzymatic catalysis. This comprehensive review encapsulates the most recent advancements in Cu-based nanozymes, illuminating their applications in the realm of biochemistry. Initially, it is delved into the emulation of typical enzyme types achieved by Cu-based nanomaterials. Subsequently, the latest breakthroughs concerning Cu-based nanozymes in biochemical sensing, bacterial inhibition, cancer therapy, and neurodegenerative diseases treatment is discussed. Within this segment, it is also explored the modulation of Cu-based nanozyme activity. Finally, a visionary outlook for the future development of Cu-based nanozymes is presented.

Selective sensing of catechol based on a fluorescent nanozyme with catechol oxidase activity

Nanozymes, an unusual category of nanomaterials possessing enzymatic properties, and have generated considerable interest regarding their application feasibilities on several important fronts. In the present work, an innovative sensing device for catechol was established ground on a fluorescent nanozyme (Cu-BDC-NH2) that exhibited catechol oxidase activity. The fluorescent nanozyme combines both functions of catechol recognition and response signal output, and can realize the sensing of catechol without the addition of other chromogenic agents. In the existence of Cu-BDC-NH2, catechol can be oxidized efficiently to produce quinones or polymers with strong electron absorption capacity, which immediately results in efficient fluorescence quenching of Cu-BDC-NH2. However, other common phenolic compounds, such as phenol, the other two diphenols (hydroquinone and resorcinol), phloroglucinol, and chlorophenol, do not result in efficient fluorescence quenching of Cu-BDC-NH2. The method shows a nice linear relationship between catechol concentration prep the fluorescence intensity of Cu-BDC-NH2 in the scope of 0-10 μM, with a detection limit of 0.997 μM. The detection of catechol in actual water samples has also achieved the satisfactory consequences, which provides a new strategy for the convenient and selective detection of catechol.

Optimizing the Composition of the Substrate Enhances the Performance of Peroxidase-like Nanozymes in Colorimetric Assays: A Case Study of Prussian Blue and 3,3'-Diaminobenzidine

One of the emerging trends in modern analytical and bioanalytical chemistry involves the substitution of enzyme labels (such as horseradish peroxidase) with nanozymes (nanoparticles possessing enzyme-like catalytic activity). Since enzymes and nanozymes typically operate through different catalytic mechanisms, it is expected that optimal reaction conditions will also differ. The optimization of substrates for nanozymes usually focuses on determining the ideal pH and temperature. However, in some cases, even this step is overlooked, and commercial substrate formulations designed for enzymes are utilized. This paper demonstrates that not only the pH but also the composition of the substrate buffer, including the buffer species and additives, significantly impact the analytical signal generated by nanozymes. The presence of enhancers such as imidazole in commercial substrates diminishes the catalytic activity of nanozymes, which is demonstrated herein through the use of 3,3'-diaminobenzidine (DAB) and Prussian Blue as a model chromogenic substrate and nanozyme. Conversely, a simple modification to the substrate buffer greatly enhances the performance of nanozymes. Specifically, in this paper, it is demonstrated that buffers such as citrate, MES, HEPES, and TRIS, containing 1.5-2 M NaCl or NH4Cl, substantially increase DAB oxidation by Prussian Blue and yield a higher signal compared to commercial DAB formulations. The central message of this paper is that the optimization of substrate composition should be an integral step in the development of nanozyme-based assays. Herein, a step-by-step optimization of the DAB substrate composition for Prussian Blue nanozymes is presented. The optimized substrate outperforms commercial formulations in terms of efficiency. The effectiveness of the optimized DAB substrate is affirmed through its application in several commonly used immunostaining techniques, including tissue staining, Western blotting assays of immunoglobulins, and dot blot assays of antibodies against SARS-CoV-2.

Bacterial Nanocellulose/Copper as a Robust Laccase-Mimicking Bionanozyme for Catalytic Oxidation of Phenolic Pollutants

Industrial effluents containing phenolic compounds are a major public health concern and thus require effective and robust remediation technologies. Although laccase-like nanozymes are generally recognized as being catalytically efficient in oxidizing phenols, their support materials often lack resilience in harsh environments. Herein, bacterial nanocellulose (BNC) was introduced as a sustainable, strong, biocompatible, and environmentally friendly biopolymer for the synthesis of a laccase-like nanozyme (BNC/Cu). A native bacterial strain that produces nanocellulose was isolated from black tea broth fermented for 1 month. The isolate that produced BNC was identified as Bacillus sp. strain T15, and it can metabolize hexoses, sucrose, and less expensive substrates, such as molasses. Further, BNC/Cu nanozyme was synthesized using the in situ reduction of copper on the BNC. Characterization of the nanozyme by scanning electron microscopy (SEM) and X-ray diffraction (XRD) confirmed the presence of the copper nanoparticles dispersed in the layered sheets of BNC. The laccase-mimetic activity was assessed using the chromogenic redox reaction between 2,4-dichlorophenol (2,4-DP) and 4-aminoantipyrine (4-AP) with characteristic absorption at 510 nm. Remarkably, BNC/Cu has 50.69% higher catalytic activity than the pristine Cu NPs, indicating that BNC served as an effective biomatrix to disperse Cu NPs. Also, the bionanozyme showed the highest specificity toward 2,4-DP with a Km of 0.187 mM, which was lower than that of natural laccase. The bionanozyme retained catalytic activity across a wider temperature range with optimum activity at 85 °C, maintaining 38% laccase activity after 11 days and 46.77% activity after the fourth cycle. The BNC/Cu bionanozyme could efficiently oxidize more than 70% of 1,4-dichlorophenol and phenol in 5 h. Thereby, the BNC/Cu bionanozyme is described here as having an efficient ability to mimic laccase in the oxidation of phenolic compounds that are commonly released into the environment by industry.

N-doped carbon Co/CoOx with laccase-like activity for detection of epinephrine

N-doped carbon Co/CoOx with laccase-like activity was directionally designed by pyrolyzing Co-coordination polymer and applied to detect epinephrine, which revealed a new preparation strategy for laccase mimics. The formation mechanism of the N-doped carbon Co/CoOx nanozyme was reconnoitered by a thermogravimetric-mass spectrometry system (TG-MS). N-doped carbon Co/CoOx exhibited outstanding laccase-like activity, and the Michaelis-Menten constant and maximum initial velocity were calculated to be 0.087 mM and 0.0089 μM s-1, respectively. Based on this principle, a simple colorimetric sensing platform was developed for the quantitative detection of epinephrine, which can be used to diagnose pheochromocytoma. In addition, the visual platform for detecting epinephrine exhibited a linear range of 3 to 20 μg mL-1 and a calculated detection limit of 0.42 μg mL-1. Therefore, the proposed colorimetric sensing platform is a promising candidate to be applied in precise early pheochromocytoma diagnosis.

Copper nanoparticles embedded fungal chitosan as a rational and sustainable bionanozyme with robust laccase activity for catalytic oxidation of phenolic pollutants

Despite their potential for oxidation of persistent environmental pollutants, the development of rational and sustainable laccase nanozymes with efficient catalytic performance remains a challenge. Herein, fungal-produced chitosan-copper (CsCu) is proposed as a rational and sustainable bionanozyme with intrinsic laccase activity. The CsCu nanozyme was prepared by in situ reduction of copper on chitosan extracted from Irpex sp. isolate AWK2 a native fungus, from traditional fermented foods, yielding a low molecular weight chitosan with a 70% degree of deacetylation. Characterizations of the nanozyme using SEM-EDX, XRD, and XPS confirmed the presence of a multi-oxidation state copper on the chitosan matrix which is consistent with the composition of natural laccase. The laccase memetic activity was investigated using 2,4-DP as a substrate which oxidized to form a reddish-pink color with 4-AP (λmax = 510 nm). The CsCu nanozyme showed 38% higher laccase activity than the pristine Cu NPs at pH 9, indicating enhanced activity in the presence of chitosan structure. Further, CsCu showed significant stability in harsh conditions and exhibited a lower Km (0.26 mM) which is competitive with that reported for natural laccase. Notably, the nanozyme converted 92% of different phenolic substrates in 5 h, signifying a robust performance for environmental remediation purposes.

Tris-Copper Nanozyme as a Novel Laccase Mimic for the Detection and Degradation of Phenolic Compounds

Phenolic compounds are one of the main organic pollutants in the environment that can seriously affect ecosystems, even at very low concentrations. Due to the resistance of phenolic compounds to microorganisms, conventional biological treatment methods face challenges in effectively addressing this pollution problem. In this study, a novel laccase mimic (Tris-Cu nanozyme) is prepared using a simple and rapid synthesis strategy based on the coordination of copper ions and amino groups in Tris(hydroxymethyl)aminomethane (Tris). It is found that the Tris-Cu nanozyme exhibits good catalytic activity against a variety of phenolic compounds, the Km, Vmax and Kcat are determined to be 0.18 mM, 15.62 μM·min-1 and 1.57 × 107 min-1 using 2,4-dichlorophenol (2,4-DP) as the substrate, respectively. Then, based on the laccase-like activity of the Tris-Cu nanozyme, a novel colorimetric method for 2,4-DP (the limit of detection (LOD) = 2.4 μM, S/N = 3) detection in the range of 10-400 μM was established, and its accuracy was verified by analyzing tap and lake water samples. In addition, the Tris-Cu nanozyme shows excellent removal abilities for six phenolic compounds in experiments. The removal percentages for 2,4-DP, 2-chlorophenol (2-CP), phenol, resorcinol, 2,6-dimethoxyphenol (2,6-DOP), and bisphenol A (BPA) are 100%, 100%, 100%, 100%, 87%, and 81% at 1 h, respectively. In the simulated effluent, the Tris-Cu nanozyme maintains its efficient catalytic activity towards 2,4-DP, with a degradation percentage of 76.36% at 7 min and a reaction rate constant (k0) of 0.2304 min-1. Therefore, this metal-organic complex shows promise for applications in the monitoring and degrading of environmental pollutants.

Valence-Engineered Oxidase-Mimicking Nanozyme with Specificity for Aromatic Amine Oxidation and Identification

Oxidase-mimicking nanozymes with specificity for catalyzing oxidation of aromatic amines are of great significance for recognition of aromatic amines but rarely reported. Herein, Cu-A nanozyme (synthesized with Cu²⁺ as a node and adenine as a linker) could specifically catalyze oxidation of o-phenylenediamine (OPD) in Britton-Robinson buffer solution. Such a specific catalytic performance was also corroborated with other aromatic amines, such as p-phenylenediamine (PPD), 1,5-naphthalene diamine (1,5-NDA), 1,8-naphthalene diamine (1,8-NDA), and 2-aminoanthracene (2-AA). Moreover, the presence of salts (1 mM NaNO₂, NaHCO₃, NH₄Cl, KCl, NaCl, NaBr, and NaI) greatly mediated the catalytic activity with the order of NaNO₂ < blank ≈ NaHCO₃ < NH₄Cl ≈ KCl ≈ NaCl < NaBr < NaI, which was due to anions sequentially increasing interfacial Cu⁺ content via anionic redox reaction, while the effect of cations was negligible. With the increased Cu⁺ content, K_m decreased and V_max increased, indicating valence-engineered catalytic activity. Based on high specificity and satisfactory activity, a colorimetric sensor array with NaCl, NaBr, and NaI as sensing channels was constructed to identify five representative aromatic amines (OPD, PPD, 1,5-NDA, 1,8-NDA, and 2-AA) as low as 50 μM, quantitatively analyze single aromatic amine (with OPD and PPD as model analysts), and even identify 20 unknown samples with an accuracy of 100%. In addition, the performance was further validated through accurately recognizing various concentration ratios of binary, ternary, quaternary, and quinary mixtures. Finally, the practical applications were demonstrated by successfully discriminating five aromatic amines in tap, river, sewage, and sea water, providing a simple and feasible assay for large-scale scanning aromatic amine levels in environmental water samples.

One stone, two birds: A Cu-S cluster as a laccase-mimicking nanozyme and sulfite activator for phenol remediation in marine environments

Phenols are infamous pollutants in marine environments and present a grave danger to human health, which makes their efficient detection and removal serious issues. Colorimetry is a simple method for detecting phenols in water because phenols can be oxidized by natural laccase and generate a brown product. However, high cost and poor stability impede the wide-spread implementation of natural laccase in phenol detection. To reverse this adverse situation, a nanoscale Cu-S cluster, Cu₄(MPPM)₄ (Cu₄S₄, MPPM = 2-mercapto-5-n-propylpyrimidine), is synthesized. As a stable and inexpensive nanozyme, Cu₄S₄ shows excellent laccase-mimicking activity and prompts the oxidation of phenols. This characteristic makes Cu₄S₄ a perfect option for phenol detection with colorimetry. In addition, Cu₄S₄ also exhibits sulfite activation properties. It can degrade phenols and other pollutants with advanced oxidation processes (AOPs). Theoretical calculations show good laccase-mimicking and sulfite activation properties originating from appropriate interactions between Cu₄S₄ and substrates. We anticipate that the phenol detection and degradation characteristics of Cu₄S₄ make it a promising material to be used for practical phenol remediation in water environments.

Mesoporous molecularly imprinted nanoparticles with peptide mimics for the detection of phenolic compounds

Immobilized enzymes outperform free enzymes in many properties and are widely used in environmental monitoring, engineering applications, food and medical fields. Based on the developed immobilization techniques, the search for immobilization with wider applicability, lower cost and more stable enzyme properties is of significant importance. In this study, we reported a molecular imprinting strategy for immobilizing peptide mimics of DhHP-6 on mesoporous materials. The DhHP-6 molecularly imprinted polymer (MIP) showed much higher adsorption capacity than raw mesoporous silica toward DhHP-6. The DhHP-6 peptide mimics was immobilized on the surface of mesoporous silica for the fast detection of phenolic compounds, a widely spread pollutant with highly toxic and difficult in degradation. Immobilized enzyme of DhHP-6-MIP exhibited higher peroxidase activity, better stability, and recyclability than free peptide. Notably, DhHP-6-MIP showed excellent linearity for the detection of the two phenols with detection limits of 0.28 μM and 0.25 μM, respectively. In combination with the spectral analysis and PCA method, DhHP-6-MIP provided better discrimination between the six phenolic compounds (phenol, catechol, resorcinol, hydroquinone, 2-chlorophenol, 2, 4-dichlorophenol). Our study showed that immobilization of peptide mimics by the molecular imprinting strategy using mesoporous silica as carriers was a simple and effective approach. The DhHP-6-MIP has great potentiality for the monitoring and degradation of environmental pollutants.

Supramolecular assembly of benzophenone alanine and copper presents high laccase-like activity for the degradation of phenolic pollutants

Laccases are multicopper oxidases of significant importance for the degradation of phenolic pollutants. Because of the inherent defects of natural laccases in practical applications, herein, we discovered highly effective and non-cytotoxic laccase-like metallo-nanofibers based on the supramolecular assembly of single unnatural amino acid, benzophenone-alanine (BpA), in combination with copper ions. Structural analysis revealed that the catalytic BpA-Cu nanofibers possess a Cu(I)-Cu(II) electron transfer system similar to that in natural laccase. Our BpA-Cu nanofibers exhibit 4 times higher substrate affinity and 24% higher catalytic efficiency than the well-known high-performance industrialized laccase (Novozym 51003) in 2,4-dichlorophenol degradation. In addition, the BpA-Cu nanofibers were demonstrated to be stable (&gt;75% residual activity) in long-term storage at a wide range of pH, ionic strength, temperature, ethanol, and water sample, and to be readily recovered for pollutant degradation, keeping 83% of the laccase activity after 10 catalytic recycles. Remarkably, the nanofibers displayed a wide substrate spectrum, detecting and degrading a variety of phenolic pollutants with high activity than other laccase mimics reported in the literature. Furthermore, the biocompatibility of the material was proved with cultured cells. These findings demonstrated the potential of BpA-Cu nanofibers in mimicking laccases for environmental remediation.