1
|
Naguib G, Mously H, Magdy W, Binmahfooz A, Qutub O, Hajjaj M, Hamed MT. Color behavior of composite resin enhanced with different shapes of new antimicrobial polymer coated nanoparticles. BMC Oral Health 2023; 23:771. [PMID: 37858112 PMCID: PMC10588037 DOI: 10.1186/s12903-023-03495-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/25/2023] [Accepted: 10/05/2023] [Indexed: 10/21/2023] Open
Abstract
BACKGROUND Zein-coated magnesium oxide nanoparticles (zMgO NPs) demonstrate a potent antimicrobial effect, endorsing it as a compelling additive to dental materials formulations for oral health care advances. However, currently there is no data on the imprint of zMgO NPs on the color permanence of dental composites. The objective of this study is to evaluate the color stability of different types of composite enhanced with antimicrobial zein-coated magnesium oxide nanoparticles (zMgO NPs) of different shapes before and after thermocycling. METHODS Two hundred composite samples were divided into four groups: Gp1: Tetric N-Flow with zMgO nanowires, Gp2: Tetric N-Flow with zMgO nanospheres, Gp3: Tetric N-Ceram with zMgO nanowires; Gp4: Tetric N-Ceram with zMgO nanospheres. Each group was subdivided into 5 subgroups (n = 10) with concentrations of zMgO NPs 0%, 0.3%, 0.5%, 1% and 2%. The characterization of the modified composite containing the zMgO was done via X-ray Diffraction, Field Emission Scanning Electron Microscopy (FESEM), and Fourier Transform Infrared Spectroscopy (FTIR). Colorimetric evaluation was performed through spectrophotometry with a white background. Samples underwent color assessment using a spectrophotometer, followed by thermocycling, and then another color assessment. RESULTS FESEM analysis showed a uniform distribution of the zMgO nanoparticles in the composite and FTIR illustrated no change in the spectra. However, the XRD spectra exhibited an amorphous pattern in the composite enhanced with zMgO NPs. There was no compelling discrepancy in color variation ΔE among the different groups before and after thermocycling (p > 0.05). A statistically notable variation in ΔL was found amid the control and N-Flow and N-Ceram with 2% zMgO nanospheres before and after thermocycling respectively (p < 0.05). While after thermocycling, there was a statistically significant difference in Δa in N-Flow and N-Ceram wires amid the control and the different groups (p < 0.05). Additionally, after thermocycling there was a statistically significant difference in Δb in N-Flow and N-Ceram wires between the control and the different groups (p < 0.05). The Tukey test exhibited no variation among the groups with different zMgO concentrations (p > 0.05). CONCLUSION Enhancing N-Flow and N-Ceram composite with antimicrobial zMgO nanowires and nanospheres did not alter the total color stability of the materials before and after thermocycling.
Collapse
Affiliation(s)
- Ghada Naguib
- Department of Restorative Dentistry, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia
- Department of Oral Biology, Cairo University School of Dentistry, Cairo, Egypt
| | - Hisham Mously
- Department of Oral and Maxillofacial Prosthodontics, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia
| | - Walaa Magdy
- Department of Restorative Dentistry, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia
| | - Abdulelah Binmahfooz
- Department of Oral and Maxillofacial Prosthodontics, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia
| | - Osama Qutub
- Department of Oral and Maxillofacial Prosthodontics, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia
| | - Maher Hajjaj
- Department of Restorative Dentistry, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia
| | - Mohamed Tharwat Hamed
- Department of Oral and Maxillofacial Prosthodontics, Faculty of Dentistry, King Abdulaziz University, P.O Box 80209, 21589, Jeddah, Saudi Arabia.
- Department of Fixed Prosthodontics, Cairo University School of Dentistry, Cairo, Egypt.
| |
Collapse
|
2
|
Lisina S, Inam W, Huhtala M, Howaili F, Zhang H, Rosenholm JM. Nano Differential Scanning Fluorimetry as a Rapid Stability Assessment Tool in the Nanoformulation of Proteins. Pharmaceutics 2023; 15:pharmaceutics15051473. [PMID: 37242715 DOI: 10.3390/pharmaceutics15051473] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/22/2023] [Revised: 04/20/2023] [Accepted: 05/09/2023] [Indexed: 05/28/2023] Open
Abstract
The development and production of innovative protein-based therapeutics is a complex and challenging avenue. External conditions such as buffers, solvents, pH, salts, polymers, surfactants, and nanoparticles may affect the stability and integrity of proteins during formulation. In this study, poly (ethylene imine) (PEI) functionalized mesoporous silica nanoparticles (MSNs) were used as a carrier for the model protein bovine serum albumin (BSA). To protect the protein inside MSNs after loading, polymeric encapsulation with poly (sodium 4-styrenesulfonate) (NaPSS) was used to seal the pores. Nano differential scanning fluorimetry (NanoDSF) was used to assess protein thermal stability during the formulation process. The MSN-PEI carrier matrix or conditions used did not destabilize the protein during loading, but the coating polymer NaPSS was incompatible with the NanoDSF technique due to autofluorescence. Thus, another pH-responsive polymer, spermine-modified acetylated dextran (SpAcDEX), was applied as a second coating after NaPSS. It possessed low autofluorescence and was successfully evaluated with the NanoDSF method. Circular dichroism (CD) spectroscopy was used to determine protein integrity in the case of interfering polymers such as NaPSS. Despite this limitation, NanoDSF was found to be a feasible and rapid tool to monitor protein stability during all steps needed to create a viable nanocarrier system for protein delivery.
Collapse
Affiliation(s)
- Sofia Lisina
- Pharmaceutical Sciences Laboratory, Faculty of Science and Engineering, Åbo Akademi University, 20500 Turku, Finland
| | - Wali Inam
- Pharmaceutical Sciences Laboratory, Faculty of Science and Engineering, Åbo Akademi University, 20500 Turku, Finland
| | - Mikko Huhtala
- Structural Bioinformatics Laboratory, Faculty of Science and Engineering, Biochemistry, Åbo Akademi University, 20500 Turku, Finland
| | - Fadak Howaili
- Pharmaceutical Sciences Laboratory, Faculty of Science and Engineering, Åbo Akademi University, 20500 Turku, Finland
| | - Hongbo Zhang
- Pharmaceutical Sciences Laboratory, Faculty of Science and Engineering, Åbo Akademi University, 20500 Turku, Finland
| | - Jessica M Rosenholm
- Pharmaceutical Sciences Laboratory, Faculty of Science and Engineering, Åbo Akademi University, 20500 Turku, Finland
| |
Collapse
|
3
|
Wang X, Ma N, Feng L, Shen M, Zhou Y, Zhang X, Huang R, Zhou L, Ji S, Lou Y, Zhu Z. Fabrication of bFGF/polydopamine-loaded PEEK implants for improving soft tissue integration by upregulating Wnt/β-catenin signaling. Heliyon 2023; 9:e14800. [PMID: 37012909 PMCID: PMC10066536 DOI: 10.1016/j.heliyon.2023.e14800] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/12/2023] [Revised: 03/15/2023] [Accepted: 03/17/2023] [Indexed: 03/28/2023] Open
Abstract
The difficulties associated with polyetheretherketone (PEEK) implants and soft tissue integration for craniomaxillofacial bone repair have led to a series of complications that limit the clinical benefits. In this study, 3D printed multi-stage microporous PEEK implants coated with bFGF via polydopamine were fabricated to enhance PEEK implant-soft tissue integration. Multistage microporous PEEK scaffolds prepared by sulfonation of concentrated sulfuric acid were coated with polydopamine, and then used as templates for electrophoretic deposition of bFGF bioactive factors. Achieving polydopamine and bFGF sustained release, the composite PEEK scaffolds possessed good mechanical properties, hydrophilicity, protein adhesion properties. The in vitro results indicated that bFGF/polydopamine-loaded PEEK exhibited good biocompatibility to rabbit embryonic fibroblasts (REF) by promoting cell proliferation, adhesion, and migration. Ribonucleic acid sequencing (RNA-seq) revealed that bFGF/polydopamine-loaded PEEK implants significantly upregulated the expression of genes and proteins associated with soft tissue integration and activated Wnt/β-catenin signaling in biological processes, but related expression of genes and proteins was significantly downregulated when the Wnt/β-catenin signaling was inhibited. Furthermore, in vivo bFGF/polydopamine-loaded PEEK implants exhibited excellent performance in improving the growth and adhesion of the surrounding soft tissue. In summary, bFGF/polydopamine-loaded PEEK implants possess soft tissue integration properties by activating the Wnt/β-catenin signaling, which have a potential translational clinical application in the future.
Collapse
|
4
|
Shen M, Wang L, Feng L, Gao Y, Li S, Wu Y, Xu C, Pei G. bFGF-Loaded Mesoporous Silica Nanoparticles Promote Bone Regeneration Through the Wnt/β-Catenin Signalling Pathway. Int J Nanomedicine 2022; 17:2593-2608. [PMID: 35698561 PMCID: PMC9188412 DOI: 10.2147/ijn.s366926] [Citation(s) in RCA: 14] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/18/2022] [Accepted: 06/01/2022] [Indexed: 12/22/2022] Open
Abstract
Background Bone defects remain an unsolved clinical problem due to the lack of effective osteogenic induction protocols. Nanomaterials play an important role in bone defect repair by stimulating osteogenesis. However, constructing an effective bioactive nanomaterial remains a substantial challenge. Methods In this study, mesoporous silica nanoparticles (MSNs) were prepared and used as nanocarriers for basic fibroblast growth factor (bFGF). The characteristics and biological properties of the synthetic bFGF@MSNs were tested. The osteogenic effects of the particles on the behavior of MC3T3-E1 cells were investigated in vitro. In addition, the differentially expressed genes during induction of osteogenesis were analyzed by transcriptomic sequencing. Radiological and histological observations were carried out to determine bone regeneration capability in a distal femur defect model. Results Achieving bFGF sustained release, bFGF@MSNs had uniform spherical morphology and good biocompatibility. In vitro osteogenesis induction experiments showed that bFGF@MSNs exhibited excellent osteogenesis performance, with upregulation of osteogenesis-related genes (RUNX2, OCN, Osterix, ALP). Transcriptomic sequencing revealed that the Wnt/β-catenin signalling pathway could be activated in regulation of biological processes. In vivo, bone defect repair experiments showed enhanced bone regeneration, as indicated by radiological and histological analysis, after the application of bFGF@MSNs. Conclusion bFGF@MSNs can promote bone regeneration by activating the Wnt/β-catenin signalling pathway. These particles are expected to become a potential therapeutic bioactive material for clinical application in repairing bone defects in the future.
Collapse
Affiliation(s)
- Mingkui Shen
- School of Medicine, Southern University of Science and Technology, Shenzhen, 518055, People’s Republic of China
| | - Lulu Wang
- School of Medicine, Southern University of Science and Technology, Shenzhen, 518055, People’s Republic of China
| | - Li Feng
- School of Medicine, Southern University of Science and Technology, Shenzhen, 518055, People’s Republic of China
| | - Yi Gao
- School of Medicine, Southern University of Science and Technology, Shenzhen, 518055, People’s Republic of China
| | - Sijing Li
- School of Medicine, Southern University of Science and Technology, Shenzhen, 518055, People’s Republic of China
| | - Yulan Wu
- School of Medicine, Southern University of Science and Technology, Shenzhen, 518055, People’s Republic of China
| | - Chuangye Xu
- School of Medicine, Southern University of Science and Technology, Shenzhen, 518055, People’s Republic of China
- Correspondence: Chuangye Xu; Guoxian Pei, Email ;
| | - Guoxian Pei
- School of Medicine, Southern University of Science and Technology, Shenzhen, 518055, People’s Republic of China
| |
Collapse
|
5
|
Amin F, Rahman S, Khurshid Z, Zafar MS, Sefat F, Kumar N. Effect of Nanostructures on the Properties of Glass Ionomer Dental Restoratives/Cements: A Comprehensive Narrative Review. MATERIALS (BASEL, SWITZERLAND) 2021; 14:6260. [PMID: 34771787 PMCID: PMC8584882 DOI: 10.3390/ma14216260] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/08/2021] [Revised: 08/14/2021] [Accepted: 10/15/2021] [Indexed: 12/16/2022]
Abstract
Overall perspective of nanotechnology and reinforcement of dental biomaterials by nanoparticles has been reported in the literature. However, the literature regarding the reinforcement of dental biomaterials after incorporating various nanostructures is sparse. The present review addresses current developments of glass ionomer cements (GICs) after incorporating various metallic, polymeric, inorganic and carbon-based nanostructures. In addition, types, applications, and implications of various nanostructures incorporated in GICs are discussed. Most of the attempts by researchers are based on the laboratory-based studies; hence, it warrants long-term clinical trials to aid the development of suitable materials for the load bearing posterior dentition. Nevertheless, a few meaningful conclusions are drawn from this substantial piece of work; they are as follows: (1) most of the nanostructures are likely to enhance the mechanical strength of GICs; (2) certain nanostructures improve the antibacterial activity of GICs against the cariogenic bacteria; (3) clinical translation of these promising outcomes are completely missing, and (4) the nanostructured modified GICs could perform better than their conventional counterparts in the load bearing posterior dentition.
Collapse
Affiliation(s)
- Faiza Amin
- Science of Dental Materials Department, Dow Dental College, Dow University of Health Sciences, Karachi 74200, Pakistan;
| | - Sehrish Rahman
- Science of Dental Materials Department, Dr. Ishrat Ul Ebad Khan Institute of Oral Health Sciences, Dow University of Health Sciences, Karachi 74200, Pakistan; (S.R.); (N.K.)
| | - Zohaib Khurshid
- Department of Prosthodontics and Dental Implantology, College of Dentistry, King Faisal University, Al-Ahsa 31982, Saudi Arabia
| | - Muhammad Sohail Zafar
- Department of Restorative Dentistry, College of Dentistry, Taibah University, Al Madinah, Al Munawwarah 41311, Saudi Arabia;
- Department of Dental Materials, Islamic International Dental College, Riphah International University, Islamabad 44000, Pakistan
| | - Farshid Sefat
- Department of Biomedical and Electronics Engineering, School of Engineering, University of Bradford, Bradford BD7 1DP, UK;
| | - Naresh Kumar
- Science of Dental Materials Department, Dr. Ishrat Ul Ebad Khan Institute of Oral Health Sciences, Dow University of Health Sciences, Karachi 74200, Pakistan; (S.R.); (N.K.)
| |
Collapse
|
6
|
Siebert L, Luna-Cerón E, García-Rivera LE, Oh J, Jang J, Rosas-Gómez DA, Pérez-Gómez MD, Maschkowitz G, Fickenscher H, Oceguera-Cuevas D, Holguín-León CG, Byambaa B, Hussain MA, Enciso-Martinez E, Cho M, Lee Y, Sobahi N, Hasan A, Orgill DP, Mishra YK, Adelung R, Lee E, Shin SR. Light-controlled growth factors release on tetrapodal ZnO-incorporated 3D-printed hydrogels for developing smart wound scaffold. ADVANCED FUNCTIONAL MATERIALS 2021; 31:2007555. [PMID: 36213489 PMCID: PMC9536771 DOI: 10.1002/adfm.202007555] [Citation(s) in RCA: 55] [Impact Index Per Article: 18.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/03/2020] [Indexed: 05/27/2023]
Abstract
Advanced wound scaffolds that integrate active substances to treat chronic wounds have gained significant recent attention. While wound scaffolds and advanced functionalities have previously been incorporated into one medical device, the wirelessly triggered release of active substances has remained the focus of many research endeavors. To combine multiple functions including light-triggered activation, anti-septic, angiogenic, and moisturizing properties, we have developed a 3D printed hydrogel patch encapsulating vascular endothelial growth factor (VEGF) decorated with photoactive and antibacterial tetrapodal zinc oxide (t-ZnO) microparticles. To achieve the smart release of VEGF, t-ZnO was modified by chemical treatment and activated through UV/visible light exposure. This process would also make the surface rough and improve protein adhesion. The elastic modulus and degradation behavior of the composite hydrogels, which must match the wound healing process, were adjusted by changing t-ZnO concentrations. The t-ZnO-laden composite hydrogels can be printed with any desired micropattern to potentially create a modular elution of various growth factors. The VEGF decorated t-ZnO-laden hydrogel patches showed low cytotoxicity and improved angiogenic properties while maintaining antibacterial functions in vitro. In vivo tests showed promising results for the printed wound patches, with less immunogenicity and enhanced wound healing.
Collapse
Affiliation(s)
- Leonard Siebert
- Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Cambridge, MA 02139, USA
- Functional Nanomaterials, Institute for Materials Science, Faculty of Engineering, Kiel University, Kaiserstr. 2, D-24143, Kiel, Germany
| | - Eder Luna-Cerón
- Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Cambridge, MA 02139, USA
| | - Luis Enrique García-Rivera
- Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Cambridge, MA 02139, USA
| | - Junsung Oh
- Department of Nano-biomedical Science & BK21 PLUS NBM Global Research Center for Regenerative Medicine, Dankook University, Cheonan 31116, Republic of Korea
| | - JunHwee Jang
- Department of Nano-biomedical Science & BK21 PLUS NBM Global Research Center for Regenerative Medicine, Dankook University, Cheonan 31116, Republic of Korea
| | - Diego A Rosas-Gómez
- Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Cambridge, MA 02139, USA
| | - Mitzi D Pérez-Gómez
- Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Cambridge, MA 02139, USA
| | - Gregor Maschkowitz
- Institute for Infection Medicine, Kiel University and University Medical Center Schleswig-Holstein, Brunswiker Str. 4, D-24105 Kiel, Germany
| | - Helmut Fickenscher
- Institute for Infection Medicine, Kiel University and University Medical Center Schleswig-Holstein, Brunswiker Str. 4, D-24105 Kiel, Germany
| | - Daniela Oceguera-Cuevas
- Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Cambridge, MA 02139, USA
| | - Carmen G Holguín-León
- Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Cambridge, MA 02139, USA
| | | | - Mohammad A Hussain
- Department of Electrical and Computer Engineering, King Abdulaziz University, Jeddah 21569, Saudi Arabia
| | - Eduardo Enciso-Martinez
- Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Cambridge, MA 02139, USA
| | | | - Yuhan Lee
- Department of Anesthesiology, preoperative and pain medicine, Center for Nanomedicine, Brigham and Women's Hospital, Harvard Medical School, Boston, MA 02115, USA
| | - Nebras Sobahi
- Department of Electrical and Computer Engineering, King Abdulaziz University, Jeddah 21569, Saudi Arabia
| | - Anwarul Hasan
- Department of Mechanical and Industrial Engineering, College of Engineering, Qatar University, Doha, Qatar
- Biomedical Research Centre (BRC), Qatar University, Doha, Qatar
| | - Dennis P Orgill
- Division of Plastic Surgery, Department of Surgery, Brigham and Women's Hospital, Harvard Medical School, Boston, MA 02115, USA
| | - Yogendra K Mishra
- Mads Clausen Institute, NanoSYD, University of Southern Denmark, Alsion 2, 6400, Sønderborg, Denmark
- Functional Nanomaterials, Institute for Materials Science, Faculty of Engineering, Kiel University, Kaiserstr. 2, D-24143, Kiel, Germany
| | - Rainer Adelung
- Functional Nanomaterials, Institute for Materials Science, Faculty of Engineering, Kiel University, Kaiserstr. 2, D-24143, Kiel, Germany
| | - Eunjung Lee
- Department of Nano-biomedical Science & BK21 PLUS NBM Global Research Center for Regenerative Medicine, Dankook University, Cheonan 31116, Republic of Korea
| | - Su Ryon Shin
- Division of Engineering in Medicine, Department of Medicine, Brigham and Women's Hospital, Harvard Medical School, Cambridge, MA 02139, USA
| |
Collapse
|
7
|
Chen IH, Lee TM, Huang CL. Biopolymers Hybrid Particles Used in Dentistry. Gels 2021; 7:gels7010031. [PMID: 33809903 PMCID: PMC8005972 DOI: 10.3390/gels7010031] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/01/2021] [Revised: 03/17/2021] [Accepted: 03/19/2021] [Indexed: 12/11/2022] Open
Abstract
This literature review provides an overview of the fabrication and application of biopolymer hybrid particles in dentistry. A total of 95 articles have been included in this review. In the review paper, the common inorganic particles and biopolymers used in dentistry are discussed in general, and detailed examples of inorganic particles (i.e., hydroxyapatite, calcium phosphate, and bioactive glass) and biopolymers such as collagen, gelatin, and chitosan have been drawn from the scientific literature and practical work. Among the included studies, calcium phosphate including hydroxyapatite is the most widely applied for inorganic particles used in dentistry, but bioactive glass is more applicable and multifunctional than hydroxyapatite and is currently used in clinical practice. Today, biopolymer hybrid particles are receiving more attention as novel materials for several applications in dentistry, such as drug delivery systems, bone repair, and periodontal regeneration surgery. The literature published on the biopolymer gel-assisted synthesis of inorganic particles for dentistry is somewhat limited, and therefore, this article focuses on reviewing and discussing the biopolymer hybrid particles used in dentistry.
Collapse
Affiliation(s)
- I-Hao Chen
- School of Dentistry, Kaohsiung Medical University, Kaohsiung 807, Taiwan;
| | - Tzer-Min Lee
- Institute of Oral Medicine, College of Medicine, National Cheng Kung University, Tainan 701, Taiwan
- School of Dentistry, College of Medicine, National Cheng Kung University, Tainan 701, Taiwan
- Correspondence: (T.-M.L.); (C.-L.H.); Tel.: +886-6-275-7575 (ext. 5972) (T.-M.L.); +886-7-312-1101 (ext. 2245#12) (C.-L.H.)
| | - Chih-Ling Huang
- Center for Fundamental Science, Kaohsiung Medical University, Kaohsiung 807, Taiwan
- Correspondence: (T.-M.L.); (C.-L.H.); Tel.: +886-6-275-7575 (ext. 5972) (T.-M.L.); +886-7-312-1101 (ext. 2245#12) (C.-L.H.)
| |
Collapse
|
8
|
Production, characterization and application of nanocarriers made of polysaccharides, proteins, bio-polyesters and other biopolymers: A review. Int J Biol Macromol 2020; 165:3088-3105. [DOI: 10.1016/j.ijbiomac.2020.10.104] [Citation(s) in RCA: 38] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/09/2020] [Revised: 10/11/2020] [Accepted: 10/14/2020] [Indexed: 01/10/2023]
|
9
|
Kastania G, Campbell J, Mitford J, Volodkin D. Polyelectrolyte Multilayer Capsule (PEMC)-Based Scaffolds for Tissue Engineering. MICROMACHINES 2020; 11:E797. [PMID: 32842692 PMCID: PMC7570195 DOI: 10.3390/mi11090797] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/13/2020] [Revised: 08/20/2020] [Accepted: 08/21/2020] [Indexed: 12/22/2022]
Abstract
Tissue engineering (TE) is a highly multidisciplinary field that focuses on novel regenerative treatments and seeks to tackle problems relating to tissue growth both in vitro and in vivo. These issues currently involve the replacement and regeneration of defective tissues, as well as drug testing and other related bioapplications. The key approach in TE is to employ artificial structures (scaffolds) to support tissue development; these constructs should be capable of hosting, protecting and releasing bioactives that guide cellular behaviour. A straightforward approach to integrating bioactives into the scaffolds is discussed utilising polyelectrolyte multilayer capsules (PEMCs). Herein, this review illustrates the recent progress in the use of CaCO3 vaterite-templated PEMCs for the fabrication of functional scaffolds for TE applications, including bone TE as one of the main targets of PEMCs. Approaches for PEMC integration into scaffolds is addressed, taking into account the formulation, advantages, and disadvantages of such PEMCs, together with future perspectives of such architectures.
Collapse
Affiliation(s)
| | | | | | - Dmitry Volodkin
- School of Science and Technology, Department of Chemistry and Forensics, Nottingham Trent University, Clifton Lane, Nottingham NG11 8NS, UK; (G.K.); (J.C.); (J.M.)
| |
Collapse
|
10
|
Mandakhbayar N, El-Fiqi A, Lee JH, Kim HW. Evaluation of Strontium-Doped Nanobioactive Glass Cement for Dentin–Pulp Complex Regeneration Therapy. ACS Biomater Sci Eng 2019; 5:6117-6126. [DOI: 10.1021/acsbiomaterials.9b01018] [Citation(s) in RCA: 20] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
Affiliation(s)
- Nandin Mandakhbayar
- Department of Nanobiomedical Science and BK21 PLUS NBM Global Research Center for Regenerative Medicine, Dankook University, Cheonan 31116, South Korea
| | - Ahmed El-Fiqi
- Department of Nanobiomedical Science and BK21 PLUS NBM Global Research Center for Regenerative Medicine, Dankook University, Cheonan 31116, South Korea
- Glass Research Department, National Research Centre, Cairo 12622, Egypt
| | - Jung-Hwan Lee
- Department of Nanobiomedical Science and BK21 PLUS NBM Global Research Center for Regenerative Medicine, Dankook University, Cheonan 31116, South Korea
- Glass Research Department, National Research Centre, Cairo 12622, Egypt
- Department of Biomaterials Science, School of Dentistry, Dankook University, Cheonan 330-714, South Korea
| | - Hae-Won Kim
- Department of Nanobiomedical Science and BK21 PLUS NBM Global Research Center for Regenerative Medicine, Dankook University, Cheonan 31116, South Korea
- Department of Biomaterials Science, School of Dentistry, Dankook University, Cheonan 330-714, South Korea
- UCL Eastman-Korea Dental Medicine Innovation Centre, Dankook University, Cheonan 31116, Republic of Korea
| |
Collapse
|
11
|
Chen L, Zhou X, He C. Mesoporous silica nanoparticles for tissue-engineering applications. WILEY INTERDISCIPLINARY REVIEWS-NANOMEDICINE AND NANOBIOTECHNOLOGY 2019; 11:e1573. [PMID: 31294533 DOI: 10.1002/wnan.1573] [Citation(s) in RCA: 64] [Impact Index Per Article: 12.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/31/2019] [Revised: 06/18/2019] [Accepted: 06/19/2019] [Indexed: 12/29/2022]
Abstract
Mesoporous silica nanoparticles (MSNs) have been widely investigated as a nanocarrier for the delivery of various cargoes in nanomedicine. The application of MSNs in tissue engineering is a relatively newly emerged field that has gained much research interest. In this review, the recent advances in the tissue-engineering application of MSNs are summarized. The controlled synthesis of MSNs is delineated first in terms of tuning the morphology, pore size of MSNs, and its surface chemistry, as well as biodegradability. Then, the different roles of MSNs in tissue engineering are successively introduced, which mainly comprise the delivery of bioactive factors, the inherent bioactivity of MSNs, stem cells labelling, and the impacts of incorporated MSNs on scaffolds. Furthermore, the recent progress in the applications of MSNs for tissue engineering, particularly bone tissue engineering, is summarized in detail. Finally, the challenges or potential trends for the further applications of MSNs in tissue engineering are also discussed. This article is categorized under: Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Implantable Materials and Surgical Technologies > Nanomaterials and Implants.
Collapse
Affiliation(s)
- Liang Chen
- Key Laboratory of Science and Technology of Eco-Textiles, Ministry of Education, College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai, China
| | - Xiaojun Zhou
- Key Laboratory of Science and Technology of Eco-Textiles, Ministry of Education, College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai, China
| | - Chuanglong He
- Key Laboratory of Science and Technology of Eco-Textiles, Ministry of Education, College of Chemistry, Chemical Engineering and Biotechnology, Donghua University, Shanghai, China
| |
Collapse
|
12
|
Lim X, Potter M, Cui Z, Dye JF. Manufacture and characterisation of EmDerm-novel hierarchically structured bio-active scaffolds for tissue regeneration. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2018; 29:79. [PMID: 29872930 PMCID: PMC5988793 DOI: 10.1007/s10856-018-6060-6] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/12/2018] [Accepted: 04/13/2018] [Indexed: 05/27/2023]
Abstract
There are significant challenges for using emulsion templating as a method of manufacturing macro-porous protein scaffolds. Issues include protein denaturation by adsorption at hydrophobic interfaces, emulsion instability, oil droplet and surfactant removal after protein gelation, and compatible cross-linking methods. We investigated an oil-in-water macro-emulsion stabilised with a surfactant blend, as a template for manufacturing protein-based nano-structured bio-intelligent scaffolds (EmDerm) with tuneable micro-scale porosity for tissue regeneration. Prototype EmDerm scaffolds were made using either collagen, through thermal gelation, fibrin, through enzymatic coagulation or collagen-fibrin composite. Pore size was controlled via surfactant-to-oil phase ratio. Scaffolds were crosslink-stabilised with EDC/NHS for varying durations. Scaffold micro-architecture and porosity were characterised with SEM, and mechanical properties by tensiometry. Hydrolytic and proteolytic degradation profiles were quantified by mass decrease over time. Human dermal fibroblasts, endothelial cells and bone marrow derived mesenchymal stem cells were used to investigate cytotoxicity and cell proliferation within each scaffold. EmDerm scaffolds showed nano-scale based hierarchical structures, with mean pore diameters ranging from 40-100 microns. The Young's modulus range was 1.1-2.9 MPa, and ultimate tensile strength was 4-16 MPa. Degradation rate was related to cross-linking duration. Each EmDerm scaffold supported excellent cell ingress and proliferation compared to the reference materials Integra™ and Matriderm™. Emulsion templating is a novel rapid method of fabricating nano-structured fibrous protein scaffolds with micro-scale pore dimensions. These scaffolds hold promising clinical potential for regeneration of the dermis and other soft tissues, e.g., for burns or chronic wound therapies.
Collapse
Affiliation(s)
- Xuxin Lim
- Tissue Engineering Group, Institute of Biomedical Engineering, Department of Engineering Science, University of Oxford, ORCRB, Roosevelt Drive, Headington, Oxford, OX3 7DQ, UK
| | - Matthew Potter
- Department of Plastic Surgery, Oxford University Hospitals NHS Foundation Trust, West Wing, John Radcliffe Hospital, Headington, Oxford, OX9 9DU, UK
| | - Zhanfeng Cui
- Tissue Engineering Group, Institute of Biomedical Engineering, Department of Engineering Science, University of Oxford, ORCRB, Roosevelt Drive, Headington, Oxford, OX3 7DQ, UK
| | - Julian F Dye
- Tissue Engineering Group, Institute of Biomedical Engineering, Department of Engineering Science, University of Oxford, ORCRB, Roosevelt Drive, Headington, Oxford, OX3 7DQ, UK.
| |
Collapse
|
13
|
Hassanzadeh P, Atyabi F, Dinarvand R. Tissue engineering: Still facing a long way ahead. J Control Release 2018; 279:181-197. [DOI: 10.1016/j.jconrel.2018.04.024] [Citation(s) in RCA: 20] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/12/2018] [Revised: 04/09/2018] [Accepted: 04/11/2018] [Indexed: 02/07/2023]
|
14
|
Möller-Siegert J, Parmentier J, Laquerrière P, Ouadi A, Raisslé O, Jallot E, Nedelec JM, Vix-Guterl C, Anselme K. Physicochemical regulation of TGF and VEGF delivery from mesoporous calcium phosphate bone substitutes. Nanomedicine (Lond) 2017; 12:1835-1850. [DOI: 10.2217/nnm-2017-0158] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/15/2022] Open
Abstract
Aim: Determination of the physicochemical parameters governing growth factors (GFs) adsorption and release from mesoporous calcium phosphate ceramics. Materials & methods: Six mesoporous calcium phosphate ceramics prepared by soft and hard templating were loaded with two different physiological concentrations of TGF-β1 or VEGF165 and their in vitro kinetics of adsorption/release were studied. Results: This low GF loading promotes adsorption on the highest binding sites. The usually encountered detrimental burst release is thus considerably reduced for samples prepared by hard-templating method. Conclusion: Our findings highlight that the strong affinity of GFs with the ceramic surfaces, demonstrated by a slow GFs release, is enhanced by the large surface area, confinement into mesopores of ceramics and high difference of surface charge between ceramic surfaces and GFs.
Collapse
Affiliation(s)
- Janina Möller-Siegert
- Institut de Science des Matériaux de Mulhouse (IS2M), Université de Strasbourg, Université de Haute Alsace, UMR CNRS 7361, F-68057 Mulhouse, France
| | - Julien Parmentier
- Institut de Science des Matériaux de Mulhouse (IS2M), Université de Strasbourg, Université de Haute Alsace, UMR CNRS 7361, F-68057 Mulhouse, France
| | | | - Ali Ouadi
- Université de Strasbourg, CNRS, IPHC UMR 7178, F-67000 Strasbourg, France
| | - Olivier Raisslé
- Université Clermont Auvergne, CNRS, SIGMA Clermont, ICCF, F-63000 Clermont-Ferrand, France
| | - Edouard Jallot
- Université Clermont Auvergne, CNRS/IN2P3, Laboratoire de Physique de Clermont, F-63000 Clermont-Ferrand, France
| | - Jean-Marie Nedelec
- Université Clermont Auvergne, CNRS, SIGMA Clermont, ICCF, F-63000 Clermont-Ferrand, France
| | - Cathie Vix-Guterl
- Institut de Science des Matériaux de Mulhouse (IS2M), Université de Strasbourg, Université de Haute Alsace, UMR CNRS 7361, F-68057 Mulhouse, France
| | - Karine Anselme
- Institut de Science des Matériaux de Mulhouse (IS2M), Université de Strasbourg, Université de Haute Alsace, UMR CNRS 7361, F-68057 Mulhouse, France
| |
Collapse
|
15
|
Reinforcing nanomedicine using graphene family nanomaterials. J Control Release 2017; 255:218-230. [DOI: 10.1016/j.jconrel.2017.04.041] [Citation(s) in RCA: 40] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/22/2017] [Revised: 04/26/2017] [Accepted: 04/27/2017] [Indexed: 12/12/2022]
|
16
|
Elkassas D, Arafa A. The innovative applications of therapeutic nanostructures in dentistry. NANOMEDICINE-NANOTECHNOLOGY BIOLOGY AND MEDICINE 2017; 13:1543-1562. [PMID: 28232213 DOI: 10.1016/j.nano.2017.01.018] [Citation(s) in RCA: 38] [Impact Index Per Article: 5.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/03/2016] [Revised: 01/21/2017] [Accepted: 01/30/2017] [Indexed: 02/05/2023]
Abstract
Nanotechnology has paved multiple ways in preventing, reversing or restoring dental caries which is one of the major health care problems. Nanotechnology aided in processing variety of nanomaterials with innovative dental applications. Some showed antimicrobial effect helping in the preventive stage. Others have remineralizing potential intercepting early lesion progression as nanosized calcium phosphate, carbonate hydroxyapatite nanocrystals, nanoamorphous calcium phosphate and nanoparticulate bioactive glass particularly with provision of self-assembles protein that furnish essential role in biomimetic repair. The unique size of nanomaterials makes them fascinating carriers for dental products. Thus, it is recentlyclaimedthat fortifying the adhesives with nanomaterials that possess biological meritsdoes not only enhance the mechanical and physical properties of the adhesives, but also help to attain and maintain a durable adhesive joint and enhanced longevity. Accordingly, this review will focus on the current status and the future implications of nanotechnology in preventive and adhesive dentistry.
Collapse
Affiliation(s)
- Dina Elkassas
- Department of Operative Dentistry, Faculty of Oral and Dental Medicine, Misr International University, Egypt
| | - Abla Arafa
- Department of Pediatric Dentistry and Dental Public Health, Faculty of Oral and Dental Medicine, Misr International University, Egypt.
| |
Collapse
|
17
|
Jahan K, Tabrizian M. Composite biopolymers for bone regeneration enhancement in bony defects. Biomater Sci 2017; 4:25-39. [PMID: 26317131 DOI: 10.1039/c5bm00163c] [Citation(s) in RCA: 53] [Impact Index Per Article: 7.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/06/2023]
Abstract
For the past century, various biomaterials have been used in the treatment of bone defects and fractures. Their role as potential substitutes for human bone grafts increases as donors become scarce. Metals, ceramics and polymers are all materials that confer different advantages to bone scaffold development. For instance, biocompatibility is a highly desirable property for which naturally-derived polymers are renowned. While generally applied separately, the use of biomaterials, in particular natural polymers, is likely to change, as biomaterial research moves towards mixing different types of materials in order to maximize their individual strengths. This review focuses on osteoconductive biocomposite scaffolds which are constructed around natural polymers and their performance at the in vitro/in vivo stages and in clinical trials.
Collapse
Affiliation(s)
- K Jahan
- Faculty of Dentistry, McGill University, 3640 University Street, Montreal, QC H3A 2B2, Canada.
| | - M Tabrizian
- Faculty of Dentistry, McGill University, 3640 University Street, Montreal, QC H3A 2B2, Canada. and Biomedical Engineering, Duff Medical Building, Room 313, McGill, Montreal, H3A 2B4, Canada
| |
Collapse
|
18
|
Angiogenic Effects of Collagen/Mesoporous Nanoparticle Composite Scaffold Delivering VEGF 165. BIOMED RESEARCH INTERNATIONAL 2016; 2016:9676934. [PMID: 27689093 PMCID: PMC5027316 DOI: 10.1155/2016/9676934] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/31/2016] [Accepted: 08/07/2016] [Indexed: 01/08/2023]
Abstract
Vascularization is a key issue for the success of tissue engineering to repair damaged tissue. In this study, we report a composite scaffold delivering angiogenic factor for this purpose. Vascular endothelial growth factor (VEGF) was loaded on mesoporous silica nanoparticle (MSN), which was then incorporated within a type I collagen sponge, to produce collagen/MSN/VEGF (CMV) scaffold. The CMV composite scaffold could release VEGF sustainably over the test period of 28 days. The release of VEGF improved the cell proliferation. Moreover, the in vivo angiogenesis of the scaffold, as studied by the chick chorioallantoic membrane (CAM) model, showed that the VEGF-releasing scaffold induced significantly increased number of blood vessel complexes when compared with VEGF-free scaffold. The composite scaffold showed good biocompatibility, as examined in rat subcutaneous tissue. These results demonstrate that the CMV scaffold with VEGF-releasing capacity can be potentially used to stimulate angiogenesis and tissue repair.
Collapse
|
19
|
Diaz-Gomez L, Concheiro A, Alvarez-Lorenzo C, García-González CA. Growth factors delivery from hybrid PCL-starch scaffolds processed using supercritical fluid technology. Carbohydr Polym 2016; 142:282-92. [DOI: 10.1016/j.carbpol.2016.01.051] [Citation(s) in RCA: 29] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/29/2015] [Revised: 01/20/2016] [Accepted: 01/23/2016] [Indexed: 12/26/2022]
|
20
|
Rosenholm JM, Zhang J, Linden M, Sahlgren C. Mesoporous silica nanoparticles in tissue engineering – a perspective. Nanomedicine (Lond) 2016; 11:391-402. [DOI: 10.2217/nnm.15.212] [Citation(s) in RCA: 69] [Impact Index Per Article: 8.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023] Open
Abstract
In this review, we summarize the latest developments and give a perspective on future applications of mesoporous silica nanoparticles (MSNs) in regenerative medicine. MSNs constitute a flexible platform for controlled delivery of drugs and imaging agents in tissue engineering and stem cell therapy. We highlight the recent advances in applying MSNs for controlled drug delivery and stem cell tracking. We touch upon novel functions of MSNs in real time imaging of drug release and biological function, and as tools to control the chemical and mechanical environment of stem cells. We discuss the need for novel model systems for studying biofunctionality and biocompatibility of MSNs, and how the interdisciplinary activities within the field will advance biotechnology research.
Collapse
Affiliation(s)
- Jessica Maria Rosenholm
- Pharmaceutical Sciences Laboratory, Faculty of Science & Engineering, Åbo Akademi University, Tykistökatu 6A, FIN-20521, Turku, Finland
| | - Jixi Zhang
- Key Laboratory of Biorheological Science & Technology, Ministry of Education, College of Bioengineering, Chongqing University, No. 174 Shazheng Road, Chongqing 400044, China
| | - Mika Linden
- Inorganic Chemistry II, Ulm University, Albert-Einstein-Allee 11, D-89081 Ulm, Germany
| | - Cecilia Sahlgren
- Turku Centre for Biotechnology, University of Turku & Åbo Akademi University, FI-20520 Turku, Finland
- Department of Biomedical Engineering, Technical University of Eindhoven, 5613 DR Eindhoven, The Netherlands
| |
Collapse
|
21
|
Chu C, Deng J, Liu L, Cao Y, Wei X, Li J, Man Y. Nanoparticles combined with growth factors: recent progress and applications. RSC Adv 2016. [DOI: 10.1039/c6ra13636b] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/05/2023] Open
Abstract
Increasing attention has been focused on the applications of nanoparticles combined with growth factors (NPs/GFs) due to the substantial functions of GFs in regenerative medicine and disease treatments.
Collapse
Affiliation(s)
- Chenyu Chu
- State Key Laboratory of Oral Diseases
- West China Hospital of Stomatology
- Sichuan University
- Chengdu 610041
- China
| | - Jia Deng
- State Key Laboratory of Oral Diseases
- West China Hospital of Stomatology
- Sichuan University
- Chengdu 610041
- China
| | - Li Liu
- State Key Laboratory of Biotherapy and Laboratory for Aging Research
- West China Hospital
- Sichuan University and Collaborative Innovation Center for Biotherapy
- Chengdu
- China
| | - Yubin Cao
- State Key Laboratory of Oral Diseases
- West China Hospital of Stomatology
- Sichuan University
- Chengdu 610041
- China
| | - Xiawei Wei
- State Key Laboratory of Biotherapy and Laboratory for Aging Research
- West China Hospital
- Sichuan University and Collaborative Innovation Center for Biotherapy
- Chengdu
- China
| | - Jidong Li
- Research Center for Nano Biomaterials
- Analytical & Testing Center
- Sichuan University
- Chengdu 610041
- P. R. China
| | - Yi Man
- State Key Laboratory of Oral Diseases
- West China Hospital of Stomatology
- Sichuan University
- Chengdu 610041
- China
| |
Collapse
|
22
|
Therapeutic-designed electrospun bone scaffolds: mesoporous bioactive nanocarriers in hollow fiber composites to sequentially deliver dual growth factors. Acta Biomater 2015; 16:103-16. [PMID: 25617805 DOI: 10.1016/j.actbio.2014.12.028] [Citation(s) in RCA: 91] [Impact Index Per Article: 10.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/18/2014] [Revised: 11/28/2014] [Accepted: 12/30/2014] [Indexed: 11/21/2022]
Abstract
A novel therapeutic design of nanofibrous scaffolds, holding a capacity to load and deliver dual growth factors, that targets bone regeneration is proposed. Mesoporous bioactive glass nanospheres (MBNs) were used as bioactive nanocarriers for long-term delivery of the osteogenic enhancer fibroblast growth factor 18 (FGF18). Furthermore, a core-shell structure of a biopolymer fiber made of polyethylene oxide/polycaprolactone was introduced to load FGF2, another type of cell proliferative and angiogenic growth factor, safely within the core while releasing it more rapidly than FGF18. The prepared MBNs showed enlarged mesopores of about 7 nm, with a large surface area and pore volume. The protein-loading capacity of MBNs was as high as 13% when tested using cytochrome C, a model protein. The protein-loaded MBNs were smoothly incorporated within the core of the fiber by electrospinning, while preserving a fibrous morphology. The incorporation of MBNs significantly increased the apatite-forming ability and mechanical properties of the core-shell fibers. The possibility of sequential delivery of two experimental growth factors, FGF2 and FGF18, incorporated either within the core-shell fiber (FGF2) or within MBNs (FGF18), was demonstrated by the use of cytochrome C. In vitro studies using rat mesenchymal stem cells demonstrated the effects of the FGF2-FGF18 loadings: significant stimulation of cell proliferation as well as the induction of alkaline phosphate activity and cellular mineralization. An in vivo study performed on rat calvarium defects for 6 weeks demonstrated that FGF2-FGF18-loaded fiber scaffolds had significantly higher bone-forming ability, in terms of bone volume and density. The current design utilizing novel MBN nanocarriers with a core-shell structure aims to release two types of growth factors, FGF2 and FGF18, in a sequential manner, and is considered to provide a promising therapeutic scaffold platform that is effective for bone regeneration.
Collapse
|
23
|
El-Fiqi A, Kim JH, Kim HW. Osteoinductive fibrous scaffolds of biopolymer/mesoporous bioactive glass nanocarriers with excellent bioactivity and long-term delivery of osteogenic drug. ACS APPLIED MATERIALS & INTERFACES 2015; 7:1140-1152. [PMID: 25531645 DOI: 10.1021/am5077759] [Citation(s) in RCA: 81] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
Designing scaffolds with bioactive composition and long-term drug delivery capacity is a promising method to improve the therapeutic efficacy in bone regeneration. Herein, electrospun fibrous scaffolds of polycaprolactone-gelatin incorporating mesoporous bioactive glass nanoparticles (mBGn) were proposed to be excellent matrix platforms for bone tissue engineering. In particular, the mBGn were loaded with osteogenic drug Dexamethasone (DEX) to elicit additional therapeutic potential. The mBGn-added fiber scaffolds demonstrated excellent properties, including improved mechanical tensile strength, elasticity, and hydrophilicity compared to pure biopolymer matrix. The scaffolds could release substantial amounts of calcium and silicate ions. The loading of DEX onto mBGn was as high as 63%, that is, 0.63 mg DEX loaded per 1 mg of mBGn, demonstrating an effective nanodepot role of the mBGn. The release of DEX from the mBGn-added fiber scaffolds was highly sustainable, profiling an almost linear release kinetics up to the test period of 28 days, after a rapid initial release of ∼30% within 24 h. The proliferation and osteogenic differentiation of stem cells derived from periodontal ligament were significantly improved by the mBGn incorporation and synergistically stimulated with DEX loading, as confirmed by both direct and indirect cultures. The effects on bone regeneration in vivo, as analyzed by microcomputed tomography and histological stains in a rat calvarium model over 6 weeks, were substantial with the mBGn incorporation and even better with DEX loading, evidencing the osteogenic effects of the drug-eluting nanocomposite fiber scaffolds in bone formation. The current scaffolds with bone-bioactive composition and drug delivery capacity may be potentially useful for bone regeneration as novel osteogenic matrices.
Collapse
Affiliation(s)
- Ahmed El-Fiqi
- Institute of Tissue Regeneration Engineering (ITREN), Dankook University , Cheonan 330-714, South Korea
| | | | | |
Collapse
|