Eggshell membrane biomaterial as a platform for applications in materials science

Eggshells & Eggshell Membranes- A Sustainable Resource for energy storage and energy conversion applications: A critical review

As the world strives to achieve a sustainable future, the exploration of alternative and renewable raw materials for energy storage and energy conversion has gained significant attention. A growing trend on "Waste to Energy" approach has attained prominence. Accordingly, chicken eggshells, a residual from poultry industry, have emerged as a promising candidate due to their abundant availability, low cost, and unique physical and chemical properties. This review article presents an overview of recent advancements in utilizing eggshell waste for energy storage and energy conversion applications. It discusses the transformation of eggshells usage into functional materials, along with their performance in various energy-related applications. The potential of eggshell-based materials in improving energy efficiency and reducing environmental impact is highlighted, providing insights into the future prospects of this sustainable resource.

Utilizing waste eggshells as a calcium precursor for contact precipitation of phosphorus from digested sludge centrate

Phosphorus (P) recovery from wastewater is an essential component of the global P cycle. A contact precipitation process using chicken eggshells as a calcium (Ca) precursor was used to recover P from synthetic wastewater and real digested sludge centrate. Up to 96.4 % of P could be recovered from the digested sludge centrate after three repeated cycles of the contact precipitation process. In addition, 36.1 % of total chemical oxygen demand and 37.6 % of total ammonia nitrogen were removed from the centrate. Finally, most of the precipitates could be collected by a simple washing step. Scanning electron microscopy-energy dispersive spectroscopy and x-ray diffraction results indicated that the eggshells played three roles in this process: Ca source, precipitation substrate, and filter medium. Precipitates were mainly brushite. This research provides a new perspective on P recovery from wastewater using waste eggshells, and if further optimized, has a potential for practical future applications.

Metabolisms of both inorganic and methyl-mercury in hens reveal eggs as an effective bioindicator for environmental Hg pollution

Mercury (Hg) is a globally distributed toxic metal and could pose serious harm to birds, which may ultimately threaten human health through poultry consumption. However, the avian Hg metabolism remains unclear. Poultry, like chickens, are more accessible human dietary sources than wild birds and are ideal proxies to study Hg metabolism in birds. In this study, the avian Hg metabolism is carefully investigated with hens fed by Hg-spiked (both inorganic mercury IHg and methylmercury MeHg) foods. Our results demonstrate that feces and eggs are the main removal pathways of Hg from hens, rather than feathers. Eggs show particularly rapid responses towards Hg exposures, thus could be more sensitive to environmental Hg pollution than feathers, feces or internal organs (and tissues). Egg yolk (with THg peak of 55.92 ng/g on Day 6) and egg white (THg peak of 1195.03 ng/g on Day 4) react as an effective bioindicator for IHg and MeHg exposure, respectively. In 90-day-single-dose exposure, IHg is almost completely excreted, while approximately 11% of MeHg remains in internal organs. Our study provides new insight into the metabolism and lifetime of IHg and MeHg in birds, advancing the understanding of the dynamics for human exposure to Hg through poultry products.

Apatite-coated outer layer eggshell membrane: A novel osteoinductive biohybrid composite for guided bone/tissue regeneration

Hybrid biomimetic materials aim to replicate the organic-inorganic constructs of mineralized tissues. During eggshell formation, the outer surface of the eggshell membrane (ESM) promotes calcium carbonate nucleation, while the inner one prevents mineralization toward the egg white and yolk. In the current study, the outer surface of the ESM acted as a heteronucleant in calcium phosphate precipitation by the vapor diffusion sitting drop method, while the inner one remained unmineralized. The aim was to fabricate a 2D biomaterial with dual functions, osteoinductive on one side and protective against cell invasion on the other side. The microstructural, physicochemical, morphological, and mechanical properties of the mineralized ESM were characterized by XRD, TGA, XPS, FTIR/Raman, HR-SEM, and mechanical testing techniques. The cytocompatibility and osteoinductive ability were assessed by biological assays of cell viability, proliferation, and osteogenic differentiation on human mesenchymal stromal cells (hMSCs). Results indicate that the outer surface of the ESM induces the heterogeneous precipitation of carbonate-apatite phase depicting biomimetic features. In addition, the apatite/ESM shows a much higher cytocompatibility than the pristine ESM and promotes the osteogenic differentiation of hMSCs more efficiently. Overall, the apatite/ESM composite exhibits compositional, crystalline, mechanical, and biological properties that resemble those of mineralized tissues, rendering it an approachable and novel material especially useful in guided tissue/bone regeneration.

A drug-incorporated-microparticle-eggshell-membrane-scaffold (DIMES) dressing: A novel biomaterial for localised wound regeneration

Chronic wounds affect millions of people annually and have emotional and financial implications in addition to health issues. The current treatment for chronic wounds involves the repeated use of bandages and drugs such as antibiotics over an extended period. A cost-effective and convenient solution for wound healing is the development of drug-incorporated bandages. This study aimed to develop a biocompatible bandage made of drug-incorporated poly (lactic-co-glycolic acid) (PLGA) microparticles (MPs) and eggshell membrane (ESM) for cornea wound healing. ESM has desirable properties for wound healing and can be isolated from eggshells using acetic acid or ethylenediaminetetraacetic acid (EDTA) protocols. Fluorescein isothiocyanate-labelled Bovine Serum Albumin (FITC-BSA) was used as a model drug, and the PLGA MPs were fabricated using a solvent extraction method. The MPs were successfully attached to the fibrous layer of the ESM using NaOH. The surface features of the ESM samples containing MPs were studied using a field emission scanning electron microscope (FESEM) and compared with blank ESM images. The findings indicated that the MPs were attached to the ESM fibres and had similar shapes and sizes as the control MPs. The fibre diameters of the MPs samples were assessed using Fiji-ImageJ software, and no significant changes were observed compared to the blank ESM. The surface roughness, Ra values, of the MPs incorporated ESM samples were evaluated and compared to the blank ESM, and no significant changes were found. Fourier transform infrared (FTIR) spectroscopy was used to analyse the chemical Composition of the bandage, and the spectra showed that the FBM were effectively incorporated into the ESM. The FTIR spectra identified the major peaks of the natural ESM and the PLGA polymer in the bandage. The bandage was transparent but had a reduced visibility in the waterproof test card method. The bandage achieved sustained drug release up to 10 days and was found to be biocompatible and non-toxic in a chorioallantoic membrane (CAM) assay. Overall, the drug-incorporated PLGA MPs-ESM bandage has great potential for treating chronic wounds.

Aging-associated increased nitric oxide production is a potential cause of inferior eggshell quality produced by aged laying hens

It is important to prolong the productive life of laying hens without compromising their welfare. Therefore, in this study, we aimed to identify the cause for inferior quality egg production of aged hens by investigating the aging-associated molecular changes related to eggshell formation in the isthmic and uterine mucosae and determining whether nitric oxide plays a role in decreasing the quality of eggs produced by aged hens. Young (35 weeks old) and aged (130 weeks old) White Leghorn laying hens were used in this study to determine the effects of age on the expression of proteins related to eggshell membranes formation in the isthmus and eggshell biomineralization and nitric oxide production in the uterus. Nitric oxide synthesis during the ovulatory cycle was examined in twenty-five laying hens (46-52 weeks old) euthanized at 0, 4, 7, 16, and 24 h after oviposition. S-Nitroso-N-acetylpenicillamine (a nitric oxide donor) was added to the cultured isthmic and uterine mucosal cells to examine the effects of nitric oxide on the expression of genes related to eggshell membranes formation and eggshell biomineralization, respectively. The results showed that the protein abundance of collagen I and V in the isthmic mucosa and collagen V in the eggshell membranes were lower in aged hens than in young hens. The mRNA expression levels of calbindin, osteopontin, and ovocalyxin-36 and the protein abundance of calbindin and carbonic anhydrase-2 were lower in the uterine mucosa of aged hens than in that of young hens. Nitric oxide synthesis was higher in the uterine mucosa of aged hens than in that of young hens. Nitric oxide downregulated the mRNA expression levels of osteopontin and ovocalyxin-36 in cultured uterine mucosal cells. Our results indicated that the eggshell quality decreases with aging due to molecular changes in the uterine mucosa affecting the eggshell membrane formation and eggshell biomineralization. Moreover, nitric oxide overproduction may play a role in this dysfunction.

Self-organized mycelium biocomposites: Effects of geometry and laterite composition on compressive behavior

This study investigates the compressive deformation and the effect of structural architecture on the compressive strength of bioprocessed mycelium biocomposites reinforced with laterite particles. In the mycelium blocks, lignocellulosic hemp hurds function as reinforcing and nutritional substrates. The mycelium acts as a supportive matrix, binding the hemp hurds and the laterite particles which are integrated for further reinforcement to improve the compressive strength of the composite. The compressive behavior of the composites is elucidated using a combined approach of experimental and theoretical studies. The deformation mechanisms are investigated via in-situ observations of the specimens under uniaxial compressive loading. The experiments show that the compressive deformation results in progressive micro-buckling in slender specimens, whereas thicker samples exhibit a soft elastic response at small strain levels followed by continuous stiffening at larger strains. Based on the experimental observations and the morphological characterization, a column buckling analysis was developed for the mycelium-hemp composites to further explain the observed deformation phenomena.

Eggshell Membrane as a Biomaterial for Bone Regeneration

The physicochemical features of the avian eggshell membrane play an essential role in the process of calcium carbonate deposition during shell mineralization, giving rise to a porous mineralized tissue with remarkable mechanical properties and biological functions. The membrane could be useful by itself or as a bi-dimensional scaffold to build future bone-regenerative materials. This review focuses on the biological, physical, and mechanical properties of the eggshell membrane that could be useful for that purpose. Due to its low cost and wide availability as a waste byproduct of the egg processing industry, repurposing the eggshell membrane for bone bio-material manufacturing fulfills the principles of a circular economy. In addition, eggshell membrane particles have has the potential to be used as bio-ink for 3D printing of tailored implantable scaffolds. Herein, a literature review was conducted to ascertain the degree to which the properties of the eggshell membrane satisfy the requirements for the development of bone scaffolds. In principle, it is biocompatible and non-cytotoxic, and induces proliferation and differentiation of different cell types. Moreover, when implanted in animal models, it elicits a mild inflammatory response and displays characteristics of stability and biodegradability. Furthermore, the eggshell membrane possesses a mechanical viscoelastic behavior comparable to other collagen-based systems. Overall, the biological, physical, and mechanical features of the eggshell membrane, which can be further tuned and improved, make this natural polymer suitable as a basic component for developing new bone graft materials.

Eggshell membrane-incorporated cell friendly tough hydrogels with ultra-adhesive property

Adhesive and tough hydrogels have received increased attention for their potential biomedical applications. However, traditional hydrogels have limited utility in tissue engineering because they tend to exhibit low biocompatibility, low adhesiveness, and poor mechanical properties. Herein, the use of the eggshell membrane (ESM) for developing tough, cell-friendly, and ultra-adhesive hydrogels is described. The ESM enhances the performance of the hydrogel network in three ways. First, its covalent cross-linking with the polyacrylamide and alginate chains strengthens the hydrogel network. Second, it provides functional groups, such as amine and carboxyl moieties, which are well known for enhancing the surface adhesion of biomaterials, thereby increasing the adhesiveness of the hydrogel. Third, it is a bioactive agent and improves cell adhesion and proliferation on the constructed scaffold. In conclusion, this study proposes the unique design of ESM-incorporated hydrogels with high toughness, cell-friendly, and ultra-adhesive properties for various biomedical engineering applications.

Protein-supported transition metal catalysts: Preparation, catalytic applications, and prospects

The immobilization of transition metal catalysts onto supports enables their easier recycling and improves catalytic performance. Protein supports not only support and stabilize transition metal catalysts but also enable the incorporation of biocompatibility and enzymatic catalysis into these catalysts. Consequently, the engineering of protein-supported transition metal catalysts (PTMCs) has emerged as an effective approach to improving their catalytic performance and widening their catalytic applications. Here, we review the recent development of the preparation and applications of PTMCs. The preparation of PTMCs will be summarized and discussed in terms of the types of protein supports, including proteins, protein assemblies, protein-polymer conjugates, and cross-linked proteins. Then, their catalytic applications including organic synthesis, photocatalysis, polymerization, and biomedicine, will be surveyed and compared. Meanwhile, the established catalytic structures-function relationships will be summarized. Lastly, the remaining issues and prospects will be discussed. By surveying a wide range of PTMCs, we believe that this review will attract a broad readership and stimulate the development of PTMCs.

Cytoprotection of Probiotic Lactobacillus acidophilus with Artificial Nanoshells of Nature-Derived Eggshell Membrane Hydrolysates and Coffee Melanoidins in Single-Cell Nanoencapsulation

One-step fabrication method for thin films and shells is developed with nature-derived eggshell membrane hydrolysates (ESMHs) and coffee melanoidins (CMs) that have been discarded as food waste. The nature-derived polymeric materials, ESMHs and CMs, prove highly biocompatible with living cells, and the one-step method enables cytocompatible construction of cell-in-shell nanobiohybrid structures. Nanometric ESMH-CM shells are formed on individual probiotic Lactobacillus acidophilus, without any noticeable decrease in viability, and the ESMH-CM shells effectively protected L. acidophilus in the simulated gastric fluid (SGF). The cytoprotection power is further enhanced by Fe³⁺-mediated shell augmentation. For example, after 2 h of incubation in SGF, the viability of native L. acidophilus is 30%, whereas nanoencapsulated L. acidophilus, armed with the Fe³⁺-fortified ESMH-CM shells, show 79% in viability. The simple, time-efficient, and easy-to-process method developed in this work would contribute to many technological developments, including microbial biotherapeutics, as well as waste upcycling.

Eggshell waste separation process assisted with pressure-vacuum: Process conditions and optimization

Eggshells and eggshell membranes have high-value recycling applications and have been widely used in pharmaceutical, chemical, and food research. The separation of eggshells and eggshell membranes is a prerequisite to efficiently using both. Therefore, the pressure-vacuum experiment equipment was designed. In this study, research on the separation of eggshells and eggshell membranes from waste eggshells using the pressure-vacuum experiment equipment was carried out. The flash evaporation experiment process controlled the experimental factors to obtain a sufficient moisture content between the eggshell and eggshell membrane with vigorous flash evaporation. The effects of experimental factors such as superheat (5-10°C), temperature (50-70°C), initial pressure (0.6-0.8 MPa), pressurization time (0-40 min), and particle size (6-8 mm) on the separation rate were investigated in the pressure-vacuum experiment process. Through single-factor and orthogonal experiments, it was found that the separation rate was most affected by changes in temperature, initial pressure, and particle size, followed by the interaction of temperature and particle size. The experimental results suggested that the optimum separation of eggshell membranes from eggshells was achieved at higher superheat, higher temperature, higher initial pressure, medium pressurization time, and smaller particle size. Through optimization by response surface methodology, the optimal conditions for the separation of eggshells and eggshell membranes using the flash evaporation method were determined as 15°C of superheat, 70°C of temperature, 0.8 MPa of initial pressure, and 6 mm of particle size. Flash evaporation method is an effective and environmentally friendly method, which provides a new solution for the recycling of waste eggshells. PRACTICAL APPLICATION: In this study, pressure-vacuum experiment equipment was utilized to reuse of waste eggshells, and an innovative and environmentally friendly method of eggshell membrane and eggshell separation was established. The pressure-vacuum experiment equipment has a simple structure and low energy consumption. The results of flash evaporation experiments are instructive for further in-depth studies on the separation of eggshells and eggshell membranes. Furthermore, the separation of eggshells and egg membranes by flash evaporation is of great research value. Most importantly, the separated eggshells and eggshell membrane are available for high-value applications in food, chemical, and biological fields.

Natural Piezoelectric Biomaterials: A Biocompatible and Sustainable Building Block for Biomedical Devices

The piezoelectric effect has been widely observed in biological systems, and its applications in biomedical field are emerging. Recent advances of wearable and implantable biomedical devices bring promise as well as requirements for the piezoelectric materials building blocks. Owing to their biocompatibility, biosafety, and environmental sustainability, natural piezoelectric biomaterials are known as a promising candidate in this emerging field, with a potential to replace conventional piezoelectric ceramics and synthetic polymers. Herein, we provide a thorough review of recent progresses of research on five major types of piezoelectric biomaterials including amino acids, peptides, proteins, viruses, and polysaccharides. Our discussion focuses on their structure- and phase-related piezoelectric properties and fabrication strategies to achieve desired piezoelectric phases. We compare and analyze their piezoelectric performance and further introduce and comment on the approaches to improve their piezoelectric property. Representative biomedical applications of this group of functional biomaterials including energy harvesting, sensing, and tissue engineering are also discussed. We envision that molecular-level understanding of the piezoelectric effect, piezoelectric response improvement, and large-scale manufacturing are three main challenges as well as research and development opportunities in this promising interdisciplinary field.

From Inert to Catalytically Active Milling Media: Galvanostatic Coating for Direct Mechanocatalysis

The inert milling balls, commonly utilized in mechanochemical reactions, were coated with a layer of Pd and utilized as catalyst in the direct mechanocatalytic Suzuki reaction. With high yields (>80 %), the milling balls can be recycled multiple times in the absence of any solvents, ligands, catalyst-molecules and -powders, while utilizing as little as 0.8 mg of Pd per coated milling ball. The coating sequence, the support material, and the layer thickness were examined towards archiving high catalyst retention, low abrasion and high conversion. The approach was transferred to the coating of milling vessels revealing the interplay between catalytically available surface area and the mechanical energy impact in direct mechanocatalysis.

Therapeutic Application of an Ag-Nanoparticle-PNIPAAm-Modified Eggshell Membrane Construct for Dermal Regeneration and Reconstruction

Current therapeutic treatments for the repair and/or replacement of damaged skin following disease or traumatic injury is severely limited. The chicken eggshell membrane (ESM) is a unique material: its innate physical and mechanical characteristics offer optimal barrier properties and, as a naturally derived extract, it demonstrates inherent biocompatibility/biodegradability. To further enhance its therapeutic and clinical potential, the ESM can be modified with the thermo-responsive polymer, poly(N-isopropylacrylAmide) (PNIPAAm) as well as the incorporation of (drug-loaded) silver nanoparticles (AgNP); essentially, by a simple change in temperature, the release and delivery of the NP can be targeted and controlled. In this study, ESM samples were isolated using a decellularization protocol, and the physical and mechanical characteristics were profiled using SEM, FT-IR, DSC and DMA. PNIPAAm was successfully grafted to the ESM via amidation reactions and confirmed using FT-IR, which demonstrated the distinctive peaks associated with Amide A (3275 cm−1), Amide B (2970 cm−1), Amide I (1630 cm−1), Amide II (1535 cm−1), CH2, CH3 groups, and Amide III (1250 cm−1) peaks. Confirmation of the incorporation of AgNP onto the stratified membrane was confirmed visually with SEM, qualitatively using FT-IR and also via changes in absorbance at 380 nm using UV-Vis spectrophotometry during a controlled release study for 72 h. The biocompatibility and cytotoxicity of the novel constructs were assessed using human dermal fibroblast (HDFa) and mouse dermal fibroblast (L929) cells and standard cell culture assays. Metabolic activity assessment (i.e., MTS assay), LDH-release profiles and Live/Dead staining demonstrated good attachment and spreading to the samples, and high cell viability following 3 days of culture. Interestingly, longer-term viability (>5 days), the ESM-PNIPAAm and ESM-PNIPAAm (AgNP) samples showed a greater and sustained cell viability profile. In summary, the modified and enhanced ESM constructs were successfully prepared and characterized in terms of their physical and mechanical profiles. AgNP were successfully loaded into the construct and demonstrated a desirable release profile dependent on temperature modulation. Fibroblasts cultured on the extracted ESM samples and ESM-PNIPAAm demonstrated high biocompatibility in terms of high cell attachment, spreading, viability and proliferation rates. As such, this work summarizes the development of an enhanced ESM-based construct which may be exploited as a clinical/therapeutic wound dressing as well as a possible application as a novel biomaterial scaffold for drug development.

High-efficiency decomposition of eggshell membrane by a keratinase from Meiothermus taiwanensis

Eggshell membrane (ESM), a plentiful biological waste, consists of collagen-like proteins and glycosaminoglycans (GAGs) such as hyaluronic acid (HA). Here we used a keratinase (oeMtaker)-mediated system to decompose ESM. The best reaction condition was established by incubating the solution containing oeMtaker, sodium sulfite, and ESM with a weight ratio of 1:120:600. ESM enzymatic hydrolysate (ESM-EH) showed a high proportion of essential amino acids and type X collagen peptides with 963–2259 Da molecular weights. The amounts of GAGs and sulfated GAGs in ESM-EH were quantified as 6.4% and 0.7%, respectively. The precipitated polysaccharides with an average molecular weight of 1300–1700 kDa showed an immunomodulatory activity by stimulating pro-inflammatory cytokines (IL-6 and TNF-α) production. In addition, a microorganism-based system was established to hydrolyze ESM by Meiothermus taiwanensis WR-220. The amounts of GAGs and sulfated GAGs in the system were quantified as 0.9% and 0.1%, respectively. Based on our pre-pilot tests, the system shows great promise in developing into a low-cost and high-performance process. These results indicate that the keratinase-mediated system could hydrolyze ESM more efficiently and produce more bioactive substances than ever for therapeutical applications and dietary supplements.

Process optimization for the rapid conversion of calcite into hydroxyapatite microspheres for chromatographic applications

Microsphere hydroxyapatite (HAp) is widely used in various biomedical and chromatographic applications. The work described in this manuscript focuses on a dissolution precipitation method for production of HAp microspheres. This method overcomes certain drawbacks of conventional preparation methods used for HAp preparation, which produce polydisperse particles and are time-consuming and expensive. In the present work, the calcium carbonate (calcite) particles were directly and rapidly converted into HAp microspheres using an inexpensive dissolution precipitation method. The effects of the reaction temperature, time, and mechanical stirring rates were studied, and the reaction parameters were optimized. As confirmed by the XRD studies, the higher reaction temperature and time promote complete HAp conversion, while calcite residues were observed for lower temperatures and times. SEM images show the influence of reaction parameters on the surface microstructure of the microspheres produced. It was observed that the HAp microspheres undergo disintegration at a higher stirring rate. The reaction parameters optimized in this work were ideal for preparing HAp microspheres. The resultant HAp particles were utilized as matrices for chromatographic separation of protein mixtures.

High value applications and current commercial market for eggshell membranes and derived bioactives

Chicken eggshell membrane (ESM) is a highly insoluble structure that is greatly stabilized by extensive desmosine, isodesmosine, and disulfide cross-linkages. The ESM possesses numerous biological functions including anti-microbial, anti-inflammatory, anti-wrinkle, and antioxidant activities. The ESM is mainly proteinaceous; proteomics and bioinformatics analysis of ESM has identified > 500 proteins, such as collagens, glycoproteins, avian beta-defensins, and lysozyme. ESM also contains significant amounts of carbohydrate, including hyaluronic acid (HA). In general, HA plays an important role in tissue hydration and cellular mechanisms such as growth, differentiation, and transport, and has diverse health and medical applications. Despite ESM being rich in important bioactive compounds, it is often considered as a waste product of the egg-breaking industry and is under-utilized. A major challenge for the successful commercial exploitation of ESM and bioactive constituents is its limited solubility and bioavailability due to cross-linkages of ESM fibers. Various processing and extraction methods are employed to overcome these limitations and improve the production of HA and collagen-based ESM formats. Moreover, we believe that there is a wide scope to exploit ESM for novel applications, leading to new intellectual property (IP) and patenting opportunities. This review presents an overview of scientific background, IP landscape and current commercial market for ESM and derived bioactives including collagens and HA. A detailed literature survey is provided for each area of interest. We analyze regulatory guidelines for ESM, contrasting quality control / microbial safety assessment in cosmetics and personal care products (hazard based) with that of the food industry (risk-based). New perspectives for upcycling of ESM waste to commercially viable high-value biomaterials as nutraceutical supplements and as cosmetics ingredients are discussed. This overview of ESM separation techniques and applications could form the basis for directed research and product development in order to exploit the unique bioactivities of ESM.

Membrana de cáscara de huevo para la curación de heridas superficiales en ratones

Introducción.

Las membranas de la cáscara de huevo presentan propiedades beneficiosas para la regeneración de tejidos y sus aplicaciones biomédicas son importantes.

Objetivo.

Demostrar la efectividad de las membranas de la cáscara de huevo no fecundado de gallina en el tratamiento de heridas abiertas superficiales en ratones, en comparación con el procedimiento convencional.

Materiales y métodos.

Se hizo una herida superficial lineal de 15 mm en la espalda de 10 ratones albinos machos. Los ratones se dividieron en cuatro grupos, uno no recibió ningún tratamiento y los otros tres sí: uno, tratamiento convencional, otro, con membranas de huevo directamente aplicadas a la herida y, el otro, con membranas en forma de polvo.

La evolución de las heridas se registró en fotografías y se calculó la tasa de reducción de la longitud de la herida, así como el tiempo y el porcentaje de curación. Los porcentajes de curación se analizaron con ANOVA y la prueba de Dunnett (p<0,05).

Resultados.

Con los tratamientos con membranas de huevo y polvo de membrana, se logró una tasa de reducción de longitud de 1.009 y 1.020 mm/día, respectivamente, y un tiempo de curación de 12 días, en tanto que, con el tratamiento convencional, la tasa de reducción fue de 0,852 mm/día y la curación se dio en 16 días. El análisis estadístico mostró diferencias significativas entre los tratamientos con membrana de huevo y el tratamiento convencional.

Conclusiones.

Las membranas de la cáscara de huevo aplicadas de forma directa y en polvo resultaron más efectivas que la aplicación del procedimiento convencional en el tratamiento de heridas abiertas superficiales en ratones.

Egg Shell Membrane as an Alternative Vascular Patch for Arterial Angioplasty

Introduction: The egg shell membrane (ESM) is always considered as waste, but recent studies have shown that it has the potential to yield rapid re-endothelialization in vitro. We hypothesized that ESM and heparin-conjugated ESM (HESM) can be used as arterial patch in a rat aortic angioplasty model.

Method: Sprague-Dawley rat (200 g) abdominal aortic patch angioplasty model was used. Decellularized rat thoracic aorta (TA) patch was used as the control; ESM patch was made of raw chicken egg; heparin-coated ESM (HESM) patch was made by using dopamine; anticoagulation properties were verified using platelet adhesion tests; the TA, ESM, and HESM patches were implanted to the rat aorta and harvested at day 14; and the samples were examined by immunohistochemistry and immunofluorescence.

Result: The ESM patch showed a similar healing process to the TA patch; the cells could migrate and infiltrate into both patches; there was a neointima with von Willebrand factor-positive endothelial cells; the endothelial cells acquired arterial identity with Ephrin-B2- and dll-4-positive cells; there were proliferating cell nuclear antigen (PCNA)-positive cells, and PCNA and alpha smooth muscle actin dual-positive cells in the neointima in both groups. Heparin was conjugated to the patch successfully and showed a strong anticoagulation property in vitro. HESM could decrease mural thrombus formation after rat aortic patch angioplasty.

Conclusion: The ESM is a natural scaffold that can be used as a vascular patch; it showed a similar healing process to decellularized TA patch; HESM showed anticoagulation property both in vitro and in vivo; and the ESM may be a promising vascular graft in the clinic.

Synthesis and Characterization of Calcium Phosphate Materials Derived from Eggshells from Different Poultry with and without the Eggshell Membrane

Calcium phosphate materials such as hydroxyapatite (HA) or tricalcium phosphate (β-TCP) are highly attractive due to their multitude of applications in bone replacement as well as their environmental and ecological credentials. In this research, quail, hen, duck, and pigeon eggshells were used as a calcium source to obtain calcium phosphate materials via the environmentally friendly wet synthesis. Using the eggshells with the organic membrane, the biphasic calcium phosphate materials composed mainly of HA were obtained. The second mineral phase was β-TCP in the case of using quail, hen, and pigeon eggshells and octacalcium phosphate (OCP) in the case of duck eggshells. The HA content in the obtained materials depended on the amount of membrane in the eggshells and decreased in the order of pigeon, duck, hen, and quail eggshells. The eggshell membrane removal from the eggshells caused the reduced content of HA and the presence of the more soluble β-TCP or OCP phase in the obtained materials. The calcium ions release profile in the PBS buffer indicates the potential biomedical application of these materials.

Bioactive glass-based fibrous wound dressings

Since the discovery of silicate bioactive glass (BG) by Larry Hench in 1969, different classes of BGs have been researched over decades mainly for bone regeneration. More recently, validating the beneficial influence of BGs with tailored compositions on angiogenesis, immunogenicity and bacterial infection, the applicability of BGs has been extended to soft tissue repair and wound healing. Particularly, fibrous wound dressings comprising BG particle reinforced polymer nanofibers and cotton-candy-like BG fibers have been proven to be successful for wound healing applications. Such fibrous dressing materials imitate the physical structure of skin’s extracellular matrix and release biologically active ions e.g. regenerative, pro-angiogenic and antibacterial ions, e.g. borate, copper, zinc, etc., that can provoke cellular activities to regenerate the lost skin tissue and to induce new vessels formation, while keeping an anti-infection environment. In the current review, we discuss different BG fibrous materials meant for wound healing applications and cover the relevant literature in the past decade. The production methods for BG-containing fibers are explained and as fibrous wound dressing materials, their wound healing and bactericidal mechanisms, depending on the ions they release, are discussed. The present gaps in this research area are highlighted and new strategies to address them are suggested.

Recent Advances in Applications of Bioactive Egg Compounds in Nonfood Sectors

Egg, a highly nutritious food, contains high-quality proteins, vitamins, and minerals. This food has been reported for its potential pharmacological properties, including antibacterial, anti-cancer, anti-inflammatory, angiotensin-converting enzyme (ACE) inhibition, immunomodulatory effects, and use in tissue engineering applications. The significance of eggs and their components in disease prevention and treatment is worth more attention. Eggs not only have been known as a "functional food" to combat diseases and facilitate the promotion of optimal health, but also have numerous industrial applications. The current review focuses on different perceptions and non-food applications of eggs, including cosmetics. The versatility of eggs from an industrial perspective makes them a potential candidate for further exploration of several novel components.

Injectable eggshell-derived hydroxyapatite-incorporated fibroin-alginate composite hydrogel for bone tissue engineering

Tissue engineering is a promising approach to repair and regenerate damaged or lost tissues or organs. In dental aspect, reconstruction of the resorbed alveolar bone after tooth extraction plays an important role in the success of dental substitution, especially in dental implant treatment. The hydroxyapatite (HA)-incorporated fibroin-alginate composite injectable hydrogel was fabricated to be used as scaffold for bone regeneration. HA was synthesized from eggshell biowaste. Fibroin was extracted from Bombyx mori cocoon. The synthesized HA, fibroin and alginate hydrogel were characterized. HA-incorporated fibroin-alginate hydrogel had decreased pore size and porosity compared with pure alginate hydrogel. Thermal analysis showed that hydrogel had a degradation peak of approximately 250 °C. Hydrogel could absorb water, with a swelling ratio of around 300% at 24 h. Hydrogel was degraded as time passed and almost completely degraded at day 7. Its compressive Young's modulus was approximately 0.04 ± 0.02 N/mm² to 0.10 ± 0.02 N/mm². Primary cytotoxicity test indicated non-toxic potential of the fabricated hydrogel. Increased ALP activity was observed in MC3T3-E1 cultured in HA-incorporated fibroin-alginate hydrogel. Results suggested the potential use of injectable HA fibroin-alginate hydrogel as dental scaffolding material. Further studies including in vivo examinations are needed prior to its clinical application.

Avian Egg: A Multifaceted Biomaterial for Tissue Engineering

Most components in avian eggs, offering a natural and environmentally friendly source of raw materials, hold great potential in tissue engineering. An avian egg consists of several beneficial elements: the protective eggshell, the eggshell membrane, the egg white (albumen), and the egg yolk (vitellus). The eggshell is mostly composed of calcium carbonate and has intrinsic biological properties that stimulate bone repair. It is a suitable precursor for the synthesis of hydroxyapatite and calcium phosphate, which are particularly relevant for bone tissue engineering. The eggshell membrane is a thin protein-based layer with a fibrous structure and is constituted of several valuable biopolymers, such as collagen and hyaluronic acid, that are also found in the human extracellular matrix. As a result, the eggshell membrane has found several applications in skin tissue repair and regeneration. The egg white is a protein-rich material that is under investigation for the design of functional protein-based hydrogel scaffolds. The egg yolk, mostly composed of lipids but also diverse essential nutrients (e.g., proteins, minerals, vitamins), has potential applications in wound healing and bone tissue engineering. This review summarizes the advantages and status of each egg component in tissue engineering and regenerative medicine, but also covers their current limitations and future perspectives.

Fabrication of recyclable magnetic biosorbent from eggshell membrane for efficient adsorption of dye

Magnetic eggshell membrane powder (MESM-P) were synthesized and used to remove Congo red (CR) dye from wastewater. The biosorption performance were evaluated at varying operating conditions, including initial pH, dye concentrations, contact time, and temperatures. Thekinetics studies revealed that the adsorption process can be better described by the pseudo-second-order model. The adsorption process conformed better to the Langmuir model with a maximum biosorption capacity of 1037.02 mg g^-1 _. An ethanol-water system was employed as a fast, effective and harmless desorptionsolvent for the regeneration of biosorbent. The system of 70% ethanol-30%water atpH 13 presented the maximum desorption efficiency up to 96.16%. The MESM-P could be easily regenerated and remained a high adsorption efficiency of 79.55% after ten reusing cycles. Therefore, the prepared MESM-P biosorbent could be a promising candidate for the removal of dye pollution from wastewater.

Avian Eggshell Membrane as a Novel Biomaterial: A Review

The eggshell membrane (ESM), mainly composed of collagen-like proteins, is readily available as a waste product of the egg industry. As a novel biomaterial, ESM is attractive for its applications in the nutraceutical, cosmetic, and pharmaceutical fields. This review provides the main information about the structure and chemical composition of the ESM as well as some approaches for its isolation and solubilization. In addition, the review focuses on the role and performance of bioactive ESM-derived products in various applications, while a detailed literature survey is provided. The evaluation of the safety of ESM is also summarized. Finally, new perspectives regarding the potential of ESM as a novel biomaterial in various engineering fields are discussed. This review provides promising future directions for comprehensive application of ESM.

Biotechnological Applications of Eggshell: Recent Advances

The eggshell (ES) provides protection against pathogenic and physical insults while supplying essential metabolic and nutritional needs for the growing avian embryo. It is constituted mainly of calcium carbonate arranged as calcite crystals. The global chicken egg production in 2018 was over 76.7 million metric tons. In industrialized countries, about 30% of eggs are processed at breaker plants that produce liquid egg products and large quantities of solid ES waste. ES waste is utilized for a variety of low-value applications, or alternatively is disposed in landfill with associated economic and environmental burdens. The number of patents pertaining to ES applications has increased dramatically in recent years; of 673 patents granted in the last century, 536 (80%) were published in the last two decades. This review provides a snapshot of the most recent patents published between 2015 and 2020, with emphasis on different biotechnological applications of ES waste, and summarizes applications for biomedical, chemical, engineering, and environmental technologies. Biomedical technologies include the production of calcium lactate, calcium phosphate, and health-promoting products, while chemical technologies include plant growth promoters, food processing and production, and biodiesel oil catalysis along with active calcium, carbon, soluble proteins, organic calcium, and ultrafine calcium carbonate sources. Engineering technologies address material engineering and nanoparticle production, while environmental technologies pertain to production of biomass, solubilization of sludge as well as production of magnetic ES adsorbents and adsorption of heavy metals, organics, total nitrogen and fluoride, soil pollutants, and radioactive compounds. Although the number of ES-based patents has exponentially increased in the last decade, exploration of innovative top-down approaches and ES development as a physical platform are new endeavors that are expected to further increase the upscaling of ES waste exploitation.

The eggshell membrane: A potential biomaterial for corneal wound healing

The eggshell membrane (ESM) is an abundant resource with innate complex structure and composition provided by nature. With at least 60 million tonnes of hen eggs produced globally per annum, utilisation of this waste resource is highly attractive in positively impacting sustainability worldwide. Given the morphology and mechanical properties of this membrane, it has great potential as a biomaterials for wound dressing. However, to date, no studies have demonstrated nor reported this application. As such, the objective of this investigation was to identify and optimise a reproducible extraction protocol of the ESM and to assess the physical, chemical, mechanical and biological properties of the substrate with a view to use as a wound dressing. ESM samples were isolated by either manual peeling (ESM-strip) or via extraction using acetic acid [ESM-A0.5] or ethylenediaminetetraacetic acid, EDTA [ESM-E0.9]. Energy dispersive X-ray spectroscopy (EDS) confirmed that there were no traces of calcium residues from the extraction process. Fourier transform infrared (FTIR) spectroscopy revealed that the extraction method (acetic acid and EDTA) did not alter the chemical structures of the ESM and also clarified the composition of the fibrous proteins of the ESM. Scanning electron microscopy (SEM) analyses revealed a three-layer composite structure of the ESM: an inner layer as continuous, dense and non-fibrous (limiting membrane), a middle layer with a network of fibres (inner shell membrane) and the outer layer (outer shell membrane) of larger fibres. Material properties including optical transparency, porosity, fluid absorption/uptake, thermal stability, mechanical profiling of the ESM samples were performed and demonstrated suitable profiles for translational applications. Biological in vitro studies using SV40 immortalised corneal epithelial cells (ihCEC) and corneal mesenchymal stromal cells (C-MSC) demonstrated excellent biocompatibility. Taken together, these results document the development of a novel sustainable biomaterial that may be used for ophthalmic wounds and/or other biomedical therapies.

Rebirth of the Eggshell Membrane as a Bioactive Nanoscaffold for Tissue Engineering

Eggshell membrane (ESM)-based biomaterials have generated significant interest for their potential biomedical applications, including those in tissue engineering and regenerative medicine. Herein, the development of a bioactive ESM-based nanopatterned scaffold for enhancing the adhesion and functions of cells has been described. To control the shape of the raw ESM with entangled protein fibers, a two-step dissolution technique is used. Subsequently, nanoimprint lithography is applied to the ESM solution to fabricate scaffolds with a nanotopographic surface inspired by the fiber alignment of the extracellular matrix. In this way, the morphology and proliferation of attached osteoblasts are sensitively controlled through their response to the nanopatterned topography of the prepared scaffold, allowing significant improvements in their osteogenic differentiation and growth factor secretion. This study demonstrates the potential use of this bioactive ESM-based nanopatterned substrate as an effective cell and tissue engineering scaffold.

Eggshell membranes coated chitosan decorated with metal nanoparticles for the catalytic reduction of organic contaminates

This study focusses on the effect of chitosan coating with eggshell membranes for the reduction of different organic pollutants. Chickens eggs were collected from the local market and utilized to extract the enrich eggshell membranes (ESM). The chicken eggshell membranes are abundant waste material which is inexpensive and illustrates remarkable physiognomies for many possible applications. Fresh fibers/strips coated by chitosan (CS) were prepared by mixing the eggshell membranes with CS solution (2 wt%/v) in different proportions i.e., 10 %, 30 %, 50 %, 60 %, 70 %, 80 %, and 90 %. These strips were then templated with copper and iron metal nanoparticles by putting them in their metal ions aqueous solution to adsorb the metals ions and were then reduced to zero-valent metal nanoparticles (MNPS) by using NaBH₄ aqueous solution. These prepared materials (MNPS@ESM-CS) were characterized by using XRD, XPS, FE-SEM, and EDS to confirm the successful preparation of MNPs over the surface of ESM coated with CS. Afterwards, these prepared materials were investigated as a catalyst for the reduction of different organic pollutants, such as 4-nitroaniline (4-NA), 4-nitrophenol (4-NP) and methylene blue (MB) dye. The catalytic efficiency of ESM was enhanced 5.7-fold by adding only 20 % CS solution. It was observed that Cu@ESM-CS-80 % took 7 min for reduction of 4-NA, 6 min for 4-NP, and 7 min for MB dye. The reusability of the catalytic strip was also investigated for four cycles and found efficient and can be easily recovered by simply pulling it from the reaction mixture.

Fabrication and Characterization of Polyvinylpyrrolidone-Eggshell Membrane-Reduced Graphene Oxide Nanofibers for Tissue Engineering Applications

One of the best methods to prevent wound infection and speed up wound healing is wound dressing based on nanofiber-polymer scaffolds, which have acceptable antimicrobial performance and appropriate skin regeneration capabilities. In this paper, the electrospinning method was applied to synthesize the polyvinylpyrrolidone-acrylic acid hydrogel (PVPA)-eggshell membrane (ESM)-reduced graphene oxide (rGO) nanosheets nanocomposite dressings with different reduced graphene oxide contents (0, 0.5, 1, and 2 wt.%). Thus, smooth nanofibers were fabricated, including a high amount of rGO, which reduced the fiber diameter. Based on the results, rGO played an important role in water impermeability. The results showed that by increasing the rGO concentration from 0.5 to 2 wt%, the contact angle value increased persistently. Results showed that compared to PVPA-ESM, the mechanical strength and strain of PVPA-ESM/1 wt% rGO significantly enhanced 28% and 23%, respectively. Incorporation of 1 wt% rGO enhanced swelling ratio from 875% for PVPA-ESM to 1235% after 420 min, while increasing the rGO to 2 wt% increased the degradation rate of the composites. According to the in vitro cell culture studies, PVPA-ESM wound dressings with 0.5-1 wt% rGO content enhanced PC12 cell viability compared to the wound dressings without rGO nanosheets. Generally, rGO-loaded PVPA-ESM nanofiber wound dressing can be considered as a potential candidate to be used in skin regeneration applications.

Eggshell membrane as a bioactive agent in polymeric nanotopographic scaffolds for enhanced bone regeneration

A bone regeneration scaffold is typically designed as a platform to effectively heal a bone defect while preventing soft tissue infiltration. Despite the wide variety of scaffold materials currently available, such as collagen, critical problems in achieving bone regeneration remain, including a rapid absorption period and low tensile strength as well as high costs. Inspired by extracellular matrix protein and topographical cues, we developed a polycaprolactone-based scaffold for bone regeneration using a soluble eggshell membrane protein (SEP) coating and a nanotopography structure for enhancing the physical properties and bioactivity. The scaffold exhibited adequate flexibility and mechanical strength as a biomedical platform for bone regeneration. The highly aligned nanostructures and SEP coating were found to regulate and enhance cell morphology, adhesion, proliferation, and differentiation in vitro. In a calvaria bone defect mouse model, the scaffolds coated with SEP applied to the defect site promoted bone regeneration along the direction of the nanotopography in vivo. These findings demonstrate that bone-inspired nanostructures and SEP coatings have high potential to be applicable in the design and manipulation of scaffolds for bone regeneration.

State-of-the-Art of Eggshell Waste in Materials Science: Recent Advances in Catalysis, Pharmaceutical Applications, and Mechanochemistry

Eggshell waste is among the most abundant waste materials coming from food processing technologies. Despite the unique properties that both its components (eggshell, ES, and eggshell membrane, ESM) possess, it is very often discarded without further use. This review article aims to summarize the recent reports utilizing eggshell waste for very diverse purposes, stressing the need to use a mechanochemical approach to broaden its applications. The most studied field with regards to the potential use of eggshell waste is catalysis. Upon proper treatment, it can be used for turning waste oils into biodiesel and moreover, the catalytic effect of eggshell-based material in organic synthesis is also very beneficial. In inorganic chemistry, the eggshell membrane is very often used as a templating agent for nanoparticles production. Such composites are suitable for application in photocatalysis. These bionanocomposites are also capable of heavy metal ions reduction and can be also used for the ozonation process. The eggshell and its membrane are applicable in electrochemistry as well. Due to the high protein content and the presence of functional groups on the surface, ESM can be easily converted to a high-performance electrode material. Finally, both ES and ESM are suitable for medical applications, as the former can be used as an inexpensive Ca2+ source for the development of medications, particles for drug delivery, organic matrix/mineral nanocomposites as potential tissue scaffolds, food supplements and the latter for the treatment of joint diseases, in reparative medicine and vascular graft producing. For the majority of the above-mentioned applications, the pretreatment of the eggshell waste is necessary. Among other options, the mechanochemical pretreatment has found an inevitable place. Since the publication of the last review paper devoted to the mechanochemical treatment of eggshell waste, a few new works have appeared, which are reviewed here to underline the sustainable character of the proposed methodology. The mechanochemical treatment of eggshell is capable of producing the nanoscale material which can be further used for bioceramics synthesis, dehalogenation processes, wastewater treatment, preparation of hydrophobic filters, lithium-ion batteries, dental materials, and in the building industry as cement.

A new bioremediation method for removal of wastewater containing oils with high oleic acid composition: Acinetobacter haemolyticus lipase immobilized on eggshell membrane with improved stabilities

As a result of the increasing demand for edible oils, which are an important part of human nutrition, in recent years, serious environmental problems may arise both during the production and after consumption of these oils.

Cr(VI) adsorption from aqueous streams on eggshell membranes of different birds used as biosorbents

The discharges enriched with heavy metals, particularly Cr(VI), are a serious environmental problem. In this work, it is presented the use of biosorbents from eggshells membranes of ostrich, quail, duck and chicken; the membranes were easily prepared and studied for the removal of Cr(VI) from aqueous solutions. Maximum uptake of 1.41 mmol g−1 membrane permitted the identification of ostrich membrane as the material with the highest Cr(VI) uptake. N2 adsorption experiments permitted to classify ostrich membranes as mesoporous materials, since they had pore size of 14.8 nm. This represented an advantage on the nature of these membranes to be used as biosorbents with respect to other membranes. The adsorption isotherm models such as Langmuir and Freundlich were verified using experimental data. Langmuir model described the adsorption process satisfactorily at pH 1 and 2 whereas Freundlich model fitted data better at pH 3 and 5. The adsorption kinetic data were adjusted to a pseudo-second order kinetic model. TGA results permitted demonstrating a low thermal stability of ostrich membrane, since it starts decomposing at around 50°C due to the fact that membranes have about 60% protein. Through SEM microscopy was possible to observe the morphology of the membrane surfaces before and after Cr(VI) uptake which reflects the textural characteristics of the biosorbent. FTIR and XPS analyses suggested that Cr was adsorbed on ostrich membranes through the amine groups of proteins conforming the fibers of membranes. Despite the oxygen shows higher electronegativity than N, Cr shows more preference toward N due to fact that pH conditions favor the positive charges on the surface of the membrane. Our results make evident that this waste material is a novel and efficient option for the removal of Cr(VI) from aqueous solutions.

Removal of Basic Fuchsin from water by using mussel powdered eggshell membrane as novel bioadsorbent: Equilibrium, kinetics, and thermodynamic studies

This study aims to remove organic cationic dye Basic Fuchsin (BF) by adsorption onto a low cost eggshell membrane (ESM) in batch mode at 293 K. XRD analysis confirms the amorphous nature of ESM meanwhile FTIR spectroscopy reveals the presence of several functional groups such as hydroxyl (-OH), sulfhydryl (-SH), carboxyl (-COOH), and amino (-NH₂). Morphological observations by SEM indicate its fibrous microstructure. BET analysis shows a surface area of 11.56 m² g^-1 and the presence of mesopores with a volume of 6.173 10^-3 cm³ g^-1. The value of pH_PZC of ESM is 7.05. The influence of adsorbent dose, contact time, pH, temperature and dye concentration is examined. The highest adsorption capacity around 48 mg.g^-1is achieved for a dye concentration 250 ppm, pH 6 and 25 °C. In addition, adsorption has been found to follow pseudo-second order kinetics. The analysis of the experimental data using linear forms based on Langmuir, Freundlich and Temkin isotherm models indicate that the best fit is obtained with Freundlich model. Thermodynamic parameters (Gibbs free energy, enthalpy, and entropy) reveal that the adsorption of BF onto ESM is an exothermic and spontaneous process. A comprehensive mechanism for BF adsorption by ESM has been proposed.

Development and characterization of magnetic eggshell membranes for lead removal from wastewater

An increasing concern for natural resources preservation and environmental safety is the removal of heavy metals from contaminated water. It is essential to develop simple procedures that use ecofriendly materials with high removal capacities. In this context, we have synthesized a new hybrid material in which eggshell membranes (ESMs) act as nucleation sites for magnetite nanoparticles (MNPs) precipitation in the presence of an external magnetic field. As a result, ESM was transformed into a magnetic biomaterial (MESM) in order to combine the Pb adsorption abilities of both MNPs and ESM and to facilitate collection of the bioadsorbant using an external magnetic field. This green co-precipitation method produced long strands of bead-like 50 nm superparamagnetic MNPs decorating the ESM fibers. When MESM were incubated in Pb(NO₃)₂ solutions, the hybrid material displayed a 2.5-fold increase in binding constant with respect to that of ESM alone, and a 10-fold increased capacity to remove Pb ions from aqueous solution. The manufactured MESMs present a maximum loading capacity of 0.066 ± 0.009 mg Pb/mg MNPs at 25 °C, which is increased up to 0.15 ± 0.05 mg Pb/mg MNPs at 45 °C. Moreover, the MESM system is very stable, since incubation in 1% HCl solution resulted in rapid Pb desorption, while MNP release from the MESM during the same period was negligible. Altogether, these results suggest that MESM could be utilized as an efficient nanoremediation agent for separation/removal of heavy metal ions or other charged pollutants from contaminated waters, with facile recovery for recycling.

Egg By-Products as a Tool to Remove Direct Blue 78 Dye from Wastewater: Kinetic, Equilibrium Modeling, Thermodynamics and Desorption Properties

Eggshell, a waste material from food manufacturing, can be used as a potential ecofriendly adsorbent for the elimination of textile dyes from water solutions. The adsorption process was evaluated varying factors such as initial dye load, contact time, pH, quantity of adsorbent, and temperature. The initial dye load (Direct Blue 78) was in the range of 25–300 mg/L. The kinetics of adsorption were analyzed using different models, such as pseudo-first-order, pseudo-second-order, and intraparticle diffusion model. Also, the experimental data at equilibrium were studied using Freundlich, Langmuir, and Temkin isotherms. The kinetics followed pseudo-second-order, then pseudo-first-order, and finally the model of intraparticle diffusion. The results obtained for data at equilibrium follow the order: Freundlich > Langmuir > Temkin. The adsorption equilibrium showed a maximum capacity of adsorption (q_max) of 13 mg/g at pH 5, and using 0.5 g of eggshell. Dye adsorption was enhanced with increasing temperatures. The thermodynamic study revealed the spontaneity and endothermic nature of the adsorption process. The desorption study shows that the eggshell could be reused in different adsorption/desorption cycles. A novel advanced oxidation process could degrade more than 95% of the dye. The results show that eggshell is a waste material useful to remove hazardous dyes from wastewater, which may alleviate the environmental impact of dyeing industries.