Biodegradable hydrogels based on novel photopolymerizable guar gum-methacrylate macromonomers for in situ fabrication of tissue engineering scaffolds

Highly swellable, cytocompatible and biodegradeable guar gum-based hydrogel system for controlled release of bioactive components of liquorice (Glycyrrhiza glabra L.): Synthesis and evaluation

Glycyrrhiza glabra Linn (liquorice) has been widely used for therapeutic purposes to treat digestive disorders, immunomodulatory disorders, inflammatory disorders, diabetes, viral infections, and cancer. Liquorice contains a wide variety of bioactive compounds, including glycyrrhizin, flavonoids, and terpenoids. Several factors compromise their therapeutic efficacy, such as poor pharmacokinetic profiles and physicochemical properties. Therefore, to improve its overall effectiveness, liquorice solid dispersion (LSD) was incorporated into biopolymer-based guar gum-grafted-2-acrylamido-2-methylpropane sulfonic acid (Guar gum-g-AMPS) hydrogels designed for controlled delivery via the oral route and characterized. The qualitative analysis of LSD revealed 51 compounds. Hydrogel structural properties were assessed for their effect on swelling and release. The highest swelling ratio (6413 %) and drug release (84.12 %) occurred at pH 1.2 compared to pH 7.4 (swelling ratio of 2721 % and drug release of 79.36 %) in 48 h. The hydrogels exhibited high porosity (84.23 %) and biodegradation (9.30 % in 7 days). In vitro hemolysis tests have demonstrated the compatibility of the hydrogel with blood. CCK-8 assay confirmed the biocompatibility of the synthesized hydrogel using osteoblasts and RIN-m5f cells. LSD exhibited good anti-inflammatory activity when loaded into hydrogels after being subjected to protein denaturation experiments. Moreover, LSD-loaded hydrogels have good antioxidant and antibacterial properties.

Tissue regeneration properties of hydrogels derived from biological macromolecules: A review

The successful tissue engineering depends on the development of biologically active scaffolds that possess optimal characteristics to effectively support cellular functions, maintain structural integrity and aid in tissue regeneration. Hydrogels have emerged as promising candidates in tissue regeneration due to their resemblance to the natural extracellular matrix and their ability to support cell survival and proliferation. The integration of hydrogel scaffold into the polymer has a variable impact on the pseudo extracellular environment, fostering cell growth/repair. The modification in size, shape, surface morphology and porosity of hydrogel scaffolds has consequently paved the way for addressing diverse challenges in the tissue engineering process such as tissue architecture, vascularization and simultaneous seeding of multiple cells. The present review provides a comprehensive update on hydrogel production using natural and synthetic biomaterials and their underlying mechanisms. Furthermore, it delves into the application of hydrogel scaffolds in tissue engineering for cardiac tissues, cartilage tissue, adipose tissue, nerve tissue and bone tissue. Besides, the present article also highlights various clinical studies, patents, and the limitations associated with hydrogel-based scaffolds in recent times.

Development of biomedical hydrogels for rheumatoid arthritis treatment

Rheumatoid Arthritis (RA) is an autoimmune disorder that hinders the normal functioning of bones and joints and reduces the quality of human life. Every year, millions of people are diagnosed with RA worldwide, particularly among elderly individuals and women. Therefore, there is a global need to develop new biomaterials, medicines and therapeutic methods for treating RA. This will improve the Healthcare Access and Quality Index and also relieve administrative and financial burdens on healthcare service providers at a global scale. Hydrogels are soft and cross-linked polymeric materials that can store a chunk of fluids, drugs and biomolecules for hydration and therapeutic applications. Hydrogels are biocompatible and exhibit excellent mechanical properties, such as providing elastic cushions to articulating joints by mimicking the natural synovial fluid. Hence, hydrogels create a natural biological environment within the synovial cavity to reduce autoimmune reactions and friction. Hydrogels also lubricate the articulating joint surfaces to prevent degradation of synovial surfaces of bones and cartilage, thus exhibiting high potential for treating RA. This work reviews the progress in injectable and implantable hydrogels, synthesis methods, types of drugs, advantages and challenges. Additionally, it discusses the role of hydrogels in targeted drug delivery, mechanistic behaviour and tribological performance for RA treatment.

The recent development of carbon-based nanoparticles as a novel approach to skin tissue care and management - A review

Since the skin is the first barrier of the body's defense against pathogens, delays in the healing process are affected by infections. Therefore, applying advanced substitute assistance improves the patient's quality of life. Carbon-based nanomaterials show better capabilities than conventional methods for managing skin wound infections. Due to their physicochemical properties such as small size, large surface area, great surface-to-volume ratio, and excellent ability to communicate with the cells and tissue, carbon-based nanoparticles have been considered in regenerative medicine. moreover, the carbon nano family offers attractive potential in wound healing via the improvement of angiogenesis and antibacterial compared to traditional approaches become one of the particular research interests in the field of skin tissue engineering. This review emphasizes the wound-healing process and the role of carbon-based nanoparticles in wound care management interaction with tissue engineering technology.

Double Photocrosslinked Responsive Hydrogels Based on Hydroxypropyl Guar

Double crosslinked hydrogels based on a biodegradable polymer were prepared by photocopolymerization of methacrylated hydroxypropyl guar (HPG-MA) and 3-acrylamidophenylboronic acid. Along with irreversible strong covalent crosslinks by methacrylic groups, these hydrogels contained labile boronate crosslinks formed as a result of the interaction of boronic acid with cis-diol moieties of HPG. These hydrogels demonstrated higher elasticity than HPG-MA hydrogels with only irreversible covalent crosslinks. Labile boronate crosslinks not only strengthened the hydrogels but also imparted to them pronounced responsive properties. It was demonstrated that the mechanical properties, the swelling behavior, as well as the uptake and release of some substances from the double crosslinked hydrogel were pH controlled. For instance, the hydrogels could release cationic disinfectant at a rate regulated by pH. Such photocrosslinkable in situ forming hydrogels are very promising for the production of smart coatings that release targeted substances at the desired rate.

Photocrosslinkable gelatin-treated dentin matrix hydrogel as a novel pulp capping agent for dentin regeneration: I. synthesis, characterizations and grafting optimization

BACKGROUND

In recent years, treated dentin matrix (TDM) has been introduced as a bioactive hydrogel for dentin regeneration in DPC. However, no study has introduced TDM as a photocrosslinkable hydrogel with a natural photoinitiating system. Therefore, the present study aimed to explore the synthesis, characterizations and grafting optimization of injectable gelatin- glycidyl methacrylate (GMA)/TDM hydrogels as a novel photocrosslinkable pulp capping agent for dentin regeneration.

METHODS

G-GMA/TDM hydrogel was photocrosslinked using a new two-component photoinitiating system composed of riboflavin as a photoinitiator under visible light and glycine as a first time coinitiator with riboflavin. The grafting reaction conditions of G-GMA/TDM e.g. GMA concentration and reaction time were optimized. The kinetic parameters e.g. grafting efficiency (GE) and grafting percentage (GP%) were calculated to optimize the grafting reaction, while yield (%) was determined to monitor the formation of the hydrogel. Moreover, G-GMA/TDM hydrogels were characterized by swelling ratio, degradation degree, and cytotoxicity. The instrumental characterizations e.g. FTIR, 1H-NMR, SEM and TGA, were investigated for verifying the grafting reaction. Statistical analysis was performed using F test (ANOVA) and Post Hoc Test (P = 0.05).

RESULTS

The grafting reaction dramatically increased with an increase of both GMA concentration and reaction time. It was realized that the swelling degree and degradation rate of G-GMA/TDM hydrogels were significantly reduced by increasing the GMA concentration and prolonging the reaction time. When compared to the safe low and moderate GMA content hydrogels (0.048, 0.097 M) and shorter reaction times (6, 12, 24 h), G-GMA/TDM with high GMA contents (0.195, 0.391 M) and a prolonged reaction time (48 h) demonstrated cytotoxic effects against cells using the MTT assay. Also, the morphological surface of G-GMA/TDM freeze-dried gels was found more compacted, smooth and uniform due to the grafting process. Significant thermal stability was noticed due to the grafting reaction of G-GMA/TDM throughout the TGA results.

CONCLUSIONS

G-GMA/TDM composite hydrogel formed by the riboflavin/glycine photoinitiating system is a potential bioactive and biocompatible system for in-situ crosslinking the activated-light pulp capping agent for dentin regeneration.

Natural Materials for 3D Printing and Their Applications

In recent years, 3D printing has gradually become a well-known new topic and a research hotspot. At the same time, the advent of 3D printing is inseparable from the preparation of bio-ink. Natural materials have the advantages of low toxicity or even non-toxicity, there being abundant raw materials, easy processing and modification, excellent mechanical properties, good biocompatibility, and high cell activity, making them very suitable for the preparation of bio-ink. With the help of 3D printing technology, the prepared materials and scaffolds can be widely used in tissue engineering and other fields. Firstly, we introduce the natural materials and their properties for 3D printing and summarize the physical and chemical properties of these natural materials and their applications in tissue engineering after modification. Secondly, we discuss the modification methods used for 3D printing materials, including physical, chemical, and protein self-assembly methods. We also discuss the method of 3D printing. Then, we summarize the application of natural materials for 3D printing in tissue engineering, skin tissue, cartilage tissue, bone tissue, and vascular tissue. Finally, we also express some views on the research and application of these natural materials.

DOE-based synthesis of gellan gum-acrylic acid-based biodegradable hydrogels: screening of significant process variables and in situ field studies

The current study uses the free radical graft copolymerization of acrylic acid as a monomer, N,N-methylene-bis-(acrylamide) as a crosslinker and ammonium persulfate as an initiator to synthesise GG-cl-poly(AA) hydrogels based on gellan gum utilising response surface methodology (RSM). A full factorial design was used to obtain the greatest percent swelling (P_s), and key process variables were determined using the Pareto chart. To make the procedure cost-effective, a multiple regression model employing ANOVA projected a linear model with a maximum percentage swelling of 556 at the lowest concentration of all three studied factors. As a result, the sequential experimental design was successful in obtaining two-fold increases in the percentage swelling in a systematic way. An RSM-based central composite design was used to optimize the percentage swelling of the three most important synthesis parameters: initiator concentration, monomer concentration, and crosslinker concentration. The best process conditions are 7.3 mM L⁻¹ initiator, 44 μM L⁻¹ monomer, and 21.6 mM L⁻¹ crosslinker. The effective synthesis of GG-cl-poly(AA) was validated by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction, field emission scanning electron microscopy (FE-SEM), and ¹H-nuclear magnetic resonance. The swelling behavior of GG-cl-poly(AA) in water and saline solutions, as well as its water retention capability, was investigated. In comparison to distilled water, the swelling potential of optimized hydrogel was shown to be significantly reduced in saline solutions. The addition of GG-cl-poly(AA) significantly improved the moisture properties of plant growth media (clay, sandy, and clay–soil combination), implying that it has great potential in moisture stress agriculture. GG-cl-poly(AA) biodegradation was studied by soil burial and vermicomposting methods. The composting approach showed 89.95% deterioration after 22 days, while the soil burial method showed 86.71% degradation after 22 days. The synthesized hydrogel may be beneficial for agricultural applications because of its considerable degradation behaviour, strong water retention capacity, low cost, and environmental friendliness.

We use free radical graft copolymerization of acrylic acid as a monomer, N,N-methylene-bis-(acrylamide) as a crosslinker and ammonium persulfate as an initiator to synthesise GG-cl-poly(AA) hydrogels based on gellan gum utilising response surface methodology.

Guar (Cyamopsis tetragonoloba L.) plant gum: From biological applications to advanced nanomedicine

Natural polymers are an efficient class of eco-friendly and biodegradable polymers, because they are readily available, come from natural sources, inexpensive and can be chemically modified with the correct reagents. Guar gum (GG) is a natural polymer with great potential to be used in pharmaceutical formulations due to its unique composition and lack of toxicity. GG can be designed to suit the needs of the biological and medical engineering sectors. In the development of innovative drug delivery systems, GG is commonly utilized as a rate-controlling excipient. In this review, different properties of GG including chemical composition, extraction methods and its usefulness in diabetes, cholesterol lowering, weight control, tablet formulations as well as its food application were discussed. The other purpose of this study is to evaluate potential use of GG and its derivatives for advanced nanomedicine such as drug delivery, tissue engineering and nanosensing. It should be noted that some applicable patents in medical area have also been included in the rest of this survey to extend knowledge about guar gum and its polymeric nature.

Facile fabrication of Luffa cylindrica-assisted 3D hydroxyapatite scaffolds

The incidence of bone-related disorders is abruptly increasing worldwide, and the current therapies available are not sufficient to fulfill the growing demands of patients. Porous three-dimensional (3D) structures cast in combination with ceramics and polymers, with an intention to mimic native bone tissues, are gaining importance because of their better physicochemical and biological activities. The purpose of this study is to prepare a porous scaffold using Luffa cylindrica (LC) as a template coated with hydroxyapatite and gelatin. Guar gum (GG) was used as a binder, and hydroxyapatite powder was added to slurry of 10% gelatin and 1% GG in which pieces of LC were dipped followed by sintering at 900°C. The fabricated scaffolds (LC-GG) were analyzed by using different characterization techniques along with evaluation of porosity and water retention ability. The results revealed that the as-formed scaffolds have 70% porosity with more than 90% water retention ability. The degree of spreading of lymphocytes over the scaffold surface was less in comparison with that of the control, which showed the immunocompatibility of the fabricated scaffold. Based on the aforementioned findings, it is assumed that the synthesized porous structures can suitably be used for biomedical applications.

Integrating biomaterials and food biopolymers for cultured meat production

Cultured meat has recently achieved mainstream prominence due to the emergence of societal and industrial interest. In contrast to animal-based production of traditional meat, the cultured meat approach entails laboratory cultivation of engineered muscle tissue. However, bioengineers have hitherto engineered tissues to fulfil biomedical endpoints, and have had limited experience in engineering muscle tissue for its post-mortem traits, which broadly govern consumer definitions of meat quality. Furthermore, existing tissue engineering approaches face fundamental challenges in technical feasibility and industrial scalability for cultured meat production. This review discusses how animal-based meat production variables influence meat properties at both the molecular and functional level, and whether current cultured meat approaches recapitulate these properties. In addition, this review considers how conventional meat producers employ exogenous biopolymer-based meat ingredients and processing techniques to mimic desirable meat properties in meat products. Finally, current biomaterial strategies for engineering muscle and adipose tissue are surveyed in the context of emerging constraints that pertain to cultured meat production, such as edibility, sustainability and scalability, and potential areas for integrating biomaterials and food biopolymer approaches to address these constraints are discussed. STATEMENT OF SIGNIFICANCE: Laboratory-grown or cultured meat has gained increasing interest from industry and the public, but currently faces significant impediment to market feasibility. This is due to fundamental knowledge gaps in producing realistic meat tissues via conventional tissue engineering approaches, as well as translational challenges in scaling up these approaches in an efficient, sustainable and high-volume manner. By defining the molecular basis for desirable meat quality attributes, such as taste and texture, and introducing the fundamental roles of food biopolymers in mimicking these properties in conventional meat products, this review aims to bridge the historically disparate fields of meat science and biomaterials engineering in order to inspire potentially synergistic strategies that address some of these challenges.

Photopolymerized Porous Hydrogels

Hydrogels are polymeric networks highly swollen with water. Because of their versatility and properties mimicking biological tissues, they are very interesting for biomedical applications. In this aim, the control of porosity is of crucial importance since it governs the transport properties and influences the fate of cells cultured onto or into the hydrogels. Among the techniques allowing for the elaboration of hydrogels, photopolymerization or photo-cross-linking are probably the most powerful and versatile synthetic routes. This Review aims at giving an overview of the literature dealing with photopolymerized hydrogels for which the generation or characterization of porosity is studied. First, the materials (polymers and photoinitiating systems) used for synthesizing hydrogels are presented. The different ways for generating porosity in the photopolymerized hydrogels are explained, and the characterization techniques allowing adequate study of the porosity are presented. Finally, some applications in the field of controlled release and tissue engineering are reviewed.

3D Antidrying Antifreezing Artificial Skin Device with Self-Healing and Touch Sensing Capability

Hydrogels are attractive, active materials for various e-skin devices based on their unique functionalities such as flexibility and biocompatibility. Still, e-skin devices are generally limited to simple structures, and the realization of optimal-shaped 3D e-skin devices for target applications is an intriguing issue of interest. Furthermore, hydrogels intrinsically suffer from drying and freezing issues in operational capability for practical applications. Herein, 3D artificial skin devices are demonstrated with highly improved device stability. The devices are fabricated in a target-oriented 3D structure by extrusion-based 3D printing, spontaneously heal mechanical damage, and enable stable device operation over time and under freezing conditions. Based on the material design to improve drying and freezing resistance, an organohydrogel, prepared by solvent displacement of hydrogel with ethylene glycol for 3 h, exhibits excellent drying resistance over 1000 h and improved freezing resistance by showing no phase transition down to -60 °C while maintaining its self-healing functionality. Based on the improved drying and freezing resistance, artificial skin devices in target-oriented optimal 3D structures are presented, which enable accurate positioning of touchpoints even on a complicated 3D structure stably over time and excellent operation at temperatures below 0 °C without losing their flexibility.

Newer guar gum ester/chicken feather keratin interact films for tissue engineering

This work intends to synthesis newer guar gum indole acetate ester and design film scaffolds based on protein-polysaccharide interactions for tissue engineering applications. Guar gum indole acetate(GGIA) was synthesized for the first time from guar gum in presence of aprotic solvent activated hofmeister ions. The newer biopolymer was fully characterized in FT-IR,¹³C NMR, XRD and TGA analysis. High DS (Degree of Substitution, DS = 0.61) GGIA was cross-linked with hydrolyzed keratin, extracted from chicken feather wastes. Films were synthesized from different biopolymer ratios and the surface chemistry appeared interesting. Physicochemical properties for GGIA-keratin association were notable. Fully bio-based films were non-cytotoxic and exhibited excellent biocompatibility for human dermal fibroblast cell cultivations. The film scaffold showed 63% porosity and the recorded tensile strength at break was 6.4 MPa. Furthermore, the standardised film exerted superior antimicrobial activity against both the Gram-positive and Gram-negative bacteria. MICs were recorded at 130 μg/mL and 212 μg/mL for E. coli and S. aureus respectively. In summary, GGIA-keratin film scaffolds represented promising platforms for skin tissue engineering applications.

Recent Advances in Natural Gum-Based Biomaterials for Tissue Engineering and Regenerative Medicine: A Review

The engineering of tissues under a three-dimensional (3D) microenvironment is a great challenge and needs a suitable supporting biomaterial-based scaffold that may facilitate cell attachment, spreading, proliferation, migration, and differentiation for proper tissue regeneration or organ reconstruction. Polysaccharides as natural polymers promise great potential in the preparation of a three-dimensional artificial extracellular matrix (ECM) (i.e., hydrogel) via various processing methods and conditions. Natural polymers, especially gums, based upon hydrogel systems, provide similarities largely with the native ECM and excellent biological response. Here, we review the origin and physico-chemical characteristics of potentially used natural gums. In addition, various forms of scaffolds (e.g., nanofibrous, 3D printed-constructs) based on gums and their efficacy in 3D cell culture and various tissue regenerations such as bone, osteoarthritis and cartilage, skin/wound, retinal, neural, and other tissues are discussed. Finally, the advantages and limitations of natural gums are precisely described for future perspectives in tissue engineering and regenerative medicine in the concluding remarks.

Atorvastatin lipid nanocapsules and gold nanoparticles embedded in injectable thermo-gelling hydrogel scaffold containing adipose tissue extracellular matrix for myocardial tissue regeneration

This study aimed to prepare, optimise, and characterise the novel hybrid hydrogel scaffold containing atorvastatin lipid nanocapsules (LNCs) and gold nanoparticles (NPs) to improve cardiomyoblasts proliferation and regeneration of myocardium. A thermo-responsive aminated guaran (AGG) hydrogel was prepared to encompass extracellular matrix (ECM) fetched from human adipose tissue. Emulsion phase-inversion technique was used to obtain LNCs. Biocompatibility, tensile strength, conductivity, and proliferation of human myocardial cells of the optimised formulation were studied. The LNCs have a spherical shape, and the optimised formulation showed a mean particle size of 18.79 nm, the zeta potential of - 11.4 mV, drug loading of 99.99%, and release efficiency percent over 72 h was 18.73%. The injectable thermo-sensitive hydrogel prepared using 1 w/v% of AGG, 35 w/w% of ECM, ∼0.5 mg/ml of gold NPs and atorvastatin loaded LNCs showed the best physical characteristics. The hybrid scaffold loaded with atorvastatin and gold NPs improved the proliferation of cardiomyoblasts more than sevenfold with enhanced cell attachment to the scaffold. The tensile strength and the conductivity of the scaffold were 300 kPa and 0.14 S/m, respectively. Injectable hybrid adipose tissue prepared by ECM and AGG hydrogel loaded with atorvastatin and gold NPs showed promising physical characteristics for myocardial tissue engineering.

Antimicrobial Activity of Hybrids Terpolymers Based on Magnetite Hydrogel Nanocomposites

In the past few years, the development of hydrogel properties has led to the emergence of nanocomposite hydrogels that have unique properties that allow them to be used in various different fields and applications such as drug delivery, adsorption soil containing, tissue engineering, wound dressing, and especially antimicrobial applications. Thus, this study was conducted in order to fabricate a novel crosslinked terpolymer nanocomposite hydrogel using the free radical copolymerization method based on the usage of 2-acrylamido-2-methylpropane sulfonic acid (AMPS), acrylamide (AAm), acrylonitrile (AN), and acrylic acid (AA) monomers and iron oxide (Fe3O4) magnetic nanoparticles and using benzoyl peroxide as an initiator and ethylene glycol dimethacrylate (EGDMA) as a crosslinker. The structure of the synthesized composite was confirmed using Fourier transform infrared (FTIR) spectroscopy and x-ray powder diffraction (XRD) measurements. Furthermore, the surface morphology and the magnetic nanoparticle distributions were determined by scanning electron microscopy (SEM) measurement. In addition, the swelling capacity of the hydrogel nanocomposite was measured using the swelling test. Lastly, the efficiency of the produced composite was evaluated as an antimicrobial agent for Gram-positive and Gram-negative bacterial strains and a fungal strain.

Injectable Nanocomposite Hydrogels and Electrosprayed Nano(Micro)Particles for Biomedical Applications

Polymeric scaffolds have played important roles in biomedical applications due to their potentially practical performance such as delivery of bioactive components and/or regenerative cells. These materials were well-designed to encapsulate bioactive molecules or/and nanoparticles for enhancing their performance in tissue regeneration and drug delivery systems. In the study, several multifunctional nanocomposite hydrogel and polymeric nano(micro)particles-electrosprayed platforms were described from their fabrication methods and structural characterizations to potential applications in the mentioned fields. Regarding to their described performance, these multifunctional nanocomposite biomaterials could pay many ways for further studies that enables them apply in clinical applications.

Improvement of anti-washout property of calcium phosphate cement by addition of konjac glucomannan and guar gum

The inferior anti-washout property of injectable calcium phosphate cement (CPC) limits its wider application in clinic. In this study, the improvement of anti-washout performance of CPC by addition of konjac glucomannan or guar gum, which was dissolved in the CPC liquid, was first studied. The influence of KGM/GG blend with different mass ratios on the anti-washout property, compressive strength and in vitro cytocompatibility of CPC was estimated. The results revealed that small amount of KGM or GG could obviously enhance the anti-washout property of CPC. Moreover, the washout resistance efficiency of KGM/GG blend was better than KGM or GG alone. The addition of KGM/GG blend slightly shortened the final setting time of CPC. Although the introduction of KGM/GG blend reduced the compressive strength of CPC, the compressive strength still reached or surpassed that of human cancellous bone. The best KGM/GG mass ratio was 5:5, which was most efficient at not only reducing CPC disintegration, but also increasing compressive strength. The addition of KGM/GG blend obviously promoted the cells proliferation on the CPC. In short, the CPC modified by KGM/GG blend exhibited excellent anti-washout property, appropriate setting time, adequate compressive strength, and good cytocompatibility, and has the potential to be used in bone defect repair. The addition of KGM/GG blend significantly improved the anti-washout property of CPC. The best KGM/GG mass ratio was 5:5, which was most efficient in reducing the CPC disintegration.

Bi-layered electrospun nanofibrous polyurethane-gelatin scaffold with targeted heparin release profiles for tissue engineering applications

Tissue engineering is a biotechnology that is used to develop biological substitutes to restore, maintain, or improve functions. Thus, the porous scaffolds are used to accommodate cells in tissue engineering. In this research, three dimensional (3D) bi-layered polyurethane (PU)-gelatin nanofibrous scaffolds were prepared by the electrospinning method, after which the capability of the released heparin as an anti-coagulation factor was evaluated. Electrospinning has been extensively investigated for the preparation of fibers that exhibit a high surface area to volume ratio. Results showed that scanning electron microscopy (SEM) micrographs exhibited a smooth surface as well as a highly porous and bead-free structure, in which fibers were distributed in the range of 100–600 nm. The modulus and ultimate tensile strength (UTS) decreased and increased, respectively, after crosslinking the reaction of polymers. This process also reduced swelling ratio, the hydrolytic biodegradation rate, and the release rate as a function of time. Moreover, an in vitro assay demonstrated that 3D nanofibrous scaffolds supported L929 fibroblast cell viability and that cells adhered and spread on the fibers. Based on the obtained results, the heparin-loaded electrospinning nanofibrous scaffolds have initial physicochemical and mechanical properties to protect neo-tissue formation.

Synthesis, characterization, and anti-microbial activity of superabsorbents based on agar–poly(methacrylic acid-glycine)

In this study, poly(methacrylic acid-glycine)-grafted agar-based hydrogels with optimized process parameters were synthesized via a two-step green-radiation induced grafting process using microwave heating. Poly(methacrylic acid) chains were graft copolymerized onto an agar backbone using ammonium persulfate as a free radical initiator and N,N′-methylene-bis-acrylamide as a cross-linking means using microwave heating. The influence of different reaction parameters was investigated on the percentage swelling behavior of the cross-linked hydrogel networks. The prepared hydrogel networks with optimum percentage swelling were characterized by Fourier transform infrared spectroscopy, time-of-flight secondary ion mass spectrometry, scanning electron microscopy, X-ray diffraction, and thermogravimetric analysis, using agar as a reference. The anti-bacterial activities of the prepared hydrogels against Gram-positive Staphylococcus aureus bacteria and Gram-negative Escherichia coli bacteria were investigated. Staphylococcus aureus was found to be more susceptible to the compounds compared to Escherichia coli. These results indicate that the prepared hydrogels have the potential to be applied as anti-bacterial agents.

Neuronal Differentiation of Induced Pluripotent Stem Cells on Surfactant Templated Chitosan Hydrogels

The development of effective tissue engineering materials requires careful consideration of several properties beyond biocompatibility, including permeability and mechanical stiffness. While surfactant templating has been used for over a decade to control the physical properties of photopolymer materials, the potential benefit of this technique with regard to biomaterials has yet to be fully explored. Herein we demonstrate that surfactant templating can be used to tune the water uptake and compressive modulus of photo-cross-linked chitosan hydrogels. Interestingly, templating with quaternary ammonium surfactants also hedges against property fluctuations that occur with changing pH. Further, we demonstrate that, after adequate surfactant removal, these materials are nontoxic, support the attachment of induced pluripotent stem cells and facilitate stem cell differentiation to neuronal phenotypes. These results demonstrate the utility of surfactant templating for optimizing the properties of biomaterials intended for a variety of applications, including retinal regeneration.

Rapid formation of regulated methacrylate networks yielding tough materials for lithography-based 3D printing

Vinyl sulfone esters are described as a new class of AFCT reagents for methacrylate-based photopolymerization without the drawback of retardation but good regulation of network architecture. Resulting materials show low shrinkage stress and increased toughness. This paves the way for vinyl sulfone esters in lithography-based 3D printing.

Composition and characterization of in situ usable light cured dental drug delivery hydrogel system

Biodegradable polymers are compatible, permeable and nontoxic, thus they can provide a useful tool for drug delivery or tissue engineering. These polymers can form hydrogels, which are suitable vehicles for different types of materials e.g. drugs, bioactive molecules or cells. In the case of dentistry, photopolymerization is an obvious method to obtain in situ useable devices which can provide a more efficient way of tailoring drug release. A hydrogel system was developed based on poly-gamma-glutamic acid that was modified with methacryloyl groups to achieve this purpose. The resulting new reactive structure was proved by NMR spectroscopy. The swelling ratio of this type of hydrogel has been found remarkable, over 300 % after 24 h, and it can release 5 ng/mm(2) metronidazole. The prepared hydrogels were nontoxic as viability, cytotoxicity tests and cell morphology investigations proved it. These results render this model system an excellent candidate for use as an in situ curing local drug delivery device. The new photoactive system can be utilized in the treatment of periodontal diseases or raising the effectiveness of drugs used only in the minimal effective dose.