Electrospun elastin-like polypeptide enriched polyurethanes and their interactions with vascular smooth muscle cells

Physiological cyclic stretching potentiates the cell-cell junctions in vascular endothelial layer formed on aligned fiber substrate

In vascular tissue engineering, formation of stable endothelial cell-cell and cell-substrate adhesions is essential for maintaining long-term patency of the tissue-engineered vascular grafts (TEVGs). In this study, sheet-like aligned fibrous substrates of poly(l-lactide-co-caprolactone) (PLCL) were prepared by electrospinning to provide basement membrane-resembling structural support to endothelial cells (ECs). Cyclic stretching at physiological and pathological levels was then applied to human umbilical vein endothelial cells (HUVECs) cultured on chosen fibrous substrate using a force-loading device, from which effects of the cyclic stretching on cell-cell and cell-substrate adhesions were examined. It was found that applying uniaxial 1 Hz cyclic stretch at physiological levels (5 % and 10 % elongation) strengthened the cell-cell junctions, thus leading to improved structural integrity, functional expression and resistance to thrombin-induced damaging impacts in the formed endothelial layer. The cell-cell junctions were disrupted at pathological level (15 % elongation) cyclic stretching, which however facilitated the formation of focal adhesions (FAs) at cell-substrate interface. Mechanistically, the effects of cyclic stretching on endothelial cell-cell and cell-substrate adhesions were identified to be correlated with the RhoA/ROCK signaling pathway. Results from this study highlight the relevance between applying dynamic mechanical stimulation and maintaining the structural integrity of the formed endothelial layer, and implicate a necessity to implement appropriate dynamic mechanical training (i.e., preconditioning) to obtain tissue-engineered blood vessels with long-term patency post-implantation.

Modulation of Smooth Muscle Cell Phenotype for Translation of Tissue-Engineered Vascular Grafts

Translation of small-diameter tissue-engineered vascular grafts (TEVGs) for the treatment of coronary artery disease (CAD) remains an unfulfilled promise. This is largely due to the limited integration of TEVGs into the native vascular wall-a process hampered by the insufficient smooth muscle cell (SMC) infiltration and extracellular matrix deposition, and low vasoactivity. These processes can be promoted through the judicious modulation of the SMC toward a synthetic phenotype to promote remodeling and vascular integration; however, the expression of synthetic markers is often accompanied by a decrease in the expression of contractile proteins. Therefore, techniques that can precisely modulate the SMC phenotypical behavior could have the potential to advance the translation of TEVGs. In this review, we describe the phenotypic diversity of SMCs and the different environmental cues that allow the modulation of SMC gene expression. Furthermore, we describe the emerging biomaterial approaches to modulate the SMC phenotype in TEVG design and discuss the limitations of current techniques. In addition, we found that current studies in tissue engineering limit the analysis of the SMC phenotype to a few markers, which are often the characteristic of early differentiation only. This limited scope has reduced the potential of tissue engineering to modulate the SMC toward specific behaviors and applications. Therefore, we recommend using the techniques presented in this review, in addition to modern single-cell proteomics analysis techniques to comprehensively characterize the phenotypic modulation of SMCs. Expanding the holistic potential of SMC modulation presents a great opportunity to advance the translation of living conduits for CAD therapeutics.

Biological properties of self-assembled nanofibers of elastin-like block polypeptides for tissue-engineered vascular grafts: platelet inhibition, endothelial cell activation and smooth muscle cell maintenance

Strategic materials design is essential for the development of small-diameter, tissue-engineered vascular grafts. Self-assembled nanofibers of elastin-like polypeptides represent promising vascular graft components as they replicate the organized elastin structure of native blood vessels. Further, the bioactivity of nanofibers can be modified by the addition of functional peptide motifs. In the present study, we describe the development of a novel nanofiber-forming elastin-like polypeptide (ELP) with an arginine-glutamic acid-aspartic acid-valine (REDV) sequence. The biological characteristics of the REDV-modified ELP nanofibers relevant to applications in vascular grafting were compared to ELP without ligands for integrin, ELP with arginine-glycine-aspartic acid (RGD) sequence, collagen and cell culture glass. Among them, REDV-modified ELP nanofibers met the preferred biological properties for vascular graft materials, i.e. (i) inhibition of platelet adhesion and activation, (ii) endothelial cell adhesion and proliferation and (iii) maintenance of smooth muscle cells in a contractile phenotype to prevent cell overgrowth. The results indicate that REDV-modified ELP nanofibers represent promising candidates for the further development of small-diameter vascular grafts.

Rational design of biodegradable thermoplastic polyurethanes for tissue repair

As a type of elastomeric polymers, non-degradable polyurethanes (PUs) have a long history of being used in clinics, whereas biodegradable PUs have been developed in recent decades, primarily for tissue repair and regeneration. Biodegradable thermoplastic (linear) PUs are soft and elastic polymeric biomaterials with high mechanical strength, which mimics the mechanical properties of soft and elastic tissues. Therefore, biodegradable thermoplastic polyurethanes are promising scaffolding materials for soft and elastic tissue repair and regeneration. Generally, PUs are synthesized by linking three types of changeable blocks: diisocyanates, diols, and chain extenders. Alternating the combination of these three blocks can finely tailor the physio-chemical properties and generate new functional PUs. These PUs have excellent processing flexibilities and can be fabricated into three-dimensional (3D) constructs using conventional and/or advanced technologies, which is a great advantage compared with cross-linked thermoset elastomers. Additionally, they can be combined with biomolecules to incorporate desired bioactivities to broaden their biomedical applications. In this review, we comprehensively summarized the synthesis, structures, and properties of biodegradable thermoplastic PUs, and introduced their multiple applications in tissue repair and regeneration. A whole picture of their design and applications along with discussions and perspectives of future directions would provide theoretical and technical supports to inspire new PU development and novel applications.

Compatibility and function of human induced pluripotent stem cell derived cardiomyocytes on an electrospun nanofibrous scaffold, generated from an ionomeric polyurethane composite

Synthetic scaffolds are needed for generating organized neo-myocardium constructs to promote functional tissue repair. This study investigated the biocompatibility of an elastomeric electrospun degradable polar/hydrophobic/ionic polyurethane (D-PHI) composite scaffold with human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs). The composite material was electrospun to generate scaffolds, with nanofibres oriented in aligned or random directions. These features enabled the authors to evaluate the effect of characteristic elements which mimic that of the native extracellular matrix (alignment, chemical heterogeneity, and fiber topography) on hiPSC-CMs activity. The functional nature of the hiPSC-CM cultured on gelatin and Matrigel-coated scaffolds were assessed, investigating the influence of protein interactions with the synthetic substrate on subsequent cell phenotype. After 7 days of culture, high hiPSC-CM viability was observed on the scaffolds. The cells on the aligned scaffold were elongated and demonstrated aligned sarcomeres that oriented parallel to the direction of the fibers, while the cells on random scaffolds and a tissue culture polystyrene (TCPS) control did not exhibit such an organized morphology. The hiPSC-CMs cultured on the scaffolds and TCPS expressed similar levels of cardiac troponin-T, but there was a higher expression of ventricular myosin light chain-2 on the D-PHI composite scaffolds versus TCPS, indicating a higher proportion of hiPSC-CM exhibiting a ventricular cardiomyocyte like phenotype. Within 7 days, the hiPSC-CMs on aligned scaffolds and TCPS beat synchronously and had similar conductive velocities. These preliminary results show that aligned D-PHI elastomeric scaffolds allow hiPSC-CMs to demonstrate important cardiomyocytes characteristics, critical to enabling their future potential use for cardiac tissue regeneration.

A critical review of fibrous polyurethane-based vascular tissue engineering scaffolds

Certain polymeric materials such as polyurethanes (PUs) are the most prevalent class of used biomaterials in regenerative medicine and have been widely explored as vascular substitutes in several animal models. It is thought that PU-based biomaterials possess suitable hemo-compatibility with comparable performance related to the normal blood vessels. Despite these advantages, the possibility of thrombus formation and restenosis limits their application as artificial functional vessels. In this regard, various surface modification approaches have been developed to enhance both hemo-compatibility and prolong patency. While critically reviewing the recent advances in vascular tissue engineering, mainly PU grafts, this paper summarizes the application of preferred cell sources to vascular regeneration, physicochemical properties, and some possible degradation mechanisms of PU to provide a more extensive perspective for future research.

Bio-functionalization and in-vitro evaluation of titanium surface with recombinant fibronectin and elastin fragment in human mesenchymal stem cell

Titanium is a biomaterial that meets a number of important requirements, including excellent mechanical and chemical properties, but has low bioactivity. To improve cellular response onto titanium surfaces and hence its osseointegration, the titanium surface was bio-functionalized to mimic an extracellular matrix (ECM)-like microenvironment that positively influences the behavior of stem cells. In this respect, fibronectin and elastin are important components of the ECM that regulate stem cell differentiation by supporting the biological microenvironment. However, each native ECM is unsuitable due to its high production cost and immunogenicity. To overcome these problems, a recombinant chimeric fibronectin type III_9-10 and elastin-like peptide fragments (FN9-10_ELP) was developed herein and applied to the bio-functionalized of the titanium surface. An evaluation of the biological activity and cellular responses with respect to bone regeneration indicated a 4-week sustainability on the FN9-10_ELP functionalized titanium surface without an initial burst effect. In particular, the adhesion and proliferation of human mesenchymal stem cells (hMSCs) was significantly increased on the FN9-10_ELP coated titanium compared to that observed on the non-coated titanium. The FN9-10_ELP coated titanium induced osteogenic differentiation such as the alkaline phosphatase (ALP) activity and mineralization activity. In addition, expressions of osteogenesis-related genes such as a collagen type I (Col I), Runt-related transcription factor 2 (RUNX2), osteopontin (OPN), osteocalcin (OCN), bone sialo protein (BSP), and PDZ-binding motif (TAZ) were further increased. Thus, in vitro the FN9-10_ELP functionalization titanium not only sustained bioactivity but also induced osteogenic differentiation of hMSCs to improve bone regeneration.

Endothelial Cell Migration Regulated by Surface Topography of Poly(ε-caprolactone) Nanofibers

The study of cell migration on biomaterials is of great significance in tissue engineering and regenerative medicine. In recent years, there has been increasing evidence that the physical properties of the extracellular matrix (ECM), such as surface topography, affect various cellular behaviors such as proliferation, adhesion, and migration. However, the biological mechanism of surface topography influencing cellular behavior is still unclear. In this study, we prepared polycaprolactone (PCL) fibrous materials with different surface microstructures by solvent casting, electrospinning, and self-induced crystallization. The corresponding topographical structure obtained is a two-dimensional (2D) flat surface, 2.5-dimensional (2.5D) fibers, and three-dimensional (3D) fibers with a multilevel microstructure. We then investigated the effects of the complex topographical structure on endothelial cell migration. Our study demonstrates that cells can sense the changes of micro- and nanomorphology on the surface of materials, adapt to the physical environment through biochemical reactions, and regulate actin polymerization and directional migration through Rac1 and Cdc42. The cells on the nanofibers are elongated spindles, and the positive feedback of cell adhesion and actin polymerization along the fiber direction makes the plasma membrane continue to protrude, promoting cell polarization and directional migration. This study might provide new insights into the biomaterial design, especially those used for artificial vascular grafts.

Electrospun nanofiber scaffold for vascular tissue engineering

Due to the prevalence of cardiovascular diseases, there is a large need for small diameter vascular grafts that cannot be fulfilled using autologous vessels. Although medium to large diameter synthetic vessels are in use, no suitable small diameter vascular graft has been developed due to the unique dynamic environment that exists in small vessels. To achieve long term patency, a successful tissue engineered vascular graft would need to closely match the mechanical properties of native tissue, be non-thrombotic and non-immunogenic, and elicit the proper healing response and undergo remodeling to incorporate into the native vasculature. Electrospinning presents a promising approach to the development of a suitable tissue engineered vascular graft. This review provides a comprehensive overview of the different polymers, techniques, and functionalization approaches that have been used to develop an electrospun tissue engineered vascular graft.

Fibrous Scaffolds From Elastin-Based Materials

Current cutting-edge strategies in biomaterials science are focused on mimicking the design of natural systems which, over millions of years, have evolved to exhibit extraordinary properties. Based on this premise, one of the most challenging tasks is to imitate the natural extracellular matrix (ECM), due to its ubiquitous character and its crucial role in tissue integrity. The anisotropic fibrillar architecture of the ECM has been reported to have a significant influence on cell behaviour and function. A new paradigm that pivots around the idea of incorporating biomechanical and biomolecular cues into the design of biomaterials and systems for biomedical applications has emerged in recent years. Indeed, current trends in materials science address the development of innovative biomaterials that include the dynamics, biochemistry and structural features of the native ECM. In this context, one of the most actively studied biomaterials for tissue engineering and regenerative medicine applications are nanofiber-based scaffolds. Herein we provide a broad overview of the current status, challenges, manufacturing methods and applications of nanofibers based on elastin-based materials. Starting from an introduction to elastin as an inspiring fibrous protein, as well as to the natural and synthetic elastin-based biomaterials employed to meet the challenge of developing ECM-mimicking nanofibrous-based scaffolds, this review will follow with a description of the leading strategies currently employed in nanofibrous systems production, which in the case of elastin-based materials are mainly focused on supramolecular self-assembly mechanisms and the use of advanced manufacturing technologies. Thus, we will explore the tendency of elastin-based materials to form intrinsic fibers, and the self-assembly mechanisms involved. We will describe the function and self-assembly mechanisms of silk-like motifs, antimicrobial peptides and leucine zippers when incorporated into the backbone of the elastin-based biomaterial. Advanced polymer-processing technologies, such as electrospinning and additive manufacturing, as well as their specific features, will be presented and reviewed for the specific case of elastin-based nanofiber manufacture. Finally, we will present our perspectives and outlook on the current challenges facing the development of nanofibrous ECM-mimicking scaffolds based on elastin and elastin-like biomaterials, as well as future trends in nanofabrication and applications.

Peptide grafting strategies before and after electrospinning of nanofibers

Nanofiber films produced by electrospinning currently provide a promising platform for different applications. Although nonfunctionalized nanofiber films from natural or synthetic polymers are extensively used, electrospun materials combined with peptides are gaining more interest. In fact, the selection of specific peptides improves the performance of the material for biological applications and mainly for tissue engineering, mostly by maintaining similar mechanical properties with respect to the simple polymer. The main drawback in using peptides blended with a polymer is the quick release of the peptides. To avoid this problem, covalent linking of the peptide is more beneficial. Here, we reviewed synthetic protocols that enable covalent grafting of peptides to polymers before or after the electrospinning procedures to obtain more robust electrospun materials. Applications and the performance of the new material compared to that of the starting polymer are discussed.

Synthesis and characterization of electrospun nanofibrous tissue engineering scaffolds generated from in situ polymerization of ionomeric polyurethane composites

Tissue scaffolds need to be engineered to be cell compatible, have timely biodegradable character, be functional with respect to providing niche cell support for tissue repair and regeneration, readily accommodate multiple cell types, and have mechanical properties that enable the simulation of the native tissue. In this study, electrospun degradable polar hydrophobic ionic polyurethane (D-PHI) scaffolds were generated in order to yield an extracellular matrix-like structure for tissue engineering applications. D-PHI oligomers were synthesized, blended with a degradable linear polycarbonate polyurethane (PCNU), and electrospun with simultaneous in situ UV cross-linking in order to generate aligned nanofibrous scaffolds in the form of elastomeric composite materials. The D-PHI/PCNU scaffold fibre morphology, cross-linking efficiency, surface nature, mechanical properties, in vivo degradation and integration, as well as in vitro cell compatibility were characterized. The results showed that D-PHI/PCNU scaffolds had a high cross-linking efficiency, stronger polar nature, and lower stiffness relative to PCNU scaffolds. In vivo, the D-PHI/PCNU scaffold degraded relatively slowly, thereby enabling new tissue time to form and yielding very good integration with the latter tissue. Based on a study with A10 vascular smooth muscle cells, the D-PHI/PCNU scaffold was able to support high cell viability, adhesion, and expression of typical smooth muscle cell markers after a 7-day culture period, which was comparable to PCNU scaffolds. These characterization results demonstrate that the unique properties of a D-PHI/PCNU scaffold, combined with the benefits of electrospinning, could allow for the generation of a tissue engineered scaffold that mimics important aspects of the native extracellular matrix and could be used for functional tissue regeneration. STATEMENT OF SIGNIFICANCE: Tissue engineered scaffolds should recapitulate native extracellular matrix features. This study investigates the processing of a classical polycarbonate polyurethane (PCNU) with a cross-linked and degradable ionomeric polyurethane (D-PHI), polymerized via in situ rapid light curing to yield a 3-dimensional co-electrospun nanofibre matrix with chemical diversity and low modulus character. This research advances the use of D-PHI for tissue engineering applications by providing a facile means of changing physical and chemical properties in classical PCNUs without the need to adjust spinning viscosities of the base polymer. Further, the in vivo and cell culture findings set the stage for introducing unique elastic materials which inherently support wound healing, repair, and regeneration in tissues, for applications that require the recapitulation of native extracellular matrix physical features.

Biomimetic cardiovascular platforms for in vitro disease modeling and therapeutic validation

Bioengineered tissues have become increasingly more sophisticated owing to recent advancements in the fields of biomaterials, microfabrication, microfluidics, genetic engineering, and stem cell and developmental biology. In the coming years, the ability to engineer artificial constructs that accurately mimic the compositional, architectural, and functional properties of human tissues, will profoundly impact the therapeutic and diagnostic aspects of the healthcare industry. In this regard, bioengineered cardiac tissues are of particular importance due to the extremely limited ability of the myocardium to self-regenerate, as well as the remarkably high mortality associated with cardiovascular diseases worldwide. As novel microphysiological systems make the transition from bench to bedside, their implementation in high throughput drug screening, personalized diagnostics, disease modeling, and targeted therapy validation will bring forth a paradigm shift in the clinical management of cardiovascular diseases. Here, we will review the current state of the art in experimental in vitro platforms for next generation diagnostics and therapy validation. We will describe recent advancements in the development of smart biomaterials, biofabrication techniques, and stem cell engineering, aimed at recapitulating cardiovascular function at the tissue- and organ levels. In addition, integrative and multidisciplinary approaches to engineer biomimetic cardiovascular constructs with unprecedented human and clinical relevance will be discussed. We will comment on the implementation of these platforms in high throughput drug screening, in vitro disease modeling and therapy validation. Lastly, future perspectives will be provided on how these biomimetic platforms will aid in the transition towards patient centered diagnostics, and the development of personalized targeted therapeutics.

Electrospun polyurethane nanofiber scaffolds with ciprofloxacin oligomer versus free ciprofloxacin: Effect on drug release and cell attachment

An electrospun degradable polycarbonate urethane (PCNU) nanofiber scaffold loaded with antibiotic was investigated in terms of antibacterial efficacy and cell compatibility for potential use in gingival tissue engineering. Antimicrobial oligomer (AO), a compound which consists of two molecules of ciprofloxacin (CF) covalently bound via hydrolysable linkages to triethylene glycol (TEG), was incorporated via a one-step blend electrospinning process using a single solvent system at 7 and 15% w/w equivalent CF with respect to the PCNU. The oligomeric form of the drug was used to overcome the challenge of drug aggregation and burst release when antibiotics are incorporated as free drug. Electrospinning parameters were optimized to obtain scaffolds with similar alignment and fiber diameter to non-drug loaded fibers. AO that diffused from the fibers was hydrolysed to release CF slowly and in a linear manner over the duration of the study, whereas scaffolds with CF at the same concentration but in free form showed a burst release within 1h with no further release throughout the study duration. Human gingival fibroblast (HGF) adhesion and spreading was dependent on the concentration and form the CF was loaded (AO vs. free CF), which was attributed in part to differences in scaffold surface chemistry. Surface segregation of AO was quantified using surface-resolved X-ray photoelectron spectroscopy (XPS). These findings are encouraging and support further investigation for the use of AO as a means of attenuating the rapid release of drug loaded into nanofibers. The study also demonstrates through quantitative measures that drug additives have the potential to surface-locate without phase separating from the fibers, leading to fast dissolution and differential fibroblast cell attachment.

Fabrication of Aligned Nanofiber Polymer Yarn Networks for Anisotropic Soft Tissue Scaffolds

Nanofibrous scaffolds with defined architectures and anisotropic mechanical properties are attractive for many tissue engineering and regenerative medicine applications. Here, a novel electrospinning system is developed and implemented to fabricate continuous processable uniaxially aligned nanofiber yarns (UANY). UANY were processed into fibrous tissue scaffolds with defined anisotropic material properties using various textile-forming technologies, i.e., braiding, weaving, and knitting techniques. UANY braiding dramatically increased overall stiffness and strength compared to the same number of UANY unbraided. Human adipose derived stem cells (HADSC) cultured on UANY or woven and knitted 3D scaffolds aligned along local fiber direction and were >90% viable throughout 21 days. Importantly, UANY supported biochemical induction of HADSC differentiation toward smooth muscle and osteogenic lineages. Moreover, we integrated an anisotropic woven fiber mesh within a bioactive hydrogel to mimic the complex microstructure and mechanical behavior of valve tissues. Human aortic valve interstitial cells (HAVIC) and human aortic root smooth muscle cells (HASMC) were separately encapsulated within hydrogel/woven fabric composite scaffolds for generating scaffolds with anisotropic biomechanics and valve ECM like microenvironment for heart valve tissue engineering. UANY have great potential as building blocks for generating fiber-shaped tissues or tissue microstructures with complex architectures.

Electrospun tecophilic/gelatin nanofibers with potential for small diameter blood vessel tissue engineering

Tissue engineering techniques particularly using electrospun scaffolds have been intensively used in recent years for the development of small diameter vascular grafts. However, the development of a completely successful scaffold that fulfills multiple requirements to guarantee complete vascular regeneration remains challenging. In this study, a hydrophilic and compliant polyurethane namely Tecophilic (TP) blended with gelatin (gel) at a weight ratio of 70:30 (TP(70)/gel(30)) was electrospun to fabricate a tubular composite scaffold with biomechanical properties closely simulating those of native blood vessels. Hydrophilic properties of the composite scaffold induced non-thrombogenicity while the incorporation of gelatin molecules within the scaffold greatly improved the capacity of the scaffold to serve as an adhesive substrate for vascular smooth muscle cells (SMCs), in comparison to pure TP. Preservation of the contractile phenotype of SMCs seeded on electrospun TP(70)/gel(30) was yet another promising feature of this scaffold. The nanostructured TP(70)/gel(30) demonstrated potential feasibility toward functioning as a vascular graft.

Fabricated Elastin

The mechanical stability, elasticity, inherent bioactivity, and self-assembly properties of elastin make it a highly attractive candidate for the fabrication of versatile biomaterials. The ability to engineer specific peptide sequences derived from elastin allows the precise control of these physicochemical and organizational characteristics, and further broadens the diversity of elastin-based applications. Elastin and elastin-like peptides can also be modified or blended with other natural or synthetic moieties, including peptides, proteins, polysaccharides, and polymers, to augment existing capabilities or confer additional architectural and biofunctional features to compositionally pure materials. Elastin and elastin-based composites have been subjected to diverse fabrication processes, including heating, electrospinning, wet spinning, solvent casting, freeze-drying, and cross-linking, for the manufacture of particles, fibers, gels, tubes, sheets and films. The resulting materials can be tailored to possess specific strength, elasticity, morphology, topography, porosity, wettability, surface charge, and bioactivity. This extraordinary tunability of elastin-based constructs enables their use in a range of biomedical and tissue engineering applications such as targeted drug delivery, cell encapsulation, vascular repair, nerve regeneration, wound healing, and dermal, cartilage, bone, and dental replacement.

Recombinant Technology in the Development of Materials and Systems for Soft-Tissue Repair

The field of biomedicine is constantly investing significant research efforts in order to gain a more in-depth understanding of the mechanisms that govern the function of body compartments and to develop creative solutions for the repair and regeneration of damaged tissues. The main overall goal is to develop relatively simple systems that are able to mimic naturally occurring constructs and can therefore be used in regenerative medicine. Recombinant technology, which is widely used to obtain new tailored synthetic genes that express polymeric protein-based structures, now offers a broad range of advantages for that purpose by permitting the tuning of biological and mechanical properties depending on the intended application while simultaneously ensuring adequate biocompatibility and biodegradability of the scaffold formed by the polymers. This Progress Report is focused on recombinant protein-based materials that resemble naturally occurring proteins of interest for use in soft tissue repair. An overview of recombinant biomaterials derived from elastin, silk, collagen and resilin is given, along with a description of their characteristics and suggested applications. Current endeavors in this field are continuously providing more-improved materials in comparison with conventional ones. As such, a great effort is being made to put these materials through clinical trials in order to favor their future use.

Soluble elastin peptides in cardiovascular homeostasis: Foe or ally

Elastin peptides, also known as elastin-derived peptides or elastokines, are soluble polypeptides in blood and tissue. The blood levels of elastin peptides are usually low but can increase during cardiovascular diseases, such as atherosclerosis, aortic aneurysm and diabetes with vascular complications. Generally, elastin peptides are derived from the degradation of insoluble elastic polymers. The biological activities of elastin peptides are bidirectional, e.g., a pro-inflammatory effect on monocyte migration induction vs. a protective effect on vasodilation promotion. However, recent in vivo studies have demonstrated that elastin peptides promote the formation of atherosclerotic plaques in hypercholesterolemic mice and induce hyperglycemia and elevations in plasma lipid levels in fasted mice. More important, the detrimental effects induced by elastin peptides can be largely inhibited by genetic or pharmacological blockade of the elastin receptor complex or by neutralization of an antibody against elastin peptides. These studies indicate new therapeutic strategies for the treatment of cardiovascular diseases by targeting elastin peptide metabolism. Therefore, the goal of this review is to summarize current knowledge about elastin peptides relevant to cardiovascular pathologies to further delineate their potential application in cardiovascular disease.

Surface modification and endothelialization of biomaterials as potential scaffolds for vascular tissue engineering applications

This review highlights the recent developments of surface modification and endothelialization of biomaterials in vascular tissue engineering applications.

Fabrication of polyurethane and polyurethane based composite fibres by the electrospinning technique for soft tissue engineering of cardiovascular system

Electrospinning is a unique technique, which provides forming of polymeric scaffolds for soft tissue engineering, which include tissue scaffolds for soft tissues of the cardiovascular system. Such artificial soft tissues of the cardiovascular system may possess mechanical properties comparable to native vascular tissues. Electrospinning technique gives the opportunity to form fibres with nm- to μm-scale in diameter. The arrangement of obtained fibres and their surface determine the biocompatibility of the scaffolds. Polyurethanes (PUs) are being commonly used as a prosthesis of cardiovascular soft tissues due to their excellent biocompatibility, non-toxicity, elasticity and mechanical properties. PUs also possess fine spinning properties. The combination of a variety of PU properties with an electrospinning technique, conducted at the well tailored conditions, gives unlimited possibilities of forming novel polyurethane materials suitable for soft tissue scaffolds applied in cardiovascular tissue engineering. This paper can help researches to gain more widespread and deeper understanding of designing electrospinable PU materials, which may be used as cardiovascular soft tissue scaffolds. In this paper we focus on reagents used in PU synthesis designed to increase PU biocompatibility (polyols) and biodegradability (isocyanates). We also describe suggested surface modifications of electrospun PUs, and the direct influence of surface wettability on providing enhanced biocompatibility of scaffolds. We indicate a great influence of electrospinning parameters (voltage, flow rate, working distance) and used solvents (mostly DMF, THF and HFIP) on fibre alignment and diameter - what impacts the biocompatibility and hemocompatibility of such electrospun PU scaffolds. Moreover, we present PU modifications with natural polymers with novel approach applied in electrospinning of PU scaffolds. This work may contribute with further developing of novel electrospun PUs, which may be applied as soft tissue scaffolds of the cardiovascular system.

Phenotypic modulation of smooth muscle cells by chemical and mechanical cues of electrospun tecophilic/gelatin nanofibers

The ability of mature smooth muscle cells (SMCs) to modulate their phenotype in response to environmental cues is a critical issue related to vascular diseases. A tissue engineered vascular graft shall promote the contractile phenotype of vascular SMCs. To this aim, Tecophilic/gelatin (TP/gel) was electrospun at different weight ratios of TP/gelatin (100:0, 70:30, 50:50, 30:70), leading to differences in biochemical and mechanical properties of the nanofibers which in turn influenced the phenotype of SMCs. Results indicated that both the substrate with higher ligand density and lower stiffness could enhance SMC contractility and reduce cell proliferation. However, observing the highest SMCs contractility on electrospun TP(70)/gel(30) among the composite scaffolds demonstrated stiffness as the most critical parameter. Due to conflicting effects of softness versus minor fraction of gelatin (reduced ligand density) within TP(70)/gel(30) fibers, a relatively high proliferation of SMCs was still observed on TP(70)/gel(30) scaffold. The surface of TP(70)/gel(30) scaffold was further modified through physical adsorption of gelatin molecules so as to increase the ligand density on its surface, whereby a functional vascular construct that promotes the contractile behavior of SMCs with low cell proliferation was developed.

NANO AND MICRO-STRUCTURES OF ELASTIN-LIKE POLYPEPTIDE-BASED MATERIALS AND THEIR APPLICATIONS: RECENT DEVELOPMENTS

Elastin-like polypeptide (ELP) containing materials have spurred significant research interest for biomedical applications exploiting their biocompatible, biodegradable and nonimmunogenic nature while maintaining precise control over their chemical structure and functionality through genetic engineering. Physical, mechanical and biological properties of ELPs could be further manipulated using genetic engineering or through conjugation with a variety of chemical moieties. These chemical and physical modifications also achieve interesting micro- and nanostructured ELP-based materials. Here, we review the recent developments during the past decade in the methods to engineer elastin-like materials, available genetic and chemical modification methods and applications of ELP micro and nanostructures in tissue engineering and drug delivery.

Elastin and collagen enhances electrospun aligned polyurethane as scaffolds for vascular graft

Mismatch in mechanical properties between synthetic vascular graft and arteries contribute to graft failure. The viscoelastic properties of arteries are conferred by elastin and collagen. In this study, the mechanical properties and cellular interactions of aligned nanofibrous polyurethane (PU) scaffolds blended with elastin, collagen or a mixture of both proteins were examined. Elastin softened PU to a peak stress and strain of 7.86 MPa and 112.28 % respectively, which are similar to those observed in blood vessels. Collagen-blended PU increased in peak stress to 28.14 MPa. The growth of smooth muscle cells (SMCs) on both collagen-blended and elastin/collagen-blended scaffold increased by 283 and 224 % respectively when compared to PU. Smooth muscle myosin staining indicated that the cells are contractile SMCs which are favored in vascular tissue engineering. Elastin and collagen are beneficial for creating compliant synthetic vascular grafts as elastin provided the necessary viscoelastic properties while collagen enhanced the cellular interactions.