Threshold damage mechanisms in brittle solids and their impact on advanced technologies

On elastoplastic behavior of porous enamel-An indentation and numerical study

The micro/nano pores in natural mineralized tissues can, to a certain extent, affect their responses to mechanical loading but are generally ignored in existing indentation analysis. In this study, we first examined the void volume fraction of sound and caries lesion enamels through micro-computed tomography (micro-CT). A Berkovich indentation study was then carried out to characterize the effect of porous microstructure on the mechanical behavior of the human enamels. The indentation tests were also modeled using the nonlinear finite element analysis technique to simulate indentation load-displacement curves, which showed reasonable agreement with the experimental measurements. From the simulation results, the extent of densification in the plastic zone was identified and the corresponding stress and contact pressure evolutions were quantified. Further, a conventional elastic-perfectly plastic material model without considering micropores was also developed to investigate the compaction effect of the porous structure. The simulation results reveal that conventional elastic perfect-plastic constitutive models become less reliable to model the mechanical behavior of carious lesion enamel with increasing loss of mineral content as it underestimates the yield stress and plastic energy dissipation. This study divulges the importance of compaction of porous enamel structure beneath the indented area. Note that understanding the effect of porous microstructures on plastic behavior is vital as the involved inelastic deformation mechanism associated with irreversible processes, such as wear and localized microcracking, has a significant bearing on wear and fatigue behavior of enamel. STATEMENT OF SIGNIFICANCE: Based on micro-CT and nano-indentation characterization, a numerical model was developed aiming to precisely describe the deformation behavior of naturally porous enamel. Inelastic properties and energy dissipation characteristics of porous enamel were investigated in detail. This work demonstrated that the existence of micro-pores in White Spot Lesions (WSLs) contributes to mechanical stability, which can mitigate the reduction in Young's modulus and fracture toughness resulting from loss of mineral components. The knowledge gained from this study can be used to explain the mechanisms related to irreversible processes, such as contact induced cracking and wear, and strengthen understanding of the mechanical behavior of porous mineralized tissues.

Current speed sintering and high-speed sintering protocols compromise the translucency but not strength of yttria-stabilized zirconia

OBJECTIVES

To investigate the impacts of speed and high-speed sintering on the densification, microstructure, phase composition, translucency, and flexural strength of yttria-stabilized zirconia (YSZ).

METHODS

A total of 162 disc-shaped specimens (n = 18) were cold-isostatically pressed from 3YSZ (Zpex), 4YSZ (Zpex 4), and 5YSZ (Zpex Smile) powders (Tosoh Corporation) and sintered according to the following protocols: conventional (control, ∼12 h), speed (∼28 min for 3YSZ; ∼60 min for 4YSZ and 5YSZ), and high-speed (∼18 min) sintering. Dimensions of zirconia specimens after sintering and polishing (1-μm diamond grit finish) were Ø13.75 × 1 mm. Density, microstructure, phase content, translucency parameter, and biaxial flexural strength were evaluated using Archimedes', SEM, XRD, spectrophotometric, and piston-on-3-ball methods, respectively. Data were analyzed with either one-way ANOVA and Tukey's test or Kruskal-Wallis with Dunn's test (α = 0.05).

RESULTS

For all YSZ compositions, conventional sintering yielded the highest density followed by speed then high-speed sintering. All sintering protocols resulted in similar strength values; however, speed and high-speed sintering protocols afforded significantly lower translucency relative to conventional sintering. XRD analysis revealed similar spectra for YSZs sintered by various protocols. The speed sintered specimens had the smallest grain size whereas the high-speed sintered 5YSZ possessed the largest grain size among all groups. SEM examination of all YSZ compositions revealed that the average pore size was an order of magnitude smaller than the average grain size.

SIGNIFICANCE

Speed and high-speed sintering of YSZs yield similar strength but diminished density and translucency relative to their conventionally sintered counterparts.

Microplastic Index-How to Predict Microplastics Formation?

The presence of microplastics in environmental compartments is generally recognized as a (potential) health risk. Many papers have been published on the abundance of microplastics at various locations around the globe, but only limited knowledge is available on possible mitigation routes. One of the mitigation routes is based on the choice of plastic materials used for products that may unintentionally end up in the environment. As a first approach, this paper presents a method to calculate the tendency of polymers to form microplastics, based on their mechanical and physical properties. A MicroPlastic Index (MPI) that correlates the microplastic formation to polymer properties is defined for both impact and wear of polymers via a theoretical particle size and the energy required to form these particles. A first comparison between calculated and experimental particle size is included. The MPI for impact and wear follow the same trend. Finally, these MPIs are correlated to the respective abundance of the microplastics in the environment, corrected for global production of the corresponding polymers: the higher the MPI, the more microplastics are found in the environment. Thus, the MPI can be used as a basis for choice or redesign of polymers to reduce microplastic formation.

A Critical Review of Dental Lithia-Based Glass-Ceramics

The purpose of this article is to review current understanding of lithia-based glass-ceramics and to identify future research needs for this class of dental materials in relation to novel compositions and fabrication methods. With rapid advances in material development and digital technology, time efficiency of dental workflow and fit accuracy of ceramic restorations are ever improving. Lithia-based glass-ceramics are at the forefront of this advance-new variants with more efficient fabrication routes are continually being introduced into the marketplace. Base glass composition, crystallization heat treatment, nucleant and coloration additives, and property gradation are some pertinent variables. The trend in fabrication is to move from CAD/CAM grinding of partially crystallized glass-ceramics to fully crystallized materials, thereby circumventing the need for postmachining firing altogether. In these endeavors, a better understanding of mechanical properties and evolving shaping technologies, such as ductile grinding, is paramount. Additive manufacturing and 3-dimensional printing methodologies offer a promising alternative to current CAD/CAM subtractive manufacturing routes. Challenges to the implementation of new technologies in efficient development and production of high-quality dental glass-ceramic prostheses are addressed.