Designing an electrochemical sensor based on ZnO nanoparticle-supported molecularly imprinted polymer for ultra-sensitive and selective detection of sorafenib

A molecularly imprinted electrochemical sensor based on in-situ polymerization for rapid and selective detection of tonalide in aqueous environment

Given the adverse effects of tonalide (AHTN) on aquatic organisms and humans, coupled with the limitations of current detection methods, which are time-consuming, require expensive equipment and complicated sample preparation procedures, there is a clear need to develop a new technique for detecting AHTN that is highly sensitive, rapid, cost-effective and efficient. In this study, a new simple electrochemical sensor for the determination of AHTN in aqueous environments was developed for the first time through the in-situ polymerization of an AHTN-imprinted polymer on the surface of a graphene (G)-modified carbon electrode (GCE). Following a series of comparative tests, including cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), the novel AHTN molecularly imprinted sensor (AHTN-MIP/G/GCE) has been demonstrated to be an effective tool for monitoring AHTN. The results demonstrate that the linear detection range of the current response of the AHTN-MIP/G/GCE 1electrode to AHTN was 0.01 μM-4 μM (i.e., 2.584 μg/L-1033.6 μg/L), with a detection limit of 2.3 × 10⁻⁹ M (i.e., 594.32 ng/L), following the optimization of the experimental conditions. Furthermore, the new sensor was successfully employed for the detection of AHTN in water samples, with recoveries of 97.1%-108.2 % with the added standards. Consequently, the new electrochemical sensor demonstrated good stability and acceptable reproducibility. This study provides a new method for the future detection of AHTN in the aqueous environment.

Selective apigenin assay in plant extracts and herbal supplement with molecularly imprinted polymer-based electrochemical sensor

This study is the first successful application of a nanomaterial-supported molecularly imprinted polymer (MIP)-based electrochemical sensor for the sensitive and selective determination of apigenin (API), which is a naturally occurring product of the flavone class that is an aglycone of several glycosides. Secondary metabolites are biologically active substances produced by plants in response to various environmental factors. The levels of these compounds can vary depending on factors such as climate, soil conditions and the season in which the plants are grown. Therefore, the analysis of these compounds is essential to properly understand the biological effects of plant extracts and to ensure their safe use. To increase the glassy carbon electrode (GCE) surface's active surface area and porosity, zinc oxide nanoparticles (ZnO NPs) were integrated into the MIP-based electrochemical sensor design. Tryptophan methacrylate (TrpMA) was selected as the functional monomer along with other MIP components such as 2-hydroxyethyl methacrylate (HEMA, basic monomer), 2-hydroxy-2-methylpropiophenone (initiator), and ethylene glycol dimethacrylate (EGDMA, crosslinking agent). The morphological and electrochemical characterizations of the developed API/ZnO NPs/TrpMA@MIP-GCE sensor were performed with scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The indirect measurement approach via 5.0 mM [Fe(CN)6]3-/4- solution was utilized to determine API in the linear range of 1.0x10-13 M - 1.0x10-12 M. The limit of detection (LOD) and limit of quantification (LOQ) for standard solutions were found to be 2.47x10-14 and 8.23x10-14 M, respectively. In addition, the extraction processes were carried out using ultrasound-assisted extraction (UAE) and maceration (MCR) procedures. For Apium graveolens L., Petroselinum crispum (Mill.) Fuss and herbal supplement, the API recoveries varied from 98.79 % to 102.71 %, with average relative standard deviations (RSD) less than 2.25 % in all three cases. The sensor's successful performance in the presence of components with chemical structures similar to the API was also demonstrated, revealing its unique selectivity.

Design of a molecularly imprinted polymer sensor modified with saffron-based copper nanoflowers for highly selective and sensitive determination of bortezomib

This work represents the first successful application of a molecularly imprinted polymer (MIP)-based electrochemical sensor for the sensitive and selective determination of the first developed proteasome inhibitor, bortezomib (BOR). BOR is used for the treatment of multiple myeloma, gastrointestinal stromal tumors, and mantle cell lymphoma. It shows its desired effect through the boronate group and can be administered intravenously or subcutaneously. The MIP-based electrochemical sensor design includes the integration of green-synthesized saffron-based copper nanoflowers (CuNFs) from Crocus sativus L. to increase the active surface area and porosity of the glassy carbon electrode (GCE) surface. 2-Acrylamido-2-methyl-1-propanesulfonic acid (AMPS) was selected as the functional monomer along with other MIP components. Detailed characterizations of the developed CuNFs/AMPS/MIP-GCE sensor and CuNFs were performed using scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray analysis (EDX), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The indirect measurement approach using 5.0 mM [Fe(CN)6]3-/4- solution was used to determine BOR in the linear range of 2.5 × 10-13 M - 2.5 × 10-12 M (0.25-2.5 pM). The LOD and LOQ values of the sensor obtained at the fM level (29 fM and 96.7 fM), which has a linear response in the commercial human serum sample in the same concentration range, emphasize its sensitivity (1.89 × 1013 and 2.14 × 1013 μA/M for standard solution and serum). The repeatability and reproducibility of the sensor were between 0.87 % and 2.17 %, showing its reliability. The successful performance of the sensor in the presence of metabolites belonging to BOR demonstrates its unique selectivity. The selectivity was demonstrated via relative imprinting factor (IF') values (higher than 3.5) against BOR's metabolites. The stability of the CuNFs/AMPS/MIP-GCE sensor was found to be 5 days.

Fabrication of a molecularly imprinted polymer-based electrochemical sensor for the selective assay of antipsychotic drug clozapine and performance comparison with LC-MS/MS

Clozapine (CLO) is an atypical antipsychotic drug indicated for the treatment of schizophrenia. The treatment effectiveness of CLO is better than that of other atypical antipsychotics, and it has the advantage of being able to determine its effectiveness by measuring its concentration in the patient's blood. Thus, sensitive, selective, and accurate determination of CLO in blood is highly significant for treatment monitoring. This study describes the design and fabrication of a molecularly imprinted polymer (MIP)-based electrochemical sensor for CLO determination. This is the first MIP-based electrochemical application in the literature for CLO determination. Employing the thermal polymerization approach, the MIP was formed on the glassy carbon electrode (GCE) using CLO as the template, trans-3-(3-Pyridyl)acrylic acid (3,3-TA) as the functional monomer, and the support of zinc oxide nanoparticles (ZnO NPs). Elaborate characterizations in terms of surface morphology and electrochemistry were performed via scanning electron microscopy (SEM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) methods. An indirect approach was employed to determine CLO in standard solution, real human biological samples, and tablet formulation, using 5 × 10-3 M [Fe(CN)6]3-/4- solution as the redox probe. The limit of detection (LOD) values for the standard solution and serum sample were calculated as 2.9 × 10-11 M and 6.01 × 10-12 M, respectively. These values and recovery studies confirmed the sensor's sensitivity and feasibility. The measurements in the presence of similarly structured compounds (olanzapine and quetiapine fumarate) verified the sensor's superior selectivity. Moreover, the developed sensor's performance was compared and verified using an LC-MS/MS method using the student's t-test and F-test.

Designing a molecularly imprinted polymer-based electrochemical sensor for the sensitive and selective detection of the antimalarial chloroquine phosphate

For the first time an electrochemical sensor based on nanomaterial-supported molecularly imprinted polymers (MIPs) is applied to the sensitive and specific determination of chloroquine phosphate (CHL). The sensor was produced using an electropolymerization (EP) approach, and it was formed on a glassy carbon electrode (GCE) using CHL as a template and 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS) and aniline (ANI) as functional monomers. Incorporating Prussian blue polyethyleneglycol-amine nanoparticles (PB@PEG-NH2) in the MIP-based electrochemical sensor increased the active surface area and porosity. The developed CHL/AMPS-PANI/PB@PEG-NH2/MIP-GCE sensor was characterized morphologically and electrochemically using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and scanning electron microscopy (SEM). The indirect measurement of CHL was accomplished in 5.0 mmol L-1 [Fe(CN)6]-3/-4 solution using differential pulse voltammetry, displaying linear response between 1.75 × 10-12 and 2.50 × 10-13 M, and limits of detection (LOD) and quantitation (LOQ) of 6.68 × 10-14 M and 2.23 × 10-13 M, respectively, in standard solutions. CHL recoveries in spiked serum and tablet form ranged from 99.13 to 101.51%, while the relative standard deviations (RSD%) were below 2.41% in both types of samples. In addition, the sensor's excellent selectivity was successfully demonstrated in the presence of components with a chemical structure similar to CHL.

A novel ratiometric electrochemical sensing platform combined with molecularly imprinted polymer and Fe-MOF-NH2/CNTs-NH2/MXene composite for efficient detection of ofloxacin

BACKGROUND

Ofloxacin (OFL) is often abused in medicine and animal husbandry, which poses a great threat to human health and ecological environment. Therefore, it is necessary to establish efficient method to detect OFL. Electrochemical sensor has attracted widespread attention due to the advantages of low cost and fast response. However, most electrochemical sensors usually use one response signal to detect the target, which makes it sensitive to the variable background noise in the complex environment, resulting in low robustness and selectivity. The ratio detection mode and employing molecularly imprinted polymer (MIP) are two strategies to solve these problems.

RESULTS

A novel molecular imprinting polymer-ratiometric electrochemical sensor (MIP-RECS) based on Fe-MOF-NH2/CNTs-NH2/MXene composite was prepared for the rapid and sensitive detection of OFL. The positively charged Fe-MOF-NH2 and CNTs-NH2 as interlayer spacers were introduced into the negatively charged MXene through a simple electrostatic self-assembly technique, which effectively prevented the agglomeration of MXene and increased the electrocatalytic activity. A glass carbon electrode was modified by the composite and a MIP film was electropolymerized on it using o-phenylenediamine and β-cyclodextrin as bifunctional monomers and OFL as template. Then a MIP-RECS was designed by adding dopamine (DA) into the electrolyte solution as internal reference, and OFL was quantified by the response current ratio of OFL to DA. The current ratio and the concentration of OFL displayed a satisfying linear relationship in the range of 0.1 μM-100 μM, with a limit of detection (LOD) of 13.2 nM.

SIGNIFICANCE

Combining molecular imprinting strategy and ratio strategy, the MIP-RECS has impressive selectivity compared with the non-imprinted polymer-RECS, and has better repeatability and reproducibility than non-ratiometric sensor. The MIP-RECS has high sensitivity and accuracy, which was applied for the detection of OFL in four different brands of milk and was verified by HPLC method with satisfactory results.

Plant-based zinc nanoflowers assisted molecularly imprinted polymer for the design of an electrochemical sensor for selective determination of abrocitinib

The first electrochemical sensor application in the literature is described for the sensitive and selective determination of the selective Janus kinase (JAK)-1 inhibitor abrocitinib (ABR). ABR is approved by the U.S. Food and Drug Administration (FDA) for the treatment of atopic dermatitis. The molecularly imprinted polymer (MIP)-based sensor was designed to incorporate zinc nanoflower (ZnNFs)-graphene oxide (GO) conjugate (ZnNFs@GO), synthesized from the root methanolic extract (RME) of the species Alkanna cappadocica Boiss. et Bal. to improve the porosity and effective surface area of the glassy carbon electrode (GCE). Furthermore, the MIP structure was prepared using ABR as a template molecule, 4-aminobenzoic acid (4-ABA) as a functional monomer, and other additional components. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) were used to characterize the surface and structure of the synthesized nanomaterial and MIP-based surface. Among the electrochemical methods, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were preferred for detailed electrochemical characterization, and differential pulse voltammetry (DPV) was preferred for all other electrochemical measurements using 5.0 mM [Fe(CN)6]3-/4- solution as the redox probe. The MIP-based sensor, which was the result of a detailed optimization phase, gave a linear response in the 1.0 × 10-13 - 1.0 × 10-12 M range in standard solution and serum sample. The obtained limit of detection (LOD) and limit of quantification (LOQ) values and recovery studies demonstrated the sensitivity, accuracy, and applicability of the sensor. Selectivity, the most important feature of the MIP-based sensor, was verified by imprinting factor calculations using ibrutinib, ruxolitinib, tofacitinib, zonisamide, and acetazolamide.

The sensor applications for prostate and lung cancer biomarkers in terms of electrochemical analysis

Prostate and lung cancers are the most common types of cancer and affect a large part of the population around the world, causing deaths. Therefore, the rapid identification of cancer can profoundly impact reducing cancer-related death rates and protecting human lives. Significant resources have been dedicated to investigating new methods for early disease detection. Cancer biomarkers encompass various biochemical entities, including nucleic acids, proteins, sugars, small metabolites, cytogenetic and cytokinetic parameters, and whole tumor cells in bodily fluids. These tools can be utilized for various purposes, such as risk assessment, diagnosis, prognosis, treatment efficacy, toxicity evaluation, and predicting a return. Due to these versatile and critical purposes, there are widespread studies on the development of new, sensitive, and selective approaches for the determination of cancer biomarkers. This review illustrates the significant lung and prostate cancer biomarkers and their determination utilizing electrochemical sensors, which have the advantage of improved sensitivity, low cost, and simple analysis. Additionally, approaches such as improving sensitivity with nanomaterials and ensuring selectivity with MIPs are used to increase the performance of the sensor. This review aims to overview the most recent electrochemical biosensor applications for determining vital biomarkers of prostate and lung cancers in terms of nanobiosensors and molecularly imprinted polymer (MIP)-based biosensors.

A novel electrochemical sensor based on a molecularly imprinted polymer for highly selective and sensitive determination of rutin from herbal supplements and plant extracts

Rutin (RUT), a natural flavonoid with various beneficial pharmacological actions such as cardioprotective, antioxidant, anti-inflammatory, neuroprotective, etc., is found in the content of many plants that are consumed daily. Due to the healthful effects, RUT is also included in the composition of various herbal supplement samples. Therefore, it is highly important to develop a sensor with high selectivity and sensitivity to determine RUT in complex samples. In this study, it was aimed to take advantage of the cheap, easy, and sensitive nature of electrochemistry and, in addition, to improve the selectivity. For this purpose, the functional monomer selected in the fabricated molecularly imprinted polymer (MIP) was N-methacryloyl-L-aspartic acid (MA-Asp) while photopolymerization (PP) was applied as the polymerization route. After completing critical optimization steps, the developed sensor (MA-Asp@RUT/MIP-GCE) was characterized electrochemically and morphologically. As a result of analytical performance evaluation in standard solution, the linear response of the sensor was found in the concentration range between 1 and 10 pM with a detection limit of 0.269 pM. The recovery studies from plant extract and commercial herbal supplement samples emphasized accuracy and applicability. In imprinting factor studies figuring out quite good selectivity, molecules with a structure similar to RUT were selected as competitors to prove the affinity of the sensor against RUT. Consequently, the MA-Asp@RUT/MIP-GCE sensor offers a more sensitive and selective method thanks to its indirect analysis approach and also stands out with the diversity of its real sample application compared to other available studies.

Development of a molecularly imprinted polymer on silanized graphene oxide for the detection of 17-estradiol in wastewater

This research article demonstrates the synthesis, characterization, and electrochemical evaluation of a molecularly imprinted polymer (MIP) on the surface of silanized graphene oxide (silanized GO), which is nanostructured and used to quantify 17-estradiol (E2) in wastewater. As characterization methods, X-ray diffraction (XRD), Raman spectroscopy, dynamic scattering light (DSL), scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR) were utilized to examine the synthesized GO, silanized GO, MIP-GO composite, and non-imprinted polymer (NIP)-GO (NIP-GO) composite. FTIR results confirmed the successful synthesis of GO composites. Raman study confirmed the synthesis of monolayer silanized GO, MIP-GO composite, and NIP-GO composite. Surface morphology revealed that after polymerization, the surface of silanized GO sheet-like morphology is covered with nanoparticles. Adsorption kinetics studies revealed that adsorption follows the pseudo-second-order kinetics. Further, we studied the performance of a MIP-GO-based sensor by optimizing the effects of pH, scan rate, and incubation period. The linear calibration was achieved between the oxidation peak current and E2 concentration from 0.1 to 0.81 ppm, with a detection limit of 0.037 ppm. The selectivity of the MIP-GO composite was also checked by using other estrogens, and it was found that E2 is 3.3, 0.5, and 1.4 times more selective than equilin, estriol, and estrone, respectively. The composite was successfully applied to the wastewater samples for the detection of E2, and a good percentage of recoveries were achieved. It suggests that the reported composite can be applied to real samples. PRACTITIONER POINTS: An innovative electrochemical sensor was developed for selective detection of 17-estradiol through molecularly imprinted polymer fabricated on the surface of silanized GO (MIP-GO composite). The developed method was comprehensively validated and found to be linear in the range of 0.1 to 0.8 ppm of 17-estradiol, with 0.037 ppm of limit of detection and 0.1 ppm of limit of quantification, respectively. The developed MIP-GO-composite-based electrochemical sensor was found 3.3, 0.5, and 1.4 times more selective for 17-estradiol than equiline, estriol, and estrone, respectively. The applicability of a developed sensor was also checked on wastewater samples, and a good percent recovery was obtained.

The Effect of Polymerization Techniques on the Creation of Molecularly Imprinted Polymer Sensors and Their Application on Pharmaceutical Compounds

Molecularly imprinted polymers (MIPs) have become more prevalent in fabricating sensor applications, particularly in medicine, pharmaceuticals, food quality monitoring, and the environment. The ease of their preparation, adaptability of templates, superior affinity and specificity, improved stability, and the possibility for downsizing are only a few benefits of these sensors. Moreover, from a medical perspective, monitoring therapeutic medications and determining pharmaceutical compounds in their pharmaceutical forms and biological systems is very important. Additionally, because medications are hazardous to the environment, effective, quick, and affordable determination in the surrounding environment is of major importance. Concerning a variety of performance criteria, including sensitivity, specificity, low detection limits, and affordability, MIP sensors outperform other published technologies for analyzing pharmaceutical drugs. MIP sensors have, therefore, been widely used as one of the most crucial techniques for analyzing pharmaceuticals. The first part of this review provides a detailed explanation of the many polymerization techniques that were employed to create high-performing MIP sensors. In the subsequent section of the review, the utilization of MIP-based sensors for quantifying the drugs in their pharmaceutical preparation, biological specimens, and environmental samples are covered in depth. Finally, a critical evaluation of the potential future research paths for MIP-based sensors clarifies the use of MIP in pharmaceutical fields.