Improved cellularization and angiogenesis using collagen scaffolds chemically conjugated with vascular endothelial growth factor

The potential bone regeneration effects of leptin- and osteolectin-coated 3D-printed PCL scaffolds: anin vivostudy

This study investigated the effectiveness of bone regeneration upon the application of leptin and osteolectin to a three-dimensional (3D) printed poly(ϵ-caprolactone) (PCL) scaffold. A fused deposition modeling 3D bioprinter was used to fabricate scaffolds with a diameter of 4.5 mm, a height of 0.5 mm, and a pore size of 420-520 nm using PCL (molecular weight: 43 000). After amination of the scaffold surface for leptin and osteolectin adhesion, the experimental groups were divided into the PCL scaffold (control), the aminated PCL (PCL/Amine) scaffold, the leptin-coated PCL (PCL/Leptin) scaffold, and the osteolectin-coated PCL (PCL/Osteo) scaffold. Next, the water-soluble tetrazolium salt-1 (WST-1) assay was used to assess cell viability. All groups exhibited cell viability rates of >100%. Female 7-week-old Sprague-Dawley rats were used forin vivoexperiments. Calvarial defects were introduced on the rats' skulls using a 5.5 mm trephine bur. The rats were divided into the PCL (control), PCL/Leptin, and PCL/Osteo scaffold groups. The scaffolds were then inserted into the calvarial defect areas, and the rats were sacrificed after 8-weeks to analyze the defect area. Micro-CT analysis indicated that the leptin- and osteolectin-coated scaffolds exhibited significantly higher bone regeneration. Histological analysis revealed new bone and blood vessels in the calvarial defect area. These findings indicate that the 3D-printed PCL scaffold allows for patient-customized fabrication as well as the easy application of proteins like leptin and osteolectin. Moreover, leptin and osteolectin did not show cytotoxicity and exhibited higher bone regeneration potential than the existing scaffold.

A leptin-loaded poly-ϵ-caprolactone 3D printing scaffold for odontoblastic differentiation in human dental pulp cells

This study investigated the effects on odontoblast differentiation of a 3D-printed poly-ϵ-caprolactone (PCL) scaffold that incorporated leptin. Material extrusion-type 3D printing with a 43 000-molecular weight PCL material was used to fabricate a PCL scaffold with a 6 mm diameter, 1 mm height, and 270-340 µm pore size. The experimental groups were PCL scaffolds (control group), PCL scaffolds with aminated surfaces (group A), and PCL scaffolds with leptin on the aminated surface (group L). The aminated surface was treated with 1,6-hexanediamine and verified by ninhydrin analysis. Leptin loading was performed using Traut's reagent and 4-(N-Maleimidomethyl)cyclohexane-1-carboxylic acid 3-sulfo-N-hydroxysuccinimide ester sodium salt (Sulfo-SMCC). Groups A and L showed significantly higher surface wettability, pulp cell adhesion, and proliferation than the control group. Group L exhibited increased alkaline phosphatase, calcification deposits, and mRNA and protein expression of dentin sialophosphoprotein and dentin matrix acidic phosphoprotein 1 compared with the control group. In this study, a 3D-printed PCL scaffold containing leptin was enhanced odontoblast differentiation and dental pulp cells adhesion and proliferation.

Strategies for overcoming protein and peptide instability in biodegradable drug delivery systems

The global pharmaceutical market has recently shifted its focus from small molecule drugs to peptide, protein, and nucleic acid drugs, which now comprise a majority of the top-selling pharmaceutical products on the market. Although these biologics often offer improved drug specificity, new mechanisms of action, and/or enhanced efficacy, they also present new challenges, including an increased potential for degradation and a need for frequent administration via more invasive administration routes, which can limit patient access, patient adherence, and ultimately the clinical impact of these drugs. Controlled-release systems have the potential to mitigate these challenges by offering superior control over in vivo drug levels, localizing these drugs to tissues of interest (e.g., tumors), and reducing administration frequency. Unfortunately, adapting controlled-release devices to release biologics has proven difficult due to the poor stability of biologics. In this review, we summarize the current state of controlled-release peptides and proteins, discuss existing techniques used to stabilize these drugs through encapsulation, storage, and in vivo release, and provide perspective on the most promising opportunities for the clinical translation of controlled-release peptides and proteins.

Therapeutic role of growth factors in treating diabetic wound

Wounds in diabetic patients, especially diabetic foot ulcers, are more difficult to heal compared with normal wounds and can easily deteriorate, leading to amputation. Common treatments cannot heal diabetic wounds or control their many complications. Growth factors are found to play important roles in regulating complex diabetic wound healing. Different growth factors such as transforming growth factor beta 1, insulin-like growth factor, and vascular endothelial growth factor play different roles in diabetic wound healing. This implies that a therapeutic modality modulating different growth factors to suit wound healing can significantly improve the treatment of diabetic wounds. Further, some current treatments have been shown to promote the healing of diabetic wounds by modulating specific growth factors. The purpose of this study was to discuss the role played by each growth factor in therapeutic approaches so as to stimulate further therapeutic thinking.

Enzymatically Crosslinked Collagen as a Versatile Matrix for In Vitro and In Vivo Co-Engineering of Blood and Lymphatic Vasculature

Adequate vascularization is required for the successful translation of many in vitro engineered tissues. This study presents a novel collagen derivative that harbors multiple recognition peptides for orthogonal enzymatic crosslinking based on sortase A (SrtA) and Factor XIII (FXIII). SrtA-mediated crosslinking enables the rapid co-engineering of human blood and lymphatic microcapillaries and mesoscale capillaries in bulk hydrogels. Whereas tuning of gel stiffness determines the extent of neovascularization, the relative number of blood and lymphatic capillaries recapitulates the ratio of blood and lymphatic endothelial cells originally seeded into the hydrogel. Bioengineered capillaries readily form luminal structures and exhibit typical maturation markers both in vitro and in vivo. The secondary crosslinking enzyme Factor XIII is used for in situ tethering of the VEGF mimetic QK peptide to collagen. This approach supports the formation of blood and lymphatic capillaries in the absence of exogenous VEGF. Orthogonal enzymatic crosslinking is further used to bioengineer hydrogels with spatially defined polymer compositions with pro- and anti-angiogenic properties. Finally, macroporous scaffolds based on secondary crosslinking of microgels enable vascularization independent from supporting fibroblasts. Overall, this work demonstrates for the first time the co-engineering of mature micro- and meso-sized blood and lymphatic capillaries using a highly versatile collagen derivative.

Optimizing the combined soft tissue repair and osteogenesis using double surfaces of crosslinked collagen scaffolds

Excessive tissue damage or loss has been solved by guided tissue regeneration and guided bone regeneration theories. However, the unfavorable degradation property of the resorbable collagen scaffold brings a big challenge to support soft tissue stabilization and time-consuming osteogenesis. The combined effect for soft tissue and bone of the collagen scaffold with better degradation pattern has not been clearly proven. This study determined whether the double surfaces of crosslinked collagen scaffolds could optimize the combined soft tissue repair and osteogenesis. In this study, we applied the chemically crosslinking treatment to the commercially available collagen scaffolds. Surface characterization, mechanical property and cell proliferation in vitro were evaluated. Combined bilateral skin and bone defects were established with the smooth surface of scaffold facing the skin defect and the rough surface facing the bone defect on the calvaria of rat. Micro-CT and histological evaluation were applied to determine the scaffold degradation pattern, soft tissue repair and osteogenesis. The crosslinked collagen scaffolds showed comparably favorable surface porosity, structure intactness, superhydrophilicity and mechanical properties. Compared to the native scaffolds, the crosslinked scaffolds could optimize the combined soft tissue repair and osteogenesis by preferably prolonged degradation time. Early pro-angiogenesis facilitated soft tissue repair and osteogenesis by upregulated soft tissue matrix degradation and balanced pro-osteogenesis with limited osteoclast-mediated bone resorption. Taken together, this study offers a promising repair strategy for the combined soft tissue and bone defects. Further, the possible mechanism of controllable scaffold degradation should be conducted.

Development of a photosynthetic hydrogel as potential wound dressing for the local delivery of oxygen and bioactive molecules

The development of biomaterials to improve wound healing is a critical clinical challenge and an active field of research. As it is well described that oxygen plays a critical role in almost each step of the wound healing process, in this work, an oxygen producing photosynthetic biomaterial was generated, characterized, and further modified to additionally release other bioactive molecules. Here, alginate hydrogels were loaded with the photosynthetic microalgae Chlamydomonas reinhardtii, showing high integration as well as immediate oxygen release upon illumination. Moreover, the photosynthetic hydrogel showed high biocompatibility in vitro and in vivo, and the capacity to sustain the metabolic oxygen requirements of zebrafish larvae and skin explants. In addition, the photosynthetic dressings were evaluated in 20 healthy human volunteers following the ISO-10993-10-2010 showing no skin irritation, mechanical stability of the dressings, and survival of the photosynthetic microalgae. Finally, hydrogels were also loaded with genetically engineered microalgae to release human VEGF, or pre-loaded with antibiotics, showing sustained release of both bioactive molecules. Overall, this work shows that photosynthetic hydrogels represent a feasible approach for the local delivery of oxygen and other bioactive molecules to promote wound healing. STATEMENT OF SIGNIFICANCE: As oxygen plays a key role in almost every step of the tissue regeneration process, the development of oxygen delivering therapies represents an active field of research, where photosynthetic biomaterials have risen as a promising approach for wound healing. Therefore, in this work a photosynthetic alginate hydrogel-based wound dressing containing C. reinhardtii microalgae was developed and validated in healthy skin of human volunteers. Moreover, hydrogels were modified to additionally release other bioactive molecules such as recombinant VEGF or antibiotics. The present study provides key scientific data to support the use of photosynthetic hydrogels as customizable dressings to promote wound healing.

Smart biomaterials and their potential applications in tissue engineering

Smart biomaterials have been rapidly advancing ever since the concept of tissue engineering was proposed. Interacting with human cells, smart biomaterials can play a key role in novel tissue morphogenesis. Various aspects of biomaterials utilized in or being sought for the goal of encouraging bone regeneration, skin graft engineering, and nerve conduits are discussed in this review. Beginning with bone, this study summarizes all the available bioceramics and materials along with their properties used singly or in conjunction with each other to create scaffolds for bone tissue engineering. A quick overview of the skin-based nanocomposite biomaterials possessing antibacterial properties for wound healing is outlined along with skin regeneration therapies using infrared radiation, electrospinning, and piezoelectricity, which aid in wound healing. Furthermore, a brief overview of bioengineered artificial skin grafts made of various natural and synthetic polymers has been presented. Finally, by examining the interactions between natural and synthetic-based biomaterials and the biological environment, their strengths and drawbacks for constructing peripheral nerve conduits are highlighted. The description of the preclinical outcome of nerve regeneration in injury healed with various natural-based conduits receives special attention. The organic and synthetic worlds collide at the interface of nanomaterials and biological systems, producing a new scientific field including nanomaterial design for tissue engineering.

The immune microenvironment and tissue engineering strategies for spinal cord regeneration

Regeneration of neural tissue is limited following spinal cord injury (SCI). Successful regeneration of injured nerves requires the intrinsic regenerative capability of the neurons and a suitable microenvironment. However, the local microenvironment is damaged, including insufficient intraneural vascularization, prolonged immune responses, overactive immune responses, dysregulated bioenergetic metabolism and terminated bioelectrical conduction. Among them, the immune microenvironment formed by immune cells and cytokines plays a dual role in inflammation and regeneration. Few studies have focused on the role of the immune microenvironment in spinal cord regeneration. Here, we summarize those findings involving various immune cells (neutrophils, monocytes, microglia and T lymphocytes) after SCI. The pathological changes that occur in the local microenvironment and the function of immune cells are described. We also summarize and discuss the current strategies for treating SCI with tissue-engineered biomaterials from the perspective of the immune microenvironment.

Cell-Seeded Biomaterial Scaffolds: The Urgent Need for Unanswered Accelerated Angiogenesis

One of the most arduous challenges in tissue engineering is neovascularization, without which there is a lack of nutrients delivered to a target tissue. Angiogenesis should be completed at an optimal density and within an appropriate period of time to prevent cell necrosis. Failure to meet this challenge brings about poor functionality for the tissue in comparison with the native tissue, extensively reducing cell viability. Prior studies devoted to angiogenesis have provided researchers with some biomaterial scaffolds and cell choices for angiogenesis. For example, while most current angiogenesis approaches require a variety of stimulatory factors ranging from biomechanical to biomolecular to cellular, some other promising stimulatory factors have been underdeveloped (such as electrical, topographical, and magnetic). When it comes to choosing biomaterial scaffolds in tissue engineering for angiogenesis, key traits rush to mind including biocompatibility, appropriate physical and mechanical properties (adhesion strength, shear stress, and malleability), as well as identifying the appropriate biomaterial in terms of stability and degradation profile, all of which may leave essential trace materials behind adversely influencing angiogenesis. Nevertheless, the selection of the best biomaterial and cells still remains an area of hot dispute as such previous studies have not sufficiently classified, integrated, or compared approaches. To address the aforementioned need, this review article summarizes a variety of natural and synthetic scaffolds including hydrogels that support angiogenesis. Furthermore, we review a variety of cell sources utilized for cell seeding and influential factors used for angiogenesis with a concentrated focus on biomechanical factors, with unique stimulatory factors. Lastly, we provide a bottom-to-up overview of angiogenic biomaterials and cell selection, highlighting parameters that need to be addressed in future studies.

Advancements in the Delivery of Growth Factors and Cytokines for the Treatment of Cutaneous Wound Indications

Significance: Wound healing involves the phasic production of growth factors (GFs) and cytokines to progress an acute wound to a resolved scar. Dysregulation of these proteins contributes to both wound chronicity and excessive scarring. Direct supplementation of GFs and cytokines for treatment of healing and scarring complications has, however, been disappointing. Failings likely relate to an inability to deliver recombinant proteins at physiologically relevant levels to an environment conducive to healing. Recent Advances: Inspired by the extracellular matrix, natural biomaterials have been developed that resemble human skin, and are capable of delivering bioactives. Hybrid biomaterials made using multiple polymers, fabrication methods, and proteins are proving efficacious in animal models of acute and impaired wound healing. Critical Issues: For clinical translation, these delivery systems must be tailored for specific wound indications and the correct phase of healing. GFs and cytokines must be delivered in a controlled manner that will target specific healing or scarring impairments. Preclinical assessment in clinically relevant animal models of impaired or excessive healing is critical. Future Directions: Clinical success will likely depend on the GF or cytokine selected, their compatibility with the chosen biomaterial(s), degradation rate of the fabricated system, and the degree of control over release kinetics. Further testing is essential to assess which wound indications are most suited to specific delivery systems and to prove whether they provide superior efficacy over direct protein therapies.

3D bioprinting and microscale organization of vascularized tissue constructs using collagen-based bioink

Bioprinting three-dimensional (3D) tissue equivalents have progressed tremendously over the last decade. 3D bioprinting is currently being employed to develop larger and more physiologic tissues, and it is of particular interest to generate vasculature in biofabricated tissues to aid better perfusion and transport of nutrition. Having an advantage over manual culture systems by bringing together biological scaffold materials and cells in precise 3D spatial orientation, bioprinting could assist in placing endothelial cells in specific spatial locations within a 3D matrix to promote vessel formation at these predefined areas. Hence, in the present study, we investigated the use of bioprinting to generate tissue-level capillary-like networks in biofabricated tissue constructs. First, we developed a bioink using collagen type-1 supplemented with xanthan gum (XG) as a thickening agent. Using a commercial extrusion-based multi-head bioprinter and collagen-XG bioink, the component cells were spatially assembled, wherein the endothelial cells were bioprinted in a lattice pattern and sandwiched between bioprinted fibroblasts layers. 3D bioprinted constructs thus generated were stable, and maintained structural shape and form. Post-print culture of the bioprinted tissues resulted in endothelial sprouting and formation of interconnected capillary-like networks within the lattice pattern and between the fibroblast layers. Bioprinter-assisted spatial placement of endothelial cells resulted in fabrication of patterned prevascularized constructs that enable potential regenerative applications in the future.

Investigating the vascularization capacity of a decellularized dental pulp matrix seeded with human dental pulp stem cells: in vitro and preliminary in vivo evaluations

AIM

To investigate the vascularization capacity of a decellularized dental pulp matrix (DDP) of bovine origin seeded with human dental pulp stem cells (hDPSCs) in vitro and to present preliminary in vivo findings.

METHODOLOGY

Bovine dental pulps were decellularized and then analysed using histological staining and DNA quantification. The resultant DDPs were characterized using immunohistochemical staining for the retention of vascular endothelial growth factor A (VEGF-A) and fibroblast growth factor 2 (FGF-2). Furthermore, DDPs were recellularized with hDPSCs and analysed histologically. The expression of markers involved in angiogenesis by hDPSCs colonizing the DDPs was assessed in vitro. A preliminary in vivo study was then conducted in which hDPSCs-seeded and unseeded DDPs were inserted in debrided human premolars root slices and implanted subcutaneously in immunodeficient mice. Samples were retrieved after 30 days and analysed using histological and immunohistochemical staining. The independent samples t-test, analysis of variance and a Kruskal-Wallis test were used to analyse the quantitative data statistically depending on the group numbers and normality of data distribution. The difference between the groups was considered significant when the P-value was less than 0.05.

RESULTS

Acellular dental pulp matrices were generated following bovine dental pulp decellularization. Evaluation of the developed DDPs revealed a significant DNA reduction (P < 0.0001) with preservation of the native histoarchitecture and vasculature and retention of VEGF-A and FGF-2. Upon recellularization of the DDPs with hDPSCs, the in vitro analyses revealed cell engraftment with progressive repopulation of DDPs' matrices and vasculature and with enhanced expression of markers involved in angiogenesis. In vivo implantation of root slices with hDPSCs-seeded DDPs revealed apparent vascularization enhancement as compared to the unseeded DDP group (P < 0.0001).

CONCLUSIONS

The developed decellularized dental pulp matrix had pro-angiogenic properties characterized by the retention of native vasculature and angiogenic growth factors. Seeding of hDPSCs into the DDP led to progressive repopulation of the vasculature, enhanced expression of markers involved in angiogenesis in hDPSCs and improved in vivo vascularization capacity. The se suggest that a combination of DDP and hDPSCs have the potential to provide a promising vascularization promoting strategy for dental pulp regeneration.

Strategies for re-vascularization and promotion of angiogenesis in trauma and disease

The maintenance of a healthy vascular system is essential to ensure the proper function of all organs of the human body. While macrovessels have the main role of blood transportation from the heart to all tissues, microvessels, in particular capillaries, are responsible for maintaining tissues' functionality by providing oxygen, nutrients and waste exchanges. Occlusion of blood vessels due to atherosclerotic plaque accumulation remains the leading cause of mortality across the world. Autologous vein and artery grafts bypassing are the current gold standard surgical procedures to substitute primarily obstructed vascular structures. Ischemic scenarios that condition blood supply in downstream tissues may arise from blockage phenomena, as well as from other disease or events leading to trauma. The (i) great demand for new vascular substitutes, arising from both the limited availability of healthy autologous vessels, as well as the shortcomings associated with small-diameter synthetic vascular grafts, and (ii) the challenging induction of the formation of adequate and stable microvasculature are current driving forces for the growing interest in the development of bioinspired strategies to ensure the proper function of vasculature in all its dimensional scales. Here, a critical review of well-established technologies and recent biotechnological advances to substitute or regenerate the vascular system is provided.

Bioactive Glasses: A Promising Therapeutic Ion Release Strategy for Enhancing Wound Healing

The morbidity, mortality, and burden of burn victims and patients with severe diabetic wounds are still high, which leads to an extensively growing demand for novel treatments with high clinical efficacy. Biomaterial-based wound treatment approaches have progressed over time from simple cotton wool dressings to advanced skin substitutes containing cells and growth factors; however, no wound care approach is yet completely satisfying. Bioactive glasses are materials with potential in many areas that exhibit unique features in biomedical applications. Today, bioactive glasses are not only amorphous solid structures that can be used as a substitute in hard tissue but also are promising materials for soft tissue regeneration and wound healing applications. Biologically active elements such as Ag, B, Ca, Ce, Co, Cu, Ga, Mg, Se, Sr, and Zn can be incorporated in glass networks; hence, the superiority of these multifunctional materials over current materials results from their ability to release multiple therapeutic ions in the wound environment, which target different stages of the wound healing process. Bioactive glasses and their dissolution products have high potency for inducing angiogenesis and exerting several biological impacts on cell functions, which are involved in wound healing and some other features that are valuable in wound healing applications, namely hemostatic and antibacterial properties. In this review, we focus on skin structure, the dynamic process of wound healing in injured skin, and existing wound care approaches. The basic concepts of bioactive glasses are reviewed to better understand the relationship between glass structure and its properties. We illustrate the active role of bioactive glasses in wound repair and regeneration. Finally, research studies that have used bioactive glasses in wound healing applications are summarized and the future trends in this field are elaborated.

Nanostructured Biomaterials for Bone Regeneration

This review article addresses the various aspects of nano-biomaterials used in or being pursued for the purpose of promoting bone regeneration. In the last decade, significant growth in the fields of polymer sciences, nanotechnology, and biotechnology has resulted in the development of new nano-biomaterials. These are extensively explored as drug delivery carriers and as implantable devices. At the interface of nanomaterials and biological systems, the organic and synthetic worlds have merged over the past two decades, forming a new scientific field incorporating nano-material design for biological applications. For this field to evolve, there is a need to understand the dynamic forces and molecular components that shape these interactions and influence function, while also considering safety. While there is still much to learn about the bio-physicochemical interactions at the interface, we are at a point where pockets of accumulated knowledge can provide a conceptual framework to guide further exploration and inform future product development. This review is intended as a resource for academics, scientists, and physicians working in the field of orthopedics and bone repair.

Immobilization of Growth Factors for Cell Therapy Manufacturing

Cell therapy products exhibit great therapeutic potential but come with a deterring price tag partly caused by their costly manufacturing processes. The development of strategies that lead to cost-effective cell production is key to expand the reach of cell therapies. Growth factors are critical culture media components required for the maintenance and differentiation of cells in culture and are widely employed in cell therapy manufacturing. However, they are expensive, and their common use in soluble form is often associated with decreased stability and bioactivity. Immobilization has emerged as a possible strategy to optimize growth factor use in cell culture. To date, several immobilization techniques have been reported for attaching growth factors onto a variety of biomaterials, but these have been focused on tissue engineering. This review briefly summarizes the current landscape of cell therapy manufacturing, before describing the types of chemistry that can be used to immobilize growth factors for cell culture. Emphasis is placed to identify strategies that could reduce growth factor usage and enhance bioactivity. Finally, we describe a case study for stem cell factor.

Encapsulation of collagen mimetic peptide-tethered vancomycin liposomes in collagen-based scaffolds for infection control in wounds

Wound infections are a significant clinical problem affecting millions of people worldwide. Topically applied antibacterial formulations with longer residence time and controlled antimicrobial release would offer significant benefits for improved prevention and treatment of infected wounds. In this study, we developed collagen mimetic peptide (CMP) tethered vancomycin (Van)-containing liposomes (Lipo) (CMP-Van-Lipo) hybridized to collagen-based hydrogels ('co-gels,' e.g., collagen/fibrin combination hydrogels) for the treatment of methicillin-resistant Staphylococcus aureus (MRSA) infections in vitro and in vivo. Tethering CMP-Van-Lipo nanostructures to co-gels enabled sustained Van release and enhanced in vitro antibacterial effects against MRSA as compared to Van loaded co-gels or Van-Lipo loaded co-gels following multiple fresh bacterial inoculations over a period of 48 h. These results were successfully translated in vivo wherein MRSA infected wounds were effectively treated with CMP-Van-Lipo loaded co-gels for up to 9 days, whereas the activity of Van loaded co-gels and Van-Lipo loaded co-gels were limited to <2 days. Moreover, CMP-Van-Lipo retained in vivo antibacterial activity even after re-inoculation with bacteria; however, Van loaded co-gels and Van-Lipo loaded co-gels allowed significant bacterial growth demonstrating their limited efficacy. Altogether, these results provide proof-of-concept that CMP-Van-Lipo loaded co-gels can be effective topical formulations for preventive treatment of MRSA wound infections. STATEMENT OF SIGNIFICANCE: Current topical antimicrobial formulations (e.g., creams, gels, and ointments) do not control release, leaving antimicrobial concentrations either too high or too low at different time points, and provoking the development of antibacterial resistance and recurrence of wound infections. Here, collagen mimetic peptides (CMPs) were used to stably hybridize vancomycin-containing liposomal nanocarriers (CMP-Van-Lipo) within collagen-fibrin co-gels via triple-helical integration with collagen, enabling control over Van release for prolonged time periods and minimizing the adverse effects of the Lipo formulations on fibroblast cell viability in the wound bed. The CMP-Van-Lipo loaded co-gel's higher antibacterial effects in vitro were successfully translated in vivo for treatment of MRSA-infected mouse wounds, and thus the co-gels can be a potentially translatable treatment for improved clinical wound management.

Evaluation of bone-regeneration effects and ectopic osteogenesis of collagen membrane chemically conjugated with stromal cell-derived factor-1 in vivo

Because the collagen membrane lacks osteoinductivity, it must be modified with bioactive components to trigger rapid bone regeneration. In this study, we aimed to evaluate the bone regeneration effects of a collagen membrane chemically conjugated with stromal cell-derived factor-1 alpha (SDF-1α) in rat models. To this end, different collagen membranes from four groups including a control group with a Bio-Oss bone substitute + collagen membrane; physical adsorption group with Bio-Oss + SDF-1α physically adsorbed on the collagen membrane; chemical cross-linking group with Bio-Oss + SDF-1α chemically cross-linked to the collagen membrane; and cell-seeding group with Bio-Oss + bone marrow mesenchymal stem cells (BMSCs) seeded onto the collagen membrane were placed in critical-sized defect models using a guided bone regeneration technique. At 4 and 8 weeks, the specimens were analyzed by scanning electron microscopy, energy-dispersive x-ray spectroscopy, micro-computed tomography, and histomorphology analyzes. Furthermore, ectopic osteogenesis was examined by histological analysis with Von Kossa staining, with the samples counterstained by hematoxylin and eosin and immunohistochemical staining. The results showed that in the chemical cross-linking group and cell-seeding group, the bone volume fraction, bone surface area fraction, and trabecular number were significantly increased and showed more new bone formation compared to the control and physical adsorption groups. Von Kossa-stained samples counterstained with hematoxylin and eosin and subjected to immunohistochemical staining of 4-week implanted membranes revealed that the chemical cross-linking group had the largest number of microvessels. The collagen membrane chemically conjugated with SDF-1α to significantly promote new bone and microvessel formation compared to SDF-1α physical adsorption and showed similar effects on new bone formation as a BMSC seeding method. This study provided a cell-free approach for shortening the bone healing time and improving the success rate of guided bone regeneration.

Bio-orthogonal click reaction-enabled highly specific in situ cellularization of tissue engineering scaffolds

Tissue engineering generally utilizes natural or synthetic scaffolds to repair or replace damaged tissues. However, due to the lack of guidance of biological signals, most of the implanted scaffolds have always suffered from poor in vivo cellularization. Herein, we demonstrate a bio-orthogonal reaction-based strategy to realize in situ specific and fast cellularization of tissue engineering scaffold. DBCO-modified PCL-PEG (PCL-PEG-DBCO) polymer was synthesized and then fabricated into PCL-PEG-DBCO film through electrospinning. Meanwhile, azide-labeled macrophages (N₃ (+) macrophages) were obtained through metabolic glycoengineering. Through a series of in vitro dynamic and in vivo characterization, DBCO-modified films were noted to dramatically increase the selective capture efficiency and survival rate of N₃ (+) cells. Additionally, there is negligible influence of covalent conjugation on cell viability and proliferation, indicating the feasibility of the bio-orthogonal click reaction-based tissue engineering strategy. Overall, this work shows the advantages of an in situ bio-orthogonal click reaction in realizing highly specific, efficient, and long-lasting scaffold cellularization. We anticipate that this general strategy would be widely applicable and useful in tissue engineering and regenerative medicine in the near future.

Collagen Type I: A Versatile Biomaterial

Collagen type I is the most abundant matrix protein in the human body and is highly demanded in tissue engineering, regenerative medicine, and pharmaceutical applications. To meet the uprising demand in biomedical applications, collagen type I has been isolated from mammalians (bovine, porcine, goat and rat) and non-mammalians (fish, amphibian, and sea plant) source using various extraction techniques. Recent advancement enables fabrication of collagen scaffolds in multiple forms such as film, sponge, and hydrogel, with or without other biomaterials. The scaffolds are extensively used to develop tissue substitutes in regenerating or repairing diseased or damaged tissues. The 3D scaffolds are also used to develop in vitro model and as a vehicle for delivering drugs or active compounds.

Collagen-Based Tissue Engineering Strategies for Vascular Medicine

Cardiovascular diseases (CVDs) account for the 31% of total death per year, making them the first cause of death in the world. Atherosclerosis is at the root of the most life-threatening CVDs. Vascular bypass/replacement surgery is the primary therapy for patients with atherosclerosis. The use of polymeric grafts for this application is still burdened by high-rate failure, mostly caused by thrombosis and neointima hyperplasia at the implantation site. As a solution for these problems, the fast re-establishment of a functional endothelial cell (EC) layer has been proposed, representing a strategy of crucial importance to reduce these adverse outcomes. Implant modifications using molecules and growth factors with the aim of speeding up the re-endothelialization process has been proposed over the last years. Collagen, by virtue of several favorable properties, has been widely studied for its application in vascular graft enrichment, mainly as a coating for vascular graft luminal surface and as a drug delivery system for the release of pro-endothelialization factors. Collagen coatings provide receptor-ligand binding sites for ECs on the graft surface and, at the same time, act as biological sealants, effectively reducing graft porosity. The development of collagen-based drug delivery systems, in which small-molecule and protein-based drugs are immobilized within a collagen scaffold in order to control their release for biomedical applications, has been widely explored. These systems help in protecting the biological activity of the loaded molecules while slowing their diffusion from collagen scaffolds, providing optimal effects on the targeted vascular cells. Moreover, collagen-based vascular tissue engineering substitutes, despite not showing yet optimal mechanical properties for their use in the therapy, have shown a high potential as physiologically relevant models for the study of cardiovascular therapeutic drugs and diseases. In this review, the current state of the art about the use of collagen-based strategies, mainly as a coating material for the functionalization of vascular graft luminal surface, as a drug delivery system for the release of pro-endothelialization factors, and as physiologically relevant in vitro vascular models, and the future trend in this field of research will be presented and discussed.

In vitro evaluation of functionalized decellularized muscle scaffold for in situ skeletal muscle regeneration

Current treatment options for repairing volumetric muscle loss injury involve the use of existing host tissue like muscular flaps or grafts. However, host muscle tissue may not be available and donor site morbidity, such as functional loss and volume deficiency, is often present. In this study, we developed a biofunctionalized muscle-derived decellularized extracellular matrix scaffolding system to utilize endogenous stem/progenitor cells for in situ muscle tissue regeneration. We optimized the decellularization process to enhance cellular infiltration and fabricated an insulin-like growth factor-binding protein 3 (IGFBP-3)-conjugated scaffold for controlled delivery of IGF-I. We then tested in vitro characterization including IGF-I release kinetics and cellular infiltration. In addition, we have analyzed the bioactivities of skeletal muscle cells (C2C12) to assess the indirect effect of released IGF-1 from the scaffold. The IGFBP-3 conjugated scaffolds demonstrated showed sustained release of IGF-1 and 1% SDS decellularized scaffold with IGF-1 showed higher cellular infiltration compared to control scaffolds (no conjugation). In indirect bioactivity assay, IGF-1 conjugated scaffold showed 2.1-fold increased cell activity compared to control (fresh media). Our results indicate that IGFBP-3/IGF-I conjugated scaffold has the potential to be used for in situ muscle tissue regeneration.

Local pharmacological induction of angiogenesis: Drugs for cells and cells as drugs

The past decades have seen significant advances in pro-angiogenic strategies based on delivery of molecules and cells for conditions such as coronary artery disease, critical limb ischemia and stroke. Currently, three major strategies are evolving. Firstly, various pharmacological agents (growth factors, interleukins, small molecules, DNA/RNA) are locally applied at the ischemic region. Secondly, preparations of living cells with considerable bandwidth of tissue origin, differentiation state and preconditioning are delivered locally, rarely systemically. Thirdly, based on the notion, that cellular effects can be attributed mostly to factors secreted in situ, the cellular secretome (conditioned media, exosomes) has come into the spotlight. We review these three strategies to achieve (neo)angiogenesis in ischemic tissue with focus on the angiogenic mechanisms they tackle, such as transcription cascades, specific signalling steps and cellular gases. We also include cancer-therapy relevant lymphangiogenesis, and shall seek to explain why there are often conflicting data between in vitro and in vivo. The lion's share of data encompassing all three approaches comes from experimental animal work and we shall highlight common technical obstacles in the delivery of therapeutic molecules, cells, and secretome. This plethora of preclinical data contrasts with a dearth of clinical studies. A lack of adequate delivery vehicles and standardised assessment of clinical outcomes might play a role here, as well as regulatory, IP, and manufacturing constraints of candidate compounds; in addition, completed clinical trials have yet to reveal a successful and efficacious strategy. As the biology of angiogenesis is understood well enough for clinical purposes, it will be a matter of time to achieve success for well-stratified patients, and most probably with a combination of compounds.

Matrix-assisted cell transplantation for tissue vascularization

Cell therapy offers much promise for the treatment of ischemic diseases by augmenting tissue vasculogenesis. Matrix-assisted cell transplantation (MACT) has been proposed as a solution to enhance cell survival and integration with host tissue following transplantation. By designing semi synthetic matrices (sECM) with the correct physical and biochemical signals, encapsulated cells are directed towards a more angiogenic phenotype. In this review, we describe the choice of cells suitable for pro-angiogenic therapies, the properties that should be considered when designing sECM for transplantation and their relative importance. Pre-clinical models where MACT has been successfully applied to promote angiogenesis are reviewed to show the great potential of this strategy to treat ischemic conditions.

Limiting angiogenesis to modulate scar formation

Angiogenesis, the process of new blood vessel formation from existing blood vessels, is a key aspect of virtually every repair process. During wound healing an extensive, but immature and leaky vascular plexus forms which is subsequently reduced by regression of non-functional vessels. More recent studies indicate that uncontrolled vessel growth or impaired vessel regression as a consequence of an excessive inflammatory response can impair wound healing, resulting in scarring and dysfunction. However, in order to elucidate targetable factors to promote functional tissue regeneration we need to understand the molecular and cellular underpinnings of physiological angiogenesis, ranging from induction to resolution of blood vessels. Especially for avascular tissues (e.g. cornea, tendon, ligament, cartilage, etc.), limiting rather than boosting vessel growth during wound repair potentially is beneficial to restore full tissue function and may result in favourable long-term healing outcomes.

[The application and research progress of in-situ tissue engineering technology in bone and cartilage repair]

Objective

To review the application and research progress of in-situ tissue engineering technology in bone and cartilage repair.

Methods

The original articles about in-situ tissue engineering technology in bone and cartilage repair were extensively reviewed and analyzed.

Results

In-situ tissue engineering have been shown to be effective in repairing bone defects and cartilage defects, but biological mechanisms are inadequate. At present, most of researches are mainly focused on animal experiments, and the effect of clinical repair need to be further studied.

Conclusion

In-situ tissue engineering technology has wide application prospects in bone and cartilage tissue engineering. However, further study on the mechanism of related cytokines need to be conducted.

Enhanced wound healing in diabetic rats by nanofibrous scaffolds mimicking the basketweave pattern of collagen fibrils in native skin

Nanofibrous scaffolds that offer proper microenvironmental cues to promote the healing process are highly desirable for patients with chronic wounds. Although studies have shown that fiber organization regulates cell behaviors in vitro, little is known about its effects on the wound healing process in vivo. Most of the nanofibrous scaffolds currently used in skin repair are randomly oriented. Herein, inspired by the basketweave-like pattern of collagen fibrils in native skin, we fabricated biomimetic nanofibrous scaffolds with crossed fiber organization via electrospinning. The regulation of crossed nanofibrous scaffolds on fibroblasts was compared with that of aligned and random nanofibrous scaffolds. Unexpectedly, crossed nanofibrous scaffolds induced different cellular responses in fibroblasts, including differences in cellular morphology, migration and wound healing related gene expression, in comparison to either aligned or random nanofibrous scaffolds. More importantly, the regulation of nanofibrous scaffolds with different fiber organizations on wound repair was systematically investigated in diabetic rats. While the healing processes were enhanced by all nanofibrous scaffolds, wounds treated with crossed nanofibrous scaffolds achieved the best healing outcome, which was evidenced by the resolution of inflammation, the accelerated migration of fibroblasts and keratinocytes, and the promotion of angiogenesis. These findings helped reveal the role of fiber organization in regulating the wound healing process in vivo and suggest the potential utility of biomimetic crossed nanofibrous scaffolds for the repair of chronic wounds.

Collagen as Coating Material for 45S5 Bioactive Glass-Based Scaffolds for Bone Tissue Engineering

Highly porous 45S5 bioactive glass-based scaffolds were fabricated by the foam replica technique and coated with collagen by a novel method. After an initial cleaning step of the bioactive glass surface to expose reactive –OH groups, samples were surface functionalized by (3-aminopropyl)triethoxysilane (APTS). Functionalized scaffolds were immersed in a collagen solution, left for gelling at 37 °C, and dried at room temperature. The collagen coating was further stabilized by crosslinking with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS). Applying this coating method, a layer thickness of a few micrometers was obtained without affecting the overall scaffold macroporosity. In addition, values of compressive strength were enhanced by a factor of five, increasing from 0.04 ± 0.02 MPa for uncoated scaffolds to 0.18 ± 0.03 MPa for crosslinked collagen-coated scaffolds. The composite material developed in this study exhibited positive cell (MG-63) viability as well as suitable cell attachment and proliferation on the surface. The combination of bioactivity, mechanical competence, and cellular response makes this novel scaffold system attractive for bone tissue engineering.

Fractal characteristics of the microvascular network: A useful index to assess vascularization level of porous silk fibroin biomaterial

The neovascularization of biomaterials for tissue engineering is not only related to growth of capillaries but also involves appropriate hierarchy distribution of the microvessels. In this study, we proposed hierarchy distribution contrast method which can assess vascular transport capacity, in order to examine the hierarchy distribution of the neovessels during vascularization of the porous silk fibroin biomaterials implanted into rats and its evolution. The results showed that the fractal characteristics appeared toward the end of the vascularization stages, and the structure of the microvascular network after 3 weeks of implantation was similar to the fractal microvascular tree with bifurcation exponent x = 3 and fractal dimension D = 1.46, which became a sign of maturation of the regenerative vasculature. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2276-2290, 2017.

Optimizing the host substrate environment for cardiac angiogenesis, arteriogenesis, and myogenesis

INTRODUCTION

The diseased host milieu, such as endothelial dysfunction (ED), decreased NO bioavailability, and ischemic/inflammatory post-MI environment, hamper the clinical success of existing cardiac regenerative therapies. Area covered: In this article, current strategies including pharmacological and nonpharmacological approaches for improving the diseased host milieu are reviewed. Specifically, the authors provide focus on: i) the mechanism of ED in patients with cardiovascular diseases, ii) the current results of ED improving strategies in pre-clinical and clinical studies, and iii) the use of biomaterials as a novel modulator in damaged post-MI environment. Expert opinion: Adjunct therapies which improve host endothelial function have demonstrated promising outcomes, potentially overcoming disappointing results of cell therapy in human studies. In the future, elucidation of the interactions between the host tissue and therapeutic agents, as well as downstream signaling pathways, will be the next challenges in enhancing regenerative therapy. More careful investigations are also required to establish these agents' safety and efficacy for wide usage in humans.

How Biomaterials Can Influence Various Cell Types in the Repair and Regeneration of the Heart after Myocardial Infarction

The healthy heart comprises many different cell types that work together to preserve optimal function. However, in a diseased heart the function of one or more cell types is compromised which can lead to many adverse events, one of which is myocardial infarction (MI). Immediately after MI, the cardiac environment is characterized by excessive cardiomyocyte death and inflammatory signals leading to the recruitment of macrophages to clear the debris. Proliferating fibroblasts then invade, and a collagenous scar is formed to prevent rupture. Better functional restoration of the heart is not achieved due to the limited regenerative capacity of cardiac tissue. To address this, biomaterial therapy is being investigated as an approach to improve regeneration in the infarcted heart, as they can possess the potential to control cell function in the infarct environment and limit the adverse compensatory changes that occur post-MI. Over the past decade, there has been considerable research into the development of biomaterials for cardiac regeneration post-MI; and various effects have been observed on different cell types depending on the biomaterial that is applied. Biomaterial treatment has been shown to enhance survival, improve function, promote proliferation, and guide the mobilization and recruitment of different cells in the post-MI heart. This review will provide a summary on the biomaterials developed to enhance cardiac regeneration and remodeling post-MI with a focus on how they control macrophages, cardiomyocytes, fibroblasts, and endothelial cells. A better understanding of how a biomaterial interacts with the different cell types in the heart may lead to the development of a more optimized biomaterial therapy for cardiac regeneration.

Co‑delivery and controlled release of stromal cell‑derived factor‑1α chemically conjugated on collagen scaffolds enhances bone morphogenetic protein‑2‑driven osteogenesis in rats

There has been considerable focus in investigations on the delivery systems and clinical applications of bone morphogenetic protein-2 (BMP-2) for novel bone formation. However, current delivery systems require high levels of BMP-2 to exert a biological function. There are several concerns in using of high levels of BMP-2, including safety and the high cost of treatment. Therefore, the development of strategies to decrease the levels of BMP-2 required in these delivery systems is required. In our previous studies, a controlled-release system was developed, which used Traut's reagent and the cross-linker, 4-(N-maleimi-domethyl) cyclohexane-1-carboxylic acid 3-sulfo-N-hydroxysuccinimide ester sodium salt (Sulfo-SMCC), to chemically conjugate BMP-2 directly on collagen discs. In the current study, retention efficiency and release kinetics of stromal cell-derived factor-1α (SDF-1α) cross-linked on collagen scaffolds were detected. In addition, the osteogenic activity of SDF-1α and suboptimal doses of BMP-2 cross-linked on collagen discs following subcutaneous implantation in rats were evaluated. Independent two-tailed t-tests and one-way analysis of variance were used for analysis. In the present study, the controlled release of SDF-1α chemically conjugated on collagen scaffolds was demonstrated. By optimizing the concentrations of Traut's reagent and the Sulfo-SMCC cross-linker, a significantly higher level of SDF-1α was covalently retained on the collagen scaffold, compared with that retained using a physical adsorption method. Mesenchymal stem cell homing indicated that the biological function of the SDF-1α cross-linked on the collagen scaffolds remained intact. In rats, co-treatment with SDF-1α and a suboptimal dose of BMP-2 cross-linked on collagen scaffolds using this chemically conjugated method induced higher levels of ectopic bone formation, compared with the physical adsorption method. No ectopic bone formation was observed following treatment with a suboptimal dose of BMP-2 alone. Therefore, the co-delivery of SDF-1α and a suboptimal dose of BMP-2 chemically conjugated on collagen scaffolds for the treatment of bone injuries reduced the level of BMP-2 required, reducing the risks of side effects.

Secreted Endothelial Cell Factors Immobilized on Collagen Scaffolds Enhance the Recipient Endothelial Cell Environment

Strategies to design novel vascular scaffolds are a continuing aim in tissue engineering and often such designs encompass the use of recombinant factors to enhance the performance of the scaffold. The established use of cell secretion utilized in feeder systems and conditioned media offer a source of paracrine factors, which has potential to be used in tissue-engineered (TE) scaffolds. Here we utilize this principle from endothelial cells (ECs), to create a novel TE scaffold by harnessing secreted factors and immobilizing these to collagen scaffolds. This research revealed increased cellular attachment and positive angiogenic gene upregulation responses in recipient ECs grown on these conditioned scaffolds. Also, the conditioning method did not affect the mechanical structural integrity of the scaffolds. These results may advocate the potential use of this system to improve vascular scaffolds' in vivo performance. In addition, this process may be a future method utilized to improve other tissue engineering scaffold therapies.

TGF-β1 conjugated chitosan collagen hydrogels induce chondrogenic differentiation of human synovium-derived stem cells

Background

Unlike bone tissue, articular cartilage regeneration has not been very successful and has many challenges ahead. We have previously developed injectable hydrogels using photopolymerizable chitosan (MeGC) that supported growth of chondrocytes. In this study, we demonstrate a biofunctional hydrogel for specific use in cartilage regeneration by conjugating transforming growth factor-β1 (TGF-β1), a well-documented chondrogenic factor, to MeGC hydrogels impregnating type II collagen (Col II), one of the major cartilaginous extracellular matrix (ECM) components.

Results

TGF-β1 was delivered from MeGC hydrogels in a controlled manner with reduced burst release by chemically conjugating the protein to MeGC. The hydrogel system did not compromise viability of encapsulated human synovium-derived mesenchymal stem cells (hSMSCs). Col II impregnation and TGF-β1 delivery significantly enhanced cellular aggregation and deposition of cartilaginous ECM by the encapsulated cells, compared with pure MeGC hydrogels.

Conclusions

This study demonstrates successful engineering of a biofunctional hydrogel with a specific microenvironment tailored to promote chondrogenesis. This hydrogel system can provide promising efficacious therapeutics in the treatment of cartilage defects.

Electronic supplementary material

The online version of this article (doi:10.1186/1754-1611-9-1) contains supplementary material, which is available to authorized users.

Photopatterning of vascular endothelial growth factor within collagen-glycosaminoglycan scaffolds can induce a spatially confined response in human umbilical vein endothelial cells

Biomolecular signals within the native extracellular matrix are complex, with bioactive factors found in both soluble and sequestered states. In the design of biomaterials for tissue engineering applications it is increasingly clear that new approaches are required to locally tailor the biomolecular environment surrounding cells within the matrix. One area of particular focus is strategies to improve the speed or quality of vascular ingrowth and remodeling. While the addition of soluble vascular endothelial growth factor (VEGF) has been shown to improve vascular response, strategies to immobilize such signals within a biomaterial offer the opportunity to optimize efficiency and to explore spatially defined patterning of such signals. Here we describe the use of benzophenone (BP) photolithography to decorate three-dimensional collagen-glycosaminoglycan (CG) scaffolds with VEGF in a spatially defined manner. In this effort we demonstrate functional patterning of a known agonist of vascular remodeling and directly observe phenotypic effects induced by this immobilized cue. VEGF was successfully patterned in both stripes and square motifs across the scaffold with high specificity (on:off pattern signal). The depth of patterning was determined to extend up to 500 μm into the scaffold microstructure. Notably, photopatterned VEGF retained native functionality as it was shown to induce morphological changes in human umbilical vein cells indicative of early vasculogenesis. Immobilized VEGF led to greater cell infiltration into the scaffold and the formation of immature vascular network structures. Ultimately, these results suggest that BP-mediated photolithography is a facile method to spatially control the presentation of instructive biological cues to cells within CG scaffolds.

Acceleration of wound healing in acute full-thickness skin wounds using a collagen-binding peptide with an affinity for MSCs

Mesenchymal stem cells (MSCs) have been accepted as a promising cell source in tissue repair and regeneration. However, the inability to enrich MSCs in target areas limits their wide application. As a result, it has been a major goal to induce MSCs to be abundantly and specifically recruited to the injury site. In this study, a peptide with a specific affinity for MSCs (E7 peptide) was immobilized to a collagen scaffold via a collagen-binding domain (CBD) to construct a functional collagen scaffold. In addition, the hypothesis that this method could recruit MSCs specifically was evaluated in a porcine model. In vivo investigations indicated that due to the immunore-action, the CBD-MSC-peptide collagen scaffold enhanced MSC adhesion and infiltration and promoted wound healing. At day 7 after surgery, we found more infiltrating cells and capillaries in the Collagen/CBD-E7 peptide group compared to the Scaffold group. At day 14, 21 and 28, a faster healing process was observed in the Collagen/CBD-E7 peptide group, with significant differences compared with the other groups (P < 0.05, P < 0.01). The results demonstrate the potential use of targeted therapy to rapidly heal skin wounds.

Chemical activation and changes in surface morphology of poly(ε-caprolactone) modulate VEGF responsiveness of human endothelial cells

The high degree of clinical routine in percutaneous transluminal coronary angioplasty (PTCA) with and without stenting has not changed the fact that a large number of coronary heart disease patients are still affected by post-operative complications such as restenosis and thrombosis. Because re-endothelialization is the crucial aspect of wound healing after cardiovascular implant surgery, there is a need for modern biomaterials to aid endothelial cells in their adhesion and functional recovery post-stenting. This study systematically examines the potential of numerous chemical polymer modifications with regard to endothelialization. Poly(ε-caprolactone) (PCL) and its chemically activated forms are investigated in detail, as well as the impact of polymer surface morphology and precoating with matrix protein. Human umbilical vein endothelial cells (HUVECs) are used to characterize endothelial cell responses in terms of in vitro viability and adhesion. As a potential component in drug eluting implants, VEGF is applied as stimulus to boost endothelial cell proliferation on the polymer. In conclusion, plasma chemical activation of PCL combined with VEGF stimulation best enhances in vitro endothelialization. Examining the impact of morphological, chemical and biological modifications of PCL, this study makes an important new contribution towards the existing body of work on polymer endothelialization.

Bladder acellular matrix conjugated with basic fibroblast growth factor for bladder regeneration

Basic fibroblast growth factor (bFGF) plays an important role in wound repair and tissue regeneration. Considerable research has been focused on the exploration of bFGF delivery systems for maintaining efficient local concentration at the injury sites. In this study, bFGF was chemically crosslinked to the bladder acellular matrix (BAM) to create specific binding between bFGF and BAM. The BAM scaffold conjugated with bFGF (CL-BAM/bFGF) could bind more bFGF and achieve controlled release of bFGF, which promoted human fibroblasts to proliferate in vitro and accelerated cellularization and vascularization after subcutaneous implantation. Using the rat bladder reconstruction model, the CL-BAM/bFGF group showed better tissue regeneration compared with the other groups. In summary, CL-BAM/bFGF could prevent the diffusion of bFGF from BAM and maintain its activity. Thus, the scaffold conjugated with growth factor systems could be an effective way for maintaining local therapy dosage at the target site in wound repair and tissue regeneration.

Mimicking the extracellular matrix with functionalized, metal-assembled collagen peptide scaffolds

Natural and synthetic three-dimensional (3-D) scaffolds that mimic the microenvironment of the extracellular matrix (ECM), with growth factor storage/release and the display of cell adhesion signals, offer numerous advantages for regenerative medicine and in vitro morphogenesis and oncogenesis modeling. Here we report the design of collagen mimetic peptides (CMPs) that assemble into a highly crosslinked 3-D matrix in response to metal ion stimuli, that may be functionalized with His-tagged cargoes, such as green fluorescent protein (GFP-His8) and human epidermal growth factor (hEGF-His6). The bound hEGF-His6 was found to gradually release from the matrix in vitro and induce cell proliferation in the EGF-dependent cell line MCF10A. The additional incorporation of a cell adhesion sequence (RGDS) at the N-terminus of the CMP creates an environment that facilitated the organization of matrix-encapsulated MCF10A cells into spheroid structures, thus mimicking the ECM environment.

Growth factor conjugation: strategies and applications

Growth factors, first known for their essential role in the initiation of mitosis, are required for a variety of cellular processes and their localized delivery is considered as a rational approach in their therapeutic application to assure a safe and effective treatment while avoiding unwanted adverse effects. Noncovalent immobilization of growth factors as well as their covalent conjugation is amongst the most common strategies for localized delivery of growth factors. Today, immobilized and covalently conjugated growth factors are considered as a promising drug design and are widely used for protein reformulation and material design to cover the unwanted characteristics of growth factors as well as improving their functions. Selection of a suitable conjugation technique depends on the substrate chemistry and the availability of functional reactive groups in the structure of growth factor, the position of reactive groups in growth factor molecules and its relation with the receptor binding area, and the intention of creating either patterned or unpatterned conjugation. Various approaches for growth factor reformulation have been reported. This review provides an overview on chemical conjugation of growth factors and covers the relevant studies accomplished for bioconjugation of growth factors and their related application.

Human collagen produced in plants: more than just another molecule

Consequential to its essential role as a mechanical support and affinity regulator in extracellular matrices, collagen constitutes a highly sought after scaffolding material for regeneration and healing applications. However, substantiated concerns have been raised with regard to quality and safety of animal tissue-extracted collagen, particularly in relation to its immunogenicity, risk of disease transmission and overall quality and consistency. In parallel, contamination with undesirable cellular factors can significantly impair its bioactivity, vis-a-vis its impact on cell recruitment, proliferation and differentiation. High-scale production of recombinant human collagen Type I (rhCOL1) in the tobacco plant provides a source of an homogenic, heterotrimeric, thermally stable "virgin" collagen which self assembles to fine homogenous fibrils displaying intact binding sites and has been applied to form numerous functional scaffolds for tissue engineering and regenerative medicine. In addition, rhCOL1 can form liquid crystal structures, yielding a well-organized and mechanically strong membrane, two properties indispensable to extracellular matrix (ECM) mimicry. Overall, the shortcomings of animal- and cadaver-derived collagens arising from their source diversity and recycled nature are fully overcome in the plant setting, constituting a collagen source ideal for tissue engineering and regenerative medicine applications.

Strategies for controlled delivery of growth factors and cells for bone regeneration

The controlled delivery of growth factors and cells within biomaterial carriers can enhance and accelerate functional bone formation. The carrier system can be designed with pre-programmed release kinetics to deliver bioactive molecules in a localized, spatiotemporal manner most similar to the natural wound healing process. The carrier can also act as an extracellular matrix-mimicking substrate for promoting osteoprogenitor cellular infiltration and proliferation for integrative tissue repair. This review discusses the role of various regenerative factors involved in bone healing and their appropriate combinations with different delivery systems for augmenting bone regeneration. The general requirements of protein, cell and gene therapy are described, with elaboration on how the selection of materials, configurations and processing affects growth factor and cell delivery and regenerative efficacy in both in vitro and in vivo applications for bone tissue engineering.