Antifungal activity of a β-peptide in synthetic urine media: Toward materials-based approaches to reducing catheter-associated urinary tract fungal infections

Synergic Effect of the Antimicrobial Peptide ToAP2 and Fluconazole on Candida albicans Biofilms

Candida albicans is one of the agents of invasive candidiasis, a life-threatening disease strongly associated with hospitalization, particularly among patients in intensive care units with central venous catheters. This study aimed to evaluate the synergistic activity of the antifungal peptide ToAP2 combined with fluconazole against C. albicans biofilms grown on various materials. We tested combinations of different concentrations of the peptide ToAP2 with fluconazole on C. albicans biofilms. These biofilms were generated on 96-well plates, intravenous catheters, and infusion tubes in RPMI medium at two maturation stages. Scanning electron microscopy and atomic force microscopy were employed to assess the biofilm structure. We also evaluated the expression of genes previously proven to be involved in C. albicans biofilm formation in planktonic and biofilm cells after treatment with the peptide ToAP2 using qPCR. ToAP2 demonstrated a synergistic effect with fluconazole at concentrations up to 25 µM during both the early and mature stages of biofilm formation in 96-well plates and on medical devices. Combinations of 50, 25, and 12.5 µM of ToAP2 with 52 µM of fluconazole significantly reduced the biofilm viability compared to individual treatments and untreated controls. These results were supported by substantial structural changes in the biofilms observed through both scanning and atomic force microscopy. The gene expression analysis of C. albicans cells treated with 25 µM of ToAP2 revealed a decrease in the expression of genes associated with membrane synthesis, along with an increase in the expression of genes involved in efflux pumps, adhesins, and filamentation. Our results highlight the efficacy of the combined ToAP2 and fluconazole treatment against C. albicans biofilms. This combination not only shows therapeutic potential but also suggests its utility in developing preventive biofilm tools for intravenous catheters.

Establishing Quantifiable Guidelines for Antimicrobial α/β-Peptide Design: A Partial Least-Squares Approach to Improve Antimicrobial Activity and Reduce Mammalian Cell Toxicity

Antimicrobial peptides (AMPs) are promising candidates to combat pathogens that are resistant to conventional antimicrobial drugs because they operate through mechanisms that involve membrane disruption. However, the use of AMPs in clinical settings has been limited, at least in part, by their susceptibility to proteolytic degradation and their lack of selectivity toward pathogenic microbes vs mammalian cells. We recently reported on the design of α- and β-peptide oligomers structurally templated upon the naturally occurring α-helical AMP aurein 1.2. These α/β-peptide oligomers are more proteolytically stable than aurein 1.2 and have several other attributes that render them attractive as alternatives to conventional AMPs. This study describes the influence of peptide physicochemical properties on the broad-spectrum activity of aurein 1.2-based α/β-peptide mimics against nine bacterial, fungal, and mammalian cell lines. We used a partial least-squares regression (PLSR)-supervised machine learning model to quantify and visualize relationships between experimentally determined physicochemical properties (e.g., hydrophobicity, charge, and helicity) and experimentally measured cell-type-specific activities of 21 peptides in a 149-member α/β-peptide library. Using this approach, we identified several peptides that were predicted to exhibit enhanced broad-spectrum selectivity, a measure that evaluates antimicrobial activity relative to mammalian cell toxicity compared to aurein 1.2. Experimental validation demonstrated high model predictive performance, and characterization of compounds with the highest broad-spectrum selectivity revealed peptide hydrophobicity, helicity, and helical rigidity to be strong predictors of broad-spectrum selectivity. The most selective peptide identified from the model prediction has more than a 13-fold improvement in broad-spectrum selectivity than that of aurein 1.2, demonstrating the ability of using PLSR models to identify quantitative structure-function relationships for nonstandard amino acid-containing peptides. Overall, this work establishes quantifiable guidelines for the rational design of helical antimicrobial α/β-peptides and identifies promising new α/β-peptides with significantly reduced mammalian toxicities and improved antifungal and antibacterial activities relative to aurein 1.2.

In vitro Antifungal Activity of a Novel Antimicrobial Peptide AMP-17 Against Planktonic Cells and Biofilms of Cryptococcus neoformans

Background

Cryptococcus neoformans is a common human fungal pathogen in immunocompromised people, as well as a prevalent cause of meningitis in HIV-infected individuals. With the emergence of clinical fungal resistance and the shortage of antifungal drugs, it is urgent to discover novel antifungal agents. AMP-17, a novel antimicrobial peptide from Musca domestica, has antifungal activity against C. neoformans. However, its antifungal and anti-biofilm activities remain unclear. Thus, this study aimed to evaluate the antifungal activity of AMP-17 against planktonic cells and biofilms of C. neoformans.

Methods

The minimum inhibitory concentration (MIC), the biofilm inhibitory and eradicating concentration (BIC and BEC) were determined by the broth microdilution assay or the 2, 3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide (XTT) reduction assay, respectively. The inhibitory and killing activities of AMP-17 against C. neoformans were investigated through the time-inhibition/killing kinetic curves. The potential antifungal mechanism of AMP-17 was detected by flow cytometry, scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM). The efficiency of AMP-17 against biofilm formation or preformed biofilm was evaluated by crystal violet staining and XTT reduction assays. The morphology of pre-biofilms was tested by optical microscopy (OM) and CLSM.

Results

AMP-17 exhibited in vitro antifungal activity against C. neoformans planktonic cells and biofilms, with MICs of 4~16 μg/ml, BIC₈₀ and BEC₈₀ of 16~32 μg/ml, 64~128 μg/ml, respectively. In addition, the 2× and 4× MIC of AMP-17 exhibited similar inhibition levels compared to the 2× and 4× MIC of the clinical drugs FLC and AMB in C. neoformans growth. Moreover, the time-kill results showed that AMP-17 (8× MIC) did not significantly eliminate colony forming units (CFU) after 6 h of treatment; however, there was 2.9-log reduction in CFU of C. neoformans. Furthermore, increasing of the permeability of the fungal cell membrane was observed with the treatment of AMP-17, since the vast change as fungal leakage and cell membrane disruption. However, the DNA binding assay of AMP-17 indicated that the peptide did not target DNA. Besides, AMP-17 was superior in inhibiting and eradicating biofilms of C. neoformans compared with FLC.

Conclusion

AMP-17 exhibited potential in vitro antifungal activity against the planktonic cells and biofilms of C. neoformans, and it may disrupt fungal cell membranes through multi-target interactions, which provides a promising therapeutic strategy and experimental basis for Cryptococcus-associated infections.

Antimicrobial peptide-based materials: opportunities and challenges

The multifunctional properties of antimicrobial peptides (AMPs) make them attractive candidates for the treatment of various diseases. AMPs are considered alternatives to antibiotics due to the rising number of multidrug-resistant...

Dimeric lipo-α/sulfono-γ-AA hybrid peptides as broad-spectrum antibiotic agents

There is an urgent need to develop novel antibiotic agents that can combat emerging drug resistance. Herein, we report the design and investigation of a class of short dimeric antimicrobial lipo-α/sulfono-γ-AA hybrid peptides. Some of these peptides exhibit potent and broad-spectrum antimicrobial activity toward both clinically related Gram-positive and Gram-negative bacteria. The TEM study suggests that these hybrid peptides can compromise bacterial membranes and lead to bacterial death. Membrane depolarization and fluorescence microscopy studies also indicate that the mechanism of action is analogous to host-defense peptides (HDPs). Furthermore, the lead compound shows the ability to effectively inhibit biofilms formed from MRSA and E. coli. Further development of the short dimeric lipo-α/sulfono-γ-AA hybrid peptides may lead to a new generation of antimicrobial biomaterials to combat drug resistance.

Histatin 5 variant reduces Candida albicans biofilm viability and inhibits biofilm formation

Candida albicans is a commensal organism and opportunistic pathogen that can form biofilms that colonize surfaces of medical devices, such as implants, catheters, and dentures. Compared to planktonic C. albicans cells, cells in biofilms exhibit increased resistance to treatment. Histatin 5 (Hst-5) is an antimicrobial peptide that is natively secreted by human salivary glands and has strong antifungal activity against C. albicans. However, C. albicans produces secreted aspartic proteases (Saps) that can cleave and inactivate Hst-5, limiting its antifungal properties. We previously showed that residue substitutions K11R and K17R within Hst-5 improve its antifungal activity and prevent proteolytic degradation by Saps when treating planktonic C. albicans. Here, we investigated the use of the K11R-K17R peptide as an alternative therapeutic against C. albicans biofilms by assessing its ability to reduce viability of pre-formed biofilms and to inhibit the formation of biofilms and showed that K11R-K17R had improved activity compared to Hst-5. Based on these results, we incorporated K11R-K17R and Hst-5 into polyelectrolyte multilayer (PEM) surface coatings and demonstrated that films functionalized with K11R-K17R reduced the formation of C. albicans biofilms. Our results demonstrate the therapeutic potential of the K11R-K17R Hst-5 variant in preventing and treating biofilms.

Prevention of urinary infection through the incorporation of silver-ricinoleic acid-polystyrene nanoparticles on the catheter surface

Nosocominal infections associated with biofilm formation on urinary catheters cause serious complications. The aim of this study was to investigate the feasibility of the polyurethane (PU) catheter modified with tetracycline hydrochloride (TCH) attached Ag nanoparticles embedded PolyRicinoleic acid-Polystyrene Nanoparticles (PU-TCH-AgNPs-PRici-PS NPs) and the influence on antimicrobial and antibiofilm activity of urinary catheters infected by Escherichia coli and Staphylococcus aureus. For this purpose, AgNPs embedded PRici graft PS graft copolymers (AgNPs-PRici-g-PS) were synthesized via free radical polymerization and characterized by FTIR, HNMR and DSC. AgNPs-PRici-PS NPs were prepared and optimized by the different parameters and the optimized size of nanoparticle was found as about 150 ± 1 nm. The characterization of the nanoparticles and the morphological evaluation were carried out by FTIR and SEM. Short term stability of nanoparticles was realised at 4°C for 30 days. In vitro release profiles of TCH and Ag NPs were also investigated. The formation of biofilm on PU modified TCH-Ag NPs-PRici-PS NPs, was evaluated and the biocompatibility test of the nanoparticles was realized via the mouse fibroblast (L929) and mouse urinary bladder cells (G/G An1). This is the first time that TCH-AgNPs-PRici-PS NPs used in the modification of PU catheter demonstrated high antimicrobial and antibiofilm activities against the urinary tract infection.

Recent Advances in Surface Nanoengineering for Biofilm Prevention and Control. Part II: Active, Combined Active and Passive, and Smart Bacteria-Responsive Antibiofilm Nanocoatings

The second part of our review describing new achievements in the field of biofilm prevention and control, begins with a discussion of the active antibiofilm nanocoatings. We present the antibiofilm strategies based on antimicrobial agents that kill pathogens, inhibit their growth, or disrupt the molecular mechanisms of biofilm-associated increase in resistance and tolerance. These agents of various chemical structures act through a plethora of mechanisms targeting vital bacterial metabolic pathways or cellular structures like cell walls and cell membranes or interfering with the processes that underlie different stages of the biofilm life cycle. We illustrate the latter action mechanisms through inhibitors of the quorum sensing signaling pathway, inhibitors of cyclic-di-GMP signaling system, inhibitors of (p)ppGpp regulated stringent response, and disruptors of the biofilm extracellular polymeric substances matrix (EPS). Both main types of active antibiofilm surfaces, namely non-leaching or contact killing systems, which rely on the covalent immobilization of the antimicrobial agent on the surface of the coatings and drug-releasing systems in which the antimicrobial agent is physically entrapped in the bulk of the coatings, are presented, highlighting the advantages of each coating type in terms of antibacterial efficacy, biocompatibility, selective toxicity, as well as drawbacks and limitations. Developments regarding combined strategies that join in a unique platform, both passive and active elements are not omitted. In such platforms with dual functionality, passive and active strategies can be applied either simultaneously or sequentially. We especially emphasize those systems that can be reversely and repeatedly switched between the non-fouling status and the bacterial killing status, thereby allowing several bacteria-killing/surface regeneration cycles to be performed without significant loss of the initial bactericidal activity. Eventually, smart antibiofilm coatings that release their antimicrobial payload on demand, being activated by various triggers such as changes in local pH, temperature, or enzymatic triggers, are presented. Special emphasis is given to the most recent trend in the field of anti-infective surfaces, specifically smart self-defensive surfaces for which activation and switch to the bactericidal status are triggered by the pathogens themselves.

Implantable Medical Devices and Tissue Engineering: An Overview of Manufacturing Processes and the Use of Polymeric Matrices for Manufacturing and Coating their Surfaces

Medical devices are important diagnosis and therapy tools for several diseases which include a wide range of products. Technological advances in this area have been proposed to reduce adverse complication incidences. New technologies and manufacturing processes, as well as the development of new materials or medical devices with modified surface and the use of biodegradable polymeric devices such as a substrate for cell culture in the field of tissue engineering, have attracted considerable attention in recent years by the scientific community intended to produce medical devices with superior properties and morphology. This review article focused on implantable devices, addresses the major advances in the biomedical field related to the devices manufacture processes such as 3D printing and hot melting extrusion, and the use of polymer matrices composed of copolymers, blends, nanocomposites or grafted with antiproliferative drugs for manufacturing and/or coating the devices surface.

Antimicrobial and antibiofilm activity of the EeCentrocin 1 derived peptide EC1-17KV via membrane disruption

Background

The antibiotic resistance and biofilm formation of pathogenic microbes exacerbate the difficulties of anti-infection therapy in the clinic. The structural modification of antimicrobial peptides (AMP) is an effective strategy to develop novel anti-infective agents.

Method

Seventeen amino acids (AA) in the longer chain of EeCentrocin 1 (from the edible sea-urchin Echinus esculentus) were truncated and underwent further modification. To produce lead peptides with low toxicity and high efficacy, the antimicrobial activity or cytotoxicity of peptides was evaluated against various multidrug-resistant bacteria/fungi or mammalian cells in vivo/ in vitro. In addition, the stability and modes of action of the lead peptide were investigated.

Findings

EC1-17KV displayed potent activity and an expanded antimicrobial spectrum, especially against drug-resistant gram-negative bacteria and fungi, attributable to its enhanced amphiphilicity and net charge. In addition, it exhibits bactericidal/fungicidal activity and effectively increased the animal survival rate and mitigated the histopathological damage induced by multidrug-resistant P. aeruginosa or C. albicans in infected mice or G. mellonella. Moreover, EC1-17KV had a poor ability to induce resistance in bacteria and fungi and exhibited desirable high-salt/high-temperature tolerance properties. In bacteria, EC1-17KV promoted divalent cation release to damage bacterial membrane integrity. In fungi, it changed C. albicans membrane fluidity to increase membrane permeabilization or reduced hyphal formation to suppress biofilm formation.

Interpretation

EC1-17KV is a promising lead peptide for the development of antimicrobial agents against antibiotic resistant bacteria and fungi.

Funding

This work was funded by the National Natural Science Foundation of China (No. 81673483, 81803591); National Science and Technology Major Project Foundation of China (2019ZX09721001-004-005); National Key Research and Development Program of China (2018YFA0902000); "Double First-Class" University project (CPU2018GF/GY16); Natural Science Foundation of Jiangsu Province of China (No. BK20180563); and A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions.

Design of Heptad Repeat Amphiphiles Based on Database Filtering and Structure-Function Relationships to Combat Drug-Resistant Fungi and Biofilms

Due to the emergence of reports of multidrug-resistant fungi, infections caused by multidrug-resistant fungi and biofilms are considered to be a global threat to human health due to the lack of effective broad-spectrum drugs. Here, we developed a series heptad repeat sequences based on an antimicrobial peptide database (APD) and structure-function relationships. Among the developed peptides, the target peptide ACR3 exhibited good activity against all fungi and bacteria tested, including fluconazole-resistant Candida albicans (C. albicans) and methicillin-resistant Staphylococcu saureus (S. aureus), while demonstrating relatively low toxicity and good salt tolerance. The peptide ACR3 inhibits the formation of C. albicans biofilms and has a therapeutic effect on mature biofilms in vitro and in vivo. Moreover, we did not observe any resistance of C. albicans and E. coli against the peptide ACR3. A series of assays and microscopy were used to analyze the antimicrobial mechanism. These results showed that the antimicrobial activity of the peptide ACR3 utilizes a multimodal mechanism that degrades the cell wall barrier, alters the cytoplasmic membrane electrical potential, and induces intracellular reactive oxygen species (ROS) production. In general, the peptide ACR3 is a potent antibacterial agent that shows great potential for use in biomedical coatings and healthcare formulas to combat the growing threat of fungal and bacterial infection.

Complexation between antimicrobial peptides and polyelectrolytes

As a result of increasing bacterial resistance against antibiotics, we are facing an emerging health crisis, in which 'simple' infections may no longer be treatable. One class of molecules attracting interest in this context is antimicrobial peptides (AMPs), and considerable research efforts have been directed to identifying selective and potent AMPs. In addition, since in vivo delivery of AMPs is challenging, there is an emerging awareness that successful development of AMP therapeutics can be facilitated by careful design of AMPs delivery systems. In the present overview, we discuss polyelectrolyte complexation as a strategy to deliver AMPs. In doing so, key factors for AMP-polyelectrolyte complexation are illustrated for AMP-polyelectrolyte nanoparticle formation, as well as for AMP incorporation in polyelectrolyte microgels and multilayer structures, and consequences of these for functional performance exemplified.

Preventing S. aureus biofilm formation on titanium surfaces by the release of antimicrobial β-peptides from polyelectrolyte multilayers

Staphylococcus aureus infections represent the major cause of titanium based-orthopaedic implant failure. Current treatments for S. aureus infections involve the systemic delivery of antibiotics and additional surgeries, increasing health-care costs and affecting patient's quality of life. As a step toward the development of new strategies that can prevent these infections, we build upon previous work demonstrating that the colonization of catheters by the fungal pathogen Candida albicans can be prevented by coating them with thin polymer multilayers composed of chitosan (CH) and hyaluronic acid (HA) designed to release a β-amino acid-based peptidomimetic of antimicrobial peptides (AMPs). We demonstrate here that this β-peptide is also potent against S. aureus (MBPC = 4 μg/mL) and characterize its selectivity toward S. aureus biofilms. We demonstrate further that β-peptide-containing CH/HA thin-films can be fabricated on the surfaces of rough planar titanium substrates in ways that allow mammalian cell attachment and permit the long-term release of β-peptide. β-Peptide loading on CH/HA thin-films was then adjusted to achieve release of β-peptide quantities that selectively prevent S. aureus biofilms on titanium substrates in vitro for up to 24 days and remained antimicrobial after being challenged sequentially five times with S. aureus inocula, while causing no significant MC3T3-E1 preosteoblast cytotoxicity compared to uncoated and film-coated controls lacking β-peptide. We conclude that these β-peptide-containing films offer a novel and promising localized delivery approach for preventing orthopaedic implant infections. The facile fabrication and loading of β-peptide-containing films reported here provides opportunities for coating other medical devices prone to biofilm-associated infections. STATEMENT OF SIGNIFICANCE: Titanium (Ti) and its alloys are used widely in orthopaedic devices due to their mechanical strength and long-term biocompatibility. However, these devices are susceptible to bacterial colonization and the subsequent formation of biofilms. Here we report a chitosan and hyaluronic acid polyelectrolyte multilayer-based approach for the localized delivery of helical, cationic, globally amphiphilic β-peptide mimetics of antimicrobial peptides to inhibit S. aureus colonization and biofilm formation. Our results reveal that controlled release of this β-peptide can selectively kill S. aureus cells without exhibiting toxicity toward MC3T3-E1 preosteoblast cells. Further development of this polymer-based coating could result in new strategies for preventing orthopaedic implant-related infections, improving outcomes of these titanium implants.

Epidemiology of pathogens and antimicrobial resistanceof catheter-associated urinary tract infections in intensivecare units: A systematic review and meta-analysis

BACKGROUND

In the intensive care unit (ICU), catheter-associated urinary tract infection (CAUTI) is the most common urinary tract infection. Nevertheless, there is no systematic review to investigate the epidemiology of pathogens and antimicrobial resistance of CAUTIs in ICUs.

METHODS

Eight electronic databases were searched for eligible studies. A meta-analysis was performed to calculate the CAUTI incidence per 1,000 catheter days, the proportion of pathogen distribution, and the resistance rate with R3.3.2 software.

RESULTS

Seventy-five studies were included. The total weighted CAUTI incidence per 1,000 catheter days was 7.78. Gram-negative bacteria (47.46%), fungi (27.81%), and gram-positive bacteria (19.06%) were isolated. Candida spp (27.4%), Escherichia spp (23.41%), and Enterococcus spp (15.0%) were the most frequent pathogens. Candida albicans, Candida tropicalis, and Candida glabrata were generally resistant to itraconazole, with resistance rates of 42.5%, 53.0%, and 59.7%, respectively. Escherichia spp displayed high rates of resistance to ampicillin (87.3%), ciprofloxacin (71.7%), and norfloxacin (71.2%). Enterococcus spp showed high rates of resistance to erythromycin (83.9%), penicillin (76.7%), and levofloxacin (73.8%).

CONCLUSIONS

In ICUs, the CAUTI incidence per 1,000 catheter days is high. CAUTIs were mainly caused by gram-negative bacteria that were resistant to common antibiotics. There is a pressing demand for future research into CAUTI, including effective prevention, an understanding of antimicrobial resistance mechanisms, and development of new antibiotics for patient safety.

Design and Assessment of Anti-Biofilm Peptides: Steps Toward Clinical Application

Highly antibiotic resistant, microbial communities, referred to as biofilms, cause various life-threatening infections in humans. At least two-thirds of all clinical infections are biofilm associated, and antibiotic therapy regularly fails to cure patients. Anti-biofilm peptides represent a promising approach to treat these infections by targeting biofilm-specific characteristics such as highly conserved regulatory mechanisms. They are being considered for clinical application and we discuss here key factors in discovery, design, and application, particularly the implementation of host-mimicking conditions, that are required to enable the successful advancement of potent anti-biofilm peptides from the bench to the clinic.

On-demand release of Candida albicans biofilms from urinary catheters by mechanical surface deformation

Candida albicans is a leading cause of catheter-associated urinary tract infections and elimination of these biofilm-based infections without antifungal agents would constitute a significant medical advance. A novel urinary catheter prototype that utilizes on-demand surface deformation is effective at eliminating bacterial biofilms and here the broader applicability of this prototype to remove fungal biofilms has been demonstrated. C. albicans biofilms were debonded from prototypes by selectively inflating four additional intralumens surrounding the main lumen of the catheters to provide the necessary surface strain to remove the adhered biofilm. Deformable catheters eliminated significantly more biofilm than the controls (>90% eliminated vs 10% control; p < 0.001). Mechanical testing revealed that fungal biofilms have an elastic modulus of 45 ± 6.7 kPa with a fracture energy of 0.4-2 J m^-2. This study underscores the potential of mechanical disruption as a materials design strategy to combat fungal device-associated infections.

Combating Drug-Resistant Fungi with Novel Imperfectly Amphipathic Palindromic Peptides

Antimicrobial peptides are an important weapon against invading pathogens and are potential candidates as novel antibacterial agents, but their antifungal activities are not fully developed. In this study, a set of imperfectly amphipathic peptides was developed based on the imperfectly amphipathic palindromic structure R _n(XRXXXRX)R _n ( n = 1, 2; X represents L, I, F, or W), and the engineered peptides exhibited high antimicrobial activities against all fungi and bacteria tested (including fluconazole-resistant Candida albicans), with geometric mean (GM) MICs ranging from 2.2 to 6.62 μM. Of such peptides, 13 (I6) (RRIRIIIRIRR-NH₂) that was Ile rich in its hydrophobic face had the highest antifungal activity (GM_fungi = 1.64 μM) while showing low toxicity and high salt and serum tolerance. It also had dramatic LPS-neutralizing propensity and a potent membrane-disruptive mechanism against microbial cells. In summary, these findings were useful for short AMPs design to combat the growing threat of drug-resistant fungal and bacterial infections.

Antibacterial activities and molecular mechanism of amino-terminal fragments from pig nematode antimicrobial peptide CP-1

High manufacturing costs and weak cell selectivity have limited the clinical application of naturally occurring peptides when faced with an outbreak of drug resistance. To overcome these limitations, a set of antimicrobial peptides was synthesized with the general sequence of (WL)n, where n = 1, 2, 3, and WL was truncated from the N-terminus of Cecropin P1 without initial serine residues. The antimicrobial peptide WL3 exhibited stronger antimicrobial activity against both Gram-negative and Gram-positive microbes than the parental peptide CP-1. WL3 showed no hemolysis even at the highest test concentrations compared to the parental peptide CP-1. The condition sensitivity assays (salts, serum, and trypsin) demonstrated that WL3 had high stability in vitro. Fluorescence spectroscopy and electron microscopy indicated that WL3 killed microbes by means of penetrating the membrane and causing cell lysis. In a mouse model, WL3 was able to significantly reduce the bacteria load in major organs and cytokines (TNF-α, IL-6, and IL-1β) levels in serum. In summary, these findings suggest that WL3, which was modified from a natural antimicrobial peptide, has enormous potential for application as a novel antibacterial agent.

The importance of fungal pathogens and antifungal coatings in medical device infections

In recent years, increasing evidence has been collated on the contributions of fungal species, particularly Candida, to medical device infections. Fungal species can form biofilms by themselves or by participating in polymicrobial biofilms with bacteria. Thus, there is a clear need for effective preventative measures, such as thin coatings that can be applied onto medical devices to stop the attachment, proliferation, and formation of device-associated biofilms. However, fungi being eukaryotes, the challenge is greater than for bacterial infections because antifungal agents are often toxic towards eukaryotic host cells. Whilst there is extensive literature on antibacterial coatings, a far lesser body of literature exists on surfaces or coatings that prevent attachment and biofilm formation on medical devices by fungal pathogens. Here we review strategies for the design and fabrication of medical devices with antifungal surfaces. We also survey the microbiology literature on fundamental mechanisms by which fungi attach and spread on natural and synthetic surfaces. Research in this field requires close collaboration between biomaterials scientists, microbiologists and clinicians; we consider progress in the molecular understanding of fungal recognition of, and attachment to, suitable surfaces, and of ensuing metabolic changes, to be essential for designing rational approaches towards effective antifungal coatings, rather than empirical trial of coatings.

Advances in Development of Antimicrobial Peptidomimetics as Potential Drugs

The rapid emergence of multidrug-resistant pathogens has evolved into a global health problem as current treatment options are failing for infections caused by pan-resistant bacteria. Hence, novel antibiotics are in high demand, and for this reason antimicrobial peptides (AMPs) have attracted considerable interest, since they often show broad-spectrum activity, fast killing and high cell selectivity. However, the therapeutic potential of natural AMPs is limited by their short plasma half-life. Antimicrobial peptidomimetics mimic the structure and biological activity of AMPs, but display extended stability in the presence of biological matrices. In the present review, focus is on the developments reported in the last decade with respect to their design, synthesis, antimicrobial activity, cytotoxic side effects as well as their potential applications as anti-infective agents. Specifically, only peptidomimetics with a modular structure of residues connected via amide linkages will be discussed. These comprise the classes of α-peptoids (N-alkylated glycine oligomers), β-peptoids (N-alkylated β-alanine oligomers), β³-peptides, α/β³-peptides, α-peptide/β-peptoid hybrids, α/γ N-acylated N-aminoethylpeptides (AApeptides), and oligoacyllysines (OAKs). Such peptidomimetics are of particular interest due to their potent antimicrobial activity, versatile design, and convenient optimization via assembly by standard solid-phase procedures.

Can Sophorolipids prevent biofilm formation on silicone catheter tubes?

Given the impact of biofilms in health care environment and the increasing antibiotic resistance and/or tolerance, new strategies for preventing that occurrence in medical devices are obligatory. Thus, biomaterials surface functionalization with active compounds can be a valuable approach. In the present study the ability of the biosurfactants sophorolipids to prevent biofilms formation on silicone rubber aimed for medical catheters was investigated. Sophorolipids produced by Starmerella bombicola, identified by HPLC-MS/MS were used to cover silicone and surface characterization was evaluated through contact angle measurements and FTIR-ATR. Results revealed that sophorolipids presence on silicone surface decreased the hydrophobicity of the material and biofilm formation of Staphylococcus aureus ATCC 25923 and Escherichia coli ATCC 25922. Antibiofilm activity was evaluated through different methods and was more pronounced against S. aureus. Furthermore, biocompatibility of silicone specimens with HaCaT cells was also obtained. From this study it was possible to conclude that sophorolipids seem to be a favourable approach for coating silicone catheters. Such compounds may represent a novel source of antibiofilm agents for technological development passing through strategies of permanent functionalization of surfaces.