Some design considerations for polymer-free drug-eluting stents: a mathematical approach

Flexible 3D Nanonetworked Silica Film as a Polymer-Free Drug-Eluting Stent Platform to Effectively Suppress Tissue Hyperplasia in Rat Esophagus

Loading and eluting drugs on self-expandable metallic stents (SEMSs) can be challenging in terms of fabrication, mechanical stability, and therapeutic effects. In this study, a flexible 3D nanonetworked silica film (NSF) capable of withstanding mechanical stress during dynamic expansion is constructed to function as a drug delivery platform on an entire SEMS surface. Despite covering a broad curved area, the synthesized NSF is defect-free and thin enough to increase the stent strut diameter (110 µm) by only 0.4 percent (110.45 µm). The hydrophobic modification of the surface enables loading of 4.7 times the sirolimus (SRL) concentration in NSF than Cypher, polymer-coated commercial stent, which is based on the same thickness of coating layer. Furthermore, SRL-loaded NSF exhibits a twofold delay in release compared to the control group without NSF. The SRL-loaded NSF SEMS significantly suppresses stent-induced tissue hyperplasia than the control SEMS in the rat esophagus (all variables, p < 0.05). Thus, the developed NSF is a promising polymer-free drug delivery platform to efficiently treat esophageal stricture.

Engineered extracellular vesicles and their mimics in cardiovascular diseases

Cardiovascular diseases (CVDs) are the leading cause of death worldwide. Current pharmacological interventions for the CVDs suffer from low bioavailability, low retention rate, poor targeting, drug resistance complicated side effects. Extracellular vesicles (EVs), which are lipid vesicles secreted by cells, play key roles in pathological processes of CVDs. Engineered EVs and EV mimics with superior properties can overcome limitations of traditional medicine, thus emerging as alternative therapeutic options for the CVDs. In this Review, we summarized basic concepts of EVs and EV mimics, highlighted engineering strategies, and lastly discussed applications of engineered EVs and EV mimics against the CVDs. We believe this Review can provide some new insights on engineering EVs and EV mimics and facilitate their application in precise control of CVDs.

Evolutionary perspective of drug eluting stents: from thick polymer to polymer free approach

Background

Introduction of Bare Metal Stents (BMS) was itself a revolutionary step in the history of the medical industry; however, Drug Eluting Stents (DES) maintained its superiority over BMS in every aspect from restenosis rate to late lumen loss. The reason behind the magnanimous position of the DES in the stent market is the degree of improvement with which it evolves. New and better stents come into the market every year, surpassing their predecessors by many folds.

Literature review

This review paper discusses the journey of DES with supporting clinical trials in detail. In the first generation, there were stainless-steel stents with thicker coatings. Although they had superior results compared to BMS, there was still room for improvement. Afterward came the second-generation stents, which had superior metal platforms with thinner struts and thin coatings. The drugs were also changed from Paclitaxel and Sirolimus to Zotrolimus and Everolimus. These stents performed best; however, there was an issue of permanent coating, which remained intact over the stent surface after complete drug elution and started to cause issues in longer-term studies. Hence, an improved version of DES was introduced to these permanent coatings called the third generation of drug eluting stents, which initially utilized biodegradable polymer and ultimately moved towards polymer free drug coatings. This generation has introduced a unique amalgam of technologies to achieve its polymer free coatings; however, researchers have numerous prospects of growth in this field. This review paper highlights the major coups of stent technology evolution from BMS to DES, from thick polymeric coatings to thin coatings and from durable polymers to polymer free DES.

Conclusion

In conclusion, though the medical industry promptly accepted BMS as the best treatment option for cardiovascular diseases; however, DES has provided even better results than BMS. In DES, the first and second generation has ruled the technology for many years and are still on the shelves. Still, the issues aroused due to durable polymer shifted the attention towards biodegradable drug eluting stents, the third generation growing rapidly. But the scientific community has not restricted themselves and is investigating bioresorbable stents that completely eliminate the polymer intervention in drug eluting stent technology.

Applying Principles of Regenerative Medicine to Vascular Stent Development

Stents are a widely-used device to treat a variety of cardiovascular diseases. The purpose of this review is to explore the application of regenerative medicine principles into current and future stent designs. This review will cover regeneration-relevant approaches emerging in the current research landscape of stent technology. Regenerative stent technologies include surface engineering of stents with cell secretomes, cell-capture coatings, mimics of endothelial products, surface topography, endothelial growth factors or cell-adhesive peptides, as well as design of bioresorable materials for temporary stent support. These technologies are comparatively analyzed in terms of their regenerative effects, therapeutic effects and challenges faced; their benefits and risks are weighed up for suggestions about future stent developments. This review highlights two unique regenerative features of stent technologies: selective regeneration, which is to selectively grow endothelial cells on a stent but inhibit the proliferation and migration of smooth muscle cells, and stent-assisted regeneration of ischemic tissue injury.

Drug-eluting stents for the treatment of coronary artery disease: A review of recent advances

INTRODUCTION

Percutaneous coronary intervention is a widely used procedure for the treatment of coronary artery disease to relieve narrowing or occlusion and improve blood supply. Although only balloon angioplasty was performed in the early period, coronary stents were developed later and coronary drug-eluting stents were introduced to decrease in-stent restenosis, which is related to the proliferation and migration of vascular smooth muscle cells.

AREAS COVERED

The drug-eluting stents are composed of a metallic or polymeric platform, specific drug, and polymers or coating for drug release. In this article, the recent advances in drug-eluting stent technologies for the treatment of coronary artery disease and adjunctive antiplatelet therapy after drug-eluting stent implantation will be reviewed.

EXPERT OPINION

The need for further advances in drug-eluting stents or fully bioresorbable coronary scaffolds still exists to improve patient survival or clinical outcomes. The use for different actions or of combinations of drugs with several actions can be potential. Technological refinement and progress in manufacturing to improve mechanical integrity are needed, particularly for fully bioresorbable scaffolds. For antiplatelet therapy after stenting, clinical bleeding reduction strategies, such as a shortened duration of dual-antiplatelet therapy, are in progress.

Rapid antibacterial activity of anodized aluminum-based materials impregnated with quaternary ammonium compounds for high-touch surfaces to limit transmission of pathogenic bacteria

Infections caused by multidrug-resistant bacteria are a major public health problem. Their transmission is strongly linked to cross contamination via inert surfaces, which can serve as reservoirs for pathogenic microorganisms. To address this problem, antibacterial materials applied to high-touch surfaces have been developed. However, reaching a rapid and lasting effectiveness under real life conditions of use remains challenging. In the present paper, hard-anodized aluminum (AA) materials impregnated with antibacterial agents (quaternary ammonium compounds (QACs) and/or nitrate silver (AgNO₃)) were prepared and characterized. The thickness of the anodized layer was about 50 μm with pore diameter of 70 nm. AA with QACs and/or AgNO₃ had a water contact angle varying between 45 and 70°. The antibacterial activity of the materials was determined under different experimental settings to better mimic their use, and included liquid, humid, and dry conditions. AA-QAC surfaces demonstrated excellent efficiency, killing >99.9% of bacteria in 5 min on a wide range of Gram-positive (Staphylococcus aureus, Clostridioides difficile, vancomycin-resistant Enterococcus faecium) and Gram-negative (streptomycin-resistant Salmonella typhimurium and encapsulated Klebsiella pneumoniae) pathogens. AA-QACs showed a faster antibacterial activity (from 0.25 to 5 min) compared with antibacterial copper used as a reference (from 15 min to more than 1 h). We show that to maintain their high performance, AA-QACs should be used in low humidity environments and should be cleaned with solutions composed of QACs. Altogether, AA-QAC materials constitute promising candidates to prevent the transmission of pathogenic bacteria on high-touch surfaces.

Exosome-eluting stents for vascular healing after ischaemic injury

Drug-eluting stents implanted after ischaemic injury reduce the proliferation of endothelial cells and vascular smooth muscle cells and thus neointimal hyperplasia. However, the eluted drug also slows down the re-endothelialization process, delays arterial healing and can increase the risk of late restenosis. Here we show that stents releasing exosomes derived from mesenchymal stem cells in the presence of reactive oxygen species enhance vascular healing in rats with renal ischaemia-reperfusion injury, promoting endothelial cell tube formation and proliferation, and impairing the migration of smooth muscle cells. Compared with drug-eluting stents and bare-metal stents, the exosome-coated stents accelerated re-endothelialization and decreased in-stent restenosis 28 days after implantation. We also show that exosome-eluting stents implanted in the abdominal aorta of rats with unilateral hindlimb ischaemia regulated macrophage polarization, reduced local vascular and systemic inflammation, and promoted muscle tissue repair.

Surface engineering at the nanoscale: A way forward to improve coronary stent efficacy

Coronary in-stent restenosis and late stent thrombosis are the two major inadequacies of vascular stents that limit its long-term efficacy. Although restenosis has been successfully inhibited through the use of the current clinical drug-eluting stent which releases antiproliferative drugs, problems of late-stent thrombosis remain a concern due to polymer hypersensitivity and delayed re-endothelialization. Thus, the field of coronary stenting demands devices having enhanced compatibility and effectiveness to endothelial cells. Nanotechnology allows for efficient modulation of surface roughness, chemistry, feature size, and drug/biologics loading, to attain the desired biological response. Hence, surface topographical modification at the nanoscale is a plausible strategy to improve stent performance by utilizing novel design schemes that incorporate nanofeatures via the use of nanostructures, particles, or fibers, with or without the use of drugs/biologics. The main intent of this review is to deliberate on the impact of nanotechnology approaches for stent design and development and the recent advancements in this field on vascular stent performance.

Recent advances and directions in the development of bioresorbable metallic cardiovascular stents: Insights from recent human and in vivo studies

Over the past two decades, significant advancements have been made regarding the material formulation, iterative design, and clinical translation of metallic bioresorbable stents. Currently, magnesium-based (Mg) stent devices have remained at the forefront of bioresorbable stent material development and use. Despite substantial advances, the process of developing novel absorbable stents and their clinical translation is time-consuming, expensive, and challenging. These challenges, coupled with the continuous refinement of alternative bioresorbable metallic bulk materials such as iron (Fe) and zinc (Zn), have intensified the search for an ideal absorbable metallic stent material. Here, we discuss the most recent pre-clinical and clinical evidence for the efficacy of bioresorbable metallic stents and material candidates. From this perspective, strategies to improve the clinical performance of bioresorbable metallic stents are considered and critically discussed, spanning material alloy development, surface manipulations, material processing techniques, and preclinical/biological testing considerations. STATEMENT OF SIGNIFICANCE: Recent efforts in using Mg, Fe, and Zn based materials for bioresorbable stents include elemental profile changes as well as surface modifications to improve each of the three classes of materials.  Although a variety of alloys for absorbable metallic stents have been developed, the ideal absorbable stent material has not yet been discovered. This review focuses on the state of the art for bioresorbable metallic stent development. It covers the three bulk materials used for degradable stents (Mg, Fe, and Zn), and discusses their advances from a translational perspective. Strategies to improve the clinical performance of bioresorbable metallic stents are considered and critically discussed, spanning material alloy development, surface manipulations, material processing techniques, and preclinical/biological testing considerations.

Current concepts regarding drug dosing for peripheral stents

Drug-eluting stent (DES) are the mainstay therapy for the treatment of coronary artery disease. Stent design and drug-elution strategies have evolved over the years leading to the last generation DES which shows optimal safety and efficacy outcome. Peripheral arteries have different mechanical and biological features and the lessons learned from the coronary field have been difficult to introduce into the development of peripheral vascular technologies. First, due to its complex biomechanical behavior the use of metallic stents is limited in some vascular segments (i.e., distal superficial fermoral artery [SFA]). Also, peripheral vascular atherosclerosis is different containing higher levels of plaque burden and calcium. Finally, peripheral arterial disease tends to be more aggressive including longer lesions and higher incidence of total chronic occlusion. In general terms, restenosis in the peripheral vascular territory is more aggressive and occurs at a later time (~12 months) requiring a different pharmacokinetic profile compared to coronary technologies. Several strategies have been evaluated in the peripheral arteries raging from the bare metal stent to the drug coated balloon and drug eluting stent with outcome varying depending on the different field of application (i.e. SFA and below-the-knee). Results coming from the clinical trial are encouraging but further studies and direct comparison among the different technologies are demanded to determine the best therapy for peripheral vascular disease.

Modelling drug release from polymer-free coronary stents with microporous surfaces

Traditional coronary drug-eluting stents (DES) are made from metal and are coated with a permanent polymer film containing an anti-proliferative drug. Subsequent to stent deployment in a diseased coronary artery, the drug releases into the artery wall and helps prevent restenosis by inhibiting the proliferation of smooth muscle cells. Although this technology has proven to be remarkably successful, there are ongoing concerns that the presence of a polymer in the artery can lead to deleterious medical complications, such as late stent thrombosis. Polymer-free DES may help overcome such shortcomings. However, the absence of a rate-controlling polymer layer makes optimisation of the drug release profile a particular challenge. The use of microporous stent surfaces to modulate the drug release rate is an approach that has recently shown particularly promising clinical results. In this study, we develop a mathematical model to describe drug release from such stents. In particular, we develop a mathematical model to describe drug release from microporous surfaces. The model predicts a two-stage release profile, with a relatively rapid initial release of most of the drug, followed by a slower release of the remaining drug. In the model, the slow release phase is accounted for by an adsorption/desorption mechanism close to the stent surface. The theoretical predictions are compared with experimental release data obtained in our laboratory, and good agreement is found. The valuable insights provided by our model will serve as a useful guide for designing the enhanced polymer-free stents of the future.

The Newest Generation of Drug-eluting Stents and Beyond

There has been a great evolution in the development of coronary stents in order to avoid both restenosis and thrombosis. Improvements have led to improvements in the design and conformation of metallic or resorbable structures, with an adequate balance between trackability and radial force, the development of antiproliferative drugs and the polymers to control release and allow adequate endothelialisation and an optimal duration of the antiplatelet regimen. Some suggestions are provided about the ideal characteristics of future coronary stents.

Assessing the potential of mathematical modelling in designing drug-releasing orthopaedic implants

Orthopaedic implants have been the subject of intense research in recent years, with academics, clinicians and industrialists seeking to broaden our understanding of their function and potential consequences within the human body. Current research is focussed on ways to improve the integration of an orthopaedic device within the body, whether it be to encourage better osseointegration, combat possible infection or stem the foreign body response. A key emerging strategy is the controlled delivery of therapeutics from the device, which may take the form of, for example, antibiotics, analgesics, anti-inflammatories or growth factors. However, the optimal device design that gives rise to the desired controlled release has yet to be defined. There are many examples in the literature of experimental approaches which attempt to tackle this issue. However, the necessity of having to conduct multiple experiments to test different scenarios is a major drawback of this approach. So enter stage left: mathematical modelling. Using a mathematical modelling approach can provide much more than experiments in isolation. For instance, a mathematical model can help identify key drug release mechanisms and uncover the rate limiting processes; allow for the estimation of values of the parameters controlling the system; quantify the effect of the interaction with the biological environment; and aid with the design of optimisation strategies for controlled drug release. In this paper we review current experimental approaches and some relevant mathematical models and suggest the future direction of such approaches in this field.

Modelling the Impact of Atherosclerosis on Drug Release and Distribution from Coronary Stents

Although drug-eluting stents (DES) are now widely used for the treatment of coronary heart disease, there remains considerable scope for the development of enhanced designs which address some of the limitations of existing devices. The drug release profile is a key element governing the overall performance of DES. The use of in vitro, in vivo, ex vivo, in silico and mathematical models has enhanced understanding of the factors which govern drug uptake and distribution from DES. Such work has identified the physical phenomena determining the transport of drug from the stent and through tissue, and has highlighted the importance of stent coatings and drug physical properties to this process. However, there is limited information regarding the precise role that the atherosclerotic lesion has in determining the uptake and distribution of drug. In this review, we start by discussing the various models that have been used in this research area, highlighting the different types of information they can provide. We then go on to describe more recent methods that incorporate the impact of atherosclerotic lesions.

Drug-Eluting Stent Design is a Determinant of Drug Concentration at the Endothelial Cell Surface

Although drug-eluting stents (DES) have greatly reduced arterial restenosis, there are persistent concerns about stent thrombosis. DES thrombosis is attributable to retarded vascular re-endothelialization due to both stent-induced flow disturbance and the inhibition by the eluted drug of endothelial cell proliferation and migration. The present computational study aims to determine the effect of DES design on both stent-induced flow disturbance and the concentration of eluted drug at the arterial luminal surface. To this end, we consider three closed-cell stent designs that resemble certain commercial stents as well as three "idealized" stents that provide insight into the impact of specific characteristics of stent design. To objectively compare the different stents, we introduce the Stent Penalty Index (SPI), a dimensionless quantity whose value increases with both the extent of flow disturbance and luminal drug concentration. Our results show that among the three closed-cell designs studied, wide cell designs lead to lower SPI and are thus expected to have a less adverse effect on vascular re-endothelialization. For the idealized stent designs, a spiral stent provides favorable SPI values, whereas an intertwined ring stent leads to an elevated SPI. The present findings shed light onto the effect of stent design on the concentration of the eluted drug at the arterial luminal surface, an important consideration in the assessment of DES performance.