Accelerated wound closure of pressure ulcers in aged mice by chitosan scaffolds with and without bFGF

PLA tissue-engineered scaffolds loaded with sustained-release active substance chitosan nanoparticles: Modeling BSA-bFGF as the active substance

The utilization of basic fibroblast growth factor (bFGF) in the development of tissue-engineered scaffolds is both challenging and imperative. In our pursuit of creating a scaffold that aligns with the natural healing process, we initially fabricated chitosan-bFGF nanoparticles (CS-bFGF NPs) through electrostatic spraying. Subsequently, polylactic acid (PLA) fiber was prepared using electrospinning technique, and the CS-bFGF NPs were uniformly embedded within the pores of porous PLA fibers. Scanning electron micrographs illustrate the smooth surface of the nanoparticles, showing a porous structure intricately attached to PLA fibers. Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) analyses provided conclusive evidence that the CS-bFGF NPs were uniformly distributed throughout the porous PLA fibers, forming a robust physical bond through electrostatic adsorption. The resultant scaffolds exhibited commendable mechanical properties and hydrophilicity, facilitating a sustained-release for 72 h. Furthermore, the biocompatibility and degradation performance of the scaffolds were substantiated by monitoring conductivity and pH changes in pure water over different time intervals, complemented by scanning electron microscopy (SEM) observations. Cell experiments confirmed the cytocompatibility of the scaffolds. In animal studies, the group treated with 16 % NPs/Scaffold demonstrated the highest epidermal reconstruction rate. In summary, our developed materials present a promising candidate for serving as a tissue engineering scaffold, showcasing exceptional biocompatibility, sustained-release characteristics, and substantial potential for promoting epidermal regeneration.

Bioarchitectural Design of Bioactive Biopolymers: Structure-Function Paradigm for Diabetic Wound Healing

Chronic wounds such as diabetic ulcers are a major complication in diabetes caused by hyperglycemia, prolonged inflammation, high oxidative stress, and bacterial bioburden. Bioactive biopolymers have been found to have a biological response in wound tissue microenvironments and are used for developing advanced tissue engineering strategies to enhance wound healing. These biopolymers possess innate bioactivity and are biodegradable, with favourable mechanical properties. However, their bioactivity is highly dependent on their structural properties, which need to be carefully considered while developing wound healing strategies. Biopolymers such as alginate, chitosan, hyaluronic acid, and collagen have previously been used in wound healing solutions but the modulation of structural/physico-chemical properties for differential bioactivity have not been the prime focus. Factors such as molecular weight, degree of polymerization, amino acid sequences, and hierarchical structures can have a spectrum of immunomodulatory, anti-bacterial, and anti-oxidant properties that could determine the fate of the wound. The current narrative review addresses the structure-function relationship in bioactive biopolymers for promoting healing in chronic wounds with emphasis on diabetic ulcers. This review highlights the need for characterization of the biopolymers under research while designing biomaterials to maximize the inherent bioactive potency for better tissue regeneration outcomes, especially in the context of diabetic ulcers.

Biomaterials for immunomodulation in wound healing

The substantial economic impact of non-healing wounds, scarring, and burns stemming from skin injuries is evident, resulting in a financial burden on both patients and the healthcare system. This review paper provides an overview of the skin's vital role in guarding against various environmental challenges as the body's largest protective organ and associated developments in biomaterials for wound healing. We first introduce the composition of skin tissue and the intricate processes of wound healing, with special attention to the crucial role of immunomodulation in both acute and chronic wounds. This highlights how the imbalance in the immune response, particularly in chronic wounds associated with underlying health conditions such as diabetes and immunosuppression, hinders normal healing stages. Then, this review distinguishes between traditional wound-healing strategies that create an optimal microenvironment and recent peptide-based biomaterials that modulate cellular processes and immune responses to facilitate wound closure. Additionally, we highlight the importance of considering the stages of wounds in the healing process. By integrating advanced materials engineering with an in-depth understanding of wound biology, this approach holds promise for reshaping the field of wound management and ultimately offering improved outcomes for patients with acute and chronic wounds.

Chitosan-based films filled with nanoencapsulated essential oil: Physical-chemical characterization and enhanced wound healing activity

The economic burden of chronic wounds, the complexity of the process of tissue repair and the possibility of resistant bacterial infections, have triggered a significant research interest in the application of natural alternative therapies for wound healing. Biomolecules are intrinsically multi-active, as they affect multiple mechanisms involved in tissue repair phenomenon, including immunomodulatory, anti-inflammatory, cell proliferation, extra cellular matrix remodeling and angiogenesis. Chitosan features a unique combination of attributes, including intrinsic hemostatic, antimicrobial, and immunomodulatory properties, that make it an exceptional candidate for wound management, in the development of wound dressings and scaffolds. In this study, we produced nanoemulsions (NE) loaded with SFO, characterized them, and evaluated their tissue repairing properties. Dynamic light scattering (DLS) analysis confirmed the formation of a nanoemulsion with a droplet size of 21.12 ± 2.31 nm and a polydispersity index (PdI) of 0.159, indicating good stability for up to 90 days. To investigate the potential wound healing effects, SFO-loaded NE were applied on male C57BL/6 mice for seven consecutive days, producing a significantly higher wound closure efficiency (p < 0.05) for the group treated with SFO-loaded NE compared to the control group treated with the saline solution. This finding indicates that the SFO-loaded NE exhibits therapeutic properties that effectively promote wound healing in this experimental model. Then, SFO-loaded NE were incorporated into chitosan:polyvinyl alcohol (PVA)-based films. The inclusion of NE into the polymer matrix resulted in increased lipophilicity reflected by the contact angle results, while decreasing moisture absorption, water solubility, and crystallinity. Moreover, FTIR analysis confirmed the formation of new bonds between SFO-NE and the film matrix, which also impacted on porosity properties. Thermal analysis indicated a decrease in the glass transition temperature of the films due to the presence of SFO-NE, suggesting a plasticizing role of NE, confirmed by XRD results, that showed a decrease in the crystallinity of the blend films upon the addition of SFO-NE. AFM images showed no evidence of NE droplet aggregation in the Chitosan:PVA film matrix. Moisture absorption and water content decreased upon incorporation of SFO-loaded NE. Although the inclusion of NE increased hydrophobicity and water contact angle, the values remained within an acceptable range for wound healing applications. Overall, our results emphasize the significant tissue repairing properties of SFO-loaded NE and the potential of Chitosan:PVA films containing nanoencapsulated SFO as effective formulations for wound healing with notable tissue repairing properties.

A novel chitosan-based doxepin nano-formulation for chemotherapy-induced oral mucositis: a randomized, double-blinded, placebo-controlled clinical trial

OBJECTIVES

Considering the prevalence of oral mucositis, we aimed to use the analgesic effects of doxepin with chitosan's antimicrobial and bio-adhesive nature to fabricate a nano-formulation for treating chemotherapy-induced oral mucositis.

MATERIALS AND METHODS

Nanogel was fabricated via ionic gelation and characterized. Sixty patients were randomly divided and received four different treatments for 14 days: diphenhydramine + aluminum-magnesium mouthwash (control), doxepin mouthwash (DOX MW), chitosan nanogel (CN), and doxepin/chitosan nanogel (CN + DOX). Lesions were assessed with four indices, National Cancer Institute (NCI), World Health Organization (WHO), World Conference on Clinical and Research in Nursing (WCCNR) and visual analog scale (VAS) before and 3, 7, and 14 days after interventions. Kruskal-Wallis test was used for pairwise comparison.

RESULTS

CN had semisolid consistency, uniform spherical shape, an average size of 47.93 ± 21.69 nm, and a zeta potential of + 1.02 ± 0.16 mV. CN + DOX reduced WHO, WCCNR, and VAS scores significantly more than the control three days after the intervention. Seven days after the intervention, CN + DOX reduced NCI and WCCNR considerably more than the control; it reduced WCCNR significantly more than CN. Fourteen days after the intervention, CN + DOX decreased NCI markedly more than the control.

CONCLUSION

Chitosan-based doxepin nano-formulation might be a promising alternative for routine treatments of oral mucositis.

Chitosan Sponges for Efficient Accumulation and Controlled Release of C-Phycocyanin

The paper proposed a new porous material for wound healing based on chitosan and C-phycocyanin (C-PC). In this work, C-PC was extracted from the cyanobacteria Arthrospira platensis biomass and purified through ammonium sulfate precipitation. The obtained C-PC with a purity index (PI) of 3.36 ± 0.24 was loaded into a chitosan sponge from aqueous solutions of various concentrations (250, 500, and 1000 mg/L). According to the FTIR study, chitosan did not form new bonds with C-PC, but acted as a carrier. The encapsulation efficiency value exceeded 90%, and the maximum loading capacity was 172.67 ± 0.47 mg/g. The release of C-PC from the polymer matrix into the saline medium was estimated, and it was found 50% of C-PC was released in the first hour and the maximum concentration was reached in 5-7 h after the sponge immersion. The PI of the released C-PC was 3.79 and 4.43 depending on the concentration of the initial solution.

Advance in topical biomaterials and mechanisms for the intervention of pressure injury

Pressure injuries (PIs) are localized tissue damage resulting from prolonged compression or shear forces on the skin or underlying tissue, or both. Different stages of PIs share common features include intense oxidative stress, abnormal inflammatory response, cell death, and subdued tissue remodeling. Despite various clinical interventions, stage 1 or stage 2 PIs are hard to monitor for the changes of skin or identify from other disease, whereas stage 3 or stage 4 PIs are challenging to heal, painful, expensive to manage, and have a negative impact on quality of life. Here, we review the underlying pathogenesis and the current advances of biochemicals in PIs. We first discuss the crucial events involved in the pathogenesis of PIs and key biochemical pathways lead to wound delay. Then, we examine the recent progress of biomaterials-assisted wound prevention and healing and their prospects.

Recent advances in biomimetic hemostatic materials

Although the past decade has witnessed unprecedented medical advances, achieving rapid and effective hemostasis remains challenging. Uncontrolled bleeding and wound infections continue to plague healthcare providers, increasing the risk of death. Various types of hemostatic materials are nowadays used during clinical practice but have many limitations, including poor biocompatibility, toxicity and biodegradability. Recently, there has been a burgeoning interest in organisms that stick to objects or produce sticky substances. Indeed, applying biological adhesion properties to hemostatic materials remains an interesting approach. This paper reviews the biological behavior, bionics, and mechanisms related to hemostasis. Furthermore, this paper covers the benefits, challenges and prospects of biomimetic hemostatic materials.

Stem cell and tissue engineering approaches in pressure ulcer treatment

CONTEXT

Pressure ulcers or injuries, arise from ischemic damage to soft tissues induced by unrelieved pressure over a bony prominence. They are usually difficult to treat with standard medical therapy and often they recur. In the search for better treatment options, promising alternative forms of treatment are today emerging. Within the field of regenerative medicine, ongoing research on advanced therapies seeks to develop medicinal products based on gene therapy, somatic cell therapy, tissue-engineering and combinations of these.

OBJECTIVE

The main objective is to perform an overview of experimental and clinical developments in somatic cell therapy and tissue engineering targeting the treatment of pressure injuries.

METHODS

Searching terms as "PRESSURE ULCER", "STEM CELL THERAPY", "TISSUE ENGINEERING" or "WOUND HEALING" were used in combination or alone, including publications refered to basic and clinical research and focusing on articles showing results obtained in a clinical context. A total of 80 references are cited, including 23 references published in the 3 last years.

RESULTS

The results suggest that this form of treatment could be an interesting option in patients with difficult-to-treat ulcers as spinal cord injury patients.

CONCLUSION

This field of regenerative medicine is very broad and further research is warranted.

Fascia Layer-A Novel Target for the Application of Biomaterials in Skin Wound Healing

As the first barrier of the human body, the skin has been of great concern for its wound healing and regeneration. The healing of large, refractory wounds is difficult to be repaired by cell proliferation at the wound edges and usually requires manual intervention for treatment. Therefore, therapeutic tools such as stem cells, biomaterials, and cytokines have been applied to the treatment of skin wounds. Skin microenvironment modulation is a key technology to promote wound repair and skin regeneration. In recent years, a series of novel bioactive materials that modulate the microenvironment and cell behavior have been developed, showing the ability to efficiently facilitate wound repair and skin attachment regeneration. Meanwhile, our lab found that the fascial layer has an indispensable role in wound healing and repair, and this review summarizes the research progress of related bioactive materials and their role in wound healing.

Chitosan and carboxymethyl cellulose-based 3D multifunctional bioactive hydrogels loaded with nano-curcumin for synergistic diabetic wound repair

Biopolymer-based thermoresponsive injectable hydrogels with multifunctional tunable characteristics containing anti-oxidative, biocompatibility, anti-infection, tissue regeneration, and/or anti-bacterial are of abundant interest to proficiently stimulate diabetic wound regeneration and are considered as a potential candidate for diversified biomedical application but the development of such hydrogels remains a challenge. In this study, the Chitosan-CMC-g-PF127 injectable hydrogels are developed using solvent casting. The Curcumin (Cur) Chitosan-CMC-g-PF127 injectable hydrogels possess viscoelastic behavior, good swelling properties, and a controlled release profile. The degree of substitution (% DS), thermal stability, morphological behavior, and crystalline characteristics of the developed injectable hydrogels is confirmed using nuclear magnetic resonance (¹H NMR), thermogravimetric analysis, scanning electron microscopy (SEM), and x-ray diffraction analysis (XRD), respectively. The controlled release of cur-micelles from the hydrogel is evaluated by drug release studies and pharmacokinetic profile (PK) using high-performance liquid chromatography (HPLC). Furthermore, compared to cur micelles the Cur-laden injectable hydrogel shows a significant increase in half-life (t_1/2) up to 5.92 ± 0.7 h, mean residence time (MRT) was 15.75 ± 0.76 h, and area under the first moment curve (AUMC) is 3195.62 ± 547.99 μg/mL*(h)² which reveals the controlled release behavior. Cytocompatibility analysis of Chitosan-CMC-g-PF127 hydrogels using 3T3-L1 fibroblasts cells and in vivo toxicity by subcutaneous injection followed by histological examination confirmed good biocompatibility of Cur-micelles loaded hydrogels. The histological results revealed the promising tissue regenerative ability and shows enhancement of fibroblasts, keratinocytes, and collagen deposition, which stimulates the epidermal junction. Interestingly, the Chitosan-CMC-g-PF127 injectable hydrogels ladened Cur exhibited a swift wound repair potential by up-surging the cell migration and proliferation at the site of injury and providing a sustained drug delivery platform for hydrophobic moieties.

Advancements and Utilizations of Scaffolds in Tissue Engineering and Drug Delivery

The drug development process requires a thorough understanding of the scaffold and its three-dimensional structure. Scaffolding is a technique for tissue engineering and the formation of contemporary functioning tissues. Tissue engineering is sometimes referred to as regenerative medicine. They also ensure that drugs are delivered with precision. Information regarding scaffolding techniques, scaffolding kinds, and other relevant facts, such as 3D nanostructuring, are discussed in depth in this literature. They are specific and demonstrate localized action for a specific reason. Scaffold's acquisition nature and flexibility make it a new drug delivery technology with good availability and structural parameter management.

A Review on Chitosan and Cellulose Hydrogels for Wound Dressings

Wound management remains a challenging issue around the world, although a lot of wound dressing materials have been produced for the treatment of chronic and acute wounds. Wound healing is a highly dynamic and complex regulatory process that involves four principal integrated phases, including hemostasis, inflammation, proliferation, and remodeling. Chronic non-healing wounds are wounds that heal significantly more slowly, fail to progress to all the phases of the normal wound healing process, and are usually stalled at the inflammatory phase. These wounds cause a lot of challenges to patients, such as severe emotional and physical stress and generate a considerable financial burden on patients and the general public healthcare system. It has been reported that about 1-2% of the global population suffers from chronic non-healing wounds during their lifetime in developed nations. Traditional wound dressings are dry, and therefore cannot provide moist environment for wound healing and do not possess antibacterial properties. Wound dressings that are currently used consist of bandages, films, foams, patches and hydrogels. Currently, hydrogels are gaining much attention as a result of their water-holding capacity, providing a moist wound-healing milieu. Chitosan is a biopolymer that has gained a lot of attention recently in the pharmaceutical industry due to its unique chemical and antibacterial nature. However, with its poor mechanical properties, chitosan is incorporated with other biopolymers, such as the cellulose of desirable biocompatibility, at the same time having the improved mechanical and physical properties of the hydrogels. This review focuses on the study of biopolymers, such as cellulose and chitosan hydrogels, for wound treatment.

Recent Progress in Development of Dressings Used for Diabetic Wounds with Special Emphasis on Scaffolds

Diabetic wound (DW) is a secondary application of uncontrolled diabetes and affects about 42.2% of diabetics. If the disease is left untreated/uncontrolled, then it may further lead to amputation of organs. In recent years, huge research has been done in the area of wound dressing to have a better maintenance of DW. These include gauze, films, foams or, hydrocolloid-based dressings as well as polysaccharide- and polymer-based dressings. In recent years, scaffolds have played major role as biomaterial for wound dressing due to its tissue regeneration properties as well as fluid absorption capacity. These are three-dimensional polymeric structures formed from polymers that help in tissue rejuvenation. These offer a large surface area to volume ratio to allow cell adhesion and exudate absorbing capacity and antibacterial properties. They also offer a better retention as well as sustained release of drugs that are directly impregnated to the scaffolds or the ones that are loaded in nanocarriers that are impregnated onto scaffolds. The present review comprehensively describes the pathogenesis of DW, various dressings that are used so far for DW, the limitation of currently used wound dressings, role of scaffolds in topical delivery of drugs, materials used for scaffold fabrication, and application of various polymer-based scaffolds for treating DW.

Acceleration of Healing in Full-Thickness Wound by Chitosan-Binding bFGF and Antimicrobial Peptide Modification Chitosan Membrane

Skin wound healing is an important clinical challenge, and the main treatment points are accelerating epidermal regeneration and preventing infection. Therefore, it is necessary to develop a wound dressing that can simultaneously cure bacterial infections and accelerate wound healing. Here, we report a multifunctional composite wound dressing loaded with chitosan (CS)-binding bFGF (CSBD-bFGF) and antimicrobial peptides (P5S9K). First, CS was used as the dressing matrix material, and P5S9K was encapsulated in CS. Then, CSBD-bFGF was designed by combining recombinant DNA technology and tyrosinase treatment and modified on the dressing material surface. The results show that the binding ability of CSBD-bFGF and CS was significantly improved compared with that of commercial bFGF, and CSBD-bFGF could be controllably released from the CS dressing. More importantly, the prepared dressing material showed excellent antibacterial activity in vivo and in vitro and could effectively inhibit the growth of E. coli and S. aureus. Using NIH3T3 cells as cellular models, the results showed that the CSBD-bFGF@CS/P5S9K composite dressing was a friendly material for cell growth. After cells were seeded on the composite dressing surface, collagen-1 (COL-1) and vascular endothelial growth factor (VEGF) genes expression in cells were significantly upregulated. Finally, the full-thickness wound of the rat dorsal model was applied to analyse the tissue repair ability of the composite dressing. The results showed that the composite dressing containing CSBD-bFGF and P5S9K had the strongest ability to repair skin wounds. Therefore, the CSBD-bFGF@CS/P5S9K composite dressing has good antibacterial and accelerated wound healing abilities and has good application prospects in the treatment of skin wounds.

Chitosan hydrogels incorporating colloids for sustained drug delivery

In today's biomedical research, a huge effort is being made towards the development of efficient drug delivery systems, achieving sustainable and controlled delivery of drugs. Chitosan (CS) hydrogels are high water content materials with very relevant biological properties to that purpose. Their use for a local and delayed delivery has already been demonstrated for a wide variety of therapeutic agents. One relatively recent strategy to improve these CS-based systems consists in the insertion of colloids, embedding drugs, within their three-dimensional matrix. This provides a second barrier to the diffusion of drugs through the system, and allows to better control their release. The main objective of this review is to report the many existing complex systems composed of CS hydrogels embedding different types of colloids used as drug delivery devices to delay the release of drugs. The various biomedical applications of such final systems are also detailed in this review.

Liquiritin reduces lipopolysaccharide-aroused HaCaT cell inflammation damage via regulation of microRNA-31/MyD88

BACKGROUND

Pressure ulcers are a common issue for people who have limited mobility. This study tested the impact of liquiritin on human keratinocyte HaCaT cell inflammatory damage aroused by lipopolysaccharide (LPS).

METHODS

HaCaT cells were underwent LPS and/or liquiritin incubation. Cell viability, apoptosis and inflammatory molecules interleukin 6 (IL-6), tumor necrosis factor α (TNF-α) and cyclooxygenase-2 (Cox-2) expressions, along with nuclear factor kappa B (NF-κB) and c-Jun N-terminal kinase (JNK) pathways activities were tested by MTT assay, Guava Nexin assay, ELISA and western blotting, respectively. qRT-PCR was done for measuring microRNA-31 (miR-31) expression. miR-31 inhibitor was transfected to silence miR-31. Animal pressure ulcers was established on the dorsal skin of adult rats. The effects of liquiritin on wound healing were analyzed by measuring wound closure rates.

RESULTS

LPS aroused HaCaT cell inflammatory damage, as evidenced by the decrease of cell viability, increase of cell apoptosis and enhanced expressions of IL-6, TNF-α and Cox-2. Liquiritin protected HaCaT cells against LPS-aroused inflammatory damage through increasing cell viability, decreasing cell apoptosis, and reducing IL-6, TNF-α and Cox-2 expressions. Liquiritin attenuated the LPS-aroused NF-κB and JNK pathways activation in HaCaT cells. Rat pressure ulcers model also confirmed that liquiritin promoted wound healing. In mechanism, miR-31 expression was boosted by liquiritin in HaCaT cells. Silencing miR-31 weakened the impacts of liquiritin on LPS-irritated HaCaT cells. Myeloid differentiation factor 88 (MyD88) was a target of miR-31 in HaCaT cells.

CONCLUSION

This research affirmed the beneficial impact of liquiritin on pressure ulcers. Liquiritin reduced LPS-aroused HaCaT cell inflammatory damage might be implemented via raising miR-31 expression, lowering MyD88 expression, and repressing NF-κB and JNK pathways.

Prospection of chitosan and its derivatives in wound healing: Proof of patent analysis (2010-2020)

Disruption in the normal anatomy and physiology of the skin often leads to wound formation. Its healing is a pretty complex and dynamic biological process with different phases. While there are many biopolymers (and their derivatives) for wound healing purposes. One of the most popular, promising, progressive and attention-grabbing biopolymers is 'chitosan'. It is a polysaccharide biopolymer that has tremendous potential in augmenting the process of wound healing. Most importantly, the derivatives of chitosan have heavily attracted the scientific community's attention to employing them in various formulations for wound healing applications. The prime focus of the present review is to provide scientific and technological prospection about chitosan and its derivatives for wound healing activity, starting from 2010 to 2020. Besides, the review also focuses about toxicity, different formulations and products of chitosan that are currently under clinical trials for wound healing purposes are described. Through this review, we present evidence that abundantly confirms that there is a growing interest in the domain of wound healing using novel, inventive, useful and patent protected chitosan derivatives. We speculate the possibility of more patent protected chitosan derivatives in the future for wound healing applications.

Reviewing the potential use of scaffold-mediated localized chemotherapy in oncology

Post-surgical recurrence and metastasis remain to be the major concern in oncology. The absence of any therapeutic modality during the interim period between the surgical intervention and initiation of conventional radiotherapy and chemotherapy allows the residual cancer cells to proliferate, culminating in recurrence and/or metastasis. Introducing a therapeutic modality during this interim period could suppress the proliferation of the residual tumor cells. Further, as the detrimental effects of conventional chemotherapy and radiotherapy drastically reduce the patient’s quality of life, use of therapeutic modality with localized effect can reduce the risk of systemic toxicity. Thus, the present manuscript reviews the potential use of scaffold-mediated local chemotherapy in oncology. Its localized effect would prevent systemic toxicity, while the scaffold serves as an ideal vehicle for the sustained targeted delivery of therapeutic agents.

Carboxymethyl chitosan hydrogel formulations enhance the healing process in experimental partial-thickness (second-degree) burn wound healing

PURPOSE

This study aimed to elaborate a hydrogel constituted by carboxymethyl chitosan (CMC), hyaluronic acid (HA) and silver (Ag) and to evaluate its healing effect on partial-thickness burn wounds experimentally induced in rats.

METHODS

CMC was obtained by chitosan reacting with monochloroacetic acid. The carboxymethylation was confirmed by Fourier-transform infrared spectroscopy and hydrogen nuclear magnetic resonance (NMR). Scanning electron microscopy was used to determine the morphologicalcharacteristics of chitosan and CMC. After the experimental burn wound induction, the animals (n = 126) were treated with different CMC formulations, had their occlusive dressings changed daily and were followed through 7, 14 and 30 days. Morphometric, macroscopic and microscopic aspects and collagen quantification were evaluated.

RESULTS

Significative wound contraction, granulation tissue formation, inflammatory infiltration and collagen fibers deposit throughout different phases of the healing process were observed in the CMC hydrogels treated groups.

CONCLUSIONS

The results showed that, in the initial phase of the healing process, the most adequate product was the CMC/HA/Ag association, while in the other phases the CMC/HA association was the best one to promote the healing of burn wounds.

Gene therapy in wound healing using nanotechnology

Wound healing is a complex and highly regulated process that is susceptible to a variety of failures leading to delayed wound healing or chronic wounds. This is becoming an increasingly global burden on the healthcare system. Treatment of wounds has evolved considerably to overcome barriers to wound healing especially within the field of regenerative medicine that focuses on the replacement of tissues or organs. Improved understanding of the pathophysiology of wound healing has enabled current advances in technology to allow better optimization of microenvironment within wounds. This approach may help tackle wounds that are difficult to treat and help reduce the global burden of the disease. This article provides an overview of the physiology in wound healing and the application of gene therapy using nanotechnology in the management of wounds.

IGF-1C domain-modified chitosan hydrogel accelerates cutaneous wound healing by promoting angiogenesis

Background: Complete regeneration after skin injury remains a critical clinical challenge. Hydrogels, modified with growth factors or mimicking peptides, have been applied for functional tissue regeneration by increasing the bioactivity of engineered matrices. Methodology & results: We synthesized an injectable biological hydrogel, C domain of IGF-1 (IGF-1C)-modified chitosan (CS-IGF-1C) hydrogel. Mouse model of cutaneous wound healing was established to investigate whether this hydrogel could promote wound healing. Our results demonstrated that CS-IGF-1C hydrogel exhibited superior proangiogenic effects, resulting in accelerated wound closure and improved extracellular matrix remodeling. Bioluminescence imaging and histology analysis confirmed the proangiogenic role of CS-IGF-1C hydrogel. Conclusion: CS-IGF-1C hydrogel could accelerate cutaneous wound healing by stimulating angiogenesis.

Tissue Engineering and Regenerative Medicine in Craniofacial Reconstruction and Facial Aesthetics

The craniofacial region is anatomically complex and is of critical functional and cosmetic importance, making reconstruction challenging. The limitations of current surgical options highlight the importance of developing new strategies to restore the form, function, and esthetics of missing or damaged soft tissue and skeletal tissue in the face and cranium. Regenerative medicine (RM) is an expanding field which combines the principles of tissue engineering (TE) and self-healing in the regeneration of cells, tissues, and organs, to restore their impaired function. RM offers many advantages over current treatments as tissue can be engineered for specific defects, using an unlimited supply of bioengineered resources, and does not require immunosuppression. In the craniofacial region, TE and RM are being increasingly used in preclinical and clinical studies to reconstruct bone, cartilage, soft tissue, nerves, and blood vessels. This review outlines the current progress that has been made toward the engineering of these tissues for craniofacial reconstruction and facial esthetics.

Safety of Human Adipose Stromal Vascular Fraction Cells Isolated with a Closed System Device in an Immunocompetent Murine Pressure Ulcer Model

Pressure ulcers (PUs) result in part due to ischemia-reperfusion injury to the skin and present frequently in elderly or quadriplegic patients with reduced mobility. Despite the high economic and societal cost of this condition, PU therapy relies primarily on preventive strategies and invasive surgical intervention. A growing body of clinical literature suggests that localized injection of adipose-derived cells can accelerate and enhance the closure of PUs. The current study systematically evaluated the safety of human adipose stromal vascular fraction (SVF) cells isolated using a closed system device when injected into a murine PU injury model. The human SVF cells were characterized by colony-forming unit-fibroblast and differentiation assays before use. Young (2 months) immunocompetent C57BL/6 mice subjected to a magnet-induced ischemia-reperfusion injury were injected subcutaneously with human SVF cells at increasing doses (0.25-2 million cells). The size of the PU was monitored over a 20-day period. Both female and male mice tolerated the concentration-dependent injection of the SVF cells without complications. While male mice trended toward more rapid wound closure rates in response to lower SVF cell concentrations (0.25-0.5 million cells), female mice responded favorably to higher SVF cell concentrations (1-2 million cells); however, outcomes did not reach statistical significance in either sex. Overall, the study demonstrates that human SVF cells prepared with a closed system device designed for use at point of care can be safely administered for PU therapy in an immunocompetent host animal model.

Safety and Efficacy of Human Adipose-Derived Stromal/Stem Cell Therapy in an Immunocompetent Murine Pressure Ulcer Model

Pressure injuries/ulcers are frequent complications in elderly, paraplegic, and quadriplegic patients, which account for considerable cost to the international health care economy and remain refractory to current treatment options. Autologous or allogeneic adult stromal/stem cells represent an alternative therapeutic approach. The current study extends prior findings by exploring the safety and efficacy of human adipose-derived stromal/stem cell (ASC) therapy in an established immunocompetent murine skin pressure ulcer model where dermal fibroblast cells (DFCs) served as a control. Human adipose tissue was processed using a closed system device designed for point-of-care use in the operating room and on file with the Food and Drug Administration. Cell characterization was performed using colony-forming unit-fibroblast, differentiation, and immunophenotypic assays in vitro. Wound healing was assessed over a 20-day period based on photomicrographs, histology, and immunohistochemistry. The isolated human ASCs displayed significantly greater colony formation relative to DFCs while both populations exhibited comparable immunophenotype and differentiation potential. Both fresh and cryopreserved human ASCs significantly accelerated and enhanced wound healing in young (2 month) mice of both sexes relative to DFC controls based on tissue architecture and CD68⁺ cell infiltration. In contrast, while injection of either fresh or cryopreserved human ASCs was safe in older mice, the fresh ASCs significantly enhanced wound closure relative to the cryopreserved ASCs. Overall, these findings support the safety and efficacy of human ASCs isolated using a closed system device designed for clinical procedures in the future treatment of pressure injuries.

Current Development on Chitosan-based Antimicrobial Drug Formulations for the Wound Healing

BACKGROUND

Derived from polyose, chitosan is an outstanding natural linear polysaccharide comprised of random arrangement of β-(1-4)-linked D-Glucosamine and N-acetyl-DGlucosamine units.

OBJECTIVE

Researchers have been using chitosan as a network forming or gelling agent with economically available, present polyose, low immunogenicity, biocompatibility, non-toxicity, biodegradability, protects against secretion from irritation and don't suffer the danger of transmission animal infective agent.

METHODS

Furthermore, recent studies gear up the chitosan used in the development of various biopharmaceutical formulations, including nanoparticles, hydrogels, implants, films, fibers, etc. Results: These formulations produce potential activities as antimicrobials, cancer treatment, medical aid, and wound healing, controlled unleash device or drug trigger retarding device and 3DBiomedical sponge, etc. Conclusion: The present article discusses the development of various drug formulations utilizing chitosan as biopolymers for the repairing of broken tissues and healing in case of wound infection.

Biopolymer-based biomaterials for accelerated diabetic wound healing: A critical review

Non-healing, chronic wounds place a huge burden on healthcare systems as well as individual patients. These chronic wounds especially diabetic wounds will ultimately lead to compromised mobility, amputation of limbs and even death. Currently, wounds and limb ulcers associated with diabetes remain significant health issues; the associated healthcare cost ultimately leads to the increased clinical burden. The presence of diabetes interrupts a highly coordinated cascade of events in the wound closure process. Advances in the understanding of pathophysiological conditions associated with diabetic wounds lead to the development of drug delivery systems which can enhance wound healing by targeting various phases of the impaired processes. Wound environments typically contain degradative enzymes, along with an elevated pH and demonstrate a physiological cascade involved in the regeneration of tissue, which requires the application of an effective delivery system. This article aims to review the pathophysiological conditions associated with chronic and diabetic wounds. The delivery systems, involved in their treatment are described, highlighting potential biomaterials and polymers for establishing drug delivery systems, specifically for the treatment of diabetic wounds and the promotion of the associated mechanisms involved in advanced wound healing. Emerging approaches and engineered devices for effective wound care are reported. The discussion will give insight into the mechanisms relevant to all stages of wound healing.

Linking microvascular collapse to tissue hypoxia in a multiscale model of pressure ulcer initiation

Pressure ulcers are devastating injuries that disproportionately affect the older adult population. The initiating factor of pressure ulcers is local ischemia, or lack of perfusion at the microvascular level, following tissue compression against bony prominences. In turn, lack of blood flow leads to a drop in oxygen concentration, i.e, hypoxia, that ultimately leads to cell death, tissue necrosis, and disruption of tissue continuity. Despite our qualitative understanding of the initiating mechanisms of pressure ulcers, we are lacking quantitative knowledge of the relationship between applied pressure, skin mechanical properties as well as structure, and tissue hypoxia. This gap in our understanding is, at least in part, due to the limitations of current imaging technologies that cannot simultaneously image the microvascular architecture, while quantifying tissue deformation. We overcome this limitation in our work by combining realistic microvascular geometries with appropriate mechanical constitutive models into a microscale finite element model of the skin. By solving boundary value problems on a representative volume element via the finite element method, we can predict blood volume fractions in response to physiological skin loading conditions (i.e., shear and compression). We then use blood volume fraction as a homogenized variable to couple tissue-level skin mechanics to an oxygen diffusion model. With our model, we find that moderate levels of pressure applied to the outer skin surface lead to oxygen concentration contours indicative of tissue hypoxia. For instance, we show that applying a pressure of 60 kPa at the skin surface leads to a decrease in oxygen partial pressure from a physiological value of 65 mmHg to a hypoxic level of 31 mmHg. Additionally, we explore the sensitivity of local oxygen concentration to skin thickness and tissue stiffness, two age-related skin parameters. We find that, for a given pressure, oxygen concentration decreases with decreasing skin thickness and skin stiffness. Future work will include rigorous calibration and validation of this model, which may render our work an important tool toward developing better prevention and treatment tools for pressure ulcers specifically targeted toward the older adult patient population.

Human embryonic stem cell-derived exosomes promote pressure ulcer healing in aged mice by rejuvenating senescent endothelial cells

Background

Angiogenesis, as an endogenous repair mechanism, plays crucial roles in wound healing and tissue regeneration. However, this process is impaired in the elderly due to aging-related vascular endothelial dysfunction. This study was aimed to explore the pro-angiogenic effects of exosomes from human embryonic stem cells (ESC-Exos) in aged mice of pressure-induced ulcer model and the underlying mechanism.

Methods

Pressure ulcer wounds were created on the back of d-galactose-induced aging mice. ESC-Exos were locally applied onto the wound beds, with PBS as control. The effects of ESC-Exos on wound healing were analyzed by measuring wound closure rates, histological and immunofluorescence analyses. Then, the anti-aging effect of ESC-Exos on vascular endothelial cells was tested in an in vitro d-galactose-induced HUVEC senescence model.

Results

ESC-Exos could accelerate wound closure and enhance angiogenesis, and the senescence of vascular endothelial cells was significantly ameliorated after ESC-Exos treatment. In vitro, ESC-Exos could rejuvenate the senescence of endothelial cells and recover compromised proliferation, migratory capacity, and tube formation. This recovery was Nrf2-activation-dependent, since cotreatment with Nrf2 inhibitor Brusatol could abolish the rejuvenative effects of ESC-Exos. Further study revealed that miR-200a was highly enriched in ESC-Exos and played a crucial role in ESC-Exos-mediated rejuvenation through downregulating Keap1, which negatively regulates Nrf2 expression.

Conclusions

ESC-Exos ameliorate endothelial senescence by activating Nrf2 and recover aging-related angiogenic dysfunction, thereby accelerating wound healing in aged mice. ESC-Exos might be a natural nano-biomaterial for aging-related diseases therapy.

Electronic supplementary material

The online version of this article (10.1186/s13287-019-1253-6) contains supplementary material, which is available to authorized users.

Application of polycaprolactone, chitosan, and collagen composite as a nanofibrous mat loaded with silver sulfadiazine and growth factors for wound dressing

Fabrication of nanofibrous biomaterials composed of natural and synthetic materials that incorporated with antibiotic and growth factors with controlled release manner is an attractive topic in wound healing. The purpose of this study was to prepare optimal composite of materials as biomimetic nanofibrous mats for application in wound healing. The mat was prepared of polycaprolactone (PCL) in the bottom, chitosan/poly ethylene oxide (Cs/PEO) in the middle, and PCL/collagen (PCL/Coll) in the top layer. A panel of standard characterization tests of nanofibrous mat was performed and its compatibilities in strength and integration were confirmed. Middle layer was loaded with epidermal growth factor (EGF) and basic fibroblast growth factor (bFGF), and silver sulfadiazine (SSD) was incorporated in the bottom layer as an anti-infection factor. Then, on the dorsum of rats, a 400-mm² wound was created and surrounded by a silicone ring to control the usual tissue contractions. Nanofibrous mats with or without growth factors were applied as wound dressings and at day 14, the healing process was evaluated. At day 14, the treated group by designed mat showed faster epithelialization and angiogenesis. Silicone ring in the test group was desirable in wound closure compared to the control group. Reformation of skin tissue was manifested in a shorter time. This composite nanofibrous mat could be introduced as a dynamic and effective candidate for wound dressing.

Biomedical Potential of Ultrafine Ag Nanoparticles Coated on Poly (Gamma-Glutamic Acid) Hydrogel with Special Reference to Wound Healing

In wound care management, the prevention of wound infection and the retention of an appropriate level of moisture are two major challenges. Therefore, designing an excellent antibacterial hydrogel with a suitable water-adsorbing capacity is very important to improve the development of wound dressings. In this paper, a novel silver nanoparticles/poly (gamma-glutamic acid) (γ-PGA) composite dressing was prepared for biomedical applications. The promoted wound-healing ability of the hydrogels were systematically evaluated with the aim of attaining a novel and effective wound dressing. A diffusion study showed that hydrogels can continuously release antibacterial factors (Ag). Hydrogels contain a high percentage of water, providing an ideal moist environment for tissue regeneration, while also preventing contraction of the wound. Moreover, an in vivo, wound-healing model evaluation of artificial wounds in mice indicated that silver/γ-PGA hydrogels could significantly promote wound healing. Histological examination revealed that hydrogels can successfully help to reconstruct intact epidermis and collagen deposition during 14 days of impaired wound healing. Overall, this research could shed new light on the design of antibacterial silver/γ-PGA hydrogels with potential applications in wound dressing.

A functional chitosan-based hydrogel as a wound dressing and drug delivery system in the treatment of wound healing

Functional active wound dressings are expected to provide a moist wound environment, offer protection from secondary infections, remove wound exudate and accelerate tissue regeneration, as well as to improve the efficiency of wound healing. Chitosan-based hydrogels are considered as ideal materials for enhancing wound healing owing to their biodegradable, biocompatible, non-toxic, antimicrobial, biologically adhesive, biological activity and hemostatic effects. Chitosan-based hydrogels have been demonstrated to promote wound healing at different wound healing stages, and also can alleviate the factors against wound healing (such as excessive inflammatory and chronic wound infection). The unique biological properties of a chitosan-based hydrogel enable it to serve as both a wound dressing and as a drug delivery system (DDS) to deliver antibacterial agents, growth factors, stem cells and so on, which could further accelerate wound healing. For various kinds of wounds, chitosan-based hydrogels are able to promote the effectiveness of wound healing by modifying or combining with other polymers, and carrying different types of active substances. In this review, we will take a close look at the application of chitosan-based hydrogels in wound dressings and DDS to enhance wound healing.

Growth Factor Delivery Systems for Tissue Engineering and Regenerative Medicine

Growth factors (GFs) are often a key component in tissue engineering and regenerative medicine approaches. In order to fully exploit the therapeutic potential of GFs, GF delivery vehicles have to meet a number of key design criteria such as providing localized delivery and mimicking the dynamic native GF expression levels and patterns. The use of biomaterials as delivery systems is the most successful strategy for controlled delivery and has been translated into different commercially available systems. However, the risk of side effects remains an issue, which is mainly attributed to insufficient control over the release profile. This book chapter reviews the current strategies, chemistries, materials and delivery vehicles employed to overcome the current limitations associated with GF therapies.

Microparticles to enhance delivery of drugs and growth factors into wound sites

Microparticles with controlled size and morphology are of significant interest in the field of drug delivery. Although advanced nanoparticles have been the object of a substantial number of reviews, fewer have focused on microparticles, especially for the delivery of drugs and growth factors to the wound site. Microparticles show distinct advantages, including ease of production and characterization, extended release properties, high drug loading and little concern about the toxicity as compared with the nanosized systems. This review presents an introduction to the pathophysiology of wound healing and provides an overview of some of the recent advances in microparticle-based drugs and growth factors delivery to wound sites.

Current Advancements and Strategies in Tissue Engineering for Wound Healing: A Comprehensive Review

Significance: With an aging population leading to an increase in diabetes and associated cutaneous wounds, there is a pressing clinical need to improve wound-healing therapies. Recent Advances: Tissue engineering approaches for wound healing and skin regeneration have been developed over the past few decades. A review of current literature has identified common themes and strategies that are proving successful within the field: The delivery of cells, mainly mesenchymal stem cells, within scaffolds of the native matrix is one such strategy. We overview these approaches and give insights into mechanisms that aid wound healing in different clinical scenarios. Critical Issues: We discuss the importance of the biomimetic niche, and how recapitulating elements of the native microenvironment of cells can help direct cell behavior and fate. Future Directions: It is crucial that during the continued development of tissue engineering in wound repair, there is close collaboration between tissue engineers and clinicians to maintain the translational efficacy of this approach.