Initial clinical experience with microwave breast imaging in women with normal mammography

A novel textile-based UWB patch antenna for breast cancer imaging

Breast cancer is the second leading cause of death for women worldwide, and detecting cancer at an early stage increases the survival rate by 97%. In this study, a novel textile-based ultrawideband (UWB) microstrip patch antenna was designed and modeled to work in the 2-11.6 GHz frequency range and a simulation was used to test its performance in early breast cancer detection. The antenna was designed with an overall size of 31*31 mm2 using a denim substrate and 100% metal polyamide-based fabric with copper, silver, and nickel to provide comfort for the wearer. The designed antenna was tested in four numerical breast models. The models ranged from simple tumor-free to complex models with small tumors. The size, structure, and position of the tumor were modified to test the suggested ability of the antenna to detect cancers with different shapes, sizes, and positions. The specific absorption rate (SAR), return loss (S11), and voltage standing wave ratio (VSWR) were calculated for each model to measure the antenna performance. The simulation results showed that SAR values were between 1.6 and 2 W/g (10 g SAR) and were within the allowed range for medical applications. Additionally, the VSWR remained in an acceptable range from 1.15 to 2. Depending on the size and location of the tumor, the antenna return losses of the four models ranged from - 36 to - 18.5 dB. The effect of bending was tested to determine the flexibility. The antenna proved to be highly effective and capable of detecting small tumors with diameters of up to 2 mm.

Repository of MRI-derived models of the breast with single and multiple benign and malignant tumors for microwave imaging research

The diagnosis of breast cancer through MicroWave Imaging (MWI) technology has been extensively researched over the past few decades. However, continuous improvements to systems are needed to achieve clinical viability. To this end, the numerical models employed in simulation studies need to be diversified, anatomically accurate, and also representative of the cases in clinical settings. Hence, we have created the first open-access repository of 3D anatomically accurate numerical models of the breast, derived from 3.0T Magnetic Resonance Images (MRI) of benign breast disease and breast cancer patients. The models include normal breast tissues (fat, fibroglandular, skin, and muscle tissues), and benign and cancerous breast tumors. The repository contains easily reconfigurable models which can be tumor-free or contain single or multiple tumors, allowing complex and realistic test scenarios needed for feasibility and performance assessment of MWI devices prior to experimental and clinical testing. It also includes an executable file which enables researchers to generate models incorporating the dielectric properties of breast tissues at a chosen frequency ranging from 3 to 10 GHz, thereby ensuring compatibility with a wide spectrum of research requirements and stages of development for any breast MWI prototype system. Currently, our dataset comprises MRI scans of 55 patients, but new exams will be continuously added.

Microwave imaging for monitoring breast cancer treatment: A pilot study

BACKGROUND

Microwave imaging has been proposed for medical applications, creating maps related to water content of tissues. Breast imaging has emerged as a key application because the signals can be coupled directly into the breast and experience limited attenuation in fatty tissues. While the literature contains reports of tumor detection with microwave approaches, there is limited exploration of treatment monitoring.

PURPOSE

This study aims to detect treatment-related changes in breast tissue with a low-resolution microwave scanner.

METHODS

Microwave scans of 15 patients undergoing treatment for early-stage breast cancer are collected at up to 4 time points: after surgery (baseline), 6 weeks after accelerated partial breast radiation, as well as 1 and 2 years post-treatment. Both the treated and untreated breast are scanned at each time point. The microwave scanner consists of planar transmit and receive arrays and uses signals from 0.1 to 10 GHz. The average microwave frequency properties (permittivity) are calculated for each scan to enable quantitative comparison. Baseline and 6-week results are analyzed with a two-way ANOVA with blocking.

RESULTS

Consistent properties are observed for the untreated breast over time, similar to a previous study. Comparison of the scans of the treated and untreated breast suggests increased properties related to treatment, particularly at baseline and 6-weeks following radiotherapy. Analysis of the average properties of the scans with ANOVA indicates statistically significant differences (p < 0.05 $p < 0.05$ ) in the treated and untreated breast at these time points.

CONCLUSIONS

Microwave imaging has the potential to track treatment-related changes in breast tissues.

Microwave Breast Lesion Classification - Results from Clinical Investigation of the SAFE Microwave Breast Cancer System

RATIONALE AND OBJECTIVES

Microwave breast cancer imaging (MWI) is an emerging non-invasive technology used to clinically assess the internal breast tissue inhomogeneity. MWI utilizes the variance in dielectric properties of healthy and cancerous tissue to identify anomalies inside the breast and make further clinical predictions. In this study, we evaluate our SAFE MWI system in a clinical setting. Capability of SAFE to provide breast pathology is assessed.

MATERIALS AND METHODS

Patients with BI-RADS category 4 or 5 who were scheduled for biopsy were included in the study. Machine learning approach, more specifically the Adaptive Boosting (AdaBoost) model, was implemented to determine if the level of difference between backscattered signals of breasts with the benign and malignant pathological outcome is significant enough for quantitative breast health classification via SAFE.

RESULTS

A dataset of 113 (70 benign and 43 malignant) breast samples was used in the study. The proposed classification model achieved the sensitivity, specificity, and accuracy of 79%, 77%, and 78%, respectively.

CONCLUSION

The non-ionizing and non-invasive nature gives SAFE an opportunity to impact breast cancer screening and early detection positively. Device classified both benign and malignant lesions at a similar rate. Further clinical studies are planned to validate the findings of this study.

Microwave Imaging and Sensing Techniques for Breast Cancer Detection

Medical imaging techniques, including X-ray mammography, ultrasound, and magnetic resonance imaging, play a crucial role in the timely identification and monitoring of breast cancer. However, these conventional imaging modalities have their limitations, and there is a need for a more accurate and sensitive alternative. Microwave imaging has emerged as a promising technique for breast cancer detection due to its non-ionizing, non-invasive, and cost-effective nature. Recent advancements in microwave imaging and sensing techniques have opened up new possibilities for the early diagnosis and treatment of breast cancer. By combining microwave sensing with machine learning techniques, microwave imaging approaches can rapidly and affordably identify and classify breast tumors. This manuscript provides a comprehensive overview of the latest developments in microwave imaging and sensing techniques for the early detection of breast cancer. It discusses the principles and applications of microwave imaging and highlights its advantages over conventional imaging modalities. The manuscript also delves into integrating machine learning algorithms to enhance the accuracy and efficiency of microwave imaging in breast cancer detection.

Microwave Imaging Based on a Subspace-based Two-step Iterative Shrinkage/Thresholding Method

This paper presents a subspace-based two-step iterative shrinkage/thresholding method(S-TwIST) based on the Distorted Born iterative method (DBIM) to improve the performance of the original TwIST inverse algorithm. This method retrieves the deterministic part of the induced current from inhomogeneous Green's function operator leading to more accurate total field calculation at each iteration step than that of the original TwIST. Both inverse algorithms have been evaluated with a set of synthetic geometries with fine structures. Compared with TwIST, the results show that S-TwIST has superior accuracy in multiple objects profile (εerr=0.1454%) and 1/16λ resolution at 2GHz. Also, S-TwIST is more robust to initial guess, which means it is less likely to become unstable when the inversion procedure starts without initial guess.

Review and Analysis of Tumour Detection and Image Quality Analysis in Experimental Breast Microwave Sensing

This review evaluates the methods used for image quality analysis and tumour detection in experimental breast microwave sensing (BMS), a developing technology being investigated for breast cancer detection. This article examines the methods used for image quality analysis and the estimated diagnostic performance of BMS for image-based and machine-learning tumour detection approaches. The majority of image analysis performed in BMS has been qualitative and existing quantitative image quality metrics aim to describe image contrast-other aspects of image quality have not been addressed. Image-based diagnostic sensitivities between 63 and 100% have been achieved in eleven trials, but only four articles have estimated the specificity of BMS. The estimates range from 20 to 65%, and do not demonstrate the clinical utility of the modality. Despite over two decades of research in BMS, significant challenges remain that limit the development of this modality as a clinical tool. The BMS community should utilize consistent image quality metric definitions and include image resolution, noise, and artifacts in their analyses. Future work should include more robust metrics, estimates of the diagnostic specificity of the modality, and machine-learning applications should be used with more diverse datasets and with robust methodologies to further enhance BMS as a viable clinical technique.

Radiation-Free Microwave Technology for Breast Lesion Detection Using Supervised Machine Learning Model

Mammography is the gold standard technology for breast screening, which has been demonstrated through different randomized controlled trials to reduce breast cancer mortality. However, mammography has limitations and potential harms, such as the use of ionizing radiation. To overcome the ionizing radiation exposure issues, a novel device (i.e. MammoWave) based on low-power radio-frequency signals has been developed for breast lesion detection. The MammoWave is a microwave device and is under clinical validation phase in several hospitals across Europe. The device transmits non-invasive microwave signals through the breast and accumulates the backscattered (returned) signatures, commonly denoted as the S21 signals in engineering terminology. Backscattered (complex) S21 signals exploit the contrast in dielectric properties of breasts with and without lesions. The proposed research is aimed to automatically segregate these two types of signal responses by applying appropriate supervised machine learning (ML) algorithm for the data emerging from this research. The support vector machine with radial basis function has been employed here. The proposed algorithm has been trained and tested using microwave breast response data collected at one of the clinical validation centres. Statistical evaluation indicates that the proposed ML model can recognise the MammoWave breasts signal with no radiological finding (NF) and with radiological findings (WF), i.e., may be the presence of benign or malignant lesions. A sensitivity of 84.40% and a specificity of 95.50% have been achieved in NF/WF recognition using the proposed ML model.

Single slice microwave imaging of breast cancer by reverse time migration

PURPOSE

Microwave imaging of breast cancer is considered and a new microwave imaging prototype including the imaging algorithm, the antenna array, and the measurement configuration is presented. The prototype aims to project the geometrical features of the anomalies inside the breast to a single-slice image at the coronal plane depending on the complex dielectric permittivity variation among the tissues to aid the diagnosis.

METHODS

The imaging prototype uses a solid cylindrical dielectric platform, where a total of 24 optimized Vivaldi antennas are embedded inside to form a uniform circular antenna array. The center of the platform is carved to create a hollow part for placement of the breast and the multi-static, microwave scattering parameters are collected with the antenna array around the hollow center. The dielectric platform further enhances the microwave impedance matching against the breast fat tissue and preserves the vertical polarization during the measurements. In the imaging phase, a computationally efficient inverse electromagnetic scattering method - reverse time migration - is considered and adapted in terms of scattering parameters to comply with the actual measurements.

RESULTS

The prototype system is experimentally tested against tissue-mimicking breast phantoms with realistic dielectric permittivity profiles. The reconstructed single-slice images accurately determined the locations and the geometrical extents of the tumor phantoms. These experiments not only verified the microwave imaging prototype but also provided the first experimental results of the imaging algorithm.

CONCLUSIONS

The presented prototype system implementing the reverse time migration method is capable of reconstructing single-slice, non-anatomical images, where the hotspots correspond to the geometrical projections of the anomalies inside the breast. This article is protected by copyright. All rights reserved.

Automated breast lesion localisation in microwave imaging employing simplified pulse coupled neural network

MammoWave is a microwave imaging device for breast lesion detection, employing two antennas which rotate azimuthally (horizontally) around the breast. The antennas operate in the 1-9 GHz band and are set in free space, i.e., pivotally, no matching liquid is required. Microwave images, subsequently obtained through the application of Huygens Principle, are intensity maps, representing the homogeneity of the dielectric properties of the breast tissues under test. In this paper, MammoWave is used to realise tissues dielectric differences and localise lesions by segmenting microwave images adaptively employing pulse coupled neural network (PCNN). Subsequently, a non-parametric thresholding technique is modelled to differentiate between breasts having no radiological finding (NF) or benign (BF) and breasts with malignant finding (MF). Resultant findings verify that automated breast lesion localization with microwave imaging matches the gold standard achieving 81.82% sensitivity in MF detection. The proposed method is tested on microwave images acquired from a feasibility study performed in Foligno Hospital, Italy. This study is based on 61 breasts from 35 patients; performance may vary with larger number of datasets and will be subsequently investigated.

Microwave Imaging for Early Breast Cancer Detection: Current State, Challenges, and Future Directions

Breast cancer is the most commonly diagnosed cancer type and is the leading cause of cancer-related death among females worldwide. Breast screening and early detection are currently the most successful approaches for the management and treatment of this disease. Several imaging modalities are currently utilized for detecting breast cancer, of which microwave imaging (MWI) is gaining quite a lot of attention as a promising diagnostic tool for early breast cancer detection. MWI is a noninvasive, relatively inexpensive, fast, convenient, and safe screening tool. The purpose of this paper is to provide an up-to-date survey of the principles, developments, and current research status of MWI for breast cancer detection. This paper is structured into two sections; the first is an overview of current MWI techniques used for detecting breast cancer, followed by an explanation of the working principle behind MWI and its various types, namely, microwave tomography and radar-based imaging. In the second section, a review of the initial experiments along with more recent studies on the use of MWI for breast cancer detection is presented. Furthermore, the paper summarizes the challenges facing MWI as a breast cancer detection tool and provides future research directions. On the whole, MWI has proven its potential as a screening tool for breast cancer detection, both as a standalone or complementary technique. However, there are a few challenges that need to be addressed to unlock the full potential of this imaging modality and translate it to clinical settings.

A Versatile and Shelf-Stable Dielectric Coupling Medium for Microwave Imaging

OBJECTIVE

To develop a new class of emulsions using a protein-based emulsifier as the coupling fluid for microwave imaging systems.

METHODS

In this paper, we provide a theoretical basis for engineering shelf-stable dielectric fluids, a step-by-step formulation method, and measurements of complex dielectric properties in the frequency range of 0.5-3 GHz, which can be applicable for many of the recent microwave imaging systems.

RESULTS

This medium was primarily designed for long-term stability while providing a controllable range of complex dielectric permittivities given different fractions of its constituents. Consequently, this emulsion shows dielectric stability in open air throughout a 7-day experiment and temperature insensitivity over the range of 0 to 60 Celsius degree.

CONCLUSIONS

This control over dielectric permittivity enables formulations that tune the background-to-target contrast to the linearizable regime of iterative inverse scattering algorithms. Accordingly, the emulsion conductivity can also be controlled and reduced to maintain the required signal-to-noise ratio within the dynamic range of the imaging system. The new formulation overcomes the practical challenges of engineering coupling fluids for microwave imaging systems, e.g., temporal stability, non-toxic, low sensitivity to temperature variation, and easy formulation from readily available and inexpensive materials.

SIGNIFICANCE

The achieved properties associated with this new fluid are of particular benefit to microwave imaging systems used in thermal therapy monitoring.

Microwave Imaging in Breast Cancer - Results from the First-In-Human Clinical Investigation of the Wavelia System

RATIONALE AND OBJECTIVES

Microwave Breast Imaging (MBI) is an emerging non-ionising technology with the potential to detect breast pathology. The investigational device considered in this article is a low-power electromagnetic wave MBI prototype that demonstrated the ability to detect dielectric contrast between tumour phantoms and synthetic fibroglandular tissue in preclinical studies. Herein, we evaluate the MBI system in the clinical setting. The capacity of the MBI system to detect and localise breast tumours in addition to benign breast pathology is assessed. Secondly, the safety profile and patient experience of this device is established.

MATERIALS AND METHODS

Female patients were recruited from the symptomatic unit to 1 of 3 groups: Biopsy-proven breast cancers (Group-1), unaspirated cysts (Group-2) and biopsy-proven benign breast lesions (Group-3). Breast Density was determined by Volpara VDM (Volumetric Density Measurement) Software. MBI, radiological, pathological and histological findings were reviewed. Subjects were surveyed to assess patient experience.

RESULTS

A total of 25 patients underwent MBI. 24 of these were included in final data analysis (11 Group-1, 8 Group-2 and 5 Group-3). The MBI system detected and localised 12 of 13 benign breast lesions, and 9 out of the 11 breast cancers. This included 1 case of a radiographically occult invasive lobular cancer. No device related adverse events were recorded. 92% (n = 23) of women reported that they would recommend MBI imaging to other women.

CONCLUSION

The MBI system detected and localized the majority of breast lesions. This modality may have the potential to offer a non-invasive, non-ionizing and painless adjunct to breast cancer diagnosis. Further larger studies are required to validate the findings of this study.

Assessing Patient-Specific Microwave Breast Imaging in Clinical Case Studies

Microwave breast imaging has seen increasing use in clinical investigations in the past decade with over eight systems having being trialled with patients. The majority of systems use radar-based algorithms to reconstruct the image shown to the clinician which requires an estimate of the dielectric properties of the breast to synthetically focus signals to reconstruct the image. Both simulated and experimental studies have shown that, even in simplified scenarios, misestimation of the dielectric properties can impair both the image quality and tumour detection. Many methods have been proposed to address the issue of the estimation of dielectric properties, but few have been tested with patient images. In this work, a leading approach for dielectric properties estimation based on the computation of many candidate images for microwave breast imaging is analysed with patient images for the first time. Using five clinical case studies of both healthy breasts and breasts with abnormalities, the advantages and disadvantages of computational patient-specific microwave breast image reconstruction are highlighted.

Discrete Dipole Approximation-Based Microwave Tomography for Fast Breast Cancer Imaging

This paper describes a fast microwave tomography reconstruction algorithm based on the two-dimensional discrete dipole approximation. Synthetic data from a finite-element based solver and experimental data from a microwave imaging system are used to reconstruct images and to validate the algorithm. The microwave measurement system consists of 16 monopole antennas immersed in a tank filled with lossy coupling liquid and a vector network analyzer. The low-profile antennas and lossy nature of system make the discrete dipole approximation an ideal forward solver in the image reconstructions. The results show that the algorithm can readily reconstruct a 2D plane of a cylindrical phantom. The proposed forward solver combined with the nodal adjoint method for computing the Jacobian matrix enables the algorithm to reconstruct an image within 6 seconds. This implementation provides a significant time savings and reduced memory requirements and is a dramatic improvement over previous implementations.

Precise detection of early breast tumor using a novel EEMD-based feature extraction approach by UWB microwave

The accurate detection of early breast cancer is of great significance to each patient. In recent years, breast cancer non-invasive detection technology based on Ultra-Wideband (UWB) microwave has been proposed and developed extensively, which is complementary to the existing methods. In this paper, a novel approach is proposed for tumor existence detection based on feature extraction algorithm. Firstly, the breast features are obtained by Ensemble Empirical Mode Decomposition (EEMD) and valid correlation Intrinsic Mode Function (IMF) selection. Secondly, raw feature datasets are constructed and then simplified by Principal Component Analysis (PCA) or Recursive Feature Elimination (RFE). Finally, the detection is realized by Support Vector Machines (SVM). The influence of different kernel functions and feature selection methods on detection results is compared. In this study, 11,232 sets of backscatter signals from simulation results of four different categories' breast models are utilized. And feature dataset is constructed by 24 specific features from each signal's four valid components. The results demonstrate that the proposed method can extract representative features and detect the early breast cancer effectively with the accuracy of 84.8%.

Evaluating Performance of Microwave Image Reconstruction Algorithms: Extracting Tissue Types with Segmentation Using Machine Learning

Evaluating the quality of reconstructed images requires consistent approaches to extracting information and applying metrics. Partitioning medical images into tissue types permits the quantitative assessment of regions that contain a specific tissue. The assessment facilitates the evaluation of an imaging algorithm in terms of its ability to reconstruct the properties of various tissue types and identify anomalies. Microwave tomography is an imaging modality that is model-based and reconstructs an approximation of the actual internal spatial distribution of the dielectric properties of a breast over a reconstruction model consisting of discrete elements. The breast tissue types are characterized by their dielectric properties, so the complex permittivity profile that is reconstructed may be used to distinguish different tissue types. This manuscript presents a robust and flexible medical image segmentation technique to partition microwave breast images into tissue types in order to facilitate the evaluation of image quality. The approach combines an unsupervised machine learning method with statistical techniques. The key advantage for using the algorithm over other approaches, such as a threshold-based segmentation method, is that it supports this quantitative analysis without prior assumptions such as knowledge of the expected dielectric property values that characterize each tissue type. Moreover, it can be used for scenarios where there is a scarcity of data available for supervised learning. Microwave images are formed by solving an inverse scattering problem that is severely ill-posed, which has a significant impact on image quality. A number of strategies have been developed to alleviate the ill-posedness of the inverse scattering problem. The degree of success of each strategy varies, leading to reconstructions that have a wide range of image quality. A requirement for the segmentation technique is the ability to partition tissue types over a range of image qualities, which is demonstrated in the first part of the paper. The segmentation of images into regions of interest corresponding to various tissue types leads to the decomposition of the breast interior into disjoint tissue masks. An array of region and distance-based metrics are applied to compare masks extracted from reconstructed images and ground truth models. The quantitative results reveal the accuracy with which the geometric and dielectric properties are reconstructed. The incorporation of the segmentation that results in a framework that effectively furnishes the quantitative assessment of regions that contain a specific tissue is also demonstrated. The algorithm is applied to reconstructed microwave images derived from breasts with various densities and tissue distributions to demonstrate the flexibility of the algorithm and that it is not data-specific. The potential for using the algorithm to assist in diagnosis is exhibited with a tumor tracking example. This example also establishes the usefulness of the approach in evaluating the performance of the reconstruction algorithm in terms of its sensitivity and specificity to malignant tissue and its ability to accurately reconstruct malignant tissue.

Numerical study of microwave induced thermoacoustic imaging for initial detection of cancer of breast on anatomically realistic breast phantom

BACKGROUND AND OBJECTIVE

Microwave-induced thermoacoustic imaging (MITAI) represents an innovative imaging approach for detection of breast cancer at initial phases by integrating the benefits provided by procedures of microwave and ultrasound imaging. The present investigation examines an innovative three-dimensional numerical modeling of MITAI as a problem with multi-physics nature.

METHODS

Simulations are performed by the use of COMSOL software. An anatomically realistic breast phantom representing various parts of a real breast, such as three different types of tissue, fibro-connective/glandular, transitional; and fatty, is taken into consideration along with a tumor. This breast phantom with a tumor is irradiated by a 2.45 GHz pulsed rectangular waveguide. The temperature increase and its consequent pressure caused by electromagnetic absorption are analyzed.

RESULTS

More temperature increase occurs in the tumor area than in the other parts of the breast, the fact which results in further increase in the pressure in the tumor area than other parts. This makes the tumor distinguishable. The ability of the MITAI process regarding the tumor size, shape (both geometrical shape and spatial orientation), location, the irradiation power level, and the pulse width is also investigated. It is demonstrated that tumor size does not have a significant impact on the efficiency of detection. In fact, very small tumors in the early stages of cancer development (with a radius of 0.25 cm) are also detectable by employing the MITAI technique. The geometrical shape of the tumor does not considerably affect the detecting performance just by itself. The spatial orientation of the tumor actually has a great impact on it. The location of the tumor is an essential factor involved in detection efficiency of MITAI. Tumors located in the fatty tissues would be much easier to be detected than those in the glandular tissues. Moreover, results denote that with augmentation of the irradiation power level or increasing the pulse width, stronger acoustic waves would be produced to make tumor detection easier.

CONCLUSION

These modeling and techniques may be applied aiming for determination of the amount of the generated pressure differences and acoustic pressure magnitude, and can be utilized as an effective prognosticator in practical tests.

Microwave Breast Imaging Using Rotational Bistatic Impulse Radar for the Detection of Breast Cancer: Protocol for a Prospective Diagnostic Study

Background

Mammography is the standard examination for breast cancer screening; however, it is associated with pain and exposure to ionizing radiation. Microwave breast imaging is a less invasive method for breast cancer surveillance. A bistatic impulse radar–based breast cancer detector has recently been developed.

Objective

This study aims to present a protocol for evaluating the diagnostic accuracy of the novel microwave breast imaging device.

Methods

This is a prospective diagnostic study. A total of 120 participants were recruited before treatment administration and divided into 2 cohorts: 100 patients diagnosed with breast cancer and 20 participants with benign breast tumors. The detector will be directly placed on each breast, while the participant is in supine position, without a coupling medium. Confocal images will be created based on the analyzed data, and the presence of breast tumors will be assessed. The primary endpoint will be the diagnostic accuracy, sensitivity, and specificity of the detector for breast cancer and benign tumors. The secondary endpoint will be the safety and detectability of each molecular subtype of breast cancer. For an exploratory endpoint, the influence of breast density and tumor size on tumor detection will be investigated.

Results

Recruitment began in November 2018 and was completed by March 2020. We anticipate the preliminary results to be available by summer 2021.

Conclusions

This study will provide insights on the diagnostic accuracy of microwave breast imaging using a rotational bistatic impulse radar. The collected data will improve the diagnostic algorithm of microwave imaging and lead to enhanced device performance.

Trial Registration

Japan Registry of Clinical Trials jRCTs062180005; https://jrct.niph.go.jp/en-latest-detail/jRCTs062180005

International Registered Report Identifier (IRRID)

DERR1-10.2196/17524

3D printed PLA/copper bowtie antenna for biomedical imaging applications

This study aims to increase the performance of the microwave antenna by using 3D printed conductive substrates, which is mainly used in biomedical imaging applications. Conventional antennas such as Horn and Vivaldi have coarse dimensions to integrate into the microwave imaging systems. Therefore, 3D printed Bowtie antenna structures were developed, which yield low cost and smaller sizes. PLA, PLA/copper, and PLA/carbon substrates were produced with a 3D printer. These materials were tested in terms of their dielectric constants between 1 and 10 GHz. The conductive part of the antenna was copper, with a thickness of 0.8 mm, which was embedded in the substrate parts. The reflection coefficients of the antennas were tested within 0-3 GHz frequency range via miniVNA network analyzer. The results show that the 3D printed PLA/copper and PLA/carbon antenna are highly suitable for the usage in biomedical imaging systems.

Enhancement of Penetration of Millimeter Waves by Field Focusing Applied to Breast Cancer Detection

OBJECTIVE

The potentialities of improving the penetration of millimeter waves for breast cancer imaging are here explored.

METHODS

A field focusing technique based on a convex optimization method is proposed, capable of increasing the field level inside a breast-emulating stratification.

RESULTS

The theoretical results are numerically validated via the design and simulation of two circularly polarized antennas. The experimental validation of the designed antennas, using tissue-mimicking phantoms, is provided, being in good agreement with the theoretical predictions.

CONCLUSION

The possibility of focusing, within a lossy medium, the electromagnetic power at millimeter-wave frequencies is demonstrated.

SIGNIFICANCE

Field focusing can be a key for using millimeter waves for breast cancer detection.

Advances in Microwave Near-Field Imaging: Prototypes, Systems, and Applications

Microwave imaging employs detection techniques to evaluate hidden or embedded objects in a structure or media using electro-magnetic (EM) waves in the microwave range, 300 MHz-300 GHz. Microwave imaging is often associated with radar detection such as target location and tracking, weather-pattern recognition, and underground surveillance, which are far-field applications. In recent years, due to microwaves' ability to penetrate optically opaque media, short-range applications, including medical imaging, nondestructive testing (NDT) and quality evaluation, through-the-wall imaging, and security screening, have been developed. Microwave near-field imaging most often occurs when detecting the profile of an object within the short range (when the distance from the sensor to the object is less than one wavelength to several wave-lengths) and depends on the electrical size of the antenna(s) and target.

Review of Microwaves Techniques for Breast Cancer Detection

Conventional breast cancer detection techniques including X-ray mammography, magnetic resonance imaging, and ultrasound scanning suffer from shortcomings such as excessive cost, harmful radiation, and inconveniences to the patients. These challenges motivated researchers to investigate alternative methods including the use of microwaves. This article focuses on reviewing the background of microwave techniques for breast tumour detection. In particular, this study reviews the recent advancements in active microwave imaging, namely microwave tomography and radar-based techniques. The main objective of this paper is to provide researchers and physicians with an overview of the principles, techniques, and fundamental challenges associated with microwave imaging for breast cancer detection. Furthermore, this study aims to shed light on the fact that until today, there are very few commercially available and cost-effective microwave-based systems for breast cancer imaging or detection. This conclusion is not intended to imply the inefficacy of microwaves for breast cancer detection, but rather to encourage a healthy debate on why a commercially available system has yet to be made available despite almost 30 years of intensive research.

Breast Cancer Detection-A Synopsis of Conventional Modalities and the Potential Role of Microwave Imaging

Global statistics have demonstrated that breast cancer is the most frequently diagnosed invasive cancer and the leading cause of cancer death among female patients. Survival following a diagnosis of breast cancer is grossly determined by the stage of the disease at the time of initial diagnosis, highlighting the importance of early detection. Improving early diagnosis will require a multi-faceted approach to optimizing the use of currently available imaging modalities and investigating new methods of detection. The application of microwave technologies in medical diagnostics is an emerging field of research, with breast cancer detection seeing the most significant progress in the last twenty years. In this review, the application of current conventional imaging modalities is discussed, and recurrent shortcomings highlighted. Microwave imaging is rapid and inexpensive. If the preliminary results of its diagnostic capacity are substantiated, microwave technology may offer a non-ionizing, non-invasive, and painless adjunct or stand-alone modality that could possibly be implemented in routine diagnostic breast care.

Classification of breast tumor models with a prototype microwave imaging system

PURPOSE

The assessment of the size and shape of breast tumors is of utter importance to the correct diagnosis and staging of breast cancer. In this paper, we classify breast tumor models of varying sizes and shapes using signals collected with a monostatic ultra-wideband radar microwave imaging prototype system with machine learning algorithms specifically tailored to the collected data.

METHODS

A database comprising 13 benign and 13 malignant tumor models with sizes between 13 and 40 mm was created using dielectrically representative tissue mimicking materials. These tumor models were placed inside two breast phantoms: a homogeneous breast phantom and a breast phantom with clusters of fibroglandular mimicking tissue, accounting for breast heterogeneity. The breast phantoms with tumors were imaged with a monostatic microwave imaging prototype system, over a 1-6 GHz frequency range. The classification of benign and malignant tumors embedded in the two breast phantoms was completed, and tumor classification was evaluated with Principal Component Analysis as a feature extraction method, and tuned Naïve Bayes (NB), decision trees (DT), and k-nearest neighbours (kNN) as classifiers. We further study which antenna positions are better placed to classify tumors, discuss the feature extraction method and optimize classification algorithms, by tuning their hyperparameters, to improve sensitivity, specificity and the receiver operating characteristic curve, while ensuring maximum generalization and avoiding overfitting and data contamination. We also added a realistic synthetic skin response to the collected signals and examined its global effect on classification of benign vs malignant tumors.

RESULTS

In terms of global classification performance, kNN outperformed DT and NB machine learning classifiers, achieving a classification accuracy of 96.2% when classifying between benign and malignant tumor phantoms in a homogeneous breast phantom (both when the skin artifact is and is not considered).

CONCLUSIONS

We experimentally classified tumor models as benign or malignant with a microwave imaging system, and we showed a methodology that can potentially assess the shape of breast tumors, which will give further insight into the correct diagnosis and staging of breast cancer.

Experimental Validation of Microwave Tomographywith the DBIM-TwIST Algorithm for Brain StrokeDetection and Classification

We present an initial experimental validation of a microwave tomography (MWT) prototypefor brain stroke detection and classification using the distorted Born iterative method, two-stepiterative shrinkage thresholding (DBIM-TwIST) algorithm. The validation study consists of firstpreparing and characterizing gel phantoms which mimic the structure and the dielectric propertiesof a simplified brain model with a haemorrhagic or ischemic stroke target. Then, we measure theS-parameters of the phantoms in our experimental prototype and process the scattered signals from 0.5to 2.5 GHz using the DBIM-TwIST algorithm to estimate the dielectric properties of the reconstructiondomain. Our results demonstrate that we are able to detect the stroke target in scenarios where theinitial guess of the inverse problem is only an approximation of the true experimental phantom.Moreover, the prototype can differentiate between haemorrhagic and ischemic strokes based on theestimation of their dielectric properties.

3-D experimental UWB microwave imaging in dispersive media

Three-dimensional (3D) microwave imaging in very dispersive media using a phase shift and sum (PSAS) algorithm is presented. The phase shift and amplitude attenuation within the dispersive media are compensated individually for each frequency component and then integrated to calculate the pixel values in the region of interest (ROI). Therefore, the multi-speed and multipath issue when an ultra-wide band (UWB) signal propagates in the dispersive media is overcome. The current approach is validated by lab-collected data using our self-developed 3-D UWB microwave measurement system. Image results are compared with prior arts at the end of this paper.

Machine Learning Approaches for Automated Lesion Detection in Microwave Breast Imaging Clinical Data

Breast lesion detection employing state of the art microwave systems provide a safe, non-ionizing technique that can differentiate healthy and non-healthy tissues by exploiting their dielectric properties. In this paper, a microwave apparatus for breast lesion detection is used to accumulate clinical data from subjects undergoing breast examinations at the Department of Diagnostic Imaging, Perugia Hospital, Perugia, Italy. This paper presents the first ever clinical demonstration and comparison of a microwave ultra-wideband (UWB) device augmented by machine learning with subjects who are simultaneously undergoing conventional breast examinations. Non-ionizing microwave signals are transmitted through the breast tissue and the scattering parameters (S-parameter) are received via a dedicated moving transmitting and receiving antenna set-up. The output of a parallel radiologist study for the same subjects, performed using conventional techniques, is taken to pre-process microwave data and create suitable data for the machine intelligence system. These data are used to train and investigate several suitable supervised machine learning algorithms nearest neighbour (NN), multi-layer perceptron (MLP) neural network, and support vector machine (SVM) to create an intelligent classification system towards supporting clinicians to recognise breasts with lesions. The results are rigorously analysed, validated through statistical measurements, and found the quadratic kernel of SVM can classify the breast data with 98% accuracy.

A Discrete Dipole Approximation Solver Based on the COCG-FFT Algorithm and Its Application to Microwave Breast Imaging

We introduce the discrete dipole approximation (DDA) for efficiently calculating the two-dimensional electric field distribution for our microwave tomographic breast imaging system. For iterative inverse problems such as microwave tomography, the forward field computation is the time limiting step. In this paper, the two-dimensional algorithm is derived and formulated such that the iterative conjugate orthogonal conjugate gradient (COCG) method can be used for efficiently solving the forward problem. We have also optimized the matrix-vector multiplication step by formulating the problem such that the nondiagonal portion of the matrix used to compute the dipole moments is block-Toeplitz. The computation costs for multiplying the block matrices times a vector can be dramatically accelerated by expanding each Toeplitz matrix to a circulant matrix for which the convolution theorem is applied for fast computation utilizing the fast Fourier transform (FFT). The results demonstrate that this formulation is accurate and efficient. In this work, the computation times for the direct solvers, the iterative solver (COCG), and the iterative solver using the fast Fourier transform (COCG-FFT) are compared with the best performance achieved using the iterative solver (COCG-FFT) in C++. Utilizing this formulation provides a computationally efficient building block for developing a low cost and fast breast imaging system to serve under-resourced populations.

Application of Two-Dimensional Discrete Dipole Approximation in Simulating Electric Field of a Microwave Breast Imaging System

The two-dimensional electric field distribution of the microwave imaging system is numerically simulated for a simplified breast tumour model. The proposed two-dimensional discrete dipole approximation (DDA) has the potential to improve computational speed compared to other numerical methods while retaining comparable accuracy. We have modeled the field distributions in COMSOL Multiphysics as baseline results to benchmark the DDA simulations. We have also investigated the adequate sampling size and the effect of inclusion size and property contrast on solution accuracy. In this way, we can utilize the 2D DDA as an alternative, fast and reliable forward solver for microwave tomography. From a mathematical perspective, the derivation of the 2D DDA and its application to microwave imaging is new and not previously implemented. The simulation results and the measurements show that the 2D DDA is a well-grounded forward solver for the specified microwave breast imaging system.

3-D Microwave Tomography Using the Soft Prior Regularization Technique: Evaluation in Anatomically Realistic MRI-Derived Numerical Breast Phantoms

OBJECTIVE

Fusion of magnetic resonance imaging (MRI) breast images with microwave tomography is accomplished through a soft prior technique, which incorporates spatial information (from MRI), i.e., accurate boundary location of different regions of interest, into the regularization process of the microwave image reconstruction algorithm.

METHODS

Numerical experiments were completed on a set of three-dimensional (3-D) breast geometries derived from MR breast data with different parenchymal densities, as well as a simulated tumor to evaluate the performance over a range of breast shapes, sizes, and property distributions.

RESULTS

When the soft prior regularization technique was applied, both permittivity and conductivity relative root mean square error values decreased by more than 87% across all breast densities, except in two cases where the error decrease was only 55% and 78%. In addition, the incorporation of structural priors increased contrast between tumor and fibroglandular tissue by 59% in permittivity and 192% in conductivity.

CONCLUSION

This study confirmed that the soft prior algorithm is robust in 3-D and can function successfully across a range of complex geometries and tissue property distributions.

SIGNIFICANCE

This study demonstrates that our microwave tomography is capable of recovering accurate tissue property distributions when spatial information from MRI is incorporated through soft prior regularization.

Sensitivity and Specificity Estimation Using Patient-Specific Microwave Imaging in Diverse Experimental Breast Phantoms

Many new clinical investigations of microwave breast imaging have been published in recent years. Trials with over one hundred participants have indicated the potential of microwave imaging to detect breast cancer, with particularly encouraging sensitivity results reported from women with dense breasts. The next phase of clinical trials will involve larger and more diverse populations, including women with no breast abnormalities or benign breast diseases. These trials will need to address clinical efficacy in terms of sensitivity and specificity. A number of challenges exist when using microwave imaging with broad populations: 1) addressing the substantial variance in breast composition observed in the population and 2) achieving high specificity given differences between individuals. This paper analyses these challenges using a diverse phantom set which models the variance in breast composition and tumor shape and size seen in the population. The data show that the sensitivity of microwave breast imaging in breasts of differing density can suffer if patient-specific beamforming is not used. Moreover, the results suggest that achieving high specificity in dense breasts may be difficult, but that patient-specific beamforming does not adversely affect the expected specificity. In summary, this paper finds that patient-specific beamforming has a tangible impact on expected sensitivity in experimental cases and that achieving high specificity in dense breasts may be challenging.

Detectability of Breast Tumors in Excised Breast Tissues of Total Mastectomy by IR-UWB-Radar-Based Breast Cancer Detector

The objective of this paper is to investigate the detectability of breast tumors having various histological types in excised breast tissues of total mastectomy. The tumor images measured by a portable impulse-radio-ultra-wideband (IR-UWB)-radar-based breast cancer detector are compared with both pathological images and images of dedicated breast positron emission tomography. It is found that the detector can detect invasive-ductal-carcinomas and extensive intraductal component in the dense breast. The density of the breast has a correlation to the effective permittivity derived from the reconstructed confocal images. The results show that the IR-UWB-radar-based breast cancer detector has a potential as a portable modality for early-stage breast cancer screening.

Resonator Based Switching Technique between Ultra Wide Band (UWB) and Single/Dual Continuously Tunable-Notch Behaviors in UWB Radar for Wireless Vital Signs Monitoring

This paper presents a novel resonator that can switch and create three important behaviors within the same antenna using miniaturized capacitors. The resonator was integrated into conventional Ultra-Wide Band (UWB) antenna to achieve UWB and Single/Dual continuously tunable-notch behaviors. The Single/Dual notched was continuously tuned to our desired frequency band by changing the value of the capacitors. The antenna designed and fabricated to validate these behaviors had a compact size of 24 × 30.5 mm², including the ground plane. The radiation patterns were very clean due to the placement of the proposed resonator in the special ground plane. Moreover, the presented novel resonator and switching technique was compared with the recently proposed resonators and their switching techniques. The prototype for the antenna was also developed in order to validate its performance in wireless vital signs monitoring. The presented miniaturized resonator based antenna was utilized for tumor sensing and simulations were provided in this regard. Moreover, the deployment of the proposed resonator based UWB antenna sensor in Pipeline Integrity Monitoring system was also investigated and discussed.

Effects of the Plastic of the Realistic GeePS-L2S-Breast Phantom

A breast phantom developed at the Supelec Institute was interrogated to study its suitability for microwave tomography measurements. A microwave measurement system based on 16 monopole antennas and a vector network analyzer was used to study how the S-parameters are influenced by insertion of the phantom. The phantom is a 3D-printed structure consisting of plastic shells that can be filled with tissue mimicking liquids. The phantom was filled with different liquids and tested with the measurement system to determine whether the plastic has any effects on the recovered images or not. Measurements of the phantom when it is filled with the same liquid as the surrounding coupling medium are of particular interest. In this case, the phantom plastic has a substantial effects on the measurements which ultimately detracts from the desired images.

Impact of Information Loss on Reconstruction Quality in Microwave Tomography for Medical Imaging

This paper studies how limited information in data acquired by a wideband microwave tomography (MWT) system can affect the quality of reconstructed images. Limitations can arise from experimental errors, mismatch between the system and its model in the imaging algorithm, or losses in the immersion and coupling medium which are required to moderate this mismatch. We also present a strategy for improving reconstruction performance by discarding data that is dominated by experimental errors. The approach relies on recording transmitted signals in a wide frequency range, and then correlating the data in different frequencies. We apply this method to our wideband MWT prototype, which has been developed in our previous work. Using this system, we present results from simulated and experimental data which demonstrate the practical value of the frequency selection approach. We also propose a K-neighbour method to identify low quality data in a robust manner. The resulting enhancement in imaging quality suggests that this approach can be useful for various medical imaging scenarios, provided that data from multiple frequencies can be acquired and used in the reconstruction process.

A Multithreshold Iterative DBIM-Based Algorithm for the Imaging of Heterogeneous Breast Tissues

OBJECTIVE

This paper proposes a novel microwave imaging (MWI) multifrequency technique, which combines compressive sensing (CS) with the well-known distorted Born iterative method. CS strategies are emerging as a promising tool in MWI applications, which can improve reconstruction quality and/or reduce the number of data samples.

METHODS

The proposed approach is based on iterative shrinkage thresholding algorithm (ISTA), which has been modified to include an automatic and adaptive selection of multithreshold values.

RESULTS

This adaptive multithreshold ISTA implementation is applied in reconstruction of two-dimensional (2-D) numerical heterogeneous breast phantoms, where it outperforms the standard thresholding implementation. We show that our approach is also successful in 3-D simulations of a realistic imaging experiment, despite the mismatch between the data and our algorithm's forward model.

CONCLUSION

These results suggest that the proposed algorithm is a promising tool for medical MWI applications.

SIGNIFICANCE

Important novelties of this approach are the use of multiple thresholds to recover the different unknowns in the Debye model as well as the adaptive selection of these thresholds. Moreover, we have shown that employing modified hard constraints inside the linear step of the inversion procedure can enhance reconstruction quality.

Image Registration for Microwave Tomography of the Breast Using Priors From Nonsimultaneous Previous Magnetic Resonance Images

Microwave imaging is a low-cost imaging method that has shown promise for breast imaging and, in particular, neoadjuvant chemotherapy monitoring. The early studies of microwave imaging in the therapy monitoring setting are encouraging. For the neoadjuvant therapy application, it would be desirable to achieve the most accurate possible characterization of the tissue properties. One method to achieve increased resolution and specificity in microwave imaging reconstruction is the use of a soft prior regularization. The objective of this study is to develop a method to use magnetic resonance (MR) images, taken in a different imaging configuration, as this soft prior. To enable the use of the MR images as a soft prior, it is necessary to register the MR images to the microwave imaging space. Registration fiducials were placed around the breast that are visible in both the MRI and with an optical scanner integrated into the microwave system. Utilizing these common registration locations, numerical algorithms have been developed to warp the original breast MR images into a geometry closely resembling that in which the breast is pendant in the microwave system.

Microwave Sensors for Breast Cancer Detection

Breast cancer is the leading cause of death among females, early diagnostic methods with suitable treatments improve the 5-year survival rates significantly. Microwave breast imaging has been reported as the most potential to become the alternative or additional tool to the current gold standard X-ray mammography for detecting breast cancer. The microwave breast image quality is affected by the microwave sensor, sensor array, the number of sensors in the array and the size of the sensor. In fact, microwave sensor array and sensor play an important role in the microwave breast imaging system. Numerous microwave biosensors have been developed for biomedical applications, with particular focus on breast tumor detection. Compared to the conventional medical imaging and biosensor techniques, these microwave sensors not only enable better cancer detection and improve the image resolution, but also provide attractive features such as label-free detection. This paper aims to provide an overview of recent important achievements in microwave sensors for biomedical imaging applications, with particular focus on breast cancer detection. The electric properties of biological tissues at microwave spectrum, microwave imaging approaches, microwave biosensors, current challenges and future works are also discussed in the manuscript.

Preliminary Results of a New Auxiliary Mechatronic Near-Field Radar System to 3D Mammography for Early Detection of Breast Cancer

Accurate and early detection of breast cancer is of high importance, as it is directly associated with the patients’ overall well-being during treatment and their chances of survival. Uncertainties in current breast imaging methods can potentially cause two main problems: (1) missing newly formed or small tumors; and (2) false alarms, which could be a source of stress for patients. A recent study at the Massachusetts General Hospital (MGH) indicates that using Digital Breast Tomosynthesis (DBT) can reduce the number of false alarms, when compared to conventional mammography. Despite the image quality enhancement DBT provides, the accurate detection of cancerous masses is still limited by low radiological contrast (about 1%) between the fibro-glandular tissue and affected tissue at X-ray frequencies. In a lower frequency region, at microwave frequencies, the contrast is comparatively higher (about 10%) between the aforementioned tissues; yet, microwave imaging suffers from low spatial resolution. This work reviews conventional X-ray breast imaging and describes the preliminary results of a novel near-field radar imaging mechatronic system (NRIMS) that can be fused with the DBT, in a co-registered fashion, to combine the advantages of both modalities. The NRIMS consists of two antipodal Vivaldi antennas, an XY positioner, and an ethanol container, all of which are particularly designed based on the DBT physical specifications. In this paper, the independent performance of the NRIMS is assessed by (1) imaging a bearing ball immersed in sunflower oil and (2) computing the heat Specific Absorption Rate (SAR) due to the electromagnetic power transmitted into the breast. The preliminary results demonstrate that the system is capable of generating images of the ball. Furthermore, the SAR results show that the system complies with the standards set for human trials. As a result, a configuration based on this design might be suitable for use in realistic clinical applications.

Review of breast screening: Toward clinical realization of microwave imaging

Microwave imaging (MI) technology has come a long way to introduce a noninvasive, inexpensive, fast, convenient, and safe screening tool for clinical breast monitoring. However, there is a niche between the existing understanding of MI by engineers versus clinicians. Our manuscript targets that niche and highlights the state of the art in MI technology compared to the existing breast cancer detection modalities (mammography, ultrasound, molecular imaging, and magnetic resonance). The significance of our review article is in consolidation of up-to-date breast clinician views with the practical needs and engineering challenges of a novel breast screening modality. We summarize breast tissue abnormalities and highlight the benefits as well as potential drawbacks of the MI as a cancer detection methodology. Our goal is to present an article that MI researchers as well as practitioners in the field can use to assess the viability of the MI technology as a competing or complementary modality to the existing means of breast cancer screening.

Microwave breast cancer detection using time-frequency representations

Microwave-based breast cancer detection has been proposed as a complementary approach to compensate for some drawbacks of existing breast cancer detection techniques. Among the existing microwave breast cancer detection methods, machine learning-type algorithms have recently become more popular. These focus on detecting the existence of breast tumours rather than performing imaging to identify the exact tumour position. A key component of the machine learning approaches is feature extraction. One of the most widely used feature extraction method is principle component analysis (PCA). However, it can be sensitive to signal misalignment. This paper proposes feature extraction methods based on time-frequency representations of microwave data, including the wavelet transform and the empirical mode decomposition. Time-invariant statistics can be generated to provide features more robust to data misalignment. We validate results using clinical data sets combined with numerically simulated tumour responses. Experimental results show that features extracted from decomposition results of the wavelet transform and EMD improve the detection performance when combined with an ensemble selection-based classifier.

Surface Estimation for Microwave Imaging

Biomedical imaging and sensing applications in many scenarios demand accurate surface estimation from a sparse set of noisy measurements. These measurements may arise from a variety of sensing modalities, including laser or electromagnetic samples of an object’s surface. We describe a state-of-the-art microwave imaging prototype that has sensors to acquire both microwave and laser measurements. The approach developed to translate sparse samples of the breast surface into an accurate estimate of the region of interest is detailed. To evaluate the efficacy of the method, laser and electromagnetic samples are acquired by sensors from three realistic breast models with varying sizes and shapes. A set of metrics is developed to assist with the investigation and demonstrate that the algorithm is able to accurately estimate the shape of a realistic breast phantom when only a sparse set of data are available. Moreover, the algorithm is robust to the presence of measurement noise, and is effective when applied to measurement scans of patients acquired with the prototype.

Two-step inversion with a logarithmic transformation for microwave breast imaging

PURPOSE

The authors have developed a new two-step microwave tomographic image reconstruction process specifically designed to incorporate logarithmic transformed microwave imaging algorithms as a means of significantly improving spatial resolution and target property recovery. Log transform eliminates the need for a priori information, but spatial filtering often integrated as part of the regularization required to stabilize image recovery, generally smooths image features and reduces object definition. The new implementation begins with this smoothed image as the first step, but then utilizes it as the starting estimate for a second step which continues the iterative process with a standard weighted Euclidean distance regularization. The penalty term of the latter restricts the new image to a multi-dimensional location close to the original but allows the algorithm to optimize the image without excessive smoothing.

METHODS

The overall approach is based on a Gauss-Newton iterative scheme which incorporates a log transformation as a way of making the reconstruction more linear. It has been shown to be robust and not require a priori information as a condition for convergence, but does produce somewhat smoothed images as a result of associated regularization. The new two-step process utilizes the previous technique to generate a smoothed initial estimate and then uses the same reconstruction process with a weighted Euclidean distance penalty term. A simple and repeatable method has been implemented to determine the weighting factor without significant computational burden. The reconstructions are assessed according to conventional parameter estimation metrics.

RESULTS

We apply the approach to phantom experiments using large, high contrast canonical shapes followed by a set of images recovered from an actual patient exam. The image improvements are substantial in regards to improved property recovery and feature delineation without inducing unwanted artifacts. Analysis of the residual vector after the reconstruction process further emphasizes that the minimization criterion is efficient with minimal biases.

CONCLUSIONS

The outcome is a novel synergism of an established stable reconstruction algorithm with a conventional regularization technique. It maintains the ability to recover high quality microwave tomographic images without the bias of a priori information while substantially improving image quality. The results are confirmed on both phantom experiments and patient exams.

Electrical Characterization of Glycerin: Water Mixtures: Implications for Use as a Coupling Medium in Microwave Tomography

We examine the broadband behavior of complex electrical properties of glycerin and water mixtures over the frequency range of 0.1 - 25.0 GHz, especially as they relate to using these liquids as coupling media for microwave tomographic imaging. Their combination is unique in that they are mutually miscible over the full range of concentrations which allows them to be tailored to dielectric property matching for biological tissues. While the resultant mixture properties are partially driven by differences in the inherent low frequency permittivity of each constituent, relaxation frequency shifts play a disproportionately larger role in increasing the permittivity dispersion while also dramatically increasing the effective conductivity over the frequency range of 1 to 3 GHz. For the full range of mixture ratios, the relaxation frequency shifts from 17.5 GHz for 0% glycerin to less than 0.1 GHz for 100% glycerin. Of particular interest is the fact that the conductivity stays above 1.0 S/m over the 1-3 GHz range for glycerin mixture ratios (70-90% glycerin) we use for microwave breast tomography. The high level of attenuation is critical for suppressing unwanted multipath signals. This paper presents a full characterization of these liquids along with a discussion of their benefits and limitations in the context of microwave tomography.