Characterization of chemoselective surface attachment of the cationic peptide melimine and its effects on antimicrobial activity

Peptide-based self-assembled monolayers (SAMs): what peptides can do for SAMs and vice versa

Self-assembled monolayers (SAMs) represent highly ordered molecular materials with versatile biochemical features and multidisciplinary applications. Research on SAMs has made much progress since the early begginings of Au substrates and alkanethiols, and numerous examples of peptide-displaying SAMs can be found in the literature. Peptides, presenting increasing structural complexity, stimuli-responsiveness, and biological relevance, represent versatile functional components in SAMs-based platforms. This review examines the major findings and progress made on the use of peptide building blocks displayed as part of SAMs with specific functions, such as selective cell adhesion, migration and differentiation, biomolecular binding, advanced biosensing, molecular electronics, antimicrobial, osteointegrative and antifouling surfaces, among others. Peptide selection and design, functionalisation strategies, as well as structural and functional characteristics from selected examples are discussed. Additionally, advanced fabrication methods for dynamic peptide spatiotemporal presentation are presented, as well as a number of characterisation techniques. All together, these features and approaches enable the preparation and use of increasingly complex peptide-based SAMs to mimic and study biological processes, and provide convergent platforms for high throughput screening discovery and validation of promising therapeutics and technologies.

Flexible and Biocompatible Antifouling Polyurethane Surfaces Incorporating Tethered Antimicrobial Peptides through Click Reactions

Efficient, simple antibacterial materials to combat implant-associated infections are much in demand. Herein, the development of polyurethanes, both cross-linked thermoset and flexible and versatile thermoplastic, suitable for "click on demand" attachment of antibacterial compounds enabled via incorporation of an alkyne-containing diol monomer in the polymer backbone, is described. By employing different polyolic polytetrahydrofurans, isocyanates, and chain extenders, a robust and flexible material comparable to commercial thermoplastic polyurethane is prepared. A series of short synthetic antimicrobial peptides are designed, synthesized, and covalently attached in a single coupling step to generate a homogenous coating. The lead material is shown to be biocompatible and does not display any toxicity against either mouse fibroblasts or reconstructed human epidermis according to ISO and OECD guidelines. The repelling performance of the peptide-coated materials is illustrated against colonization and biofilm formation by Staphylococcus aureus and Staphylococcus epidermidis on coated plastic films and finally, on coated commercial central venous catheters employing LIVE/DEAD staining, confocal laser scanning microscopy, and bacterial counts. This study presents the successful development of a versatile and scalable polyurethane with the potential for use in the medical field to reduce the impact of bacterial biofilms.

Influence of Immobilization Strategies on the Antibacterial Properties of Antimicrobial Peptide-Chitosan Coatings

It is key to fight bacterial adhesion to prevent biofilm establishment on biomaterials. Surface immobilization of antimicrobial peptides (AMP) is a promising strategy to avoid bacterial colonization. This work aimed to investigate whether the direct surface immobilization of Dhvar5, an AMP with head-to-tail amphipathicity, would improve the antimicrobial activity of chitosan ultrathin coatings. The peptide was grafted by copper-catalyzed azide-alkyne cycloaddition (CuAAC) chemistry by either its C- or N- terminus to assess the influence of peptide orientation on surface properties and antimicrobial activity. These features were compared with those of coatings fabricated using previously described Dhvar5-chitosan conjugates (immobilized in bulk). The peptide was chemoselectively immobilized onto the coating by both termini. Moreover, the covalent immobilization of Dhvar5 by either terminus enhanced the antimicrobial effect of the chitosan coating by decreasing colonization by both Gram-positive (Staphylococcus aureus, Staphylococcus epidermidis) and Gram-negative (Escherichia coli, Pseudomonas aeruginosa) bacteria. Relevantly, the antimicrobial performance of the surface on Gram-positive bacteria depended on how Dhvar5-chitosan coatings were produced. An antiadhesive effect was observed when the peptide was grafted onto prefabricated chitosan coatings (film), and a bactericidal effect was exhibited when coatings were prepared from Dhvar5-chitosan conjugates (bulk). This antiadhesive effect was not due to changes in surface wettability or protein adsorption but rather depended on variations in peptide concentration, exposure, and surface roughness. Results reported in this study show that the antibacterial potency and effect of immobilized AMP vary greatly with the immobilization procedure. Overall, independently of the fabrication protocol and mechanism of action, Dhvar5-chitosan coatings are a promising strategy for the development of antimicrobial medical devices, either as an antiadhesive or contact-killing surface.

Antiviral Peptides in Antimicrobial Surface Coatings—From Current Techniques to Potential Applications

The transmission of pathogens through contact with contaminated surfaces is an important route for the spread of infections. The recent outbreak of COVID-19 highlights the necessity to attenuate surface-mediated transmission. Currently, the disinfection and sanitization of surfaces are commonly performed in this regard. However, there are some disadvantages associated with these practices, including the development of antibiotic resistance, viral mutation, etc.; hence, a better strategy is necessary. In recent years, peptides have been studied to be utilized as a potential alternative. They are part of the host immune defense and have many potential in vivo applications in drug delivery, diagnostics, immunomodulation, etc. Additionally, the ability of peptides to interact with different molecules and membrane surfaces of microorganisms has made it possible to exploit them in ex vivo applications such as antimicrobial (antibacterial and antiviral) coatings. Although antibacterial peptide coatings have been studied extensively and proven to be effective, antiviral coatings are a more recent development. Therefore, this study aims to highlight antiviral coating strategies and the current practices and application of antiviral coating materials in personal protective equipment, healthcare devices, and textiles and surfaces in public settings. Here, we have presented a review on potential techniques to incorporate peptides in current surface coating strategies that will serve as a guide for developing cost-effective, sustainable and coherent antiviral surface coatings. We further our discussion to highlight some challenges of using peptides as a surface coating material and to examine future perspectives.

Melimine-Modified 3D-Printed Polycaprolactone Scaffolds for the Prevention of Biofilm-Related Biomaterial Infections

Biomaterial-associated infections are one of the major causes of implant failure. These infections result from persistent bacteria that have adhered to the biomaterial surface before, during, or after surgery and have formed a biofilm on the implant's surface. It is estimated that 4 to 10% of implant surfaces are contaminated with bacteria; however, the infection rate can be as high as 30% in intensive care units in developed countries and as high as 45% in developing countries. To date, there is no clinical solution to prevent implant infection without relying on the use of high doses of antibiotics supplied systemically and/or removal of the infected device. In this study, melimine, a chimeric cationic peptide that has been tested in Phase I and II human clinical trials, was immobilized onto the surface of 3D-printed medical-grade polycaprolactone (mPCL) scaffolds via covalent binding and adsorption. X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) spectra of melimine-treated surfaces confirmed immobilization of the peptide, as well as its homogeneous distribution throughout the scaffold surface. Amino acid analysis showed that melimine covalent and noncovalent immobilization resulted in a peptide density of ∼156 and ∼533 ng/cm², respectively. Furthermore, we demonstrated that the immobilization of melimine on mPCL scaffolds by 1-ethyl-3-[3-(dimethylamino)propyl] carbodiimide hydrochloride (EDC) coupling and noncovalent interactions resulted in a reduction of Staphylococcus aureus colonization by 78.7% and 76.0%, respectively, in comparison with the nonmodified control specimens. Particularly, the modified surfaces maintained their antibacterial properties for 3 days, which resulted in the inhibition of biofilm formation in vitro. This system offers a biomaterial strategy to effectively prevent biofilm-related infections on implant surfaces without relying on the use of prophylactic antibiotic treatment.

Functionalized Self-Assembled Monolayers: Versatile Strategies to Combat Bacterial Biofilm Formation

Bacterial infections due to biofilms account for up to 80% of bacterial infections in humans. With the increased use of antibiotic treatments, indwelling medical devices, disinfectants, and longer hospital stays, antibiotic resistant infections are sharply increasing. Annual deaths are predicted to outpace cancer and diabetes combined by 2050. In the past two decades, both chemical and physical strategies have arisen to combat biofilm formation on surfaces. One such promising chemical strategy is the formation of a self-assembled monolayer (SAM), due to its small layer thickness, strong covalent bonds, typically facile synthesis, and versatility. With the goal of combating biofilm formation, the SAM could be used to tether an antibacterial agent such as a small-molecule antibiotic, nanoparticle, peptide, or polymer to the surface, and limit the agent’s release into its environment. This review focuses on the use of SAMs to inhibit biofilm formation, both on their own and by covalent grafting of a biocidal agent, with the potential to be used in indwelling medical devices. We conclude with our perspectives on ongoing challenges and future directions for this field.

Titanium Surface Modification for Implantable Medical Devices with Anti-Bacterial Adhesion Properties

Pure titanium and titanium alloys are widely used in dentistry and orthopedics. However, despite their outstanding mechanical and biological properties, implant failure mainly due to post-operative infection still remains a significant concern. The possibility to develop inherent antibacterial medical devices was here investigated by covalently inserting bioactive ammonium salts onto the surface of titanium metal substrates. Titanium discs have been functionalized with quaternary ammonium salts (QASs) and with oleic acid (OA), affording the Ti-AEMAC Ti-GTMAC, Ti-AUTEAB, and Ti-OA samples, which were characterized by ATR-FTIR and SEM-EDX analyses and investigated for the roughness and hydrophilic behavior. The chemical modifications were shown to deeply affect the surface properties of the metal substrates and, as a consequence, their bio-interaction. The bacterial adhesion tests against the Gram-negative Escherichia Coli and Gram-positive Staphylococcus aureus, at 1.5 and 24 h of bacterial contact, showed good anti-adhesion activity for Ti-AUTEAB and Ti-OA samples, containing a long alkyl chain between the silicon atom and the ammonium functionality. In particular, the Ti-AUTEAB sample showed inhibition of bacteria adhesion against Escherichia Coli of about one log with respect to the other samples, after 1.5 h. The results of this study highlight the importance of chemical functionalization in addressing the antimicrobial activity of metal surfaces and could open new perspectives in the development of inherent antibacterial medical devices.

Recent developments in antimicrobial and antifouling coatings to reduce or prevent contamination and cross-contamination of food contact surfaces by bacteria

Illness as the result of ingesting bacterially contaminated foodstuffs represents a significant annual loss of human quality of life and economic impact globally. Significant research investment has recently been made in developing new materials that can be used to construct food contacting tools and surfaces that might minimize the risk of cross-contamination of bacteria from one food item to another. This is done to mitigate the spread of bacterial contamination and resultant foodborne illness. Internet-based literature search tools such as Web of Science, Google Scholar, and Scopus were utilized to investigate publishing trends within the last 10 years related to the development of antimicrobial and antifouling surfaces with potential use in food processing applications. Technologies investigated were categorized into four major groups: antimicrobial agent-releasing coatings, contact-based antimicrobial coatings, superhydrophobic antifouling coatings, and repulsion-based antifouling coatings. The advantages for each group and technical challenges remaining before wide-scale implementation were compared. A diverse array of emerging antimicrobial and antifouling technologies were identified, designed to suit a wide range of food contact applications. Although each poses distinct and promising advantages, significant further research investment will likely be required to reliably produce effective materials economically and safely enough to equip large-scale operations such as farms, food processing facilities, and kitchens.

Efficient Prevention of Marine Biofilm Formation Employing a Surface-Grafted Repellent Marine Peptide

Creation of surfaces resistant to the formation of microbial biofilms via biomimicry has been heralded as a promising strategy to protect a range of different materials ranging from boat hulls to medical devices and surgical instruments. In our current study, we describe the successful transfer of a highly effective natural marine biofilm inhibitor to the 2D surface format. A series of cyclic peptides inspired by the natural equinatoxin II protein produced by Beadlet anemone (Actinia equine) have been evaluated for their ability to inhibit the formation of a mixed marine microbial consortium on polyamide reverse osmosis membranes. In solution, the peptides are shown to effectively inhibit settlement and biofilm formation in a nontoxic manner down to 1 nM concentrations. In addition, our study also illustrates how the peptides can be applied to disperse already established biofilms. Attachment of a hydrophobic palmitic acid tail generates a peptide suited for strong noncovalent surface interactions and allows the generation of stable noncovalent coatings. These adsorbed peptides remain attached to the surface at significant shear stress and also remain active, effectively preventing the biofilm formation over 24 h. Finally, the covalent attachment of the peptides to an acrylate surface was also evaluated and the prepared coatings display a remarkable ability to prevent surface colonization at surface loadings of 55 ng/cm² over 48 h. The ability to retain the nontoxic antibiofilm activity, documented in solution, in the covalent 2D-format is unprecedented, and this natural peptide motif displays high potential in several material application areas.

Membrane perturbation, altered morphology and killing of Staphylococcus epidermidis upon contact with a cytocompatible peptide-based antibacterial surface

One possibility to prevent prosthetic infections is to produce biomaterials resistant to bacterial colonization by anchoring membrane active antimicrobial peptides (AMPs) onto the implant surface. In this perspective, a deeper understanding of the mode of action of the immobilized peptides should improve the development of AMP-inspired infection-resistant biomaterials. The aim of the present study was to characterize the bactericidal mechanism against Staphylococcus epidermidis of the AMP BMAP27(1-18), immobilized on titanium disks and on a model resin support, by applying viability counts, Field Emission Scanning Electron Microscopy (FE-SEM), and a fluorescence microplate assay with a membrane potential-sensitive dye. The cytocompatibility to osteoblast-like MG-63 cells was investigated in monoculture and in co-culture with bacteria. The impact of peptide orientation was explored by using N- and C- anchored analogues. On titanium, the ∼50 % drop in bacteria viability and dramatically affected morphology indicate a contact-killing action exerted by the N- and C-immobilized peptides to the same extent. As further shown by the fluorescence assay with the resin-anchored peptides, the bactericidal effect was mediated by rapid membrane perturbation, similar to free peptides. However, at peptide MBC resin equivalents the C-oriented analogue proved more effective with more than 99 % killing and maximum fluorescence increase, compared to half-maximum fluorescence with more than 90 % killing produced by the N-orientation. Confocal microscopy analyses revealed 4-5 times better MG-63 cell adhesion on peptide-functionalized titanium both in monoculture and in co-culture with bacteria, regardless of peptide orientation, thus stimulating further studies on the effects of the immobilized BMAP27(1-18) on osteoblast cells.

Antimicrobial resistance of ocular microbes and the role of antimicrobial peptides

Isolation of antimicrobial-resistant microbes from ocular infections may be becoming more frequent. Infections caused by these microbes can be difficult to treat and lead to poor outcomes. However, new therapies are being developed which may help improve clinical outcomes. This review examines recent reports on the isolation of antibiotic-resistant microbes from ocular infections. In addition, an overview of the development of some new antibiotic therapies is given. The recent literature regarding antibiotic use and resistance, isolation of antibiotic-resistant microbes from ocular infections and the development of potential new antibiotics that can be used to treat these infections was reviewed. Ocular microbial infections are a global public health issue as they can result in vision loss which compromises quality of life. Approximately 70 per cent of ocular infections are caused by bacteria including Chlamydia trachomatis, Staphylococcus aureus, and Pseudomonas aeruginosa and fungi such as Candida albicans, Aspergillus spp. and Fusarium spp. Resistance to first-line antibiotics such as fluoroquinolones and azoles has increased, with resistance of S. aureus isolates from the USA to fluoroquinolones reaching 32 per cent of isolates and 35 per cent being methicillin-resistant (MRSA). Lower levels of MRSA (seven per cent) were isolated by an Australian study. Antimicrobial peptides, which are broad-spectrum alternatives to antibiotics, have been tested as possible new drugs. Several have shown promise in animal models of keratitis, especially treating P. aeruginosa, S. aureus or C. albicans infections. Reports of increasing resistance of ocular isolates to mainstay antibiotics are a concern, and there is evidence that for ocular surface disease this resistance translates into worse clinical outcomes. New antibiotics are being developed, but not by large pharmaceutical companies and mostly in university research laboratories and smaller biotech companies. Antimicrobial peptides show promise in treating keratitis.

Smart Titanium Coating Composed of Antibiotic Conjugated Peptides as an Infection-Responsive Antibacterial Agent

Antibacterial coating is rapidly emerging as a pivotal strategy for mitigating spread of bacterial pathogens. However, many challenges still need to be overcome in order to develop a smart coating that can achieve on-demand antibacterial effects. In this study, a Staphylococcus aureus (S. aureus) sensitive peptide sequence is designed, and an antibiotic is then conjugated with this tailor-made peptide. The antibiotic-peptide conjugate is then linked to the surface of a titanium implant, where the peptide can be recognized and cleaved by an enzyme secreted by S. aureus. This allows for the release of antibiotics in the presence of S. aureus, thus achieving delivery of an antibacterial specifically when an infection occurs.

Biophysical approaches for exploring lipopeptide-lipid interactions

In recent years, lipopeptides (LPs) have attracted a lot of attention in the pharmaceutical industry due to their broad-spectrum of antimicrobial activity against a variety of pathogens and their unique mode of action. This class of compounds has enormous potential for application as an alternative to conventional antibiotics and for pest control. Understanding how LPs work from a structural and biophysical standpoint through investigating their interaction with cell membranes is crucial for the rational design of these biomolecules. Various analytical techniques have been developed for studying intramolecular interactions with high resolution. However, these tools have been barely exploited in lipopeptide-lipid interactions studies. These biophysical approaches would give precise insight on these interactions. Here, we reviewed these state-of-the-art analytical techniques. Knowledge at this level is indispensable for understanding LPs activity and particularly their potential specificity, which is relevant information for safe application. Additionally, the principle of each analytical technique is presented and the information acquired is discussed. The key challenges, such as the selection of the membrane model are also been briefly reviewed.

•

A brief overview of topics to understand the generalities of lipopeptide (LP) science.

•

Main analytical techniques used to reveal the interaction and the distorting effect of LP on artificial membranes.

•

Guidelines for selecting of the most adequate membrane models for the given analytical technique.

The Development of an Antimicrobial Contact Lens - From the Laboratory to the Clinic

Contact lens wear is generally safe and provides excellent vision. However, contact lens wear is often associated with the risk of developing ocular surface infection and inflammation, and in severe cases, the infection can result in loss of vision. Antimicrobial peptide-coated contact lenses have been made to help reduce the incidence of infection and inflammation. This paper reviews the research progress from conception, through the laboratory and preclinical tests to the latest information on clinical testing of an antimicrobial contact lens. We provide insights into the pathways followed and pitfalls that have been encountered. The journey has not always been linear or smooth, but has resulted in some of the first published clinical testing of antimicrobial peptide-coated contact lenses in humans. We hope this may help lead to the development and commercialisation of antimicrobial contact lenses in the future.

The Role of Orientation of Surface Bound Dihydropyrrol-2-ones (DHP) on Biological Activity

Quorum sensing (QS) signaling system is important for bacterial growth, adhesion, and biofilm formation resulting in numerous infectious diseases. Dihydropyrrol-2-ones (DHPs) represent a novel class of antimicrobial agents that inhibit QS, and are less prone to develop bacterial resistance due to their non-growth inhibition mechanism of action which does not cause survival pressure on bacteria. DHPs can prevent bacterial colonization and quorum sensing when covalently bound to substrates. In this study, the role of orientation of DHP compounds was investigated after covalent attachment by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC)/N-hydroxysuccinimide (NHS) coupling reaction to amine-functionalized glass surfaces via various positions of the DHP scaffold. The functionalized glass surfaces were characterized by X-ray photoelectron spectroscopy (XPS) and contact angle measurements and tested for their in vitro biological activity against S. aureus and P. aeruginosa. DHPs attached via the N-1 position resulted in the highest antibacterial activities against S. aureus, while no difference was observed for DHPs attached either via the N-1 position or the C-4 phenyl ring against P. aeruginosa.

Antimicrobial coatings prepared from Dhvar-5-click-grafted chitosan powders

Antimicrobial peptides (AMP) are powerful components of the innate immune system, as they display wide activity spectrum and low tendency to induce pathogen resistance. Hence, the development of AMP-based coatings is a very promising strategy to prevent biomaterials-associated infections. This work aims to investigate if Dhvar-5-chitosan conjugates, previously synthesized by us via azide-alkyne "click" reaction, can be applied as antimicrobial coatings. Ultrathin coatings were prepared by spin coater after dissolving Dhvar-5-chitosan conjugate powder in aqueous acetic acid. Peptide orientation and exposure from the surface was confirmed by ellipsometry and contact angle measurements. Bactericidal activity was evaluated against Staphylococcus epidermidis, Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa, the most prevalent pathogens in implant-associated infections. Results showed that Dhvar-5-chitosan coatings displayed bactericidal effect. Moreover, since Dhvar-5 has head-to-tail amphipathicity, it was clear that the bactericidal potency was dependent on which domain of the peptide (cationic or hydrophobic) was exposed. In this context, Dhvar-5 immobilized through its C-terminus (exposing its hydrophobic end) presented higher antimicrobial activity against Gram-positive bacteria and reduced adhesion of Gram-negative bacteria. This orientation-dependent antimicrobial activity was further corroborated by the anti-biofilm assay, as covalent immobilization of Dhvar-5 through its C-terminus provided anti-biofilm properties to the chitosan thin film. Immobilization of Dhvar-5 showed no cytotoxic effect against HFF-1 cells, as both metabolic activity and cell morphology were similar to control. In conclusion, Dhvar-5-chitosan coatings are promising antimicrobial surfaces without cytotoxic effects against human cells. STATEMENT OF SIGNIFICANCE: AMP-tethering onto ground biomaterial is still a poorly explored strategy in research. In this work, AMP-tethered ground chitosan is used to produce highly antibacterial ultrathin films. Powdered AMP-tethered chitosan appears as an alternative solution for antimicrobial devices production, as it is suitable for large scale production, being easier to handle for fabrication of different coatings and materials with antimicrobial properties and without inducing toxicity.

Lipid Membrane Interactions of the Cationic Antimicrobial Peptide Chimeras Melimine and Cys-Melimine

Melimine and its derivatives are synthetic chimeric antimicrobial agents based on protamine and melittin. The binding of solubilized melimine and its derivative, with a cysteine on N-terminus, (cys-melimine) on tethered bilayer lipid membranes (tBLMs) was examined using ac electrical impedance spectroscopy. The addition of melimine and cys-melimine initially increased membrane conduction, which subsequently falls over time. The results were obtained for tBLMs comprising zwitterionic phosphatidylcholine, anionic phosphatidylglycerol, or tBLMs made using purified lipids from Escherichia coli. The effect on conduction is more marked with the cysteine variant than the noncysteine variant. The variation in membrane conduction most probably arises from individual melimines inducing increased ionic permeability, which is then reduced as the melimines aggregate and phase-separate within the membrane. The actions of these antimicrobials are modeled in terms of altering the critical packing parameter (CPP) of the membranes. The variations in the peptide length of cys-melimine were compared with a truncated version of the peptide, cys-mel4. The results suggest that the smaller molecule impacts the membrane by a mechanism that increases the average CPP, reducing membrane conduction. Alternatively, an uncharged alanine-replacement version of melimine still produced an increase in membrane conduction, further supporting the CPP model of geometry-induced toroidal pore alterations. All the data were then compared to their antimicrobial effectiveness for the Gram-positive and Gram-negative strains of bacteria, and their fusogenic properties were examined using dynamic light scattering in 1-oleoyl-2-hydroxy- sn-glycero-3-phosphocholine lipid spheroids. We conclude that a degree of correlation exists between the antimicrobial effectiveness of the peptides studied here and their modulation of membrane conductivity.

Alginate based antimicrobial hydrogels formed by integrating Diels-Alder "click chemistry" and the thiol-ene reaction

In recent years medical devices manufacturers have been looking for antimicrobial coatings which are biocompatible and non-toxic for a wide range of medical devices. The demand for these antimicrobial coatings has increased significantly, owing to the increased incidence of hospital-associated infections (HAIs). Hydrogels have been widely used in biomedical applications due to their hydrophilicity, biodegradability, non-toxicity and biocompatibility. In this work, sodium alginate (SA) based antibacterial hydrogels SA/PEG-HHC10 were designed and prepared by combining Diels-Alder (DA) click chemistry and the thiol-ene reaction. The hydrogels were first prepared using DA click chemistry with good mechanical strength, then the cysteine-terminated antimicrobial peptide HHC10-CYS (HHC10) was grafted into the hydrogel by the thiol-ene reaction between the oxy-norbornene group and the thiol group. The results showed that the antimicrobial hydrogels had a strong antibacterial property and good biocompatibility. Therefore, the antimicrobial hydrogels have significant potential application as coatings for implantable medical devices.

Electric fields control the orientation of peptides irreversibly immobilized on radical-functionalized surfaces

Surface functionalization of an implantable device with bioactive molecules can overcome adverse biological responses by promoting specific local tissue integration. Bioactive peptides have advantages over larger protein molecules due to their robustness and sterilizability. Their relatively small size presents opportunities to control the peptide orientation on approach to a surface to achieve favourable presentation of bioactive motifs. Here we demonstrate control of the orientation of surface-bound peptides by tuning electric fields at the surface during immobilization. Guided by computational simulations, a peptide with a linear conformation in solution is designed. Electric fields are used to control the peptide approach towards a radical-functionalized surface. Spontaneous, irreversible immobilization is achieved when the peptide makes contact with the surface. Our findings show that control of both peptide orientation and surface concentration is achieved simply by varying the solution pH or by applying an electric field as delivered by a small battery.

Interactions between Surface-Immobilized Antimicrobial Peptides and Model Bacterial Cell Membranes

Sum frequency generation (SFG) vibrational spectroscopy was used to study surface immobilization effects on the interactions between antimicrobial peptide cecropin P1 (CP1) and model cell membranes. While free CP1 in solution interacted with a model cell membrane composed of a phosphatidylglycerol (PG) bilayer, electrostatic interaction led to the attachment of CP1 molecules onto the PG surface and the hydrophobic domain in the lipid bilayer enabled the peptides to insert into the bilayer and form α-helices from random coil structures. While CP1 molecules immobilized on a self-assembled monolayer interacted with PG lipid vesicles, the intensity of the SFG peak for the peptide α-helix decreased as the PG vesicle concentration increased. It was believed that when surface-immobilized CP1 molecules interacted with lipid vesicles, they lay down on the surface or became random coils. When the immobilized CP1 interacted with a PG lipid monolayer on water, the strong interaction led to the lying-down orientation of all of the surface-immobilized peptides as well. Differently, no significant interactions between surface-immobilized CP1 with the mammalian cell membrane model 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine bilayer were observed. Our results suggest that, instead of membrane insertion, the electrostatic interactions between the surface cationic charges of CP1 and anionic bacterial membranes may play an important role in the antimicrobial activity of the surface-immobilized CP1 peptide.

Site-specific grafting on titanium surfaces with hybrid temporin antibacterial peptides

Controlled orientation of silylated hybrid-temporins on titanium surfaces improved antibacterial activity.

Antibacterial activity and cytocompatibility of an implant coating consisting of TiO2 nanotubes combined with a GL13K antimicrobial peptide

Prevention of implant-associated infections at an early stage of surgery is highly desirable for the long-term efficacy of implants in dentistry and orthopedics. Infection prophylaxis using conventional antibiotics is becoming less effective due to the development of bacteria resistant to multiple antibiotics. An ideal strategy to conquer bacterial infections is the local delivery of antibacterial agents. Therefore, antimicrobial peptide (AMP) eluting coatings on implant surfaces is a promising alternative. In this study, the feasibility of utilizing TiO₂ nanotubes (TNTs), processed using anodization, as carriers to deliver a candidate AMP on titanium surfaces for the prevention of implant-associated infections is assessed. The broad-spectrum GL13K (GKIIKLKASLKLL-CONH2) AMP derived from human parotid secretory protein was selected and immobilized to TNTs using a simple soaking technique. Field emission scanning electron microscope, X-ray diffraction, Fourier transform infrared spectroscopy, and liquid chromatography–mass spectrometry analyses confirmed the successful immobilization of GL13K to anatase TNTs. The drug-loaded coatings demonstrated a sustained and slow drug release profile in vitro and eradicated the growth of Fusobacterium nucleatum and Porphyromonas gingivalis within 5 days of culture, as assessed by disk-diffusion assay. The GL13K-immobilized TNT (GL13K-TNT) coating demonstrated greater biocompatibility, compared with a coating produced by incubating TNTs with equimolar concentrations of metronidazole. GL13K-TNTs produced no observable cytotoxicity to preosteoblastic cells (MC3T3-E1). The coating may also have an immune regulatory effect, in support of rapid osseointegration around implants. Therefore, the combination of TNTs and AMP GL13K may achieve simultaneous antimicrobial and osteoconductive activities.

Rationally designed dual functional block copolymers for bottlebrush-like coatings: In vitro and in vivo antimicrobial, antibiofilm, and antifouling properties

Numerous antimicrobial coatings have been developed for biomedical devices/implants, but few can simultaneously fulfill the requirements for antimicrobial and antifouling ability and biocompatibility. In this study, to develop an antimicrobial and antibiofilm surface coating, diblock amphiphilic molecules with antimicrobial and antifouling segments in a single chain were rationally designed and synthesized. Cationic antimicrobial polypeptides (AMP) were first synthesized by N-carboxyanhydride ring-opening polymerization (NCA-ROP). Heterofunctionalized poly(ethylene glycol) with different lengths (methacrylate-PEG_n-tosyl, n=10/45/90) was synthesized and site-specifically conjugated with polypeptides to form diblock amphiphiles. Along with increased PEG chain length, hemolytic activity was considerably improved, and broad-spectrum antimicrobial activity is retained. Three MA-PEG_n-b-AMP copolymers were further grafted onto the surface of silicone rubber (a commonly used catheter material) via plasma/UV-induced surface polymerizations to form a bottlebrush-like coating with excellent antimicrobial activity against several pathogenic bacteria (Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus), and effectively prevent biofilm formation. This bottlebrush coating also greatly reduced protein adsorption and platelet adhesion, indicating its excellent antifouling ability. An in vitro cytotoxicity study also demonstrated that this coating is biocompatible with mammalian cells. After subcutaneous implantation of the materials in rats, we demonstrated that the g-PEG₄₅-b-AMP bottlebrush coating exhibits significant anti-infective activity in vivo. Thus, this facilely synthesized PEGylated AMP bottlebrush coating is a feasible method to prevent biomedical devices-associated infections.

STATEMENT OF SIGNIFICANCE

Current antimicrobial coatings are often associated with concerns such as antibiotic resistance, environmental pollution, short-time antimicrobial activity, biofouling, poor blood compatibility and cytotoxicity, etc. To overcome these drawbacks, a robust PEGylated cationic amphiphilic peptides-based bottlebrush-like surface coating is demonstrated here, which fulfil the requirements of antimicrobial and antifouling as well as biocompatibility in the meantime. Briefly, the rational designed g-PEG_n-b-AMP block copolymers (n=10/45/90) were synthesized and grafted on silicone surface. This bottlebrush-like coating efficiently kill the contacted bacteria and prevent the biofilm formation, greatly reduced protein and platelet adhesion. It also exhibits excellent blood compatibility and low cytotoxicity in vitro. In particular, g-PEG₄₅-b-AMP coating exhibits significant anti-infection effect in vivo. This coating offering an effective strategy for combating biomedical devices-associated infections.

Adding Functions to Biomaterial Surfaces through Protein Incorporation

The concept of biomaterials has evolved from one of inert mechanical supports with a long-term, biologically inactive role in the body into complex matrices that exhibit selective cell binding, promote proliferation and matrix production, and may ultimately become replaced by newly generated tissues in vivo. Functionalization of material surfaces with biomolecules is critical to their ability to evade immunorecognition, interact productively with surrounding tissues and extracellular matrix, and avoid bacterial colonization. Antibody molecules and their derived fragments are commonly immobilized on materials to mediate coating with specific cell types in fields such as stent endothelialization and drug delivery. The incorporation of growth factors into biomaterials has found application in promoting and accelerating bone formation in osteogenerative and related applications. Peptides and extracellular matrix proteins can impart biomolecule- and cell-specificities to materials while antimicrobial peptides have found roles in preventing biofilm formation on devices and implants. In this progress report, we detail developments in the use of diverse proteins and peptides to modify the surfaces of hard biomaterials in vivo and in vitro. Chemical approaches to immobilizing active biomolecules are presented, as well as platform technologies for isolation or generation of natural or synthetic molecules suitable for biomaterial functionalization.

Antimicrobial peptide melimine coating for titanium and its in vivo antibacterial activity in rodent subcutaneous infection models

Implant-associated infections represent a significant health problem and financial burden on healthcare systems. Current strategies for the treatment or prevention of such infections are still inadequate and new strategies are needed in this era of antibiotic resistance. Melimine, a synthetic antimicrobial peptide with broad spectrum activity against bacteria, fungi and protozoa, has been shown to be a promising candidate for development as antimicrobial coating for biomedical devices and implants. In this study, the in vitro and in vivo antimicrobial activity of melimine-coated titanium was tested. The titanium surface was amine-functionalised with 3-aminopropyltriethoxysilane (APTES) followed by reaction with a bifunctional linker 4-(N-maleimidomethyl)cyclohexane-1-carboxylic 3-sulfo-n-hydroxysuccinimide ester (Sulfo-SMCC) to yield a maleimide functionalised surface. Melimine was then tethered to the surface via a thioether linkage through a Michael addition reaction of the cysteine at its N-terminus with the maleimide moiety. Melimine coating significantly reduced in vitro adhesion and biofilm formation of Pseudomonas aeruginosa by up to 62% and Staphylococcus aureus by up to 84% on the titanium substrates compared to the blank (p < 0.05). The activity was maintained after ethylene oxide gas sterilisation. The coating was also challenged in both mouse and rat subcutaneous infection models and was able to reduce the bacterial load by up to 2 log10 compared to the uncoated surface (p < 0.05). Melimine coating is a promising candidate for development as a surface antimicrobial that can withstand industrial sterilisation while showing good biocompatibility.

Preparation of bioactive and antimicrobial PLGA membranes by magainin II/EGF functionalization

Development of dual functional materials that are capable of both reducing bacterial interaction and encouraging host tissue integration has gained importance in design of biomaterials. In this study, we prepared a bilayer poly (lactide co-glycolide) fibrous membrane with antibacterial and bioactive properties by electrospinning. The antibacterial layer was produced by covalent immobilization of antimicrobial peptide, Magainin II. The bioactive layer incorporating epidermal growth factor (EGF) molecules was subsequently electrospun on the antibacterial layer. The membranes were characterized by X-ray photoelectron spectroscopy, scanning electron microscopy and fluorescence microscopy. EGF release was detected by enzyme-linked immunosorbent assay. The antibacterial activity was tested against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The ability to support tissue cell integration was detected by using L-929 mouse fibroblasts. The dual functional membranes established enhanced antibacterial properties and increased tissue cell compatibility. This combined approach suggests a promising strategy for wound dressings, vascular grafts and dental membranes as well as catheters and fixation devices.

Conjugation Approach To Produce a Staphylococcus aureus Synbody with Activity in Serum

Synbodies show promise as a new class of synthetic antibiotics. Here, we explore improvements in their activity and production through conjugation chemistry. Maleimide conjugation is a widely used conjugation strategy due to its high yield, selectivity, and low cost. We used this strategy to conjugate two antibacterial peptides to produce a bivalent antibacterial peptide, called a synbody that has bactericidal activity against methicillin resistant Staphylococcus aureus (MRSA). The synbody was prepared by conjugation of a partially d-amino acid substituted synthetic antibacterial peptide to a bis-maleimide scaffold. The synbody slowly degrades in serum, but also undergoes exchange reactions with other serum proteins, such as albumin. Therefore, we hydrolyzed the thiosuccinimide ring using a mild hydrolysis protocol to produce a new synbody with similar bactericidal activity. The synbody was now resistant to exchange reactions and maintained bactericidal activity in serum for 2 h. This work demonstrates that low-cost maleimide coupling can be used to produce antibacterial peptide conjugates with activity in serum.

Antimicrobial coatings with dual cationic and N-halamine character: characterization and biocidal efficacy

A method to prepare an antimicrobial coating for food-handling materials is reported. Alternating layers of branched polyethylenimine and styrene maleic anhydride copolymer were applied onto the surface of polypropylene. The resulting coatings had low surface energy and presented enhanced antimicrobial character due to the presence of both cationic and N-halamine forming structures. In its unchlorinated form, the coating inactivated Listeria monocytogenes by ∼3 logarithmic cycles. In the form of N-halamines >5 logarithmic cycles were reached. Microbial inactivation kinetics showed a Weibullian behavior when the coating was unchlorinated and a sigmoidal behavior when chlorinated. Microscopy confirmed that the reduction in the microbial load was due to biocidal effects of the coating and not bacterial adhesion onto the modified surface. The modified surface was able to be repeatedly rechlorinated. Such rechargeable antimicrobial coatings may support improving food safety by reducing cross-contamination of microorganisms from food-processing equipment.

Antibacterial coatings on titanium surfaces: a comparison study between in vitro single-species and multispecies biofilm

Dental plaque is a biofilm that causes dental caries, gingivitis, and periodontitis. Most of the studies in antibacterial coatings have been conducted by in vitro single-species biofilm formation, but oral biofilm involves more than 700 different bacterial species that are able to interact. Therefore, new studies are focused on in vitro multispecies biofilm models that mimic in vivo biofilms. The aim of the present work was to study different antibacterial coatings onto titanium surfaces and evaluate the in vitro antimicrobial properties of the surfaces on two different bacterial species and an oral biofilm. The lactate dehydrogenase assay determined that treated samples did not affect fibroblast viability. In addition, the viability of microorganisms on modified samples was evaluated by a LIVE/DEAD BacLight bacterial viability kit. Although a decrease in viable bacteria onto treated samples was obtained, the results showed differences in effectiveness when single-biofilm and oral plaque were tested. It confirms, as we expected, the distinct sensitivities that bacterial strains have. Thus, this multispecies biofilms model holds a great potential to assess antibacterial properties onto samples for dental purposes.

Dhvar5 antimicrobial peptide (AMP) chemoselective covalent immobilization results on higher antiadherence effect than simple physical adsorption

Bacterial colonization and subsequent biofilm formation is still one of the major problems associated with medical devices. Antimicrobial peptides (AMP) immobilization onto biomaterials surface is a promising strategy to avoid bacterial colonization. However, a correct peptide orientation and exposure from the surface is essential to maintain AMP antimicrobial activity. This work aims to evaluate the effect of the immobilization on antibacterial activity of Dhvar5 (LLLFLLKKRKKRKY), an AMP with a head-to-tail amphipathicity. Dhvar5 was linked to thin chitosan coatings in i) a controlled orientation and exposure, testing covalent immobilization of its N- or C-terminus and using spacers with different lengths and flexibilities or in ii) a random orientation by physical adsorption. Chitosan coating was chosen due to its antimicrobial properties and readiness to be functionalized. Surface characterization demonstrated the chemoselective immobilization of the peptide with different spacers in a similar concentration (∼2 ng/cm2). Efficacy assays demonstrated that covalent immobilization of Dhvar5 exposing its cationic end, improves the chitosan coating antimicrobial effect by decreasing Methicillin-resistant Staphylococcus aureus (MRSA) colonization. This effect was enhanced when longer spacers were used independently of their flexibility. In opposite, immobilized Dhvar5 exposing its hydrophobic end has no effect on bacterial adhesion to chitosan, and when adsorbed in a random orientation even induces bacterial adhesion to chitosan coating.

Antibacterial activity on electrospun poly(lactide-co-glycolide) based membranes via Magainin II grafting

An antimicrobial peptide (AMP), Magainin II (Mag II) was covalently immobilized on poly(lactide-co-glycolide) (PLGA) and PLGA/gelatin electrospun fibrous membranes. The surface immobilization was characterized by X-ray Photoelectron Spectroscopy (XPS). Scanning Electron Microscopy (SEM) and Atomic Force Microscopy studies showed that the surface morphology of the fibers at micron scale was not affected by the immobilization process. The antibacterial activity of the bound Mag II was tested against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. Bacterial adhesion tests, SEM and confocal analyses revealed that the attachment and survival of bacteria were inhibited on Mag II functionalized membranes. AMP immobilization strategy was introduced as a new perspective for the modulation of antibacterial properties on PLGA based materials prepared by electrospinning.

Covalent immobilization of hLf1-11 peptide on a titanium surface reduces bacterial adhesion and biofilm formation

Bacterial infection represents a major cause of implant failure in dentistry. A common approach to overcoming this issue and treating peri-implant infection consists in the use of antibiotics. However, the rise of multidrug-resistant bacteria poses serious concerns to this strategy. A promising alternative is the use of antimicrobial peptides due to their broad-spectrum activity against bacteria and reduced bacterial resistance responses. The aim of the present study was to determine the in vitro antibacterial activity of the human lactoferrin-derived peptide hLf1-11 anchored to titanium surfaces. To this end, titanium samples were functionalized with the hLf1-11 peptide either by silanization methods or physical adsorption. X-ray photoelectron spectroscopy analyses confirmed the successful covalent attachment of the hLf1-11 peptide onto titanium surfaces. Lactate dehydrogenase assay determined that hLf1-11 peptide did not affect fibroblast viability. An outstanding reduction in the adhesion and early stages of biofilm formation of Streptococcus sanguinis and Lactobacillus salivarius was observed on the biofunctionalized surfaces compared to control non-treated samples. Furthermore, samples coated with the hLf1-11 peptide inhibited the early stages of bacterial growth. Thus, this strategy holds great potential to develop antimicrobial biomaterials for dental applications.

Quorum sensing inhibitory activities of surface immobilized antibacterial dihydropyrrolones via click chemistry

Device-related infection remains a major barrier to the use of biomaterial implants as life-saving devices. This study aims to examine the effectiveness and mechanism of action of surface attached dihydropyrrolones (DHPs), a quorum sensing (QS) inhibitor, against bacterial colonization. DHPs were covalently attached on glass surfaces via copper-catalyzed azide-alkyne 1,3-dipolar cycloaddition (CuAAC) click reaction. The covalent attachment of DHP surfaces was confirmed by X-ray photoelectron spectroscopy (XPS) and contact angle measurements, and the antimicrobial efficacy of the DHP coatings was assessed by confocal laser scanning microscopy (CLSM) and image analysis. The results demonstrated that covalently bound DHP compounds are effective in reducing the adhesion by up to 97% (p < 0.05) for both Pseudomonas aeruginosa and Staphylococcus aureus. Furthermore, using the green fluorescent protein (Gfp)-based reporter technology, it is demonstrated that surface attached DHPs were able to repress the expression of a lasB-gfp reporter fusion of P. aeruginosa by 72% (p < 0.001) without affecting cell viability. This demonstrates the ability of the covalently bound QS inhibitor to inhibit QS and suggests the existence of a membrane-based pathway(s) for QS inhibition. Hence, strategies based on incorporation of QS inhibitors such as DHPs represent a potential approach for prevention of device-related infections.

Bio-inspired stable antimicrobial peptide coatings for dental applications

We developed a novel titanium coating that has applications for preventing infection-related implant failures in dentistry and orthopedics. The coating incorporates an antimicrobial peptide, GL13K, derived from parotid secretory protein, which has been previously shown to be bactericidal and bacteriostatic in solution. We characterized the resulting physicochemical properties, resistance to degradation, activity against Porphyromonas gingivalis and in vitro cytocompatibility. Porphyromonas gingivalis is a pathogen associated with dental peri-implantitis, an inflammatory response to bacteria resulting in bone loss and implant failure. Our surface modifications obtained a homogeneous, highly hydrophobic and strongly anchored GL13K coating that was resistant to mechanical, thermochemical and enzymatic degradation. The GL13K coatings had a bactericidal effect and thus significantly reduced the number of viable bacteria compared to control surfaces. Finally, adequate proliferation of osteoblasts and human gingival fibroblasts demonstrated the GL13K coating's cytocompatibility. The robustness, antimicrobial activity and cytocompatibility of GL13K-biofunctionalized titanium make it a promising candidate for sustained inhibition of bacterial biofilm growth. This surface chemistry provides a basis for development of multifunctional bioactive surfaces to reduce patient morbidities and improve long-term clinical efficacy of metallic dental and orthopedic implants.